/* $OpenBSD: bhareg.h,v 1.4 2008/09/01 17:30:56 deraadt Exp $ */ /* $NetBSD: bhareg.h,v 1.12 1998/08/17 00:26:33 mycroft Exp $ */ /*- * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace * Simulation Facility, NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. */ typedef u_int8_t physaddr[4]; typedef u_int8_t physlen[4]; #define ltophys _lto4l #define phystol _4ltol /* * I/O port offsets */ #define BHA_CTRL_PORT 0 /* control (wo) */ #define BHA_STAT_PORT 0 /* status (ro) */ #define BHA_CMD_PORT 1 /* command (wo) */ #define BHA_DATA_PORT 1 /* data (ro) */ #define BHA_INTR_PORT 2 /* interrupt status (ro) */ #define BHA_EXTGEOM_PORT 3 /* extended geometry (ro) */ /* * BHA_CTRL bits */ #define BHA_CTRL_HRST 0x80 /* Hardware reset */ #define BHA_CTRL_SRST 0x40 /* Software reset */ #define BHA_CTRL_IRST 0x20 /* Interrupt reset */ #define BHA_CTRL_SCRST 0x10 /* SCSI bus reset */ /* * BHA_STAT bits */ #define BHA_STAT_STST 0x80 /* Self test in Progress */ #define BHA_STAT_DIAGF 0x40 /* Diagnostic Failure */ #define BHA_STAT_INIT 0x20 /* Mbx Init required */ #define BHA_STAT_IDLE 0x10 /* Host Adapter Idle */ #define BHA_STAT_CDF 0x08 /* cmd/data out port full */ #define BHA_STAT_DF 0x04 /* Data in port full */ #define BHA_STAT_INVDCMD 0x01 /* Invalid command */ #define BHA_STAT_BITS "\020\1invcmd\3df\4cdf\5idle\6init\7diagf\10stst" /* * BHA_CMD opcodes */ #define BHA_NOP 0x00 /* No operation */ #define BHA_MBX_INIT 0x01 /* Mbx initialization */ #define BHA_START_SCSI 0x02 /* start scsi command */ #define BHA_EXECUTE_BIOS_CMD 0x03 /* execute BIOS command */ #define BHA_INQUIRE_REVISION 0x04 /* Adapter Inquiry */ #define BHA_MBO_INTR_EN 0x05 /* Enable MBO available interrupt */ #define BHA_SEL_TIMEOUT_SET 0x06 /* set selection time-out */ #define BHA_BUS_ON_TIME_SET 0x07 /* set bus-on time */ #define BHA_BUS_OFF_TIME_SET 0x08 /* set bus-off time */ #define BHA_BUS_SPEED_SET 0x09 /* set bus transfer speed */ #define BHA_INQUIRE_DEVICES 0x0a /* return installed devices 0-7 */ #define BHA_INQUIRE_CONFIG 0x0b /* return configuration data */ #define BHA_TARGET_EN 0x0c /* enable target mode */ #define BHA_INQUIRE_SETUP 0x0d /* return setup data */ #define BHA_WRITE_LRAM 0x1a /* write adapter local RAM */ #define BHA_READ_LRAM 0x1b /* read adapter local RAM */ #define BHA_WRITE_CHIP_FIFO 0x1c /* write bus master chip FIFO */ #define BHA_READ_CHIP_FIFO 0x1d /* read bus master chip FIFO */ #define BHA_ECHO 0x1f /* Echo command byte */ #define BHA_ADAPTER_DIAGNOSTICS 0x20 /* host adapter diagnostics */ #define BHA_SET_ADAPTER_OPTIONS 0x21 /* set adapter options */ #define BHA_INQUIRE_DEVICES_2 0x23 /* return installed devices 8-15 */ #define BHA_INQUIRE_TARG_DEVS 0x24 /* inquire target devices */ #define BHA_DISABLE_HAC_INTR 0x25 /* disable host adapter interrupt */ #define BHA_MBX_INIT_EXTENDED 0x81 /* Mbx initialization */ #define BHA_EXECUTE_SCSI_CMD 0x83 /* execute SCSI command */ #define BHA_INQUIRE_REVISION_3 0x84 /* Get 3rd firmware version byte */ #define BHA_INQUIRE_REVISION_4 0x85 /* Get 4th firmware version byte */ #define BHA_INQUIRE_PCI_INFO 0x86 /* get PCI host adapter information */ #define BHA_INQUIRE_MODEL 0x8b /* Get hardware ID and revision */ #define BHA_INQUIRE_PERIOD 0x8c /* Get synchronous period */ #define BHA_INQUIRE_EXTENDED 0x8d /* Adapter Setup Inquiry */ #define BHA_ROUND_ROBIN 0x8f /* Enable/Disable(default) round robin */ #define BHA_STORE_LRAM 0x90 /* store host adapter local RAM */ #define BHA_FETCH_LRAM 0x91 /* fetch host adapter local RAM */ #define BHA_SAVE_TO_EEPROM 0x92 /* store local RAM data in EEPROM */ #define BHA_UPLOAD_AUTOSCSI 0x94 /* upload AutoSCSI code */ #define BHA_MODIFY_IOPORT 0x95 /* change or disable I/O port */ #define BHA_SET_CCB_FORMAT 0x96 /* set CCB format (legacy/wide lun) */ #define BHA_WRITE_INQUIRY_BUF 0x9a /* write inquiry buffer */ #define BHA_READ_INQUIRY_BUF 0x9b /* read inquiry buffer */ #define BHA_FLASH_UP_DOWNLOAD 0xa7 /* flash upload/downlod */ #define BHA_READ_SCAM_DATA 0xa8 /* read SCAM data */ #define BHA_WRITE_SCAM_DATA 0xa9 /* write SCAM data */ /* * BHA_INTR bits */ #define BHA_INTR_ANYINTR 0x80 /* Any interrupt */ #define BHA_INTR_SCRD 0x08 /* SCSI reset detected */ #define BHA_INTR_HACC 0x04 /* Command complete */ #define BHA_INTR_MBOA 0x02 /* MBX out empty */ #define BHA_INTR_MBIF 0x01 /* MBX in full */ struct bha_mbx_out { physaddr ccb_addr; u_int8_t reserved[3]; u_int8_t cmd; } __packed; struct bha_mbx_in { physaddr ccb_addr; u_int8_t host_stat; u_int8_t target_stat; u_int8_t reserved; u_int8_t comp_stat; } __packed; /* * mbo.cmd values */ #define BHA_MBO_FREE 0x0 /* MBO entry is free */ #define BHA_MBO_START 0x1 /* MBO activate entry */ #define BHA_MBO_ABORT 0x2 /* MBO abort entry */ /* * mbi.comp_stat values */ #define BHA_MBI_FREE 0x0 /* MBI entry is free */ #define BHA_MBI_OK 0x1 /* completed without error */ #define BHA_MBI_ABORT 0x2 /* aborted ccb */ #define BHA_MBI_UNKNOWN 0x3 /* Tried to abort invalid CCB */ #define BHA_MBI_ERROR 0x4 /* Completed with error */ #if defined(BIG_DMA) WARNING...THIS WON'T WORK(won't fit on 1 page) #if 0 #define BHA_NSEG 2048 /* Number of scatter gather segments - to much vm */ #endif #define BHA_NSEG 128 #else #define BHA_NSEG 33 #endif /* BIG_DMA */ struct bha_scat_gath { physlen seg_len; physaddr seg_addr; } __packed; struct bha_ccb { u_int8_t opcode; #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t :3, data_in :1, data_out :1, wide_tag_enable :1, /* Wide Lun CCB format */ wide_tag_type :2; /* Wide Lun CCB format */ #else u_int8_t wide_tag_type :2, /* Wide Lun CCB format */ wide_tag_enable :1, /* Wide Lun CCB format */ data_out :1, data_in :1, :3; #endif u_int8_t scsi_cmd_length; u_int8_t req_sense_length; /*------------------------------------longword boundary */ physlen data_length; /*------------------------------------longword boundary */ physaddr data_addr; /*------------------------------------longword boundary */ u_int8_t reserved1[2]; u_int8_t host_stat; u_int8_t target_stat; /*------------------------------------longword boundary */ u_int8_t target; #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t lun :5, tag_enable :1, tag_type :2; #else u_int8_t tag_type :2, tag_enable :1, lun :5; #endif struct scsi_generic scsi_cmd; u_int8_t reserved2[1]; u_int8_t link_id; /*------------------------------------longword boundary */ physaddr link_addr; /*------------------------------------longword boundary */ physaddr sense_ptr; /*-----end of