/* $OpenBSD: aacreg.h,v 1.5 2003/11/16 20:30:06 avsm Exp $ */ /*- * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 Scott Long * Copyright (c) 2000 BSDi * Copyright (c) 2000 Niklas Hallqvist * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: /c/ncvs/src/sys/dev/aac/aacreg.h,v 1.1 2000/09/13 03:20:34 msmith Exp $ */ /* * Data structures defining the interface between the driver and the Adaptec * 'FSA' adapters. Note that many field names and comments here are taken * verbatim from the Adaptec driver source in order to make comparing the * two slightly easier. */ /* * Misc. magic numbers. */ #define AAC_MAX_CONTAINERS 64 #define AAC_BLOCK_SIZE 512 /* * Communications interface. * * Where datastructure layouts are closely parallel to the Adaptec sample code, * retain their naming conventions (for now) to aid in cross-referencing. */ /* * We establish 4 command queues and matching response queues. Queues must * be 16-byte aligned, and are sized as follows: */ #define AAC_HOST_NORM_CMD_ENTRIES 8 /* cmd adapter->host, normal pri */ #define AAC_HOST_HIGH_CMD_ENTRIES 4 /* cmd adapter->host, high pri */ #define AAC_ADAP_NORM_CMD_ENTRIES 512 /* cmd host->adapter, normal pri */ #define AAC_ADAP_HIGH_CMD_ENTRIES 4 /* cmd host->adapter, high pri */ #define AAC_HOST_NORM_RESP_ENTRIES 512 /* resp, adapter->host, normal pri */ #define AAC_HOST_HIGH_RESP_ENTRIES 4 /* resp, adapter->host, high pri */ #define AAC_ADAP_NORM_RESP_ENTRIES 8 /* resp, host->adapter, normal pri */ #define AAC_ADAP_HIGH_RESP_ENTRIES 4 /* resp, host->adapter, high pri */ #define AAC_TOTALQ_LENGTH \ (AAC_HOST_HIGH_CMD_ENTRIES + AAC_HOST_NORM_CMD_ENTRIES + \ AAC_ADAP_HIGH_CMD_ENTRIES + AAC_ADAP_NORM_CMD_ENTRIES + \ AAC_HOST_HIGH_RESP_ENTRIES + AAC_HOST_NORM_RESP_ENTRIES + \ AAC_ADAP_HIGH_RESP_ENTRIES + AAC_ADAP_NORM_RESP_ENTRIES) #define AAC_QUEUE_COUNT 8 #define AAC_QUEUE_ALIGN 16 struct aac_queue_entry { u_int32_t aq_fib_size; /* FIB size in bytes */ u_int32_t aq_fib_addr; /* receiver-space address of the FIB */ } __attribute__ ((__packed__)); #define AAC_PRODUCER_INDEX 0 #define AAC_CONSUMER_INDEX 1 /* * Table of queue indices and queues used to communicate with the * controller. This structure must be aligned to AAC_QUEUE_ALIGN */ struct aac_queue_table { /* queue consumer/producer indexes (layout mandated by adapter) */ u_int32_t qt_qindex[AAC_QUEUE_COUNT][2]; /* queue entry structures (layout mandated by adapter) */ struct aac_queue_entry qt_HostNormCmdQueue[AAC_HOST_NORM_CMD_ENTRIES]; struct aac_queue_entry qt_HostHighCmdQueue[AAC_HOST_HIGH_CMD_ENTRIES]; struct aac_queue_entry qt_AdapNormCmdQueue[AAC_ADAP_NORM_CMD_ENTRIES]; struct aac_queue_entry qt_AdapHighCmdQueue[AAC_ADAP_HIGH_CMD_ENTRIES]; struct aac_queue_entry qt_HostNormRespQueue[AAC_HOST_NORM_RESP_ENTRIES]; struct aac_queue_entry qt_HostHighRespQueue[AAC_HOST_HIGH_RESP_ENTRIES]; struct aac_queue_entry qt_AdapNormRespQueue[AAC_ADAP_NORM_RESP_ENTRIES]; struct aac_queue_entry