/* $OpenBSD: elink3reg.h,v 1.11 1999/12/27 21:39:07 fgsch Exp $ */ /* $NetBSD: elink3reg.h,v 1.13 1997/04/27 09:42:34 veego Exp $ */ /* * Copyright (c) 1995 Herb Peyerl * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Herb Peyerl. * 4. The name of Herb Peyerl may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * These define the EEPROM data structure. They are used in the probe * function to verify the existance of the adapter after having sent * the ID_Sequence. * * There are others but only the ones we use are defined here. */ #define EEPROM_NODE_ADDR_0 0x0 /* Word */ #define EEPROM_NODE_ADDR_1 0x1 /* Word */ #define EEPROM_NODE_ADDR_2 0x2 /* Word */ #define EEPROM_PROD_ID 0x3 /* 0x9[0-f]50 */ #define EEPROM_MFG_ID 0x7 /* 0x6d50 */ #define EEPROM_ADDR_CFG 0x8 /* Base addr */ #define EEPROM_RESOURCE_CFG 0x9 /* IRQ. Bits 12-15 */ #define EEPROM_OEM_ADDR0 0xa #define EEPROM_PNP 0x13 /* PNP mode and such? */ /* * These are the registers for the 3Com 3c509 and their bit patterns when * applicable. They have been taken out the the "EtherLink III Parallel * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual * from 3com. */ #define EP_COMMAND 0x0e /* Write. BASE+0x0e is always a command reg. */ #define EP_STATUS 0x0e /* Read. BASE+0x0e is always status reg. */ #define EP_WINDOW 0x0f /* Read. BASE+0x0f is always window reg. */ /* * Window 0 registers. Setup. */ /* Write */ #define EP_W0_EEPROM_DATA 0x0c #define EP_W0_EEPROM_COMMAND 0x0a #define EP_W0_RESOURCE_CFG 0x08 #define EP_W0_ADDRESS_CFG 0x06 #define EP_W0_CONFIG_CTRL 0x04 /* Read */ #define EP_W0_PRODUCT_ID 0x02 #define EP_W0_MFG_ID 0x00 /* * Window 1 registers. Operating Set. */ /* Write */ #define EP_W1_TX_PIO_WR_2 0x02 #define EP_W1_TX_PIO_WR_1 0x00 /* Read */ #define EP_W1_FREE_TX 0x0c #define EP_W1_TX_STATUS 0x0b /* byte */ #define EP_W1_TIMER 0x0a /* byte */ #define EP_W1_RX_STATUS 0x08 #define EP_W1_RX_PIO_RD_2 0x02 #define EP_W1_RX_PIO_RD_1 0x00 /* * Window 2 registers. Station Address Setup/Read */ /* Read/Write */ #define EP_W2_RECVMASK_0 0x06 #define EP_W2_ADDR_5 0x05 #define EP_W2_ADDR_4 0x04 #define EP_W2_ADDR_3 0x03 #define EP_W2_ADDR_2 0x02 #define EP_W2_ADDR_1 0x01 #define EP_W2_ADDR_0 0x00 /* * Window 3 registers. FIFO Management. */ /* Read */ #define EP_W3_FREE_TX 0x0c #define EP_W3_FREE_RX 0x0a /* Read/Write, at least on busmastering cards. */ #define EP_W3_INTERNAL_CONFIG 0x00 /* 32 bits */ #define EP_W3_OTHER_INT 0x04 /* 8 bits */ #define EP_W3_PIO_RESERVED 0x05 /* 8 bits */ #define EP_W3_MAC_CONTROL 0x06 /* 16 bits */ #define EP_W3_RESET_OPTIONS 0x08 /* 16 bits */ /* * Window 4 registers. Diagnostics. */ /* Read/Write */ #define EP_W4_MEDIA_TYPE 0x0a #define EP_W4_CTRLR_STATUS 0x08 #define EP_W4_NET_DIAG 0x06 #define EP_W4_FIFO_DIAG 0x04 #define EP_W4_HOST_DIAG 0x02 #define EP_W4_TX_DIAG 0x00 /* * Window 5 Registers. Results and Internal status. */ /* Read */ #define EP_W5_READ_0_MASK 0x0c #define EP_W5_INTR_MASK 0x0a #define EP_W5_RX_FILTER 0x08 #define EP_W5_RX_EARLY_THRESH 0x06 #define EP_W5_TX_AVAIL_THRESH 0x02 #define EP_W5_TX_START_THRESH 0x00 /* * Window 6 registers. Statistics. */ /* Read/Write */ #define TX_TOTAL_OK 0x0c #define RX_TOTAL_OK 0x0a #define TX_DEFERRALS 0x08 #define RX_FRAMES_OK 0x07 #define TX_FRAMES_OK 0x06 #define RX_OVERRUNS 0x05 #define TX_COLLISIONS 0x04 #define TX_AFTER_1_COLLISION 0x03 #define TX_AFTER_X_COLLISIONS 0x02 #define TX_NO_SQE 0x01 #define TX_CD_LOST 