/* $OpenBSD: ncr53c9x.c,v 1.1 1997/02/27 13:57:21 briggs Exp $ */ /* $NetBSD: ncr53c9x.c,v 1.1 1997/02/27 01:12:07 thorpej Exp $ */ /* * Copyright (c) 1996 Charles M. Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles M. Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1994 Peter Galbavy * Copyright (c) 1995 Paul Kranenburg * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Peter Galbavy * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Based on aic6360 by Jarle Greipsland * * Acknowledgements: Many of the algorithms used in this driver are * inspired by the work of Julian Elischer (julian@tfs.com) and * Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million! */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include int ncr53c9x_debug = 0; /*NCR_SHOWPHASE|NCR_SHOWMISC|NCR_SHOWTRAC|NCR_SHOWCMDS;*/ /*static*/ void ncr53c9x_readregs __P((struct ncr53c9x_softc *)); /*static*/ void ncr53c9x_select __P((struct ncr53c9x_softc *, struct ncr53c9x_ecb *)); /*static*/ int ncr53c9x_reselect __P((struct ncr53c9x_softc *, int)); /*static*/ void ncr53c9x_scsi_reset __P((struct ncr53c9x_softc *)); /*static*/ void ncr53c9x_init __P((struct ncr53c9x_softc *, int)); /*static*/ int ncr53c9x_poll __P((struct ncr53c9x_softc *, struct scsi_xfer *, int)); /*static*/ void ncr53c9x_sched __P((struct ncr53c9x_softc *)); /*static*/ void ncr53c9x_done __P((struct ncr53c9x_softc *, struct ncr53c9x_ecb *)); /*static*/ void ncr53c9x_msgin __P((struct ncr53c9x_softc *)); /*static*/ void ncr53c9x_msgout __P((struct ncr53c9x_softc *)); /*static*/ void ncr53c9x_timeout __P((void *arg)); /*static*/ void ncr53c9x_abort __P((struct ncr53c9x_softc *, struct ncr53c9x_ecb *)); /*static*/ void ncr53c9x_dequeue __P((struct ncr53c9x_softc *, struct ncr53c9x_ecb *)); void ncr53c9x_sense __P((struct ncr53c9x_softc *, struct ncr53c9x_ecb *)); void ncr53c9x_free_ecb __P((struct ncr53c9x_softc *, struct ncr53c9x_ecb *, int)); struct ncr53c9x_ecb *ncr53c9x_get_ecb __P((struct ncr53c9x_softc *, int)); static inline int ncr53c9x_stp2cpb __P((struct ncr53c9x_softc *, int)); static inline void ncr53c9x_setsync __P((struct ncr53c9x_softc *, struct ncr53c9x_tinfo *)); /* * Names for the NCR53c9x variants, correspnding to the variant tags * in ncr53c9xvar.h. */ const char *ncr53c9x_variant_names[] = { "ESP100", "ESP100A", "ESP200", "NCR53C94", "NCR53C96", }; /* * Attach this instance, and then all the sub-devices */ void ncr53c9x_attach(sc, adapter, dev) struct ncr53c9x_softc *sc; struct scsi_adapter *adapter; struct scsi_device *dev; { /* * Note, the front-end has set us up to print the chip variation. */ if (sc->sc_rev >= NCR_VARIANT_MAX) { printf("\n%s: unknown variant %d, devices not attached\n", sc->sc_dev.dv_xname, sc->sc_rev); return; } printf(": %s, %dMHz, SCSI ID %d\n", ncr53c9x_variant_names[sc->sc_rev], sc->sc_freq, sc->sc_id); sc->sc_ccf = FREQTOCCF(sc->sc_freq); /* The value *must not* be == 1. Make it 2 */ if (sc->sc_ccf == 1) sc->sc_ccf = 2; /* * The recommended timeout is 250ms. This register is loaded * with a value calculated as follows, from the docs: * * (timout period) x (CLK frequency) * reg = ------------------------------------- * 8192 x (Clock Conversion Factor) * * Since CCF has a linear relation to CLK, this generally computes * to the constant of 153. */ sc->sc_timeout = ((250 * 1000) * sc->sc_freq) / (8192 * sc->sc_ccf); /* CCF register only has 3 bits; 0 is actually 8 */ sc->sc_ccf &= 7; /* Reset state & bus */ sc->sc_state = 0; ncr53c9x_init(sc, 1); /* * fill in the prototype scsi_link. */ sc->sc_link.adapter_softc = sc; sc->sc_link.adapter_target = sc->sc_id; sc->sc_link.adapter = adapter; sc->sc_link.device = dev; sc->sc_link.openings = 2; /* * Now try to attach all the sub-devices */ config_found(&sc->sc_dev, &sc->sc_link, scsiprint); } /* * This is the generic esp reset function. It does not reset the SCSI bus, * only this controllers, but kills any on-going commands, and also stops * and resets the DMA. * * After reset, registers are loaded with the defaults from the attach * routine above. */ void ncr53c9x_reset(sc) struct ncr53c9x_softc *sc; { /* reset DMA first */ NCRDMA_RESET(sc); /* reset SCSI chip */ NCRCMD(sc, NCRCMD_RSTCHIP); NCRCMD(sc, NCRCMD_NOP); DELAY(500); /* do these backwards, and fall through */ switch (sc->sc_rev) { case NCR_VARIANT_NCR53C94: case NCR_VARIANT_NCR53C96: case NCR_VARIANT_ESP200: NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); case NCR_VARIANT_ESP100A: NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); case NCR_VARIANT_ESP100: NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1); NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf); NCR_WRITE_REG(sc, NCR_SYNCOFF, 0); NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout); break; default: printf("%s: unknown revision code, assuming ESP100\n", sc->sc_dev.dv_xname); NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1); NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf); NCR_WRITE_REG(sc, NCR_SYNCOFF, 0); NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout); } } /* * Reset the SCSI bus, but not the chip */ void ncr53c9x_scsi_reset(sc) struct ncr53c9x_softc *sc; { (*sc->sc_glue->gl_dma_stop)(sc); printf("%s: resetting SCSI