/* $OpenBSD: mpt_mpilib.h,v 1.5 2004/11/21 04:49:25 marco Exp $ */ /* $NetBSD: mpt_mpilib.h,v 1.2 2003/04/16 23:24:01 thorpej Exp $ */ /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_TYPE.H * Title: MPI Basic type definitions * Creation Date: June 6, 2000 * * MPI Version: 01.02.01 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. * 08-08-01 01.02.01 Original release for v1.2 work. * -------------------------------------------------------------------------- */ #ifndef MPI_TYPE_H #define MPI_TYPE_H /******************************************************************************* * Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER * is defined to be a near pointer. MPI_POINTER can be defined as a far pointer * by defining MPI_POINTER as "far *" before this header file is included. */ #ifndef MPI_POINTER #define MPI_POINTER * #endif /***************************************************************************** * * B a s i c T y p e s * *****************************************************************************/ #ifdef __NetBSD__ typedef int8_t S8; typedef uint8_t U8; typedef int16_t S16; typedef uint16_t U16; typedef int32_t S32; typedef uint32_t U32; #else /* ! __NetBSD__ */ typedef signed char S8; typedef unsigned char U8; typedef signed short S16; typedef unsigned short U16; #if defined(unix) || defined(__arm) || defined(ALPHA) || defined(__GNUC__) typedef signed int S32; typedef unsigned int U32; #else typedef signed long S32; typedef unsigned long U32; #endif #endif /* __NetBSD__ */ typedef struct _S64 { U32 Low; S32 High; } S64; typedef struct _U64 { U32 Low; U32 High; } U64; /****************************************************************************/ /* Pointers */ /****************************************************************************/ typedef S8 *PS8; typedef U8 *PU8; typedef S16 *PS16; typedef U16 *PU16; typedef S32 *PS32; typedef U32 *PU32; typedef S64 *PS64; typedef U64 *PU64; #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI.H * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * * MPI Version: 01.02.03 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition. * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR. * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions. * Removed LAN_SUSPEND function definition. * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition. * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition. * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros. * 07-27-00 01.00.04 Added MPI_FAULT_ definitions. * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions. * Added MPI_IOCSTATUS_INTERNAL_ERROR definition. * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH. * 11-02-00 01.01.01 Original release for post 1.0 work. * 12-04-00 01.01.02 Added new function codes. * 01-09-01 01.01.03 Added more definitions to the system interface section * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT. * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01. * 02-20-01 01.01.05 Started using MPI_POINTER. * Fixed value for MPI_DIAG_RW_ENABLE. * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and * MPI_DIAG_CLEAR_FLASH_BAD_SIG. * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines. * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define. * Added function codes for RAID. * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, * MPI_DOORBELL_USED, to better match the spec. * 08-08-01 01.02.01 Original release for v1.2 work. * Changed MPI_VERSION_MINOR from 0x01 to 0x02. * Added define MPI_FUNCTION_TOOLBOX. * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR. * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR. * -------------------------------------------------------------------------- */ #ifndef MPI_H #define MPI_H /***************************************************************************** * * M P I V e r s i o n D e f i n i t i o n s * *****************************************************************************/ #define MPI_VERSION_MAJOR (0x01) #define MPI_VERSION_MINOR (0x02) #define MPI_VERSION ((MPI_VERSION_MAJOR << 8) | MPI_VERSION_MINOR) /* Note: The major versions of 0xe0 through 0xff are reserved */ /***************************************************************************** * * I O C S t a t e D e f i n i t i o n s * *****************************************************************************/ #define MPI_IOC_STATE_RESET (0x00000000) #define MPI_IOC_STATE_READY (0x10000000) #define MPI_IOC_STATE_OPERATIONAL (0x20000000) #define MPI_IOC_STATE_FAULT (0x40000000) #define MPI_IOC_STATE_MASK (0xF0000000) #define MPI_IOC_STATE_SHIFT (28) /* Fault state codes (product independent range 0x8000-0xFFFF) */ #define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR (0x8111) #define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT (0x8112) #define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR (0x8113) #define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT (0x8114) #define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR (0x8115) #define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT (0x8116) #define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR (0x8117) #define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT (0x8118) /***************************************************************************** * * P C I S y s t e m I n t e r f a c e R e g i s t e r s * *****************************************************************************/ /* S y s t e m D o o r b e l l */ #define MPI_DOORBELL_OFFSET (0x00000000) #define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */ #define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE) #define MPI_DOORBELL_ACTIVE_SHIFT (27) #define MPI_DOORBELL_WHO_INIT_MASK (0x07000000) #define MPI_DOORBELL_WHO_INIT_SHIFT (24) #define MPI_DOORBELL_FUNCTION_MASK (0xFF000000) #define MPI_DOORBELL_FUNCTION_SHIFT (24) #define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) #define MPI_DOORBELL_ADD_DWORDS_SHIFT (16) #define MPI_DOORBELL_DATA_MASK (0x0000FFFF) #define MPI_WRITE_SEQUENCE_OFFSET (0x00000004) #define MPI_WRSEQ_KEY_VALUE_MASK (0x0000000F) #define MPI_WRSEQ_1ST_KEY_VALUE (0x04) #define MPI_WRSEQ_2ND_KEY_VALUE (0x0B) #define MPI_WRSEQ_3RD_KEY_VALUE (0x02) #define MPI_WRSEQ_4TH_KEY_VALUE (0x07) #define MPI_WRSEQ_5TH_KEY_VALUE (0x0D) #define MPI_DIAGNOSTIC_OFFSET (0x00000008) #define MPI_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) #define MPI_DIAG_PREVENT_IOC_BOOT (0x00000200) #define MPI_DIAG_DRWE (0x00000080) #define MPI_DIAG_FLASH_BAD_SIG (0x00000040) #define MPI_DIAG_RESET_HISTORY (0x00000020) #define MPI_DIAG_RW_ENABLE (0x00000010) #define MPI_DIAG_RESET_ADAPTER (0x00000004) #define MPI_DIAG_DISABLE_ARM (0x00000002) #define MPI_DIAG_MEM_ENABLE (0x00000001) #define MPI_TEST_BASE_ADDRESS_OFFSET (0x0000000C) #define MPI_DIAG_RW_DATA_OFFSET (0x00000010) #define MPI_DIAG_RW_ADDRESS_OFFSET (0x00000014) #define MPI_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) #define MPI_HIS_IOP_DOORBELL_STATUS (0x80000000) #define MPI_HIS_REPLY_MESSAGE_INTERRUPT (0x00000008) #define MPI_HIS_DOORBELL_INTERRUPT (0x00000001) #define MPI_HOST_INTERRUPT_MASK_OFFSET (0x00000034) #define MPI_HIM_RIM (0x00000008) #define MPI_HIM_DIM (0x00000001) #define MPI_REQUEST_QUEUE_OFFSET (0x00000040) #define MPI_REQUEST_POST_FIFO_OFFSET (0x00000040) #define MPI_REPLY_QUEUE_OFFSET (0x00000044) #define MPI_REPLY_POST_FIFO_OFFSET (0x00000044) #define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044) /***************************************************************************** * * M e s s a g e F r a m e D e s c r i p t o r s * *****************************************************************************/ #define MPI_REQ_MF_DESCRIPTOR_NB_MASK (0x00000003) #define MPI_REQ_MF_DESCRIPTOR_F_BIT (0x00000004) #define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK (0xFFFFFFF8) #define MPI_ADDRESS_REPLY_A_BIT (0x80000000) #define MPI_ADDRESS_REPLY_ADDRESS_MASK (0x7FFFFFFF) #define MPI_CONTEXT_REPLY_A_BIT (0x80000000) #define MPI_CONTEXT_REPLY_TYPE_MASK (0x60000000) #define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT (0x00) #define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET (0x01) #define MPI_CONTEXT_REPLY_TYPE_LAN (0x02) #define MPI_CONTEXT_REPLY_TYPE_SHIFT (29) #define MPI_CONTEXT_REPLY_CONTEXT_MASK (0x1FFFFFFF) /****************************************************************************/ /* Context Reply macros */ /****************************************************************************/ #define MPI_GET_CONTEXT_REPLY_TYPE(x) (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \ >> MPI_CONTEXT_REPLY_TYPE_SHIFT) #define MPI_SET_CONTEXT_REPLY_TYPE(x, typ) \ ((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) | \ (((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) & \ MPI_CONTEXT_REPLY_TYPE_MASK)) /***************************************************************************** * * M e s s a g e F u n c t i o n s * 0x80 -> 0x8F reserved for private message use per product * * *****************************************************************************/ #define MPI_FUNCTION_SCSI_IO_REQUEST (0x00) #define MPI_FUNCTION_SCSI_TASK_MGMT (0x01) #define MPI_FUNCTION_IOC_INIT (0x02) #define MPI_FUNCTION_IOC_FACTS (0x03) #define MPI_FUNCTION_CONFIG (0x04) #define MPI_FUNCTION_PORT_FACTS (0x05) #define MPI_FUNCTION_PORT_ENABLE (0x06) #define MPI_FUNCTION_EVENT_NOTIFICATION (0x07) #define MPI_FUNCTION_EVENT_ACK (0x08) #define MPI_FUNCTION_FW_DOWNLOAD (0x09) #define MPI_FUNCTION_TARGET_CMD_BUFFER_POST (0x0A) #define MPI_FUNCTION_TARGET_ASSIST (0x0B) #define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C) #define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D) #define MPI_FUNCTION_TARGET_FC_BUF_POST_LINK_SRVC (0x0E) /* obsolete name */ #define MPI_FUNCTION_TARGET_FC_RSP_LINK_SRVC (0x0F) /* obsolete name */ #define MPI_FUNCTION_TARGET_FC_EX_SEND_LINK_SRVC (0x10) /* obsolete name */ #define MPI_FUNCTION_TARGET_FC_ABORT (0x11) /* obsolete name */ #define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E) #define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F) #define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10) #define MPI_FUNCTION_FC_ABORT (0x11) #define MPI_FUNCTION_FW_UPLOAD (0x12) #define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND (0x13) #define MPI_FUNCTION_FC_PRIMITIVE_SEND (0x14) #define MPI_FUNCTION_RAID_ACTION (0x15) #define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) #define MPI_FUNCTION_TOOLBOX (0x17) #define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) #define MPI_FUNCTION_LAN_SEND (0x20) #define MPI_FUNCTION_LAN_RECEIVE (0x21) #define MPI_FUNCTION_LAN_RESET (0x22) #define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) #define MPI_FUNCTION_IO_UNIT_RESET (0x41) #define MPI_FUNCTION_HANDSHAKE (0x42) #define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43) /***************************************************************************** * * S c a t t e r G a t h e r E l e m e n t s * *****************************************************************************/ /****************************************************************************/ /* Simple element structures */ /****************************************************************************/ typedef struct _SGE_SIMPLE32 { U32 FlagsLength; U32 Address; } SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32, SGESimple32_t, MPI_POINTER pSGESimple32_t; typedef struct _SGE_SIMPLE64 { U32 FlagsLength; U64 Address; } SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64, SGESimple64_t, MPI_POINTER pSGESimple64_t; typedef struct _SGE_SIMPLE_UNION { U32 FlagsLength; union { U32 Address32; U64 Address64; } _u; } SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t, SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION; /****************************************************************************/ /* Chain element structures */ /****************************************************************************/ typedef struct _SGE_CHAIN32 { U16 Length; U8 NextChainOffset; U8 Flags; U32 Address; } SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32, SGEChain32_t, MPI_POINTER pSGEChain32_t; typedef struct _SGE_CHAIN64 { U16 Length; U8 NextChainOffset; U8 Flags; U64 Address; } SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64, SGEChain64_t, MPI_POINTER pSGEChain64_t; typedef struct _SGE_CHAIN_UNION { U16 Length; U8 NextChainOffset; U8 Flags; union { U32 Address32; U64 Address64; } _u; } SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION, SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t; /****************************************************************************/ /* Transaction Context element */ /****************************************************************************/ typedef struct _SGE_TRANSACTION32 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[1]; U32 TransactionDetails[1]; } SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32, SGETransaction32_t, MPI_POINTER pSGETransaction32_t; typedef struct _SGE_TRANSACTION64 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[2]; U32 TransactionDetails[1]; } SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64, SGETransaction64_t, MPI_POINTER pSGETransaction64_t; typedef struct _SGE_TRANSACTION96 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[3]; U32 TransactionDetails[1]; } SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96, SGETransaction96_t, MPI_POINTER pSGETransaction96_t; typedef struct _SGE_TRANSACTION128 { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; U32 TransactionContext[4]; U32 TransactionDetails[1]; } SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128, SGETransaction_t128, MPI_POINTER pSGETransaction_t128; typedef struct _SGE_TRANSACTION_UNION { U8 Reserved; U8 ContextSize; U8 DetailsLength; U8 Flags; union { U32 TransactionContext32[1]; U32 TransactionContext64[2]; U32 TransactionContext96[3]; U32 TransactionContext128[4]; } _u; U32 TransactionDetails[1]; } SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION, SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t; /****************************************************************************/ /* SGE IO types union for IO SGL's */ /****************************************************************************/ typedef struct _SGE_IO_UNION { union { SGE_SIMPLE_UNION Simple; SGE_CHAIN_UNION Chain; } _u; } SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION, SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t; /****************************************************************************/ /* SGE union for SGL's with Simple and Transaction elements */ /****************************************************************************/ typedef struct _SGE_TRANS_SIMPLE_UNION { union { SGE_SIMPLE_UNION Simple; SGE_TRANSACTION_UNION Transaction; } _u; } SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION, SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t; /****************************************************************************/ /* All SGE types