/* $OpenBSD: com.c,v 1.138 2010/04/12 12:57:52 tedu Exp $ */ /* $NetBSD: com.c,v 1.82.4.1 1996/06/02 09:08:00 mrg Exp $ */ /* * Copyright (c) 1997 - 1999, Jason Downs. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /*- * Copyright (c) 1993, 1994, 1995, 1996 * Charles M. Hannum. All rights reserved. * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)com.c 7.5 (Berkeley) 5/16/91 */ /* * COM driver, based on HP dca driver * uses National Semiconductor NS16450/NS16550AF UART */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #include #endif #include #if !defined(__sparc__) || defined(__sparc64__) #include #endif #if !defined(__sparc__) || defined(__sparc64__) #define COM_CONSOLE #include #endif #include #include #include #define com_lcr com_cfcr #ifdef COM_PXA2X0 #define com_isr 8 #define ISR_SEND (ISR_RXPL | ISR_XMODE | ISR_XMITIR) #define ISR_RECV (ISR_RXPL | ISR_XMODE | ISR_RCVEIR) #endif #ifdef __zaurus__ #include #endif cdev_decl(com); static u_char tiocm_xxx2mcr(int); void compwroff(struct com_softc *); void cominit(bus_space_tag_t, bus_space_handle_t, int, int); int com_is_console(bus_space_tag_t, bus_addr_t); struct cfdriver com_cd = { NULL, "com", DV_TTY }; int comdefaultrate = TTYDEF_SPEED; #ifdef COM_PXA2X0 bus_addr_t comsiraddr; #endif #ifdef COM_CONSOLE int comconsfreq; int comconsrate = TTYDEF_SPEED; int comconsinit; bus_addr_t comconsaddr = 0; int comconsattached; bus_space_tag_t comconsiot; bus_space_handle_t comconsioh; int comconsunit; tcflag_t comconscflag = TTYDEF_CFLAG; #endif int commajor; #ifdef KGDB #include bus_addr_t com_kgdb_addr; bus_space_tag_t com_kgdb_iot; bus_space_handle_t com_kgdb_ioh; int com_kgdb_getc(void *); void com_kgdb_putc(void *, int); #endif /* KGDB */ #define DEVUNIT(x) (minor(x) & 0x7f) #define DEVCUA(x) (minor(x) & 0x80) int comspeed(long freq, long speed) { #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ int x, err; if (speed == 0) return 0; if (speed < 0) return -1; x = divrnd((freq / 16), speed); if (x <= 0) return -1; err = divrnd((quad_t)freq * 1000 / 16, speed * x) - 1000; if (err < 0) err = -err; if (err > COM_TOLERANCE) return -1; return x; #undef divrnd } #ifdef COM_CONSOLE int comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh) { int i, k; /* force access to id reg */ bus_space_write_1(iot, ioh, com_lcr, 0); bus_space_write_1(iot, ioh, com_iir, 0); for (i = 0; i < 32; i++) { k = bus_space_read_1(iot, ioh, com_iir); if (k & 0x38) { bus_space_read_1(iot, ioh, com_data); /* cleanup */ } else break; } if (i >= 32) return 0; return 1; } #endif int com_detach(struct device *self, int flags) { struct com_softc *sc = (struct com_softc *)self; int maj, mn; sc->sc_swflags |= COM_SW_DEAD; /* Locate the major number. */ for (maj = 0; maj < nchrdev; maj++) if (cdevsw[maj].d_open == comopen) break; /* Nuke the vnodes for any open instances. */ mn = self->dv_unit; vdevgone(maj, mn, mn, VCHR); /* XXX a symbolic constant for the cua bit would be nicer. */ mn |= 0x80; vdevgone(maj, mn, mn, VCHR); /* Detach and free the tty. */ if (sc->sc_tty) { ttyfree(sc->sc_tty); } timeout_del(&sc->sc_dtr_tmo); timeout_del(&sc->sc_diag_tmo); softintr_disestablish(sc->sc_si); return (0); } int com_activate(struct device *self, int act) { struct com_softc *sc = (struct com_softc *)self; int s, rv = 0; s = spltty(); switch (act) { case DVACT_ACTIVATE: break; case DVACT_DEACTIVATE: #ifdef KGDB if (sc->sc_hwflags & (COM_HW_CONSOLE|COM_HW_KGDB)) { #else if (sc->sc_hwflags & COM_HW_CONSOLE) { #endif /* KGDB */ rv = EBUSY; break; } if (sc->disable != NULL && sc->enabled != 0) { (*sc->disable)(sc); sc->enabled = 0; } break; } splx(s); return (rv); } int comopen(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct com_softc *sc; bus_space_tag_t iot; bus_space_handle_t ioh; struct tty *tp; int s; int error = 0; if (unit >= com_cd.cd_ndevs) return ENXIO; sc = com_cd.cd_devs[unit]; if (!sc) return ENXIO; #ifdef KGDB /* * If this is the kgdb port, no other use is permitted. */ if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) return (EBUSY); #endif /* KGDB */ s = spltty(); if (!sc->sc_tty) { tp = sc->sc_tty = ttymalloc(); } else tp = sc->sc_tty; splx(s); tp->t_oproc = comstart; tp->t_param = comparam; tp->t_dev = dev; if (!ISSET(tp->t_state, TS_ISOPEN)) { SET(tp->t_state, TS_WOPEN); ttychars(tp); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; #ifdef COM_CONSOLE if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { tp->t_cflag = comconscflag; tp->t_ispeed = tp->t_ospeed = comconsrate; } else #endif { tp->t_cflag = TTYDEF_CFLAG; tp->t_ispeed = tp->t_ospeed = comdefaultrate; } if (ISSET(sc->sc_swflags, COM_SW_CLOCAL)) SET(tp->t_cflag, CLOCAL); if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS)) SET(tp->t_cflag, CRTSCTS); if (ISSET(sc->sc_swflags, COM_SW_MDMBUF)) SET(tp->t_cflag, MDMBUF); tp->t_lflag = TTYDEF_LFLAG; s = spltty(); sc->sc_initialize = 1; comparam(tp, &tp->t_termios); ttsetwater(tp); sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0]; sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER; sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE; iot = sc->sc_iot; ioh = sc->sc_ioh; /* * Wake up the sleepy heads. */ switch (sc->sc_uarttype) { case COM_UART_ST16650: case COM_UART_ST16650V2: bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); bus_space_write_1(iot, ioh, com_efr, EFR_ECB); bus_space_write_1(iot, ioh, com_ier, 0); bus_space_write_1(iot, ioh, com_efr, 0); bus_space_write_1(iot, ioh, com_lcr, 0); break; case COM_UART_TI16750: bus_space_write_1(iot, ioh, com_ier, 0); break; case COM_UART_PXA2X0: bus_space_write_1(iot, ioh, com_ier, IER_EUART); break; } if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { u_int8_t fifo = FIFO_ENABLE|FIFO_RCV_RST|FIFO_XMT_RST; u_int8_t lcr; if (tp->t_ispeed <= 1200) fifo |= FIFO_TRIGGER_1; else fifo |= FIFO_TRIGGER_8; if (sc->sc_uarttype == COM_UART_TI16750) { fifo |= FIFO_ENABLE_64BYTE; lcr = bus_space_read_1(iot, ioh, com_lcr); bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); } /* * (Re)enable and drain FIFOs. * * Certain SMC chips cause problems if the FIFOs are * enabled while input is ready. Turn off the FIFO * if necessary to clear the input. Test the input * ready bit after enabling the FIFOs to handle races * between enabling and fresh input. * * Set the FIFO threshold based on the receive speed. */ for (;;) { bus_space_write_1(iot, ioh, com_fifo, 0); delay(100); (void) bus_space_read_1(iot, ioh, com_data); bus_space_write_1(iot, ioh, com_fifo, fifo | FIFO_RCV_RST | FIFO_XMT_RST); delay(100); if(!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) break; } if (sc->sc_uarttype == COM_UART_TI16750) bus_space_write_1(iot, ioh, com_lcr, lcr); } /* Flush any pending I/O. */ while (ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) (void) bus_space_read_1(iot, ioh, com_data); /* You turn me on, baby! */ sc->sc_mcr = MCR_DTR | MCR_RTS; if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN)) SET(sc->sc_mcr, MCR_IENABLE); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC; #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0) sc->sc_ier |= IER_EUART | IER_ERXTOUT; #endif bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); sc->sc_msr = bus_space_read_1(iot, ioh, com_msr); if (ISSET(sc->sc_swflags, COM_SW_SOFTCAR) || DEVCUA(dev) || ISSET(sc->sc_msr, MSR_DCD) || ISSET(tp->t_cflag, MDMBUF)) SET(tp->t_state, TS_CARR_ON); else CLR(tp->t_state, TS_CARR_ON); #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0 && ISSET(sc->sc_hwflags, COM_HW_SIR)) { bus_space_write_1(iot, ioh, com_isr, ISR_RECV); #ifdef __zaurus__ scoop_set_irled(1); #endif } #endif } else if (ISSET(tp->t_state, TS_XCLUDE) && suser(p, 0) != 0) return EBUSY; else s = spltty(); if (DEVCUA(dev)) { if (ISSET(tp->t_state, TS_ISOPEN)) { /* Ah, but someone already is dialed in... */ splx(s); return EBUSY; } sc->sc_cua = 1; /* We go into CUA mode. */ } else { /* tty (not cua) device; wait for carrier if necessary. */ if (ISSET(flag, O_NONBLOCK)) { if (sc->sc_cua) { /* Opening TTY non-blocking... but the CUA is busy. */ splx(s); return EBUSY; } } else { while (sc->sc_cua || (!ISSET(tp->t_cflag, CLOCAL) && !ISSET(tp->t_state, TS_CARR_ON))) { SET(tp->t_state, TS_WOPEN); error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH, ttopen, 0); /* * If TS_WOPEN has been reset, that means the cua device * has been closed. We don't want to fail in that case, * so just go around again. */ if (error && ISSET(tp->t_state, TS_WOPEN)) { CLR(tp->t_state, TS_WOPEN); if (!sc->sc_cua && !ISSET(tp->t_state, TS_ISOPEN)) compwroff(sc); splx(s); return error; } } } } splx(s); return (*linesw[tp->t_line].l_open)(dev, tp, p); } int comclose(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct com_softc *sc = com_cd.cd_devs[unit]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; int s; #ifdef COM_CONSOLE /* XXX This is for cons.c. */ if (!ISSET(tp->t_state, TS_ISOPEN)) return 0; #endif if(sc->sc_swflags & COM_SW_DEAD) return 0; (*linesw[tp->t_line].l_close)(tp, flag, p); s = spltty(); if (ISSET(tp->t_state, TS_WOPEN)) { /* tty device is waiting for carrier; drop dtr then re-raise */ CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); timeout_add_sec(&sc->sc_dtr_tmo, 2); } else { /* no one else waiting; turn off the uart */ compwroff(sc); } CLR(tp->t_state, TS_BUSY | TS_FLUSH); sc->sc_cua = 0; splx(s); ttyclose(tp); #ifdef COM_CONSOLE #ifdef notyet /* XXXX */ if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { ttyfree(tp); sc->sc_tty = 0; } #endif #endif return 0; } void compwroff(struct com_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; CLR(sc->sc_lcr, LCR_SBREAK); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); bus_space_write_1(iot, ioh, com_ier, 0); if (ISSET(tp->t_cflag, HUPCL) && !ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) { /* XXX perhaps only clear DTR */ sc->sc_mcr = 0; bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } /* * Turn FIFO off; enter sleep mode if possible. */ bus_space_write_1(iot, ioh, com_fifo, 0); delay(100); (void) bus_space_read_1(iot, ioh, com_data); delay(100); bus_space_write_1(iot, ioh, com_fifo, FIFO_RCV_RST | FIFO_XMT_RST); switch (sc->sc_uarttype) { case COM_UART_ST16650: case COM_UART_ST16650V2: bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); bus_space_write_1(iot, ioh, com_efr, EFR_ECB); bus_space_write_1(iot, ioh, com_ier, IER_SLEEP); bus_space_write_1(iot, ioh, com_lcr, 0); break; case COM_UART_TI16750: bus_space_write_1(iot, ioh, com_ier, IER_SLEEP); break; #ifdef COM_PXA2X0 case COM_UART_PXA2X0: bus_space_write_1(iot, ioh, com_ier, 0); #ifdef __zaurus__ if (ISSET(sc->sc_hwflags, COM_HW_SIR)) scoop_set_irled(0); #endif break; #endif } } void com_raisedtr(void *arg) { struct com_softc *sc = arg; SET(sc->sc_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr); } int comread(dev_t dev, struct uio *uio, int flag) { struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)]; struct tty *tp = sc->sc_tty; return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); } int comwrite(dev_t dev, struct uio *uio, int flag) { struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)]; struct tty *tp = sc->sc_tty; return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); } struct tty * comtty(dev_t dev) { struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)]; struct tty *tp = sc->sc_tty; return (tp); } static u_char tiocm_xxx2mcr(int data) { u_char m = 0; if (ISSET(data, TIOCM_DTR)) SET(m, MCR_DTR); if (ISSET(data, TIOCM_RTS)) SET(m, MCR_RTS); return m; } int comioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) { int unit = DEVUNIT(dev); struct com_softc *sc = com_cd.cd_devs[unit]; struct tty *tp = sc->sc_tty; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int error; error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return error; error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return error; switch (cmd) { case TIOCSBRK: SET(sc->sc_lcr, LCR_SBREAK); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); break; case TIOCCBRK: CLR(sc->sc_lcr, LCR_SBREAK); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); break; case TIOCSDTR: SET(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCCDTR: CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCMSET: CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); case TIOCMBIS: SET(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data)); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCMBIC: CLR(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data)); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCMGET: { u_char m; int bits = 0; m = sc->sc_mcr; if (ISSET(m, MCR_DTR)) SET(bits, TIOCM_DTR); if (ISSET(m, MCR_RTS)) SET(bits, TIOCM_RTS); m = sc->sc_msr; if (ISSET(m, MSR_DCD)) SET(bits, TIOCM_CD); if (ISSET(m, MSR_CTS)) SET(bits, TIOCM_CTS); if (ISSET(m, MSR_DSR)) SET(bits, TIOCM_DSR); if (ISSET(m, MSR_RI | MSR_TERI)) SET(bits, TIOCM_RI); if (bus_space_read_1(iot, ioh, com_ier)) SET(bits, TIOCM_LE); *(int *)data = bits; break; } case TIOCGFLAGS: { int driverbits, userbits = 0; driverbits = sc->sc_swflags; if (ISSET(driverbits, COM_SW_SOFTCAR)) SET(userbits, TIOCFLAG_SOFTCAR); if (ISSET(driverbits, COM_SW_CLOCAL)) SET(userbits, TIOCFLAG_CLOCAL); if (ISSET(driverbits, COM_SW_CRTSCTS)) SET(userbits, TIOCFLAG_CRTSCTS); if (ISSET(driverbits, COM_SW_MDMBUF)) SET(userbits, TIOCFLAG_MDMBUF); if (ISSET(driverbits, COM_SW_PPS)) SET(userbits, TIOCFLAG_PPS); *(int *)data = userbits; break; } case TIOCSFLAGS: { int userbits, driverbits = 0; error = suser(p, 0); if (error != 0) return(EPERM); userbits = *(int *)data; if (ISSET(userbits, TIOCFLAG_SOFTCAR) || ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) SET(driverbits, COM_SW_SOFTCAR); if (ISSET(userbits, TIOCFLAG_CLOCAL)) SET(driverbits, COM_SW_CLOCAL); if (ISSET(userbits, TIOCFLAG_CRTSCTS)) SET(driverbits, COM_SW_CRTSCTS); if (ISSET(userbits, TIOCFLAG_MDMBUF)) SET(driverbits, COM_SW_MDMBUF); if (ISSET(userbits, TIOCFLAG_PPS)) SET(driverbits, COM_SW_PPS); sc->sc_swflags = driverbits; break; } default: return ENOTTY; } return 0; } /* already called at spltty */ int comparam(struct tty *tp, struct termios *t) { struct com_softc *sc = com_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int ospeed = comspeed(sc->sc_frequency, t->c_ospeed); u_char lcr; tcflag_t oldcflag; /* Check requested parameters. */ if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed)) return EINVAL; lcr = ISSET(sc->sc_lcr, LCR_SBREAK); switch (ISSET(t->c_cflag, CSIZE)) { case CS5: SET(lcr, LCR_5BITS); break; case CS6: SET(lcr, LCR_6BITS); break; case CS7: SET(lcr, LCR_7BITS); break; case CS8: SET(lcr, LCR_8BITS); break; } if (ISSET(t->c_cflag, PARENB)) { SET(lcr, LCR_PENAB); if (!ISSET(t->c_cflag, PARODD)) SET(lcr, LCR_PEVEN); } if (ISSET(t->c_cflag, CSTOPB)) SET(lcr, LCR_STOPB); sc->sc_lcr = lcr; if (ospeed == 0) { CLR(sc->sc_mcr, MCR_DTR); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } /* * Set the FIFO threshold based on the receive speed, if we are * changing it. */ if (sc->sc_initialize || (tp->t_ispeed != t->c_ispeed)) { sc->sc_initialize = 0; if (ospeed != 0) { /* * Make sure the transmit FIFO is empty before * proceeding. If we don't do this, some revisions * of the UART will hang. Interestingly enough, * even if we do this while the last character is * still being pushed out, they don't hang. This * seems good enough. */ while (ISSET(tp->t_state, TS_BUSY)) { int error; ++sc->sc_halt; error = ttysleep(tp, &tp->t_outq, TTOPRI | PCATCH, "comprm", 0); --sc->sc_halt; if (error) { comstart(tp); return (error); } } bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); bus_space_write_1(iot, ioh, com_dlbl, ospeed); bus_space_write_1(iot, ioh, com_dlbh, ospeed >> 8); bus_space_write_1(iot, ioh, com_lcr, lcr); SET(sc->sc_mcr, MCR_DTR); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } else bus_space_write_1(iot, ioh, com_lcr, lcr); if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { if (sc->sc_uarttype == COM_UART_TI16750) { bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_ENABLE_64BYTE | (t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8)); bus_space_write_1(iot, ioh, com_lcr, lcr); } else bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | (t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8)); } } else bus_space_write_1(iot, ioh, com_lcr, lcr); /* When not using CRTSCTS, RTS follows DTR. */ if (!ISSET(t->c_cflag, CRTSCTS)) { if (ISSET(sc->sc_mcr, MCR_DTR)) { if (!ISSET(sc->sc_mcr, MCR_RTS)) { SET(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } else { if (ISSET(sc->sc_mcr, MCR_RTS)) { CLR(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } sc->sc_dtr = MCR_DTR | MCR_RTS; } else sc->sc_dtr = MCR_DTR; /* and copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; oldcflag = tp->t_cflag; tp->t_cflag = t->c_cflag; /* * If DCD is off and MDMBUF is changed, ask the tty layer if we should * stop the device. */ if (!ISSET(sc->sc_msr, MSR_DCD) && !ISSET(sc->sc_swflags, COM_SW_SOFTCAR) && ISSET(oldcflag, MDMBUF) != ISSET(tp->t_cflag, MDMBUF) && (*linesw[tp->t_line].l_modem)(tp, 0) == 0) { CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } /* Just to be sure... */ comstart(tp); return 0; } void comstart(struct tty *tp) { struct com_softc *sc = com_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int s; s = spltty(); if (ISSET(tp->t_state, TS_BUSY)) goto out; if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP) || sc->sc_halt > 0) goto stopped; if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, MSR_CTS)) goto stopped; if (tp->t_outq.c_cc <= tp->t_lowat) { if (ISSET(tp->t_state, TS_ASLEEP)) { CLR(tp->t_state, TS_ASLEEP); wakeup(&tp->t_outq); } selwakeup(&tp->t_wsel); if (tp->t_outq.c_cc == 0) goto stopped; } SET(tp->t_state, TS_BUSY); #ifdef COM_PXA2X0 /* Enable transmitter slow infrared mode. */ if (sc->sc_uarttype == COM_UART_PXA2X0 && ISSET(sc->sc_hwflags, COM_HW_SIR)) bus_space_write_1(iot, ioh, com_isr, ISR_SEND); #endif /* Enable transmit completion interrupts. */ if (!ISSET(sc->sc_ier, IER_ETXRDY)) { SET(sc->sc_ier, IER_ETXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { u_char buffer[128]; /* largest fifo */ int i, n; n = q_to_b(&tp->t_outq, buffer, min(sc->sc_fifolen, sizeof buffer)); for (i = 0; i < n; i++) { bus_space_write_1(iot, ioh, com_data, buffer[i]); } bzero(buffer, n); } else if (tp->t_outq.c_cc != 0) bus_space_write_1(iot, ioh, com_data, getc(&tp->t_outq)); out: splx(s); return; stopped: if (ISSET(sc->sc_ier, IER_ETXRDY)) { CLR(sc->sc_ier, IER_ETXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0 && ISSET(sc->sc_hwflags, COM_HW_SIR)) { int