/* $OpenBSD: adw.c,v 1.20 2001/07/11 17:31:24 krw Exp $ */ /* $NetBSD: adw.c,v 1.23 2000/05/27 18:24:50 dante Exp $ */ /* * Generic driver for the Advanced Systems Inc. SCSI controllers * * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. * All rights reserved. * * Author: Baldassare Dante Profeta * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef DDB #define Debugger() panic("should call debugger here (adw.c)") #endif /* ! DDB */ /******************************************************************************/ void adw_enqueue __P((ADW_SOFTC *, struct scsi_xfer *, int)); struct scsi_xfer *adw_dequeue __P((ADW_SOFTC *)); int adw_alloc_controls __P((ADW_SOFTC *)); int adw_alloc_carriers __P((ADW_SOFTC *)); int adw_create_ccbs __P((ADW_SOFTC *, ADW_CCB *, int)); void adw_free_ccb __P((ADW_SOFTC *, ADW_CCB *)); void adw_reset_ccb __P((ADW_CCB *)); int adw_init_ccb __P((ADW_SOFTC *, ADW_CCB *)); ADW_CCB *adw_get_ccb __P((ADW_SOFTC *, int)); int adw_queue_ccb __P((ADW_SOFTC *, ADW_CCB *, int)); int adw_scsi_cmd __P((struct scsi_xfer *)); int adw_build_req __P((struct scsi_xfer *, ADW_CCB *, int)); void adw_build_sglist __P((ADW_CCB *, ADW_SCSI_REQ_Q *, ADW_SG_BLOCK *)); void adw_minphys __P((struct buf *)); void adw_isr_callback __P((ADW_SOFTC *, ADW_SCSI_REQ_Q *)); void adw_async_callback __P((ADW_SOFTC *, u_int8_t)); void adw_print_info __P((ADW_SOFTC *, int)); int adw_poll __P((ADW_SOFTC *, struct scsi_xfer *, int)); void adw_timeout __P((void *)); void adw_reset_bus __P((ADW_SOFTC *)); /******************************************************************************/ struct cfdriver adw_cd = { NULL, "adw", DV_DULL }; /* the below structure is so we have a default dev struct for our link struct */ struct scsi_device adw_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ }; /******************************************************************************/ /* scsi_xfer queue routines */ /******************************************************************************/ /* * Insert a scsi_xfer into the software queue. We overload xs->free_list * to avoid having to allocate additional resources (since we're used * only during resource shortages anyhow. */ void adw_enqueue(sc, xs, infront) ADW_SOFTC *sc; struct scsi_xfer *xs; int infront; { if (infront || sc->sc_queue.lh_first == NULL) { if (sc->sc_queue.lh_first == NULL) sc->sc_queuelast = xs; LIST_INSERT_HEAD(&sc->sc_queue, xs, free_list); return; } LIST_INSERT_AFTER(sc->sc_queuelast, xs, free_list); sc->sc_queuelast = xs; } /* * Pull a scsi_xfer off the front of the software queue. */ struct scsi_xfer * adw_dequeue(sc) ADW_SOFTC *sc; { struct scsi_xfer *xs; xs = sc->sc_queue.lh_first; LIST_REMOVE(xs, free_list); if (sc->sc_queue.lh_first == NULL) sc->sc_queuelast = NULL; return (xs); } /******************************************************************************/ /* DMA Mapping for Control Blocks */ /******************************************************************************/ int adw_alloc_controls(sc) ADW_SOFTC *sc; { bus_dma_segment_t seg; int error, rseg; /* * Allocate the control structure. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct adw_control), NBPG, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { printf("%s: unable to allocate control structures," " error = %d\n", sc->sc_dev.dv_xname, error); return (error); } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(struct adw_control), (caddr_t *) & sc->sc_control, BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) { printf("%s: unable to map control structures, error = %d\n", sc->sc_dev.dv_xname, error); return (error); } /* * Create and load the DMA map used for the