bus\n", sc->sc_dev.dv_xname); NCRCMD(sc, NCRCMD_RSTSCSI); } /* * Initialize esp state machine */ void ncr53c9x_init(sc, doreset) struct ncr53c9x_softc *sc; int doreset; { struct ncr53c9x_ecb *ecb; int r; NCR_TRACE(("[NCR_INIT(%d)] ", doreset)); if (sc->sc_state == 0) { /* First time through; initialize. */ TAILQ_INIT(&sc->ready_list); TAILQ_INIT(&sc->nexus_list); TAILQ_INIT(&sc->free_list); sc->sc_nexus = NULL; ecb = sc->sc_ecb; bzero(ecb, sizeof(sc->sc_ecb)); for (r = 0; r < sizeof(sc->sc_ecb) / sizeof(*ecb); r++) { TAILQ_INSERT_TAIL(&sc->free_list, ecb, chain); ecb++; } bzero(sc->sc_tinfo, sizeof(sc->sc_tinfo)); } else { /* Cancel any active commands. */ sc->sc_state = NCR_CLEANING; if ((ecb = sc->sc_nexus) != NULL) { ecb->xs->error = XS_DRIVER_STUFFUP; untimeout(ncr53c9x_timeout, ecb); ncr53c9x_done(sc, ecb); } while ((ecb = sc->nexus_list.tqh_first) != NULL) { ecb->xs->error = XS_DRIVER_STUFFUP; untimeout(ncr53c9x_timeout, ecb); ncr53c9x_done(sc, ecb); } } /* * reset the chip to a known state */ ncr53c9x_reset(sc); sc->sc_phase = sc->sc_prevphase = INVALID_PHASE; for (r = 0; r < 8; r++) { struct ncr53c9x_tinfo *ti = &sc->sc_tinfo[r]; /* XXX - config flags per target: low bits: no reselect; high bits: no synch */ int fl = sc->sc_dev.dv_cfdata->cf_flags; ti->flags = ((sc->sc_minsync && !(fl & (1<<(r+8)))) ? T_NEGOTIATE : 0) | ((fl & (1<period = sc->sc_minsync; ti->offset = 0; } if (doreset) { sc->sc_state = NCR_SBR; NCRCMD(sc, NCRCMD_RSTSCSI); } else { sc->sc_state = NCR_IDLE; } } /* * Read the NCR registers, and save their contents for later use. * NCR_STAT, NCR_STEP & NCR_INTR are mostly zeroed out when reading * NCR_INTR - so make sure it is the last read. * * I think that (from reading the docs) most bits in these registers * only make sense when he DMA CSR has an interrupt showing. Call only * if an interrupt is pending. */ void ncr53c9x_readregs(sc) struct ncr53c9x_softc *sc; { sc->sc_espstat = NCR_READ_REG(sc, NCR_STAT); /* Only the stepo bits are of interest */ sc->sc_espstep = NCR_READ_REG(sc, NCR_STEP) & NCRSTEP_MASK; sc->sc_espintr = NCR_READ_REG(sc, NCR_INTR); if (sc->sc_glue->gl_clear_latched_intr != NULL) (*sc->sc_glue->gl_clear_latched_intr)(sc); /* * Determine the SCSI bus phase, return either a real SCSI bus phase * or some pseudo phase we use to detect certain exceptions. */ sc->sc_phase = (sc->sc_espintr & NCRINTR_DIS) ? /* Disconnected */ BUSFREE_PHASE : sc->sc_espstat & NCRSTAT_PHASE; NCR_MISC(("regs[intr=%02x,stat=%02x,step=%02x] ", sc->sc_espintr, sc->sc_espstat, sc->sc_espstep)); } /* * Convert Synchronous Transfer Period to chip register Clock Per Byte value. */ static inline int ncr53c9x_stp2cpb(sc, period) struct ncr53c9x_softc *sc; int period; { int v; v = (sc->sc_freq * period) / 250; if (ncr53c9x_cpb2stp(sc, v) < period) /* Correct round-down error */ v++; return v; } static inline void ncr53c9x_setsync(sc, ti) struct ncr53c9x_softc *sc; struct ncr53c9x_tinfo *ti; { if (ti->flags & T_SYNCMODE) { NCR_WRITE_REG(sc, NCR_SYNCOFF, ti->offset); NCR_WRITE_REG(sc, NCR_SYNCTP, ncr53c9x_stp2cpb(sc, ti->period)); } else { NCR_WRITE_REG(sc, NCR_SYNCOFF, 0); NCR_WRITE_REG(sc, NCR_SYNCTP, 0); } } /* * Send a command to a target, set the driver state to NCR_SELECTING * and let the caller take care of the rest. * * Keeping this as a function allows me to say that this may be done * by DMA instead of programmed I/O soon. */ void ncr53c9x_select(sc, ecb) struct ncr53c9x_softc *sc; struct ncr53c9x_ecb *ecb; { struct scsi_link *sc_link = ecb->xs->sc_link; int target = sc_link->target; struct ncr53c9x_tinfo *ti = &sc->sc_tinfo[target]; u_char *cmd; int clen; NCR_TRACE(("[ncr53c9x_select(t%d,l%d,cmd:%x)] ", sc_link->target, sc_link->lun, ecb->cmd.opcode)); /* new state NCR_SELECTING */ sc->sc_state = NCR_SELECTING; NCRCMD(sc, NCRCMD_FLUSH); /* * The docs say the target register is never reset, and I * can't think of a better place to set it */ NCR_WRITE_REG(sc, NCR_SELID, target); ncr53c9x_setsync(sc, ti); /* * Who am I. This is where we tell the target that we are * happy for it to disconnect etc. */ NCR_WRITE_REG(sc, NCR_FIFO, MSG_IDENTIFY(sc_link->lun, (ti->flags & T_RSELECTOFF)?0:1)); if (ti->flags & T_NEGOTIATE) { /* Arbitrate, select and stop after IDENTIFY message */ NCRCMD(sc, NCRCMD_SELATNS); return; } /* Now the command into the FIFO */ cmd = (u_char *)&ecb->cmd; clen = ecb->clen; while (clen--) NCR_WRITE_REG(sc, NCR_FIFO, *cmd++); /* And get the targets attention */ NCRCMD(sc, NCRCMD_SELATN); } void ncr53c9x_free_ecb(sc, ecb, flags) struct ncr53c9x_softc *sc; struct ncr53c9x_ecb *ecb; int flags; { int s; s = splbio(); ecb->flags = 0; TAILQ_INSERT_HEAD(&sc->free_list, ecb, chain); /* * If there were none, wake anybody waiting for one to come free, * starting with queued entries. */ if (ecb->chain.tqe_next == 0) wakeup(&sc->free_list); splx(s); } struct ncr53c9x_ecb * ncr53c9x_get_ecb(sc, flags) struct ncr53c9x_softc *sc; int flags; { struct ncr53c9x_ecb *ecb; int s; s = splbio(); while ((ecb = sc->free_list.tqh_first) == NULL && (flags & SCSI_NOSLEEP) == 0) tsleep(&sc->free_list, PRIBIO, "especb", 0); if (ecb) { TAILQ_REMOVE(&sc->free_list, ecb, chain); ecb->flags |= ECB_ALLOC; } splx(s); return ecb; } /* * DRIVER FUNCTIONS CALLABLE FROM HIGHER