/* $OpenBSD: isp_openbsd.c,v 1.9 2000/04/06 05:47:54 mjacob Exp $ */ /* * Platform (OpenBSD) dependent common attachment code for Qlogic adapters. * *--------------------------------------- * Copyright (c) 1999 by Matthew Jacob * NASA/Ames Research Center * All rights reserved. *--------------------------------------- * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The author may be reached via electronic communications at * * mjacob@nas.nasa.gov * mjacob@feral.com * * or, via United States Postal Address * * Matthew Jacob * Feral Software * PMB#825 * 5214-F Diamond Heights Blvd. * San Francisco, CA, 94131 */ #include static void ispminphys __P((struct buf *)); static int32_t ispcmd_slow __P((ISP_SCSI_XFER_T *)); static int32_t ispcmd __P((ISP_SCSI_XFER_T *)); static struct scsi_device isp_dev = { NULL, NULL, NULL, NULL }; static int isp_poll __P((struct ispsoftc *, ISP_SCSI_XFER_T *, int)); static void isp_watch __P((void *)); static void isp_command_requeue(void *); static void isp_internal_restart(void *); struct cfdriver isp_cd = { NULL, "isp", DV_DULL }; /* * Complete attachment of hardware, include subdevices. */ void isp_attach(isp) struct ispsoftc *isp; { struct scsi_link *lptr = &isp->isp_osinfo._link[0]; isp->isp_osinfo._adapter.scsi_minphys = ispminphys; isp->isp_state = ISP_RUNSTATE; /* * We only manage a single wait queues for dual bus controllers. * This is arguably broken. */ isp->isp_osinfo.wqf = isp->isp_osinfo.wqt = NULL; lptr->adapter_softc = isp; lptr->device = &isp_dev; lptr->adapter = &isp->isp_osinfo._adapter; lptr->openings = isp->isp_maxcmds; if (IS_FC(isp)) { isp->isp_osinfo._adapter.scsi_cmd = ispcmd; lptr->adapter_buswidth = MAX_FC_TARG; /* We can set max lun width here */ /* loopid set below */ } else { sdparam *sdp = isp->isp_param; isp->isp_osinfo._adapter.scsi_cmd = ispcmd_slow; lptr->adapter_buswidth = MAX_TARGETS; /* We can set max lun width here */ lptr->adapter_target = sdp->isp_initiator_id; isp->isp_osinfo.discovered[0] = 1 << sdp->isp_initiator_id; if (IS_DUALBUS(isp)) { struct scsi_link *lptrb = &isp->isp_osinfo._link[1]; lptrb->adapter_softc = isp; lptrb->device = &isp_dev; lptrb->adapter = &isp->isp_osinfo._adapter; lptrb->openings = isp->isp_maxcmds; lptrb->adapter_buswidth = MAX_TARGETS; lptrb->adapter_target = sdp->isp_initiator_id; lptrb->flags = SDEV_2NDBUS; isp->isp_osinfo.discovered[1] = 1 << (sdp+1)->isp_initiator_id; } } /* * Send a SCSI Bus Reset (used to be done as part of attach, * but now left to the OS outer layers). * * We don't do 'bus resets' for FC because the LIP that occurs * when we start the firmware does all that for us. */ if (IS_SCSI(isp)) { int bus = 0; (void) isp_control(isp, ISPCTL_RESET_BUS, &bus); if (IS_DUALBUS(isp)) { bus++; (void) isp_control(isp, ISPCTL_RESET_BUS, &bus); } /* * wait for the bus to settle. */ printf("%s: waiting 4 seconds for bus reset settling\n", isp->isp_name); delay(4 * 1000000); } else { int i, j; fcparam *fcp = isp->isp_param; /* * wait for the loop to settle. */ printf("%s: waiting 2 seconds for loop reset settling\n", isp->isp_name); delay(2 * 1000000); for (j = 0; j < 5; j++) { for (i = 0; i < 5; i++) { if (isp_control(isp, ISPCTL_FCLINK_TEST, NULL)) continue; #ifdef