control blocks. */ if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(struct adw_control), 1, sizeof(struct adw_control), 0, BUS_DMA_NOWAIT, &sc->sc_dmamap_control)) != 0) { printf("%s: unable to create control DMA map, error = %d\n", sc->sc_dev.dv_xname, error); return (error); } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_control, sc->sc_control, sizeof(struct adw_control), NULL, BUS_DMA_NOWAIT)) != 0) { printf("%s: unable to load control DMA map, error = %d\n", sc->sc_dev.dv_xname, error); return (error); } return (0); } int adw_alloc_carriers(sc) ADW_SOFTC *sc; { bus_dma_segment_t seg; int error, rseg; /* * Allocate the control structure. */ sc->sc_control->carriers = malloc(sizeof(ADW_CARRIER) * ADW_MAX_CARRIER, M_DEVBUF, M_NOWAIT); if (sc->sc_control->carriers == NULL) return (ENOMEM); if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(ADW_CARRIER) * ADW_MAX_CARRIER, 0x10, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { printf("%s: unable to allocate carrier structures," " error = %d\n", sc->sc_dev.dv_xname, error); return (error); } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(ADW_CARRIER) * ADW_MAX_CARRIER, (caddr_t *) &sc->sc_control->carriers, BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) { printf("%s: unable to map carrier structures," " error = %d\n", sc->sc_dev.dv_xname, error); return (error); } /* * Create and load the DMA map used for the control blocks. */ if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(ADW_CARRIER) * ADW_MAX_CARRIER, 1, sizeof(ADW_CARRIER) * ADW_MAX_CARRIER, 0,BUS_DMA_NOWAIT, &sc->sc_dmamap_carrier)) != 0) { printf("%s: unable to create carriers DMA map," " error = %d\n", sc->sc_dev.dv_xname, error); return (error); } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_carrier, sc->sc_control->carriers, sizeof(ADW_CARRIER) * ADW_MAX_CARRIER, NULL, BUS_DMA_NOWAIT)) != 0) { printf("%s: unable to load carriers DMA map," " error = %d\n", sc->sc_dev.dv_xname, error); return (error); } return (0); } /******************************************************************************/ /* Control Blocks routines */ /******************************************************************************/ /* * Create a set of ccbs and add them to the free list. Called once * by adw_init(). We return the number of CCBs successfully created. */ int adw_create_ccbs(sc, ccbstore, count) ADW_SOFTC *sc; ADW_CCB *ccbstore; int count; { ADW_CCB *ccb; int i, error; for (i = 0; i < count; i++) { ccb = &ccbstore[i]; if ((error = adw_init_ccb(sc, ccb)) != 0) { printf("%s: unable to initialize ccb, error = %d\n", sc->sc_dev.dv_xname, error); return (i); } TAILQ_INSERT_TAIL(&sc->sc_free_ccb, ccb, chain); } return (i); } /* * A ccb is put onto the free list. */ void adw_free_ccb(sc, ccb) ADW_SOFTC *sc; ADW_CCB *ccb; { int s; s = splbio(); adw_reset_ccb(ccb); TAILQ_INSERT_HEAD(&sc->sc_free_ccb, ccb, chain); /* * If there were none, wake anybody waiting for one to come free, * starting with queued entries. */ if (ccb->chain.tqe_next == 0) wakeup(&sc->sc_free_ccb); splx(s); } void adw_reset_ccb(ccb) ADW_CCB *ccb; { ccb->flags = 0; } int adw_init_ccb(sc, ccb) ADW_SOFTC *sc; ADW_CCB *ccb; { int hashnum, error; /* * Create the DMA map for this CCB. */ error = bus_dmamap_create(sc->sc_dmat, (ADW_MAX_SG_LIST - 1) * PAGE_SIZE, ADW_MAX_SG_LIST, (ADW_MAX_SG_LIST - 1) * PAGE_SIZE, 0, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, &ccb->dmamap_xfer); if (error) { printf("%s: unable to create CCB DMA map, error = %d\n", sc->sc_dev.dv_xname, error); return (error); } /* * put in the phystokv hash table * Never gets taken out. */ ccb->hashkey = sc->sc_dmamap_control->dm_segs[0].ds_addr + ADW_CCB_OFF(ccb); hashnum = CCB_HASH(ccb->hashkey); ccb->nexthash = sc->sc_ccbhash[hashnum]; sc->sc_ccbhash[hashnum] = ccb; adw_reset_ccb(ccb); return (0); } /* * Get a free ccb * * If there are none, see if we can allocate a new one */ ADW_CCB * adw_get_ccb(sc, flags) ADW_SOFTC *sc; int flags; { ADW_CCB *ccb = 0; int s; s = splbio(); /* * If we can and have to, sleep waiting for one to come free * but only if we can't allocate a new one. */ for (;;) { ccb = sc->sc_free_ccb.tqh_first; if (ccb) { TAILQ_REMOVE(&sc->sc_free_ccb, ccb, chain); break; } if ((flags & SCSI_NOSLEEP) != 0) goto out; tsleep(&sc->sc_free_ccb, PRIBIO, "adwccb", 0); } ccb->flags |= CCB_ALLOC; out: splx(s); return (ccb); } /* * Given a physical address, find the ccb that it corresponds to. */ ADW_CCB * adw_ccb_phys_kv(sc, ccb_phys) ADW_SOFTC *sc; u_int32_t ccb_phys; { int hashnum = CCB_HASH(ccb_phys); ADW_CCB *ccb = sc->sc_ccbhash[hashnum]; while (ccb) { if (ccb->hashkey == ccb_phys) break; ccb = ccb->nexthash; } return (ccb); } /* * Queue a CCB to be sent to the controller, and send it if possible. */ int adw_queue_ccb(sc, ccb, retry) ADW_SOFTC *sc; ADW_CCB *ccb; int retry; { int errcode = ADW_SUCCESS; if(!retry) { TAILQ_INSERT_TAIL(&sc->sc_waiting_ccb, ccb, chain); } while ((ccb = sc->sc_waiting_ccb.tqh_first) != NULL) { errcode = AdwExeScsiQueue(sc, &ccb->scsiq); switch(errcode) { case ADW_SUCCESS: break; case ADW_BUSY: printf("ADW_BUSY\n"); return(ADW_BUSY); case ADW_ERROR: printf("ADW_ERROR\n"); TAILQ_REMOVE(&sc->sc_waiting_ccb, ccb, chain); return(ADW_ERROR); } TAILQ_REMOVE(&sc->sc_waiting_ccb, ccb, chain); TAILQ_INSERT_TAIL(&sc->sc_pending_ccb, ccb, chain); /* ALWAYS initialize stimeout, lest it contain garbage! */ timeout_set(&ccb->xs->stimeout, adw_timeout, ccb); if ((ccb->xs->flags & SCSI_POLL) == 0) timeout_add(&ccb->xs->stimeout, (ccb->timeout * hz) / 1000); } return(errcode); } /******************************************************************************/ /* SCSI layer interfacing routines */ /******************************************************************************/ int adw_init(sc) ADW_SOFTC *sc; { u_int16_t warn_code; sc->cfg.lib_version = (ADW_LIB_VERSION_MAJOR << 8) | ADW_LIB_VERSION_MINOR; sc->cfg.chip_version = ADW_GET_CHIP_VERSION(sc->sc_iot, sc->sc_ioh, sc->bus_type); /* * Reset the chip to start and allow register writes. */ if (ADW_FIND_SIGNATURE(sc->sc_iot, sc->sc_ioh) == 0) { panic("adw_init: adw_find_signature failed"); } else { AdwResetChip(sc->sc_iot, sc->sc_ioh); warn_code = AdwInitFromEEPROM(sc); if (warn_code & ADW_WARN_EEPROM_CHKSUM) printf("%s: Bad checksum found. " "Setting default values\n", sc->sc_dev.dv_xname); if (warn_code & ADW_WARN_EEPROM_TERMINATION) printf("%s: Bad bus termination setting." "Using automatic termination.\n", sc->sc_dev.dv_xname); } sc->isr_callback = (ADW_CALLBACK) adw_isr_callback; sc->async_callback = (ADW_CALLBACK) adw_async_callback; return 0; } void adw_attach(sc) ADW_SOFTC *sc; { int i, error; TAILQ_INIT(&sc->sc_free_ccb); TAILQ_INIT(&sc->sc_waiting_ccb); TAILQ_INIT(&sc->sc_pending_ccb); LIST_INIT(&sc->sc_queue); /* * Allocate the Control Blocks. */ error = adw_alloc_controls(sc); if (error) return; /* (error) */ ; bzero(sc->sc_control, sizeof(struct adw_control)); /* * Create and initialize the Control Blocks. */ i = adw_create_ccbs(sc, sc->sc_control->ccbs, ADW_MAX_CCB); if (i == 0) { printf("%s: unable to create Control Blocks\n", sc->sc_dev.dv_xname); return; /* (ENOMEM) */ ; } else if (i != ADW_MAX_CCB) { printf("%s: WARNING: only %d of %d Control Blocks" " created\n", sc->sc_dev.dv_xname, i, ADW_MAX_CCB); } /* * Create and initialize the