/* $OpenBSD: if_wi_ieee.h,v 1.10 2002/06/25 02:03:02 millert Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * From: if_wavelan_ieee.h,v 1.5.2.1 2001/07/04 00:12:34 brooks Exp $ */ #ifndef _IF_WI_IEEE_H #define _IF_WI_IEEE_H #pragma pack(1) /* * This header defines a simple command interface to the FreeBSD * WaveLAN/IEEE driver (wi) driver, which is used to set certain * device-specific parameters which can't be easily managed through * ifconfig(8). No, sysctl(2) is not the answer. I said a _simple_ * interface, didn't I. */ #ifndef SIOCSWAVELAN #ifdef __FreeBSD__ #define SIOCSWAVELAN SIOCSIFGENERIC #else /* !__FreeBSD__ */ #define SIOCSWAVELAN SIOCSIFASYNCMAP #endif /* __FreeBSD__ */ #endif #ifndef SIOCGWAVELAN #ifdef __FreeBSD__ #define SIOCGWAVELAN SIOCGIFGENERIC #else /* !__FreeBSD__ */ #define SIOCGWAVELAN SIOCGIFASYNCMAP #endif /* __FreeBSD__ */ #endif /* * Technically I don't think there's a limit to a record * length. The largest record is the one that contains the CIS * data, which is 240 words long, so 256 should be a safe * value. */ #define WI_MAX_DATALEN 512 struct wi_req { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_val[WI_MAX_DATALEN]; }; /* * Private LTV records (interpreted only by the driver). This is * a minor kludge to allow reading the interface statistics from * the driver. */ #define WI_RID_IFACE_STATS 0x0100 #define WI_RID_MGMT_XMIT 0x0200 #define WI_RID_MONITOR_MODE 0x0500 struct wi_80211_hdr { u_int16_t frame_ctl; u_int16_t dur_id; u_int8_t addr1[6]; u_int8_t addr2[6]; u_int8_t addr3[6]; u_int16_t seq_ctl; u_int8_t addr4[6]; }; #define WI_FCTL_VERS 0x0002 #define WI_FCTL_FTYPE 0x000C #define WI_FCTL_STYPE 0x00F0 #define WI_FCTL_TODS 0x0100 #define WI_FCTL_FROMDS 0x0200 #define WI_FCTL_MOREFRAGS 0x0400 #define WI_FCTL_RETRY 0x0800 #define WI_FCTL_PM 0x1000 #define WI_FCTL_MOREDATA 0x2000 #define WI_FCTL_WEP 0x4000 #define WI_FCTL_ORDER 0x8000 #define WI_FTYPE_MGMT 0x0000 #define WI_FTYPE_CTL 0x0004 #define WI_FTYPE_DATA 0x0008 #define WI_STYPE_MGMT_ASREQ 0x0000 /* association request */ #define WI_STYPE_MGMT_ASRESP 0x0010 /* association response */ #define WI_STYPE_MGMT_REASREQ 0x0020 /* reassociation request */ #define WI_STYPE_MGMT_REASRESP 0x0030 /* reassociation response */ #define WI_STYPE_MGMT_PROBEREQ 0x0040 /* probe request */ #define WI_STYPE_MGMT_PROBERESP 0x0050 /* probe response */ #define WI_STYPE_MGMT_BEACON 0x0080 /* beacon */ #define WI_STYPE_MGMT_ATIM 0x0090 /* announcement traffic ind msg */ #define WI_STYPE_MGMT_DISAS 0x00A0 /* disassociation */ #define WI_STYPE_MGMT_AUTH 0x00B0 /* authentication */ #define WI_STYPE_MGMT_DEAUTH 0x00C0 /* deauthentication */ #define WI_STYPE_CTL_PSPOLL 0x00A0 #define WI_STYPE_CTL_RTS 0x00B0 #define WI_STYPE_CTL_CTS 0x00C0 #define WI_STYPE_CTL_ACK 