/* $OpenBSD: hil.c,v 1.11 2003/06/02 23:28:01 millert Exp $ */ /* * Copyright (c) 2003, Miodrag Vallat. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * */ /* * Copyright (c) 1988 University of Utah. * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: hil.c 1.38 92/01/21$ * * @(#)hil.c 8.2 (Berkeley) 1/12/94 */ #undef HILDEBUG #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * splhigh is extremely conservative but insures atomic operation, * splvm (clock only interrupts) seems to be good enough in practice. */ #define splhil splvm struct cfdriver hil_cd = { NULL, "hil", DV_DULL }; void hilconfig(struct hil_softc *); int hilsubmatch(struct device *, void *, void *); void hil_process_int(struct hil_softc *, u_int8_t, u_int8_t); int hil_process_poll(struct hil_softc *, u_int8_t, u_int8_t); void send_device_cmd(struct hil_softc *sc, u_int device, u_int cmd); void polloff(struct hil_softc *); void pollon(struct hil_softc *); static void hilwait(struct hil_softc *); static void hildatawait(struct hil_softc *); static __inline void hilwait(struct hil_softc *sc) { DELAY(1); while (bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT) & HIL_BUSY) { DELAY(1); } } static __inline void hildatawait(struct hil_softc *sc) { DELAY(1); while (!(bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT) & HIL_DATA_RDY)) { DELAY(1); } } /* * Common HIL bus attachment */ void hil_attach(struct hil_softc *sc, int hil_is_console) { printf("\n"); /* * Initialize loop information */ sc->sc_cmdending = 0; sc->sc_actdev = sc->sc_cmddev = 0; sc->sc_cmddone = 0; sc->sc_cmdbp = sc->sc_cmdbuf; sc->sc_pollbp = sc->sc_pollbuf; sc->sc_console = hil_is_console; } /* * HIL subdevice attachment */ int hildevprint(void *aux, const char *pnp) { struct hil_attach_args *ha = aux; if (pnp != NULL) { printf("\"%s\" at %s id %x", ha->ha_descr, pnp, ha->ha_id); } printf(" code %d", ha->ha_code); if (pnp == NULL) { printf(": %s", ha->ha_descr); } return (UNCONF); } int hilsubmatch(struct device *parent, void *vcf, void *aux) { struct hil_attach_args *ha = aux; struct cfdata *cf = vcf; if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != ha->ha_code) return (0); return ((*cf->cf_attach->ca_match)(parent, vcf, aux)); } void hil_attach_deferred(void *v) { struct hil_softc *sc = v; int tries; u_int8_t db; /* * Initialize the loop: reconfigure, don't report errors, * put keyboard in cooked mode, and enable autopolling. */ db = LPC_RECONF | LPC_KBDCOOK | LPC_NOERROR | LPC_AUTOPOLL; send_hil_cmd(sc, HIL_WRITELPCTRL, &db, 1, NULL); /* * Delay one second for reconfiguration and then read the * data to clear the interrupt (if the loop reconfigured). */ DELAY(1000000); if (bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT) & HIL_DATA_RDY) { db = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); DELAY(1); } /* * The HIL loop may have reconfigured. If so we proceed on, * if not we loop a few times until a successful reconfiguration * is reported back to us. If the HIL loop is still lost after a * few seconds, give up. */ for (tries = 10; tries != 0; tries--) { send_hil_cmd(sc, HIL_READLPSTAT, NULL, 0, &db); if (db & (LPS_CONFFAIL | LPS_CONFGOOD)) break; #ifdef HILDEBUG printf("%s: loop not ready, retrying...\n", sc->sc_dev.dv_xname); #endif DELAY(1000000); } if (tries == 0 || (db & LPS_CONFFAIL)) { printf("%s: no devices\n", sc->sc_dev.dv_xname); return; } /* * At this point, the loop should have reconfigured. * The reconfiguration interrupt has already called hilconfig(). */ send_hil_cmd(sc, HIL_INTON, NULL, 0, NULL); } /* * Asynchronous event processing */ int hil_intr(void *v) { struct hil_softc *sc = v; u_int8_t c, stat; if (cold) return (0); stat = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT); c = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); /* clears interrupt */ DELAY(1); hil_process_int(sc, stat, c); return (1); } void hil_process_int(struct hil_softc *sc, u_int8_t stat, u_int8_t c) { struct hildev_softc *dev; switch ((stat >> HIL_SSHIFT) & HIL_SMASK) { case HIL_STATUS: if (c & HIL_ERROR) { sc->sc_cmddone = 1; if (c == HIL_RECONFIG) hilconfig(sc); break; } if (c & HIL_COMMAND) { if (c & HIL_POLLDATA) { /* End of data */ dev = sc->sc_devices[sc->sc_actdev]; if (dev != NULL && dev->sc_fn != NULL) dev->sc_fn(dev, sc->sc_pollbp - sc->sc_pollbuf, sc->sc_pollbuf); } else { /* End of command */ sc->sc_cmdending = 1; } sc->sc_actdev = 0; } else { if (c & HIL_POLLDATA) { /* Start of polled data */ sc->sc_actdev = (c & HIL_DEVMASK); sc->sc_pollbp = sc->sc_pollbuf; } else { /* Start of command */ if (sc->sc_cmddev == (c & HIL_DEVMASK)) { sc->sc_cmdbp = sc->sc_cmdbuf; sc->sc_actdev = 0; } } } break; case HIL_DATA: if (sc->sc_actdev != 0) /* Collecting poll data */ *sc->sc_pollbp++ = c; else { if (sc->sc_cmddev != 0) { /* Collecting cmd data */ if (sc->sc_cmdending) { sc->sc_cmddone = 1; sc->sc_cmdending = 0; } else *sc->sc_cmdbp++ = c; } } break; } } /* * Same as above, but in polled mode: return data as it gets seen, instead * of buffering it. */ int hil_process_poll(struct hil_softc *sc, u_int8_t stat, u_int8_t c) { u_int8_t db; switch ((stat >> HIL_SSHIFT) & HIL_SMASK) { case HIL_STATUS: if (c & HIL_ERROR) { sc->sc_cmddone = 1; if (c == HIL_RECONFIG) { /* * Remember that a configuration event * occured; it will be processed upon * leaving polled mode... */ sc->sc_cpending = 1; /* * However, the keyboard will come back as * cooked, and we rely on it being in raw * mode. So, put it back in raw mode right * now. */ db = 0; send_hil_cmd(sc, HIL_WRITEKBDSADR, &db, 1, NULL); } break; } if (c & HIL_COMMAND) { if (!(c & HIL_POLLDATA)) { /* End of command */ sc->sc_cmdending = 1; } sc->sc_actdev = 0; } else { if (c & HIL_POLLDATA) { /* Start of polled data */ sc->sc_actdev = (c & HIL_DEVMASK); sc->sc_pollbp = sc->sc_pollbuf; } else { /* Start of command - should not happen */ if (sc->sc_cmddev == (c & HIL_DEVMASK)) { sc->sc_cmdbp = sc->sc_cmdbuf; sc->sc_actdev = 0; } } } break; case HIL_DATA: if (sc->sc_actdev != 0) /* Collecting poll data */ return 1; else { if (sc->sc_cmddev != 0) { /* Discarding cmd data */ if (sc->sc_cmdending) { sc->sc_cmddone = 1; sc->sc_cmdending = 0; } } } break; } return 0; } /* * Called after the loop has reconfigured. Here we need to: * - determine how many devices are on the loop * (some may have been added or removed) * - make sure all keyboards are in raw mode * * Note that our device state is now potentially invalid as * devices may no longer be where they were. What we should * do here is either track where the devices went and move * state around accordingly... * * Note that it is necessary that we operate the loop with the keyboards * in raw mode: they won't cause the loop to generate an NMI if the * ``reset'' key combination is pressed, and we do not handle the hil * NMI interrupt... */ void hilconfig(struct hil_softc *sc) { struct hil_attach_args ha; u_int8_t db; int id, s; s = splhil(); /* * Determine how many devices are on the loop. */ db = 0; send_hil_cmd(sc, HIL_READLPSTAT, NULL, 0, &db); sc->sc_maxdev = db & LPS_DEVMASK; #ifdef HILDEBUG printf("%s: %d device(s)\n", sc->sc_dev.dv_xname, sc->sc_maxdev); #endif /* * Put all keyboards in raw mode now. */ db = 0; send_hil_cmd(sc, HIL_WRITEKBDSADR, &db, 1, NULL); /* * Now attach hil devices as they are found. */ for (id = 1; id <= sc->sc_maxdev; id++) { int len; const struct hildevice *hd; send_device_cmd(sc, id, HIL_IDENTIFY); len = sc->sc_cmdbp - sc->sc_cmdbuf; if (len == 0) { #ifdef HILDEBUG printf("%s: no device at code %d\n", sc->sc_dev.dv_xname, id); #endif continue; } /* * If we already have a device configured at this position, * then either it is still the same, or there has been some * removal or insertion in the chain that made it change * its position on the loop. * * Rather than trying to play smart and find where the * device has gone, detach it, it will get reattached at * its new address... */ if (sc->sc_devices[id] != NULL) { if (len == sc->sc_devices[id]->sc_infolen && bcmp(sc->sc_cmdbuf, sc->sc_devices[id]->sc_info, len) == 0) continue; config_detach((struct device *)sc->sc_devices[id], 0); } /* Identify and attach device */ for (hd = hildevs; hd->minid >= 0; hd++) if (sc->sc_cmdbuf[0] >= hd->minid && sc->sc_cmdbuf[0] <= hd->maxid) { ha.ha_console = sc->sc_console; ha.ha_code = id; ha.ha_type = hd->type; ha.ha_descr = hd->descr; ha.ha_infolen = len; bcopy(sc->sc_cmdbuf, ha.ha_info, len); sc->sc_devices[id] = (struct hildev_softc *) config_found_sm(&sc->sc_dev, &ha, hildevprint, hilsubmatch); } } /* * Detach remaining devices, if they have been removed */ for (id = sc->sc_maxdev + 1; id < NHILD; id++) { if (sc->sc_devices[id] != NULL) config_detach((struct device *)sc->sc_devices[id], DETACH_FORCE); sc->sc_devices[id] = NULL; } sc->sc_cmdbp = sc->sc_cmdbuf; splx(s); } /* * Low level routines which actually talk to the 