Carriers. */ error = adw_alloc_carriers(sc); if (error) return; /* (error) */ ; /* * Zero's the freeze_device status */ bzero(sc->sc_freeze_dev, sizeof(sc->sc_freeze_dev)); /* * Initialize the adapter */ switch (AdwInitDriver(sc)) { case ADW_IERR_BIST_PRE_TEST: panic("%s: BIST pre-test error", sc->sc_dev.dv_xname); break; case ADW_IERR_BIST_RAM_TEST: panic("%s: BIST RAM test error", sc->sc_dev.dv_xname); break; case ADW_IERR_MCODE_CHKSUM: panic("%s: Microcode checksum error", sc->sc_dev.dv_xname); break; case ADW_IERR_ILLEGAL_CONNECTION: panic("%s: All three connectors are in use", sc->sc_dev.dv_xname); break; case ADW_IERR_REVERSED_CABLE: panic("%s: Cable is reversed", sc->sc_dev.dv_xname); break; case ADW_IERR_HVD_DEVICE: panic("%s: HVD attached to LVD connector", sc->sc_dev.dv_xname); break; case ADW_IERR_SINGLE_END_DEVICE: panic("%s: single-ended device is attached to" " one of the connectors", sc->sc_dev.dv_xname); break; case ADW_IERR_NO_CARRIER: panic("%s: unable to create Carriers", sc->sc_dev.dv_xname); break; case ADW_WARN_BUSRESET_ERROR: printf("%s: WARNING: Bus Reset Error\n", sc->sc_dev.dv_xname); break; } /* * Fill in the adapter. */ sc->sc_adapter.scsi_cmd = adw_scsi_cmd; sc->sc_adapter.scsi_minphys = adw_minphys; /* * fill in the prototype scsi_link. */ sc->sc_link.adapter_softc = sc; sc->sc_link.adapter_target = sc->chip_scsi_id; sc->sc_link.adapter = &sc->sc_adapter; sc->sc_link.device = &adw_dev; sc->sc_link.openings = 4; sc->sc_link.adapter_buswidth = ADW_MAX_TID+1; config_found(&sc->sc_dev, &sc->sc_link, scsiprint); } void adw_minphys(bp) struct buf *bp; { if (bp->b_bcount > ((ADW_MAX_SG_LIST - 1) * PAGE_SIZE)) bp->b_bcount = ((ADW_MAX_SG_LIST - 1) * PAGE_SIZE); minphys(bp); } /* * start a scsi operation given the command and the data address. * Also needs the unit, target and lu. */ int adw_scsi_cmd(xs) struct scsi_xfer *xs; { struct scsi_link *sc_link = xs->sc_link; ADW_SOFTC *sc = sc_link->adapter_softc; ADW_CCB *ccb; int s, fromqueue = 1, dontqueue = 0, nowait = 0, retry = 0; int flags; s = splbio(); /* protect the queue */ /* * If we're running the queue from adw_done(), we've been * called with the first queue entry as our argument. */ if (xs == sc->sc_queue.lh_first) { if(sc->sc_freeze_dev[xs->sc_link->target]) { splx(s); return (TRY_AGAIN_LATER); } xs = adw_dequeue(sc); fromqueue = 1; nowait = 1; } else { if(sc->sc_freeze_dev[xs->sc_link->target]) { splx(s); xs->error = XS_DRIVER_STUFFUP; return (TRY_AGAIN_LATER); } /* Polled requests can't be queued for later. */ dontqueue = xs->flags & SCSI_POLL; /* * If there are jobs in the queue, run them first. */ if (sc->sc_queue.lh_first != NULL) { /* * If we can't queue, we have to abort, since * we have to preserve order. */ if (dontqueue) { splx(s); xs->error = XS_DRIVER_STUFFUP; return (TRY_AGAIN_LATER); } /* * Swap with the first queue entry. */ adw_enqueue(sc, xs, 0); xs = adw_dequeue(sc); fromqueue = 1; } } /* * get a ccb to use. If the transfer * is from a buf (possibly from interrupt time) * then we can't allow it to sleep */ flags = xs->flags; if (nowait) flags |= SCSI_NOSLEEP; if ((ccb = adw_get_ccb(sc, flags)) == NULL) { /* * If we can't queue, we lose. */ if (dontqueue) { splx(s); xs->error = XS_DRIVER_STUFFUP; return (TRY_AGAIN_LATER); } /* * Stuff ourselves into the queue, in front * if we came off in the first place. */ adw_enqueue(sc, xs, fromqueue); splx(s); return (SUCCESSFULLY_QUEUED); } splx(s); /* done playing with the queue */ ccb->xs = xs; ccb->timeout = xs->timeout; if (adw_build_req(xs, ccb, flags)) { retryagain: s = splbio(); retry = adw_queue_ccb(sc, ccb, retry); splx(s); switch(retry) { case ADW_BUSY: goto