0x00D0 #define WI_STYPE_CTL_CFEND 0x00E0 #define WI_STYPE_CTL_CFENDACK 0x00F0 struct wi_mgmt_hdr { u_int16_t frame_ctl; u_int16_t duration; u_int8_t dst_addr[6]; u_int8_t src_addr[6]; u_int8_t bssid[6]; u_int16_t seq_ctl; }; struct wi_counters { u_int32_t wi_tx_unicast_frames; u_int32_t wi_tx_multicast_frames; u_int32_t wi_tx_fragments; u_int32_t wi_tx_unicast_octets; u_int32_t wi_tx_multicast_octets; u_int32_t wi_tx_deferred_xmits; u_int32_t wi_tx_single_retries; u_int32_t wi_tx_multi_retries; u_int32_t wi_tx_retry_limit; u_int32_t wi_tx_discards; u_int32_t wi_rx_unicast_frames; u_int32_t wi_rx_multicast_frames; u_int32_t wi_rx_fragments; u_int32_t wi_rx_unicast_octets; u_int32_t wi_rx_multicast_octets; u_int32_t wi_rx_fcs_errors; u_int32_t wi_rx_discards_nobuf; u_int32_t wi_tx_discards_wrong_sa; u_int32_t wi_rx_WEP_cant_decrypt; u_int32_t wi_rx_msg_in_msg_frags; u_int32_t wi_rx_msg_in_bad_msg_frags; }; /* * These are all the LTV record types that we can read or write * from the WaveLAN. Not all of them are temendously useful, but I * list as many as I know about here for completeness. */ #define WI_RID_DNLD_BUF 0xFD01 #define WI_RID_MEMSZ 0xFD02 /* memory size info (Lucent) */ #define WI_RID_PRI_IDENTITY 0xFD02 /* primary firmware ident (PRISM2) */ #define WI_RID_DOMAINS 0xFD11 /* List of intended regulatory domains */ #define WI_RID_CIS 0xFD13 /* CIS info */ #define WI_RID_COMMQUAL 0xFD43 /* Communications quality */ #define WI_RID_SCALETHRESH 0xFD46 /* Actual system scale thresholds */ #define WI_RID_PCF 0xFD87 /* PCF info */ /* * Network parameters, static configuration entities. */ #define WI_RID_PORTTYPE 0xFC00 /* Connection control characteristics */ #define WI_RID_MAC_NODE 0xFC01 /* MAC address of this station */ #define WI_RID_DESIRED_SSID 0xFC02 /* Service Set ID for connection */ #define WI_RID_OWN_CHNL 0xFC03 /* Comm channel for BSS creation */ #define WI_RID_OWN_SSID 0xFC04 /* IBSS creation ID */ #define WI_RID_OWN_ATIM_WIN 0xFC05 /* ATIM window time for IBSS creation */ #define WI_RID_SYSTEM_SCALE 0xFC06 /* scale that specifies AP density */ #define WI_RID_MAX_DATALEN 0xFC07 /* Max len of MAC frame body data */ #define WI_RID_MAC_WDS 0xFC08 /* MAC addr of corresponding WDS node */ #define WI_RID_PM_ENABLED 0xFC09 /* ESS power management enable */ #define WI_RID_PM_EPS 0xFC0A /* PM EPS/PS mode */ #define WI_RID_MCAST_RX 0xFC0B /* ESS PM mcast reception */ #define WI_RID_MAX_SLEEP 0xFC0C /* max sleep time for ESS PM */ #define WI_RID_HOLDOVER 0xFC0D /* holdover time for ESS PM */ #define WI_RID_NODENAME 0xFC0E /* ID name of this node for diag */ #define WI_RID_DTIM_PERIOD 0xFC10 /* beacon interval between DTIMs */ #define WI_RID_WDS_ADDR1 0xFC11 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR2 0xFC12 