/* $OpenBSD: i8042reg.h,v 1.2 1996/10/31 01:01:31 niklas Exp $ */ /* $NetBSD: i8042reg.h,v 1.6 1995/04/21 09:16:16 mycroft Exp $ */ #define KBSTATP 0x64 /* kbd controller status port (I) */ #define KBS_DIB 0x01 /* kbd data in buffer */ #define KBS_IBF 0x02 /* kbd input buffer low */ #define KBS_WARM 0x04 /* kbd input buffer low */ #define KBS_OCMD 0x08 /* kbd output buffer has command */ #define KBS_NOSEC 0x10 /* kbd security lock not engaged */ #define KBS_TERR 0x20 /* kbd transmission error */ #define KBS_RERR 0x40 /* kbd receive error */ #define KBS_PERR 0x80 /* kbd parity error */ #define KBCMDP 0x64 /* kbd controller port (O) */ #define KBC_RAMREAD 0x20 /* read from RAM */ #define KBC_RAMWRITE 0x60 /* write to RAM */ #define KBC_AUXDISABLE 0xa7 /* disable auxiliary port */ #define KBC_AUXENABLE 0xa8 /* enable auxiliary port */ #define KBC_AUXTEST 0xa9 /* test auxiliary port */ #define KBC_KBDECHO 0xd2 /* echo to keyboard port */ #define KBC_AUXECHO 0xd3 /* echo to auxiliary port */ #define KBC_AUXWRITE 0xd4 /* write to auxiliary port */ #define KBC_SELFTEST 0xaa /* start self-test */ #define KBC_KBDTEST 0xab /* test keyboard port */ #define KBC_KBDDISABLE 0xad /* disable keyboard port */ #define KBC_KBDENABLE 0xae /* enable keyboard port */ #define KBC_PULSE0 0xfe /* pulse output bit 0 */ #define KBC_PULSE1 0xfd /* pulse output bit 1 */ #define KBC_PULSE2 0xfb /* pulse output bit 2 */ #define KBC_PULSE3 0xf7 /* pulse output bit 3 */ #define KBDATAP 0x60 /* kbd data port (I) */ #define KBOUTP 0x60 /* kbd data port (O) */ #define K_RDCMDBYTE 0x20 #define K_LDCMDBYTE 0x60 #define KC8_TRANS 0x40 /* convert to old scan codes */ #define KC8_MDISABLE 0x20 /* disable mouse */ #define KC8_KDISABLE 0x10 /* disable keyboard */ #define KC8_IGNSEC 0x08 /* ignore security lock */ #define KC8_CPU 0x04 /* exit from protected mode reset */ #define KC8_MENABLE 0x02 /* enable mouse interrupt */ #define KC8_KENABLE 0x01 /* enable keyboard interrupt */ #define CMDBYTE (KC8_TRANS|KC8_CPU|KC8_MENABLE|KC8_KENABLE)