LEVEL DRIVERS */ /* * Start a SCSI-command * This function is called by the higher level SCSI-driver to queue/run * SCSI-commands. */ int ncr53c9x_scsi_cmd(xs) struct scsi_xfer *xs; { struct scsi_link *sc_link = xs->sc_link; struct ncr53c9x_softc *sc = sc_link->adapter_softc; struct ncr53c9x_ecb *ecb; int s, flags; NCR_TRACE(("[ncr53c9x_scsi_cmd] ")); NCR_CMDS(("[0x%x, %d]->%d ", (int)xs->cmd->opcode, xs->cmdlen, sc_link->target)); flags = xs->flags; if ((ecb = ncr53c9x_get_ecb(sc, flags)) == NULL) { xs->error = XS_DRIVER_STUFFUP; return TRY_AGAIN_LATER; } /* Initialize ecb */ ecb->xs = xs; ecb->timeout = xs->timeout; if (xs->flags & SCSI_RESET) { ecb->flags |= ECB_RESET; ecb->clen = 0; ecb->dleft = 0; } else { bcopy(xs->cmd, &ecb->cmd, xs->cmdlen); ecb->clen = xs->cmdlen; ecb->daddr = xs->data; ecb->dleft = xs->datalen; } ecb->stat = 0; s = splbio(); TAILQ_INSERT_TAIL(&sc->ready_list, ecb, chain); if (sc->sc_state == NCR_IDLE) ncr53c9x_sched(sc); splx(s); if ((flags & SCSI_POLL) == 0) return SUCCESSFULLY_QUEUED; /* Not allowed to use interrupts, use polling instead */ if (ncr53c9x_poll(sc, xs, ecb->timeout)) { ncr53c9x_timeout(ecb); if (ncr53c9x_poll(sc, xs, ecb->timeout)) ncr53c9x_timeout(ecb); } return COMPLETE; } /* * Used when interrupt driven I/O isn't allowed, e.g. during boot. */ int ncr53c9x_poll(sc, xs, count) struct ncr53c9x_softc *sc; struct scsi_xfer *xs; int count; { NCR_TRACE(("[ncr53c9x_poll] ")); while (count) { if (NCRDMA_ISINTR(sc)) { ncr53c9x_intr(sc); } #if alternatively if (NCR_READ_REG(sc, NCR_STAT) & NCRSTAT_INT) ncr53c9x_intr(sc); #endif if ((xs->flags & ITSDONE) != 0) return 0; if (sc->sc_state == NCR_IDLE) { NCR_TRACE(("[ncr53c9x_poll: rescheduling] ")); ncr53c9x_sched(sc); } DELAY(1000); count--; } return 1; } /* * LOW LEVEL SCSI UTILITIES */ /* * Schedule a scsi operation. This has now been pulled out of the interrupt * handler so that we may call it from ncr53c9x_scsi_cmd and ncr53c9x_done. * This may save us an unecessary interrupt just to get things going. * Should only be called when state == NCR_IDLE and at bio pl. */ void ncr53c9x_sched(sc) struct ncr53c9x_softc *sc; { struct ncr53c9x_ecb *ecb; struct scsi_link *sc_link; struct ncr53c9x_tinfo *ti; NCR_TRACE(("[ncr53c9x_sched] ")); if (sc->sc_state != NCR_IDLE) panic("ncr53c9x_sched: not IDLE (state=%d)", sc->sc_state); /* * Find first ecb in ready queue that is for a target/lunit * combinations that is not busy. */ for (ecb = sc->ready_list.tqh_first; ecb; ecb = ecb->chain.tqe_next) { sc_link = ecb->xs->sc_link; ti = &sc->sc_tinfo[sc_link->target]; if ((ti->lubusy & (1 << sc_link->lun)) == 0) { TAILQ_REMOVE(&sc->ready_list, ecb, chain); sc->sc_nexus = ecb; ncr53c9x_select(sc, ecb); break; } else NCR_MISC(("%d:%d busy\n", sc_link->target, sc_link->lun)); } } void ncr53c9x_sense(sc, ecb) struct ncr53c9x_softc *sc; struct ncr53c9x_ecb *ecb; { struct scsi_xfer *xs = ecb->xs; struct scsi_link *sc_link = xs->sc_link; struct ncr53c9x_tinfo *ti = &sc->sc_tinfo[sc_link->target]; struct scsi_sense *ss = (void *)&ecb->cmd; NCR_MISC(("requesting sense ")); /* Next, setup a request sense command block */ bzero(ss, sizeof(*ss)); ss->opcode = REQUEST_SENSE; ss->byte2 = sc_link->lun << 5; ss->length = sizeof(struct scsi_sense_data); ecb->clen = sizeof(*ss); ecb->daddr = (char *)&xs->sense; ecb->dleft = sizeof(struct scsi_sense_data); ecb->flags |= ECB_SENSE; ti->senses++; if (ecb->flags & ECB_NEXUS) ti->lubusy &= ~(1 << sc_link->lun); if (ecb == sc->sc_nexus) { ncr53c9x_select(sc, ecb); } else { ncr53c9x_dequeue(sc, ecb); TAILQ_INSERT_HEAD(&sc->ready_list, ecb, chain); if (sc->sc_state == NCR_IDLE) ncr53c9x_sched(sc); } } /* * POST PROCESSING OF SCSI_CMD (usually current) */ void ncr53c9x_done(sc, ecb) struct ncr53c9x_softc *sc; struct ncr53c9x_ecb *ecb; { struct scsi_xfer *xs = ecb->xs; struct scsi_link *sc_link = xs->sc_link; struct ncr53c9x_tinfo *ti = &sc->sc_tinfo[sc_link->target]; NCR_TRACE(("[ncr53c9x_done(error:%x)] ", xs->error)); /* * Now, if we've come here with no error code, i.e. we've kept the * initial XS_NOERROR, and the status code signals that we should * check sense, we'll need to set up a request sense cmd block and * push the command back into the ready queue *before* any other * commands for this target/lunit, else we lose the sense info. * We don't support chk sense conditions for the request sense cmd. */ if (xs->error == XS_NOERROR) { if ((ecb->flags & ECB_ABORT) != 0) { xs->error = XS_DRIVER_STUFFUP; } else if ((ecb->flags & ECB_SENSE) != 0) { xs->error = XS_SENSE; } else if ((ecb->stat & ST_MASK) == SCSI_CHECK) { /* First, save the return values */ xs->resid = ecb->dleft; xs->status = ecb->stat; ncr53c9x_sense(sc, ecb); return; } else { xs->resid = ecb->dleft; } } xs->flags |= ITSDONE; #ifdef NCR53C9X_DEBUG if (ncr53c9x_debug & NCR_SHOWMISC) { if (xs->resid != 0) printf("resid=%d ", xs->resid); if (xs->error == XS_SENSE) printf("sense=0x%02x\n", xs->sense.error_code); else printf("error=%d\n", xs->error); } #endif /* * Remove the ECB from whatever queue it's on. */ if (ecb->flags & ECB_NEXUS) ti->lubusy &= ~(1 << sc_link->lun); if (ecb == sc->sc_nexus) { sc->sc_nexus = NULL; sc->sc_state = NCR_IDLE; ncr53c9x_sched(sc); } else