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR3 0xFC13 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR4 0xFC14 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR5 0xFC15 /* port 1 MAC of WDS link node */ #define WI_RID_WDS_ADDR6 0xFC16 /* port 1 MAC of WDS link node */ #define WI_RID_MCAST_PM_BUF 0xFC17 /* PM buffering of mcast */ #define WI_RID_ENCRYPTION 0xFC20 /* enable/disable WEP */ #define WI_RID_AUTHTYPE 0xFC21 /* specify authentication type */ #define WI_RID_SYMBOL_MANDATORYBSSID 0xFC21 #define WI_RID_P2_TX_CRYPT_KEY 0xFC23 #define WI_RID_P2_CRYPT_KEY0 0xFC24 #define WI_RID_P2_CRYPT_KEY1 0xFC25 #define WI_RID_MICROWAVE_OVEN 0xFC25 /* Microwave oven robustness */ #define WI_RID_P2_CRYPT_KEY2 0xFC26 #define WI_RID_P2_CRYPT_KEY3 0xFC27 #define WI_RID_P2_ENCRYPTION 0xFC28 #define PRIVACY_INVOKED 0x01 #define EXCLUDE_UNENCRYPTED 0x02 #define HOST_ENCRYPT 0x10 #define IV_EVERY_FRAME 0x00 #define IV_EVERY10_FRAME 0x20 #define IV_EVERY50_FRAME 0x40 #define IV_EVERY100_FRAME 0x60 #define HOST_DECRYPT 0x80 #define WI_RID_WEP_MAPTABLE 0xFC29 #define WI_RID_CNFAUTHMODE 0xFC2A #define WI_RID_SYMBOL_KEYLENGTH 0xFC2B #define WI_RID_ROAMING_MODE 0xFC2D /* Roaming mode (1:firm,3:disable) */ #define WI_RID_CNF_DBM_ADJUST 0xFC46 /* Get DBM adjustment factor */ #define WI_RID_SYMBOL_PREAMBLE 0xFC8C /* Enable/disable short preamble */ #define WI_RID_P2_SHORT_PREAMBLE 0xFCB0 /* Short preamble support */ #define WI_RID_P2_EXCLUDE_LONG_PREAMBLE 0xFCB1 /* Don't send long preamble */ #define WI_RID_BASIC_RATE 0xFCB3 #define WI_RID_SUPPORT_RATE 0xFCB4 #define WI_RID_SYMBOL_DIVERSITY 0xFC87 /* Symbol antenna diversity */ #define WI_RID_SYMBOL_BASIC_RATE 0xFC90 /* * Network parameters, dynamic configuration entities */ #define WI_RID_MCAST_LIST 0xFC80 /* list of multicast addrs (up to 16) */ #define WI_RID_CREATE_IBSS 0xFC81 /* create IBSS */ #define WI_RID_FRAG_THRESH 0xFC82 /* frag len, unicast msg xmit */ #define WI_RID_RTS_THRESH 0xFC83 /* frame len for RTS/CTS handshake */ #define WI_RID_TX_RATE 0xFC84 /* data rate for message xmit */ #define WI_RID_PROMISC 0xFC85 /* enable promisc mode */ #define WI_RID_FRAG_THRESH0 0xFC90 #define WI_RID_FRAG_THRESH1 0xFC91 #define WI_RID_FRAG_THRESH2 0xFC92 #define WI_RID_FRAG_THRESH3 0xFC93 #define WI_RID_FRAG_THRESH4 0xFC94 #define WI_RID_FRAG_THRESH5 0xFC95 #define WI_RID_FRAG_THRESH6 0xFC96 #define WI_RID_RTS_THRESH0 0xFC97 #define WI_RID_RTS_THRESH1 0xFC98 #define WI_RID_RTS_THRESH2 0xFC99 #define WI_RID_RTS_THRESH3 0xFC9A #define WI_RID_RTS_THRESH4 0xFC9B #define WI_RID_RTS_THRESH5 0xFC9C #define WI_RID_RTS_THRESH6 0xFC9D #define WI_RID_TX_RATE0 0xFC9E #define WI_RID_TX_RATE1 0xFC9F #define WI_RID_TX_RATE2 0xFCA0 #define WI_RID_TX_RATE3 0xFCA1 #define WI_RID_TX_RATE4 0xFCA2 #define