retryagain; case ADW_ERROR: xs->error = XS_DRIVER_STUFFUP; return (COMPLETE); } /* * Usually return SUCCESSFULLY QUEUED */ if ((xs->flags & SCSI_POLL) == 0) return (SUCCESSFULLY_QUEUED); /* * If we can't use interrupts, poll on completion */ if (adw_poll(sc, xs, ccb->timeout)) { adw_timeout(ccb); if (adw_poll(sc, xs, ccb->timeout)) adw_timeout(ccb); } } return (COMPLETE); } /* * Build a request structure for the Wide Boards. */ int adw_build_req(xs, ccb, flags) struct scsi_xfer *xs; ADW_CCB *ccb; int flags; { struct scsi_link *sc_link = xs->sc_link; ADW_SOFTC *sc = sc_link->adapter_softc; bus_dma_tag_t dmat = sc->sc_dmat; ADW_SCSI_REQ_Q *scsiqp; int error; scsiqp = &ccb->scsiq; bzero(scsiqp, sizeof(ADW_SCSI_REQ_Q)); /* * Set the ADW_SCSI_REQ_Q 'ccb_ptr' to point to the * physical CCB structure. */ scsiqp->ccb_ptr = ccb->hashkey; /* * Build the ADW_SCSI_REQ_Q request. */ /* * Set CDB length and copy it to the request structure. * For wide boards a CDB length maximum of 16 bytes * is supported. */ bcopy(xs->cmd, &scsiqp->cdb, ((scsiqp->cdb_len = xs->cmdlen) <= 12)? xs->cmdlen : 12 ); if(xs->cmdlen > 12) bcopy(&(xs->cmd[12]), &scsiqp->cdb16, xs->cmdlen - 12); scsiqp->target_id = sc_link->target; scsiqp->target_lun = sc_link->lun; scsiqp->vsense_addr = &ccb->scsi_sense; scsiqp->sense_addr = sc->sc_dmamap_control->dm_segs[0].ds_addr + ADW_CCB_OFF(ccb) + offsetof(struct adw_ccb, scsi_sense); scsiqp->sense_len = sizeof(struct scsi_sense_data); /* * Build ADW_SCSI_REQ_Q for a scatter-gather buffer command. */ if (xs->datalen) { /* * Map the DMA transfer. */ #ifdef TFS if (xs->flags & SCSI_DATA_UIO) { error = bus_dmamap_load_uio(dmat, ccb->dmamap_xfer, (struct uio *) xs->data, (flags & SCSI_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK); } else #endif /* TFS */ { error = bus_dmamap_load(dmat, ccb->dmamap_xfer, xs->data, xs->datalen, NULL, (flags & SCSI_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK); } if (error) { if (error == EFBIG) { printf("%s: adw_scsi_cmd, more than %d dma" " segments\n", sc->sc_dev.dv_xname, ADW_MAX_SG_LIST); } else { printf("%s: adw_scsi_cmd, error %d loading" " dma map\n", sc->sc_dev.dv_xname, error); } xs->error = XS_DRIVER_STUFFUP; adw_free_ccb(sc, ccb); return (0); } bus_dmamap_sync(dmat, ccb->dmamap_xfer, (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); /* * Build scatter-gather list. */ scsiqp->data_cnt = xs->datalen; scsiqp->vdata_addr = xs->data; scsiqp->data_addr = ccb->dmamap_xfer->dm_segs[0].ds_addr; bzero(ccb->sg_block, sizeof(ADW_SG_BLOCK) * ADW_NUM_SG_BLOCK); adw_build_sglist(ccb, scsiqp, ccb->sg_block); } else { /* * No data xfer, use non S/G values. */ scsiqp->data_cnt = 0; scsiqp->vdata_addr = 0; scsiqp->data_addr = 0; } return (1); } /* * Build scatter-gather list for Wide Boards. */ void adw_build_sglist(ccb, scsiqp, sg_block) ADW_CCB *ccb; ADW_SCSI_REQ_Q *scsiqp; ADW_SG_BLOCK *sg_block; { u_long sg_block_next_addr; /* block and its next */ u_int32_t sg_block_physical_addr; int i; /* how many SG entries */ bus_dma_segment_t *sg_list = &ccb->dmamap_xfer->dm_segs[0]; int sg_elem_cnt = ccb->dmamap_xfer->dm_nsegs; sg_block_next_addr = (u_long) sg_block; /* allow math operation */ sg_block_physical_addr = ccb->hashkey + offsetof(struct adw_ccb, sg_block[0]); scsiqp->sg_real_addr = sg_block_physical_addr; /* * If there are more than NO_OF_SG_PER_BLOCK dma segments (hw sg-list) * then split the request into multiple sg-list blocks. */ do { for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) { sg_block->sg_list[i].sg_addr = sg_list->ds_addr; sg_block->sg_list[i].sg_count = sg_list->ds_len; if (--sg_elem_cnt == 0) { /* last entry, get out */ sg_block->sg_cnt = i + 1; sg_block->sg_ptr = NULL; /* next link = NULL */ return; } sg_list++; } sg_block_next_addr += sizeof(ADW_SG_BLOCK); sg_block_physical_addr += sizeof(ADW_SG_BLOCK); sg_block->sg_cnt = NO_OF_SG_PER_BLOCK; sg_block->sg_ptr = sg_block_physical_addr; sg_block = (ADW_SG_BLOCK *) sg_block_next_addr; /* virt. addr */ } while (1); } /******************************************************************************/ /* Interrupts and TimeOut routines */ /******************************************************************************/ int adw_intr(arg) void *arg; { ADW_SOFTC *sc = arg; struct scsi_xfer *xs; if(AdwISR(sc) != ADW_FALSE) { /* * If there are queue entries in the software queue, try to * run the first one. We should be more or less guaranteed * to succeed, since we just freed a CCB. * * NOTE: adw_scsi_cmd() relies on our calling it with * the first entry in the queue. */ if ((xs = sc->sc_queue.lh_first) != NULL) (void) adw_scsi_cmd(xs); return (1); } return (0); } /* * Poll a particular unit, looking for a particular xs */ int adw_poll(sc, xs, count) ADW_SOFTC *sc; struct scsi_xfer *xs; int count; { /* timeouts are in msec, so we loop in 1000 usec cycles */ while (count > 0) { adw_intr(sc); if (xs->flags & ITSDONE) { if ((xs->cmd->opcode == INQUIRY) && (xs->sc_link->lun == 0) && (xs->error == XS_NOERROR)) adw_print_info(sc, xs->sc_link->target); return (0); } delay(1000); /* only happens in boot so ok */ count--; } return (1); } void adw_timeout(arg) void *arg; { ADW_CCB *ccb = arg; struct scsi_xfer *xs = ccb->xs; struct scsi_link *sc_link = xs->sc_link; ADW_SOFTC *sc = sc_link->adapter_softc; int s; sc_print_addr(sc_link); printf("timed out"); s = splbio(); if (ccb->flags & CCB_ABORTED) { /* * Abort Timed Out * * No more opportunities. Lets try resetting the bus and * reinitialize the host adapter. */ timeout_del(&xs->stimeout); printf(" AGAIN. Resetting SCSI Bus\n"); adw_reset_bus(sc); splx(s); return; } else if (ccb->flags & CCB_ABORTING) { /* * Abort the operation that has timed out. * * Second opportunity. */ printf("\n"); xs->error = XS_TIMEOUT; ccb->flags |= CCB_ABORTED; #if 0 /* * - XXX - 3.3a microcode is BROKEN!!! * * We cannot abort a CCB, so we can only hope the command * get completed before the next timeout, otherwise a * Bus Reset will arrive inexorably. */ /* * ADW_ABORT_CCB() makes the board to generate an interrupt * * - XXX - The above assertion MUST be verified (and this * code changed as well [callout_*()]), when the * ADW_ABORT_CCB will be working again */ ADW_ABORT_CCB(sc, ccb); #endif /* * waiting for multishot callout_reset() let's restart it * by hand so the next time a timeout event will occour * we will reset the bus. */ timeout_add(&xs->stimeout, (ccb->timeout * hz) / 1000); } else { /* * Abort the operation that has timed out. * * First opportunity. */ printf("\n"); xs->error = XS_TIMEOUT; ccb->flags |= CCB_ABORTING; #if 0 /* * - XXX - 3.3a microcode is BROKEN!!! * * We cannot abort a CCB, so we can only hope the command * get completed before the next 2 timeout, otherwise a * Bus Reset will arrive inexorably. */ /* * ADW_ABORT_CCB() makes the board to generate an interrupt * * - XXX - The above assertion MUST be verified (and this * code changed as well [callout_*()]), when the * ADW_ABORT_CCB will be working again */ ADW_ABORT_CCB(sc, ccb); #endif /* * waiting for multishot callout_reset() let's restart it * by hand so to give a second opportunity to the command * which timed-out. */ timeout_add(&xs->stimeout, (ccb->timeout * hz) / 1000); } splx(s); } void adw_reset_bus(sc) ADW_SOFTC *sc; { ADW_CCB *ccb; int s; s = splbio(); AdwResetSCSIBus(sc); /* XXX - should