/* $OpenBSD: ahcireg.h,v 1.1 2013/01/21 11:17:48 patrick Exp $ */ /* * Copyright (c) 2006 David Gwynne * Copyright (c) 2010 Conformal Systems LLC * Copyright (c) 2010 Jonathan Matthew * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #define AHCI_REG_CAP 0x000 /* HBA Capabilities */ #define AHCI_REG_CAP_NP(_r) (((_r) & 0x1f)+1) /* Number of Ports */ #define AHCI_REG_CAP_SXS (1<<5) /* External SATA */ #define AHCI_REG_CAP_EMS (1<<6) /* Enclosure Mgmt */ #define AHCI_REG_CAP_CCCS (1<<7) /* Cmd Coalescing */ #define AHCI_REG_CAP_NCS(_r) ((((_r) & 0x1f00)>>8)+1) /* NCmds*/ #define AHCI_REG_CAP_PSC (1<<13) /* Partial State Capable */ #define AHCI_REG_CAP_SSC (1<<14) /* Slumber State Capable */ #define AHCI_REG_CAP_PMD (1<<15) /* PIO Multiple DRQ Block */ #define AHCI_REG_CAP_FBSS (1<<16) /* FIS-Based Switching */ #define AHCI_REG_CAP_SPM (1<<17) /* Port Multiplier */ #define AHCI_REG_CAP_SAM (1<<18) /* AHCI Only mode */ #define AHCI_REG_CAP_SNZO (1<<19) /* Non Zero DMA Offsets */ #define AHCI_REG_CAP_ISS (0xf<<20) /* Interface Speed Support */ #define AHCI_REG_CAP_ISS_G1 (0x1<<20) /* Gen 1 (1.5 Gbps) */ #define AHCI_REG_CAP_ISS_G1_2 (0x2<<20) /* Gen 1 and 2 (3 Gbps) */ #define AHCI_REG_CAP_SCLO (1<<24) /* Cmd List Override */ #define AHCI_REG_CAP_SAL (1<<25) /* Activity LED */ #define AHCI_REG_CAP_SALP (1<<26) /* Aggressive Link Pwr Mgmt */ #define AHCI_REG_CAP_SSS (1<<27) /* Staggered Spinup */ #define AHCI_REG_CAP_SMPS (1<<28) /* Mech Presence Switch */ #define AHCI_REG_CAP_SSNTF (1<<29) /* SNotification Register */ #define AHCI_REG_CAP_SNCQ (1<<30) /* Native Cmd Queuing */ #define AHCI_REG_CAP_S64A (1<<31) /* 64bit Addressing */ #define AHCI_FMT_CAP "\020" "\040S64A" "\037NCQ" "\036SSNTF" \ "\035SMPS" "\034SSS" "\033SALP" "\032SAL" \ "\031SCLO" "\024SNZO" "\023SAM" "\022SPM" \ "\021FBSS" "\020PMD" "\017SSC" "\016PSC" \ "\010CCCS" "\007EMS" "\006SXS" #define AHCI_REG_GHC 0x004 /* Global HBA Control */ #define AHCI_REG_GHC_HR (1<<0) /* HBA Reset */ #define AHCI_REG_GHC_IE (1<<1) /* Interrupt Enable */ #define AHCI_REG_GHC_MRSM (1<<2) /* MSI Revert to Single Msg */ #define AHCI_REG_GHC_AE (1<<31) /* AHCI Enable */ #define AHCI_FMT_GHC "\020" "\040AE" "\003MRSM" "\002IE" "\001HR" #define AHCI_REG_IS 0x008 /* Interrupt Status */ #define AHCI_REG_PI 0x00c /* Ports Implemented */ #define AHCI_REG_VS 0x010 /* AHCI Version */ #define AHCI_REG_VS_0_95 0x00000905 /* 0.95 */ #define AHCI_REG_VS_1_0 0x00010000 /* 1.0 */ #define AHCI_REG_VS_1_1 0x00010100 /* 1.1 */ #define AHCI_REG_VS_1_2 0x00010200 /* 1.2 */ #define AHCI_REG_VS_1_3 0x00010300 /* 1.3 */ #define AHCI_REG_CCC_CTL 0x014 /* Coalescing Control */ #define AHCI_REG_CCC_CTL_INT(_r) (((_r) & 0xf8) >> 3) /* CCC INT slot */ #define AHCI_REG_CCC_PORTS 0x018 /* Coalescing Ports */ #define AHCI_REG_EM_LOC 0x01c /* Enclosure Mgmt Location */ #define AHCI_REG_EM_CTL 0x020 /* Enclosure Mgmt Control */ #define AHCI_PORT_REGION(_p) (0x100 + ((_p) * 0x80)) #define AHCI_PORT_SIZE 0x80 #define AHCI_PREG_CLB 0x00 /* Cmd List Base Addr */ #define AHCI_PREG_CLBU 0x04 /* Cmd List Base Hi Addr */ #define AHCI_PREG_FB 0x08 /* FIS Base Addr */ #define AHCI_PREG_FBU 0x0c /* FIS Base Hi Addr */ #define AHCI_PREG_IS 0x10 /* Interrupt Status */ #define AHCI_PREG_IS_DHRS (1<<0) /* Device to Host FIS */ #define AHCI_PREG_IS_PSS (1<<1) /* PIO Setup FIS */ #define AHCI_PREG_IS_DSS (1<<2) /* DMA Setup FIS */ #define AHCI_PREG_IS_SDBS (1<<3) /* Set Device Bits FIS */ #define AHCI_PREG_IS_UFS (1<<4) /* Unknown FIS */ #define AHCI_PREG_IS_DPS (1<<5) /* Descriptor Processed */ #define AHCI_PREG_IS_PCS (1<<6) /* Port Change */ #define AHCI_PREG_IS_DMPS (1<<7) /* Device Mechanical Presence */ #define AHCI_PREG_IS_PRCS (1<<22) /* PhyRdy Change */ #define AHCI_PREG_IS_IPMS (1<<23) /* Incorrect Port Multiplier */ #define AHCI_PREG_IS_OFS (1<<24) /* Overflow */ #define AHCI_PREG_IS_INFS (1<<26) /* Interface Non-fatal Error */ #define AHCI_PREG_IS_IFS (1<<27) /* Interface Fatal Error */ #define AHCI_PREG_IS_HBDS (1<<28) /* Host Bus Data Error */ #define AHCI_PREG_IS_HBFS (1<<29) /* Host Bus Fatal Error */ #define AHCI_PREG_IS_TFES (1<<30) /* Task File Error */ #define AHCI_PREG_IS_CPDS (1<<31) /* Cold Presence Detect */ #define AHCI_PFMT_IS "\20" "\040CPDS" "\037TFES" "\036HBFS" \ "\035HBDS" "\034IFS" "\033INFS" "\031OFS" \ "\030IPMS" "\027PRCS" "\010DMPS" "\006DPS" \ "\007PCS" "\005UFS" "\004SDBS" "\003DSS" \ "\002PSS" "\001DHRS" #define AHCI_PREG_IE 0x14 /* Interrupt Enable */ #define AHCI_PREG_IE_DHRE (1<<0) /* Device to Host FIS */ #define AHCI_PREG_IE_PSE (1<<1) /* PIO Setup FIS */ #define AHCI_PREG_IE_DSE (1<<2) /* DMA Setup FIS */ #define AHCI_PREG_IE_SDBE (1<<3) /* Set Device Bits FIS */ #define AHCI_PREG_IE_UFE (1<<4) /* Unknown FIS */ #define AHCI_PREG_IE_DPE (1<<5) /* Descriptor Processed */ #define AHCI_PREG_IE_PCE (1<<6) /* Port Change */ #define AHCI_PREG_IE_DMPE (1<<7) /* Device Mechanical Presence */ #define AHCI_PREG_IE_PRCE (1<<22) /* PhyRdy Change */ #define AHCI_PREG_IE_IPME (1<<23) /* Incorrect Port Multiplier */ #define AHCI_PREG_IE_OFE (1<<24) /* Overflow */ #define AHCI_PREG_IE_INFE (1<<26) /* Interface Non-fatal Error */ #define AHCI_PREG_IE_IFE (1<<27) /* Interface Fatal Error */ #define AHCI_PREG_IE_HBDE (1<<28) /* Host Bus Data Error */ #define AHCI_PREG_IE_HBFE (1<<29) /* Host Bus Fatal Error */ #define AHCI_PREG_IE_TFEE (1<<30) /* Task File Error */ #define AHCI_PREG_IE_CPDE (1<<31) /* Cold