timo; /* Wait for empty transmit shift register. */ timo = 20000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TSRE) && --timo) delay(1); /* Enable receiver slow infrared mode. */ bus_space_write_1(iot, ioh, com_isr, ISR_RECV); } #endif } splx(s); } /* * Stop output on a line. */ int comstop(struct tty *tp, int flag) { int s; s = spltty(); if (ISSET(tp->t_state, TS_BUSY)) if (!ISSET(tp->t_state, TS_TTSTOP)) SET(tp->t_state, TS_FLUSH); splx(s); return 0; } void comdiag(void *arg) { struct com_softc *sc = arg; int overflows, floods; int s; s = spltty(); sc->sc_errors = 0; overflows = sc->sc_overflows; sc->sc_overflows = 0; floods = sc->sc_floods; sc->sc_floods = 0; splx(s); log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n", sc->sc_dev.dv_xname, overflows, overflows == 1 ? "" : "s", floods, floods == 1 ? "" : "s"); } void comsoft(void *arg) { struct com_softc *sc = (struct com_softc *)arg; struct tty *tp; u_char *ibufp; u_char *ibufend; int c; int s; static int lsrmap[8] = { 0, TTY_PE, TTY_FE, TTY_PE|TTY_FE, TTY_FE, TTY_PE|TTY_FE, TTY_FE, TTY_PE|TTY_FE }; if (sc == NULL || sc->sc_ibufp == sc->sc_ibuf) return; tp = sc->sc_tty; s = spltty(); ibufp = sc->sc_ibuf; ibufend = sc->sc_ibufp; if (ibufp == ibufend) { splx(s); return; } sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ? sc->sc_ibufs[1] : sc->sc_ibufs[0]; sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER; sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE; if (tp == NULL || !ISSET(tp->t_state, TS_ISOPEN)) { splx(s); return; } if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_mcr, MCR_RTS)) { /* XXX */ SET(sc->sc_mcr, MCR_RTS); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr); } splx(s); while (ibufp < ibufend) { c = *ibufp++; if (ISSET(*ibufp, LSR_OE)) { sc->sc_overflows++; if (sc->sc_errors++ == 0) timeout_add_sec(&sc->sc_diag_tmo, 60); } /* This is ugly, but fast. */ c |= lsrmap[(*ibufp++ & (LSR_BI|LSR_FE|LSR_PE)) >> 2]; (*linesw[tp->t_line].l_rint)(c, tp); } } #ifdef KGDB /* * If a line break is set, or data matches one of the characters * gdb uses to signal a connection, then start up kgdb. Just gobble * any other data. Done in a stand alone function because comintr * does tty stuff and we don't have one. */ int kgdbintr(void *arg) { struct com_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char lsr, data, msr, delta; if (!ISSET(sc->sc_hwflags, COM_HW_KGDB)) return(0); for (;;) { lsr = bus_space_read_1(iot, ioh, com_lsr); if (ISSET(lsr, LSR_RXRDY)) { do { data = bus_space_read_1(iot, ioh, com_data); if (data == 3 || data == '$' || data == '+' || ISSET(lsr, LSR_BI)) { kgdb_connect(1); data = 0; } lsr = bus_space_read_1(iot, ioh, com_lsr); } while (ISSET(lsr, LSR_RXRDY)); } if (ISSET(lsr, LSR_BI|LSR_FE|LSR_PE|LSR_OE)) printf("weird lsr %02x\n", lsr); msr = bus_space_read_1(iot, ioh, com_msr); if (msr != sc->sc_msr) { delta = msr ^ sc->sc_msr; sc->sc_msr = msr; if (ISSET(delta, MSR_DCD)) { if (!ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) { CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } } if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND)) return (1); } } #endif /* KGDB */ int comintr(void *arg) { struct com_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp; u_char lsr, data, msr, delta; if (!sc->sc_tty) return (0); /* Can't do squat. */ if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND)) return (0); tp = sc->sc_tty; for (;;) { lsr = bus_space_read_1(iot, ioh, com_lsr); if (ISSET(lsr, LSR_RXRDY)) { u_char *p = sc->sc_ibufp; softintr_schedule(sc->sc_si); do { data = bus_space_read_1(iot, ioh, com_data); if (ISSET(lsr, LSR_BI)) { #if defined(COM_CONSOLE) && defined(DDB) if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { if (db_console) Debugger(); goto next; } #endif data = 0; } if (p >= sc->sc_ibufend) { sc->sc_floods++; if (sc->sc_errors++ == 0) timeout_add_sec(&sc->sc_diag_tmo, 60); } else { *p++ = data; *p++ = lsr; if (p == sc->sc_ibufhigh && ISSET(tp->t_cflag, CRTSCTS)) { /* XXX */ CLR(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } #if defined(COM_CONSOLE) && defined(DDB) next: #endif lsr = bus_space_read_1(iot, ioh, com_lsr); } while (ISSET(lsr, LSR_RXRDY)); sc->sc_ibufp = p; } msr = bus_space_read_1(iot, ioh, com_msr); if (msr != sc->sc_msr) { delta = msr ^ sc->sc_msr; ttytstamp(tp, sc->sc_msr & MSR_CTS, msr & MSR_CTS, sc->sc_msr & MSR_DCD, msr & MSR_DCD); sc->sc_msr = msr; if (ISSET(delta, MSR_DCD)) { if (!ISSET(sc->sc_swflags, COM_SW_SOFTCAR) && (*linesw[tp->t_line].l_modem)(tp, ISSET(msr, MSR_DCD)) == 0) { CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } if (ISSET(delta & msr, MSR_CTS) && ISSET(tp->t_cflag, CRTSCTS)) { /* the line is up and we want to do rts/cts flow control */ (*linesw[tp->t_line].l_start)(tp); } } if (ISSET(lsr, LSR_TXRDY) && ISSET(tp->t_state, TS_BUSY)) { CLR(tp->t_state, TS_BUSY | TS_FLUSH); if (sc->sc_halt > 0) wakeup(&tp->t_outq); (*linesw[tp->t_line].l_start)(tp); } #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0 && ISSET(sc->sc_hwflags, COM_HW_SIR) && ISSET(lsr, LSR_TXRDY) && ISSET(lsr, LSR_TSRE)) bus_space_write_1(iot, ioh, com_isr, ISR_RECV); #endif if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND)) return (1); } } /* * The following functions are polled getc and putc routines, shared * by the console and kgdb glue. */ int com_common_getc(bus_space_tag_t iot, bus_space_handle_t ioh) { int s = splhigh(); u_char stat, c; #ifdef COM_PXA2X0 if (com_is_console(iot, comsiraddr)) bus_space_write_1(iot, ioh, com_isr, ISR_RECV); #endif /* Block until a character becomes available. */ while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) continue; c = bus_space_read_1(iot, ioh, com_data); /* Clear any interrupts generated by this transmission. */ stat = bus_space_read_1(iot, ioh, com_iir); splx(s); return (c); } void com_common_putc(bus_space_tag_t iot, bus_space_handle_t ioh, int c) { int s = spltty(); int timo; /* Wait for any pending transmission to finish. */ timo = 2000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) delay(1); #ifdef COM_PXA2X0 if (com_is_console(iot, comsiraddr)) bus_space_write_1(iot, ioh, com_isr, ISR_SEND); #endif bus_space_write_1(iot, ioh, com_data, (u_int8_t)(c & 0xff)); bus_space_barrier(iot, ioh, 0, COM_NPORTS, (BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE)); /* Wait for this transmission to complete. */ timo = 2000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) delay(1); #ifdef COM_PXA2X0 if (com_is_console(iot, comsiraddr)) { /* Wait for transmit shift register to become empty. */ timo = 20000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TSRE) && --timo) delay(1); bus_space_write_1(iot, ioh, com_isr, ISR_RECV); } #endif splx(s); } void cominit(bus_space_tag_t iot, bus_space_handle_t ioh, int rate, int frequency) { int s = splhigh(); u_char stat; bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB); rate = comspeed(frequency, rate); /* XXX not comdefaultrate? */ bus_space_write_1(iot, ioh, com_dlbl, rate); bus_space_write_1(iot, ioh, com_dlbh, rate >> 8); bus_space_write_1(iot, ioh, com_lcr, LCR_8BITS); bus_space_write_1(iot, ioh, com_mcr, MCR_DTR | MCR_RTS); #ifdef COM_PXA2X0 /* XXX */ bus_space_write_1(iot, ioh, com_ier, IER_EUART); /* Make sure they are off */ #else bus_space_write_1(iot, ioh, com_ier, 0); /* Make sure they are off */ #endif bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); stat = bus_space_read_1(iot, ioh, com_iir); splx(s); } #ifdef COM_CONSOLE void comcnprobe(struct consdev *cp) { bus_space_handle_t ioh; int found; if (comconsaddr == 0) return; if (bus_space_map(comconsiot, comconsaddr, COM_NPORTS, 0, &ioh)) return; found = comprobe1(comconsiot, ioh); bus_space_unmap(comconsiot, ioh, COM_NPORTS); if (!found) return; /* Locate the major number. */ for (commajor = 0; commajor < nchrdev; commajor++) if (cdevsw[commajor].d_open == comopen) break; /* Initialize required fields. */ cp->cn_dev = makedev(commajor, comconsunit); #if defined(COMCONSOLE) || !defined(__amd64__) cp->cn_pri = CN_HIGHPRI; #else cp->cn_pri = CN_LOWPRI; #endif } void comcninit(struct consdev *cp) { if (bus_space_map(comconsiot, comconsaddr, COM_NPORTS, 0, &comconsioh)) panic("comcninit: mapping failed"); if (comconsfreq == 0) comconsfreq = COM_FREQ; cominit(comconsiot, comconsioh, comconsrate, comconsfreq); comconsinit = 0; } int comcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag) { static struct consdev comcons = { NULL, NULL, comcngetc, comcnputc, comcnpollc, NULL, NODEV, CN_LOWPRI }; #ifndef __sparc64__ if (bus_space_map(iot, iobase, COM_NPORTS, 0, &comconsioh)) return ENOMEM; #endif cominit(iot, comconsioh, rate, frequency); cn_tab = &comcons; comconsiot = iot; comconsaddr = iobase; comconscflag = cflag; comconsfreq = frequency; comconsrate = rate; return (0); } int comcngetc(dev_t dev) { return (com_common_getc(comconsiot, comconsioh)); } /* * Console kernel output character routine. */ void comcnputc(dev_t dev, int c) { com_common_putc(comconsiot, comconsioh, c); } void comcnpollc(dev_t dev, int on) { } #endif /* COM_CONSOLE */ #ifdef KGDB int com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag) { #ifdef COM_CONSOLE if (iot == comconsiot && iobase == comconsaddr) { return (EBUSY); /* cannot share with console */ } #endif com_kgdb_iot = iot; com_kgdb_addr = iobase; if (bus_space_map(com_kgdb_iot, com_kgdb_addr, COM_NPORTS, 0, &com_kgdb_ioh)) panic("com_kgdb_attach: mapping failed"); /* XXX We currently don't respect KGDBMODE? */ cominit(com_kgdb_iot, com_kgdb_ioh, rate, frequency); kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL); kgdb_dev = 123; /* unneeded, only to satisfy some tests */ return (0); } /* ARGSUSED */ int com_kgdb_getc(void *arg) { return (com_common_getc(com_kgdb_iot, com_kgdb_ioh)); } /* ARGSUSED */ void com_kgdb_putc(void *arg, int c) { return (com_common_putc(com_kgdb_iot, com_kgdb_ioh, c)); } #endif /* KGDB */ #ifdef COM_PXA2X0 int com_is_console(bus_space_tag_t iot, bus_addr_t iobase) { if (comconsiot == iot && comconsaddr == iobase) return (1); #ifdef KGDB else if (com_kgdb_iot == iot && com_kgdb_addr == iobase) return (1); #endif return (0); } #endif /* COM_PXA2X0 */ void com_enable_debugport(struct com_softc *); void com_fifo_probe(struct com_softc *); #if defined(COM_CONSOLE) || defined(KGDB) void com_enable_debugport(sc) struct com_softc *sc; { int s; /* Turn on line break interrupt, set carrier. */ s = splhigh(); #ifdef KGDB SET(sc->sc_ier, IER_ERXRDY); #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0) sc->sc_ier |= IER_EUART | IER_ERXTOUT; #endif bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_ier, sc->sc_ier); #endif SET(sc->sc_mcr, MCR_DTR | MCR_RTS | MCR_IENABLE); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr); splx(s); } #endif /* COM_CONSOLE || KGDB */ void com_attach_subr(sc) struct com_softc *sc; { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_int8_t lcr; sc->sc_ier = 0; #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0) sc->sc_ier |= IER_EUART; #endif /* disable interrupts */ bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); #ifdef COM_CONSOLE if (sc->sc_iot == comconsiot && sc->sc_iobase == comconsaddr) { comconsattached = 1; delay(10000); /* wait for output to finish */ SET(sc->sc_hwflags, COM_HW_CONSOLE); SET(sc->sc_swflags, COM_SW_SOFTCAR); } #endif /* * Probe for all known forms of UART. */ lcr = bus_space_read_1(iot, ioh, com_lcr); bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); bus_space_write_1(iot, ioh, com_efr, 0); bus_space_write_1(iot, ioh, com_lcr, 0); bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE); delay(100); /* * Skip specific probes if attachment code knows it already. */ if (sc->sc_uarttype == COM_UART_UNKNOWN) switch (bus_space_read_1(iot, ioh, com_iir) >> 6) { case 0: sc->sc_uarttype = COM_UART_16450; break; case 2: sc->sc_uarttype = COM_UART_16550; break; case 3: sc->sc_uarttype = COM_UART_16550A; break; default: sc->sc_uarttype = COM_UART_UNKNOWN; break; } if (sc->sc_uarttype == COM_UART_16550A) { /* Probe for ST16650s */ bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); if (bus_space_read_1(iot, ioh, com_efr) == 0) { sc->sc_uarttype = COM_UART_ST16650; } else { bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); if (bus_space_read_1(iot, ioh, com_efr) == 0) sc->sc_uarttype = COM_UART_ST16650V2; } } #if 0 /* until com works with large FIFOs */ if (sc->sc_uarttype == COM_UART_ST16650V2) { /* Probe for XR16850s */ u_int8_t dlbl, dlbh; /* Enable latch access and get the current values. */ bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); dlbl = bus_space_read_1(iot, ioh, com_dlbl); dlbh = bus_space_read_1(iot, ioh, com_dlbh); /* Zero out the latch divisors */ bus_space_write_1(iot, ioh, com_dlbl, 0); bus_space_write_1(iot, ioh, com_dlbh, 0); if (bus_space_read_1(iot, ioh, com_dlbh) == 0x10) { sc->sc_uarttype = COM_UART_XR16850; sc->sc_uartrev = bus_space_read_1(iot, ioh, com_dlbl); } /* Reset to original. */ bus_space_write_1(iot, ioh, com_dlbl, dlbl); bus_space_write_1(iot, ioh, com_dlbh, dlbh); } #endif if (sc->sc_uarttype == COM_UART_16550A) { /* Probe for TI16750s */ bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_ENABLE_64BYTE); if ((bus_space_read_1(iot, ioh, com_iir) >> 5) == 7) { #if 0 bus_space_write_1(iot, ioh, com_lcr, 0); if ((bus_space_read_1(iot, ioh, com_iir) >> 5) == 6) #endif sc->sc_uarttype = COM_UART_TI16750; } bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE); } /* Reset the LCR (latch access is probably enabled). */ bus_space_write_1(iot, ioh, com_lcr, lcr); if (sc->sc_uarttype == COM_UART_16450) { /* Probe for 8250 */ u_int8_t scr0, scr1, scr2; scr0 = bus_space_read_1(iot, ioh, com_scratch); bus_space_write_1(iot, ioh, com_scratch, 0xa5); scr1 = bus_space_read_1(iot, ioh, com_scratch); bus_space_write_1(iot, ioh, com_scratch, 0x5a); scr2 = bus_space_read_1(iot, ioh, com_scratch); bus_space_write_1(iot, ioh, com_scratch, scr0); if ((scr1 != 0xa5) || (scr2 != 0x5a)) sc->sc_uarttype = COM_UART_8250; } /* * Print UART type and initialize ourself. */ switch (sc->sc_uarttype) { case COM_UART_UNKNOWN: printf(": unknown uart\n"); break; case COM_UART_8250: printf(": ns8250, no fifo\n"); break; case COM_UART_16450: printf(": ns16450, no fifo\n"); break; case COM_UART_16550: printf(": ns16550, no working fifo\n"); break; case COM_UART_16550A: if (sc->sc_fifolen == 0) sc->sc_fifolen = 16; printf(": ns16550a, %d byte fifo\n", sc->sc_fifolen); SET(sc->sc_hwflags, COM_HW_FIFO); break; #ifdef COM_PXA2X0 case COM_UART_PXA2X0: printf(": pxa2x0, 32 byte fifo"); SET(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 32; if (sc->sc_iobase == comsiraddr) { SET(sc->sc_hwflags, COM_HW_SIR); printf(" (SIR)"); } printf("\n"); break; #endif case COM_UART_ST16650: printf(": st16650, no working fifo\n"); break; case COM_UART_ST16650V2: if (sc->sc_fifolen == 0) sc->sc_fifolen = 32; printf(": st16650, %d byte fifo\n", sc->sc_fifolen); SET(sc->sc_hwflags, COM_HW_FIFO); break; case COM_UART_ST16C654: printf(": st16c654, 64 byte fifo\n"); SET(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 64; break; case COM_UART_TI16750: printf(": ti16750, 64 byte fifo\n"); SET(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 64; break; #if 0 case COM_UART_XR16850: printf(": xr16850 (rev %d), 128 byte fifo\n", sc->sc_uartrev); SET(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 128; break; #ifdef COM_UART_OX16C950 case COM_UART_OX16C950: printf(": ox16c950 (rev %d), 128 byte fifo\n", sc->sc_uartrev); SET(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 128; break; #endif #endif default: panic("comattach: bad fifo type"); } #ifdef KGDB /* * Allow kgdb to "take over" this port. If this is * the kgdb device, it has exclusive use. */ if (iot == com_kgdb_iot && sc->sc_iobase == com_kgdb_addr && !ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { printf("%s: kgdb\n", sc->sc_dev.dv_xname); SET(sc->sc_hwflags, COM_HW_KGDB); } #endif /* KGDB */ #if defined(COM_CONSOLE) || defined(KGDB) if (!ISSET(sc->sc_hwflags, COM_HW_CONSOLE|COM_HW_KGDB)) #endif com_fifo_probe(sc); if (sc->sc_fifolen == 0) { CLR(sc->sc_hwflags, COM_HW_FIFO); sc->sc_fifolen = 1; } /* clear and disable fifo */ bus_space_write_1(iot, ioh, com_fifo, FIFO_RCV_RST | FIFO_XMT_RST); (void)bus_space_read_1(iot, ioh, com_data); bus_space_write_1(iot, ioh, com_fifo, 0); sc->sc_mcr = 0; bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); #ifdef COM_CONSOLE if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { int maj; /* locate the major number */ for (maj = 0; maj < nchrdev; maj++) if (cdevsw[maj].d_open == comopen) break; if (maj < nchrdev && cn_tab->cn_dev == NODEV) cn_tab->cn_dev = makedev(maj, sc->sc_dev.dv_unit); printf("%s: console\n", sc->sc_dev.dv_xname); } #endif timeout_set(&sc->sc_diag_tmo, comdiag, sc); timeout_set(&sc->sc_dtr_tmo, com_raisedtr, sc); sc->sc_si = softintr_establish(IPL_TTY, comsoft, sc); if (sc->sc_si == NULL) panic("%s: can't establish soft interrupt", sc->sc_dev.dv_xname); /* * If there are no enable/disable functions, assume the device * is always enabled. */ if (!sc->enable) sc->enabled = 1; #if defined(COM_CONSOLE) || defined(KGDB) if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE|COM_HW_KGDB)) com_enable_debugport(sc); #endif } void com_fifo_probe(struct com_softc *sc) { bus_space_handle_t ioh = sc->sc_ioh; bus_space_tag_t iot = sc->sc_iot; u_int8_t fifo, ier; int timo, len; if (!ISSET(sc->sc_hwflags, COM_HW_FIFO)) return; ier = 0; #ifdef COM_PXA2X0 if (sc->sc_uarttype == COM_UART_PXA2X0) ier |= IER_EUART; #endif bus_space_write_1(iot, ioh, com_ier, ier); bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB); bus_space_write_1(iot, ioh, com_dlbl, 3); bus_space_write_1(iot, ioh, com_dlbh, 0); bus_space_write_1(iot, ioh, com_lcr, LCR_PNONE | LCR_8BITS); bus_space_write_1(iot, ioh, com_mcr, MCR_LOOPBACK); fifo = FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST; if (sc->sc_uarttype == COM_UART_TI16750) fifo |= FIFO_ENABLE_64BYTE; bus_space_write_1(iot, ioh, com_fifo, fifo); for (len = 0; len < 256; len++) { bus_space_write_1(iot, ioh, com_data, (len + 1)); timo = 2000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) delay(1); if (!timo) break; } delay(100); for (len = 0; len < 256; len++) { timo = 2000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY) && --timo) delay(1); if (!timo || bus_space_read_1(iot, ioh, com_data) != (len + 1)) break; } /* For safety, always use the smaller value. */ if (sc->sc_fifolen > len) { printf("%s: probed fifo depth: %d bytes\n", sc->sc_dev.dv_xname, len); sc->sc_fifolen = len; } }