/* $OpenBSD: lpt.c,v 1.4 2000/07/21 17:41:02 mickey Exp $ */ /* $NetBSD: lpt.c,v 1.42 1996/10/21 22:41:14 thorpej Exp $ */ /* * Copyright (c) 1993, 1994 Charles Hannum. * Copyright (c) 1990 William F. Jolitz, TeleMuse * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This software is a component of "386BSD" developed by * William F. Jolitz, TeleMuse. * 4. Neither the name of the developer nor the name "386BSD" * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT. * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT * NOT MAKE USE OF THIS WORK. * * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN * REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992. * * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Device Driver for AT parallel printer port */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "lpt.h" #define TIMEOUT hz*16 /* wait up to 16 seconds for a ready */ #define STEP hz/4 #define LPTPRI (PZERO+8) #define LPT_BSIZE 1024 #if !defined(DEBUG) || !defined(notdef) #define LPRINTF(a) #else #define LPRINTF(a) if (lptdebug) printf a int lptdebug = 1; #endif /* XXX does not belong here */ cdev_decl(lpt); struct cfdriver lpt_cd = { NULL, "lpt", DV_TTY }; #define LPTUNIT(s) (minor(s) & 0x1f) #define LPTFLAGS(s) (minor(s) & 0xe0) #define LPS_INVERT (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK) #define LPS_MASK (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK|LPS_NOPAPER) #define NOT_READY() \ ((bus_space_read_1(iot, ioh, lpt_status) ^ LPS_INVERT) & LPS_MASK) #define NOT_READY_ERR() \ lpt_not_ready(bus_space_read_1(iot, ioh, lpt_status), sc) int lpt_not_ready __P((u_int8_t, struct lpt_softc *)); void lptwakeup __P((void *arg)); int lptpushbytes __P((struct lpt_softc *)); /* * Internal routine to lptprobe to do port tests of one byte value. */ int lpt_port_test(iot, ioh, base, off, data, mask) bus_space_tag_t iot; bus_space_handle_t ioh; bus_addr_t base; bus_size_t off; u_int8_t data, mask; { int timeout; u_int8_t temp; data &= mask; bus_space_write_1(iot, ioh, off, data); timeout = 1000; do { delay(10); temp = bus_space_read_1(iot, ioh, off) & mask; } while (temp != data && --timeout); LPRINTF(("lpt: port=0x%x out=0x%x in=0x%x timeout=%d\n", base + off, data, temp, timeout)); return (temp == data); } void lpt_attach_common(sc) struct lpt_softc *sc; { printf("\n"); bus_space_write_1(sc->sc_iot, sc->sc_ioh, lpt_control, LPC_NINIT); timeout_set(&sc->sc_wakeup_tmo, lptwakeup, sc); } /* * Reset the printer, then wait until it's selected and not busy. */ int lptopen(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { int unit = LPTUNIT(dev); u_int8_t flags = LPTFLAGS(dev); struct lpt_softc *sc; bus_space_tag_t iot; bus_space_handle_t ioh; u_int8_t control; int error; int spin; if (unit >= lpt_cd.cd_ndevs) return ENXIO; sc = lpt_cd.cd_devs[unit]; if (!sc) return ENXIO; sc->sc_flags = (sc->sc_flags & LPT_POLLED) | flags; if ((sc->sc_flags & (LPT_POLLED|LPT_NOINTR)) == LPT_POLLED) return ENXIO; #ifdef DIAGNOSTIC if (sc->sc_state) printf("%s: stat=0x%x not zero\n", sc->sc_dev.dv_xname, sc->sc_state); #endif if (sc->sc_state) return EBUSY; sc->sc_state = LPT_INIT; LPRINTF(("%s: open: flags=0x%x\n", sc->sc_dev.dv_xname, flags)); iot = sc->sc_iot; ioh = sc->sc_ioh; if ((flags & LPT_NOPRIME) == 0) { /* assert INIT for 100 usec to start up printer */ bus_space_write_1(iot, ioh, lpt_control, LPC_SELECT); delay(100); } control = LPC_SELECT | LPC_NINIT; bus_space_write_1(iot, ioh, lpt_control, control); /* wait till ready (printer running diagnostics) */ for (spin = 0; NOT_READY_ERR(); spin += STEP) { if (spin >= TIMEOUT) { sc->sc_state = 0; return EBUSY; } /* wait 1/4 second, give up if we get a signal */ error = tsleep((caddr_t)sc, LPTPRI | PCATCH, "lptopen", STEP); if (error != EWOULDBLOCK) { sc->sc_state = 0; return error; } } if ((flags & LPT_NOINTR) == 0) control |= LPC_IENABLE; if (flags & LPT_AUTOLF) control |= LPC_AUTOLF; sc->sc_control = control; bus_space_write_1(iot, ioh, lpt_control, control); sc->sc_inbuf = geteblk(LPT_BSIZE); sc->sc_count = 0; sc->sc_state = LPT_OPEN; if ((sc->sc_flags & LPT_NOINTR) == 0) lptwakeup(sc); LPRINTF(("%s: opened\n", sc->sc_dev.dv_xname)); return 0; } int lpt_not_ready(status, sc) u_int8_t status; struct lpt_softc *sc; { u_int8_t new; status = (status ^ LPS_INVERT) & LPS_MASK; new = status & ~sc->sc_laststatus; sc->sc_laststatus = status; if (new & LPS_SELECT) log(LOG_NOTICE, "%s: offline\n", sc->sc_dev.dv_xname); else if (new & LPS_NOPAPER) log(LOG_NOTICE, "%s: out of paper\n", sc->sc_dev.dv_xname); else if (new & LPS_NERR) log(LOG_NOTICE, "%s: output error\n", sc->sc_dev.dv_xname); return status; } void lptwakeup(arg) void *arg; { struct lpt_softc *sc = arg; int s; s = spltty(); lptintr(sc); splx(s); timeout_add(&sc->sc_wakeup_tmo, STEP); } /* * Close the device, and free the local line buffer. */ int lptclose(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { int unit = LPTUNIT(dev); struct lpt_softc *sc = lpt_cd.cd_devs[unit]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if (sc->sc_count) (void) lptpushbytes(sc); if ((sc->sc_flags & LPT_NOINTR) == 0) timeout_del(&sc->sc_wakeup_tmo); bus_space_write_1(iot, ioh, lpt_control, LPC_NINIT); sc->sc_state = 0; bus_space_write_1(iot, ioh, lpt_control, LPC_NINIT); brelse(sc->sc_inbuf); LPRINTF(("%s: closed\n", sc->sc_dev.dv_xname)); return 0; } int lptpushbytes(sc) struct lpt_softc *sc; { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int error; if (sc->sc_flags & LPT_NOINTR) { int spin, tic; u_int8_t control = sc->sc_control; while (sc->sc_count > 0) { spin = 0; while (NOT_READY()) { if (++spin < sc->sc_spinmax) continue; tic = 0; /* adapt busy-wait algorithm */ sc->sc_spinmax++; while (NOT_READY_ERR()) { /* exponential backoff */ tic = tic + tic + 1; if (tic > TIMEOUT) tic = TIMEOUT; error = tsleep((caddr_t)sc, LPTPRI | PCATCH, "lptpsh", tic); if (error != EWOULDBLOCK) return error; } break; } bus_space_write_1(iot, ioh, lpt_data, *sc->sc_cp++); bus_space_write_1(iot, ioh, lpt_control, control | LPC_STROBE); sc->sc_count--; bus_space_write_1(iot, ioh, lpt_control, control); /* adapt busy-wait algorithm */ if (spin*2 + 16 < sc->sc_spinmax) sc->sc_spinmax--; } } else { int s; while (sc->sc_count > 0) { /* if the printer is ready for a char, give it one */ if ((sc->sc_state & LPT_OBUSY) == 0) { LPRINTF(("%s: write %d\n", sc->sc_dev.dv_xname, sc->sc_count)); s = spltty(); (void) lptintr(sc); splx(s); } error = tsleep((caddr_t)sc, LPTPRI | PCATCH, "lptwrite2", 0); if (error) return error; } } return 0; } /* * Copy a line from user space to a local buffer, then call putc to get the * chars moved to the output queue. */ int lptwrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { struct lpt_softc *sc = lpt_cd.cd_devs[LPTUNIT(dev)]; size_t n; int error = 0; while ((n = min(LPT_BSIZE, uio->uio_resid)) != 0) { uiomove(sc->sc_cp = sc->sc_inbuf->b_data, n, uio); sc->sc_count = n; error = lptpushbytes(sc); if (error) { /* * Return accurate residual if interrupted or timed * out. */ uio->uio_resid += sc->sc_count; sc->sc_count = 0; return error; } } return 0; } /* * Handle printer interrupts which occur when the printer is ready to accept * another char. */ int lptintr(arg) void *arg; { struct lpt_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if (((sc->sc_state & LPT_OPEN) == 0 && sc->sc_count == 0) || (sc->sc_flags & LPT_NOINTR)) return 0; /* is printer online and ready for output */ if (NOT_READY() && NOT_READY_ERR()) return -1; if (sc->sc_count) { u_int8_t control = sc->sc_control; /* send char */ bus_space_write_1(iot, ioh, lpt_data, *sc->sc_cp++); delay (50); bus_space_write_1(iot, ioh, lpt_control, control | LPC_STROBE); sc->sc_count--; bus_space_write_1(iot, ioh, lpt_control, control); sc->sc_state |= LPT_OBUSY; } else sc->sc_state &= ~LPT_OBUSY; if (sc->sc_count == 0) { /* none, wake up the top half to get more */ wakeup((caddr_t)sc); } return 1; } int lptioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { int error = 0; switch (cmd) { default: error = ENODEV; } return error; }