Presence Detect */ #define AHCI_PFMT_IE "\20" "\040CPDE" "\037TFEE" "\036HBFE" \ "\035HBDE" "\034IFE" "\033INFE" "\031OFE" \ "\030IPME" "\027PRCE" "\010DMPE" "\007PCE" \ "\006DPE" "\005UFE" "\004SDBE" "\003DSE" \ "\002PSE" "\001DHRE" #define AHCI_PREG_CMD 0x18 /* Command and Status */ #define AHCI_PREG_CMD_ST (1<<0) /* Start */ #define AHCI_PREG_CMD_SUD (1<<1) /* Spin Up Device */ #define AHCI_PREG_CMD_POD (1<<2) /* Power On Device */ #define AHCI_PREG_CMD_CLO (1<<3) /* Command List Override */ #define AHCI_PREG_CMD_FRE (1<<4) /* FIS Receive Enable */ #define AHCI_PREG_CMD_CCS(_r) (((_r) >> 8) & 0x1f) /* Curr CmdSlot# */ #define AHCI_PREG_CMD_MPSS (1<<13) /* Mech Presence State */ #define AHCI_PREG_CMD_FR (1<<14) /* FIS Receive Running */ #define AHCI_PREG_CMD_CR (1<<15) /* Command List Running */ #define AHCI_PREG_CMD_CPS (1<<16) /* Cold Presence State */ #define AHCI_PREG_CMD_PMA (1<<17) /* Port Multiplier Attached */ #define AHCI_PREG_CMD_HPCP (1<<18) /* Hot Plug Capable */ #define AHCI_PREG_CMD_MPSP (1<<19) /* Mech Presence Switch */ #define AHCI_PREG_CMD_CPD (1<<20) /* Cold Presence Detection */ #define AHCI_PREG_CMD_ESP (1<<21) /* External SATA Port */ #define AHCI_PREG_CMD_ATAPI (1<<24) /* Device is ATAPI */ #define AHCI_PREG_CMD_DLAE (1<<25) /* Drv LED on ATAPI Enable */ #define AHCI_PREG_CMD_ALPE (1<<26) /* Aggro Pwr Mgmt Enable */ #define AHCI_PREG_CMD_ASP (1<<27) /* Aggro Slumber/Partial */ #define AHCI_PREG_CMD_ICC 0xf0000000 /* Interface Comm Ctrl */ #define AHCI_PREG_CMD_ICC_SLUMBER 0x60000000 #define AHCI_PREG_CMD_ICC_PARTIAL 0x20000000 #define AHCI_PREG_CMD_ICC_ACTIVE 0x10000000 #define AHCI_PREG_CMD_ICC_IDLE 0x00000000 #define AHCI_PFMT_CMD "\020" "\034ASP" "\033ALPE" "\032DLAE" \ "\031ATAPI" "\026ESP" "\025CPD" "\024MPSP" \ "\023HPCP" "\022PMA" "\021CPS" "\020CR" \ "\017FR" "\016MPSS" "\005FRE" "\004CLO" \ "\003POD" "\002SUD" "\001ST" #define AHCI_PREG_TFD 0x20 /* Task File Data*/ #define AHCI_PREG_TFD_STS 0xff #define AHCI_PREG_TFD_STS_ERR (1<<0) #define AHCI_PREG_TFD_STS_DRQ (1<<3) #define AHCI_PREG_TFD_STS_BSY (1<<7) #define AHCI_PREG_TFD_ERR 0xff00 #define AHCI_PFMT_TFD_STS "\20" "\010BSY" "\004DRQ" "\001ERR" #define AHCI_PREG_SIG 0x24 /* Signature */ #define AHCI_PREG_SSTS 0x28 /* SATA Status */ #define AHCI_PREG_SSTS_DET 0xf /* Device Detection */ #define AHCI_PREG_SSTS_DET_NONE 0x0 #define AHCI_PREG_SSTS_DET_DEV_NE 0x1 #define AHCI_PREG_SSTS_DET_DEV 0x3 #define AHCI_PREG_SSTS_DET_PHYOFFLINE 0x4 #define AHCI_PREG_SSTS_SPD 0xf0 /* Current Interface Speed */ #define AHCI_PREG_SSTS_SPD_NONE 0x00 #define AHCI_PREG_SSTS_SPD_GEN1 0x10 #define AHCI_PREG_SSTS_SPD_GEN2 0x20 #define AHCI_PREG_SSTS_IPM 0xf00 /* Interface Power Management */ #define