ncr53c9x_dequeue(sc, ecb); ncr53c9x_free_ecb(sc, ecb, xs->flags); ti->cmds++; scsi_done(xs); } void ncr53c9x_dequeue(sc, ecb) struct ncr53c9x_softc *sc; struct ncr53c9x_ecb *ecb; { if (ecb->flags & ECB_NEXUS) { TAILQ_REMOVE(&sc->nexus_list, ecb, chain); } else { TAILQ_REMOVE(&sc->ready_list, ecb, chain); } } /* * INTERRUPT/PROTOCOL ENGINE */ /* * Schedule an outgoing message by prioritizing it, and asserting * attention on the bus. We can only do this when we are the initiator * else there will be an illegal command interrupt. */ #define ncr53c9x_sched_msgout(m) \ do { \ NCR_MISC(("ncr53c9x_sched_msgout %d ", m)); \ NCRCMD(sc, NCRCMD_SETATN); \ sc->sc_flags |= NCR_ATN; \ sc->sc_msgpriq |= (m); \ } while (0) int ncr53c9x_reselect(sc, message) struct ncr53c9x_softc *sc; int message; { u_char selid, target, lun; struct ncr53c9x_ecb *ecb; struct scsi_link *sc_link; struct ncr53c9x_tinfo *ti; /* * The SCSI chip made a snapshot of the data bus while the reselection * was being negotiated. This enables us to determine which target did * the reselect. */ selid = sc->sc_selid & ~(1 << sc->sc_id); if (selid & (selid - 1)) { printf("%s: reselect with invalid selid %02x;" " sending DEVICE RESET\n", sc->sc_dev.dv_xname, selid); goto reset; } /* * Search wait queue for disconnected cmd * The list should be short, so I haven't bothered with * any more sophisticated structures than a simple * singly linked list. */ target = ffs(selid) - 1; lun = message & 0x07; for (ecb = sc->nexus_list.tqh_first; ecb != NULL; ecb = ecb->chain.tqe_next) { sc_link = ecb->xs->sc_link; if (sc_link->target == target && sc_link->lun == lun) break; } if (ecb == NULL) { printf("%s: reselect from target %d lun %d with no nexus;" " sending ABORT\n", sc->sc_dev.dv_xname, target, lun); goto abort; } /* Make this nexus active again. */ TAILQ_REMOVE(&sc->nexus_list, ecb, chain); sc->sc_state = NCR_CONNECTED; sc->sc_nexus = ecb; ti = &sc->sc_tinfo[target]; ti->lubusy |= (1 << lun); ncr53c9x_setsync(sc, ti); if (ecb->flags & ECB_RESET) ncr53c9x_sched_msgout(SEND_DEV_RESET); else if (ecb->flags & ECB_ABORT) ncr53c9x_sched_msgout(SEND_ABORT); /* Do an implicit RESTORE POINTERS. */ sc->sc_dp = ecb->daddr; sc->sc_dleft = ecb->dleft; return (0); reset: ncr53c9x_sched_msgout(SEND_DEV_RESET); return (1); abort: ncr53c9x_sched_msgout(SEND_ABORT); return (1); } #define IS1BYTEMSG(m) (((m) != 1 && (m) < 0x20) || (m) & 0x80) #define IS2BYTEMSG(m) (((m) & 0xf0) == 0x20) #define ISEXTMSG(m) ((m) == 1) /* * Get an incoming message as initiator. * * The SCSI bus must already be in MESSAGE_IN_PHASE and there is a * byte in the FIFO */ void ncr53c9x_msgin(sc) register struct ncr53c9x_softc *sc; { register int v; NCR_TRACE(("[ncr53c9x_msgin(curmsglen:%ld)] ", (long)sc->sc_imlen)); if ((NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) == 0) { printf("%s: msgin: no msg byte available\n", sc->sc_dev.dv_xname); return; } /* * Prepare for a new message. A message should (according * to the SCSI standard) be transmitted in one single * MESSAGE_IN_PHASE. If we have been in some other phase, * then this is a new message. */ if (sc->sc_prevphase != MESSAGE_IN_PHASE) { sc->sc_flags &= ~NCR_DROP_MSGI; sc->sc_imlen = 0; } v = NCR_READ_REG(sc, NCR_FIFO); NCR_MISC(("", v)); #if 0 if (sc->sc_state == NCR_RESELECTED && sc->sc_imlen == 0) { /* * Which target is reselecting us? (The ID bit really) */ sc->sc_selid = v; NCR_MISC(("selid=0x%2x ", sc->sc_selid)); return; } #endif sc->sc_imess[sc->sc_imlen] = v; /* * If we're going to reject the message, don't bother storing * the incoming bytes. But still, we need to ACK them. */ if ((sc->sc_flags & NCR_DROP_MSGI)) { NCRCMD(sc, NCRCMD_MSGOK); printf("", sc->sc_imess[sc->sc_imlen]); return; } if (sc->sc_imlen >= NCR_MAX_MSG_LEN) { ncr53c9x_sched_msgout(SEND_REJECT); sc->sc_flags |= NCR_DROP_MSGI; } else { sc->sc_imlen++; /* * This testing is suboptimal, but most * messages will be of the one byte variety, so * it should not effect performance * significantly. */ if (sc->sc_imlen == 1 && IS1BYTEMSG(sc->sc_imess[0])) goto gotit; if (sc->sc_imlen == 2 && IS2BYTEMSG(sc->sc_imess[0])) goto gotit; if (sc->sc_imlen >= 3 && ISEXTMSG(sc->sc_imess[0]) && sc->sc_imlen == sc->sc_imess[1] + 2) goto gotit; } /* Ack what we have so far */ NCRCMD(sc, NCRCMD_MSGOK); return; gotit: NCR_MSGS(("gotmsg(%x)", sc->sc_imess[0])); /* * Now we should have a complete message (1 byte, 2 byte * and moderately long extended messages). We only handle * extended messages which total length is shorter than * NCR_MAX_MSG_LEN. Longer messages will be amputated. */ switch (sc->sc_state) { struct ncr53c9x_ecb *ecb; struct ncr53c9x_tinfo *ti; case NCR_CONNECTED: ecb = sc->sc_nexus; ti = &sc->sc_tinfo[ecb->xs->sc_link->target]; switch (sc->sc_imess[0]) { case MSG_CMDCOMPLETE: NCR_MSGS(("cmdcomplete ")); if (sc->sc_dleft < 0) { struct scsi_link *sc_link = ecb->xs->sc_link; printf("%s: %ld extra bytes from %d:%d\n", sc->sc_dev.dv_xname, -(long)sc->sc_dleft, sc_link->target, sc_link->lun); sc->sc_dleft = 0; } ecb->xs->resid = ecb->dleft = sc->sc_dleft; sc->sc_state = NCR_CMDCOMPLETE; break; case MSG_MESSAGE_REJECT: if (ncr53c9x_debug & NCR_SHOWMSGS) printf("%s: our msg rejected by target\n", sc->sc_dev.dv_xname); switch (sc->sc_msgout) { case SEND_SDTR: sc->sc_flags &= ~NCR_SYNCHNEGO; ti->flags &= ~(T_NEGOTIATE | T_SYNCMODE); ncr53c9x_setsync(sc, ti); break; case SEND_INIT_DET_ERR: goto abort; } break; case MSG_NOOP: NCR_MSGS(("noop ")); break; case MSG_DISCONNECT: NCR_MSGS(("disconnect ")); ti->dconns++; sc->sc_state = NCR_DISCONNECT; if ((ecb->xs->sc_link->quirks & SDEV_AUTOSAVE) == 0) break; /*FALLTHROUGH*/ case MSG_SAVEDATAPOINTER: NCR_MSGS(("save datapointer ")); ecb->daddr = sc->sc_dp; ecb->dleft = sc->sc_dleft; break; case MSG_RESTOREPOINTERS: NCR_MSGS(("restore datapointer ")); sc->sc_dp = ecb->daddr; sc->sc_dleft = ecb->dleft; break; case MSG_EXTENDED: NCR_MSGS(("extended(%x) ", sc->sc_imess[2])); switch (sc->sc_imess[2]) { case MSG_EXT_SDTR: NCR_MSGS(("SDTR period %d, offset %d ", sc->sc_imess[3], sc->sc_imess[4])); if (sc->sc_imess[1] != 3) goto reject; ti->period = sc->sc_imess[3]; ti->offset = sc->sc_imess[4]; ti->flags &= ~T_NEGOTIATE; if (sc->sc_minsync == 0 || ti->offset == 0 || ti->period > 124) { printf("%s:%d: async\n", "esp", ecb->xs->sc_link->target); if ((sc->sc_flags&NCR_SYNCHNEGO) == 0) { /* * target initiated negotiation */ ti->offset = 0; ti->flags &= ~T_SYNCMODE; ncr53c9x_sched_msgout( SEND_SDTR); } else { /* we are async */ ti->flags &= ~T_SYNCMODE; } } else { int r = 250/ti->period; int s = (100*250)/ti->period - 100*r; int p; p = ncr53c9x_stp2cpb(sc, ti->period); ti->period = ncr53c9x_cpb2stp(sc, p); #ifdef NCR53C9X_DEBUG sc_print_addr(ecb->xs->sc_link); printf("max sync rate %d.%02dMb/s\n", r, s); #endif if ((sc->sc_flags&NCR_SYNCHNEGO) == 0) { /* * target initiated negotiation */ if (ti->period < sc->sc_minsync) ti->period = sc->sc_minsync; if (ti->offset > 15) ti->offset = 15; ti->flags &= ~T_SYNCMODE; ncr53c9x_sched_msgout( SEND_SDTR); } else { /* we are sync */ ti->flags |= T_SYNCMODE; } } sc->sc_flags &= ~NCR_SYNCHNEGO; ncr53c9x_setsync(sc, ti); break; default: printf("%s: unrecognized MESSAGE EXTENDED;" " sending REJECT\n", sc->sc_dev.dv_xname); goto reject; } break; default: NCR_MSGS(("ident ")); printf("%s: unrecognized MESSAGE; sending REJECT\n", sc->sc_dev.dv_xname); reject: ncr53c9x_sched_msgout(SEND_REJECT); break; } break; case NCR_RESELECTED: if (!MSG_ISIDENTIFY(sc->sc_imess[0])) { printf("%s: reselect without IDENTIFY;" " sending DEVICE RESET\n", sc->sc_dev.dv_xname); goto reset; } (void) ncr53c9x_reselect(sc, sc->sc_imess[0]); break; default: printf("%s: unexpected MESSAGE IN; sending DEVICE RESET\n", sc->sc_dev.dv_xname); reset: ncr53c9x_sched_msgout(SEND_DEV_RESET); break; abort: ncr53c9x_sched_msgout(SEND_ABORT); break; } /* Ack last message byte */ NCRCMD(sc, NCRCMD_MSGOK); /* Done, reset message pointer. */ sc->sc_flags &= ~NCR_DROP_MSGI; sc->sc_imlen = 0; } /* * Send the highest priority, scheduled message */ void ncr53c9x_msgout(sc) register struct ncr53c9x_softc *sc; { struct ncr53c9x_tinfo *ti; struct ncr53c9x_ecb *ecb; size_t size; NCR_TRACE(("[ncr53c9x_msgout(priq:%x, prevphase:%x)]", sc->sc_msgpriq, sc->sc_prevphase)); if (sc->sc_flags & NCR_ATN) { if (sc->sc_prevphase != MESSAGE_OUT_PHASE) { new: NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); sc->sc_msgoutq = 0; sc->sc_omlen = 0; } } else { if (sc->sc_prevphase == MESSAGE_OUT_PHASE) { ncr53c9x_sched_msgout(sc->sc_msgoutq); goto new; } else { printf("%s at line %d: unexpected MESSAGE OUT phase\n", sc->sc_dev.dv_xname, __LINE__); } } if (sc->sc_omlen == 0) { /* Pick up highest priority message */ sc->sc_msgout = sc->sc_msgpriq & -sc->sc_msgpriq; sc->sc_msgoutq |= sc->sc_msgout; sc->sc_msgpriq &= ~sc->sc_msgout; sc->sc_omlen = 1; /* "Default" message len */ switch (sc->sc_msgout) { case SEND_SDTR: ecb = sc->sc_nexus; ti = &sc->sc_tinfo[ecb->xs->sc_link->target]; sc->sc_omess[0] = MSG_EXTENDED; sc->sc_omess[1] = 3; sc->sc_omess[2] = MSG_EXT_SDTR; sc->sc_omess[3] = ti->period; sc->sc_omess[4] = ti->offset; sc->sc_omlen = 5; if ((sc->sc_flags & NCR_SYNCHNEGO) == 0) { ti->flags |= T_SYNCMODE; ncr53c9x_setsync(sc, ti); } break; case SEND_IDENTIFY: if (sc->sc_state != NCR_CONNECTED) { printf("%s at line %d: no nexus\n", sc->sc_dev.dv_xname, __LINE__); } ecb = sc->sc_nexus; sc->sc_omess[0] = MSG_IDENTIFY(ecb->xs->sc_link->lun, 0); break; case SEND_DEV_RESET: sc->sc_flags |= NCR_ABORTING; sc->sc_omess[0] = MSG_BUS_DEV_RESET; ecb = sc->sc_nexus; ti = &sc->sc_tinfo[ecb->xs->sc_link->target]; ti->flags &= ~T_SYNCMODE; ti->flags |= T_NEGOTIATE; break; case SEND_PARITY_ERROR: sc->sc_omess[0] = MSG_PARITY_ERROR; break; case SEND_ABORT: sc->sc_flags |= NCR_ABORTING; sc->sc_omess[0] = MSG_ABORT; break; case SEND_INIT_DET_ERR: sc->sc_omess[0] = MSG_INITIATOR_DET_ERR; break; case SEND_REJECT: sc->sc_omess[0] = MSG_MESSAGE_REJECT; break; default: NCRCMD(sc, NCRCMD_RSTATN); sc->sc_flags &= ~NCR_ATN; sc->sc_omess[0] = MSG_NOOP; break; } sc->sc_omp = sc->sc_omess; } #if 1 /* (re)send the message */ size = min(sc->sc_omlen, sc->sc_maxxfer); NCRDMA_SETUP(sc, &sc->sc_omp, &sc->sc_omlen, 0, &size); /* Program the SCSI counter */ NCR_WRITE_REG(sc, NCR_TCL, size); NCR_WRITE_REG(sc, NCR_TCM, size >> 8); if (sc->sc_cfg2 & NCRCFG2_FE) { NCR_WRITE_REG(sc, NCR_TCH, size >> 16); } /* load the count in */ NCRCMD(sc, NCRCMD_NOP|NCRCMD_DMA); NCRCMD(sc, NCRCMD_TRANS|NCRCMD_DMA); NCRDMA_GO(sc); #else { int i; for (i = 0; i < sc->sc_omlen; i++) NCR_WRITE_REG(sc, FIFO, sc->sc_omess[i]); NCRCMD(sc, NCRCMD_TRANS); sc->sc_omlen = 0; } #endif } /* * This is the most critical part of the driver, and has to know * how to deal with *all* error conditions and phases from the SCSI * bus. If there are no errors and the DMA was active, then call the * DMA pseudo-interrupt handler. If this returns 1, then that was it * and we can return from here without further processing. * * Most of this needs verifying. */ int ncr53c9x_intr(sc) register struct ncr53c9x_softc *sc; { register struct ncr53c9x_ecb *ecb; register struct scsi_link *sc_link; struct ncr53c9x_tinfo *ti; int loop; size_t size; NCR_TRACE(("[ncr53c9x_intr]")); /* * I have made some (maybe seriously flawed) assumptions here, * but basic testing (uncomment the printf() below), show that * certainly something happens when this loop is here. * * The idea is that many of the SCSI operations take very little * time, and going away and getting interrupted is too high an * overhead to pay. For example, selecting, sending a message * and command and then doing some work can be done in one "pass". * * The DELAY is not variable because I do not understand that the * DELAY loop should be fixed-time regardless of CPU speed, but * I am *assuming* that the faster SCSI processors get things done * quicker (sending a command byte etc), and so there is no * need to be too slow. * * This is a heuristic. It is 2 when at 20Mhz, 2 at 25Mhz and 1 * at 40Mhz. This needs testing. */ for (loop = 0; 1;loop++, DELAY(50/sc->sc_freq)) { /* a feeling of deja-vu */ if (!NCRDMA_ISINTR(sc)) return (loop != 0); #if 0 if (loop) printf("*"); #endif /* and what do the registers say... */ ncr53c9x_readregs(sc); sc->sc_intrcnt.ev_count++; /* * At the moment, only a SCSI Bus Reset or Illegal * Command are classed as errors. A disconnect is a * valid condition, and we let the code check is the * "NCR_BUSFREE_OK" flag was set before declaring it * and error. * * Also, the status register tells us about "Gross * Errors" and "Parity errors". Only the Gross Error * is really bad, and the parity errors are dealt * with later * * TODO * If there are too many parity error, go to slow * cable mode ? */ /* SCSI Reset */ if (sc->sc_espintr & NCRINTR_SBR) { if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) { NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); } if (sc->sc_state != NCR_SBR) { printf("%s: SCSI bus reset\n", sc->sc_dev.dv_xname); ncr53c9x_init(sc, 0); /* Restart everything */ return 1; } #if 0 /*XXX*/ printf("\n", sc->sc_espintr, sc->sc_espstat, sc->sc_espstep); #endif if (sc->sc_nexus) panic("%s: nexus in reset state", sc->sc_dev.dv_xname); goto sched; } ecb = sc->sc_nexus; #define NCRINTR_ERR (NCRINTR_SBR|NCRINTR_ILL) if (sc->sc_espintr & NCRINTR_ERR || sc->sc_espstat & NCRSTAT_GE) { if (sc->sc_espstat & NCRSTAT_GE) { /* no target ? */ if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) { NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); } if (sc->sc_state == NCR_CONNECTED || sc->sc_state == NCR_SELECTING) { ecb->xs->error = XS_DRIVER_STUFFUP; ncr53c9x_done(sc, ecb); } return 1; } if (sc->sc_espintr & NCRINTR_ILL) { /* illegal command, out of sync ? */ printf("%s: illegal command: 0x%x " "(state %d, phase %x, prevphase %x)\n", sc->sc_dev.dv_xname, sc->sc_lastcmd, sc->sc_state, sc->sc_phase, sc->sc_prevphase); if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) { NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); } ncr53c9x_init(sc, 0); /* Restart everything */ return 1; } } /* * Call if DMA is active. * * If DMA_INTR returns true, then maybe go 'round the loop * again in case there is no more DMA queued, but a phase * change is expected. */ if (NCRDMA_ISACTIVE(sc)) { int r = NCRDMA_INTR(sc); if (r == -1) { printf("%s: DMA error; resetting\n", sc->sc_dev.dv_xname); ncr53c9x_init(sc, 1); } /* If DMA active here, then go back to work... */ if (NCRDMA_ISACTIVE(sc)) return 1; if (sc->sc_dleft == 0 && (sc->sc_espstat & NCRSTAT_TC) == 0) printf("%s: !TC [intr %x, stat %x, step %d]" " prevphase %x, resid %x\n", sc->sc_dev.dv_xname, sc->sc_espintr, sc->sc_espstat, sc->sc_espstep, sc->sc_prevphase, ecb?ecb->dleft:-1); } #if 0 /* Unreliable on some NCR revisions? */ if ((sc->sc_espstat & NCRSTAT_INT) == 0) { printf("%s: spurious interrupt\n", sc->sc_dev.dv_xname); return 1; } #endif /* * check for less serious errors */ if (sc->sc_espstat & NCRSTAT_PE) { printf("%s: SCSI bus parity error\n", sc->sc_dev.dv_xname); if (sc->sc_prevphase == MESSAGE_IN_PHASE) ncr53c9x_sched_msgout(SEND_PARITY_ERROR); else ncr53c9x_sched_msgout(SEND_INIT_DET_ERR); } if (sc->sc_espintr & NCRINTR_DIS) { NCR_MISC(("", sc->sc_espintr,sc->sc_espstat,sc->sc_espstep)); if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) { NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); } /* * This command must (apparently) be issued within * 250mS of a disconnect. So here you are... */ NCRCMD(sc, NCRCMD_ENSEL); switch (sc->sc_state) { case NCR_RESELECTED: goto sched; case NCR_SELECTING: ecb->xs->error = XS_SELTIMEOUT; goto finish; case NCR_CONNECTED: if ((sc->sc_flags & NCR_SYNCHNEGO)) { #ifdef NCR53C9X_DEBUG if (ecb) sc_print_addr(ecb->xs->sc_link); printf("sync nego not completed!