/*	$OpenBSD: aacreg.h,v 1.4 2002/09/08 01:09:07 deraadt Exp $	*/

/*-
 * Copyright (c) 2000 Michael Smith
 * Copyright (c) 2000 Scott Long
 * Copyright (c) 2000 BSDi
 * Copyright (c) 2000 Niklas Hallqvist
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	$FreeBSD: /c/ncvs/src/sys/dev/aac/aacreg.h,v 1.1 2000/09/13 03:20:34 msmith Exp $
 */

/*
 * Data structures defining the interface between the driver and the Adaptec
 * 'FSA' adapters.  Note that many field names and comments here are taken
 * verbatim from the Adaptec driver source in order to make comparing the
 * two slightly easier.
 */

/*
 * Misc. magic numbers.
 */
#define AAC_MAX_CONTAINERS	64
#define AAC_BLOCK_SIZE		512

/*
 * Communications interface.
 *
 * Where datastructure layouts are closely parallel to the Adaptec sample code,
 * retain their naming conventions (for now) to aid in cross-referencing.
 */

/*
 * We establish 4 command queues and matching response queues.  Queues must
 * be 16-byte aligned, and are sized as follows:
 */
#define AAC_HOST_NORM_CMD_ENTRIES 8	/* cmd adapter->host, normal pri */
#define AAC_HOST_HIGH_CMD_ENTRIES 4	/* cmd adapter->host, high pri */
#define AAC_ADAP_NORM_CMD_ENTRIES 512	/* cmd host->adapter, normal pri */
#define AAC_ADAP_HIGH_CMD_ENTRIES 4	/* cmd host->adapter, high pri */
#define AAC_HOST_NORM_RESP_ENTRIES 512	/* resp, adapter->host, normal pri */
#define AAC_HOST_HIGH_RESP_ENTRIES 4	/* resp, adapter->host, high pri */
#define AAC_ADAP_NORM_RESP_ENTRIES 8	/* resp, host->adapter, normal pri */
#define AAC_ADAP_HIGH_RESP_ENTRIES 4	/* resp, host->adapter, high pri */

#define AAC_TOTALQ_LENGTH \
    (AAC_HOST_HIGH_CMD_ENTRIES + AAC_HOST_NORM_CMD_ENTRIES + \
    AAC_ADAP_HIGH_CMD_ENTRIES +	AAC_ADAP_NORM_CMD_ENTRIES + \
    AAC_HOST_HIGH_RESP_ENTRIES + AAC_HOST_NORM_RESP_ENTRIES + \
    AAC_ADAP_HIGH_RESP_ENTRIES + AAC_ADAP_NORM_RESP_ENTRIES)

#define AAC_QUEUE_COUNT		8
#define AAC_QUEUE_ALIGN		16

struct aac_queue_entry {
	u_int32_t aq_fib_size;		/* FIB size in bytes */
	u_int32_t aq_fib_addr;		/* receiver-space address of the FIB */
} __attribute__ ((__packed__));

#define AAC_PRODUCER_INDEX	0
#define AAC_CONSUMER_INDEX	1

/*
 * Table of queue indices and queues used to communicate with the
 * controller.  This structure must be aligned to AAC_QUEUE_ALIGN
 */
struct aac_queue_table {
	/* queue consumer/producer indexes (layout mandated by adapter) */
	u_int32_t qt_qindex[AAC_QUEUE_COUNT][2];