AHCI_PREG_SSTS_IPM_NONE 0x000 #define AHCI_PREG_SSTS_IPM_ACTIVE 0x100 #define AHCI_PREG_SSTS_IPM_PARTIAL 0x200 #define AHCI_PREG_SSTS_IPM_SLUMBER 0x600 #define AHCI_PREG_SCTL 0x2c /* SATA Control */ #define AHCI_PREG_SCTL_DET 0xf /* Device Detection */ #define AHCI_PREG_SCTL_DET_NONE 0x0 #define AHCI_PREG_SCTL_DET_INIT 0x1 #define AHCI_PREG_SCTL_DET_DISABLE 0x4 #define AHCI_PREG_SCTL_SPD 0xf0 /* Speed Allowed */ #define AHCI_PREG_SCTL_SPD_ANY 0x00 #define AHCI_PREG_SCTL_SPD_GEN1 0x10 #define AHCI_PREG_SCTL_SPD_GEN2 0x20 #define AHCI_PREG_SCTL_IPM 0xf00 /* Interface Power Management */ #define AHCI_PREG_SCTL_IPM_NONE 0x000 #define AHCI_PREG_SCTL_IPM_NOPARTIAL 0x100 #define AHCI_PREG_SCTL_IPM_NOSLUMBER 0x200 #define AHCI_PREG_SCTL_IPM_DISABLED 0x300 #define AHCI_PREG_SERR 0x30 /* SATA Error */ #define AHCI_PREG_SERR_ERR(_r) ((_r) & 0xffff) #define AHCI_PREG_SERR_ERR_I (1<<0) /* Recovered Data Integrity */ #define AHCI_PREG_SERR_ERR_M (1<<1) /* Recovered Communications */ #define AHCI_PREG_SERR_ERR_T (1<<8) /* Transient Data Integrity */ #define AHCI_PREG_SERR_ERR_C (1<<9) /* Persistent Comm/Data */ #define AHCI_PREG_SERR_ERR_P (1<<10) /* Protocol */ #define AHCI_PREG_SERR_ERR_E (1<<11) /* Internal */ #define AHCI_PFMT_SERR_ERR "\020" "\014E" "\013P" "\012C" "\011T" "\002M" \ "\001I" #define AHCI_PREG_SERR_DIAG(_r) (((_r) >> 16) & 0xffff) #define AHCI_PREG_SERR_DIAG_N (1<<0) /* PhyRdy Change */ #define AHCI_PREG_SERR_DIAG_I (1<<1) /* Phy Internal Error */ #define AHCI_PREG_SERR_DIAG_W (1<<2) /* Comm Wake */ #define AHCI_PREG_SERR_DIAG_B (1<<3) /* 10B to 8B Decode Error */ #define AHCI_PREG_SERR_DIAG_D (1<<4) /* Disparity Error */ #define AHCI_PREG_SERR_DIAG_C (1<<5) /* CRC Error */ #define AHCI_PREG_SERR_DIAG_H (1<<6) /* Handshake Error */ #define AHCI_PREG_SERR_DIAG_S (1<<7) /* Link Sequence Error */ #define AHCI_PREG_SERR_DIAG_T (1<<8) /* Transport State Trans Err */ #define AHCI_PREG_SERR_DIAG_F (1<<9) /* Unknown FIS Type */ #define AHCI_PREG_SERR_DIAG_X (1<<10) /* Exchanged */ #define AHCI_PFMT_SERR_DIAG "\020" "\013X" "\012F" "\011T" "\010S" "\007H" \ "\006C" "\005D" "\004B" "\003W" "\002I" \ "\001N" #define AHCI_PREG_SACT 0x34 /* SATA Active */ #define AHCI_PREG_CI 0x38 /* Command Issue */ #define AHCI_PREG_CI_ALL_SLOTS 0xffffffff #define AHCI_PREG_SNTF 0x3c /* SNotification */ #define AHCI_PREG_FBS 0x40 /* FIS-based Switching Control */ #define AHCI_PREG_FBS_DWE 0xf0000 /* Device With Error */ #define AHCI_PREG_FBS_ADO 0xf000 /* Active Device Optimization */ #define AHCI_PREG_FBS_DEV 0xf00 /* Device To Issue */ #define AHCI_PREG_FBS_SDE (1<<2) /* Single Device Error */ #define AHCI_PREG_FBS_DEC (1<<1) /* Device Error Clear */ #define AHCI_PREG_FBS_EN (1<<0) /* Enable */