/* $OpenBSD: i2c_bitbang.c,v 1.1 2004/05/23 17:33:43 grange Exp $ */ /* $NetBSD: i2c_bitbang.c,v 1.1 2003/09/30 00:35:31 thorpej Exp $ */ /* * Copyright (c) 2003 Wasabi Systems, Inc. * All rights reserved. * * Written by Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Common module for bit-bang'ing an I2C bus. */ #include <sys/param.h> #include <dev/i2c/i2cvar.h> #include <dev/i2c/i2c_bitbang.h> #define BB_SET(x) ops->ibo_set_bits(v, (x)) #define BB_DIR(x) ops->ibo_set_dir(v, (x)) #define BB_READ ops->ibo_read_bits(v) #define SDA ops->ibo_bits[I2C_BIT_SDA] /* i2c signal */ #define SCL ops->ibo_bits[I2C_BIT_SCL] /* i2c signal */ #define OUTPUT ops->ibo_bits[I2C_BIT_OUTPUT] /* SDA is output */ #define INPUT ops->ibo_bits[I2C_BIT_INPUT] /* SDA is input */ /*ARGSUSED*/ int i2c_bitbang_send_start(void *v, int flags, i2c_bitbang_ops_t ops) { BB_DIR(OUTPUT); BB_SET(SDA | SCL); delay(5); /* bus free time (4.7 uS) */ BB_SET( SCL); delay(4); /* start hold time (4.0 uS) */ BB_SET( 0); delay(5); /* clock low time (4.7 uS) */ return (0); } /*ARGSUSED*/ int i2c_bitbang_send_stop(void *v, int flags, i2c_bitbang_ops_t ops) { BB_DIR(OUTPUT); BB_SET( SCL); delay(4); /* stop setup time (4.0 uS) */ BB_SET(SDA | SCL); return (0); } int i2c_bitbang_initiate_xfer(void *v, i2c_addr_t addr, int flags, i2c_bitbang_ops_t ops) { int i2caddr; /* XXX Only support 7-bit addressing for now. */ if ((addr & 0x78) == 0x78) return (EINVAL); i2caddr = (addr << 1) | ((flags & I2C_F_READ) ? 1 : 0); (void) i2c_bitbang_send_start(v, flags, ops); return (i2c_bitbang_write_byte(v, i2caddr, flags & ~I2C_F_STOP, ops)); } int i2c_bitbang_read_byte(void *v, uint8_t *valp, int flags, i2c_bitbang_ops_t ops) { int i; uint8_t val = 0; uint32_t bit; BB_DIR(INPUT); BB_SET(SDA ); for (i = 0; i < 8; i++) { val <<= 1; BB_SET(SDA | SCL); delay(4); /* clock high time (4.0 uS) */ if (BB_READ & SDA) val |= 1; BB_SET(SDA ); delay(5); /* clock low time (4.7 uS) */ } bit = (flags & I2C_F_LAST) ? SDA : 0; BB_DIR(OUTPUT); BB_SET(bit ); delay(1); /* data setup time (250 nS) */ BB_SET(bit | SCL); delay(4); /* clock high time (4.0 uS) */ BB_SET(bit ); delay(5); /* clock low time (4.7 uS) */ BB_DIR(INPUT); BB_SET(SDA ); delay(5); if ((flags & (I2C_F_STOP | I2C_F_LAST)) == (I2C_F_STOP | I2C_F_LAST)) (void) i2c_bitbang_send_stop(v, flags, ops); *valp = val; return (0); } int i2c_bitbang_write_byte(void *v, uint8_t val, int flags, i2c_bitbang_ops_t ops) { uint32_t bit; uint8_t mask; int error; BB_DIR(OUTPUT); for (mask = 0x80; mask != 0; mask >>= 1) { bit = (val & mask) ? SDA : 0; BB_SET(bit ); delay(1); /* data setup time (250 nS) */ BB_SET(bit | SCL); delay(4); /* clock high time (4.0 uS) */ BB_SET(bit ); delay(5); /* clock low time (4.7 uS) */ } BB_DIR(INPUT); BB_SET(SDA ); delay(5); BB_SET(SDA | SCL); delay(4); error = (BB_READ & SDA) ? EIO : 0; BB_SET(SDA ); delay(5); if (flags & I2C_F_STOP) (void) i2c_bitbang_send_stop(v, flags, ops); return (error); }