	/* queue entry structures (layout mandated by adapter) */
	struct aac_queue_entry qt_HostNormCmdQueue[AAC_HOST_NORM_CMD_ENTRIES];
	struct aac_queue_entry qt_HostHighCmdQueue[AAC_HOST_HIGH_CMD_ENTRIES];
	struct aac_queue_entry qt_AdapNormCmdQueue[AAC_ADAP_NORM_CMD_ENTRIES];
	struct aac_queue_entry qt_AdapHighCmdQueue[AAC_ADAP_HIGH_CMD_ENTRIES];
	struct aac_queue_entry
	    qt_HostNormRespQueue[AAC_HOST_NORM_RESP_ENTRIES];
	struct aac_queue_entry
	    qt_HostHighRespQueue[AAC_HOST_HIGH_RESP_ENTRIES];
	struct aac_queue_entry
	    qt_AdapNormRespQueue[AAC_ADAP_NORM_RESP_ENTRIES];
	struct aac_queue_entry
	    qt_AdapHighRespQueue[AAC_ADAP_HIGH_RESP_ENTRIES];
} __attribute__ ((__packed__));

/*
 * Adapter Init Structure: this is passed to the adapter with the 
 * AAC_MONKER_INITSTRUCT command to point it at our control structures.
 */
struct aac_adapter_init {
	u_int32_t InitStructRevision;
#define AAC_INIT_STRUCT_REVISION	3
	u_int32_t MiniPortRevision;
	u_int32_t FilesystemRevision;
	u_int32_t CommHeaderAddress;
	u_int32_t FastIoCommAreaAddress;
	u_int32_t AdapterFibsPhysicalAddress;
	void	*AdapterFibsVirtualAddress;
	u_int32_t AdapterFibsSize;
	u_int32_t AdapterFibAlign;
	u_int32_t PrintfBufferAddress;
	u_int32_t PrintfBufferSize;
	u_int32_t HostPhysMemPages;
	u_int32_t HostElapsedSeconds;
} __attribute__((__packed__));

/*
 * Shared data types
 */

/*
 * Container types
 */
typedef enum {
	CT_NONE = 0,
	CT_VOLUME,
	CT_MIRROR,
	CT_STRIPE,
	CT_RAID5,
	CT_SSRW,
	CT_SSRO,
	CT_MORPH,
	CT_PASSTHRU,
	CT_RAID4,
	CT_RAID10,                  /* stripe of mirror */
	CT_RAID00,                  /* stripe of stripe */
	CT_VOLUME_OF_MIRRORS,       /* volume of mirror */
	CT_PSEUDO_RAID3	            /* really raid4 */
} AAC_FSAVolType;

/*
 * Host-addressable object types
 */
typedef enum {
	FT_REG = 1,     /* regular file */
	FT_DIR,         /* directory */
	FT_BLK,         /* "block" device - reserved */
	FT_CHR,         /* "character special" device - reserved */
	FT_LNK,         /* symbolic link */
	FT_SOCK,        /* socket */
	FT_FIFO,        /* fifo */
	FT_FILESYS,     /* ADAPTEC's "FSA"(tm) filesystem */
	FT_DRIVE,       /* phys disk - addressable in scsi by bus/target/lun */
	FT_SLICE,       /* virtual disk - raw volume - slice */
	FT_PARTITION,   /* FSA part, inside slice, container building block */
	FT_VOLUME,      /* Container - Volume Set */
	FT_STRIPE,      /* Container - Stripe Set */
	FT_MIRROR,      /* Container - Mirror Set */
	FT_RAID5,       /* Container - Raid 5 Set */
	FT_DATABASE     /* Storage object with "foreign" content manager */
} AAC_FType;

/*
 * Host-side scatter/gather list for 32-bit commands.
 */
struct aac_sg_entry {
	u_int32_t SgAddress;
	u_int32_t SgByteCount;
} __attribute__ ((__packed__));

struct aac_sg_table {
	u_int32_t SgCount;
	struct aac_sg_entry SgEntry[0];
} __attribute__ ((__packed__));

/*
 * Host-side scatter/gather list for 64-bit commands.
 */
struct aac_sg_table64 {
	u_int8_t SgCount;
	u_int8_t SgSectorsPerPage;
	u_int16_t SgByteOffset;
	u_int64_t SgEntry[0];
} __attribute__ ((__packed__));