check return value? */ while((ccb = TAILQ_LAST(&sc->sc_pending_ccb, adw_pending_ccb)) != NULL) { timeout_del(&ccb->xs->stimeout); TAILQ_REMOVE(&sc->sc_pending_ccb, ccb, chain); TAILQ_INSERT_HEAD(&sc->sc_waiting_ccb, ccb, chain); } bzero(sc->sc_freeze_dev, sizeof(sc->sc_freeze_dev)); adw_queue_ccb(sc, TAILQ_FIRST(&sc->sc_waiting_ccb), 1); splx(s); } /******************************************************************************/ /* Host Adapter and Peripherals Information Routines */ /******************************************************************************/ void adw_print_info(sc, tid) ADW_SOFTC *sc; int tid; { bus_space_handle_t ioh = sc->sc_ioh; bus_space_tag_t iot = sc->sc_iot; u_int16_t hshk_cfg, able_mask, period = 0; /* hshk/HSHK means 'handskake' */ ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_DEVICE_HSHK_CFG_TABLE + (2 * tid), hshk_cfg); ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE, able_mask); if ((able_mask & ADW_TID_TO_TIDMASK(tid)) == 0) hshk_cfg &= ~HSHK_CFG_WIDE_XFR; ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE, able_mask); if ((able_mask & ADW_TID_TO_TIDMASK(tid)) == 0) hshk_cfg &= ~HSHK_CFG_OFFSET; printf("%s: target %d using %d bit ", sc->sc_dev.dv_xname, tid, (hshk_cfg & HSHK_CFG_WIDE_XFR) ? 16 : 8); if ((hshk_cfg & HSHK_CFG_OFFSET) == 0) printf("async "); else { period = (hshk_cfg & 0x1f00) >> 8; switch (period) { case 0x11: printf("80.0 "); break; case 0x10: printf("40.0 "); break; default: period = (period * 25) + 50; printf("%d.%d ", 1000/period, ADW_TENTHS(1000, period)); break; } printf("MHz %d REQ/ACK offset ", hshk_cfg & HSHK_CFG_OFFSET); } printf("xfers\n"); } /******************************************************************************/ /* WIDE boards Interrupt callbacks */ /******************************************************************************/ /* * adw_isr_callback() - Second Level Interrupt Handler called by AdwISR() * * Interrupt callback function for the Wide SCSI Adw Library. * * Notice: * Interrupts are disabled by the caller (AdwISR() function), and will be * enabled at the end of the caller. */ void adw_isr_callback(sc, scsiq) ADW_SOFTC *sc; ADW_SCSI_REQ_Q *scsiq; { bus_dma_tag_t dmat; ADW_CCB *ccb; struct scsi_xfer *xs; struct scsi_sense_data *s1, *s2; ccb = adw_ccb_phys_kv(sc, scsiq->ccb_ptr); TAILQ_REMOVE(&sc->sc_pending_ccb, ccb, chain); if ((ccb->flags & CCB_ALLOC) == 0) { printf("%s: unallocated ccb found on pending list!\n", sc->sc_dev.dv_xname); Debugger(); adw_free_ccb(sc, ccb); return; } xs = ccb->xs; timeout_del(&xs->stimeout); /* * If we were a data transfer, unload the map that described * the data buffer. */ dmat = sc->sc_dmat; if (xs->datalen) { bus_dmamap_sync(dmat, ccb->dmamap_xfer, (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(dmat, ccb->dmamap_xfer); } /* * 'done_status' contains the command's ending status. * 'host_status' conatins the host adapter status. * 'scsi_status' contains the scsi peripheral status. */ sc->sc_freeze_dev[scsiq->target_id] = 0; xs->status = scsiq->scsi_status; switch (scsiq->done_status) { case QD_NO_ERROR: /* (scsi_status == 0) && (host_status == 0) */ NO_ERROR: xs->resid = scsiq->data_cnt; xs->error = XS_NOERROR; break; case QD_WITH_ERROR: switch (scsiq->host_status) { case QHSTA_NO_ERROR: switch (scsiq->scsi_status) { case SCSI_STATUS_CONDITION_MET: case SCSI_STATUS_INTERMID: case SCSI_STATUS_INTERMID_COND_MET: /* * These non-zero status values are * not really error conditions. * * XXX - would it be too paranoid to * add SCSI_STATUS_GOOD here in * case the docs are wrong re * QD_NO_ERROR? */ goto NO_ERROR; case SCSI_STATUS_CHECK_CONDITION: case SCSI_STATUS_CMD_TERMINATED: case SCSI_STATUS_ACA_ACTIVE: s1 = &ccb->scsi_sense; s2 = &xs->sense; *s2 = *s1; xs->error = XS_SENSE; break; case SCSI_STATUS_TARGET_BUSY: case SCSI_STATUS_QUEUE_FULL: case SCSI_STATUS_RSERV_CONFLICT: sc->sc_freeze_dev[scsiq->target_id] = 1; xs->error = XS_BUSY; break; default: /* scsiq->scsi_status value */ printf("%s: bad scsi_status: 0x%02x.