/* $OpenBSD: aic7xxxvar.h,v 1.9 1996/11/28 23:27:45 niklas Exp $ */ /* $NetBSD: aic7xxxvar.h,v 1.10 1996/10/21 22:34:09 thorpej Exp $ */ /* * Interface to the generic driver for the aic7xxx based adaptec * SCSI controllers. This is used to implement product specific * probe and attach routines. * * Copyright (c) 1994, 1995, 1996 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _AIC7XXX_H_ #define _AIC7XXX_H_ #if defined(__FreeBSD__) #include "ahc.h" /* for NAHC from config */ #endif #if defined(__NetBSD__) || defined(__OpenBSD__) /* * convert FreeBSD's symbols to NetBSD's */ #define STAILQ_ENTRY SIMPLEQ_ENTRY #define STAILQ_HEAD SIMPLEQ_HEAD #define STAILQ_INIT SIMPLEQ_INIT #define STAILQ_INSERT_HEAD SIMPLEQ_INSERT_HEAD #define STAILQ_INSERT_TAIL SIMPLEQ_INSERT_TAIL #define STAILQ_REMOVE_HEAD(head, field) \ SIMPLEQ_REMOVE_HEAD(head, (head)->sqh_first, field) #define stqh_first sqh_first #define stqe_next sqe_next #endif #if defined(__FreeBSD__) #define AHC_INB(ahc, port) \ inb((ahc)->baseport+(port)) #define AHC_INSB(ahc, port, valp, size) \ insb((ahc)->baseport+(port), valp, size) #define AHC_OUTB(ahc, port, val) \ outb((ahc)->baseport+(port), val) #define AHC_OUTSB(ahc, port, valp, size) \ outsb((ahc)->baseport+(port), valp, size) #define AHC_OUTSL(ahc, port, valp, size) \ outsl((ahc)->baseport+(port), valp, size) #elif defined(__NetBSD__) || defined(__OpenBSD__) #define AHC_INB(ahc, port) \ bus_space_read_1((ahc)->sc_iot, (ahc)->sc_ioh, port) #define AHC_INSB(ahc, port, valp, size) \ bus_space_read_multi_1((ahc)->sc_iot, (ahc)->sc_ioh, port, valp, size) #define AHC_OUTB(ahc, port, val) \ bus_space_write_1((ahc)->sc_iot, (ahc)->sc_ioh, port, val) #define AHC_OUTSB(ahc, port, valp, size) \ bus_space_write_multi_1((ahc)->sc_iot, (ahc)->sc_ioh, port, valp, size) #define AHC_OUTSL(ahc, port, valp, size) \ bus_space_write_multi_4((ahc)->sc_iot, (ahc)->sc_ioh, port, valp, size) #endif #define AHC_NSEG 256 /* number of dma segments supported */ #define AHC_SCB_MAX 255 /* * Up to 255 SCBs on some types of aic7xxx * based boards. The aic7870 have 16 internal * SCBs, but external SRAM bumps this to 255. * The aic7770 family have only 4, and the * aic7850 has only 3. */ typedef u_int32_t physaddr; #if defined(__FreeBSD__) extern u_long ahc_unit; #endif struct ahc_dma_seg { physaddr addr; u_int32_t len; }; typedef enum { AHC_NONE = 0x000, AHC_ULTRA = 0x001, /* Supports 20MHz Transfers */ AHC_WIDE = 0x002, /* Wide Channel */ AHC_TWIN = 0x008, /* Twin Channel */ AHC_AIC7770 = 0x010, AHC_AIC7850 = 0x020, AHC_AIC7860 = 0x021, /* ULTRA version of the aic7850 */ AHC_AIC7870 = 0x040, AHC_AIC7880 = 0x041, AHC_AIC78X0 = 0x060, /* PCI Based Controller */ AHC_274 = 0x110, /* EISA Based Controller */ AHC_284 = 0x210, /* VL/ISA Based Controller */ AHC_294AU = 0x421, /* aic7860 based '2940' */ AHC_294 = 0x440, /* PCI Based Controller */ AHC_294U = 0x441, /* ULTRA PCI Based Controller */ AHC_394 = 0x840, /* Twin Channel PCI Controller */ AHC_394U = 0x841, /* Twin, ULTRA Channel PCI Controller */ }ahc_type; typedef enum { AHC_FNONE = 0x00, AHC_INIT = 0x01, AHC_RUNNING = 0x02, AHC_PAGESCBS = 0x04, /* Enable SCB paging */ AHC_CHANNEL_B_PRIMARY = 0x08, /* * On twin channel adapters, probe * channel B first since it is the * primary bus. */ AHC_USEDEFAULTS = 0x10, /* * For cards without an seeprom * or a BIOS to initialize the chip's * SRAM, we use the default target * settings. */ AHC_CHNLB = 0x20, /* * Second controller on 3940 * Also encodes the offset in the * SEEPROM for CHNLB info (32) */ }ahc_flag; typedef enum { SCB_FREE = 0x0000, SCB_ACTIVE = 0x0001, SCB_ABORTED = 0x0002, SCB_DEVICE_RESET = 0x0004, SCB_IMMED = 0x0008, SCB_SENSE = 0x0010, SCB_TIMEDOUT = 0x0020, SCB_QUEUED_FOR_DONE = 0x0040, SCB_PAGED_OUT = 0x0080, SCB_WAITINGQ = 0x0100, SCB_ASSIGNEDQ = 0x0200, SCB_SENTORDEREDTAG = 0x0400, SCB_MSGOUT_SDTR = 0x0800, SCB_MSGOUT_WDTR = 0x1000 }scb_flag; /* * The driver keeps up to MAX_SCB scb structures per card in memory. Only the * first 28 bytes of the structure need to be transfered to the card during * normal operation. The fields starting at byte 28 are used for kernel level * bookkeeping. */ struct scb { /* ------------ Begin hardware supported fields ---------------- */ /*0*/ u_char control; /*1*/ u_char tcl; /* 4/1/3 bits */ /*2*/ u_char status; /*3*/ u_char SG_segment_count; /*4*/ physaddr SG_list_pointer; /*8*/ u_char residual_SG_segment_count; /*9*/ u_char residual_data_count[3]; /*12*/ physaddr data; /*16*/ u_int32_t datalen; /* Really only three bits, but its * faster to treat it as a long on * a quad boundary. */ /*20*/ physaddr cmdpointer; /*24*/ u_char cmdlen; /*25*/ u_char tag; /* Index into our kernel SCB array. * Also used as the tag for tagged I/O */ #define SCB_PIO_TRANSFER_SIZE 26 /* amount we need to upload/download * via PIO to initialize a transaction. */ /*26*/ u_char next; /* Used for threading SCBs in the * "Waiting for Selection" and * "Disconnected SCB" lists down * in the sequencer. */ /*27*/ u_char prev; /*-----------------end of hardware supported fields----------------*/ STAILQ_ENTRY(scb) links; /* for chaining */ struct scsi_xfer *xs; /* the scsi_xfer for this cmd */ scb_flag flags; u_char position; /* Position in card's scbarray */ struct ahc_dma_seg ahc_dma[AHC_NSEG] __attribute__ ((packed)); struct scsi_sense sense_cmd; /* SCSI command block */ }; struct ahc_data { #if defined(__FreeBSD__) int unit; #elif defined(__NetBSD__) || defined(__OpenBSD__) struct device sc_dev; void *sc_ih; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; #endif ahc_type type; ahc_flag flags; #if defined(__FreeBSD__) u_long baseport; #endif struct scb *scbarray[AHC_SCB_MAX]; /* Mirror boards scbarray */ struct scb *pagedout_ntscbs[16];/* * Paged out, non-tagged scbs * indexed by target. */ STAILQ_HEAD(, scb) free_scbs; /* * SCBs assigned to free slots * on the card. (no paging required) */ STAILQ_HEAD(, scb) page_scbs; /* * SCBs that will require paging * before use (no assigned slot) */ STAILQ_HEAD(, scb) waiting_scbs;/* * SCBs waiting to be paged in * and started. */ STAILQ_HEAD(, scb)assigned_scbs;/* * SCBs that were waiting but have * now been assigned a slot by * ahc_free_scb. */ struct scsi_link sc_link; struct scsi_link sc_link_b; /* Second bus for Twin channel cards */ u_short needsdtr_orig; /* Targets we initiate sync neg with */ u_short needwdtr_orig; /* Targets we initiate wide neg with */ u_short needsdtr; /* Current list of negotiated targets */ u_short needwdtr; /* Current list of negotiated targets */ u_short sdtrpending; /* Pending SDTR to these targets */ u_short wdtrpending; /* Pending WDTR to these targets */ u_short tagenable; /* Targets that can handle tagqueing */ u_short orderedtag; /* Targets to use ordered tag on */ u_short discenable; /* Targets allowed to disconnect */ u_char our_id; /* our scsi id */ u_char our_id_b; /* B channel scsi id */ u_char numscbs; u_char activescbs; u_char maxhscbs; /* Number of SCBs on the card */ u_char maxscbs; /* * Max SCBs we allocate total including * any that will force us to page SCBs */ u_char qcntmask; u_char unpause; u_char pause; u_char in_timeout; }; /* #define AHC_DEBUG */ #ifdef AHC_DEBUG /* Different debugging levels used when AHC_DEBUG is defined */ #define AHC_SHOWMISC 0x0001 #define AHC_SHOWCMDS 0x0002 #define AHC_SHOWSCBS 0x0004 #define AHC_SHOWABORTS 0x0008 #define AHC_SHOWSENSE 0x0010 #define AHC_SHOWSCBCNT 0x0020 extern int ahc_debug; /* Initialized in i386/scsi/aic7xxx.c */ #endif #if defined(__FreeBSD__) char *ahc_name __P((struct ahc_data *ahc)); void ahc_reset __P((u_long iobase)); struct ahc_data *ahc_alloc __P((int unit, u_long io_base, ahc_type type, ahc_flag flags)); #elif defined(__NetBSD__) || defined(__OpenBSD__) #define ahc_name(ahc) (ahc)->sc_dev.dv_xname void ahc_reset __P((char *devname, bus_space_tag_t iot, bus_space_handle_t ioh)); void ahc_construct __P((struct ahc_data *ahc, bus_space_tag_t iot, bus_space_handle_t ioh, ahc_type type, ahc_flag flags)); #endif void ahc_free __P((struct ahc_data *)); int ahc_init __P((struct ahc_data *)); int ahc_attach __P((struct ahc_data *)); #if defined(__FreeBSD__) void ahc_intr __P((void *arg)); #elif defined(__NetBSD__) || defined(__OpenBSD__) int ahc_intr __P((void *arg)); #endif #endif /* _AIC7XXX_H_ */