qt_AdapHighRespQueue[AAC_ADAP_HIGH_RESP_ENTRIES]; } __attribute__ ((__packed__)); /* * Adapter Init Structure: this is passed to the adapter with the * AAC_MONKER_INITSTRUCT command to point it at our control structures. */ struct aac_adapter_init { u_int32_t InitStructRevision; #define AAC_INIT_STRUCT_REVISION 3 u_int32_t MiniPortRevision; u_int32_t FilesystemRevision; u_int32_t CommHeaderAddress; u_int32_t FastIoCommAreaAddress; u_int32_t AdapterFibsPhysicalAddress; void *AdapterFibsVirtualAddress; u_int32_t AdapterFibsSize; u_int32_t AdapterFibAlign; u_int32_t PrintfBufferAddress; u_int32_t PrintfBufferSize; u_int32_t HostPhysMemPages; u_int32_t HostElapsedSeconds; } __packed; /* * Shared data types */ /* * Container types */ typedef enum { CT_NONE = 0, CT_VOLUME, CT_MIRROR, CT_STRIPE, CT_RAID5, CT_SSRW, CT_SSRO, CT_MORPH, CT_PASSTHRU, CT_RAID4, CT_RAID10, /* stripe of mirror */ CT_RAID00, /* stripe of stripe */ CT_VOLUME_OF_MIRRORS, /* volume of mirror */ CT_PSEUDO_RAID3 /* really raid4 */ } AAC_FSAVolType; /* * Host-addressable object types */ typedef enum { FT_REG = 1, /* regular file */ FT_DIR, /* directory */ FT_BLK, /* "block" device - reserved */ FT_CHR, /* "character special" device - reserved */ FT_LNK, /* symbolic link */ FT_SOCK, /* socket */ FT_FIFO, /* fifo */ FT_FILESYS, /* ADAPTEC's "FSA"(tm) filesystem */ FT_DRIVE, /* phys disk - addressable in scsi by bus/target/lun */ FT_SLICE, /* virtual disk - raw volume - slice */ FT_PARTITION, /* FSA part, inside slice, container building block */ FT_VOLUME, /* Container - Volume Set */ FT_STRIPE, /* Container - Stripe Set */ FT_MIRROR, /* Container - Mirror Set */ FT_RAID5, /* Container - Raid 5 Set */ FT_DATABASE /* Storage object with "foreign" content manager */ } AAC_FType; /* * Host-side scatter/gather list for 32-bit commands. */ struct aac_sg_entry { u_int32_t SgAddress; u_int32_t SgByteCount; } __attribute__ ((__packed__)); struct aac_sg_table { u_int32_t SgCount; struct aac_sg_entry SgEntry[0]; } __attribute__ ((__packed__)); /* * Host-side scatter/gather list for 64-bit commands. */ struct aac_sg_table64 { u_int8_t SgCount; u_int8_t SgSectorsPerPage; u_int16_t SgByteOffset; u_int64_t SgEntry[0]; } __attribute__ ((__packed__)); /* * Container creation data */ struct aac_container_creation { u_int8_t ViaBuildNumber; u_int8_t MicroSecond; u_int8_t Via; /* 1 = FSU, 2 = API, etc. */ u_int8_t YearsSince1900; u_int32_t Month:4; /* 1-12 */ u_int32_t Day:6; /* 1-32 */ u_int32_t Hour:6; /* 0-23 */ u_int32_t Minute:6; /* 0-59 */ u_int32_t Second:6; /* 0-59 */ u_int64_t ViaAdapterSerialNumber; } __attribute__ ((__packed__)); struct FsaRevision { union { struct { u_int8_t dash; u_int8_t type; u_int8_t minor; u_int8_t major; } comp; u_int32_t ul; } external; u_int32_t buildNumber; } __packed; /* * Adapter Information */ typedef enum { CPU_NTSIM = 1, CPU_I960, CPU_ARM, CPU_SPARC, CPU_POWERPC, CPU_ALPHA, CPU_P7, CPU_I960_RX, CPU__last } AAC_CpuType; typedef enum { CPUI960_JX = 1, CPUI960_CX, CPUI960_HX, CPUI960_RX, CPUARM_SA110, CPUARM_xxx, CPUPPC_603e, CPUPPC_xxx, CPUSUBTYPE__last } AAC_CpuSubType; typedef enum { PLAT_NTSIM = 1, PLAT_V3ADU, PLAT_CYCLONE, PLAT_CYCLONE_HD, PLAT_BATBOARD, PLAT_BATBOARD_HD, PLAT_YOLO, PLAT_COBRA, PLAT_ANAHEIM, PLAT_JALAPENO, PLAT_QUEENS, PLAT_JALAPENO_DELL, PLAT_POBLANO, PLAT_POBLANO_OPAL, PLAT_POBLANO_SL0, PLAT_POBLANO_SL1, PLAT_POBLANO_SL2, PLAT_POBLANO_XXX, PLAT_JALAPENO_P2, PLAT_HABANERO, PLAT__last } AAC_Platform; typedef enum { OEM_FLAVOR_ADAPTEC = 1, OEM_FLAVOR_DELL, OEM_FLAVOR_HP, OEM_FLAVOR_IBM, OEM_FLAVOR_CPQ, OEM_FLAVOR_BRAND_X, OEM_FLAVOR_BRAND_Y, OEM_FLAVOR_BRAND_Z, OEM_FLAVOR__last } AAC_OemFlavor; /* * XXX the aac-2622 with no battery present reports PLATFORM_BAT_OPT_PRESENT */ typedef enum { PLATFORM_BAT_REQ_PRESENT = 1, /* BATTERY REQUIRED AND PRESENT */ PLATFORM_BAT_REQ_NOTPRESENT, /* BATTERY REQUIRED AND NOT PRESENT */ PLATFORM_BAT_OPT_PRESENT, /* BATTERY OPTIONAL AND PRESENT */ PLATFORM_BAT_OPT_NOTPRESENT, /* BATTERY OPTIONAL AND NOT PRESENT */ PLATFORM_BAT_NOT_SUPPORTED /* BATTERY NOT SUPPORTED */ } AAC_BatteryPlatform; /* * Structure used to respond to a RequestAdapterInfo fib. */ struct aac_adapter_info { AAC_Platform PlatformBase; /* adapter type */ AAC_CpuType CpuArchitecture; /* adapter CPU type */ AAC_CpuSubType CpuVariant; /* adapter CPU subtype */ u_int32_t ClockSpeed; /* adapter CPU clockspeed */ u_int32_t ExecutionMem; /* adapter Execution Memory size */ u_int32_t BufferMem; /* adapter Data Memory */ u_int32_t TotalMem; /* adapter Total Memory */ struct FsaRevision KernelRevision; /* adapter Kernel SW Revision */ struct FsaRevision MonitorRevision; /* adapter Monitor/Diag SW Rev */ struct FsaRevision HardwareRevision; /* TDB */ struct FsaRevision BIOSRevision; /* adapter BIOS Revision */ u_int32_t ClusteringEnabled; u_int32_t ClusterChannelMask; u_int64_t SerialNumber; AAC_BatteryPlatform batteryPlatform; u_int32_t SupportedOptions; /* supported features of this ctrlr */ AAC_OemFlavor OemVariant; } __packed; /* * Monitor/Kernel interface. */ /* * Synchronous commands to the monitor/kernel. */ #define AAC_MONKER_INITSTRUCT 0x05 #define AAC_MONKER_SYNCFIB 0x0c /* * Command status values */ typedef enum { ST_OK = 0, ST_PERM = 1, ST_NOENT = 2, ST_IO = 5, ST_NXIO = 6, ST_E2BIG = 7, ST_ACCES = 13, ST_EXIST = 17, ST_XDEV = 18, ST_NODEV = 19, ST_NOTDIR = 20, ST_ISDIR = 21, ST_INVAL = 22, ST_FBIG = 27, ST_NOSPC = 28, ST_ROFS = 30, ST_MLINK = 31, ST_WOULDBLOCK = 35, ST_NAMETOOLONG = 63, ST_NOTEMPTY = 66, ST_DQUOT = 69, ST_STALE = 70, ST_REMOTE = 71, ST_BADHANDLE = 10001, ST_NOT_SYNC = 10002, ST_BAD_COOKIE = 10003, ST_NOTSUPP = 10004, ST_TOOSMALL = 10005, ST_SERVERFAULT = 10006, ST_BADTYPE = 10007, ST_JUKEBOX = 10008, ST_NOTMOUNTED = 10009, ST_MAINTMODE = 10010, ST_STALEACL = 10011 } AAC_FSAStatus; /* * Volume manager commands */ typedef enum _VM_COMMANDS { VM_Null = 