\n"); #endif ti = &sc->sc_tinfo[ecb->xs->sc_link->target]; sc->sc_flags &= ~NCR_SYNCHNEGO; ti->flags &= ~(T_NEGOTIATE | T_SYNCMODE); } /* it may be OK to disconnect */ if ((sc->sc_flags & NCR_ABORTING) == 0) { /* * Section 5.1.1 of the SCSI 2 spec * suggests issuing a REQUEST SENSE * following an unexpected disconnect. * Some devices go into a contingent * allegiance condition when * disconnecting, and this is necessary * to clean up their state. */ printf("%s: unexpected disconnect; ", sc->sc_dev.dv_xname); if (ecb->flags & ECB_SENSE) { printf("resetting\n"); goto reset; } printf("sending REQUEST SENSE\n"); ncr53c9x_sense(sc, ecb); goto out; } ecb->xs->error = XS_DRIVER_STUFFUP; goto finish; case NCR_DISCONNECT: TAILQ_INSERT_HEAD(&sc->nexus_list, ecb, chain); sc->sc_nexus = NULL; goto sched; case NCR_CMDCOMPLETE: goto finish; } } switch (sc->sc_state) { case NCR_SBR: printf("%s: waiting for SCSI Bus Reset to happen\n", sc->sc_dev.dv_xname); return 1; case NCR_RESELECTED: /* * we must be continuing a message ? */ if (sc->sc_phase != MESSAGE_IN_PHASE) { printf("%s: target didn't identify\n", sc->sc_dev.dv_xname); ncr53c9x_init(sc, 1); return 1; } printf("<>"); #if XXXX ncr53c9x_msgin(sc); if (sc->sc_state != NCR_CONNECTED) { /* IDENTIFY fail?! */ printf("%s: identify failed\n", sc->sc_dev.dv_xname); ncr53c9x_init(sc, 1); return 1; } #endif break; case NCR_IDLE: if (sc->sc_flags & NCR_ICCS) printf("[[esp: BUMMER]]"); case NCR_SELECTING: sc->sc_msgpriq = sc->sc_msgout = sc->sc_msgoutq = 0; sc->sc_flags = 0; if (sc->sc_espintr & NCRINTR_RESEL) { /* * If we're trying to select a * target ourselves, push our command * back into the ready list. */ if (sc->sc_state == NCR_SELECTING) { NCR_MISC(("backoff selector ")); sc_link = sc->sc_nexus->xs->sc_link; ti = &sc->sc_tinfo[sc_link->target]; TAILQ_INSERT_HEAD(&sc->ready_list, sc->sc_nexus, chain); ecb = sc->sc_nexus = NULL; } sc->sc_state = NCR_RESELECTED; if (sc->sc_phase != MESSAGE_IN_PHASE) { /* * Things are seriously fucked up. * Pull the brakes, i.e. reset */ printf("%s: target didn't identify\n", sc->sc_dev.dv_xname); ncr53c9x_init(sc, 1); return 1; } if ((NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) != 2) { printf("%s: RESELECT: " "%d bytes in FIFO!\n", sc->sc_dev.dv_xname, NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF); ncr53c9x_init(sc, 1); return 1; } sc->sc_selid = NCR_READ_REG(sc, NCR_FIFO); NCR_MISC(("selid=0x%2x ", sc->sc_selid)); /* Handle identify message */ ncr53c9x_msgin(sc); if (sc->sc_state != NCR_CONNECTED) { /* IDENTIFY fail?! */ printf("%s: identify failed\n", sc->sc_dev.dv_xname); ncr53c9x_init(sc, 1); return 1; } continue; /* ie. next phase expected soon */ } #define NCRINTR_DONE (NCRINTR_FC|NCRINTR_BS) if ((sc->sc_espintr & NCRINTR_DONE) == NCRINTR_DONE) { ecb = sc->sc_nexus; if (!ecb) panic("esp: not nexus at sc->sc_nexus"); sc_link = ecb->xs->sc_link; ti = &sc->sc_tinfo[sc_link->target]; switch (sc->sc_espstep) { case 0: printf("%s: select timeout/no " "disconnect\n", sc->sc_dev.dv_xname); ecb->xs->error = XS_SELTIMEOUT; goto finish; case 1: if ((ti->flags & T_NEGOTIATE) == 0) { printf("%s: step 1 & !NEG\n", sc->sc_dev.dv_xname); goto reset; } if (sc->sc_phase != MESSAGE_OUT_PHASE) { printf("%s: !MSGOUT\n", sc->sc_dev.dv_xname); goto reset; } /* Start negotiating */ ti->period = sc->sc_minsync; ti->offset = 15; sc->sc_flags |= NCR_SYNCHNEGO; ncr53c9x_sched_msgout(SEND_SDTR); break; case 3: /* * Grr, this is supposed to mean * "target left command phase * prematurely". It seems to happen * regularly when sync mode is on. * Look at FIFO to see if command * went out. * (Timing problems?) */ if ((NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) == 0) { /* Hope for the best.. */ break; } printf("(%s:%d:%d): selection failed;" " %d left in FIFO " "[intr %x, stat %x, step %d]\n", sc->sc_dev.dv_xname, sc_link->target, sc_link->lun, NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF, sc->sc_espintr, sc->sc_espstat, sc->sc_espstep); NCRCMD(sc, NCRCMD_FLUSH); ncr53c9x_sched_msgout(SEND_ABORT); return 1; case 2: /* Select stuck at Command Phase */ NCRCMD(sc, NCRCMD_FLUSH); case 4: /* So far, everything went fine */ break; } #if 0 if (ecb->xs->flags & SCSI_RESET) ncr53c9x_sched_msgout(SEND_DEV_RESET); else if (ti->flags & T_NEGOTIATE) ncr53c9x_sched_msgout( SEND_IDENTIFY | SEND_SDTR); else ncr53c9x_sched_msgout(SEND_IDENTIFY); #endif ecb->flags |= ECB_NEXUS; ti->lubusy |= (1 << sc_link->lun); sc->sc_prevphase = INVALID_PHASE; /* ?? */ /* Do an implicit RESTORE POINTERS. */ sc->sc_dp = ecb->daddr; sc->sc_dleft = ecb->dleft; /* On our first connection, schedule a timeout. */ if ((ecb->xs->flags & SCSI_POLL) == 0) timeout(ncr53c9x_timeout, ecb, (ecb->timeout * hz) / 1000); sc->sc_state = NCR_CONNECTED; break; } else { printf("%s: unexpected status after select" ": [intr %x, stat %x, step %x]\n", sc->sc_dev.dv_xname, sc->sc_espintr, sc->sc_espstat, sc->sc_espstep); NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); goto reset; } if (sc->sc_state == NCR_IDLE) { printf("%s: stray interrupt\n", sc->sc_dev.dv_xname); return 0; } break; case NCR_CONNECTED: if (sc->sc_flags & NCR_ICCS) { u_char msg; sc->sc_flags &= ~NCR_ICCS; if (!