HW fields-----------------------longword boundary */ struct scsi_sense_data scsi_sense; /*------------------------------------longword boundary */ struct bha_scat_gath scat_gath[BHA_NSEG]; /*------------------------------------longword boundary */ TAILQ_ENTRY(bha_ccb) chain; struct bha_ccb *nexthash; bus_addr_t hashkey; struct scsi_xfer *xs; /* the scsipi_xfer for this cmd */ int flags; #define CCB_ALLOC 0x01 #define CCB_ABORT 0x02 #ifdef BHADIAG #define CCB_SENDING 0x04 #endif int timeout; /* * This DMA map maps the buffer involved in the transfer. * Its contents are loaded into "scat_gath" above. */ bus_dmamap_t dmamap_xfer; } __packed; /* * opcode fields */ #define BHA_INITIATOR_CCB 0x00 /* SCSI Initiator CCB */ #define BHA_TARGET_CCB 0x01 /* SCSI Target CCB */ #define BHA_INIT_SCAT_GATH_CCB 0x02 /* SCSI Initiator with S/G */ #define BHA_INIT_RESID_CCB 0x03 /* SCSI Initiator w/ residual */ #define BHA_INIT_RESID_SG_CCB 0x04 /* SCSI Initiator w/ residual and S/G */ #define BHA_RESET_CCB 0x81 /* SCSI Bus reset */ /* * bha_ccb.host_stat values */ #define BHA_OK 0x00 /* cmd ok */ #define BHA_LINK_OK 0x0a /* Link cmd ok */ #define BHA_LINK_IT 0x0b /* Link cmd ok + int */ #define BHA_DATA_UNDRN 0x0c /* data underrun error */ #define BHA_SEL_TIMEOUT 0x11 /* Selection time out */ #define BHA_OVER_UNDER 0x12 /* Data over/under run */ #define BHA_BUS_FREE 0x13 /* Bus dropped at unexpected time */ #define BHA_INV_BUS 0x14 /* Invalid bus phase/sequence */ #define BHA_BAD_MBO 0x15 /* Incorrect MBO cmd */ #define BHA_BAD_CCB 0x16 /* Incorrect ccb opcode */ #define BHA_BAD_LINK 0x17 /* Not same values of LUN for links */ #define BHA_INV_TARGET 0x18 /* Invalid target direction */ #define BHA_CCB_DUP 0x19 /* Duplicate CCB received */ #define BHA_INV_CCB 0x1a /* Invalid CCB or segment list */ #define BHA_AUTOSENSE_FAILED 0x1b /* auto REQUEST SENSE failed */ #define BHA_TAGGED_MSG_REJ 0x1c /* tagged queueing message rejected */ #define BHA_UNSUP_MSG_RECVD 0x1d /* unsupported message received */ #define BHA_HARDWARE_FAILURE 0x20 /* host adapter hardware failure */ #define BHA_TARG_IGNORED_ATN 0x21 /* target ignored ATN signal */ #define BHA_HA_SCSI_BUS_RESET 0x22 /* host adapter asserted RST */ #define BHA_OTHER_SCSI_BUS_RESET 0x23 /* other device asserted RST */ #define BHA_BAD_RECONNECT 0x24 /* target reconnected improperly */ #define BHA_HA_BUS_DEVICE_RESET 0x25 /* host adapter performed BDR */ #define BHA_ABORT_QUEUE 0x26 /* abort queue generated */ #define BHA_SOFTWARE_FAILURE 0x27 /* host adapter software failure */ #define BHA_HARDWARE_WATCHDOG 0x30 /* host adapter watchdog timer fired */ #define BHA_SCSI_PARITY_ERROR 0x34 /* SCSI parity error detected */ struct bha_extended_inquire { struct { u_char opcode; u_char len; } __packed cmd; struct { u_char bus_type; /* Type of bus connected to */ #define BHA_BUS_TYPE_24BIT 'A' /* ISA bus */ #define BHA_BUS_TYPE_32BIT 'E' /* EISA/VLB/PCI bus */ #define BHA_BUS_TYPE_MCA 'M' /* MicroChannel bus */ u_char bios_address; /* Address of adapter BIOS */ u_short sg_limit; u_char mbox_count; u_char mbox_baseaddr[4]; /* packed/unaligned u_int32_t */ u_char intrflags; #define BHA_INTR_FASTEISA 0x04 #define BHA_INTR_LEVEL 0x40 /* bit 6: level-sensitive interrupt */ u_char firmware_level[3]; /* last 3 digits of firmware rev */ u_char scsi_flags; /* supported SCSI features */ #define BHA_SCSI_WIDE 0x01 /* host adapter is wide */ #define BHA_SCSI_DIFFERENTIAL 0x02 /* host adapter is differential */ #define BHA_SCSI_SCAM 0x04 /* host adapter supports SCAM */ #define BHA_SCSI_ULTRA 0x08 /* host adapter supports Ultra */ #define BHA_SCSI_TERMINATION 0x10 /* host adapter supports smart termination */ } __packed reply; } __packed; struct bha_config { struct { u_char opcode; } __packed cmd; struct { u_char chan; u_char intr; #if BYTE_ORDER == LITTLE_ENDIAN u_char scsi_dev :3, :5; #else u_char :5, scsi_dev :3; #endif } __packed reply; } __packed; struct bha_toggle { struct { u_char opcode; u_char enable; } __packed cmd; } __packed; struct bha_mailbox { struct { u_char opcode; u_char nmbx; physaddr addr; } __packed cmd; } __packed; struct bha_model { struct { u_char opcode; u_char len; } __packed cmd; struct { u_char id[4]; /* i.e bt742a -> '7','4','2','A' */ u_char version[2]; /* i.e Board Revision 'H' -> 'H', 0x00 */ } __packed reply; } __packed; struct bha_revision { struct { u_char opcode; } __packed cmd; struct { u_char board_type; u_char custom_feature; char firm_revision; u_char firm_version; } __packed reply; } __packed; struct bha_digit { struct { u_char opcode; } __packed cmd; struct { u_char digit; } __packed reply; } __packed; struct bha_devices { struct { u_char opcode; } __packed cmd; struct { u_char lun_map[8]; } __packed reply; } __packed; struct bha_sync { #if BYTE_ORDER == LITTLE_ENDIAN u_char offset :4, period :3, valid :1; #else u_char valid :1, period :3, offset :4; #endif } __packed; struct bha_setup_reply { #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t sync_neg :1, parity :1, :6; #else u_int8_t :6, parity :1, sync_neg :1; #endif u_int8_t speed; u_int8_t bus_on; u_int8_t bus_off; u_int8_t num_mbx; u_int8_t mbx[3]; /*XXX */ /* doesn't make sense with 32bit addresses */ struct bha_sync sync[8]; u_int8_t disc_sts; } __packed; /* additional reply data supplied by wide controllers */ struct bha_setup_reply_wide { u_int8_t signature; u_int8_t letter_d; u_int8_t ha_type; u_int8_t low_wide_allowed; u_int8_t low_wide_active; struct bha_sync sync_high[8]; u_int8_t high_disc_info; u_int8_t reserved; u_int8_t high_wide_allowed; u_int8_t high_wide_active; } __packed; struct bha_setup { struct { u_char opcode; u_char len; } __packed cmd; struct bha_setup_reply reply; struct bha_setup_reply_wide reply_w; /* for wide controllers */ } __packed; struct bha_period_reply { u_char period[8]; } __packed; struct bha_period { struct { u_char opcode; u_char len; } __packed cmd; struct bha_period_reply reply; struct bha_period_reply reply_w; /* for wide controllers */ } __packed; struct bha_isadisable { struct { u_char opcode; u_char modifier; } __packed cmd; } __packed; /* * bha_isadisable.modifier parameters */ #define BHA_IOMODIFY_330 0x00 #define BHA_IOMODIFY_334 0x01 #define BHA_IOMODIFY_DISABLE1 0x06 #define BHA_IOMODIFY_DISABLE2 0x07 #define INT9 0x01 #define INT10 0x02 #define INT11 0x04 #define INT12 0x08 #define INT14 0x20 #define INT15 0x40 #define EISADMA 0x00 #define CHAN0 0x01 #define CHAN5 0x20 #define CHAN6 0x40 #define CHAN7 0x80