/* $OpenBSD: iopsp.c,v 1.10 2007/09/16 01:04:18 krw Exp $ */ /* $NetBSD$ */ /*- * Copyright (c) 2000, 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Andrew Doran. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Raw SCSI device support for I2O. IOPs present SCSI devices individually; * we group them by controlling port. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct cfdriver iopsp_cd = { NULL, "iopsp", DV_DULL }; int iopsp_match(struct device *, void *, void *); void iopsp_attach(struct device *, struct device *, void *); struct cfattach iopsp_ca = { sizeof(struct iopsp_softc), iopsp_match, iopsp_attach }; int iopsp_scsi_cmd(struct scsi_xfer *); void iopspminphys(struct buf *bp); struct scsi_adapter iopsp_switch = { iopsp_scsi_cmd, iopspminphys, 0, 0, }; struct scsi_device iopsp_dev = { NULL, NULL, NULL, NULL }; void iopsp_adjqparam(struct device *, int); void iopsp_intr(struct device *, struct iop_msg *, void *); int iopsp_rescan(struct iopsp_softc *); int iopsp_reconfig(struct device *); /* * Match a supported device. */ int iopsp_match(struct device *parent, void *match, void *aux) { struct iop_attach_args *ia = aux; struct { struct i2o_param_op_results pr; struct i2o_param_read_results prr; struct i2o_param_hba_ctlr_info ci; } __attribute__ ((__packed__)) param; int rv; if (ia->ia_class != I2O_CLASS_BUS_ADAPTER_PORT) return (0); if ((rv = iop_param_op((struct iop_softc *)parent, ia->ia_tid, NULL, 0, I2O_PARAM_HBA_CTLR_INFO, ¶m, sizeof(param)))) { #ifdef I2ODEBUG printf("iopsp_match: iop_param_op failed, status = %d\n", rv); #endif return (0); } #ifdef I2ODEBUG printf("iopsp_match: bustype = %d\n", param.ci.bustype); #endif return (param.ci.bustype == I2O_HBA_BUS_SCSI || param.ci.bustype == I2O_HBA_BUS_FCA); } /* * Attach a supported device. */ void iopsp_attach(struct device *parent, struct device *self, void *aux) { struct iop_softc *iop = (struct iop_softc *)parent; struct iopsp_softc *sc = (struct iopsp_softc *)self; struct iop_attach_args *ia = (struct iop_attach_args *)aux; struct scsibus_attach_args saa; struct { struct i2o_param_op_results pr; struct i2o_param_read_results prr; union { struct i2o_param_hba_ctlr_info ci; struct i2o_param_hba_scsi_ctlr_info sci; struct i2o_param_hba_scsi_port_info spi; } p; } __attribute__ ((__packed__)) param; int fcal, rv; #ifdef I2OVERBOSE int size; #endif /* Register us as an initiator. */ sc->sc_ii.ii_dv = self; sc->sc_ii.ii_intr = iopsp_intr; sc->sc_ii.ii_flags = 0; sc->sc_ii.ii_tid = ia->ia_tid; sc->sc_ii.ii_reconfig = iopsp_reconfig; sc->sc_ii.ii_adjqparam = iopsp_adjqparam; iop_initiator_register(iop, &sc->sc_ii); rv = iop_param_op(iop, ia->ia_tid, NULL, 0, I2O_PARAM_HBA_CTLR_INFO, ¶m, sizeof(param)); if (rv != 0) { printf("%s: unable to get parameters (0x%04x; %d)\n", sc->sc_dv.dv_xname, I2O_PARAM_HBA_CTLR_INFO, rv); goto bad; } fcal = (param.p.ci.bustype == I2O_HBA_BUS_FCA); /* XXX */ /* * Say what the device is. If we can find out what the controling * device is, say what that is too. */ printf(": SCSI port"); iop_print_ident(iop, ia->ia_tid); printf("\n"); rv = iop_param_op(iop, ia->ia_tid, NULL, 0, I2O_PARAM_HBA_SCSI_CTLR_INFO, ¶m, sizeof(param)); if (rv != 0) { printf("%s: unable to get parameters (0x%04x; %d)\n", sc->sc_dv.dv_xname, I2O_PARAM_HBA_SCSI_CTLR_INFO, rv); goto bad; } #ifdef I2OVERBOSE printf("%s: %d-bit, max sync rate %dMHz, initiator ID %d\n", sc->sc_dv.dv_xname, param.p.sci.maxdatawidth, (u_int32_t)letoh64(param.p.sci.maxsyncrate) / 1000, letoh32(param.p.sci.initiatorid)); #endif sc->sc_link.adapter_softc = sc; sc->sc_link.adapter = &iopsp_switch; sc->sc_link.adapter_target = letoh32(param.p.sci.initiatorid); sc->sc_link.device = &iopsp_dev; sc->sc_link.openings = 1; sc->sc_link.adapter_buswidth = fcal? IOPSP_MAX_FCAL_TARGET : param.p.sci.maxdatawidth; sc->sc_link.luns = IOPSP_MAX_LUN; #ifdef I2OVERBOSE /* * Allocate the target map. Currently used for informational * purposes only. */ size = sc->sc_link.adapter_buswidth * sizeof(struct iopsp_target); sc->sc_targetmap = malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); #endif /* Build the two maps, and attach to scsi. */ if (iopsp_reconfig(self) != 0) { printf("%s: configure failed\n", sc->sc_dv.dv_xname); goto bad; } bzero(&saa, sizeof(saa)); saa.saa_sc_link = &sc->sc_link; config_found(&sc->sc_dv, &saa, scsiprint); return; bad: iop_initiator_unregister(iop, &sc->sc_ii); } /* * Scan the LCT to determine which devices we control, and enter them into * the maps. */ int iopsp_reconfig(struct device *dv) { struct iopsp_softc *sc = (struct iopsp_softc *)dv; struct iop_softc *iop = (struct iop_softc *)sc->sc_dv.dv_parent; struct i2o_lct_entry *le; struct { struct i2o_param_op_results pr; struct i2o_param_read_results prr; struct i2o_param_scsi_device_info sdi; } __attribute__ ((__packed__)) param; u_int tid, nent, i, targ, lun, size, s, rv, bptid; u_short *tidmap; #ifdef I2OVERBOSE struct iopsp_target *it; int syncrate; #endif /* Anything to do? */ if (iop->sc_chgind == sc->sc_chgind) return (0); /* * Allocate memory for the target/LUN -> TID map. Use zero to * denote absent targets (zero is the TID of the I2O executive, * and we never address that here). */ size = sc->sc_link.adapter_buswidth * IOPSP_MAX_LUN * sizeof(u_short); if (!(tidmap = malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO))) return (ENOMEM); #ifdef I2OVERBOSE for (i = 0; i < sc->sc_link.adapter_buswidth; i++) sc->sc_targetmap[i].it_flags &= ~IT_PRESENT; #endif /* * A quick hack to handle Intel's stacked bus port arrangement. */ bptid = sc->sc_ii.ii_tid; nent = iop->sc_nlctent; for (le = iop->sc_lct->entry; nent != 0; nent--, le++) if ((letoh16(le->classid) & 4095) == I2O_CLASS_BUS_ADAPTER_PORT && (letoh32(le->usertid) & 