/*
 * Container creation data
 */
struct aac_container_creation {
	u_int8_t ViaBuildNumber;
	u_int8_t MicroSecond;
	u_int8_t Via;			/* 1 = FSU, 2 = API, etc. */
	u_int8_t YearsSince1900;
	u_int32_t Month:4;		/* 1-12 */
	u_int32_t Day:6;		/* 1-32 */
	u_int32_t Hour:6;		/* 0-23 */
	u_int32_t Minute:6;		/* 0-59 */
	u_int32_t Second:6;		/* 0-59 */
	u_int64_t ViaAdapterSerialNumber;
} __attribute__ ((__packed__));

struct FsaRevision {
	union {
        	struct {
			u_int8_t dash;
			u_int8_t type;
			u_int8_t minor;
			u_int8_t major;
	        } comp;
	        u_int32_t ul;
	} external;
	u_int32_t buildNumber;
} __attribute__((__packed__));

/*
 * Adapter Information
 */

typedef enum {
	CPU_NTSIM = 1,
	CPU_I960,
	CPU_ARM,
	CPU_SPARC,
	CPU_POWERPC,
	CPU_ALPHA,
	CPU_P7,
	CPU_I960_RX,
	CPU__last
} AAC_CpuType;  

typedef enum {
	CPUI960_JX = 1,
	CPUI960_CX,
	CPUI960_HX,
	CPUI960_RX,
	CPUARM_SA110,
	CPUARM_xxx,
	CPUPPC_603e,
	CPUPPC_xxx,
	CPUSUBTYPE__last
} AAC_CpuSubType;

typedef enum {
	PLAT_NTSIM = 1,
	PLAT_V3ADU,
	PLAT_CYCLONE,
	PLAT_CYCLONE_HD,
	PLAT_BATBOARD,
	PLAT_BATBOARD_HD,
	PLAT_YOLO,
	PLAT_COBRA,
	PLAT_ANAHEIM,
	PLAT_JALAPENO,
	PLAT_QUEENS,
	PLAT_JALAPENO_DELL,
	PLAT_POBLANO,
	PLAT_POBLANO_OPAL,
	PLAT_POBLANO_SL0,
	PLAT_POBLANO_SL1,
	PLAT_POBLANO_SL2,
	PLAT_POBLANO_XXX,
	PLAT_JALAPENO_P2,
	PLAT_HABANERO,
	PLAT__last
} AAC_Platform;

typedef enum {
	OEM_FLAVOR_ADAPTEC = 1,
	OEM_FLAVOR_DELL,
	OEM_FLAVOR_HP,
	OEM_FLAVOR_IBM,
	OEM_FLAVOR_CPQ,
	OEM_FLAVOR_BRAND_X,
	OEM_FLAVOR_BRAND_Y,
	OEM_FLAVOR_BRAND_Z,
	OEM_FLAVOR__last
} AAC_OemFlavor;

/*
 * XXX the aac-2622 with no battery present reports PLATFORM_BAT_OPT_PRESENT
 */
typedef enum { 
	PLATFORM_BAT_REQ_PRESENT = 1,	/* BATTERY REQUIRED AND PRESENT */
	PLATFORM_BAT_REQ_NOTPRESENT,	/* BATTERY REQUIRED AND NOT PRESENT */
	PLATFORM_BAT_OPT_PRESENT,	/* BATTERY OPTIONAL AND PRESENT */
	PLATFORM_BAT_OPT_NOTPRESENT,	/* BATTERY OPTIONAL AND NOT PRESENT */
	PLATFORM_BAT_NOT_SUPPORTED	/* BATTERY NOT SUPPORTED */
} AAC_BatteryPlatform;

