/* $OpenBSD: aic7xxx_inline.h,v 1.15 2012/05/12 21:56:30 miod Exp $ */ /* $NetBSD: aic7xxx_inline.h,v 1.4 2003/11/02 11:07:44 wiz Exp $ */ /* * Inline routines shareable across OS platforms. * * Copyright (c) 1994-2001 Justin T. Gibbs. * Copyright (c) 2000-2001 Adaptec Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * //depot/aic7xxx/aic7xxx/aic7xxx_inline.h#39 $ * * $FreeBSD: /repoman/r/ncvs/src/sys/dev/aic7xxx/aic7xxx_inline.h,v 1.20 2003/01/20 20:44:55 gibbs Exp $ */ /* * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003 */ #ifndef _AIC7XXX_INLINE_H_ #define _AIC7XXX_INLINE_H_ #ifdef SMALL_KERNEL #define IO_INLINE #else #define IO_INLINE static __inline #define IO_EXPAND #endif /************************* Sequencer Execution Control ************************/ IO_INLINE void ahc_pause_bug_fix(struct ahc_softc *ahc); IO_INLINE int ahc_is_paused(struct ahc_softc *ahc); IO_INLINE void ahc_pause(struct ahc_softc *ahc); IO_INLINE void ahc_unpause(struct ahc_softc *ahc); #ifdef IO_EXPAND /* * Work around any chip bugs related to halting sequencer execution. * On Ultra2 controllers, we must clear the CIOBUS stretch signal by * reading a register that will set this signal and deassert it. * Without this workaround, if the chip is paused, by an interrupt or * manual pause while accessing scb ram, accesses to certain registers * will hang the system (infinite pci retries). */ IO_INLINE void ahc_pause_bug_fix(struct ahc_softc *ahc) { if ((ahc->features & AHC_ULTRA2) != 0) (void)ahc_inb(ahc, CCSCBCTL); } /* * Determine whether the sequencer has halted code execution. * Returns non-zero status if the sequencer is stopped. */ IO_INLINE int ahc_is_paused(struct ahc_softc *ahc) { return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0); } /* * Request that the sequencer stop and wait, indefinitely, for it * to stop. The sequencer will only acknowledge that it is paused * once it has reached an instruction boundary and PAUSEDIS is * cleared in the SEQCTL register. The sequencer may use PAUSEDIS * for critical sections. */ IO_INLINE void ahc_pause(struct ahc_softc *ahc) { ahc_outb(ahc, HCNTRL, ahc->pause); /* * Since the sequencer can disable pausing in a critical section, we * must loop until it actually stops. */ while (ahc_is_paused(ahc) == 0) ; ahc_pause_bug_fix(ahc); } /* * Allow the sequencer to continue program execution. * We check here to ensure that no additional interrupt * sources that would cause the sequencer to halt have been * asserted. If, for example, a SCSI bus reset is detected * while we are fielding a different, pausing, interrupt type, * we don't want to release the sequencer before going back * into our interrupt handler and dealing with this new * condition. */ IO_INLINE void ahc_unpause(struct ahc_softc *ahc) { if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0) ahc_outb(ahc, HCNTRL, ahc->unpause); } #endif /* IO_EXPAND */ /*********************** Untagged Transaction Routines ************************/ IO_INLINE void ahc_freeze_untagged_queues(struct ahc_softc *ahc); IO_INLINE void ahc_release_untagged_queues(struct ahc_softc *ahc); #ifdef IO_EXPAND /* * Block our completion routine from starting the next untagged * transaction for this target or target lun. */ IO_INLINE void ahc_freeze_untagged_queues(struct ahc_softc *ahc) { if ((ahc->flags & AHC_SCB_BTT) == 0) ahc->untagged_queue_lock++; } /* * Allow the next untagged transaction for this target or target lun * to be executed. We use a counting semaphore to allow the lock * to be acquired recursively. Once the count drops to zero, the * transaction queues will be run. */ IO_INLINE void ahc_release_untagged_queues(struct ahc_softc *ahc) { if ((ahc->flags & AHC_SCB_BTT) == 0) { ahc->untagged_queue_lock--; if (ahc->untagged_queue_lock == 0) ahc_run_untagged_queues(ahc); } } #endif /* IO_EXPAND */ /************************** Memory mapping routines ***************************/ IO_INLINE struct ahc_dma_seg * ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr); IO_INLINE uint32_t ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg); IO_INLINE uint32_t ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index); IO_INLINE void ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op); #ifdef AHC_TARGET_MODE IO_INLINE uint32_t ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index); #endif #ifdef IO_EXPAND IO_INLINE struct ahc_dma_seg * ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr) { int sg_index; sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg); /* sg_list_phys points to entry 1, not 0 */ sg_index++; return (&scb->sg_list[sg_index]); } IO_INLINE uint32_t ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg) { int sg_index; /* sg_list_phys points to entry 1, not 0 */ sg_index = sg - &scb->sg_list[1]; return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list))); } IO_INLINE uint32_t ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index) { return (ahc->scb_data->hscb_busaddr + (sizeof(struct hardware_scb) * index)); } IO_INLINE void ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op) { ahc_dmamap_sync(ahc, ahc->parent_dmat, ahc->scb_data->hscb_dmamap, /*offset*/(scb->hscb - ahc->scb_data->hscbs) * sizeof(*scb->hscb), /*len*/sizeof(*scb->hscb), op); } #ifdef AHC_TARGET_MODE IO_INLINE uint32_t ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index) { return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo); } #endif /* AHC_TARGET_MODE */ #endif /* IO_EXPAND */ /******************************** Debugging ***********************************/ static __inline char *ahc_name(struct ahc_softc *ahc); static __inline char * ahc_name(struct ahc_softc *ahc) { return (ahc->name); } /*********************** Miscellaneous Support Functions ***********************/ IO_INLINE void ahc_update_residual(struct ahc_softc *ahc, struct scb *scb); IO_INLINE struct ahc_initiator_tinfo * ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id, u_int remote_id, struct ahc_tmode_tstate **tstate); IO_INLINE uint16_t ahc_inw(struct ahc_softc *ahc, u_int port); IO_INLINE void ahc_outw(struct ahc_softc *ahc, u_int port, u_int value); IO_INLINE uint32_t ahc_inl(struct ahc_softc *ahc, u_int port); IO_INLINE void ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value); IO_INLINE struct scb* ahc_get_scb(struct ahc_softc *ahc); IO_INLINE void ahc_free_scb(struct ahc_softc *ahc, struct scb *scb); IO_INLINE struct scb *ahc_lookup_scb(struct ahc_softc *ahc, u_int tag); IO_INLINE void ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb); IO_INLINE void ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb); IO_INLINE struct scsi_sense_data * ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb); IO_INLINE uint32_t ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb); #ifdef IO_EXPAND /* * Determine whether the sequencer reported a residual * for this SCB/transaction. */ IO_INLINE void ahc_update_residual(struct ahc_softc *ahc, struct scb *scb) { uint32_t sgptr; sgptr = aic_le32toh(scb->hscb->sgptr); if ((sgptr & SG_RESID_VALID) != 0) ahc_calc_residual(ahc, scb); } /* * Return pointers to the transfer negotiation information * for the specified our_id/remote_id pair. */ IO_INLINE struct ahc_initiator_tinfo * ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id, u_int remote_id, struct ahc_tmode_tstate **tstate) { /* * Transfer data structures are stored from the perspective * of the target role. Since the parameters for a connection * in the initiator role to a given target are the same as * when the roles are reversed, we pretend we are the target. */ if (channel == 'B') our_id += 8; *tstate = ahc->enabled_targets[our_id]; return (&(*tstate)->transinfo[remote_id]); } IO_INLINE uint16_t ahc_inw(struct ahc_softc *ahc, u_int port) { return ((ahc_inb(ahc, port+1) << 8) | ahc_inb(ahc, port)); } IO_INLINE void ahc_outw(struct ahc_softc *ahc, u_int port, u_int value) { ahc_outb(ahc, port, value & 0xFF); ahc_outb(ahc, port+1, (value >> 8) & 0xFF); } IO_INLINE uint32_t ahc_inl(struct ahc_softc *ahc, u_int port) { return ((ahc_inb(ahc, port)) | (ahc_inb(ahc, port+1) << 8) | (ahc_inb(ahc, port+2) << 16) | (ahc_inb(ahc, port+3) << 24)); } IO_INLINE void ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value) { ahc_outb(ahc, port, (value) & 0xFF); ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF); ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF); ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF); } /* * Get a free scb. If there are none, see if we can allocate a new SCB. */ IO_INLINE struct scb * ahc_get_scb(struct ahc_softc *ahc) { struct scb *scb; scb = SLIST_FIRST(&ahc->scb_data->free_scbs); if (scb != NULL) SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle); return (scb); } /* * Return an SCB resource to the free list. */ IO_INLINE void ahc_free_scb(struct ahc_softc *ahc, struct scb *scb) { struct hardware_scb *hscb; hscb = scb->hscb; /* Clean up for the next user */ ahc->scb_data->scbindex[hscb->tag] = NULL; scb->flags = SCB_FLAG_NONE; hscb->control = 0; SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle); /* Notify the OSM that a resource is now available. */ ahc_platform_scb_free(ahc, scb); } IO_INLINE struct scb * ahc_lookup_scb(struct ahc_softc *ahc, u_int tag) { struct scb* scb; scb = ahc->scb_data->scbindex[tag]; if (scb != NULL) ahc_sync_scb(ahc, scb, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); return (scb); } IO_INLINE void ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb) { struct hardware_scb *q_hscb; u_int saved_tag; /* * Our queuing method is a bit tricky. The card * knows in advance which HSCB to download, and we * can't disappoint it. To achieve this, the next * SCB to download is saved off in ahc->next_queued_scb. * When we are called to queue "an arbitrary scb", * we copy the contents of the incoming HSCB to the one * the sequencer knows about, swap HSCB pointers and * finally assign the SCB to the tag indexed location * in the scb_array. This makes sure that we can still * locate the correct SCB by SCB_TAG. */ q_hscb = ahc->next_queued_scb->hscb; saved_tag = q_hscb->tag; memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb)); if ((scb->flags & SCB_CDB32_PTR) != 0) { q_hscb->shared_data.cdb_ptr = aic_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag) + offsetof(struct hardware_scb, cdb32)); } q_hscb->tag = saved_tag; q_hscb->next = scb->hscb->tag; /* Now swap HSCB pointers. */ ahc->next_queued_scb->hscb = scb->hscb; scb->hscb = q_hscb; /* Now define the mapping from tag to SCB in the scbindex */ ahc->scb_data->scbindex[scb->hscb->tag] = scb; } /* * Tell the sequencer about a new transaction to execute. */ IO_INLINE void ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb) { ahc_swap_with_next_hscb(ahc, scb); if (scb->hscb->tag == SCB_LIST_NULL || scb->hscb->next == SCB_LIST_NULL) panic("Attempt to queue invalid SCB tag %x:%x", scb->hscb->tag, scb->hscb->next); /* * Setup data "oddness". */ scb->hscb->lun &= LID; if (ahc_get_transfer_length(scb) & 0x1) scb->hscb->lun |= SCB_XFERLEN_ODD; /* * Keep a history of SCBs we've downloaded in the qinfifo. */ ahc->qinfifo[ahc->qinfifonext] = scb->hscb->tag; ahc_dmamap_sync(ahc, ahc->parent_dmat, ahc->shared_data_dmamap, /*offset*/ahc->qinfifonext+256, /*len*/1, BUS_DMASYNC_PREWRITE); ahc->qinfifonext++; /* * Make sure our data is consistent from the * perspective of the adapter. */ ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* Tell the adapter about the newly queued SCB */ if ((ahc->features & AHC_QUEUE_REGS) != 0) { ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); } else { if ((ahc->features & AHC_AUTOPAUSE) == 0) ahc_pause(ahc); ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); if ((ahc->features & AHC_AUTOPAUSE) == 0) ahc_unpause(ahc); } } IO_INLINE struct scsi_sense_data * ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb) { int