ISP2100_FABRIC /* * Wait extra time to see if the f/w * eventually completed an FLOGI that * will allow us to know we're on a * fabric. */ if (fcp->isp_onfabric == 0) { delay(1 * 1000000); continue; } #endif break; } if (fcp->isp_fwstate == FW_READY && fcp->isp_loopstate >= LOOP_PDB_RCVD) { break; } } lptr->adapter_target = fcp->isp_loopid; } /* * Start the watchdog. * * The watchdog will, ridiculously enough, also enable Sync negotiation. */ isp->isp_dogactive = 1; timeout(isp_watch, isp, WATCH_INTERVAL * hz); /* * And attach children (if any). */ config_found((void *)isp, lptr, scsiprint); if (IS_DUALBUS(isp)) { lptr++; config_found((void *)isp, lptr, scsiprint); } } /* * minphys our xfers * * Unfortunately, the buffer pointer describes the target device- not the * adapter device, so we can't use the pointer to find out what kind of * adapter we are and adjust accordingly. */ static void ispminphys(bp) struct buf *bp; { /* * XX: Only the 1020 has a 24 bit limit. */ if (bp->b_bcount >= (1 << 24)) { bp->b_bcount = (1 << 24); } minphys(bp); } static int32_t ispcmd_slow(xs) ISP_SCSI_XFER_T *xs; { sdparam *sdp; int tgt, chan; u_int16_t f; struct ispsoftc *isp = XS_ISP(xs); /* * Have we completed discovery for this target on this adapter? */ sdp = isp->isp_param; tgt = XS_TGT(xs); chan = XS_CHANNEL(xs); sdp += chan; if ((xs->flags & SCSI_POLL) != 0 || (isp->isp_osinfo.discovered[chan] & (1 << tgt)) != 0) { return (ispcmd(xs)); } f = DPARM_DEFAULT; if (xs->sc_link->quirks & SDEV_NOSYNC) { f ^= DPARM_SYNC; #ifdef DEBUG } else { printf("%s: channel %d target %d can do SYNC xfers\n", isp->isp_name, chan, tgt); #endif } if (xs->sc_link->quirks & SDEV_NOWIDE) { f ^= DPARM_WIDE; #ifdef DEBUG } else { printf("%s: channel %d target %d can do WIDE xfers\n", isp->isp_name, chan, tgt); #endif } if (xs->sc_link->quirks & SDEV_NOTAGS) { f ^= DPARM_TQING; #ifdef DEBUG } else { printf("%s: channel %d target %d can do TAGGED xfers\n", isp->isp_name, chan, tgt); #endif } /* * Okay, we know about this device now, * so mark parameters to be updated for it. */ sdp->isp_devparam[tgt].dev_flags = f; sdp->isp_devparam[tgt].dev_update = 1; isp->isp_update |= (1 << chan); /* * Now check to see whether we can get out of this checking mode now. * XXX: WE CANNOT AS YET BECAUSE THERE IS NO MECHANISM TO TELL US * XXX: WHEN WE'RE DONE DISCOVERY BECAUSE WE NEED ONE COMMAND AFTER * XXX: DISCOVERY IS DONE FOR EACH TARGET TO TELL US THAT WE'RE DONE * XXX: AND THAT DOESN'T HAPPEN HERE. AT BEST WE CAN MARK OURSELVES * XXX: DONE WITH DISCOVERY FOR THIS TARGET AND SO SAVE MAYBE 20 * XXX: LINES OF C CODE. */ isp->isp_osinfo.discovered[chan] |= (1 << tgt); /* do not bother with these lines- they'll never execute correctly */ #if 0 sdp = isp->isp_param; for (chan = 0; chan < (IS_12X0(isp)? 2 : 1); chan++, sdp++) { f = 0xffff & ~(1 << sdp->isp_initiator_id); if (isp->isp_osinfo.discovered[chan] != f) { break; } } if (chan == (IS_12X0(isp)? 