union */ /****************************************************************************/ typedef struct _SGE_MPI_UNION { union { SGE_SIMPLE_UNION Simple; SGE_CHAIN_UNION Chain; SGE_TRANSACTION_UNION Transaction; } _u; } SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION, MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t, SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t; /****************************************************************************/ /* SGE field definition and masks */ /****************************************************************************/ /* Flags field bit definitions */ #define MPI_SGE_FLAGS_LAST_ELEMENT (0x80) #define MPI_SGE_FLAGS_END_OF_BUFFER (0x40) #define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) #define MPI_SGE_FLAGS_LOCAL_ADDRESS (0x08) #define MPI_SGE_FLAGS_DIRECTION (0x04) #define MPI_SGE_FLAGS_ADDRESS_SIZE (0x02) #define MPI_SGE_FLAGS_END_OF_LIST (0x01) #define MPI_SGE_FLAGS_SHIFT (24) #define MPI_SGE_LENGTH_MASK (0x00FFFFFF) #define MPI_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) /* Element Type */ #define MPI_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) #define MPI_SGE_FLAGS_SIMPLE_ELEMENT (0x10) #define MPI_SGE_FLAGS_CHAIN_ELEMENT (0x30) #define MPI_SGE_FLAGS_ELEMENT_MASK (0x30) /* Address location */ #define MPI_SGE_FLAGS_SYSTEM_ADDRESS (0x00) /* Direction */ #define MPI_SGE_FLAGS_IOC_TO_HOST (0x00) #define MPI_SGE_FLAGS_HOST_TO_IOC (0x04) /* Address Size */ #define MPI_SGE_FLAGS_32_BIT_ADDRESSING (0x00) #define MPI_SGE_FLAGS_64_BIT_ADDRESSING (0x02) /* Context Size */ #define MPI_SGE_FLAGS_32_BIT_CONTEXT (0x00) #define MPI_SGE_FLAGS_64_BIT_CONTEXT (0x02) #define MPI_SGE_FLAGS_96_BIT_CONTEXT (0x04) #define MPI_SGE_FLAGS_128_BIT_CONTEXT (0x06) #define MPI_SGE_CHAIN_OFFSET_MASK (0x00FF0000) #define MPI_SGE_CHAIN_OFFSET_SHIFT (16) /****************************************************************************/ /* SGE operation Macros */ /****************************************************************************/ /* SIMPLE FlagsLength manipulations... */ #define MPI_SGE_SET_FLAGS(f) ((U32)(f) << MPI_SGE_FLAGS_SHIFT) #define MPI_SGE_GET_FLAGS(fl) (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT) #define MPI_SGE_LENGTH(fl) ((fl) & MPI_SGE_LENGTH_MASK) #define MPI_SGE_CHAIN_LENGTH(fl) ((fl) & MPI_SGE_CHAIN_LENGTH_MASK) #define MPI_SGE_SET_FLAGS_LENGTH(f,l) (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l)) #define MPI_pSGE_GET_FLAGS(psg) MPI_SGE_GET_FLAGS((psg)->FlagsLength) #define MPI_pSGE_GET_LENGTH(psg) MPI_SGE_LENGTH((psg)->FlagsLength) #define MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l) /* CAUTION - The following are READ-MODIFY-WRITE! */ #define MPI_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f) #define MPI_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI_SGE_LENGTH(l) #define MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT) /***************************************************************************** * * S t a n d a r d M e s s a g e S t r u c t u r e s * *****************************************************************************/ /****************************************************************************/ /* Standard message request header for all request messages */ /****************************************************************************/ typedef struct _MSG_REQUEST_HEADER { U8 Reserved[2]; /* function specific */ U8 ChainOffset; U8 Function; U8 Reserved1[3]; /* function specific */ U8 MsgFlags; U32 MsgContext; } MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER, MPIHeader_t, MPI_POINTER pMPIHeader_t; /****************************************************************************/ /* Default Reply */ /****************************************************************************/ typedef struct _MSG_DEFAULT_REPLY { U8 Reserved[2]; /* function specific */ U8 MsgLength; U8 Function; U8 Reserved1[3]; /* function specific */ U8 MsgFlags; U32 MsgContext; U8 Reserved2[2]; /* function specific */ U16 IOCStatus; U32 IOCLogInfo; } MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY, MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t; /* MsgFlags definition for all replies */ #define MPI_MSGFLAGS_CONTINUATION_REPLY (0x80) /***************************************************************************** * * I O C S t a t u s V a l u e s * *****************************************************************************/ /****************************************************************************/ /* Common IOCStatus values for all replies */ /****************************************************************************/ #define MPI_IOCSTATUS_SUCCESS (0x0000) #define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001) #define MPI_IOCSTATUS_BUSY (0x0002) #define MPI_IOCSTATUS_INVALID_SGL (0x0003) #define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004) #define MPI_IOCSTATUS_RESERVED (0x0005) #define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) #define MPI_IOCSTATUS_INVALID_FIELD (0x0007) #define MPI_IOCSTATUS_INVALID_STATE (0x0008) /****************************************************************************/ /* Config IOCStatus values */ /****************************************************************************/ #define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) #define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) #define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) #define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) #define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) #define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) /****************************************************************************/ /* SCSIIO Reply (SPI & FCP) initiator values */ /****************************************************************************/ #define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) #define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041) #define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042) #define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) #define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) #define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) #define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) #define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) #define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) #define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) #define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) #define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) #define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) /****************************************************************************/ /* SCSI (SPI & FCP) target values */ /****************************************************************************/ #define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060) #define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061) #define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) #define MPI_IOCSTATUS_TARGET_ABORTED (0x0063) #define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) #define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) #define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) #define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B) /****************************************************************************/ /* Additional FCP target values */ /****************************************************************************/ #define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */ #define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID (0x0067) /* obsolete */ #define MPI_IOCSTATUS_TARGET_FC_DID_INVALID (0x0068) /* obsolete */ #define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069) /* obsolete */ /****************************************************************************/ /* Fibre Channel Direct Access values */ /****************************************************************************/ #define MPI_IOCSTATUS_FC_ABORTED (0x0066) #define MPI_IOCSTATUS_FC_RX_ID_INVALID (0x0067) #define MPI_IOCSTATUS_FC_DID_INVALID (0x0068) #define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT (0x0069) /****************************************************************************/ /* LAN values */ /****************************************************************************/ #define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND (0x0080) #define MPI_IOCSTATUS_LAN_DEVICE_FAILURE (0x0081) #define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR (0x0082) #define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED (0x0083) #define MPI_IOCSTATUS_LAN_RECEIVE_ERROR (0x0084) #define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED (0x0085) #define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086) #define MPI_IOCSTATUS_LAN_CANCELED (0x0087) /****************************************************************************/ /* IOCStatus flag to indicate that log info is available */ /****************************************************************************/ #define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) #define MPI_IOCSTATUS_MASK (0x7FFF) /****************************************************************************/ /* LogInfo Types */ /****************************************************************************/ #define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000) #define MPI_IOCLOGINFO_TYPE_NONE (0x0) #define MPI_IOCLOGINFO_TYPE_SCSI (0x1) #define MPI_IOCLOGINFO_TYPE_FC (0x2) #define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_CNFG.H * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * * MPI Version: 01.02.05 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 * fields to FC_DEVICE_0 page, updated the page version. * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages * and updated the page versions. * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 * page and updated the page version. * Added Information field and _INFO_PARAMS_NEGOTIATED * definitionto SCSI_DEVICE_0 page. * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the * page version. * Added BucketsRemaining to LAN_1 page, redefined the * state values, and updated the page version. * Revised bus width definitions in SCSI_PORT_0, * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page * version. * Moved FC_DEVICE_0 PageAddress description to spec. * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field * widths in IOC_0 page and updated the page version. * 11-02-00 01.01.01 Original release for post 1.0 work * Added Manufacturing pages, IO Unit Page 2, SCSI SPI * Port Page 2, FC Port Page 4, FC Port Page 5 * 11-15-00 01.01.02 Interim changes to match proposals * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. * 12-05-00 01.01.04 Modified config page actions. * 01-09-01 01.01.05 Added defines for page address formats. * Data size for Manufacturing pages 2 and 3 no longer * defined here. * Io Unit Page 2 size is fixed at 4 adapters and some * flags were changed. * SCSI Port Page 2 Device Settings modified. * New fields added to FC Port Page 0 and some flags * cleaned up. * Removed impedance flash from FC Port Page 1. * Added FC Port pages 6 and 7. * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. * Added some LinkType defines for FcPortPage0. * 02-20-01 01.01.08 Started using MPI_POINTER. * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with * MPI_CONFIG_PAGETYPE_RAID_VOLUME. * Added definitions and structures for IOC Page 2 and * RAID Volume Page 2. * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. * Added VendorId and ProductRevLevel fields to * RAIDVOL2_IM_PHYS_ID struct. * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ * defines to make them compatible to MPI version 1.0. * Added structure offset comments. * 04-09-01 01.01.11 Added some new defines for the PageAddress field and * removed some obsolete ones. * Added IO Unit Page 3. * Modified defines for Scsi Port Page 2. * Modified RAID Volume Pages. * 08-08-01 01.02.01 Original release for v1.2 work. * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. * Added defines for the SEP bits in RVP2 VolumeSettings. * Modified the DeviceSettings field in RVP2 to use the * proper structure. * Added defines for SES, SAF-TE, and cross channel for * IOCPage2 CapabilitiesFlags. * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. * Removed define for * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. * Added rejected bits to SCSI Device Page 0 Information. * Increased size of ALPA array in FC Port Page 2 by one * and removed a one byte reserved field. * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. * Added structures for Manufacturing Page 4, IO Unit * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and * RAID PhysDisk Page 0. * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. * Modified some of the new defines to make them 32 * character unique. * Modified how variable length pages (arrays) are defined. * Added generic defines for hot spare pools and RAID * volume types. * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. * -------------------------------------------------------------------------- */ #ifndef MPI_CNFG_H #define MPI_CNFG_H /***************************************************************************** * * C o n f i g M e s s a g e a n d S t r u c t u r e s * *****************************************************************************/ typedef struct _CONFIG_PAGE_HEADER { U8 PageVersion; /* 00h */ U8 PageLength; /* 01h */ U8 PageNumber; /* 02h */ U8 PageType; /* 03h */ } fCONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; typedef union _CONFIG_PAGE_HEADER_UNION { ConfigPageHeader_t Struct; U8 Bytes[4]; U16 Word16[2]; U32 Word32; } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, fCONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; /**************************************************************************** * PageType field values ****************************************************************************/ #define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00) #define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10) #define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20) #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30) #define MPI_CONFIG_PAGEATTR_MASK (0xF0) #define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00) #define MPI_CONFIG_PAGETYPE_IOC (0x01) #define MPI_CONFIG_PAGETYPE_BIOS (0x02) #define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03) #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04) #define MPI_CONFIG_PAGETYPE_FC_PORT (0x05) #define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06) #define MPI_CONFIG_PAGETYPE_LAN (0x07) #define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08) #define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09) #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) #define MPI_CONFIG_PAGETYPE_MASK (0x0F) #define MPI_CONFIG_TYPENUM_MASK (0x0FFF) /**************************************************************************** * PageAddress