/* $OpenBSD: silireg.h,v 1.20 2007/04/07 13:02:52 pascoe Exp $ */ /* * Copyright (c) 2007 David Gwynne <dlg@openbsd.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* PCI Registers */ #define SILI_PCI_BAR_GLOBAL 0x10 /* Global Registers address */ #define SILI_PCI_BAR_PORT 0x18 /* Port Registers address */ #define SILI_PCI_BAR_INDIRECT 0x20 /* Indirect IO Registers address */ /* Global Registers */ #define SILI_REG_PORT0_STATUS 0x00 /* Port 0 Slot Status */ #define SILI_REG_PORT1_STATUS 0x04 /* Port 1 Slot Status */ #define SILI_REG_PORT2_STATUS 0x08 /* Port 2 Slot Status */ #define SILI_REG_PORT3_STATUS 0x0c /* Port 3 Slot Status */ #define SILI_REG_GC 0x40 /* Global Control */ #define SILI_REG_GC_GR (1<<31) /* Global Reset */ #define SILI_REG_GC_MSIACK (1<<30) /* MSI Acknowledge */ #define SILI_REG_GC_I2CINT (1<<29) /* I2C Interrupt Enable */ #define SILI_REG_GC_PERRDIS (1<<28) /* PCI Error Report Disable */ #define SILI_REG_GC_REQ64 (1<<20) /* latched PCI REQ64 */ #define SILI_REG_GC_DEVSEL (1<<19) /* latched PCI DEVSEL */ #define SILI_REG_GC_STOP (1<<18) /* latched PCI STOP */ #define SILI_REG_GC_TRDY (1<<17) /* latched PCI TRDY */ #define SILI_REG_GC_M66EN (1<<16) /* M66EN PCI bus signal */ #define SILI_REG_GC_PIE_MASK 0x0f #define SILI_FMT_GC "\020" "\040GR" "\037MSIACK" "\036I2CINT" \ "\035PERRDIS" "\025REQ64" "\024DEVSEL" \ "\023STOP" "\022TRDY" "\021M66EN" \ "\004P3IE" "\003P2IE" "\002P1IE" "\001P0IE" #define SILI_REG_GIS 0x44 /* Global Interrupt Status */ #define SILI_REG_GIS_I2C (1 << 29) #define SILI_REG_GIS_PIS_MASK 0x0f #define SILI_REG_PHYCONF 0x48 /* PHY Configuration */ #define SILI_REG_BISTCTL 0x50 /* BIST Control */ #define SILI_REG_BISTPATTERN 0x54 /* BIST Pattern */ #define SILI_REG_BISTSTAT 0x58 /* BIST Status */ #define SILI_REG_FLASHADDR 0x70 /* Flash Address */ #define SILI_REG_FLASHDATA 0x74 /* Flash Memory Data / GPIO Control */ #define SILI_REG_GPIOCTL SILI_REG_FLASHDATA #define SILI_REG_IICADDR 0x78 /* I2C Address */ #define SILI_REG_IIC 0x7c /* I2C Data / Control */ #define SILI_PORT_SIZE 0x2000 #define SILI_PORT_OFFSET(_p) ((_p) * SILI_PORT_SIZE) /* Port Registers */ #define SILI_PREG_LRAM 0x0000 /* Port LRAM */ #define SILI_PREG_SLOT_WIDTH 0x80 #define SILI_PREG_SLOT(_s) (SILI_PREG_LRAM + (_s) * SILI_PREG_SLOT_WIDTH) #define SILI_PREG_RX_COUNT(_s) (SILI_PREG_SLOT(_s) + 0x04) #define SILI_PREG_SIG_HI(_s) (SILI_PREG_SLOT(_s) + 0x0c) #define SILI_PREG_SIG_HI_SHIFT 8 #define SILI_PREG_SIG_LO(_s) (SILI_PREG_SLOT(_s) + 0x14) #define SILI_PREG_SIG_LO_MASK 0xff /* XXX PMP Bits */ #define SILI_PREG_PCS 0x1000 /* Port Control Set / Status */ #define SILI_PREG_PCS_PORTRDY (1<<31) /* Port Ready */ #define SILI_PREG_PCS_OOBB (1<<25) /* OOB Bypass */ #define SILI_PREG_PCS_ACTIVE(_x) (((_x)>>16) & 0x1f) /* Active Slot */ #define SILI_PREG_PCS_LED_ON (1<<15) /* LED On */ #define SILI_PREG_PCS_AIA (1<<14) /* Auto Interlock Accept */ #define SILI_PREG_PCS_PMEN (1<<13) /* Port Mult Enable */ #define SILI_PREG_PCS_IA (1<<12) /* Interlock Accept */ #define SILI_PREG_PCS_IR (1<<11) /* Interlock Reject */ #define SILI_PREG_PCS_A32B (1<<10) /* 32-bit Activation */ #define SILI_PREG_PCS_SD (1<<9) /* Scrambler Disable */ #define SILI_PREG_PCS_CD (1<<8) /* CONT Disable */ #define SILI_PREG_PCS_TB (1<<7) /* Transmit BIST */ #define SILI_PREG_PCS_RESUME (1<<6) /* Resume */ #define SILI_PREG_PCS_PLEN (1<<5) /* Packet Length */ #define SILI_PREG_PCS_LEDDISABLE (1<<4) /* LED Disable */ #define SILI_PREG_PCS_NOINTCLR (1<<3) /* No Intr Clear on Read */ #define SILI_PREG_PCS_PORTINIT (1<<2) /* Port Initialize */ #define SILI_PREG_PCS_DEVRESET (1<<1) /* Device Reset */ #define SILI_PREG_PCS_PORTRESET (1<<0) /* Port Reset */ #define SILI_PFMT_PCS "\020" "\032OOBB" "\020LED_ON" "\017AIA" \ "\016PMEN" "\015IA" "\014IR" "\013A32B" \ "\012SD" "\011CD" "\010TB" "\007RESUME" \ "\006PLEN" "\005LEDDISABLE" \ "\004NOINTCLR" "\003PORTINIT" \ "\002PORTINIT" "\001PORTRESET" #define SILI_PREG_PCC 0x1004 /* Port Control Clear */ #define SILI_PREG_PCC_OOBB (1<<25) /* OOB Bypass */ #define SILI_PREG_PCC_LED_ON (1<<15) /* LED On */ #define SILI_PREG_PCC_AIA (1<<14) /* Auto Interlock Accept */ #define SILI_PREG_PCC_PMEN (1<<13) /* Port Mult Enable */ #define SILI_PREG_PCC_IA (1<<12) /* Interlock Accept */ #define SILI_PREG_PCC_IR (1<<11) /* Interlock Reject */ #define SILI_PREG_PCC_A32B (1<<10) /* 32-bit Activation */ #define SILI_PREG_PCC_SD (1<<9) /* Scrambler Disable */ #define SILI_PREG_PCC_CD (1<<8) /* CONT Disable */ #define SILI_PREG_PCC_TB (1<<7) /* Transmit BIST */ #define SILI_PREG_PCC_RESUME (1<<6) /* Resume */ #define SILI_PREG_PCC_PLEN (1<<5) /* Packet Length */ #define SILI_PREG_PCC_LEDDISABLE (1<<4) /* LED Disable */ #define SILI_PREG_PCC_NOINTCLR (1<<3) /* No Intr Clear on Read */ #define SILI_PREG_PCC_PORTINIT (1<<2) /* Port Initialize */ #define SILI_PREG_PCC_DEVRESET (1<<1) /* Device Reset */ #define SILI_PREG_PCC_PORTRESET (1<<0) /* Port Reset */ #define SILI_PREG_IS 0x1008 /* Interrupt Status */ #define SILI_PREG_IS_SDB (1<<11) /* SDB Notify */ #define SILI_PREG_IS_HANDSHAKE (1<<10) /* Handshake error threshold */ #define SILI_PREG_IS_CRC (1<<9) /* CRC error threshold */ #define SILI_PREG_IS_DEC (1<<8) /* 8b/10b decode error thresh */ #define SILI_PREG_IS_DEVXCHG (1<<7) /* Device Exchanged */ #define SILI_PREG_IS_UNRECFIS (1<<6) /* Unrecognized FIS Type */ #define SILI_PREG_IS_COMWAKE (1<<5) /* ComWake */ #define SILI_PREG_IS_PHYRDYCHG (1<<4) /* Phy Ready Change */ #define SILI_PREG_IS_PMCHG (1<<3) /* Power Mmgt Change */ #define SILI_PREG_IS_PORTRDY (1<<2) /* Port Ready */ #define SILI_PREG_IS_CMDERR (1<<1) /* Command Error */ #define SILI_PREG_IS_CMDCOMP (1<<0) /* Command Completion */ #define SILI_PFMT_IS "\020" "\014SDB" "\013HANDSHAKE" \ "\012CRC" "\011DECODE" \ "\010DEVXCHG" "\007UNRECFIS" \ "\006COMWAKE" "\005PHYRDYCHG" \ "\004PMCHG" "\003PORTRDY" \ "\002CMDERR" "\001CMDCOMP" #define SILI_PREG_IES 0x1010 /* Interrupt Enable Set */ #define SILI_PREG_IEC 0x1014 /* Interrupt Enable Clear */ #define SILI_PREG_IE_SDB (1<<11) /* SDB Notify */ #define