2 : 1)) { CFGPRINTF("%s: allowing sync/wide negotiation and " "tag usage\n", isp->isp_name); isp->isp_osinfo._adapter.scsipi_cmd = ispcmd; if (IS_12X0(isp)) isp->isp_update |= 2; } #endif return (ispcmd(xs)); } static int32_t ispcmd(xs) ISP_SCSI_XFER_T *xs; { struct ispsoftc *isp; int result; int s; isp = xs->sc_link->adapter_softc; s = splbio(); if (isp->isp_state < ISP_RUNSTATE) { DISABLE_INTS(isp); isp_init(isp); if (isp->isp_state != ISP_INITSTATE) { ENABLE_INTS(isp); (void) splx(s); XS_SETERR(xs, HBA_BOTCH); return (CMD_COMPLETE); } isp->isp_state = ISP_RUNSTATE; ENABLE_INTS(isp); } /* * Check for queue blockage... */ if (isp->isp_osinfo.blocked) { IDPRINTF(2, ("%s: blocked\n", isp->isp_name)); if (xs->flags & SCSI_POLL) { xs->error = XS_DRIVER_STUFFUP; splx(s); return (TRY_AGAIN_LATER); } if (isp->isp_osinfo.wqf != NULL) { isp->isp_osinfo.wqt->free_list.le_next = xs; } else { isp->isp_osinfo.wqf = xs; } isp->isp_osinfo.wqt = xs; xs->free_list.le_next = NULL; splx(s); return (SUCCESSFULLY_QUEUED); } DISABLE_INTS(isp); result = ispscsicmd(xs); ENABLE_INTS(isp); if ((xs->flags & SCSI_POLL) == 0) { switch (result) { case CMD_QUEUED: result = SUCCESSFULLY_QUEUED; break; case CMD_EAGAIN: result = TRY_AGAIN_LATER; break; case CMD_RQLATER: result = SUCCESSFULLY_QUEUED; timeout(isp_command_requeue, xs, hz); break; case CMD_COMPLETE: result = COMPLETE; break; } (void) splx(s); return (result); } switch (result) { case CMD_QUEUED: result = SUCCESSFULLY_QUEUED; break; case CMD_RQLATER: case CMD_EAGAIN: if (XS_NOERR(xs)) { xs->error = XS_DRIVER_STUFFUP; } result = TRY_AGAIN_LATER; break; case CMD_COMPLETE: result = COMPLETE; break; } /* * We can't use interrupts so poll on completion. */ if (result == SUCCESSFULLY_QUEUED) { if (isp_poll(isp, xs, xs->timeout)) { /* * If no other error occurred but we didn't finish, * something bad happened. */ if (XS_IS_CMD_DONE(xs) == 0) { if (isp_control(isp, ISPCTL_ABORT_CMD, xs)) { isp_restart(isp); } if (XS_NOERR(xs)) { XS_SETERR(xs, HBA_BOTCH); } } } result = COMPLETE; } (void) splx(s); return (result); } static int isp_poll(isp, xs, mswait) struct ispsoftc *isp; ISP_SCSI_XFER_T *xs; int mswait; { while (mswait) { /* Try the interrupt handling routine */ (void)isp_intr((void *)isp); /* See if the xs is now done */ if (XS_IS_CMD_DONE(xs)) { return (0); } delay(1000); /* wait one millisecond */ mswait--; } return (1); } static void isp_watch(arg) void *arg; { int i; struct ispsoftc *isp = arg; struct scsi_xfer *xs; int s; /* * Look for completely dead commands (but not polled ones). */ s = splbio(); for (i = 0; i < isp->isp_maxcmds; i++) { if ((xs = (struct scsi_xfer *) isp->isp_xflist[i]) == NULL) { continue; } if (xs->timeout == 0 || (xs->flags & SCSI_POLL)) { continue; } xs->timeout -= (WATCH_INTERVAL * 1000); /* * Avoid later thinking that this * transaction is not being timed. * Then give ourselves to watchdog * periods of grace. */ if (xs->timeout == 0) { xs->timeout = 1; } else if (xs->timeout > -(2 * WATCH_INTERVAL * 1000)) { continue; } if (isp_control(isp, ISPCTL_ABORT_CMD, xs)) { printf("%s: isp_watch failed to abort command\n", isp->isp_name); isp_restart(isp); break; } } timeout(isp_watch, isp, WATCH_INTERVAL * hz); isp->isp_dogactive = 1; splx(s); } /* * Free any associated resources prior to decommissioning and * set the card to a known state (so it doesn't wake up and kick * us when we aren't expecting it to). * * Locks are held before coming here. */ void isp_uninit(isp) struct ispsoftc *isp; { int s = splbio(); /* * Leave with interrupts disabled. */ DISABLE_INTS(isp); /* * Turn off the watchdog (if active). */ if (isp->isp_dogactive) { untimeout(isp_watch, isp); isp->isp_dogactive = 0; } splx(s); } /* * Restart function for a command to be requeued later. */ static void isp_command_requeue(void *arg) { struct scsi_xfer *xs = arg; struct ispsoftc *isp = XS_ISP(xs); int s = splbio(); switch (ispcmd_slow(xs)) { case SUCCESSFULLY_QUEUED: printf("%s: isp_command_reque: queued %d.