/* $OpenBSD: i2cvar.h,v 1.16 2016/04/23 09:40:28 kettenis Exp $ */ /* $NetBSD: i2cvar.h,v 1.1 2003/09/30 00:35:31 thorpej Exp $ */ /* * Copyright (c) 2003 Wasabi Systems, Inc. * All rights reserved. * * Written by Steve C. Woodford and Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_I2C_I2CVAR_H_ #define _DEV_I2C_I2CVAR_H_ #include struct device; /* Flags passed to i2c routines. */ #define I2C_F_WRITE 0x00 /* new transfer is a write */ #define I2C_F_READ 0x01 /* new transfer is a read */ #define I2C_F_LAST 0x02 /* last byte of read */ #define I2C_F_STOP 0x04 /* send stop after byte */ #define I2C_F_POLL 0x08 /* poll, don't sleep */ /* * This structure provides the interface between the i2c framework * and the underlying i2c controller. * * Note that this structure is designed specifically to allow us * to either use the autoconfiguration framework or not. This * allows a driver for a board with a private i2c bus use generic * i2c client drivers for chips that might be on that board. */ typedef struct i2c_controller { void *ic_cookie; /* controller private */ /* * These provide synchronization in the presence of * multiple users of the i2c bus. When a device * driver wishes to perform transfers on the i2c * bus, the driver should acquire the bus. When * the driver is finished, it should release the * bus. * * This is provided by the back-end since a single * controller may present e.g. i2c and smbus views * of the same set of i2c wires. */ int (*ic_acquire_bus)(void *, int); void (*ic_release_bus)(void *, int); /* * The preferred API for clients of the i2c interface * is the scripted API. This handles i2c controllers * that do not provide raw access to the i2c signals. */ int (*ic_exec)(void *, i2c_op_t, i2c_addr_t, const void *, size_t, void *, size_t, int); int (*ic_send_start)(void *, int); int (*ic_send_stop)(void *, int); int (*ic_initiate_xfer)(void *, i2c_addr_t, int); int (*ic_read_byte)(void *, uint8_t *, int); int (*ic_write_byte)(void *, uint8_t, int); void *(*ic_intr_establish)(void *, void *, int, int (*)(void *), void *, const char *); const char *(*ic_intr_string)(void *, void *); } *i2c_tag_t; /* Used to attach the i2c framework to the controller. */ struct i2cbus_attach_args { const char *iba_name; /* bus name ("iic") */ i2c_tag_t iba_tag; /* the controller */ void (*iba_bus_scan)(struct device *, struct i2cbus_attach_args *, void *); void *iba_bus_scan_arg; }; /* Used to attach devices on the i2c bus. */ struct i2c_attach_args { i2c_tag_t ia_tag; /* our controller */ i2c_addr_t ia_addr; /* address of device */ int ia_size; /* size (for EEPROMs) */ char *ia_name; /* chip name */ void *ia_cookie; /* pass extra info from bus to dev */ void *ia_intr; /* interrupt info */ }; /* * API presented to i2c controllers. */ int iicbus_print(void *, const char *); #ifdef _I2C_PRIVATE /* * Macros used internally by the i2c framework. */ #define iic_send_start(ic, flags) \ (*(ic)->ic_send_start)((ic)->ic_cookie, (flags)) #define iic_send_stop(ic, flags) \ (*(ic)->ic_send_stop)((ic)->ic_cookie, (flags)) #define iic_initiate_xfer(ic, addr, flags) \ (*(ic)->ic_initiate_xfer)((ic)->ic_cookie, (addr), (flags)) #define iic_read_byte(ic, bytep, flags) \ (*(ic)->ic_read_byte)((ic)->ic_cookie, (bytep), (flags)) #define iic_write_byte(ic, byte, flags) \ (*(ic)->ic_write_byte)((ic)->ic_cookie, (byte), (flags)) void iic_scan(struct device *, struct i2cbus_attach_args *); int iic_print(void *, const char *); #endif /* _I2C_PRIVATE */ /* * Simplified API for clients of the i2c framework. Definitions * in . */ #define iic_acquire_bus(ic, flags) \ (*(ic)->ic_acquire_bus)((ic)->ic_cookie, (flags)) #define iic_release_bus(ic, flags) \ (*(ic)->ic_release_bus)((ic)->ic_cookie, (flags)) int iic_exec(i2c_tag_t, i2c_op_t, i2c_addr_t, const void *, size_t, void *, size_t, int); int iic_smbus_write_byte(i2c_tag_t, i2c_addr_t, uint8_t, uint8_t, int); int iic_smbus_read_byte(i2c_tag_t, i2c_addr_t, uint8_t, uint8_t *, int); int iic_smbus_receive_byte(i2c_tag_t, i2c_addr_t, uint8_t *, int); #define iic_intr_establish(ic, ih, level, func, arg, name) \ (*(ic)->ic_intr_establish)((ic)->ic_cookie, (ih), (level), \ (func), (arg), (name)) #define iic_intr_string(ic, ih) \ (*(ic)->ic_intr_string)((ic)->ic_cookie, (ih)) void iic_ignore_addr(u_int8_t addr); #endif /* _DEV_I2C_I2CVAR_H_ */