field values ****************************************************************************/ #define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) #define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) #define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) #define MPI_SCSI_DEVICE_BUS_SHIFT (8) #define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) #define MPI_FC_PORT_PGAD_PORT_SHIFT (28) #define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000) #define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000) #define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF) #define MPI_FC_PORT_PGAD_INDEX_SHIFT (0) #define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000) #define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28) #define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000) #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000) #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000) #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28) #define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF) #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0) #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000) #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8) #define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF) #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0) #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) /**************************************************************************** * Config Request Message ****************************************************************************/ typedef struct _MSG_CONFIG { U8 Action; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[8]; /* 0Ch */ fCONFIG_PAGE_HEADER Header; /* 14h */ U32 PageAddress; /* 18h */ SGE_IO_UNION PageBufferSGE; /* 1Ch */ } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, Config_t, MPI_POINTER pConfig_t; /**************************************************************************** * Action field values ****************************************************************************/ #define MPI_CONFIG_ACTION_PAGE_HEADER (0x00) #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) #define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03) #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) /* Config Reply Message */ typedef struct _MSG_CONFIG_REPLY { U8 Action; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[2]; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ fCONFIG_PAGE_HEADER Header; /* 14h */ } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, ConfigReply_t, MPI_POINTER pConfigReply_t; /***************************************************************************** * * C o n f i g u r a t i o n P a g e s * *****************************************************************************/ /**************************************************************************** * Manufacturing Config pages ****************************************************************************/ #define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621) #define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624) #define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) #define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) #define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) #define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) #define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032) #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033) #define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040) #define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) typedef struct _CONFIG_PAGE_MANUFACTURING_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 ChipName[16]; /* 04h */ U8 ChipRevision[8]; /* 14h */ U8 BoardName[16]; /* 1Ch */ U8 BoardAssembly[16]; /* 2Ch */ U8 BoardTracerNumber[16]; /* 3Ch */ } fCONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; #define MPI_MANUFACTURING0_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_MANUFACTURING_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 VPD[256]; /* 04h */ } fCONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; #define MPI_MANUFACTURING1_PAGEVERSION (0x00) typedef struct _MPI_CHIP_REVISION_ID { U16 DeviceID; /* 00h */ U8 PCIRevisionID; /* 02h */ U8 Reserved; /* 03h */ } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID, MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS /*#define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1)*/ /* MP: is this right? */ #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (16) #endif typedef struct _CONFIG_PAGE_MANUFACTURING_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ MPI_CHIP_REVISION_ID ChipId; /* 04h */ U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ } fCONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; #define MPI_MANUFACTURING2_PAGEVERSION (0x00) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_3_INFO_WORDS /*#define MPI_MAN_PAGE_3_INFO_WORDS (1)*/ /* MP: is this right? */ #define MPI_MAN_PAGE_3_INFO_WORDS (16) #endif typedef struct _CONFIG_PAGE_MANUFACTURING_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ MPI_CHIP_REVISION_ID ChipId; /* 04h */ U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ } fCONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; #define MPI_MANUFACTURING3_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_MANUFACTURING_4 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 04h */ U8 InfoOffset0; /* 08h */ U8 InfoSize0; /* 09h */ U8 InfoOffset1; /* 0Ah */ U8 InfoSize1; /* 0Bh */ U8 InquirySize; /* 0Ch */ U8 Reserved2; /* 0Dh */ U16 Reserved3; /* 0Eh */ U8 InquiryData[56]; /* 10h */ U32 ISVolumeSettings; /* 48h */ U32 IMEVolumeSettings; /* 4Ch */ U32 IMVolumeSettings; /* 50h */ } fCONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; #define MPI_MANUFACTURING4_PAGEVERSION (0x00) /**************************************************************************** * IO Unit Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_IO_UNIT_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U64 UniqueValue; /* 04h */ } fCONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; #define MPI_IOUNITPAGE0_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_IO_UNIT_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ } fCONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; #define MPI_IOUNITPAGE1_PAGEVERSION (0x00) /* IO Unit Page 1 Flags defines */ #define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) #define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001) #define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002) #define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000) #define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) #define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) typedef struct _MPI_ADAPTER_INFO { U8 PciBusNumber; /* 00h */ U8 PciDeviceAndFunctionNumber; /* 01h */ U16 AdapterFlags; /* 02h */ } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO, MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t; #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) typedef struct _CONFIG_PAGE_IO_UNIT_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U32 BiosVersion; /* 08h */ MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ } fCONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; #define MPI_IOUNITPAGE2_PAGEVERSION (0x00) #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008) #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) #endif typedef struct _CONFIG_PAGE_IO_UNIT_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 GPIOCount; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ } fCONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; #define MPI_IOUNITPAGE3_PAGEVERSION (0x01) #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC) #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00) #define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) /**************************************************************************** * IOC Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_IOC_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 TotalNVStore; /* 04h */ U32 FreeNVStore; /* 08h */ U16 VendorID; /* 0Ch */ U16 DeviceID; /* 0Eh */ U8 RevisionID; /* 10h */ U8 Reserved[3]; /* 11h */ U32 ClassCode; /* 14h */ U16 SubsystemVendorID; /* 18h */ U16 SubsystemID; /* 1Ah */ } fCONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, IOCPage0_t, MPI_POINTER pIOCPage0_t; #define MPI_IOCPAGE0_PAGEVERSION (0x01) typedef struct _CONFIG_PAGE_IOC_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U32 CoalescingTimeout; /* 08h */ U8 CoalescingDepth; /* 0Ch */ U8 Reserved[3]; /* 0Dh */ } fCONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, IOCPage1_t, MPI_POINTER pIOCPage1_t; #define MPI_IOCPAGE1_PAGEVERSION (0x00) #define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL { U8 VolumeID; /* 00h */ U8 VolumeBus; /* 01h */ U8 VolumeIOC; /* 02h */ U8 VolumePageNumber; /* 03h */ U8 VolumeType; /* 04h */ U8 Reserved2; /* 05h */ U16 Reserved3; /* 06h */ } fCONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX /* #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1) */ /* MP: is this the right way of doing this? */ #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (16) #endif typedef struct _CONFIG_PAGE_IOC_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 CapabilitiesFlags; /* 04h */ U8 NumActiveVolumes; /* 08h */ U8 MaxVolumes; /* 09h */ U8 NumActivePhysDisks; /* 0Ah */ U8 MaxPhysDisks; /* 0Bh */ fCONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ } fCONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, IOCPage2_t, MPI_POINTER pIOCPage2_t; #define MPI_IOCPAGE2_PAGEVERSION (0x01) /* IOC Page 2 Capabilities flags */ #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001) #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002) #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004) #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ #define MPI_RAID_VOL_TYPE_IS (0x00) #define MPI_RAID_VOL_TYPE_IME (0x01) #define MPI_RAID_VOL_TYPE_IM (0x02) typedef struct _IOC_3_PHYS_DISK { U8 PhysDiskID; /* 00h */ U8 PhysDiskBus; /* 01h */ U8 PhysDiskIOC; /* 02h */ U8 PhysDiskNum; /* 03h */ } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK, Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX /* #define MPI_IOC_PAGE_3_PHYSDISK_MAX (1) */ /* MP: is this the right way of doing this? */ #define MPI_IOC_PAGE_3_PHYSDISK_MAX (16) #endif typedef struct _CONFIG_PAGE_IOC_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 NumPhysDisks; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ } fCONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, IOCPage3_t, MPI_POINTER pIOCPage3_t; #define MPI_IOCPAGE3_PAGEVERSION (0x00) typedef struct _IOC_4_SEP { U8 SEPTargetID; /* 00h */ U8 SEPBus; /* 01h */ U16 Reserved; /* 02h */ } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP, Ioc4Sep_t, MPI_POINTER pIoc4Sep_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_4_SEP_MAX /* #define MPI_IOC_PAGE_4_SEP_MAX (1) */ /* MP: is this the right way of doing this? */ #define MPI_IOC_PAGE_4_SEP_MAX (16) #endif typedef struct _CONFIG_PAGE_IOC_4 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 ActiveSEP; /* 04h */ U8 MaxSEP; /* 05h */ U16 Reserved1; /* 06h */ IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ } fCONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, IOCPage4_t, MPI_POINTER pIOCPage4_t; #define MPI_IOCPAGE4_PAGEVERSION (0x00) /**************************************************************************** * SCSI Port Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_SCSI_PORT_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Capabilities; /* 04h */ U32 PhysicalInterface; /* 08h */ } fCONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; #define MPI_SCSIPORTPAGE0_PAGEVERSION (0x01) #define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) #define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) #define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004) #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00) #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) #define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03) typedef struct _CONFIG_PAGE_SCSI_PORT_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Configuration; /* 04h */ U32 OnBusTimerValue; /* 08h */ } fCONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; #define MPI_SCSIPORTPAGE1_PAGEVERSION (0x02) #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF) #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000) typedef struct _MPI_DEVICE_INFO { U8 Timeout; /* 00h */ U8 SyncFactor; /* 01h */ U16 DeviceFlags; /* 02h */ } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO, MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t; typedef struct _CONFIG_PAGE_SCSI_PORT_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 PortFlags; /* 04h */ U32 PortSettings; /* 08h */ MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ } fCONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; #define MPI_SCSIPORTPAGE2_PAGEVERSION (0x01) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010) #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F) #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030) #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000) #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010) #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020) #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030) #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0) #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00) #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000) #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000) #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000) #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000) #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001) #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002) #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004) #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008) #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010) #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020) /**************************************************************************** * SCSI Target Device Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 NegotiatedParameters; /* 04h */ U32 Information; /* 08h */ } fCONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; #define MPI_SCSIDEVPAGE0_PAGEVERSION (0x02) #define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) #define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) #define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004) #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00) #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) #define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001) #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002) #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004) #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008) typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 