0x00 /* * Window 7 registers. * Address and length for a single bus-master DMA transfer. */ #define EP_W7_MASTER_ADDDRES 0x00 #define EP_W7_RX_ERROR 0x04 #define EP_W7_MASTER_LEN 0x06 #define EP_W7_RX_STATUS 0x08 #define EP_W7_TIMER 0x0a #define EP_W7_TX_STATUS 0x0b #define EP_W7_MASTER_STATUS 0x0c /* * Window 7 registers. * Address and length for a single bus-master DMA transfer. */ #define EP_W7_MASTER_ADDDRES 0x00 #define EP_W7_RX_ERROR 0x04 #define EP_W7_MASTER_LEN 0x06 #define EP_W7_RX_STATUS 0x08 #define EP_W7_TIMER 0x0a #define EP_W7_TX_STATUS 0x0b #define EP_W7_MASTER_STATUS 0x0c /* * Register definitions. */ /* * Command register. All windows. * * 16 bit register. * 15-11: 5-bit code for command to be executed. * 10-0: 11-bit arg if any. For commands with no args; * this can be set to anything. */ #define GLOBAL_RESET (u_short) 0x0000 /* Wait at least 1ms after issuing */ #define WINDOW_SELECT (u_short) (0x1<<11) #define START_TRANSCEIVER (u_short) (0x2<<11) /* Read ADDR_CFG reg to determine whether this is needed. If so; wait 800 uSec before using trans- ceiver. */ #define RX_DISABLE (u_short) (0x3<<11) /* state disabled on power-up */ #define RX_ENABLE (u_short) (0x4<<11) #define RX_RESET (u_short) (0x5<<11) #define RX_DISCARD_TOP_PACK (u_short) (0x8<<11) #define TX_ENABLE (u_short) (0x9<<11) #define TX_DISABLE (u_short) (0xa<<11) #define TX_RESET (u_short) (0xb<<11) #define REQ_INTR (u_short) (0xc<<11) /* * The following C_* acknowledge the various interrupts. * Some of them don't do anything. See the manual. */ #define ACK_INTR (u_short) (0x6800) # define C_INTR_LATCH (u_short) (ACK_INTR|0x01) # define C_CARD_FAILURE (u_short) (ACK_INTR|0x02) # define C_TX_COMPLETE (u_short) (ACK_INTR|0x04) # define C_TX_AVAIL (u_short) (ACK_INTR|0x08) # define C_RX_COMPLETE (u_short) (ACK_INTR|0x10) # define C_RX_EARLY (u_short) (ACK_INTR|0x20) # define C_INT_RQD (u_short) (ACK_INTR|0x40) # define C_UPD_STATS (u_short) (ACK_INTR|0x80) #define SET_INTR_MASK (u_short) (0x0e<<11) /* busmastering-cards only? */ #define STATUS_ENABLE (u_short) (0x0f<<11) #define SET_RD_0_MASK (u_short) (0x0f<<11) #define SET_RX_FILTER (u_short) (0x10<<11) # define FIL_INDIVIDUAL (u_short) (0x01) # define FIL_MULTICAST (u_short) (0x02) # define FIL_BRDCST (u_short) (0x04) # define FIL_PROMISC (u_short) (0x08) #define SET_RX_EARLY_THRESH (u_short) (0x11<<11) #define SET_TX_AVAIL_THRESH (u_short) (0x12<<11) #define SET_TX_START_THRESH (u_short) (0x13<<11) #define START_DMA (u_short) (0x14<<11) /* busmaster-only */ # define START_DMA_TX (START_DMA | 0x0)) /* busmaster-only */ # define START_DMA_RX (START_DMA | 0x1) /* busmaster-only */ #define STATS_ENABLE (u_short) (0x15<<11) #define STATS_DISABLE (u_short) (0x16<<11) #define STOP_TRANSCEIVER (u_short) (0x17<<11) /* Only on adapters that support power management: */ #define POWERUP (u_short) (0x1b<<11) #define POWERDOWN (u_short) (0x1c<<11) #define POWERAUTO (u_short) (0x1d<<11) /* * Command parameter that disables threshold interrupts * PIO (3c509) cards use 2044. The fifo word-oriented and 2044--2047 work. * "busmastering" cards need 8188. * The implicit two-bit upshift done by busmastering cards means * a value of 2047 disables threshold interrupts on both. */ #define EP_THRESH_DISABLE 2047 /* * Status register. All windows. * * 15-13: Window number(0-7). * 12: Command_in_progress. * 11: reserved / DMA in progress on busmaster cards. * 10: reserved. * 