0, VM_NameServe, VM_ContainerConfig, VM_Ioctl, VM_FilesystemIoctl, VM_CloseAll, VM_CtBlockRead, VM_CtBlockWrite, VM_SliceBlockRead, /* raw access to configured "storage objects" */ VM_SliceBlockWrite, VM_DriveBlockRead, /* raw access to physical devices */ VM_DriveBlockWrite, VM_EnclosureMgt, /* enclosure management */ VM_Unused, /* used to be diskset management */ VM_CtBlockVerify, VM_CtPerf, /* performance test */ VM_CtBlockRead64, VM_CtBlockWrite64, VM_CtBlockVerify64, } AAC_VMCommand; /* * "Mountable object" */ struct aac_mntobj { u_int32_t ObjectId; char FileSystemName[16]; struct aac_container_creation CreateInfo; u_int32_t Capacity; AAC_FSAVolType VolType; AAC_FType ObjType; u_int32_t ContentState; #define AAC_FSCS_READONLY 0x0002 /* XXX need more information than this */ union { u_int32_t pad[8]; } ObjExtension; u_int32_t AlterEgoId; } __attribute__ ((__packed__)); struct aac_mntinfo { AAC_VMCommand Command; AAC_FType MntType; u_int32_t MntCount; } __attribute__ ((__packed__)); struct aac_mntinforesponse { AAC_FSAStatus Status; AAC_FType MntType; u_int32_t MntRespCount; struct aac_mntobj MntTable[1]; } __attribute__ ((__packed__)); /* * Write 'stability' options. */ typedef enum { CSTABLE = 1, CUNSTABLE } AAC_CacheLevel; /* * Commit level response for a write request. */ typedef enum { CMFILE_SYNC_NVRAM = 1, CMDATA_SYNC_NVRAM, CMFILE_SYNC, CMDATA_SYNC, CMUNSTABLE } AAC_CommitLevel; /* * Block read/write operations. * These structures are packed into the 'data' area in the FIB. */ struct aac_blockread { AAC_VMCommand Command; /* not FSACommand! */ u_int32_t ContainerId; u_int32_t BlockNumber; u_int32_t ByteCount; struct aac_sg_table SgMap; /* variable size */ } __attribute__ ((__packed__)); struct aac_blockread_response { AAC_FSAStatus Status; u_int32_t ByteCount; } __attribute__ ((__packed__)); struct aac_blockwrite { AAC_VMCommand Command; /* not FSACommand! */ u_int32_t ContainerId; u_int32_t BlockNumber; u_int32_t ByteCount; AAC_CacheLevel Stable; struct aac_sg_table SgMap; /* variable size */ } __attribute__ ((__packed__)); struct aac_blockwrite_response { AAC_FSAStatus Status; u_int32_t ByteCount; AAC_CommitLevel Committed; } __attribute__ ((__packed__)); /* * Register definitions for the Adaptec AAC-364 'Jalapeno I/II' adapters, based * on the SA110 'StrongArm'. */ #define AAC_REGSIZE 0x100 /* doorbell 0 (adapter->host) */ #define AAC_SA_DOORBELL0_CLEAR 0x98 #define AAC_SA_DOORBELL0_SET 0x9c #define AAC_SA_DOORBELL0 0x9c #define AAC_SA_MASK0_CLEAR 0xa0 #define AAC_SA_MASK0_SET 0xa4 /* doorbell 1 (host->adapter) */ #define AAC_SA_DOORBELL1_CLEAR 0x9a #define AAC_SA_DOORBELL1_SET 0x9e #define AAC_SA_MASK1_CLEAR 0xa2 #define AAC_SA_MASK1_SET 0xa6 /* mailbox (20 bytes) */ #define AAC_SA_MAILBOX 0xa8 #define AAC_SA_FWSTATUS 0xc4 /* * Register definitions for the Adaptec 'Pablano' adapters, based on the * i960Rx, and other related adapters. */ #define AAC_RX_IDBR 0x20 /* inbound doorbell */ #define AAC_RX_IISR 0x24 /* inbound interrupt status */ #define AAC_RX_IIMR 