/* 
 * Structure used to respond to a RequestAdapterInfo fib.
 */
struct aac_adapter_info {
	AAC_Platform PlatformBase;	/* adapter type */
	AAC_CpuType CpuArchitecture;	/* adapter CPU type */
	AAC_CpuSubType CpuVariant;	/* adapter CPU subtype */
	u_int32_t ClockSpeed;		/* adapter CPU clockspeed */
	u_int32_t ExecutionMem;		/* adapter Execution Memory size */
	u_int32_t BufferMem;		/* adapter Data Memory */
	u_int32_t TotalMem;		/* adapter Total Memory */
	struct FsaRevision KernelRevision; /* adapter Kernel SW Revision */
	struct FsaRevision MonitorRevision; /* adapter Monitor/Diag SW Rev */
	struct FsaRevision HardwareRevision; /* TDB */
	struct FsaRevision BIOSRevision; /* adapter BIOS Revision */
	u_int32_t ClusteringEnabled;
	u_int32_t ClusterChannelMask;
	u_int64_t SerialNumber;
	AAC_BatteryPlatform batteryPlatform;
	u_int32_t SupportedOptions;	/* supported features of this ctrlr */
	AAC_OemFlavor OemVariant;
} __attribute__((__packed__));

/*
 * Monitor/Kernel interface.
 */

/*
 * Synchronous commands to the monitor/kernel.
 */
#define AAC_MONKER_INITSTRUCT	0x05
#define AAC_MONKER_SYNCFIB	0x0c

/*
 * Command status values
 */
typedef enum {
    ST_OK = 0,
    ST_PERM = 1,
    ST_NOENT = 2,
    ST_IO = 5,
    ST_NXIO = 6,
    ST_E2BIG = 7,
    ST_ACCES = 13,
    ST_EXIST = 17,
    ST_XDEV = 18,
    ST_NODEV = 19,
    ST_NOTDIR = 20,
    ST_ISDIR = 21,
    ST_INVAL = 22,
    ST_FBIG = 27,
    ST_NOSPC = 28,
    ST_ROFS = 30,
    ST_MLINK = 31,
    ST_WOULDBLOCK = 35,
    ST_NAMETOOLONG = 63,
    ST_NOTEMPTY = 66,
    ST_DQUOT = 69,
    ST_STALE = 70,
    ST_REMOTE = 71,
    ST_BADHANDLE = 10001,
    ST_NOT_SYNC = 10002,
    ST_BAD_COOKIE = 10003,
    ST_NOTSUPP = 10004,
    ST_TOOSMALL = 10005,
    ST_SERVERFAULT = 10006,
    ST_BADTYPE = 10007,
    ST_JUKEBOX = 10008,
    ST_NOTMOUNTED = 10009,
    ST_MAINTMODE = 10010,
    ST_STALEACL = 10011
} AAC_FSAStatus;

/*
 * Volume manager commands
 */
typedef enum _VM_COMMANDS {
    VM_Null = 0,
    VM_NameServe,
    VM_ContainerConfig,
    VM_Ioctl,
    VM_FilesystemIoctl,
    VM_CloseAll,
    VM_CtBlockRead,
    VM_CtBlockWrite,
    VM_SliceBlockRead,	 /* raw access to configured "storage objects" */
    VM_SliceBlockWrite,
    VM_DriveBlockRead,	 /* raw access to physical devices */
    VM_DriveBlockWrite,
    VM_EnclosureMgt,	 /* enclosure management */
    VM_Unused,		 /* used to be diskset management */
    VM_CtBlockVerify,
    VM_CtPerf,		 /* performance test */
    VM_CtBlockRead64,
    VM_CtBlockWrite64,
    VM_CtBlockVerify64,
} AAC_VMCommand;

/*
 * "Mountable object"
 */
struct aac_mntobj {
	u_int32_t ObjectId;
	char	FileSystemName[16];
	struct aac_container_creation CreateInfo;
	u_int32_t Capacity;
	AAC_FSAVolType VolType;
	AAC_FType ObjType;
	u_int32_t ContentState;
#define AAC_FSCS_READONLY 0x0002 /* XXX need more information than this */
	union {
		u_int32_t pad[8];
	} ObjExtension;
	u_int32_t AlterEgoId;
} __attribute__ ((__packed__));

struct aac_mntinfo {
	AAC_VMCommand Command;
	AAC_FType MntType;
	u_int32_t MntCount;
} __attribute__ ((__packed__));

struct aac_mntinforesponse {
	AAC_FSAStatus Status;
	AAC_FType MntType;
	u_int32_t MntRespCount;
	struct aac_mntobj MntTable[1];
} __attribute__ ((__packed__));