RequestedParameters; /* 04h */ U32 Reserved; /* 08h */ U32 Configuration; /* 0Ch */ } fCONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; #define MPI_SCSIDEVPAGE1_PAGEVERSION (0x03) #define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) #define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) #define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004) #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00) #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) #define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) #define MPI_SCSIDEVPAGE1_DV_LVD_DRIVE_STRENGTH_MASK (0x00000003) #define MPI_SCSIDEVPAGE1_DV_SE_SLEW_RATE_MASK (0x00000300) #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002) #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004) typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 DomainValidation; /* 04h */ U32 ParityPipeSelect; /* 08h */ U32 DataPipeSelect; /* 0Ch */ } fCONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; #define MPI_SCSIDEVPAGE2_PAGEVERSION (0x00) #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010) #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020) #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380) #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00) #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000) #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000) #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000) #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000) #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000) #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003) #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003) #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C) #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030) #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0) #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300) #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00) #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000) #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000) #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000) #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000) #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000) #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000) #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000) #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000) #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000) #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000) /**************************************************************************** * FC Port Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_FC_PORT_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U8 MPIPortNumber; /* 08h */ U8 LinkType; /* 09h */ U8 PortState; /* 0Ah */ U8 Reserved; /* 0Bh */ U32 PortIdentifier; /* 0Ch */ U64 WWNN; /* 10h */ U64 WWPN; /* 18h */ U32 SupportedServiceClass; /* 20h */ U32 SupportedSpeeds; /* 24h */ U32 CurrentSpeed; /* 28h */ U32 MaxFrameSize; /* 2Ch */ U64 FabricWWNN; /* 30h */ U64 FabricWWPN; /* 38h */ U32 DiscoveredPortsCount; /* 40h */ U32 MaxInitiators; /* 44h */ } fCONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, FCPortPage0_t, MPI_POINTER pFCPortPage0_t; #define MPI_FCPORTPAGE0_PAGEVERSION (0x01) #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F) #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR) #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET) #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN) #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010) #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020) #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000030) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800) #define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00) #define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01) #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02) #define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03) #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04) #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05) #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06) #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07) #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08) #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09) #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A) #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B) #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C) #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D) #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E) #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F) #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */ #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */ #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */ #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */ #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */ #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */ #define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */ #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */ #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001) #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002) #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004) #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */ #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */ #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */ #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED typedef struct _CONFIG_PAGE_FC_PORT_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U64 NoSEEPROMWWNN; /* 08h */ U64 NoSEEPROMWWPN; /* 10h */ U8 HardALPA; /* 18h */ U8 LinkConfig; /* 19h */ U8 TopologyConfig; /* 1Ah */ U8 Reserved; /* 1Bh */ } fCONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, FCPortPage1_t, MPI_POINTER pFCPortPage1_t; #define MPI_FCPORTPAGE1_PAGEVERSION (0x02) #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000) #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000) #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001) #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000) #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000) #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28) #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F) #define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F) #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01) #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02) #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F) typedef struct _CONFIG_PAGE_FC_PORT_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 NumberActive; /* 04h */ U8 ALPA[127]; /* 05h */ } fCONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, FCPortPage2_t, MPI_POINTER pFCPortPage2_t; #define MPI_FCPORTPAGE2_PAGEVERSION (0x01) typedef struct _WWN_FORMAT { U64 WWNN; /* 00h */ U64 WWPN; /* 08h */ } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT, WWNFormat, MPI_POINTER pWWNFormat; typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID { WWN_FORMAT WWN; U32 Did; } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID, PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t; typedef struct _FC_PORT_PERSISTENT { FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */ U8 TargetID; /* 10h */ U8 Bus; /* 11h */ U16 Flags; /* 12h */ } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT, PersistentData_t, MPI_POINTER pPersistentData_t; #define MPI_PERSISTENT_FLAGS_SHIFT (16) #define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001) #define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002) #define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004) #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008) #define MPI_PERSISTENT_FLAGS_BY_DID (0x0080) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX #define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1) #endif typedef struct _CONFIG_PAGE_FC_PORT_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ } fCONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, FCPortPage3_t, MPI_POINTER pFCPortPage3_t; #define MPI_FCPORTPAGE3_PAGEVERSION (0x01) typedef struct _CONFIG_PAGE_FC_PORT_4 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 PortFlags; /* 04h */ U32 PortSettings; /* 08h */ } fCONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, FCPortPage4_t, MPI_POINTER pFCPortPage4_t; #define MPI_FCPORTPAGE4_PAGEVERSION (0x00) #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008) #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030) #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000) #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010) #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020) #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030) #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0) #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00) typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO { U8 Flags; /* 00h */ U8 AliasAlpa; /* 01h */ U16 Reserved; /* 02h */ U64 AliasWWNN; /* 04h */ U64 AliasWWPN; /* 0Ch */ } fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_FC_PORT_PAGE_5_ALIAS_MAX #define MPI_FC_PORT_PAGE_5_ALIAS_MAX (1) #endif typedef struct _CONFIG_PAGE_FC_PORT_5 { fCONFIG_PAGE_HEADER Header; /* 00h */ fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo[MPI_FC_PORT_PAGE_5_ALIAS_MAX];/* 04h */ } fCONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, FCPortPage5_t, MPI_POINTER pFCPortPage5_t; #define MPI_FCPORTPAGE5_PAGEVERSION (0x00) #define MPI_FCPORTPAGE5_FLAGS_ALIAS_ALPA_VALID (0x01) #define MPI_FCPORTPAGE5_FLAGS_ALIAS_WWN_VALID (0x02) typedef struct _CONFIG_PAGE_FC_PORT_6 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U64 TimeSinceReset; /* 08h */ U64 TxFrames; /* 10h */ U64 RxFrames; /* 18h */ U64 TxWords; /* 20h */ U64 RxWords; /* 28h */ U64 LipCount; /* 30h */ U64 NosCount; /* 38h */ U64 ErrorFrames; /* 40h */ U64 DumpedFrames; /* 48h */ U64 LinkFailureCount; /* 50h */ U64 LossOfSyncCount; /* 58h */ U64 LossOfSignalCount; /* 60h */ U64 PrimativeSeqErrCount; /* 68h */ U64 InvalidTxWordCount; /* 70h */ U64 InvalidCrcCount; /* 78h */ U64 FcpInitiatorIoCount; /* 80h */ } fCONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, FCPortPage6_t, MPI_POINTER pFCPortPage6_t; #define MPI_FCPORTPAGE6_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_7 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U8 PortSymbolicName[256]; /* 08h */ } fCONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, FCPortPage7_t, MPI_POINTER pFCPortPage7_t; #define MPI_FCPORTPAGE7_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_8 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 BitVector[8]; /* 04h */ } fCONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, FCPortPage8_t, MPI_POINTER pFCPortPage8_t; #define MPI_FCPORTPAGE8_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_9 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U64 GlobalWWPN; /* 08h */ U64 GlobalWWNN; /* 10h */ U32 UnitType; /* 18h */ U32 PhysicalPortNumber; /* 1Ch */ U32 NumAttachedNodes; /* 20h */ U16 IPVersion; /* 24h */ U16 UDPPortNumber; /* 26h */ U8 IPAddress[16]; /* 28h */ U16 Reserved1; /* 38h */ U16 TopologyDiscoveryFlags; /* 3Ah */ } fCONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, FCPortPage9_t, MPI_POINTER pFCPortPage9_t; #define MPI_FCPORTPAGE9_PAGEVERSION (0x00) /**************************************************************************** * FC Device Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_FC_DEVICE_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U64 WWNN; /* 04h */ U64 WWPN; /* 0Ch */ U32 PortIdentifier; /* 14h */ U8 Protocol; /* 18h */ U8 Flags; /* 19h */ U16 BBCredit; /* 1Ah */ U16 MaxRxFrameSize; /* 1Ch */ U8 Reserved1; /* 1Eh */ U8 PortNumber; /* 1Fh */ U8 FcPhLowestVersion; /* 20h */ U8 FcPhHighestVersion; /* 21h */ U8 CurrentTargetID; /* 22h */ U8 CurrentBus; /* 23h */ } fCONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; #define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x02) #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01) #define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01) #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02) #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04) #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK) /**************************************************************************** * RAID Volume Config Pages ****************************************************************************/ typedef struct _RAID_VOL0_PHYS_DISK { U16 Reserved; /* 00h */ U8 PhysDiskMap; /* 02h */ U8 PhysDiskNum; /* 03h */ } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK, RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t; #define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01) #define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02) typedef struct _RAID_VOL0_STATUS { U8 Flags; /* 00h */ U8 State; /* 01h */ U16 Reserved; /* 02h */ } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS, RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t; /* RAID Volume Page 0 VolumeStatus defines */ #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01) #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02) #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04) #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) #define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) typedef struct _RAID_VOL0_SETTINGS { U16 Settings; /* 00h */ U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */ U8 Reserved; /* 02h */ } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS, RaidVol0Settings, MPI_POINTER pRaidVol0Settings; /* RAID Volume Page 0 VolumeSettings defines */ #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ #define MPI_RAID_HOT_SPARE_POOL_0 (0x01) #define MPI_RAID_HOT_SPARE_POOL_1 (0x02) #define MPI_RAID_HOT_SPARE_POOL_2 (0x04) #define MPI_RAID_HOT_SPARE_POOL_3 (0x08) #define MPI_RAID_HOT_SPARE_POOL_4 (0x10) #define MPI_RAID_HOT_SPARE_POOL_5 (0x20) #define MPI_RAID_HOT_SPARE_POOL_6 (0x40) #define MPI_RAID_HOT_SPARE_POOL_7 (0x80) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX /* #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) */ /* MP: is this the right way of doing this? */ #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (16) #endif typedef struct _CONFIG_PAGE_RAID_VOL_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 VolumeID; /* 04h */ U8 VolumeBus; /* 05h */ U8 VolumeIOC; /* 06h */ U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */ RAID_VOL0_STATUS VolumeStatus; /* 08h */ RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ U32 MaxLBA; /* 10h */ U32 Reserved1; /* 14h */ U32 StripeSize; /* 18h */ U32 Reserved2; /* 1Ch */ U32 Reserved3; /* 20h */ U8 NumPhysDisks; /* 24h */ U8 Reserved4; /* 25h */ U16 Reserved5; /* 26h */ RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ } fCONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; #define