WI_RID_TX_RATE5 0xFCA3 #define WI_RID_TX_RATE6 0xFCA4 #define WI_RID_DEFLT_CRYPT_KEYS 0xFCB0 #define WI_RID_TX_CRYPT_KEY 0xFCB1 #define WI_RID_TICK_TIME 0xFCE0 /* Auxiliary Timer tick interval */ struct wi_key { u_int16_t wi_keylen; u_int8_t wi_keydat[14]; }; struct wi_ltv_keys { u_int16_t wi_len; u_int16_t wi_type; struct wi_key wi_keys[4]; }; /* * NIC information */ #define WI_RID_FIRM_ID 0xFD02 /* Primary func firmware ID. */ #define WI_RID_PRI_SUP_RANGE 0xFD03 /* primary supplier compatibility */ #define WI_RID_CIF_ACT_RANGE 0xFD04 /* controller sup. compatibility */ #define WI_RID_SERIALNO 0xFD0A /* card serial number */ #define WI_RID_CARD_ID 0xFD0B /* card identification */ #define WI_RID_MFI_SUP_RANGE 0xFD0C /* modem supplier compatibility */ #define WI_RID_CFI_SUP_RANGE 0xFD0D /* controller sup. compatibility */ #define WI_RID_CHANNEL_LIST 0xFD10 /* allowd comm. frequencies. */ #define WI_RID_REG_DOMAINS 0xFD11 /* list of intendted regulatory doms */ #define WI_RID_TEMP_TYPE 0xFD12 /* hw temp range code */ #define WI_RID_CIS 0xFD13 /* PC card info struct */ #define WI_RID_STA_IDENTITY 0xFD20 /* station funcs firmware ident */ #define WI_RID_STA_SUP_RANGE 0xFD21 /* station supplier compat */ #define WI_RID_MFI_ACT_RANGE 0xFD22 #define WI_RID_SYMBOL_IDENTITY 0xFD24 /* Symbol station firmware ident */ #define WI_RID_CFI_ACT_RANGE 0xFD33 /* * MAC information */ #define WI_RID_PORT_STAT 0xFD40 /* actual MAC port con control stat */ #define WI_RID_CURRENT_SSID 0xFD41 /* ID of actually connected SS */ #define WI_RID_CURRENT_BSSID 0xFD42 /* ID of actually connected BSS */ #define WI_RID_COMMS_QUALITY 0xFD43 /* quality of BSS connection */ #define WI_RID_CUR_TX_RATE 0xFD44 /* current TX rate */ #define WI_RID_OWN_BEACON_INT 0xFD45 /* beacon xmit time for BSS creation */ #define WI_RID_CUR_SCALE_THRESH 0xFD46 /* actual system scane thresh setting */ #define WI_RID_PROT_RESP_TIME 0xFD47 /* time to wait for resp to req msg */ #define WI_RID_SHORT_RTR_LIM 0xFD48 /* max tx attempts for short frames */ #define WI_RID_LONG_RTS_LIM 0xFD49 /* max tx attempts for long frames */ #define WI_RID_MAX_TX_LIFE 0xFD4A /* max tx frame handling duration */ #define WI_RID_MAX_RX_LIFE 0xFD4B /* max rx frame handling duration */ #define WI_RID_CF_POLL 0xFD4C /* contention free pollable ind */ #define WI_RID_AUTH_ALGS 0xFD4D /* auth algorithms available */ #define WI_RID_AUTH_TYPE 0xFD4E /* availanle auth types */ #define WI_RID_WEP_AVAIL 0xFD4F /* WEP privacy option available */ #define WI_RID_CUR_TX_RATE1 0xFD80 #define WI_RID_CUR_TX_RATE2 0xFD81 #define WI_RID_CUR_TX_RATE3 0xFD82 #define WI_RID_CUR_TX_RATE4 0xFD83 #define WI_RID_CUR_TX_RATE5 0xFD84 #define WI_RID_CUR_TX_RATE6 0xFD85 #define WI_RID_OWN_MAC 0xFD86 /* unique local MAC addr */ #define