/*
 * Write 'stability' options.
 */
typedef enum {
	CSTABLE = 1,
	CUNSTABLE
} AAC_CacheLevel;

/*
 * Commit level response for a write request.
 */
typedef enum {
	CMFILE_SYNC_NVRAM = 1,
	CMDATA_SYNC_NVRAM,
	CMFILE_SYNC,
	CMDATA_SYNC,
	CMUNSTABLE
} AAC_CommitLevel;

/*
 * Block read/write operations.
 * These structures are packed into the 'data' area in the FIB.
 */

struct aac_blockread {
	AAC_VMCommand Command;		/* not FSACommand! */
	u_int32_t ContainerId;
	u_int32_t BlockNumber;
	u_int32_t ByteCount;
	struct aac_sg_table SgMap;	/* variable size */
} __attribute__ ((__packed__));

struct aac_blockread_response {
	AAC_FSAStatus Status;
	u_int32_t ByteCount;
} __attribute__ ((__packed__));

struct aac_blockwrite {
	AAC_VMCommand	Command;	/* not FSACommand! */
	u_int32_t ContainerId;
	u_int32_t BlockNumber;
	u_int32_t ByteCount;
	AAC_CacheLevel Stable;
	struct aac_sg_table SgMap;	/* variable size */
} __attribute__ ((__packed__));

struct aac_blockwrite_response {
	AAC_FSAStatus Status;
	u_int32_t ByteCount;
	AAC_CommitLevel Committed;
} __attribute__ ((__packed__));

/*
 * Register definitions for the Adaptec AAC-364 'Jalapeno I/II' adapters, based
 * on the SA110 'StrongArm'.
 */

#define AAC_REGSIZE		0x100

/* doorbell 0 (adapter->host) */
#define AAC_SA_DOORBELL0_CLEAR	0x98
#define AAC_SA_DOORBELL0_SET	0x9c
#define AAC_SA_DOORBELL0	0x9c
#define AAC_SA_MASK0_CLEAR	0xa0
#define AAC_SA_MASK0_SET	0xa4

/* doorbell 1 (host->adapter) */
#define AAC_SA_DOORBELL1_CLEAR	0x9a
#define AAC_SA_DOORBELL1_SET	0x9e
#define AAC_SA_MASK1_CLEAR	0xa2
#define AAC_SA_MASK1_SET	0xa6

/* mailbox (20 bytes) */
#define AAC_SA_MAILBOX		0xa8
#define AAC_SA_FWSTATUS		0xc4

/*
 * Register definitions for the Adaptec 'Pablano' adapters, based on the
 * i960Rx, and other related adapters.
 */

#define AAC_RX_IDBR		0x20	/* inbound doorbell */
#define AAC_RX_IISR		0x24	/* inbound interrupt status */
#define AAC_RX_IIMR		0x28	/* inbound interrupt mask */
#define AAC_RX_ODBR		0x2c	/* outbound doorbell */
#define AAC_RX_OISR		0x30	/* outbound interrupt status */
#define AAC_RX_OIMR		0x34	/* outbound interrupt mask */

#define AAC_RX_MAILBOX		0x50	/* mailbox (20 bytes) */
#define AAC_RX_FWSTATUS		0x6c

/*
 * Common bit definitions for the doorbell registers.
 */

/*
 * Status bits in the doorbell registers.
 */
#define AAC_DB_SYNC_COMMAND	(1<<0)	/* send/completed synchronous FIB */
#define AAC_DB_COMMAND_READY	(1<<1)	/* posted one or more commands */
#define AAC_DB_RESPONSE_READY	(1<<2)	/* one or more commands complete */
#define AAC_DB_COMMAND_NOT_FULL	(1<<3)	/* command queue not full */
#define AAC_DB_RESPONSE_NOT_FULL (1<<4)	/* response queue not full */