8042 chip. */ /* * Send a command to the 8042 with zero or more bytes of data. * If rdata is non-null, wait for and return a byte of data. */ void send_hil_cmd(struct hil_softc *sc, u_int cmd, u_int8_t *data, u_int dlen, u_int8_t *rdata) { u_int8_t status; int s; s = splhil(); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, cmd); while (dlen--) { hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, *data++); DELAY(1); } if (rdata) { do { hildatawait(sc); status = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT); *rdata = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); DELAY(1); } while (((status >> HIL_SSHIFT) & HIL_SMASK) != HIL_68K); } splx(s); } /* * Send a command to a device on the loop. * Since only one command can be active on the loop at any time, * we must ensure that we are not interrupted during this process. * Hence we mask interrupts to prevent potential access from most * interrupt routines and turn off auto-polling to disable the * internally generated poll commands. * Needs to be called at splhil(). */ void send_device_cmd(struct hil_softc *sc, u_int device, u_int cmd) { u_int8_t status, c; polloff(sc); sc->sc_cmdbp = sc->sc_cmdbuf; sc->sc_cmddev = device; /* * Transfer the command and device info to the chip */ hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_STARTCMD); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, 8 + device); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, cmd); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, HIL_TIMEOUT); /* * Trigger the command and wait for completion */ hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_TRIGGER); sc->sc_cmddone = 0; do { hildatawait(sc); status = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT); c = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); DELAY(1); hil_process_int(sc, status, c); } while (sc->sc_cmddone == 0); sc->sc_cmddev = 0; pollon(sc); } void send_hildev_cmd(struct hildev_softc *dev, u_int cmd, u_int8_t *outbuf, u_int *outlen) { struct hil_softc *sc = (struct hil_softc *)dev->sc_dev.dv_parent; int s; s = splhil(); send_device_cmd(sc, dev->sc_code, cmd); /* * Return the command response in the buffer if necessary */ if (outbuf != NULL && outlen != NULL) { *outlen = min(*outlen, sc->sc_cmdbp - sc->sc_cmdbuf); bcopy(sc->sc_cmdbuf, outbuf, *outlen); } splx(s); } /* * Turn auto-polling off and on. */ void polloff(struct hil_softc *sc) { u_int8_t db; /* * Turn off auto repeat */ hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_SETARR); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, 0); /* * Turn off auto-polling */ hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_READLPCTRL); hildatawait(sc); db = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); db &= ~LPC_AUTOPOLL; hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_WRITELPCTRL); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, db); /* * Must wait until polling is really stopped */ do { hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_READBUSY); hildatawait(sc); db = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); } while (db & BSY_LOOPBUSY); sc->sc_cmddone = 0; sc->sc_cmddev = 0; } void pollon(struct hil_softc *sc) { u_int8_t db; /* * Turn on auto polling */ hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_READLPCTRL); hildatawait(sc); db = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); db |= LPC_AUTOPOLL; hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_WRITELPCTRL); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, db); /* * Turn off auto repeat - we emulate this through wscons */ hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_CMD, HIL_SETARR); hilwait(sc); bus_space_write_1(sc->sc_bst, sc->sc_bsh, HILP_DATA, 0); DELAY(1); } void hil_set_poll(struct hil_softc *sc, int on) { if (on) { pollon(sc); } else { if (sc->sc_cpending) { sc->sc_cpending = 0; hilconfig(sc); } send_hil_cmd(sc, HIL_INTON, NULL, 0, NULL); } } int hil_poll_data(struct hildev_softc *dev, u_int8_t *stat, u_int8_t *data) { struct hil_softc *sc = (struct hil_softc *)dev->sc_dev.dv_parent; u_int8_t s, c; s = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_STAT); if ((s & HIL_DATA_RDY) == 0) return -1; c = bus_space_read_1(sc->sc_bst, sc->sc_bsh, HILP_DATA); DELAY(1); if (hil_process_poll(sc, s, c)) { /* Discard any data not for us */ if (sc->sc_actdev == dev->sc_code) { *stat = s; *data = c; return 0; } } return -1; }