MPI_RAIDVOLPAGE0_PAGEVERSION (0x00) /**************************************************************************** * RAID Physical Disk Config Pages ****************************************************************************/ typedef struct _RAID_PHYS_DISK0_ERROR_DATA { U8 ErrorCdbByte; /* 00h */ U8 ErrorSenseKey; /* 01h */ U16 Reserved; /* 02h */ U16 ErrorCount; /* 04h */ U8 ErrorASC; /* 06h */ U8 ErrorASCQ; /* 07h */ U16 SmartCount; /* 08h */ U8 SmartASC; /* 0Ah */ U8 SmartASCQ; /* 0Bh */ } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA, RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t; typedef struct _RAID_PHYS_DISK_INQUIRY_DATA { U8 VendorID[8]; /* 00h */ U8 ProductID[16]; /* 08h */ U8 ProductRevLevel[4]; /* 18h */ U8 Info[32]; /* 1Ch */ } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA, RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData; typedef struct _RAID_PHYS_DISK0_SETTINGS { U8 SepID; /* 00h */ U8 SepBus; /* 01h */ U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */ U8 PhysDiskSettings; /* 03h */ } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS, RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t; typedef struct _RAID_PHYS_DISK0_STATUS { U8 Flags; /* 00h */ U8 State; /* 01h */ U16 Reserved; /* 02h */ } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS, RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t; /* RAID Volume 2 IM Physical Disk DiskStatus flags */ #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) #define MPI_PHYSDISK0_STATUS_ONLINE (0x00) #define MPI_PHYSDISK0_STATUS_MISSING (0x01) #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02) #define MPI_PHYSDISK0_STATUS_FAILED (0x03) #define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04) #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05) #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06) #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF) typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 PhysDiskID; /* 04h */ U8 PhysDiskBus; /* 05h */ U8 PhysDiskIOC; /* 06h */ U8 PhysDiskNum; /* 07h */ RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ U32 Reserved1; /* 0Ch */ U32 Reserved2; /* 10h */ U32 Reserved3; /* 14h */ U8 DiskIdentifier[16]; /* 18h */ RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ U32 MaxLBA; /* 68h */ RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ } fCONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x00) /**************************************************************************** * LAN Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_LAN_0 { ConfigPageHeader_t Header; /* 00h */ U16 TxRxModes; /* 04h */ U16 Reserved; /* 06h */ U32 PacketPrePad; /* 08h */ } fCONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, LANPage0_t, MPI_POINTER pLANPage0_t; #define MPI_LAN_PAGE0_PAGEVERSION (0x01) #define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000) #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001) #define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001) typedef struct _CONFIG_PAGE_LAN_1 { ConfigPageHeader_t Header; /* 00h */ U16 Reserved; /* 04h */ U8 CurrentDeviceState; /* 06h */ U8 Reserved1; /* 07h */ U32 MinPacketSize; /* 08h */ U32 MaxPacketSize; /* 0Ch */ U32 HardwareAddressLow; /* 10h */ U32 HardwareAddressHigh; /* 14h */ U32 MaxWireSpeedLow; /* 18h */ U32 MaxWireSpeedHigh; /* 1Ch */ U32 BucketsRemaining; /* 20h */ U32 MaxReplySize; /* 24h */ U32 NegWireSpeedLow; /* 28h */ U32 NegWireSpeedHigh; /* 2Ch */ } fCONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, LANPage1_t, MPI_POINTER pLANPage1_t; #define MPI_LAN_PAGE1_PAGEVERSION (0x03) #define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00) #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01) #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_FC.H * Title: MPI Fibre Channel messages and structures * Creation Date: June 12, 2000 * * MPI Version: 01.02.02 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure. * 11-02-00 01.01.01 Original release for post 1.0 work * 12-04-00 01.01.02 Added messages for Common Transport Send and * Primitive Send. * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix * and modified the FcPrimitiveSend flags. * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger * field. * Added FC_ABORT_TYPE_CT_SEND_REQUEST and * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request. * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND. * 02-20-01 01.01.05 Started using MPI_POINTER. * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED. * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define. * Added structure offset comments. * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST. * 08-08-01 01.02.01 Original release for v1.2 work. * 09-28-01 01.02.02 Change name of reserved field in * MSG_LINK_SERVICE_RSP_REPLY. * -------------------------------------------------------------------------- */ #ifndef MPI_FC_H #define MPI_FC_H /***************************************************************************** * * F C T a r g e t M o d e M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* Link Service Buffer Post messages */ /****************************************************************************/ typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REQUEST { U8 BufferPostFlags; /* 00h */ U8 BufferCount; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved; /* 04h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ SGE_TRANS_SIMPLE_UNION SGL; } MSG_LINK_SERVICE_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REQUEST, LinkServiceBufferPostRequest_t, MPI_POINTER pLinkServiceBufferPostRequest_t; #define LINK_SERVICE_BUFFER_POST_FLAGS_PORT_MASK (0x01) typedef struct _WWNFORMAT { U32 PortNameHigh; /* 00h */ U32 PortNameLow; /* 04h */ U32 NodeNameHigh; /* 08h */ U32 NodeNameLow; /* 0Ch */ } WWNFORMAT, WwnFormat_t; /* Link Service Buffer Post Reply */ typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REPLY { U8 Flags; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 TransferLength; /* 14h */ U32 TransactionContext; /* 18h */ U32 Rctl_Did; /* 1Ch */ U32 Csctl_Sid; /* 20h */ U32 Type_Fctl; /* 24h */ U16 SeqCnt; /* 28h */ U8 Dfctl; /* 2Ah */ U8 SeqId; /* 2Bh */ U16 Rxid; /* 2Ch */ U16 Oxid; /* 2Eh */ U32 Parameter; /* 30h */ WWNFORMAT Wwn; /* 34h */ } MSG_LINK_SERVICE_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY, LinkServiceBufferPostReply_t, MPI_POINTER pLinkServiceBufferPostReply_t; #define MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED (0x80) #define MPI_FC_DID_MASK (0x00FFFFFF) #define MPI_FC_DID_SHIFT (0) #define MPI_FC_RCTL_MASK (0xFF000000) #define MPI_FC_RCTL_SHIFT (24) #define MPI_FC_SID_MASK (0x00FFFFFF) #define MPI_FC_SID_SHIFT (0) #define MPI_FC_CSCTL_MASK (0xFF000000) #define MPI_FC_CSCTL_SHIFT (24) #define MPI_FC_FCTL_MASK (0x00FFFFFF) #define MPI_FC_FCTL_SHIFT (0) #define MPI_FC_TYPE_MASK (0xFF000000) #define MPI_FC_TYPE_SHIFT (24) /* obsolete name for the above */ #define FCP_TARGET_DID_MASK (0x00FFFFFF) #define FCP_TARGET_DID_SHIFT (0) #define FCP_TARGET_RCTL_MASK (0xFF000000) #define FCP_TARGET_RCTL_SHIFT (24) #define FCP_TARGET_SID_MASK (0x00FFFFFF) #define FCP_TARGET_SID_SHIFT (0) #define FCP_TARGET_CSCTL_MASK (0xFF000000) #define FCP_TARGET_CSCTL_SHIFT (24) #define FCP_TARGET_FCTL_MASK (0x00FFFFFF) #define FCP_TARGET_FCTL_SHIFT (0) #define FCP_TARGET_TYPE_MASK (0xFF000000) #define FCP_TARGET_TYPE_SHIFT (24) /****************************************************************************/ /* Link Service Response messages */ /****************************************************************************/ typedef struct _MSG_LINK_SERVICE_RSP_REQUEST { U8 RspFlags; /* 00h */ U8 RspLength; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 Rctl_Did; /* 0Ch */ U32 Csctl_Sid; /* 10h */ U32 Type_Fctl; /* 14h */ U16 SeqCnt; /* 18h */ U8 Dfctl; /* 1Ah */ U8 SeqId; /* 1Bh */ U16 Rxid; /* 1Ch */ U16 Oxid; /* 1Eh */ U32 Parameter; /* 20h */ SGE_SIMPLE_UNION SGL; /* 24h */ } MSG_LINK_SERVICE_RSP_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REQUEST, LinkServiceRspRequest_t, MPI_POINTER pLinkServiceRspRequest_t; #define LINK_SERVICE_RSP_FLAGS_IMMEDIATE (0x80) #define LINK_SERVICE_RSP_FLAGS_PORT_MASK (0x01) /* Link Service Response Reply */ typedef struct _MSG_LINK_SERVICE_RSP_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved_0100_InitiatorIndex; /* 06h */ /* obsolete InitiatorIndex */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 InitiatorIndex; /* 14h */ } MSG_LINK_SERVICE_RSP_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REPLY, LinkServiceRspReply_t, MPI_POINTER pLinkServiceRspReply_t; /****************************************************************************/ /* Extended Link Service Send messages */ /****************************************************************************/ typedef struct _MSG_EXLINK_SERVICE_SEND_REQUEST { U8 SendFlags; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U32 MsgFlags_Did; /* 04h */ U32 MsgContext; /* 08h */ U32 ElsCommandCode; /* 0Ch */ SGE_SIMPLE_UNION SGL; /* 10h */ } MSG_EXLINK_SERVICE_SEND_REQUEST, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REQUEST, ExLinkServiceSendRequest_t, MPI_POINTER pExLinkServiceSendRequest_t; #define EX_LINK_SERVICE_SEND_DID_MASK (0x00FFFFFF) #define EX_LINK_SERVICE_SEND_DID_SHIFT (0) #define EX_LINK_SERVICE_SEND_MSGFLAGS_MASK (0xFF000000) #define EX_LINK_SERVICE_SEND_MSGFLAGS_SHIFT (24) /* Extended Link Service Send Reply */ typedef struct _MSG_EXLINK_SERVICE_SEND_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 ResponseLength; /* 14h */ } MSG_EXLINK_SERVICE_SEND_REPLY, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REPLY, ExLinkServiceSendReply_t, MPI_POINTER pExLinkServiceSendReply_t; /****************************************************************************/ /* FC Abort messages */ /****************************************************************************/ typedef struct _MSG_FC_ABORT_REQUEST { U8 AbortFlags; /* 00h */ U8 AbortType; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 TransactionContextToAbort; /* 0Ch */ } MSG_FC_ABORT_REQUEST, MPI_POINTER PTR_MSG_FC_ABORT_REQUEST, FcAbortRequest_t, MPI_POINTER pFcAbortRequest_t; #define FC_ABORT_FLAG_PORT_MASK (0x01) #define FC_ABORT_TYPE_ALL_FC_BUFFERS (0x00) #define FC_ABORT_TYPE_EXACT_FC_BUFFER (0x01) #define FC_ABORT_TYPE_CT_SEND_REQUEST (0x02) #define FC_ABORT_TYPE_EXLINKSEND_REQUEST (0x03) /* FC Abort Reply */ typedef struct _MSG_FC_ABORT_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_FC_ABORT_REPLY, MPI_POINTER PTR_MSG_FC_ABORT_REPLY, FcAbortReply_t, MPI_POINTER pFcAbortReply_t; /****************************************************************************/ /* FC Common Transport Send messages */ /****************************************************************************/ typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REQUEST { U8 SendFlags; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U32 MsgFlags_Did; /* 04h */ U32 MsgContext; /* 08h */ U16 CTCommandCode; /* 0Ch */ U8 FsType; /* 0Eh */ U8 Reserved1; /* 0Fh */ SGE_SIMPLE_UNION SGL; /* 10h */ } MSG_FC_COMMON_TRANSPORT_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REQUEST, FcCommonTransportSendRequest_t, MPI_POINTER pFcCommonTransportSendRequest_t; #define MPI_FC_CT_SEND_DID_MASK (0x00FFFFFF) #define MPI_FC_CT_SEND_DID_SHIFT (0) #define MPI_FC_CT_SEND_MSGFLAGS_MASK (0xFF000000) #define MPI_FC_CT_SEND_MSGFLAGS_SHIFT (24) /* FC Common Transport Send Reply */ typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 ResponseLength; /* 14h */ } MSG_FC_COMMON_TRANSPORT_SEND_REPLY, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REPLY, FcCommonTransportSendReply_t, MPI_POINTER pFcCommonTransportSendReply_t; /****************************************************************************/ /* FC Primitive Send messages */ /****************************************************************************/ typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST { U8 SendFlags; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 FcPrimitive[4]; /* 0Ch */ } MSG_FC_PRIMITIVE_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REQUEST, FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t; #define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK (0x01) #define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK (0x04) #define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND (0x08) #define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE (0x10) #define MPI_FC_PRIM_SEND_FLAGS_SEND_AROUND (0x20) #define MPI_FC_PRIM_SEND_FLAGS_UNTIL_FULL (0x40) #define MPI_FC_PRIM_SEND_FLAGS_FOREVER (0x80) /* FC Primitive Send Reply */ typedef struct _MSG_FC_PRIMITIVE_SEND_REPLY { U8 SendFlags; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_FC_PRIMITIVE_SEND_REPLY, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REPLY, FcPrimitiveSendReply_t, MPI_POINTER pFcPrimitiveSendReply_t; #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_INIT.H * Title: MPI initiator mode messages and structures * Creation Date: June 8, 2000 * * MPI Version: 01.02.04 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions. * 11-02-00 01.01.01 Original release for post 1.0 work. * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT. * 02-20-01 01.01.03 Started using MPI_POINTER. * 03-27-01 01.01.04 Added structure offset comments. * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT. * 08-08-01 01.02.01 Original release for v1.2 work. * 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET. * Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for * MSG_SCSI_IO_REPLY. * 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure * Processor messages. * 10-04-01 01.02.04 Added defines for SEP request Action field. * -------------------------------------------------------------------------- */ #ifndef MPI_INIT_H #define MPI_INIT_H /***************************************************************************** * * S C S I I n i t i a t o r M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* SCSI IO messages and assocaited structures */ /****************************************************************************/ typedef struct _MSG_SCSI_IO_REQUEST { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 CDBLength; /* 04h */ U8 SenseBufferLength; /* 05h */ U8 Reserved; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 LUN[8]; /* 0Ch */ U32 Control; /* 14h */ U8 CDB[16]; /* 18h */ U32 DataLength; /* 28h */ U32 SenseBufferLowAddr; /* 2Ch */ SGE_IO_UNION SGL; /* 30h */ } MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST, SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t; /* SCSIO MsgFlags bits */ #define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01) #define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00) #define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01) #define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02) #define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00) #define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02) /* SCSIIO LUN fields */ #define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) #define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) #define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) #define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) #define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00) #define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00) /* SCSIO Control bits */ #define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) #define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) #define MPI_SCSIIO_CONTROL_WRITE (0x01000000) #define MPI_SCSIIO_CONTROL_READ (0x02000000) #define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000) #define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) #define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) #define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000) #define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100) #define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200) #define MPI_SCSIIO_CONTROL_ACAQ (0x00000400) #define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500) #define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700) #define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000) #define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000) #define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000) #define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000) #define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000) #define MPI_SCSIIO_CONTROL_RESERVED (0x00080000) #define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000) #define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000) #define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000) /* SCSIIO reply structure */ typedef struct _MSG_SCSI_IO_REPLY { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 CDBLength; /* 04h */ U8 SenseBufferLength; /* 05h */ U8 Reserved; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 SCSIStatus; /* 0Ch */ U8 SCSIState; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 TransferCount; /* 14h */ U32 SenseCount; /* 18h */ U32 ResponseInfo; /* 1Ch */ } MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY, SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t; /* SCSIIO Reply SCSIStatus values (SAM-2 status codes) */ #define MPI_SCSI_STATUS_SUCCESS (0x00) #define MPI_SCSI_STATUS_CHECK_CONDITION (0x02) #define MPI_SCSI_STATUS_CONDITION_MET (0x04) #define MPI_SCSI_STATUS_BUSY (0x08) #define MPI_SCSI_STATUS_INTERMEDIATE (0x10) #define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) #define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18) #define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22) #define MPI_SCSI_STATUS_TASK_SET_FULL (0x28) #define MPI_SCSI_STATUS_ACA_ACTIVE (0x30) /* SCSIIO Reply SCSIState values */ #define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01) #define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02) #define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04) #define MPI_SCSI_STATE_TERMINATED (0x08) #define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10) #define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20) /* SCSIIO Reply ResponseInfo values */ /* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */ #define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000) #define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000) #define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000) #define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000) #define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000) #define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000) #define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000) /****************************************************************************/ /* SCSI Task Management messages */ /****************************************************************************/ typedef struct _MSG_SCSI_TASK_MGMT { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved; /* 04h */ U8 TaskType; /* 05h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 LUN[8]; /* 0Ch */ U32 Reserved2[7]; /* 14h */ U32 TaskMsgContext; /* 30h */ } MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT, SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t; /* TaskType values */ #define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) #define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) #define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) #define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04) #define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) /* MsgFlags bits */ #define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) #define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02) #define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04) /* SCSI Task Management Reply */ typedef struct _MSG_SCSI_TASK_MGMT_REPLY { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved; /* 04h */ U8 TaskType; /* 05h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[2]; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 TerminationCount; /* 14h */ } MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY, SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t; /****************************************************************************/ /* SCSI Enclosure Processor messages */ /****************************************************************************/ typedef struct _MSG_SEP_REQUEST { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Action; /* 04h */ U8 Reserved1; /* 05h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 SlotStatus; /* 0Ch */ } MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST, SEPRequest_t, MPI_POINTER pSEPRequest_t; /* Action defines */ #define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00) #define MPI_SEP_REQ_ACTION_READ_STATUS (0x01) /* SlotStatus bits for MSG_SEP_REQUEST */ #define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) #define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) #define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) #define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) #define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) #define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020) #define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) #define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) #define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) #define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) #define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) #define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) #define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000) #define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000) #define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000) #define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000) #define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000) #define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000) typedef struct _MSG_SEP_REPLY { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Action; /* 04h */ U8 Reserved1; /* 05h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 SlotStatus; /* 14h */ } MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY, SEPReply_t, MPI_POINTER pSEPReply_t; /* SlotStatus bits for MSG_SEP_REPLY */ #define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) #define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) #define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) #define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) #define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) #define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020) #define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) #define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) #define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) #define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) #define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000) #define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) #define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) #define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000) #define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000) #define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000) #define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000) #define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000) #define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000) #define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000) #define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000) #define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000) #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_IOC.H * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: August 11, 2000 * * MPI Version: 01.02.04 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure. * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY. * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure. * Added _MSG_EVENT_ACK_REPLY structure. * Added _MSG_FW_DOWNLOAD_REPLY structure. * Added _MSG_TOOLBOX_REPLY structure. * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure. * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI, * _LINK_STATUS, _LOOP_STATE and _LOGOUT. * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in * _MSG_EVENT_ACK_REPLY structure to match specification. * 11-02-00 01.01.01 Original release for post 1.0 work. * Added a value for Manufacturer to WhoInit. * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and * removed toolbox message. * 01-09-01 01.01.03 Added event enabled and disabled defines. * Added structures for FwHeader and DataHeader. * Added ImageType to FwUpload reply. * 02-20-01 01.01.04 Started using MPI_POINTER. * 02-27-01 01.01.05 Added event for RAID status change and its event data. * Added IocNumber field to MSG_IOC_FACTS_REPLY. * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER. * Added structure offset comments. * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE. * 08-08-01 01.02.01 Original release for v1.2 work. * New format for FWVersion and ProductId in * MSG_IOC_FACTS_REPLY and MPI_FW_HEADER. * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and * related structure and defines. * Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED. * Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE. * Replaced a reserved field in MSG_IOC_FACTS_REPLY with * IOCExceptions and changed DataImageSize to reserved. * Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and * MPI_FW_UPLOAD_ITYPE_NVDATA. * 09-28-01 01.02.03 Modified Event Data for Integrated RAID. * 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field. * -------------------------------------------------------------------------- */ #ifndef MPI_IOC_H #define MPI_IOC_H /***************************************************************************** * * I O C M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* IOCInit message */ /****************************************************************************/ typedef struct _MSG_IOC_INIT { U8 WhoInit; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Flags; /* 04h */ U8 MaxDevices; /* 05h */ U8 MaxBuses; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 ReplyFrameSize; /* 0Ch */ U8 Reserved1[2]; /* 0Eh */ U32 HostMfaHighAddr; /* 10h */ U32 SenseBufferHighAddr; /* 14h */ } MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT, IOCInit_t, MPI_POINTER pIOCInit_t; /* WhoInit values */ #define MPI_WHOINIT_NO_ONE (0x00) #define MPI_WHOINIT_SYSTEM_BIOS (0x01) #define MPI_WHOINIT_ROM_BIOS (0x02) #define MPI_WHOINIT_PCI_PEER (0x03) #define MPI_WHOINIT_HOST_DRIVER (0x04) #define MPI_WHOINIT_MANUFACTURER (0x05) /* Flags values */ #define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01) typedef struct _MSG_IOC_INIT_REPLY { U8 WhoInit; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Flags; /* 04h */ U8 MaxDevices; /* 05h */ U8 MaxBuses; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_IOC_INIT_REPLY, MPI_POINTER PTR_MSG_IOC_INIT_REPLY, IOCInitReply_t, MPI_POINTER pIOCInitReply_t; /****************************************************************************/ /* IOC Facts message */ /****************************************************************************/ typedef struct _MSG_IOC_FACTS { U8 Reserved[2]; /* 00h */ U8 ChainOffset; /* 01h */ U8 Function; /* 02h */ U8 Reserved1[3]; /* 03h */ U8 MsgFlags; /* 04h */ U32 MsgContext; /* 08h */ } MSG_IOC_FACTS, MPI_POINTER PTR_IOC_FACTS, IOCFacts_t, MPI_POINTER pIOCFacts_t; typedef struct _MPI_FW_VERSION_STRUCT { U8 Dev; /* 00h */ U8 Unit; /* 01h */ U8 Minor; /* 02h */ U8 Major; /* 03h */ } MPI_FW_VERSION_STRUCT; typedef union _MPI_FW_VERSION { MPI_FW_VERSION_STRUCT Struct; U32 Word; } MPI_FW_VERSION; /* IOC Facts Reply */ typedef struct _MSG_IOC_FACTS_REPLY { U16 MsgVersion; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved; /* 04h */ U8 IOCNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 IOCExceptions; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U8 MaxChainDepth; /* 14h */ U8 WhoInit; /* 15h */ U8 BlockSize; /* 16h */ U8 Flags; /* 17h */ U16 ReplyQueueDepth; /* 18h */ U16 RequestFrameSize; /* 1Ah */ U16 Reserved_0101_FWVersion; /* 1Ch */ /* obsolete 16-bit FWVersion */ U16 ProductID; /* 1Eh */ U32 CurrentHostMfaHighAddr; /* 20h */ U16 GlobalCredits; /* 24h */ U8 NumberOfPorts; /* 26h */ U8 EventState; /* 27h */ U32 CurrentSenseBufferHighAddr; /* 28h */ U16 CurReplyFrameSize; /* 2Ch */ U8 MaxDevices; /* 2Eh */ U8 MaxBuses; /* 2Fh */ U32 FWImageSize; /* 30h */ U32 Reserved4; /* 34h */ MPI_FW_VERSION FWVersion; /* 38h */ } MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY, IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t; #define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) #define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) #define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01) #define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00) #define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01) /***************************************************************************** * * P o r t M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* Port Facts message and Reply */ /****************************************************************************/ typedef struct _MSG_PORT_FACTS { U8 Reserved[2]; /* 00h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[2]; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ } MSG_PORT_FACTS, MPI_POINTER PTR_MSG_PORT_FACTS, PortFacts_t, MPI_POINTER pPortFacts_t; typedef struct _MSG_PORT_FACTS_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U8 Reserved3; /* 14h */ U8 PortType; /* 15h */ U16 MaxDevices; /* 16h */ U16 PortSCSIID; /* 18h */ U16 ProtocolFlags; /* 1Ah */ U16 MaxPostedCmdBuffers; /* 1Ch */ U16 MaxPersistentIDs; /* 1Eh */ U16 MaxLanBuckets; /* 20h */ U16 Reserved4; /* 22h */ U32 Reserved5; /* 24h */ } MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY, PortFactsReply_t, MPI_POINTER