/*
 * The adapter can request the host print a message by setting the
 * DB_PRINTF flag in DOORBELL0.  The driver responds by collecting the
 * message from the printf buffer, clearing the DB_PRINTF flag in 
 * DOORBELL0 and setting it in DOORBELL1.
 * (ODBR and IDBR respectively for the i960Rx adapters)
 */
#define AAC_DB_PRINTF		(1<<5)

/*
 * Mask containing the interrupt bits we care about.  We don't anticipate
 * (or want) interrupts not in this mask.
 */
#define AAC_DB_INTERRUPTS \
	(AAC_DB_COMMAND_READY | AAC_DB_RESPONSE_READY | AAC_DB_PRINTF)

/*
 * Queue names
 *
 * Note that we base these at 0 in order to use them as array indices.  Adaptec
 * used base 1 for some unknown reason, and sorted them in a different order.
 */
#define AAC_HOST_NORM_CMD_QUEUE		0
#define AAC_HOST_HIGH_CMD_QUEUE		1
#define AAC_ADAP_NORM_CMD_QUEUE		2
#define AAC_ADAP_HIGH_CMD_QUEUE		3
#define AAC_HOST_NORM_RESP_QUEUE	4
#define AAC_HOST_HIGH_RESP_QUEUE	5
#define AAC_ADAP_NORM_RESP_QUEUE	6
#define AAC_ADAP_HIGH_RESP_QUEUE	7

/*
 * List structure used to chain FIBs (used by the adapter - we hang FIBs off
 * our private command structure and don't touch these)
 */
struct aac_fib_list_entry {
	struct fib_list_entry *Flink;
	struct fib_list_entry *Blink;
} __attribute__((__packed__));

/*
 * FIB (FSA Interface Block?); this is the datastructure passed between the
 * host and adapter.
 */
struct aac_fib_header {
	u_int32_t XferState;
	u_int16_t Command;
	u_int8_t StructType;
	u_int8_t Flags;
	u_int16_t Size;
	u_int16_t SenderSize;
	u_int32_t SenderFibAddress;
	u_int32_t ReceiverFibAddress;
	u_int32_t SenderData;
	union {
		struct {
			u_int32_t ReceiverTimeStart;
			u_int32_t ReceiverTimeDone;
		} _s;
		struct aac_fib_list_entry FibLinks;
	} _u;
} __attribute__((__packed__));

#define AAC_FIB_DATASIZE (512 - sizeof(struct aac_fib_header))

struct aac_fib {
	struct aac_fib_header Header;
	u_int8_t data[AAC_FIB_DATASIZE];
} __attribute__((__packed__));

/*
 * FIB commands
 */
typedef enum {
    TestCommandResponse =		1,
    TestAdapterCommand =		2,

    /* lowlevel and comm commands */
    LastTestCommand =			100,
    ReinitHostNormCommandQueue =	101,
    ReinitHostHighCommandQueue =	102,
    ReinitHostHighRespQueue =		103,
    ReinitHostNormRespQueue =		104,
    ReinitAdapNormCommandQueue =	105,
    ReinitAdapHighCommandQueue =	107,
    ReinitAdapHighRespQueue =		108,
    ReinitAdapNormRespQueue =		109,
    InterfaceShutdown =			110,
    DmaCommandFib =			120,
    StartProfile =			121,
    TermProfile =			122,
    SpeedTest =				123,
    TakeABreakPt =			124,
    RequestPerfData =			125,
    SetInterruptDefTimer=		126,
    SetInterruptDefCount=		127,
    GetInterruptDefStatus=		128,
    LastCommCommand =			129,

    /* filesystem commands */
    NuFileSystem =			300,
    UFS =				301,
    HostFileSystem =			302,
    LastFileSystemCommand =		303,