WI_RID_PCI_INFO 0xFD87 /* point coordination func cap */ /* * Scan Information */ #define WI_RID_BCAST_SCAN_REQ 0xFCAB /* Broadcast Scan request (Symbol) */ #define BSCAN_5SEC 0x01 #define BSCAN_ONETIME 0x02 #define BSCAN_PASSIVE 0x40 #define BSCAN_BCAST 0x80 #define WI_RID_SCAN_REQ 0xFCE1 /* Scan request (STA only) */ #define WI_RID_JOIN_REQ 0xFCE2 /* Join request (STA only) */ #define WI_RID_AUTH_STATION 0xFCE3 /* Authenticates Station (AP) */ #define WI_RID_CHANNEL_REQ 0xFCE4 /* Channel Information Request (AP) */ #define WI_RID_SCAN_RES 0xFD88 /* Scan Results Table */ /* * bsd-airtools v0.2 - source-mods v0.2 [common.h] * by h1kari - (c) Dachb0den Labs 2001 */ /* * Copyright (c) 2001 Dachb0den Labs. * David Hulton . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by David Hulton. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY David Hulton AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL David Hulton OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /* * standard hermes receive frame used by wavelan/prism2 cards */ struct wi_rx_frame { /* * hermes prefix header. supplies information on the current status of * the network and various other statistics gathered from the * management/control frames as used internally. */ u_int16_t wi_status; u_int16_t wi_ts0; u_int16_t wi_ts1; u_int8_t wi_silence; u_int8_t wi_signal; u_int8_t wi_rate; u_int8_t wi_rx_flow; u_int16_t wi_rsvd0; u_int16_t wi_rsvd1; /* * standard 80211 frame header. all packets have to use this header as * per the AN9900 from intersil, even management/control. for * management packets, they just threw the header into the data field, * but for control packets the headers are lost in translation and * therefore not all control packet info can be displayed. */ u_int16_t wi_frame_ctl; u_int16_t wi_id; u_int8_t wi_addr1[6]; u_int8_t wi_addr2[6]; u_int8_t wi_addr3[6]; u_int16_t wi_seq_ctl; u_int8_t wi_addr4[6]; u_int16_t wi_dat_len; /* * another wierdity with the drivers. they append a 802.3 header which * is somewhat redundant, since all the same data is provided in the * 802.11 header. */ u_int8_t wi_dst_addr[6]; u_int8_t wi_src_addr[6]; u_int16_t wi_len; }; #define WI_DATA_HDRLEN WI_802_11_OFFSET #define WI_MGMT_HDRLEN WI_802_11_OFFSET_RAW #define WI_CTL_HDRLEN WI_802_11_OFFSET_RAW /* * all data packets have a snap (sub-network access protocol) header that * isn't entirely definied, but added for ethernet compatibility. */ struct wi_snap_frame { u_int16_t wi_dat[3]; u_int16_t wi_type; }; /* * management frame headers * note: all management frames consist of a static header and variable length * fields. */ /* * variable length field structure */ struct wi_mgmt_var_hdr { u_int8_t wi_code; u_int8_t wi_len; u_int8_t wi_data[256]; }; /* * management beacon frame