/* $OpenBSD: ncr5380var.h,v 1.10 2003/10/21 18:58:49 jmc Exp $ */ /* $NetBSD: ncr5380var.h,v 1.6 1996/05/10 18:04:06 gwr Exp $ */ /* * Copyright (c) 1995 David Jones, Gordon W. Ross * Copyright (c) 1994 Jarle Greipsland * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the authors may not be used to endorse or promote products * derived from this software without specific prior written permission. * 4. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by * David Jones and Gordon Ross * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file defines the interface between the machine-dependent * module and the machine-independent ncr5380sbc.c module. */ #define SCI_CLR_INTR(sc) (*(sc)->sci_iack) #define SCI_BUSY(sc) (*sc->sci_bus_csr & SCI_BUS_BSY) /* These are NOT arbitrary, but map to bits in sci_tcmd */ #define PHASE_DATA_OUT 0x0 #define PHASE_DATA_IN 0x1 #define PHASE_COMMAND 0x2 #define PHASE_STATUS 0x3 #define PHASE_UNSPEC1 0x4 #define PHASE_UNSPEC2 0x5 #define PHASE_MSG_OUT 0x6 #define PHASE_MSG_IN 0x7 /* * This illegal phase is used to prevent the 5380 from having * a phase-match condition when we don't want one, such as * when setting up the DMA engine or whatever... */ #define PHASE_INVALID PHASE_UNSPEC1 /* Per-request state. This is required in order to support reselection. */ struct sci_req { struct scsi_xfer *sr_xs; /* Pointer to xfer struct, NULL=unused */ int sr_target, sr_lun; /* For fast access */ void *sr_dma_hand; /* Current DMA hnadle */ u_char *sr_dataptr; /* Saved data pointer */ int sr_datalen; int sr_flags; /* Internal error code */ #define SR_IMMED 1 /* Immediate command */ #define SR_SENSE 2 /* We are getting sense */ #define SR_OVERDUE 4 /* Timeout while not current */ #define SR_ERROR 8 /* Error occurred */ int sr_status; /* Status code from last cmd */ struct timeout sr_timeout; }; #define SCI_OPENINGS 16 /* How many commands we can enqueue. */ struct ncr5380_softc { struct device sc_dev; struct scsi_link sc_link; /* Pointers to 5380 registers. See ncr5380reg.h */ volatile u_char *sci_r0; volatile u_char *sci_r1; volatile u_char *sci_r2; volatile u_char *sci_r3; volatile u_char *sci_r4; volatile u_char *sci_r5; volatile u_char *sci_r6; volatile u_char *sci_r7; /* Functions set from MD code */ int (*sc_pio_out)(struct ncr5380_softc *, int, int, u_char *); int (*sc_pio_in)(struct ncr5380_softc *, int, int, u_char *); void (*sc_dma_alloc)(struct ncr5380_softc *); void (*sc_dma_free)(struct ncr5380_softc *); void (*sc_dma_setup)(struct ncr5380_softc *); void (*sc_dma_start)(struct ncr5380_softc *); void (*sc_dma_poll)(struct ncr5380_softc *); void (*sc_dma_eop)(struct ncr5380_softc *); void (*sc_dma_stop)(struct ncr5380_softc *); void (*sc_intr_on)(struct ncr5380_softc *); void (*sc_intr_off)(struct ncr5380_softc *); int sc_flags; /* Misc. flags and capabilities */ #define NCR5380_PERMIT_RESELECT 1 /* Allow disconnect/reselect */ #define NCR5380_FORCE_POLLING 2 /* Do not use interrupts. */ /* Set bits in this to disable disconnect per-target. */ int sc_no_disconnect; /* Set bits in this to disable parity for some target. */ int sc_parity_disable; int sc_min_dma_len; /* Smaller than this is done with PIO */ /* Begin MI shared data */ int sc_state; #define NCR_IDLE 0 /* Ready for new work. */ #define NCR_WORKING 0x01 /* Some command is in progress. */ #define NCR_ABORTING 0x02 /* Bailing out */ #define NCR_DOINGDMA 0x04 /* The FIFO data path is active! */ #define NCR_DROP_MSGIN 0x10 /* Discard all msgs (parity err detected) */ /* The request that has the bus now. */ struct sci_req *sc_current; /* Active data pointer for current SCSI command. */ u_char *sc_dataptr; int sc_datalen; /* Begin MI private data */ /* The number of operations in progress on the bus */ volatile int sc_ncmds; /* Ring buffer of pending/active requests */ struct sci_req sc_ring[SCI_OPENINGS]; int sc_rr; /* Round-robin scan pointer */ /* Active requests, by target/LUN */ struct sci_req *sc_matrix[8][8]; /* Message stuff */ int sc_prevphase; u_int sc_msgpriq; /* Messages we want to send */ u_int sc_msgoutq; /* Messages sent during last MESSAGE OUT */ u_int sc_msgout; /* Message last transmitted */ #define SEND_DEV_RESET 0x01 #define SEND_PARITY_ERROR 0x02 #define SEND_ABORT 0x04 #define SEND_REJECT 0x08 #define SEND_INIT_DET_ERR 0x10 #define SEND_IDENTIFY 0x20 #define SEND_SDTR 0x40 #define SEND_WDTR 0x80 #define NCR_MAX_MSG_LEN 8 u_char sc_omess[NCR_MAX_MSG_LEN]; u_char *sc_omp; /* Outgoing message pointer */ u_char sc_imess[NCR_MAX_MSG_LEN]; u_char *sc_imp; /* Incoming message pointer */ }; void ncr5380_init(struct ncr5380_softc *); void ncr5380_reset_scsibus(struct ncr5380_softc *); int ncr5380_intr(struct ncr5380_softc *); int ncr5380_scsi_cmd(struct scsi_xfer *); int ncr5380_pio_in(struct ncr5380_softc *, int, int, u_char *); int ncr5380_pio_out(struct ncr5380_softc *, int, int, u_char *); #ifdef NCR5380_DEBUG struct ncr5380_softc *ncr5380_debug_sc; void ncr5380_trace(char *msg, long val); #define NCR_TRACE(msg, val) ncr5380_trace(msg, val) #else /* NCR5380_DEBUG */ #define NCR_TRACE(msg, val) /* nada */ #endif /* NCR5380_DEBUG */