/* $OpenBSD: ad1848reg.h,v 1.5 1998/04/26 21:03:12 provos Exp $ */ /* $NetBSD: ad1848reg.h,v 1.4 1997/05/07 20:23:53 augustss Exp $ */ /* * Copyright (c) 1994 John Brezak * Copyright (c) 1991-1993 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Computer Systems * Engineering Group at Lawrence Berkeley Laboratory. * 4. Neither the name of the University nor of the Laboratory may be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * Copyright (c) 1993 Analog Devices Inc. All rights reserved */ /* parent driver is primarily responsible for checking this */ #define AD1848_BASE_VALID(base) (((base) & 0x003) == 0) /* AD1848 direct registers */ #define AD1848_IADDR 0x00 #define AD1848_IDATA 0x01 #define AD1848_STATUS 0x02 #define AD1848_PIO 0x03 /* Gain constants */ #define GAIN_0 0x00 #define GAIN_1_5 0x01 #define GAIN_3 0x02 #define GAIN_4_5 0x03 #define GAIN_6 0x04 #define GAIN_7_5 0x05 #define GAIN_9 0x06 #define GAIN_10_5 0x07 #define GAIN_12 0x08 #define GAIN_13_5 0x09 #define GAIN_15 0x0a #define GAIN_16_5 0x0b #define GAIN_18 0x0c #define GAIN_19_5 0x0d #define GAIN_21 0x0e #define GAIN_22_5 0x0f /* Attenuation constants */ #define ATTEN_0 0x00 #define ATTEN_1_5 0x01 #define ATTEN_3 0x02 #define ATTEN_4_5 0x03 #define ATTEN_6 0x04 #define ATTEN_7_5 0x05 #define ATTEN_9 0x06 #define ATTEN_10_5 0x07 #define ATTEN_12 0x08 #define ATTEN_13_5 0x09 #define ATTEN_15 0x0a #define ATTEN_16_5 0x0b #define ATTEN_18 0x0c #define ATTEN_19_5 0x0d #define ATTEN_21 0x0e #define ATTEN_22_5 0x0f /* AD1848 Sound Port bit defines */ #define SP_IN_INIT 0x80 #define MODE_CHANGE_ENABLE 0x40 #define TRANSFER_DISABLE 0x20 #define ADDRESS_MASK 0xe0 /* Status bits */ #define INTERRUPT_STATUS 0x01 #define PLAYBACK_READY 0x02 #define PLAYBACK_LEFT 0x04 /* pbright is not left */ #define PLAYBACK_UPPER 0x08 /* bplower is not upper */ #define SAMPLE_ERROR 0x10 #define CAPTURE_READY 0x20 #define CAPTURE_LEFT 0x40 /* cpright is not left */ #define CAPTURE_UPPER 0x80 /* cplower is not upper */ /* Input & Output regs bits */ #define LINE_INPUT 0x00 #define AUX_INPUT 0x40 #define MIC_INPUT 0x80 #define MIXED_DAC_INPUT 0xc0 #define INPUT_GAIN_MASK 0xf0 #define INPUT_MIC_GAIN_ENABLE 0x20 #define INPUT_SOURCE_MASK 0x3f #define AUX_INPUT_ATTEN_BITS 0x1f #define AUX_INPUT_ATTEN_MASK 0xe0 #define AUX_INPUT_MUTE 0x80 #define OUTPUT_MUTE 0x80 #define OUTPUT_ATTEN_BITS 0x3f #define OUTPUT_ATTEN_MASK 0xc0 /* Clock and Data format reg bits (some also Capture Data format) */ #define CLOCK_XTAL2 0x01 #define CLOCK_XTAL1 0x00 #define CLOCK_FREQ_MASK 0xf1 #define FMT_MONO 0x00 #define FMT_STEREO 0x10 #define FORMAT_MASK 0x1f #define FMT_PCM8 0x00 /* 8-bit unsigned */ #define FMT_ULAW 0x20 /* 8-bit mu-law */ #define FMT_TWOS_COMP 0x40 /* 16-bit signed */ #define FMT_ALAW 0x60 /* 8-bit alaw */ #define FMT_ADPCM 0xa0 /* IMA ADPCM */ #define FMT_TWOS_COMP_BE 0xc0 /* 16-bit signed, big endian */ /* Interface Configuration reg bits */ #define PLAYBACK_ENABLE 0x01 #define CAPTURE_ENABLE 0x02 #define DUAL_DMA 0x00 #define SINGLE_DMA 0x04 #define AUTO_CAL_ENABLE 0x08 #define PLAYBACK_PIO_ENABLE 0x40 #define CAPTURE_PIO_ENABLE 0x80 /* Pin control bits */ #define INTERRUPT_ENABLE 0x02 #define XCTL0_ENABLE 0x40 #define XCTL1_ENABLE 0x80 /* Test and init reg bits */ #define OVERRANGE_LEFT_MASK 0xfc #define OVERRANGE_RIGHT_MASK 0xf3 #define DATA_REQUEST_STATUS 0x10 #define AUTO_CAL_IN_PROG 0x20 #define PLAYBACK_UNDERRUN 0x40 #define CAPTURE_OVERRUN 0x80 /* Miscellaneous Control reg bits */ #define ID_MASK 0x70 #define MODE2 0x40 /* Digital Mix Control reg bits */ #define DIGITAL_MIX1_ENABLE 0x01 #define MIX_ATTEN_MASK 0xfc /* AD1848 Sound Port reg defines */ #define SP_LEFT_INPUT_CONTROL 0x00 #define SP_RIGHT_INPUT_CONTROL 0x01 #define SP_LEFT_AUX1_CONTROL 0x02 #define SP_RIGHT_AUX1_CONTROL 0x03 #define SP_LEFT_AUX2_CONTROL 0x04 #define SP_RIGHT_AUX2_CONTROL 0x05 #define SP_LEFT_OUTPUT_CONTROL 0x06 #define SP_RIGHT_OUTPUT_CONTROL 0x07 #define SP_CLOCK_DATA_FORMAT 0x08 #define SP_INTERFACE_CONFIG 0x09 #define SP_PIN_CONTROL 0x0A #define SP_TEST_AND_INIT 0x0B #define SP_MISC_INFO 0x0C #define SP_DIGITAL_MIX 0x0D #define SP_UPPER_BASE_COUNT 0x0E #define SP_LOWER_BASE_COUNT 0x0F