\n" ,sc->sc_dev.dv_xname ,scsiq->scsi_status); xs->error = XS_DRIVER_STUFFUP; break; } break; case QHSTA_M_SEL_TIMEOUT: xs->error = XS_SELTIMEOUT; break; case QHSTA_M_DIRECTION_ERR: case QHSTA_M_SXFR_OFF_UFLW: case QHSTA_M_SXFR_OFF_OFLW: case QHSTA_M_SXFR_XFR_OFLW: case QHSTA_M_QUEUE_ABORTED: case QHSTA_M_INVALID_DEVICE: case QHSTA_M_SGBACKUP_ERROR: case QHSTA_M_SXFR_DESELECTED: case QHSTA_M_SXFR_XFR_PH_ERR: case QHSTA_M_BUS_DEVICE_RESET: case QHSTA_M_NO_AUTO_REQ_SENSE: case QHSTA_M_BAD_CMPL_STATUS_IN: case QHSTA_M_SXFR_UNKNOWN_ERROR: case QHSTA_M_AUTO_REQ_SENSE_FAIL: case QHSTA_M_UNEXPECTED_BUS_FREE: printf("%s: host adapter error 0x%02x." " See adw(4).\n" ,sc->sc_dev.dv_xname, scsiq->host_status); xs->error = XS_DRIVER_STUFFUP; break; case QHSTA_M_RDMA_PERR: case QHSTA_M_SXFR_WD_TMO: case QHSTA_M_WTM_TIMEOUT: case QHSTA_M_FROZEN_TIDQ: case QHSTA_M_SXFR_SDMA_ERR: case QHSTA_M_SXFR_SXFR_PERR: case QHSTA_M_SCSI_BUS_RESET: case QHSTA_M_DIRECTION_ERR_HUNG: case QHSTA_M_SCSI_BUS_RESET_UNSOL: /* * XXX - are all these cases really asking * for a card reset? _BUS_RESET and * _BUS_RESET_UNSOL added just to make * sure the pending queue is cleared out * in case card has lost track of them. */ printf("%s: host adapter error 0x%02x," " resetting bus. See adw(4).\n" ,sc->sc_dev.dv_xname, scsiq->host_status); adw_reset_bus(sc); xs->error = XS_RESET; break; default: /* scsiq->host_status value */ /* * XXX - is a panic really appropriate here? If * not, would it be better to make the * XS_DRIVER_STUFFUP case above the * default behaviour? Or XS_RESET? */ panic("%s: bad host_status: 0x%02x" ,sc->sc_dev.dv_xname, scsiq->host_status); break; } break; case QD_ABORTED_BY_HOST: xs->error = XS_DRIVER_STUFFUP; break; default: /* scsiq->done_status value */ /* * XXX - would QD_NO_STATUS really mean the I/O is not * done? and would that mean it should somehow be * put back as a pending I/O? */ printf("%s: bad done_status: 0x%02x" " (host_status: 0x%02x, scsi_status: 0x%02x)\n" ,sc->sc_dev.dv_xname ,scsiq->done_status ,scsiq->host_status ,scsiq->scsi_status); xs->error = XS_DRIVER_STUFFUP; break; } adw_free_ccb(sc, ccb); xs->flags |= ITSDONE; scsi_done(xs); } /* * adw_async_callback() - Adw Library asynchronous event callback function. */ void adw_async_callback(sc, code) ADW_SOFTC *sc; u_int8_t code; { switch (code) { case ADW_ASYNC_SCSI_BUS_RESET_DET: /* The firmware detected a SCSI Bus reset. */ printf("%s: SCSI Bus reset detected\n", sc->sc_dev.dv_xname); break; case ADW_ASYNC_RDMA_FAILURE: /* * Handle RDMA failure by resetting the SCSI Bus and * possibly the chip if it is unresponsive. */ printf("%s: RDMA failure. Resetting the SCSI Bus and" " the adapter\n", sc->sc_dev.dv_xname); adw_reset_bus(sc); break; case ADW_HOST_SCSI_BUS_RESET: /* Host generated SCSI bus reset occurred. */ printf("%s: Host generated SCSI bus reset occurred\n", sc->sc_dev.dv_xname); break; case ADW_ASYNC_CARRIER_READY_FAILURE: /* * Carrier Ready failure. * * A warning only - RISC too busy to realize it's been * tickled. Occurs in normal operation under heavy * load, so a message is printed only when ADW_DEBUG'ing */ #ifdef ADW_DEBUG printf("%s: Carrier Ready failure!\n", sc->sc_dev.dv_xname); #endif break; default: printf("%s: Unknown Async callback code (ignored): 0x%02x\n" ,sc->sc_dev.dv_xname ); break; } }