prefix */ struct wi_mgmt_beacon_hdr { u_int32_t wi_ts0; u_int32_t wi_ts1; u_int16_t wi_interval; u_int16_t wi_capinfo; }; /* * ibss announcement traffic indication message (atim) frame * note: no parameters */ /* * management disassociation frame */ struct wi_mgmt_disas_hdr { u_int16_t wi_reason; }; /* * management association request frame prefix */ struct wi_mgmt_asreq_hdr { u_int16_t wi_capinfo; u_int16_t wi_interval; }; /* * management association response frame prefix */ struct wi_mgmt_asresp_hdr { u_int16_t wi_capinfo; u_int16_t wi_status; u_int16_t wi_aid; }; /* * management reassociation request frame prefix */ struct wi_mgmt_reasreq_hdr { u_int16_t wi_capinfo; u_int16_t wi_interval; u_int8_t wi_currap[6]; }; /* * management reassociation response frame prefix */ struct wi_mgmt_reasresp_hdr { u_int16_t wi_capinfo; u_int16_t wi_status; u_int16_t wi_aid; }; /* * management probe request frame prefix * note: no static parameters, only variable length */ /* * management probe response frame prefix */ struct wi_mgmt_proberesp_hdr { u_int32_t wi_ts0; u_int32_t wi_ts1; u_int16_t wi_interval; u_int16_t wi_capinfo; }; /* * management authentication frame prefix */ struct wi_mgmt_auth_hdr { u_int16_t wi_algo; u_int16_t wi_seq; u_int16_t wi_status; }; /* * management deauthentication frame */ struct wi_mgmt_deauth_hdr { u_int16_t wi_reason; }; /* * rid configuration register definitions */ #define WI_RID_PROCFRAME 0x3137 /* Return full frame information */ #define WI_RID_PRISM2 0x3138 /* tell if we're a prism2 card or not */ /* * 802.11 definitions */ #define WI_STAT_BADCRC 0x0001 #define WI_STAT_UNDECRYPTABLE 0x0002 #define WI_STAT_ERRSTAT 0x0003 #define WI_STAT_MAC_PORT 0x0700 #define WI_STAT_1042 0x2000 #define WI_STAT_TUNNEL 0x4000 #define WI_STAT_WMP_MSG 0x6000 #define WI_RXSTAT_MSG_TYPE 0xE000 #define WI_FCTL_OPT_MASK 0xFF00 #define WI_AID_SET 0xC000 #define WI_AID_MASK 0x3FFF #define WI_SCTL_FRAGNUM_MASK 0x000F #define WI_SCTL_SEQNUM_MASK 0xFFF0 #define WI_STAT_UNSPEC_FAIL 1 #define WI_STAT_CAPINFO_FAIL 10 #define WI_STAT_REAS_DENY 11 #define WI_STAT_ASSOC_DENY 12 #define WI_STAT_ALGO_FAIL 13 #define WI_STAT_SEQ_FAIL 14 #define WI_STAT_CHAL_FAIL 15 #define WI_STAT_TOUT_FAIL 16 #define WI_STAT_OVERL_DENY 17 #define WI_STAT_RATE_DENY 18 #define WI_FTYPE_MGMT 0x0000 #define WI_FTYPE_CTL 0x0004 #define WI_FTYPE_DATA 0x0008 #define WI_FCTL_VERS 0x0002 #define WI_FCTL_FTYPE 0x000C #define WI_FCTL_STYPE 0x00F0 #define WI_FCTL_TODS 0x0100 #define WI_FCTL_FROMDS 0x0200 #define WI_FCTL_MOREFRAGS 0x0400 #define WI_FCTL_RETRY 0x0800 #define WI_FCTL_PM 0x1000 #define WI_FCTL_MOREDATA 0x2000 #define WI_FCTL_WEP 0x4000 #define WI_FCTL_ORDER 0x8000 #define WI_FCS_LEN 0x4 /* checksum length */ /* * management definitions */ #define