0x28 /* inbound interrupt mask */ #define AAC_RX_ODBR 0x2c /* outbound doorbell */ #define AAC_RX_OISR 0x30 /* outbound interrupt status */ #define AAC_RX_OIMR 0x34 /* outbound interrupt mask */ #define AAC_RX_MAILBOX 0x50 /* mailbox (20 bytes) */ #define AAC_RX_FWSTATUS 0x6c /* * Common bit definitions for the doorbell registers. */ /* * Status bits in the doorbell registers. */ #define AAC_DB_SYNC_COMMAND (1<<0) /* send/completed synchronous FIB */ #define AAC_DB_COMMAND_READY (1<<1) /* posted one or more commands */ #define AAC_DB_RESPONSE_READY (1<<2) /* one or more commands complete */ #define AAC_DB_COMMAND_NOT_FULL (1<<3) /* command queue not full */ #define AAC_DB_RESPONSE_NOT_FULL (1<<4) /* response queue not full */ /* * The adapter can request the host print a message by setting the * DB_PRINTF flag in DOORBELL0. The driver responds by collecting the * message from the printf buffer, clearing the DB_PRINTF flag in * DOORBELL0 and setting it in DOORBELL1. * (ODBR and IDBR respectively for the i960Rx adapters) */ #define AAC_DB_PRINTF (1<<5) /* * Mask containing the interrupt bits we care about. We don't anticipate * (or want) interrupts not in this mask. */ #define AAC_DB_INTERRUPTS \ (AAC_DB_COMMAND_READY | AAC_DB_RESPONSE_READY | AAC_DB_PRINTF) /* * Queue names * * Note that we base these at 0 in order to use them as array indices. Adaptec * used base 1 for some unknown reason, and sorted them in a different order. */ #define AAC_HOST_NORM_CMD_QUEUE 0 #define AAC_HOST_HIGH_CMD_QUEUE 1 #define AAC_ADAP_NORM_CMD_QUEUE 2 #define AAC_ADAP_HIGH_CMD_QUEUE 3 #define AAC_HOST_NORM_RESP_QUEUE 4 #define AAC_HOST_HIGH_RESP_QUEUE 5 #define AAC_ADAP_NORM_RESP_QUEUE 6 #define AAC_ADAP_HIGH_RESP_QUEUE 7 /* * List structure used to chain FIBs (used by the adapter - we hang FIBs off * our private command structure and don't touch these) */ struct aac_fib_list_entry { struct fib_list_entry *Flink; struct fib_list_entry *Blink; } __packed; /* * FIB (FSA Interface Block?); this is the datastructure passed between the * host and adapter. */ struct aac_fib_header { u_int32_t XferState; u_int16_t Command; u_int8_t StructType; u_int8_t Flags; u_int16_t Size; u_int16_t SenderSize; u_int32_t SenderFibAddress; u_int32_t ReceiverFibAddress; u_int32_t SenderData; union { struct { u_int32_t ReceiverTimeStart; u_int32_t ReceiverTimeDone; } _s; struct aac_fib_list_entry FibLinks; } _u; } __packed; #define AAC_FIB_DATASIZE (512 - sizeof(struct aac_fib_header)) struct aac_fib { struct aac_fib_header Header; u_int8_t data[AAC_FIB_DATASIZE]; } __packed; /* * FIB commands */ typedef enum { TestCommandResponse = 1, TestAdapterCommand = 2, /* lowlevel and comm commands */ LastTestCommand = 100, ReinitHostNormCommandQueue = 101, ReinitHostHighCommandQueue = 102, ReinitHostHighRespQueue = 103, ReinitHostNormRespQueue = 104, ReinitAdapNormCommandQueue = 105, ReinitAdapHighCommandQueue = 107, ReinitAdapHighRespQueue = 108, ReinitAdapNormRespQueue = 109, InterfaceShutdown = 110, DmaCommandFib = 120, StartProfile = 121, TermProfile = 122, SpeedTest = 123, TakeABreakPt = 124, RequestPerfData = 125, SetInterruptDefTimer= 126, SetInterruptDefCount= 127, GetInterruptDefStatus= 128, LastCommCommand = 129, /* filesystem commands */ NuFileSystem = 300, UFS = 301, HostFileSystem = 302, LastFileSystemCommand = 303, /* Container Commands */ ContainerCommand = 500, ContainerCommand64 = 501, /* Cluster Commands */ ClusterCommand = 550, /* Scsi Port commands (scsi passthrough) */ ScsiPortCommand = 600, /* misc house keeping and generic adapter initiated commands */ AifRequest = 700, CheckRevision = 701, FsaHostShutdown = 702, RequestAdapterInfo = 703, IsAdapterPaused = 704, SendHostTime = 705, LastMiscCommand = 706 } AAC_FibCommands; /* * FIB types */ #define AAC_FIBTYPE_TFIB 1 #define AAC_FIBTYPE_TQE 2 #define AAC_FIBTYPE_TCTPERF 3 /* * FIB transfer state */ #define AAC_FIBSTATE_HOSTOWNED (1<<0) /* owned by the host */ #define AAC_FIBSTATE_ADAPTEROWNED (1<<1) /* owned by the adapter */ #define AAC_FIBSTATE_INITIALISED (1<<2) /* initialised */ #define AAC_FIBSTATE_EMPTY (1<<3) /* empty */ #define AAC_FIBSTATE_FROMPOOL (1<<4) /* allocated from pool */ #define AAC_FIBSTATE_FROMHOST (1<<5) /* sent from the host */ #define AAC_FIBSTATE_FROMADAP (1<<6) /* sent from the adapter */ #define AAC_FIBSTATE_REXPECTED (1<<7) /* response is expected */ #define AAC_FIBSTATE_RNOTEXPECTED (1<<8) /* response is not expected */ #define AAC_FIBSTATE_DONEADAP (1<<9) /* processed by the adapter */ #define AAC_FIBSTATE_DONEHOST (1<<10) /* processed by the host */ #define AAC_FIBSTATE_HIGH (1<<11) /* high priority */ #define AAC_FIBSTATE_NORM (1<<12) /* normal priority */ #define AAC_FIBSTATE_ASYNC (1<<13) #define AAC_FIBSTATE_ASYNCIO (1<<13) /* to be removed */ #define AAC_FIBSTATE_PAGEFILEIO (1<<14) /* to be removed */ #define AAC_FIBSTATE_SHUTDOWN (1<<15) #define AAC_FIBSTATE_LAZYWRITE (1<<16) /* to be removed */ #define AAC_FIBSTATE_ADAPMICROFIB (1<<17) #define AAC_FIBSTATE_BIOSFIB (1<<18) #define AAC_FIBSTATE_FAST_RESPONSE (1<<19) /* fast response capable */ #define AAC_FIBSTATE_APIFIB (1<<20) /* * FIB error values */ #define AAC_ERROR_NORMAL 0x00 #define AAC_ERROR_PENDING 0x01 #define AAC_ERROR_FATAL 0x02 #define AAC_ERROR_INVALID_QUEUE 0x03 #define AAC_ERROR_NOENTRIES 0x04 #define AAC_ERROR_SENDFAILED 0x05 #define AAC_ERROR_INVALID_QUEUE_PRIORITY 0x06 #define AAC_ERROR_FIB_ALLOCATION_FAILED 0x07 #define AAC_ERROR_FIB_DEALLOCATION_FAILED 0x08 /* * Adapter Status Register * * Phase Staus mailbox is 32bits: * <31:16> = Phase Status * <15:0> = Phase * * The adapter reports its present state through the phase. Only * a single phase should be ever be set. Each phase can have multiple * phase status bits to provide more detailed information about the * state of the adapter. */ #define AAC_SELF_TEST_FAILED 0x00000004 #define AAC_UP_AND_RUNNING 0x00000080 #define AAC_KERNEL_PANIC 0x00000100