SILI_PREG_IE_DEVXCHG (1<<7) /* Device Exchange */ #define SILI_PREG_IE_UNRECFIS (1<<6) /* Unrecognized FIS Type */ #define SILI_PREG_IE_COMWAKE (1<<5) /* ComWake */ #define SILI_PREG_IE_PHYRDYCHG (1<<4) /* Phy Ready Change */ #define SILI_PREG_IE_PMCHG (1<<3) /* Power Mmgt Change */ #define SILI_PREG_IE_PORTRDY (1<<2) /* Port Ready */ #define SILI_PREG_IE_CMDERR (1<<1) /* Command Error */ #define SILI_PREG_IE_CMDCOMP (1<<0) /* Command Completion */ #define SILI_PREG_IE_ALL 0x08ff #define SILI_PREG_AUA 0x101c /* Activation Upper Address */ #define SILI_PREG_FIFO 0x1020 /* Command Execution FIFO */ #define SILI_PREG_CE 0x1024 /* Command Error */ #define SILI_PREG_CE_DEVICEERROR 1 #define SILI_PREG_CE_SDBERROR 2 #define SILI_PREG_CE_DATAFISERROR 3 #define SILI_PREG_FC 0x1028 /* FIS Configuration */ #define SILI_PREG_RFT 0x102c /* Request FIFO Threshold */ #define SILI_PREG_DEC 0x1040 /* 8b/10b Decode Error Counter */ #define SILI_PREG_CEC 0x1044 /* CRC Error Counter */ #define SILI_PREG_HEC 0x1048 /* Handshake Error Counter */ #define SILI_PREG_PHYCONF 0x1050 /* Port PHY Configuration */ #define SILI_PREG_PSS 0x1800 /* Port Slot Status */ #define SILI_PREG_PSS_ATTENTION (1 << 31) #define SILI_PREG_PSS_ALL_SLOTS 0x7fffffff #define SILI_PREG_CAR_LO(_s) (0x1c00 + ((_s) * 0x8)) /* Cmd Activate Reg */ #define SILI_PREG_CAR_HI(_s) (0x1c00 + ((_s) * 0x8) + 0x4) #define SILI_PREG_CONTEXT 0x1e0f /* Port Context Register */ #define SILI_PREG_SCTL 0x1f00 /* SControl */ #define SILI_PREG_SSTS 0x1f04 /* SStatus */ #define SILI_PREG_SERR 0x1f08 /* SError */ #define SILI_PREG_SACT 0x1f0c /* SActive */ struct sili_sge { u_int32_t addr_lo; u_int32_t addr_hi; u_int32_t data_count; u_int32_t flags; #define SILI_SGE_TRM (1<<31) #define SILI_SGE_LNK (1<<30) #define SILI_SGE_DRD (1<<29) #define SILI_SGE_XCF (1<<28) } __packed; #define SILI_SGT_SGLLEN 4 struct sili_sgt { struct sili_sge sgl[SILI_SGT_SGLLEN]; } __packed; #define SILI_PRB_PROTOCOL_OVERRIDE (1<<0) #define SILI_PRB_RETRANSMIT (1<<1) #define SILI_PRB_EXTERNAL_COMMAND (1<<2) #define SILI_PRB_RECEIVE (1<<3) #define SILI_PRB_PACKET_READ (1<<4) #define SILI_PRB_PACKET_WRITE (1<<5) #define SILI_PRB_INTERRUPT_MASK (1<<6) #define SILI_PRB_SOFT_RESET (1<<7) struct sili_prb { /* this is just a useful template */ u_int16_t control; u_int16_t reserved1; u_int32_t reserved2; u_int8_t fis[ATA_FIS_LENGTH]; u_int32_t reserved3[9]; } __packed; struct sili_prb_ata { u_int16_t control; u_int16_t protocol_override; u_int32_t rx_count; u_int8_t fis[ATA_FIS_LENGTH]; u_int32_t reserved; struct sili_sge sgl[2]; } __packed; struct sili_prb_packet { u_int16_t control; u_int16_t protocol_override; u_int32_t rx_count; u_int8_t fis[ATA_FIS_LENGTH]; u_int32_t reserved; u_int8_t cdb[16]; struct sili_sge sgl[1]; } __packed; struct sili_prb_softreset { u_int16_t control; u_int16_t reserved1; u_int32_t reserved2; u_int8_t fis[ATA_FIS_LENGTH]; u_int32_t reserved3[9]; } __packed; #define SILI_MAX_CMDS 31 #define SILI_PRB_LENGTH 64 #define SILI_PRB_ALIGN 8 #define SILI_SGT_LENGTH 64