(sc->sc_espintr & NCRINTR_DONE)) { printf("%s: ICCS: " ": [intr %x, stat %x, step %x]\n", sc->sc_dev.dv_xname, sc->sc_espintr, sc->sc_espstat, sc->sc_espstep); } if ((NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) != 2) { int i = (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) - 2; while (i--) (void) NCR_READ_REG(sc, NCR_FIFO); } ecb->stat = NCR_READ_REG(sc, NCR_FIFO); msg = NCR_READ_REG(sc, NCR_FIFO); NCR_PHASE(("", ecb->stat, msg)); if (msg == MSG_CMDCOMPLETE) { ecb->xs->resid = ecb->dleft = sc->sc_dleft; sc->sc_state = NCR_CMDCOMPLETE; } else printf("%s: STATUS_PHASE: msg %d\n", sc->sc_dev.dv_xname, msg); NCRCMD(sc, NCRCMD_MSGOK); continue; /* ie. wait for disconnect */ } break; default: panic("%s: invalid state: %d", sc->sc_dev.dv_xname, sc->sc_state); } /* * Driver is now in state NCR_CONNECTED, i.e. we * have a current command working the SCSI bus. */ if (sc->sc_state != NCR_CONNECTED || ecb == NULL) { panic("esp no nexus"); } switch (sc->sc_phase) { case MESSAGE_OUT_PHASE: NCR_PHASE(("MESSAGE_OUT_PHASE ")); ncr53c9x_msgout(sc); sc->sc_prevphase = MESSAGE_OUT_PHASE; break; case MESSAGE_IN_PHASE: NCR_PHASE(("MESSAGE_IN_PHASE ")); if (sc->sc_espintr & NCRINTR_BS) { NCRCMD(sc, NCRCMD_FLUSH); sc->sc_flags |= NCR_WAITI; NCRCMD(sc, NCRCMD_TRANS); } else if (sc->sc_espintr & NCRINTR_FC) { if ((sc->sc_flags & NCR_WAITI) == 0) { printf("%s: MSGIN: unexpected FC bit: " "[intr %x, stat %x, step %x]\n", sc->sc_dev.dv_xname, sc->sc_espintr, sc->sc_espstat, sc->sc_espstep); } sc->sc_flags &= ~NCR_WAITI; ncr53c9x_msgin(sc); } else { printf("%s: MSGIN: weird bits: " "[intr %x, stat %x, step %x]\n", sc->sc_dev.dv_xname, sc->sc_espintr, sc->sc_espstat, sc->sc_espstep); } sc->sc_prevphase = MESSAGE_IN_PHASE; break; case COMMAND_PHASE: { /* well, this means send the command again */ u_char *cmd = (u_char *)&ecb->cmd; int i; NCR_PHASE(("COMMAND_PHASE 0x%02x (%d) ", ecb->cmd.opcode, ecb->clen)); if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) { NCRCMD(sc, NCRCMD_FLUSH); DELAY(1); } /* Now the command into the FIFO */ for (i = 0; i < ecb->clen; i++) NCR_WRITE_REG(sc, NCR_FIFO, *cmd++); NCRCMD(sc, NCRCMD_TRANS); sc->sc_prevphase = COMMAND_PHASE; } break; case DATA_OUT_PHASE: NCR_PHASE(("DATA_OUT_PHASE [%ld] ",(long)sc->sc_dleft)); NCRCMD(sc, NCRCMD_FLUSH); size = min(sc->sc_dleft, sc->sc_maxxfer); NCRDMA_SETUP(sc, &sc->sc_dp, &sc->sc_dleft, 0, &size); sc->sc_prevphase = DATA_OUT_PHASE; goto setup_xfer; case DATA_IN_PHASE: NCR_PHASE(("DATA_IN_PHASE ")); if (sc->sc_rev == NCR_VARIANT_ESP100) NCRCMD(sc, NCRCMD_FLUSH); size = min(sc->sc_dleft, sc->sc_maxxfer); NCRDMA_SETUP(sc, &sc->sc_dp, &sc->sc_dleft, 1, &size); sc->sc_prevphase = DATA_IN_PHASE; setup_xfer: /* Program the SCSI counter */ NCR_WRITE_REG(sc, NCR_TCL, size); NCR_WRITE_REG(sc, NCR_TCM, size >> 8); if (sc->sc_cfg2 & NCRCFG2_FE) { NCR_WRITE_REG(sc, NCR_TCH, size >> 16); } /* load the count in */ NCRCMD(sc, NCRCMD_NOP|NCRCMD_DMA); /* * Note that if `size' is 0, we've already transceived * all the bytes we want but we're still in DATA PHASE. * Apparently, the device needs padding. Also, a * transfer size of 0 means "maximum" to the chip * DMA logic. */ NCRCMD(sc, (size==0?NCRCMD_TRPAD:NCRCMD_TRANS)|NCRCMD_DMA); NCRDMA_GO(sc); return 1; case STATUS_PHASE: NCR_PHASE(("STATUS_PHASE ")); sc->sc_flags |= NCR_ICCS; NCRCMD(sc, NCRCMD_ICCS); sc->sc_prevphase = STATUS_PHASE; break; case INVALID_PHASE: break; default: printf("%s: unexpected bus phase; resetting\n", sc->sc_dev.dv_xname); goto reset; } } panic("esp: should not get here.."); reset: ncr53c9x_init(sc, 1); return 1; finish: untimeout(ncr53c9x_timeout, ecb); ncr53c9x_done(sc, ecb); goto out; sched: sc->sc_state = NCR_IDLE; ncr53c9x_sched(sc); goto out; out: return 1; } void ncr53c9x_abort(sc, ecb) struct ncr53c9x_softc *sc; struct ncr53c9x_ecb *ecb; { /* 2 secs for the abort */ ecb->timeout = NCR_ABORT_TIMEOUT; ecb->flags |= ECB_ABORT; if (ecb == sc->sc_nexus) { /* * If we're still selecting, the message will be scheduled * after selection is complete. */ if (sc->sc_state == NCR_CONNECTED) ncr53c9x_sched_msgout(SEND_ABORT); /* * Reschedule timeout. First, cancel a queued timeout (if any) * in case someone decides to call ncr53c9x_abort() from * elsewhere. */ untimeout(ncr53c9x_timeout, ecb); timeout(ncr53c9x_timeout, ecb, (ecb->timeout * hz) / 1000); } else { ncr53c9x_dequeue(sc, ecb); TAILQ_INSERT_HEAD(&sc->ready_list, ecb, chain); if (sc->sc_state == NCR_IDLE) ncr53c9x_sched(sc); } } void ncr53c9x_timeout(arg) void *arg; { struct ncr53c9x_ecb *ecb = arg; struct scsi_xfer *xs = ecb->xs; struct scsi_link *sc_link = xs->sc_link; struct ncr53c9x_softc *sc = sc_link->adapter_softc; int s; sc_print_addr(sc_link); printf("%s: timed out [ecb %p (flags 0x%x, dleft %x, stat %x)], " "", sc->sc_dev.dv_xname, ecb, ecb->flags, ecb->dleft, ecb->stat, sc->sc_state, sc->sc_nexus, sc->sc_phase, sc->sc_prevphase, (long)sc->sc_dleft, sc->sc_msgpriq, sc->sc_msgout, NCRDMA_ISACTIVE(sc) ? "DMA active" : ""); #if NCR53C9X_DEBUG > 0 printf("TRACE: %s.", ecb->trace); #endif s = splbio(); if (ecb->flags & ECB_ABORT) { /* abort timed out */ printf(" AGAIN\n"); ncr53c9x_init(sc, 1); } else { /* abort the operation that has timed out */ printf("\n"); xs->error = XS_TIMEOUT; ncr53c9x_abort(sc, ecb); } splx(s); }