    /* Container Commands */
    ContainerCommand =			500,
    ContainerCommand64 =		501,

    /* Cluster Commands */
    ClusterCommand =			550,

    /* Scsi Port commands (scsi passthrough) */
    ScsiPortCommand =			600,

    /* misc house keeping and generic adapter initiated commands */
    AifRequest =			700,
    CheckRevision =			701,
    FsaHostShutdown =			702,
    RequestAdapterInfo =		703,
    IsAdapterPaused =			704,
    SendHostTime =			705,
    LastMiscCommand =			706
} AAC_FibCommands;

/*
 * FIB types
 */
#define AAC_FIBTYPE_TFIB	1
#define AAC_FIBTYPE_TQE		2
#define AAC_FIBTYPE_TCTPERF	3

/*
 * FIB transfer state
 */
#define AAC_FIBSTATE_HOSTOWNED		(1<<0)	/* owned by the host */
#define AAC_FIBSTATE_ADAPTEROWNED	(1<<1)	/* owned by the adapter */
#define AAC_FIBSTATE_INITIALISED	(1<<2)	/* initialised */
#define AAC_FIBSTATE_EMPTY		(1<<3)	/* empty */
#define AAC_FIBSTATE_FROMPOOL		(1<<4)	/* allocated from pool */
#define AAC_FIBSTATE_FROMHOST		(1<<5)	/* sent from the host */
#define AAC_FIBSTATE_FROMADAP		(1<<6)	/* sent from the adapter */
#define AAC_FIBSTATE_REXPECTED		(1<<7)	/* response is expected */
#define AAC_FIBSTATE_RNOTEXPECTED	(1<<8)	/* response is not expected */
#define AAC_FIBSTATE_DONEADAP		(1<<9)	/* processed by the adapter */
#define AAC_FIBSTATE_DONEHOST		(1<<10)	/* processed by the host */
#define AAC_FIBSTATE_HIGH		(1<<11)	/* high priority */
#define AAC_FIBSTATE_NORM		(1<<12)	/* normal priority */
#define AAC_FIBSTATE_ASYNC		(1<<13)
#define AAC_FIBSTATE_ASYNCIO		(1<<13)	/* to be removed */
#define AAC_FIBSTATE_PAGEFILEIO		(1<<14)	/* to be removed */
#define AAC_FIBSTATE_SHUTDOWN		(1<<15)
#define AAC_FIBSTATE_LAZYWRITE		(1<<16)	/* to be removed */
#define AAC_FIBSTATE_ADAPMICROFIB	(1<<17)
#define AAC_FIBSTATE_BIOSFIB		(1<<18)
#define AAC_FIBSTATE_FAST_RESPONSE	(1<<19)	/* fast response capable */
#define AAC_FIBSTATE_APIFIB		(1<<20)

/*
 * FIB error values
 */
#define AAC_ERROR_NORMAL			0x00
#define AAC_ERROR_PENDING			0x01
#define AAC_ERROR_FATAL				0x02
#define AAC_ERROR_INVALID_QUEUE			0x03
#define AAC_ERROR_NOENTRIES			0x04
#define AAC_ERROR_SENDFAILED			0x05
#define AAC_ERROR_INVALID_QUEUE_PRIORITY	0x06
#define AAC_ERROR_FIB_ALLOCATION_FAILED		0x07
#define AAC_ERROR_FIB_DEALLOCATION_FAILED	0x08

/*
 *  Adapter Status Register
 *
 *  Phase Staus mailbox is 32bits:
 *  <31:16> = Phase Status
 *  <15:0>  = Phase
 *
 *  The adapter reports its present state through the phase.  Only
 *  a single phase should be ever be set.  Each phase can have multiple
 *  phase status bits to provide more detailed information about the
 *  state of the adapter.
 */
#define AAC_SELF_TEST_FAILED	0x00000004
#define AAC_UP_AND_RUNNING	0x00000080
#define AAC_KERNEL_PANIC	0x00000100