9: reserved. * 8: reserved / DMA done on busmaster cards. * 7: Update Statistics. * 6: Interrupt Requested. * 5: RX Early. * 4: RX Complete. * 3: TX Available. * 2: TX Complete. * 1: Adapter Failure. * 0: Interrupt Latch. */ #define S_INTR_LATCH (u_short) (0x0001) #define S_CARD_FAILURE (u_short) (0x0002) #define S_TX_COMPLETE (u_short) (0x0004) #define S_TX_AVAIL (u_short) (0x0008) #define S_RX_COMPLETE (u_short) (0x0010) #define S_RX_EARLY (u_short) (0x0020) #define S_INT_RQD (u_short) (0x0040) #define S_UPD_STATS (u_short) (0x0080) #define S_DMA_DONE (u_short) (0x0100) /* DMA cards only */ #define S_DOWN_COMPLETE (u_short) (0x0200) /* DMA cards only */ #define S_UP_COMPLETE (u_short) (0x0400) /* DMA cards only */ #define S_DMA_IN_PROGRESS (u_short) (0x0800) /* DMA cards only */ #define S_COMMAND_IN_PROGRESS (u_short) (0x1000) /* * FIFO Registers. RX Status. * * 15: Incomplete or FIFO empty. * 14: 1: Error in RX Packet 0: Incomplete or no error. * 14-11: Type of error. [14-11] * 1000 = Overrun. * 1011 = Run Packet Error. * 1100 = Alignment Error. * 1101 = CRC Error. * 1001 = Oversize Packet Error (>1514 bytes) * 0010 = Dribble Bits. * (all other error codes, no errors.) * * 10-0: RX Bytes (0-1514) */ #define ERR_INCOMPLETE (u_short) (0x8000) #define ERR_RX (u_short) (0x4000) #define ERR_MASK (u_short) (0x7800) #define ERR_OVERRUN (u_short) (0x4000) #define ERR_RUNT (u_short) (0x5800) #define ERR_ALIGNMENT (u_short) (0x6000) #define ERR_CRC (u_short) (0x6800) #define ERR_OVERSIZE (u_short) (0x4800) #define ERR_DRIBBLE (u_short) (0x1000) /* * TX Status * * Reports the transmit status of a completed transmission. Writing this * register pops the transmit completion stack. * * Window 1/Port 0x0b. * * 7: Complete * 6: Interrupt on successful transmission requested. * 5: Jabber Error (TP Only, TX Reset required. ) * 4: Underrun (TX Reset required. ) * 3: Maximum Collisions. * 2: TX Status Overflow. * 1-0: Undefined. * */ #define TXS_COMPLETE 0x80 #define TXS_INTR_REQ 0x40 #define TXS_JABBER 0x20 #define TXS_UNDERRUN 0x10 #define TXS_MAX_COLLISION 0x08 #define TXS_STATUS_OVERFLOW 0x04 /* * RX status * Window 1/Port 0x08. */ #define RX_BYTES_MASK (u_short) (0x07ff) /* * Internal Config and MAC control (Window 3) * Window 3 / Port 0: 32-bit internal config register: * bits 0-2: fifo buffer ram size * 3: ram width (word/byte) (ro) * 4-5: ram speed * 6-7: rom size * 8-15: reserved * * 16-17: ram split (5:3, 3:1, or 1:1). * 18-19: reserved * 20-22: selected media type * 21: unused * 24: (nonvolatile) driver should autoselect media * 25-31: reseerved * * The low-order 16 bits should generally not be changed by software. * Offsets defined for two 16-bit words, to help out 16-bit busses. */ #define CONFIG_RAMSIZE (u_short) 0x0007 #define CONFIG_RAMSIZE_SHIFT (u_short) 0 #define CONFIG_RAMWIDTH (u_short) 0x0008 #define CONFIG_RAMWIDTH_SHIFT (u_short) 3 #define CONFIG_RAMSPEED (u_short) 0x0030 #define CONFIG_RAMSPEED_SHIFT (u_short) 4 #define CONFIG_ROMSIZE (u_short) 0x00c0 #define CONFIG_ROMSIZE_SHIFT (u_short) 6 /* Window 3/port 2 */ #define CONFIG_RAMSPLIT (u_short) 0x0003 #define CONFIG_RAMSPLIT_SHIFT (u_short) 0 #define CONFIG_MEDIAMASK (u_short) 0x0070 #define CONFIG_MEDIAMASK_SHIFT (u_short) 4 /* Active media in EP_W3_RESET_OPTIONS mediamask bits */ #define EPMEDIA_10BASE_T (u_short) 0x00 #define EPMEDIA_AUI (u_short) 0x01 #define EPMEDIA_RESV1 (u_short) 0x02 #define EPMEDIA_10BASE_2 (u_short) 0x03 #define EPMEDIA_100BASE_TX (u_short) 0x04 #define EPMEDIA_100BASE_FX (u_short) 0x05 #define EPMEDIA_MII (u_short) 0x06 #define EPMEDIA_100BASE_T4 (u_short) 0x07 #define CONFIG_AUTOSELECT (u_short) 0x0100 #define CONFIG_AUTOSELECT_SHIFT (u_short) 8 /* * RESET_OPTIONS (Window 4, on Demon/Vortex/Bomerang only) * also mapped to PCI configuration space on PCI adaptors. * * (same register as Vortex EP_W3_RESET_OPTIONS, mapped to pci-config space) */ #define EP_PCI_100BASE_T4 (1<<0) #define EP_PCI_100BASE_TX (1<<1) #define EP_PCI_100BASE_FX (1<<2) #define EP_PCI_10BASE_T (1<<3) # define EP_PCI_UTP EP_PCI_10BASE_T #define EP_PCI_BNC (1<<4) #define EP_PCI_AUI (1<<5) #define EP_PCI_100BASE_MII (1<<6) #define EP_PCI_INTERNAL_VCO (1<<8) /* * FIFO Status (Window 4) * * Supports FIFO diagnostics * * Window 4/Port 0x04.1 * * 15: 1=RX receiving (RO). Set when a packet is being received * into the RX FIFO. * 14: Reserved * 13: 1=RX underrun (RO). Generates Adapter Failure interrupt. * Requires RX Reset or Global Reset command to recover. * It is generated when you read past the end of a packet - * reading past what has been received so far will give bad * data. * 12: 1=RX status overrun (RO). Set when there are already 8 * packets in the RX FIFO. While this bit is set, no additional * packets are received. Requires no action on the part of * the host. The condition is cleared once a packet has been * read out of the RX FIFO. * 11: 1=RX overrun (RO). Set when the RX FIFO is full (there * may not be an overrun packet yet). While this bit is set, * no additional packets will be received (some additional * bytes can still be pending between the wire and the RX * FIFO). Requires no action on the part of the host. The * condition is cleared once a few bytes have been read out * from the RX FIFO. * 10: 1=TX overrun (RO). Generates adapter failure interrupt. * Requires TX Reset or Global Reset command to recover. * Disables Transmitter. * 9-8: Unassigned. * 7-0: Built in self test bits for the RX and TX FIFO's. */ #define FIFOS_RX_RECEIVING (u_short) 0x8000 #define FIFOS_RX_UNDERRUN (u_short) 0x2000 #define FIFOS_RX_STATUS_OVERRUN (u_short) 0x1000 #define FIFOS_RX_OVERRUN (u_short) 0x0800 #define FIFOS_TX_OVERRUN (u_short) 0x0400 /* * ISA/eisa CONFIG_CNTRL media-present bits. */ #define EP_W0_CC_AUI (1<<13) #define EP_W0_CC_BNC (1<<12) #define EP_W0_CC_UTP (1<<9) /* EEPROM state flags/commands */ #define EEPROM_BUSY (1<<15) #define EEPROM_TST_MODE (1<<14) #define READ_EEPROM (1<<7) /* window 4, MEDIA_STATUS bits */ #define SQE_ENABLE 0x08 /* Enables SQE on AUI ports */ #define JABBER_GUARD_ENABLE 0x40 #define LINKBEAT_ENABLE 0x80 #define ENABLE_UTP (JABBER_GUARD_ENABLE|LINKBEAT_ENABLE) #define DISABLE_UTP 0x0 #define LINKBEAT_DETECT 0x800 /* * ep_connectors softc media-preset bitflags */ #define EPC_AUI 0x01 #define EPC_BNC 0x02 #define EPC_RESERVED 0x04 #define EPC_UTP 0x08 #define EPC_100TX 0x10 #define EPC_100FX 0x20 #define EPC_MII 0x40 #define EPC_100T4 0x80 /* * Misc defines for various things. */ #define TAG_ADAPTER 0xd0 #define ACTIVATE_ADAPTER_TO_CONFIG 0xff #define ENABLE_DRQ_IRQ 0x0001 #define MFG_ID 0x506d /* `TCM' */ #define PROD_ID_3C509 0x5090 /* 509[0-f] */ #define GO_WINDOW(x) bus_space_write_2(sc->sc_iot, \ sc->sc_ioh, EP_COMMAND, WINDOW_SELECT|x) /* Used to probe for large-packet support. */ #define EP_LARGEWIN_PROBE EP_THRESH_DISABLE #define EP_LARGEWIN_MASK 0xffc