WI_STYPE_MGMT_ASREQ 0x0000 #define WI_STYPE_MGMT_ASRESP 0x0010 #define WI_STYPE_MGMT_REASREQ 0x0020 #define WI_STYPE_MGMT_REASRESP 0x0030 #define WI_STYPE_MGMT_PROBEREQ 0x0040 #define WI_STYPE_MGMT_PROBERESP 0x0050 #define WI_STYPE_MGMT_BEACON 0x0080 #define WI_STYPE_MGMT_ATIM 0x0090 #define WI_STYPE_MGMT_DISAS 0x00A0 #define WI_STYPE_MGMT_AUTH 0x00B0 #define WI_STYPE_MGMT_DEAUTH 0x00C0 #define WI_CAPINFO_ESS 0x01 #define WI_CAPINFO_IBSS 0x02 #define WI_CAPINFO_CFPOLL 0x04 #define WI_CAPINFO_CFPOLLREQ 0x08 #define WI_CAPINFO_PRIV 0x10 #define WI_REASON_UNSPEC 1 #define WI_REASON_AUTH_INVALID 2 #define WI_REASON_DEAUTH_LEAVE 3 #define WI_REASON_DISAS_INACT 4 #define WI_REASON_DISAS_OVERL 5 #define WI_REASON_CLASS2 6 #define WI_REASON_CLASS3 7 #define WI_REASON_DISAS_LEAVE 8 #define WI_REASON_NOAUTH 9 #define WI_VAR_SSID 0 #define WI_VAR_SRATES 1 #define WI_VAR_FH 2 #define WI_VAR_DS 3 #define WI_VAR_CF 4 #define WI_VAR_TIM 5 #define WI_VAR_IBSS 6 #define WI_VAR_CHAL 16 #define WI_VAR_SRATES_MASK 0x7F /* * control definitions */ #define WI_STYPE_CTL_PSPOLL 0x00A0 #define WI_STYPE_CTL_RTS 0x00B0 #define WI_STYPE_CTL_CTS 0x00C0 #define WI_STYPE_CTL_ACK 0x00D0 #define WI_STYPE_CTL_CFEND 0x00E0 #define WI_STYPE_CTL_CFENDCFACK 0x00F0 /* * ap scanning structures */ struct wi_scan_res { u_int16_t wi_chan; u_int16_t wi_noise; u_int16_t wi_signal; u_int8_t wi_bssid[6]; u_int16_t wi_interval; u_int16_t wi_capinfo; u_int16_t wi_ssid_len; u_int8_t wi_ssid[32]; u_int8_t wi_srates[10]; u_int8_t wi_rate; u_int8_t wi_rsvd; }; #define WI_WAVELAN_RES_SIZE 50 struct wi_scan_p2_hdr { u_int16_t wi_rsvd; u_int16_t wi_reason; }; #define WI_PRISM2_RES_SIZE 62 /* * prism2 debug mode definitions */ #define SIOCSPRISM2DEBUG _IOW('i', 137, struct ifreq) #define SIOCGPRISM2DEBUG _IOWR('i', 138, struct ifreq) #define WI_CMD_DEBUG 0x0038 /* prism2 debug */ #define WI_DEBUG_RESET 0x00 #define WI_DEBUG_INIT 0x01 #define WI_DEBUG_SLEEP 0x02 #define WI_DEBUG_WAKE 0x03 #define WI_DEBUG_CHAN 0x08 #define WI_DEBUG_DELAYSUPP 0x09 #define WI_DEBUG_TXSUPP 0x0A #define WI_DEBUG_MONITOR 0x0B #define WI_DEBUG_LEDTEST 0x0C #define WI_DEBUG_CONTTX 0x0E #define WI_DEBUG_STOPTEST 0x0F #define WI_DEBUG_CONTRX 0x10 #define WI_DEBUG_SIGSTATE 0x11 #define WI_DEBUG_CALENABLE 0x13 #define WI_DEBUG_CONFBITS 0x15 /* * Modem information */ #define WI_RID_PHY_TYPE 0xFDC0 /* phys layer type indication */ #define WI_RID_CURRENT_CHAN 0xFDC1 /* current frequency */ #define WI_RID_PWR_STATE 0xFDC2 /* pwr consumption status */ #define WI_RID_CCA_MODE 0xFDC3 /* clear chan assess mode indication */ #define WI_RID_CCA_TIME 0xFDC4 /* clear chan assess time */ #define WI_RID_MAC_PROC_DELAY 0xFDC5 /* MAC processing delay time */ #define WI_RID_DATA_RATES 0xFDC6 /* supported data rates */ #pragma pack() #endif