%d\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); break; case TRY_AGAIN_LATER: printf("%s: EAGAIN for %d.%d\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); /* FALLTHROUGH */ case COMPLETE: /* can only be an error */ if (XS_NOERR(xs)) XS_SETERR(xs, XS_DRIVER_STUFFUP); XS_CMD_DONE(xs); break; } (void) splx(s); } /* * Restart function after a LOOP UP event (e.g.), * done as a timeout for some hysteresis. */ static void isp_internal_restart(void *arg) { struct ispsoftc *isp = arg; int result, nrestarted = 0, s; s = splbio(); if (isp->isp_osinfo.blocked == 0) { struct scsi_xfer *xs; while ((xs = isp->isp_osinfo.wqf) != NULL) { isp->isp_osinfo.wqf = xs->free_list.le_next; xs->free_list.le_next = NULL; DISABLE_INTS(isp); result = ispscsicmd(xs); ENABLE_INTS(isp); if (result != CMD_QUEUED) { printf("%s: botched command restart (0x%x)\n", isp->isp_name, result); if (XS_NOERR(xs)) XS_SETERR(xs, XS_DRIVER_STUFFUP); XS_CMD_DONE(xs); } nrestarted++; } printf("%s: requeued %d commands\n", isp->isp_name, nrestarted); } (void) splx(s); } int isp_async(isp, cmd, arg) struct ispsoftc *isp; ispasync_t cmd; void *arg; { int bus, tgt; int s = splbio(); switch (cmd) { case ISPASYNC_NEW_TGT_PARAMS: if (IS_SCSI(isp) && isp->isp_dblev) { sdparam *sdp = isp->isp_param; char *wt; int mhz, flags, period; tgt = *((int *) arg); bus = (tgt >> 16) & 0xffff; tgt &= 0xffff; sdp += bus; flags = sdp->isp_devparam[tgt].cur_dflags; period = sdp->isp_devparam[tgt].cur_period; if ((flags & DPARM_SYNC) && period && (sdp->isp_devparam[tgt].cur_offset) != 0) { if (sdp->isp_lvdmode || period < 0xc) { switch (period) { case 0x9: mhz = 80; break; case 0xa: mhz = 40; break; case 0xb: mhz = 33; break; case 0xc: mhz = 25; break; default: mhz = 1000 / (period * 4); break; } } else { mhz = 1000 / (period * 4); } } else { mhz = 0; } switch (flags & (DPARM_WIDE|DPARM_TQING)) { case DPARM_WIDE: wt = ", 16 bit wide\n"; break; case DPARM_TQING: wt = ", Tagged Queueing Enabled\n"; break; case DPARM_WIDE|DPARM_TQING: wt = ", 16 bit wide, Tagged Queueing Enabled\n"; break; default: wt = "\n"; break; } if (mhz) { CFGPRINTF("%s: Bus %d Target %d at %dMHz Max " "Offset %d%s", isp->isp_name, bus, tgt, mhz, sdp->isp_devparam[tgt].cur_offset, wt); } else { CFGPRINTF("%s: Bus %d Target %d Async Mode%s", isp->isp_name, bus, tgt, wt); } break; } case ISPASYNC_BUS_RESET: if (arg) bus = *((int *) arg); else bus = 0; printf("%s: SCSI bus %d reset detected\n", isp->isp_name, bus); break; case ISPASYNC_LOOP_DOWN: /* * Hopefully we get here in time to minimize the number * of commands we are firing off that are sure to die. */ isp->isp_osinfo.blocked = 1; printf("%s: Loop DOWN\n", isp->isp_name); break; case ISPASYNC_LOOP_UP: isp->isp_osinfo.blocked = 