offset; offset = scb - ahc->scb_data->scbarray; return (&ahc->scb_data->sense[offset]); } IO_INLINE uint32_t ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb) { int offset; offset = scb - ahc->scb_data->scbarray; return (ahc->scb_data->sense_busaddr + (offset * sizeof(struct scsi_sense_data))); } #endif /* IO_EXPAND */ /************************** Interrupt Processing ******************************/ IO_INLINE void ahc_sync_qoutfifo(struct ahc_softc *ahc, int op); IO_INLINE void ahc_sync_tqinfifo(struct ahc_softc *ahc, int op); IO_INLINE u_int ahc_check_cmdcmpltqueues(struct ahc_softc *ahc); IO_INLINE int ahc_intr(struct ahc_softc *ahc); #ifdef IO_EXPAND IO_INLINE void ahc_sync_qoutfifo(struct ahc_softc *ahc, int op) { ahc_dmamap_sync(ahc, ahc->parent_dmat, ahc->shared_data_dmamap, /*offset*/0, /*len*/256, op); } IO_INLINE void ahc_sync_tqinfifo(struct ahc_softc *ahc, int op) { #ifdef AHC_TARGET_MODE if ((ahc->flags & AHC_TARGETROLE) != 0) { ahc_dmamap_sync(ahc, ahc->parent_dmat /*shared_data_dmat*/, ahc->shared_data_dmamap, ahc_targetcmd_offset(ahc, 0), sizeof(struct target_cmd) * AHC_TMODE_CMDS, op); } #endif } /* * See if the firmware has posted any completed commands * into our in-core command complete fifos. */ #define AHC_RUN_QOUTFIFO 0x1 #define AHC_RUN_TQINFIFO 0x2 IO_INLINE u_int ahc_check_cmdcmpltqueues(struct ahc_softc *ahc) { u_int retval; retval = 0; ahc_dmamap_sync(ahc, ahc->parent_dmat /*shared_data_dmat*/, ahc->shared_data_dmamap, /*offset*/ahc->qoutfifonext, /*len*/1, BUS_DMASYNC_POSTREAD); if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) retval |= AHC_RUN_QOUTFIFO; #ifdef AHC_TARGET_MODE if ((ahc->flags & AHC_TARGETROLE) != 0 && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) { ahc_dmamap_sync(ahc, ahc->parent_dmat /*shared_data_dmat*/, ahc->shared_data_dmamap, ahc_targetcmd_offset(ahc, ahc->tqinfifonext), /*len*/sizeof(struct target_cmd), BUS_DMASYNC_POSTREAD); if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0) retval |= AHC_RUN_TQINFIFO; } #endif return (retval); } /* * Catch an interrupt from the adapter */ IO_INLINE int ahc_intr(struct ahc_softc *ahc) { u_int intstat; if ((ahc->pause & INTEN) == 0) { /* * Our interrupt is not enabled on the chip * and may be disabled for re-entrancy reasons, * so just return. This is likely just a shared * interrupt. */ return (0); } /* * Instead of directly reading the interrupt status register, * infer the cause of the interrupt by checking our in-core * completion queues. This avoids a costly PCI bus read in * most cases. */ if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0 && (ahc_check_cmdcmpltqueues(ahc) != 0)) intstat = CMDCMPLT; else { intstat = ahc_inb(ahc, INTSTAT); } if (intstat & CMDCMPLT) { ahc_outb(ahc, CLRINT, CLRCMDINT); /* * Ensure that the chip sees that we've cleared * this interrupt before we walk the output fifo. * Otherwise, we may, due to posted bus writes, * clear the interrupt after we finish the scan, * and after the sequencer has added new entries * and asserted the interrupt again. */ ahc_flush_device_writes(ahc); ahc_run_qoutfifo(ahc); #ifdef AHC_TARGET_MODE if ((ahc->flags & AHC_TARGETROLE) != 0) ahc_run_tqinfifo(ahc, /*paused*/FALSE); #endif } if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) /* Hot eject */ return 1; if ((intstat & INT_PEND) == 0) { #if AHC_PCI_CONFIG > 0 if (ahc->unsolicited_ints > 500) { ahc->unsolicited_ints = 0; if ((ahc->chip & AHC_PCI) != 0 && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0) ahc->bus_intr(ahc); } ahc->unsolicited_ints++; #endif return 0; } ahc->unsolicited_ints = 0; if (intstat & BRKADRINT) { ahc_handle_brkadrint(ahc); /* Fatal error, no more interrupts to handle. */ return 1; } if ((intstat & (SEQINT|SCSIINT)) != 0) ahc_pause_bug_fix(ahc); if ((intstat & SEQINT) != 0) ahc_handle_seqint(ahc, intstat); if ((intstat & SCSIINT) != 0) ahc_handle_scsiint(ahc, intstat); return (1); } #endif /* IO_EXPAND */ #endif /* _AIC7XXX_INLINE_H_ */