pPortFactsReply_t; /* PortTypes values */ #define MPI_PORTFACTS_PORTTYPE_INACTIVE (0x00) #define MPI_PORTFACTS_PORTTYPE_SCSI (0x01) #define MPI_PORTFACTS_PORTTYPE_FC (0x10) /* ProtocolFlags values */ #define MPI_PORTFACTS_PROTOCOL_LOGBUSADDR (0x01) #define MPI_PORTFACTS_PROTOCOL_LAN (0x02) #define MPI_PORTFACTS_PROTOCOL_TARGET (0x04) #define MPI_PORTFACTS_PROTOCOL_INITIATOR (0x08) /****************************************************************************/ /* Port Enable Message */ /****************************************************************************/ typedef struct _MSG_PORT_ENABLE { U8 Reserved[2]; /* 00h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[2]; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ } MSG_PORT_ENABLE, MPI_POINTER PTR_MSG_PORT_ENABLE, PortEnable_t, MPI_POINTER pPortEnable_t; typedef struct _MSG_PORT_ENABLE_REPLY { U8 Reserved[2]; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[2]; /* 04h */ U8 PortNumber; /* 05h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_PORT_ENABLE_REPLY, MPI_POINTER PTR_MSG_PORT_ENABLE_REPLY, PortEnableReply_t, MPI_POINTER pPortEnableReply_t; /***************************************************************************** * * E v e n t M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* Event Notification messages */ /****************************************************************************/ typedef struct _MSG_EVENT_NOTIFY { U8 Switch; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ } MSG_EVENT_NOTIFY, MPI_POINTER PTR_MSG_EVENT_NOTIFY, EventNotification_t, MPI_POINTER pEventNotification_t; /* Event Notification Reply */ typedef struct _MSG_EVENT_NOTIFY_REPLY { U16 EventDataLength; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[2]; /* 04h */ U8 AckRequired; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[2]; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 Event; /* 14h */ U32 EventContext; /* 18h */ U32 Data[1]; /* 1Ch */ } MSG_EVENT_NOTIFY_REPLY, MPI_POINTER PTR_MSG_EVENT_NOTIFY_REPLY, EventNotificationReply_t, MPI_POINTER pEventNotificationReply_t; /* Event Acknowledge */ typedef struct _MSG_EVENT_ACK { U8 Reserved[2]; /* 00h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 Event; /* 0Ch */ U32 EventContext; /* 10h */ } MSG_EVENT_ACK, MPI_POINTER PTR_MSG_EVENT_ACK, EventAck_t, MPI_POINTER pEventAck_t; typedef struct _MSG_EVENT_ACK_REPLY { U8 Reserved[2]; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_EVENT_ACK_REPLY, MPI_POINTER PTR_MSG_EVENT_ACK_REPLY, EventAckReply_t, MPI_POINTER pEventAckReply_t; /* Switch */ #define MPI_EVENT_NOTIFICATION_SWITCH_OFF (0x00) #define MPI_EVENT_NOTIFICATION_SWITCH_ON (0x01) /* Event */ #define MPI_EVENT_NONE (0x00000000) #define MPI_EVENT_LOG_DATA (0x00000001) #define MPI_EVENT_STATE_CHANGE (0x00000002) #define MPI_EVENT_UNIT_ATTENTION (0x00000003) #define MPI_EVENT_IOC_BUS_RESET (0x00000004) #define MPI_EVENT_EXT_BUS_RESET (0x00000005) #define MPI_EVENT_RESCAN (0x00000006) #define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) #define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) #define MPI_EVENT_LOGOUT (0x00000009) #define MPI_EVENT_EVENT_CHANGE (0x0000000A) #define MPI_EVENT_INTEGRATED_RAID (0x0000000B) #define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) #define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) /* AckRequired field values */ #define MPI_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) #define MPI_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) /* EventChange Event data */ typedef struct _EVENT_DATA_EVENT_CHANGE { U8 EventState; /* 00h */ U8 Reserved; /* 01h */ U16 Reserved1; /* 02h */ } EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE, EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t; /* SCSI Event data for Port, Bus and Device forms */ typedef struct _EVENT_DATA_SCSI { U8 TargetID; /* 00h */ U8 BusPort; /* 01h */ U16 Reserved; /* 02h */ } EVENT_DATA_SCSI, MPI_POINTER PTR_EVENT_DATA_SCSI, EventDataScsi_t, MPI_POINTER pEventDataScsi_t; /* SCSI Device Status Change Event data */ typedef struct _EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 ReasonCode; /* 02h */ U8 LUN; /* 03h */ U8 ASC; /* 04h */ U8 ASCQ; /* 05h */ U16 Reserved; /* 06h */ } EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE, MPI_POINTER PTR_EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE, MpiEventDataScsiDeviceStatusChange_t, MPI_POINTER pMpiEventDataScsiDeviceStatusChange_t; /* MPI SCSI Device Status Change Event data ReasonCode values */ #define MPI_EVENT_SCSI_DEV_STAT_RC_ADDED (0x03) #define MPI_EVENT_SCSI_DEV_STAT_RC_NOT_RESPONDING (0x04) #define MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA (0x05) /* MPI Link Status Change Event data */ typedef struct _EVENT_DATA_LINK_STATUS { U8 State; /* 00h */ U8 Reserved; /* 01h */ U16 Reserved1; /* 02h */ U8 Reserved2; /* 04h */ U8 Port; /* 05h */ U16 Reserved3; /* 06h */ } EVENT_DATA_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_LINK_STATUS, EventDataLinkStatus_t, MPI_POINTER pEventDataLinkStatus_t; #define MPI_EVENT_LINK_STATUS_FAILURE (0x00000000) #define MPI_EVENT_LINK_STATUS_ACTIVE (0x00000001) /* MPI Loop State Change Event data */ typedef struct _EVENT_DATA_LOOP_STATE { U8 Character4; /* 00h */ U8 Character3; /* 01h */ U8 Type; /* 02h */ U8 Reserved; /* 03h */ U8 Reserved1; /* 04h */ U8 Port; /* 05h */ U16 Reserved2; /* 06h */ } EVENT_DATA_LOOP_STATE, MPI_POINTER PTR_EVENT_DATA_LOOP_STATE, EventDataLoopState_t, MPI_POINTER pEventDataLoopState_t; #define MPI_EVENT_LOOP_STATE_CHANGE_LIP (0x0001) #define MPI_EVENT_LOOP_STATE_CHANGE_LPE (0x0002) #define MPI_EVENT_LOOP_STATE_CHANGE_LPB (0x0003) /* MPI LOGOUT Event data */ typedef struct _EVENT_DATA_LOGOUT { U32 NPortID; /* 00h */ U8 Reserved; /* 04h */ U8 Port; /* 05h */ U16 Reserved1; /* 06h */ } EVENT_DATA_LOGOUT, MPI_POINTER PTR_EVENT_DATA_LOGOUT, EventDataLogout_t, MPI_POINTER pEventDataLogout_t; /* MPI Integrated RAID Event data */ typedef struct _EVENT_DATA_RAID { U8 VolumeID; /* 00h */ U8 VolumeBus; /* 01h */ U8 ReasonCode; /* 02h */ U8 PhysDiskNum; /* 03h */ U8 ASC; /* 04h */ U8 ASCQ; /* 05h */ U16 Reserved; /* 06h */ U32 SettingsStatus; /* 08h */ } EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID, MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t; /* MPI Integrated RAID Event data ReasonCode values */ #define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00) #define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01) #define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02) #define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03) #define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04) #define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05) #define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06) #define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07) #define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08) #define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09) #define MPI_EVENT_RAID_RC_SMART_DATA (0x0A) #define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B) /***************************************************************************** * * F i r m w a r e L o a d M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* Firmware Download message and associated structures */ /****************************************************************************/ typedef struct _MSG_FW_DOWNLOAD { U8 ImageType; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ SGE_MPI_UNION SGL; /* 0Ch */ } MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD, FWDownload_t, MPI_POINTER pFWDownload_t; #define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00) #define MPI_FW_DOWNLOAD_ITYPE_FW (0x01) #define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02) #define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03) typedef struct _FWDownloadTCSGE { U8 Reserved; /* 00h */ U8 ContextSize; /* 01h */ U8 DetailsLength; /* 02h */ U8 Flags; /* 03h */ U32 Reserved_0100_Checksum; /* 04h */ /* obsolete Checksum */ U32 ImageOffset; /* 08h */ U32 ImageSize; /* 0Ch */ } FW_DOWNLOAD_TCSGE, MPI_POINTER PTR_FW_DOWNLOAD_TCSGE, FWDownloadTCSGE_t, MPI_POINTER pFWDownloadTCSGE_t; /* Firmware Download reply */ typedef struct _MSG_FW_DOWNLOAD_REPLY { U8 ImageType; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_FW_DOWNLOAD_REPLY, MPI_POINTER PTR_MSG_FW_DOWNLOAD_REPLY, FWDownloadReply_t, MPI_POINTER pFWDownloadReply_t; /****************************************************************************/ /* Firmware Upload message and associated structures */ /****************************************************************************/ typedef struct _MSG_FW_UPLOAD { U8 ImageType; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ SGE_MPI_UNION SGL; /* 0Ch */ } MSG_FW_UPLOAD, MPI_POINTER PTR_MSG_FW_UPLOAD, FWUpload_t, MPI_POINTER pFWUpload_t; #define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM (0x00) #define MPI_FW_UPLOAD_ITYPE_FW_FLASH (0x01) #define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) #define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03) typedef struct _FWUploadTCSGE { U8 Reserved; /* 00h */ U8 ContextSize; /* 01h */ U8 DetailsLength; /* 02h */ U8 Flags; /* 03h */ U32 Reserved1; /* 04h */ U32 ImageOffset; /* 08h */ U32 ImageSize; /* 0Ch */ } FW_UPLOAD_TCSGE, MPI_POINTER PTR_FW_UPLOAD_TCSGE, FWUploadTCSGE_t, MPI_POINTER pFWUploadTCSGE_t; /* Firmware Upload reply */ typedef struct _MSG_FW_UPLOAD_REPLY { U8 ImageType; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 ActualImageSize; /* 14h */ } MSG_FW_UPLOAD_REPLY, MPI_POINTER PTR_MSG_FW_UPLOAD_REPLY, FWUploadReply_t, MPI_POINTER pFWUploadReply_t; typedef struct _MPI_FW_HEADER { U32 ArmBranchInstruction0; /* 00h */ U32 Signature0; /* 04h */ U32 Signature1; /* 08h */ U32 Signature2; /* 0Ch */ U32 ArmBranchInstruction1; /* 10h */ U32 ArmBranchInstruction2; /* 14h */ U32 Reserved; /* 18h */ U32 Checksum; /* 1Ch */ U16 VendorId; /* 20h */ U16 ProductId; /* 22h */ MPI_FW_VERSION FWVersion; /* 24h */ U32 SeqCodeVersion; /* 28h */ U32 ImageSize; /* 2Ch */ U32 NextImageHeaderOffset; /* 30h */ U32 LoadStartAddress; /* 34h */ U32 IopResetVectorValue; /* 38h */ U32 IopResetRegAddr; /* 3Ch */ U32 VersionNameWhat; /* 40h */ U8 VersionName[32]; /* 44h */ U32 VendorNameWhat; /* 64h */ U8 VendorName[32]; /* 68h */ } MPI_FW_HEADER, MPI_POINTER PTR_MPI_FW_HEADER, MpiFwHeader_t, MPI_POINTER pMpiFwHeader_t; #define MPI_FW_HEADER_WHAT_SIGNATURE (0x29232840) /* defines for using the ProductId field */ #define MPI_FW_HEADER_PID_TYPE_MASK (0xF000) #define MPI_FW_HEADER_PID_TYPE_SCSI (0x0000) #define MPI_FW_HEADER_PID_TYPE_FC (0x1000) #define MPI_FW_HEADER_PID_PROD_MASK (0x0F00) #define MPI_FW_HEADER_PID_PROD_INITIATOR_SCSI (0x0100) #define MPI_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) #define MPI_FW_HEADER_PID_PROD_TARGET_SCSI (0x0300) #define MPI_FW_HEADER_PID_PROD_IM_SCSI (0x0400) #define MPI_FW_HEADER_PID_PROD_IS_SCSI (0x0500) #define MPI_FW_HEADER_PID_PROD_CTX_SCSI (0x0600) #define MPI_FW_HEADER_PID_FAMILY_MASK (0x00FF) #define MPI_FW_HEADER_PID_FAMILY_1030A0_SCSI (0x0001) #define MPI_FW_HEADER_PID_FAMILY_1030B0_SCSI (0x0002) #define MPI_FW_HEADER_PID_FAMILY_1030B1_SCSI (0x0003) #define MPI_FW_HEADER_PID_FAMILY_1030C0_SCSI (0x0004) #define MPI_FW_HEADER_PID_FAMILY_1020A0_SCSI (0x0005) #define MPI_FW_HEADER_PID_FAMILY_1020B0_SCSI (0x0006) #define MPI_FW_HEADER_PID_FAMILY_1020B1_SCSI (0x0007) #define MPI_FW_HEADER_PID_FAMILY_1020C0_SCSI (0x0008) #define MPI_FW_HEADER_PID_FAMILY_1035A0_SCSI (0x0009) #define MPI_FW_HEADER_PID_FAMILY_1035B0_SCSI (0x000A) #define MPI_FW_HEADER_PID_FAMILY_909_FC (0x0000) #define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001) #define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002) typedef struct _MPI_EXT_IMAGE_HEADER { U8 ImageType; /* 00h */ U8 Reserved; /* 01h */ U16 Reserved1; /* 02h */ U32 Checksum; /* 04h */ U32 ImageSize; /* 08h */ U32 NextImageHeaderOffset; /* 0Ch */ U32 LoadStartAddress; /* 10h */ U32 Reserved2; /* 14h */ } MPI_EXT_IMAGE_HEADER, MPI_POINTER PTR_MPI_EXT_IMAGE_HEADER, MpiExtImageHeader_t, MPI_POINTER pMpiExtImageHeader_t; /* defines for the ImageType field */ #define MPI_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) #define MPI_EXT_IMAGE_TYPE_FW (0x01) #define MPI_EXT_IMAGE_TYPE_NVDATA (0x03) #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_LAN.H * Title: MPI LAN messages and structures * Creation Date: June 30, 2000 * * MPI Version: 01.02.01 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY. * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY. * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions. * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec. * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal. * Changed transaction context usage to bucket/buffer. * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition * to lan private header file * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Started using MPI_POINTER. * 03-27-01 01.01.03 Added structure offset comments. * 08-08-01 01.02.01 Original release for v1.2 work. * -------------------------------------------------------------------------- */ #ifndef MPI_LAN_H #define MPI_LAN_H /****************************************************************************** * * L A N M e s s a g e s * *******************************************************************************/ /* LANSend messages */ typedef struct _MSG_LAN_SEND_REQUEST { U16 Reserved; /* 00h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved2; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ SGE_MPI_UNION SG_List[1]; /* 0Ch */ } MSG_LAN_SEND_REQUEST, MPI_POINTER PTR_MSG_LAN_SEND_REQUEST, LANSendRequest_t, MPI_POINTER pLANSendRequest_t; typedef struct _MSG_LAN_SEND_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved2; /* 04h */ U8 NumberOfContexts; /* 05h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 BufferContext; /* 14h */ } MSG_LAN_SEND_REPLY, MPI_POINTER PTR_MSG_LAN_SEND_REPLY, LANSendReply_t, MPI_POINTER pLANSendReply_t; /* LANReceivePost */ typedef struct _MSG_LAN_RECEIVE_POST_REQUEST { U16 Reserved; /* 00h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved2; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 BucketCount; /* 0Ch */ SGE_MPI_UNION SG_List[1]; /* 10h */ } MSG_LAN_RECEIVE_POST_REQUEST, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REQUEST, LANReceivePostRequest_t, MPI_POINTER pLANReceivePostRequest_t; typedef struct _MSG_LAN_RECEIVE_POST_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved2; /* 04h */ U8 NumberOfContexts; /* 05h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 BucketsRemaining; /* 14h */ U32 PacketOffset; /* 18h */ U32 PacketLength; /* 1Ch */ U32 BucketContext[1]; /* 20h */ } MSG_LAN_RECEIVE_POST_REPLY, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REPLY, LANReceivePostReply_t, MPI_POINTER pLANReceivePostReply_t; /* LANReset */ typedef struct _MSG_LAN_RESET_REQUEST { U16 Reserved; /* 00h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved2; /* 04h */ U8 PortNumber; /* 