0; timeout(isp_internal_restart, isp, 1); printf("%s: Loop UP\n", isp->isp_name); break; case ISPASYNC_PDB_CHANGED: if (IS_FC(isp) && isp->isp_dblev) { const char *fmt = "%s: Target %d (Loop 0x%x) Port ID 0x%x " "role %s %s\n Port WWN 0x%08x%08x\n Node WWN 0x%08x%08x\n"; const static char *roles[4] = { "No", "Target", "Initiator", "Target/Initiator" }; char *ptr; fcparam *fcp = isp->isp_param; int tgt = *((int *) arg); struct lportdb *lp = &fcp->portdb[tgt]; if (lp->valid) { ptr = "arrived"; } else { ptr = "disappeared"; } printf(fmt, isp->isp_name, tgt, lp->loopid, lp->portid, roles[lp->roles & 0x3], ptr, (u_int32_t) (lp->port_wwn >> 32), (u_int32_t) (lp->port_wwn & 0xffffffffLL), (u_int32_t) (lp->node_wwn >> 32), (u_int32_t) (lp->node_wwn & 0xffffffffLL)); break; } #ifdef ISP2100_FABRIC case ISPASYNC_CHANGE_NOTIFY: printf("%s: Name Server Database Changed\n", isp->isp_name); break; case ISPASYNC_FABRIC_DEV: { int target; struct lportdb *lp; char *pt; sns_ganrsp_t *resp = (sns_ganrsp_t *) arg; u_int32_t portid; u_int64_t wwpn, wwnn; fcparam *fcp = isp->isp_param; portid = (((u_int32_t) resp->snscb_port_id[0]) << 16) | (((u_int32_t) resp->snscb_port_id[1]) << 8) | (((u_int32_t) resp->snscb_port_id[2])); wwpn = (((u_int64_t)resp->snscb_portname[0]) << 56) | (((u_int64_t)resp->snscb_portname[1]) << 48) | (((u_int64_t)resp->snscb_portname[2]) << 40) | (((u_int64_t)resp->snscb_portname[3]) << 32) | (((u_int64_t)resp->snscb_portname[4]) << 24) | (((u_int64_t)resp->snscb_portname[5]) << 16) | (((u_int64_t)resp->snscb_portname[6]) << 8) | (((u_int64_t)resp->snscb_portname[7])); wwnn = (((u_int64_t)resp->snscb_nodename[0]) << 56) | (((u_int64_t)resp->snscb_nodename[1]) << 48) | (((u_int64_t)resp->snscb_nodename[2]) << 40) | (((u_int64_t)resp->snscb_nodename[3]) << 32) | (((u_int64_t)resp->snscb_nodename[4]) << 24) | (((u_int64_t)resp->snscb_nodename[5]) << 16) | (((u_int64_t)resp->snscb_nodename[6]) << 8) | (((u_int64_t)resp->snscb_nodename[7])); if (portid == 0 || wwpn == 0) { break; } switch (resp->snscb_port_type) { case 1: pt = " N_Port"; break; case 2: pt = " NL_Port"; break; case 3: pt = "F/NL_Port"; break; case 0x7f: pt = " Nx_Port"; break; case 0x81: pt = " F_port"; break; case 0x82: pt = " FL_Port"; break; case 0x84: pt = " E_port"; break; default: pt = "?"; break; } CFGPRINTF("%s: %s @ 0x%x, Node 0x%08x%08x Port %08x%08x\n", isp->isp_name, pt, portid, ((u_int32_t) (wwnn >> 32)), ((u_int32_t) wwnn), ((u_int32_t) (wwpn >> 32)), ((u_int32_t) wwpn)); #if 0 if ((resp->snscb_fc4_types[1] & 0x1) == 0) { printf("Types 0..3: 0x%x 0x%x 0x%x 0x%x\n", resp->snscb_fc4_types[0], resp->snscb_fc4_types[1], resp->snscb_fc4_types[3], resp->snscb_fc4_types[3]); break; } #endif for (target = FC_SNS_ID+1; target < MAX_FC_TARG; target++) { lp = &fcp->portdb[target]; if (lp->port_wwn == wwpn && lp->node_wwn == wwnn) break; } if (target < MAX_FC_TARG) { break; } for (target = FC_SNS_ID+1; target < MAX_FC_TARG; target++) { lp = &fcp->portdb[target]; if (lp->port_wwn == 0) break; } if (target == MAX_FC_TARG) { printf("%s: no more space for fabric devices\n", isp->isp_name); break; } lp->node_wwn = wwnn; lp->port_wwn = wwpn; lp->portid = portid; break; } #endif default: break; } (void) splx(s); return (0); }