4095) == bptid) { bptid = letoh16(le->localtid) & 4095; break; } nent = iop->sc_nlctent; for (i = 0, le = iop->sc_lct->entry; i < nent; i++, le++) { if ((letoh16(le->classid) & I2O_CLASS_MASK) != I2O_CLASS_SCSI_PERIPHERAL || ((letoh32(le->usertid) >> 12) & 4095) != bptid) continue; tid = letoh16(le->localtid) & I2O_LCT_ENTRY_TID_MASK; rv = iop_param_op(iop, tid, NULL, 0, I2O_PARAM_SCSI_DEVICE_INFO, ¶m, sizeof(param)); if (rv != 0) { printf("%s: unable to get parameters (0x%04x; %d)\n", sc->sc_dv.dv_xname, I2O_PARAM_SCSI_DEVICE_INFO, rv); continue; } targ = letoh32(param.sdi.identifier); lun = param.sdi.luninfo[1]; #if defined(DIAGNOSTIC) || defined(I2ODEBUG) if (targ >= sc->sc_link.adapter_buswidth || lun >= sc->sc_link.adapter_buswidth) { printf("%s: target %d,%d (tid %d): bad target/LUN\n", sc->sc_dv.dv_xname, targ, lun, tid); continue; } #endif #ifdef I2OVERBOSE /* * If we've already described this target, and nothing has * changed, then don't describe it again. */ it = &sc->sc_targetmap[targ]; it->it_flags |= IT_PRESENT; syncrate = (int)((letoh64(param.sdi.negsyncrate) + 500) / 1000); if (it->it_width == param.sdi.negdatawidth && it->it_offset == param.sdi.negoffset && it->it_syncrate == syncrate) continue; it->it_width = param.sdi.negdatawidth; it->it_offset = param.sdi.negoffset; it->it_syncrate = syncrate; printf("%s: target %d (tid %d): %d-bit, ", sc->sc_dv.dv_xname, targ, tid, it->it_width); if (it->it_syncrate == 0) printf("asynchronous\n"); else printf("synchronous at %dMHz, offset 0x%x\n", it->it_syncrate, it->it_offset); #endif /* Ignore the device if it's in use by somebody else. */ if ((letoh32(le->usertid) & 4095) != I2O_TID_NONE) { #ifdef I2OVERBOSE if (sc->sc_tidmap == NULL || IOPSP_TIDMAP(sc->sc_tidmap, targ, lun) != IOPSP_TID_INUSE) printf("%s: target %d,%d (tid %d): in use by" " tid %d\n", sc->sc_dv.dv_xname, targ, lun, tid, letoh32(le->usertid) & 4095); #endif IOPSP_TIDMAP(tidmap, targ, lun) = IOPSP_TID_INUSE; } else IOPSP_TIDMAP(tidmap, targ, lun) = (u_short)tid; } #ifdef I2OVERBOSE for (i = 0; i < sc->sc_link.adapter_buswidth; i++) if ((sc->sc_targetmap[i].it_flags & IT_PRESENT) == 0) sc->sc_targetmap[i].it_width = 0; #endif /* Swap in the new map and return. */ s = splbio(); if (sc->sc_tidmap != NULL) free(sc->sc_tidmap, M_DEVBUF); sc->sc_tidmap = tidmap; splx(s); sc->sc_chgind = iop->sc_chgind; return (0); } /* * Re-scan the bus; to be called from a higher level (e.g. scsi). */ int iopsp_rescan(struct iopsp_softc *sc) { struct iop_softc *iop; struct iop_msg *im; struct i2o_hba_bus_scan mf; int rv; iop = (struct iop_softc *)sc->sc_dv.dv_parent; rv = lockmgr(&iop->sc_conflock, LK_EXCLUSIVE, NULL); if (rv != 0) { #ifdef I2ODEBUG printf("iopsp_rescan: unable to acquire lock\n"); #endif return (rv); } im = iop_msg_alloc(iop, &sc->sc_ii, IM_WAIT); mf.msgflags = I2O_MSGFLAGS(i2o_hba_bus_scan); mf.msgfunc = I2O_MSGFUNC(sc->sc_ii.ii_tid, I2O_HBA_BUS_SCAN); mf.msgictx = sc->sc_ii.ii_ictx; mf.msgtctx = im->im_tctx; rv = iop_msg_post(iop, im, &mf, 5*60*1000); iop_msg_free(iop, im); if (rv != 0) printf("%s: bus rescan failed (error %d)\n", sc->sc_dv.dv_xname, rv); if ((rv = iop_lct_get(iop)) == 0) rv = iopsp_reconfig(&sc->sc_dv); lockmgr(&iop->sc_conflock, LK_RELEASE, NULL); return (rv); } void iopspminphys(bp) struct buf *bp; { if (bp->b_bcount > IOP_MAX_XFER) bp->b_bcount = IOP_MAX_XFER; minphys(bp); } /* * Start a SCSI command. */ int iopsp_scsi_cmd(xs) struct scsi_xfer *xs; { struct scsi_link *link = xs->sc_link; struct iopsp_softc *sc = (struct iopsp_softc *)link->adapter_softc; struct iop_softc *iop = (struct iop_softc *)sc->sc_dv.dv_parent; struct iop_msg *im; struct i2o_scsi_scb_exec *mf; int error, tid, s; u_int32_t mb[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)]; tid = IOPSP_TIDMAP(sc->sc_tidmap, link->target, link->lun); if (tid == IOPSP_TID_ABSENT || tid == IOPSP_TID_INUSE) { xs->error = XS_SELTIMEOUT; scsi_done(xs); return (COMPLETE); } SC_DEBUG(xs->sc_link, SDEV_DB2, ("iopsp_scsi_cmd: run_xfer\n")); /* Need to reset the target? */ if ((xs->flags & XS_RESET) != 0) { if (iop_simple_cmd(iop, tid, I2O_SCSI_DEVICE_RESET, sc->sc_ii.ii_ictx, 1, 30*1000) != 0) { #ifdef I2ODEBUG printf("%s: reset failed\n", sc->sc_dv.dv_xname); #endif xs->error = XS_DRIVER_STUFFUP; } else xs->error = XS_NOERROR; scsi_done(xs); return (COMPLETE); } #if defined(I2ODEBUG) || defined(SCSIDEBUG) if (xs->cmdlen > sizeof(mf->cdb)) panic("%s: CDB too large", sc->sc_dv.dv_xname); #endif im = iop_msg_alloc(iop, &sc->sc_ii, IM_POLL_INTR | IM_NOSTATUS | ((xs->flags & SCSI_POLL) != 0 ? IM_POLL : 0)); im->im_dvcontext = xs; mf = (struct i2o_scsi_scb_exec *)mb; mf->msgflags = I2O_MSGFLAGS(i2o_scsi_scb_exec); mf->msgfunc = I2O_MSGFUNC(tid, I2O_SCSI_SCB_EXEC); mf->msgictx = sc->sc_ii.ii_ictx; mf->msgtctx = im->im_tctx; mf->flags = xs->cmdlen | I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE; mf->datalen = xs->datalen; memcpy(mf->cdb, xs->cmd, xs->cmdlen); #if 0 switch (xs->xs_tag_type) { case MSG_ORDERED_Q_TAG: mf->flags |= I2O_SCB_FLAG_ORDERED_QUEUE_TAG; break; case MSG_SIMPLE_Q_TAG: mf->flags |= I2O_SCB_FLAG_SIMPLE_QUEUE_TAG; break; case MSG_HEAD_OF_Q_TAG: mf->flags |= I2O_SCB_FLAG_HEAD_QUEUE_TAG; break; default: break; } #endif if (xs->datalen != 0) { error = iop_msg_map_bio(iop, im, mb, xs->data, xs->datalen, (xs->flags & SCSI_DATA_OUT) == 0); if (error) { xs->error = XS_DRIVER_STUFFUP; iop_msg_free(iop, im); scsi_done(xs); return (COMPLETE); } if ((xs->flags & SCSI_DATA_IN) == 0) mf->flags |= I2O_SCB_FLAG_XFER_TO_DEVICE; else mf->flags |= I2O_SCB_FLAG_XFER_FROM_DEVICE; } s = splbio(); sc->sc_curqd++; splx(s); if (iop_msg_post(iop, im, mb, xs->timeout)) { s = splbio(); sc->sc_curqd--; splx(s); if (xs->datalen != 0) iop_msg_unmap(iop, im); iop_msg_free(iop, im); xs->error = XS_DRIVER_STUFFUP; scsi_done(xs); return (COMPLETE); } return (xs->flags & SCSI_POLL? COMPLETE : SUCCESSFULLY_QUEUED); } #ifdef notyet /* * Abort the specified I2O_SCSI_SCB_EXEC message and its associated SCB. */ int iopsp_scsi_abort(struct iopsp_softc *sc, int atid, struct iop_msg *aim) { struct iop_msg *im; struct i2o_scsi_scb_abort mf; struct iop_softc *iop; int rv, s; iop = (struct iop_softc *)sc->sc_dv.dv_parent; im = iop_msg_alloc(iop, &sc->sc_ii, IM_POLL); mf.msgflags = I2O_MSGFLAGS(i2o_scsi_scb_abort); mf.msgfunc = I2O_MSGFUNC(atid, I2O_SCSI_SCB_ABORT); mf.msgictx = sc->sc_ii.ii_ictx; mf.msgtctx = im->im_tctx; mf.tctxabort = aim->im_tctx; s = splbio(); rv = iop_msg_post(iop, im, &mf, 30000); splx(s); iop_msg_free(iop, im); return (rv); } #endif /* * We have a message which has been processed and replied to by the IOP - * deal with it. */ void iopsp_intr(struct device *dv, struct iop_msg *im, void *reply) { struct scsi_xfer *xs; struct iopsp_softc *sc; struct i2o_scsi_reply *rb; struct iop_softc *iop; u_int sl; sc = (struct iopsp_softc *)dv; xs = (struct scsi_xfer *)im->im_dvcontext; iop = (struct iop_softc *)dv->dv_parent; rb = reply; SC_DEBUG(xs->sc_link, SDEV_DB2, ("iopsp_intr\n")); if ((rb->msgflags & I2O_MSGFLAGS_FAIL) != 0) { xs->error = XS_DRIVER_STUFFUP; xs->resid = xs->datalen; } else { if (rb->hbastatus != I2O_SCSI_DSC_SUCCESS) { switch (rb->hbastatus) { case I2O_SCSI_DSC_ADAPTER_BUSY: case I2O_SCSI_DSC_SCSI_BUS_RESET: case I2O_SCSI_DSC_BUS_BUSY: xs->error = XS_BUSY; break; case I2O_SCSI_DSC_SELECTION_TIMEOUT: xs->error = XS_SELTIMEOUT; break; case I2O_SCSI_DSC_COMMAND_TIMEOUT: case I2O_SCSI_DSC_DEVICE_NOT_PRESENT: case I2O_SCSI_DSC_LUN_INVALID: case I2O_SCSI_DSC_SCSI_TID_INVALID: xs->error = XS_TIMEOUT; break; default: xs->error = XS_DRIVER_STUFFUP; break; } printf("%s: HBA status 0x%02x\n", sc->sc_dv.dv_xname, rb->hbastatus); } else if (rb->scsistatus != SCSI_OK) { switch (rb->scsistatus) { case SCSI_CHECK: xs->error = XS_SENSE; sl = letoh32(rb->senselen); if (sl > sizeof(xs->sense)) sl = sizeof(xs->sense); bcopy(rb->sense, &xs->sense, sl); break; case SCSI_QUEUE_FULL: case SCSI_BUSY: xs->error = XS_BUSY; break; default: xs->error = XS_DRIVER_STUFFUP; break; } } else xs->error = XS_NOERROR; xs->resid = xs->datalen - letoh32(rb->datalen); xs->status = rb->scsistatus; } /* Free the message wrapper and pass the news to scsi. */ if (xs->datalen != 0) iop_msg_unmap(iop, im); iop_msg_free(iop, im); if (--sc->sc_curqd == sc->sc_link.openings) wakeup(&sc->sc_curqd); scsi_done(xs); } /* * The number of openings available to us has changed, so inform scsi. */ void iopsp_adjqparam(struct device *dv, int mpi) { struct iopsp_softc *sc = (struct iopsp_softc *)dv; int s; s = splbio(); sc->sc_link.openings = mpi; if (mpi < sc->sc_curqd) tsleep(&sc->sc_curqd, PWAIT, "iopspdrn", 0); splx(s); }