05h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ } MSG_LAN_RESET_REQUEST, MPI_POINTER PTR_MSG_LAN_RESET_REQUEST, LANResetRequest_t, MPI_POINTER pLANResetRequest_t; typedef struct _MSG_LAN_RESET_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved2; /* 04h */ U8 PortNumber; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_LAN_RESET_REPLY, MPI_POINTER PTR_MSG_LAN_RESET_REPLY, LANResetReply_t, MPI_POINTER pLANResetReply_t; /****************************************************************************/ /* LAN Context Reply defines and macros */ /****************************************************************************/ #define LAN_REPLY_PACKET_LENGTH_MASK (0x0000FFFF) #define LAN_REPLY_PACKET_LENGTH_SHIFT (0) #define LAN_REPLY_BUCKET_CONTEXT_MASK (0x07FF0000) #define LAN_REPLY_BUCKET_CONTEXT_SHIFT (16) #define LAN_REPLY_BUFFER_CONTEXT_MASK (0x07FFFFFF) #define LAN_REPLY_BUFFER_CONTEXT_SHIFT (0) #define LAN_REPLY_FORM_MASK (0x18000000) #define LAN_REPLY_FORM_RECEIVE_SINGLE (0x00) #define LAN_REPLY_FORM_RECEIVE_MULTIPLE (0x01) #define LAN_REPLY_FORM_SEND_SINGLE (0x02) #define LAN_REPLY_FORM_MESSAGE_CONTEXT (0x03) #define LAN_REPLY_FORM_SHIFT (27) #define GET_LAN_PACKET_LENGTH(x) (((x) & LAN_REPLY_PACKET_LENGTH_MASK) \ >> LAN_REPLY_PACKET_LENGTH_SHIFT) #define SET_LAN_PACKET_LENGTH(x, lth) \ ((x) = ((x) & ~LAN_REPLY_PACKET_LENGTH_MASK) | \ (((lth) << LAN_REPLY_PACKET_LENGTH_SHIFT) & \ LAN_REPLY_PACKET_LENGTH_MASK)) #define GET_LAN_BUCKET_CONTEXT(x) (((x) & LAN_REPLY_BUCKET_CONTEXT_MASK) \ >> LAN_REPLY_BUCKET_CONTEXT_SHIFT) #define SET_LAN_BUCKET_CONTEXT(x, ctx) \ ((x) = ((x) & ~LAN_REPLY_BUCKET_CONTEXT_MASK) | \ (((ctx) << LAN_REPLY_BUCKET_CONTEXT_SHIFT) & \ LAN_REPLY_BUCKET_CONTEXT_MASK)) #define GET_LAN_BUFFER_CONTEXT(x) (((x) & LAN_REPLY_BUFFER_CONTEXT_MASK) \ >> LAN_REPLY_BUFFER_CONTEXT_SHIFT) #define SET_LAN_BUFFER_CONTEXT(x, ctx) \ ((x) = ((x) & ~LAN_REPLY_BUFFER_CONTEXT_MASK) | \ (((ctx) << LAN_REPLY_BUFFER_CONTEXT_SHIFT) & \ LAN_REPLY_BUFFER_CONTEXT_MASK)) #define GET_LAN_FORM(x) (((x) & LAN_REPLY_FORM_MASK) \ >> LAN_REPLY_FORM_SHIFT) #define SET_LAN_FORM(x, frm) \ ((x) = ((x) & ~LAN_REPLY_FORM_MASK) | \ (((frm) << LAN_REPLY_FORM_SHIFT) & \ LAN_REPLY_FORM_MASK)) /****************************************************************************/ /* LAN Current Device State defines */ /****************************************************************************/ #define MPI_LAN_DEVICE_STATE_RESET (0x00) #define MPI_LAN_DEVICE_STATE_OPERATIONAL (0x01) /****************************************************************************/ /* LAN Loopback defines */ /****************************************************************************/ #define MPI_LAN_TX_MODES_ENABLE_LOOPBACK_SUPPRESSION (0x01) #endif /* * Copyright (c) 2000, 2001 by LSI Logic Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * Name: MPI_TARG.H * Title: MPI Target mode messages and structures * Creation Date: June 22, 2000 * * MPI Version: 01.02.04 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure. * Corrected DECSRIPTOR typo to DESCRIPTOR. * 11-02-00 01.01.01 Original release for post 1.0 work * Modified target mode to use IoIndex instead of * HostIndex and IocIndex. Added Alias. * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER. * 02-20-01 01.01.03 Started using MPI_POINTER. * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and * MPI_TARGET_FCP_CMD_BUFFER. * 03-27-01 01.01.04 Added structure offset comments. * 08-08-01 01.02.01 Original release for v1.2 work. * 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU. * Added PriorityReason field to some replies and * defined more PriorityReason codes. * Added some defines for to support previous version * of MPI. * 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY. * 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY. * -------------------------------------------------------------------------- */ #ifndef MPI_TARG_H #define MPI_TARG_H /****************************************************************************** * * S C S I T a r g e t M e s s a g e s * *******************************************************************************/ typedef struct _CMD_BUFFER_DESCRIPTOR { U16 IoIndex; /* 00h */ U16 Reserved; /* 02h */ union /* 04h */ { U32 PhysicalAddress32; U64 PhysicalAddress64; } _u; } CMD_BUFFER_DESCRIPTOR, MPI_POINTER PTR_CMD_BUFFER_DESCRIPTOR, CmdBufferDescriptor_t, MPI_POINTER pCmdBufferDescriptor_t; /****************************************************************************/ /* Target Command Buffer Post Request */ /****************************************************************************/ typedef struct _MSG_TARGET_CMD_BUFFER_POST_REQUEST { U8 BufferPostFlags; /* 00h */ U8 BufferCount; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 BufferLength; /* 04h */ U8 Reserved; /* 05h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ CMD_BUFFER_DESCRIPTOR Buffer[1]; /* 0Ch */ } MSG_TARGET_CMD_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST, TargetCmdBufferPostRequest_t, MPI_POINTER pTargetCmdBufferPostRequest_t; #define CMD_BUFFER_POST_FLAGS_PORT_MASK (0x01) #define CMD_BUFFER_POST_FLAGS_ADDR_MODE_MASK (0x80) #define CMD_BUFFER_POST_FLAGS_ADDR_MODE_32 (0) #define CMD_BUFFER_POST_FLAGS_ADDR_MODE_64 (1) #define CMD_BUFFER_POST_FLAGS_64_BIT_ADDR (0x80) #define CMD_BUFFER_POST_IO_INDEX_MASK (0x00003FFF) #define CMD_BUFFER_POST_IO_INDEX_MASK_0100 (0x000003FF) /* obsolete */ typedef struct _MSG_TARGET_CMD_BUFFER_POST_REPLY { U8 BufferPostFlags; /* 00h */ U8 BufferCount; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 BufferLength; /* 04h */ U8 Reserved; /* 05h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved2; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_TARGET_CMD_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REPLY, TargetCmdBufferPostReply_t, MPI_POINTER pTargetCmdBufferPostReply_t; /* the following structure is obsolete as of MPI v1.2 */ typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 PriorityReason; /* 0Ch */ U8 Reserved3; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 ReplyWord; /* 14h */ } MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY, PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t; #define PRIORITY_REASON_NO_DISCONNECT (0x00) #define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01) #define PRIORITY_REASON_CMD_PARITY_ERR (0x02) #define PRIORITY_REASON_MSG_OUT_PARITY_ERR (0x03) #define PRIORITY_REASON_LQ_CRC_ERR (0x04) #define PRIORITY_REASON_CMD_CRC_ERR (0x05) #define PRIORITY_REASON_PROTOCOL_ERR (0x06) #define PRIORITY_REASON_DATA_OUT_PARITY_ERR (0x07) #define PRIORITY_REASON_DATA_OUT_CRC_ERR (0x08) #define PRIORITY_REASON_UNKNOWN (0xFF) typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 PriorityReason; /* 0Ch */ U8 Reserved3; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 ReplyWord; /* 14h */ } MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t; typedef struct _MPI_TARGET_FCP_CMD_BUFFER { U8 FcpLun[8]; /* 00h */ U8 FcpCntl[4]; /* 08h */ U8 FcpCdb[16]; /* 0Ch */ U32 FcpDl; /* 1Ch */ } MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER, MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer; typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER { /* SPI L_Q information unit */ U8 L_QType; /* 00h */ U8 Reserved; /* 01h */ U16 Tag; /* 02h */ U8 LogicalUnitNumber[8]; /* 04h */ U32 DataLength; /* 0Ch */ /* SPI command information unit */ U8 ReservedFirstByteOfCommandIU; /* 10h */ U8 TaskAttribute; /* 11h */ U8 TaskManagementFlags; /* 12h */ U8 AdditionalCDBLength; /* 13h */ U8 CDB[16]; /* 14h */ } MPI_TARGET_SCSI_SPI_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER, MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer; /****************************************************************************/ /* Target Assist Request */ /****************************************************************************/ typedef struct _MSG_TARGET_ASSIST_REQUEST { U8 StatusCode; /* 00h */ U8 TargetAssistFlags; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 QueueTag; /* 04h */ U8 Reserved; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 ReplyWord; /* 0Ch */ U8 LUN[8]; /* 10h */ U32 RelativeOffset; /* 18h */ U32 DataLength; /* 1Ch */ SGE_IO_UNION SGL[1]; /* 20h */ } MSG_TARGET_ASSIST_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_REQUEST, TargetAssistRequest_t, MPI_POINTER pTargetAssistRequest_t; #define TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01) #define TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02) #define TARGET_ASSIST_FLAGS_HIGH_PRIORITY (0x04) #define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) typedef struct _MSG_TARGET_ERROR_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 PriorityReason; /* 0Ch */ U8 Reserved3; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 ReplyWord; /* 14h */ U32 TransferCount; /* 18h */ } MSG_TARGET_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_ERROR_REPLY, TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t; /****************************************************************************/ /* Target Status Send Request */ /****************************************************************************/ typedef struct _MSG_TARGET_STATUS_SEND_REQUEST { U8 StatusCode; /* 00h */ U8 StatusFlags; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 QueueTag; /* 04h */ U8 Reserved; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 ReplyWord; /* 0Ch */ U8 LUN[8]; /* 10h */ SGE_SIMPLE_UNION StatusDataSGE; /* 18h */ } MSG_TARGET_STATUS_SEND_REQUEST, MPI_POINTER PTR_MSG_TARGET_STATUS_SEND_REQUEST, TargetStatusSendRequest_t, MPI_POINTER pTargetStatusSendRequest_t; #define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS (0x01) #define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY (0x04) #define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER (0x80) typedef struct _MPI_TARGET_FCP_RSP_BUFFER { U8 Reserved0[8]; /* 00h */ U8 FcpStatus; /* 08h */ U8 FcpFlags; /* 09h */ U8 Reserved1[2]; /* 0Ah */ U32 FcpResid; /* 0Ch */ U32 FcpSenseLength; /* 10h */ U32 FcpResponseLength; /* 14h */ U8 FcpResponseData[8]; /* 18h */ U8 FcpSenseData[32]; /* Pad to 64 bytes */ /* 20h */ } MPI_TARGET_FCP_RSP_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_RSP_BUFFER, MpiTargetFcpRspBuffer, MPI_POINTER pMpiTargetFcpRspBuffer; typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU { U8 Reserved0; /* 00h */ U8 Reserved1; /* 01h */ U8 Valid; /* 02h */ U8 Status; /* 03h */ U32 SenseDataListLength; /* 04h */ U32 PktFailuresListLength; /* 08h */ U8 SenseData[52]; /* Pad the IU to 64 bytes */ /* 0Ch */ } MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU, TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t; /****************************************************************************/ /* Target Mode Abort Request */ /****************************************************************************/ typedef struct _MSG_TARGET_MODE_ABORT_REQUEST { U8 AbortType; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 ReplyWord; /* 0Ch */ U32 MsgContextToAbort; /* 10h */ } MSG_TARGET_MODE_ABORT, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT, TargetModeAbort_t, MPI_POINTER pTargetModeAbort_t; #define TARGET_MODE_ABORT_TYPE_ALL_CMD_BUFFERS (0x00) #define TARGET_MODE_ABORT_TYPE_ALL_IO (0x01) #define TARGET_MODE_ABORT_TYPE_EXACT_IO (0x02) #define TARGET_MODE_ABORT_TYPE_EXACT_IO_REQUEST (0x03) /* Target Mode Abort Reply */ typedef struct _MSG_TARGET_MODE_ABORT_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 Reserved1; /* 04h */ U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 AbortCount; /* 14h */ } MSG_TARGET_MODE_ABORT_REPLY, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT_REPLY, TargetModeAbortReply_t, MPI_POINTER pTargetModeAbortReply_t; /****************************************************************************/ /* Target Mode Context Reply */ /****************************************************************************/ #define TARGET_MODE_REPLY_IO_INDEX_MASK (0x00003FFF) #define TARGET_MODE_REPLY_IO_INDEX_SHIFT (0) #define TARGET_MODE_REPLY_INITIATOR_INDEX_MASK (0x03FFC000) #define TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT (14) #define TARGET_MODE_REPLY_ALIAS_MASK (0x0C000000) #define TARGET_MODE_REPLY_ALIAS_SHIFT (26) #define TARGET_MODE_REPLY_PORT_MASK (0x10000000) #define TARGET_MODE_REPLY_PORT_SHIFT (28) #define GET_IO_INDEX(x) (((x) & TARGET_MODE_REPLY_IO_INDEX_MASK) \ >> TARGET_MODE_REPLY_IO_INDEX_SHIFT) #define SET_IO_INDEX(t, i) \ ((t) = ((t) & ~TARGET_MODE_REPLY_IO_INDEX_MASK) | \ (((i) << TARGET_MODE_REPLY_IO_INDEX_SHIFT) & \ TARGET_MODE_REPLY_IO_INDEX_MASK)) #define GET_INITIATOR_INDEX(x) (((x) & TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) \ >> TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) #define SET_INITIATOR_INDEX(t, ii) \ ((t) = ((t) & ~TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) | \ (((ii) << TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) & \ TARGET_MODE_REPLY_INITIATOR_INDEX_MASK)) #define GET_ALIAS(x) (((x) & TARGET_MODE_REPLY_ALIAS_MASK) \ >> TARGET_MODE_REPLY_ALIAS_SHIFT) #define SET_ALIAS(t, a) ((t) = ((t) & ~TARGET_MODE_REPLY_ALIAS_MASK) | \ (((a) << TARGET_MODE_REPLY_ALIAS_SHIFT) & \ TARGET_MODE_REPLY_ALIAS_MASK)) #define GET_PORT(x) (((x) & TARGET_MODE_REPLY_PORT_MASK) \ >> TARGET_MODE_REPLY_PORT_SHIFT) #define SET_PORT(t, p) ((t) = ((t) & ~TARGET_MODE_REPLY_PORT_MASK) | \ (((p) << TARGET_MODE_REPLY_PORT_SHIFT) & \ TARGET_MODE_REPLY_PORT_MASK)) /* the following obsolete values are for MPI v1.0 support */ #define TARGET_MODE_REPLY_0100_MASK_HOST_INDEX (0x000003FF) #define TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX (0) #define TARGET_MODE_REPLY_0100_MASK_IOC_INDEX (0x001FF800) #define TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX (11) #define TARGET_MODE_REPLY_0100_PORT_MASK (0x00400000) #define TARGET_MODE_REPLY_0100_PORT_SHIFT (22) #define TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX (0x1F800000) #define TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX (23) #define GET_HOST_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) \ >> TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) #define SET_HOST_INDEX_0100(t, hi) \ ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) | \ (((hi) << TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) & \ TARGET_MODE_REPLY_0100_MASK_HOST_INDEX)) #define GET_IOC_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) \ >> TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) #define SET_IOC_INDEX_0100(t, ii) \ ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) | \ (((ii) << TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) & \ TARGET_MODE_REPLY_0100_MASK_IOC_INDEX)) #define GET_INITIATOR_INDEX_0100(x) \ (((x) & TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) \ >> TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) #define SET_INITIATOR_INDEX_0100(t, ii) \ ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) | \ (((ii) << TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) & \ TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX)) #endif