/* $OpenBSD: siopvar_common.h,v 1.19 2004/06/12 22:22:26 krw Exp $ */ /* $NetBSD: siopvar_common.h,v 1.22 2002/10/23 02:32:36 christos Exp $ */ /* * Copyright (c) 2000 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* common struct and routines used by siop and esiop */ #ifndef SIOP_DEFAULT_TARGET #define SIOP_DEFAULT_TARGET 7 #endif /* tables used by SCRIPT */ typedef struct scr_table { u_int32_t count; u_int32_t addr; } scr_table_t __packed; /* Number of scatter/gather entries */ /* XXX Ensure alignment of siop_xfer's. */ #define SIOP_NSG 17 /* XXX (MAXPHYS/NBPG + 1) */ #define SIOP_MAXFER ((SIOP_NSG - 1) * PAGE_SIZE) /* * This structure interfaces the SCRIPT with the driver; it describes a full * transfer. If you change something here, don't forget to update offsets in * {s,es}iop.ss */ struct siop_common_xfer { u_int8_t msg_out[16]; /* 0 */ u_int8_t msg_in[16]; /* 16 */ u_int32_t status; /* 32 */ u_int32_t pad1; /* 36 */ u_int32_t id; /* 40 */ struct scsi_generic xscmd; /* 44 */ scr_table_t t_msgin; /* 56 */ scr_table_t t_extmsgin; /* 64 */ scr_table_t t_extmsgdata; /* 72 */ scr_table_t t_msgout; /* 80 */ scr_table_t cmd; /* 88 */ scr_table_t t_status; /* 96 */ scr_table_t data[SIOP_NSG]; /* 104 */ } __packed; /* status can hold the SCSI_* status values, and 2 additional values: */ #define SCSI_SIOP_NOCHECK 0xfe /* don't check the scsi status */ #define SCSI_SIOP_NOSTATUS 0xff /* device didn't report status */ /* * This describes a command handled by the SCSI controller */ struct siop_common_cmd { struct siop_common_softc *siop_sc; /* points back to our adapter */ struct siop_common_target *siop_target; /* pointer to our target def */ struct scsi_xfer *xs; /* xfer from the upper level */ struct siop_common_xfer *siop_tables; /* tables for this cmd */ bus_addr_t dsa; /* DSA value to load */ bus_dmamap_t dmamap_data; int status; int flags; int tag; /* tag used for tagged command queuing */ }; /* status defs */ #define CMDST_FREE 0 /* cmd slot is free */ #define CMDST_READY 1 /* cmd slot is waiting for processing */ #define CMDST_ACTIVE 2 /* cmd slot is being processed */ #define CMDST_SENSE 3 /* cmd slot is requesting sense */ #define CMDST_SENSE_ACTIVE 4 /* request sense active */ #define CMDST_SENSE_DONE 5 /* request sense done */ #define CMDST_DONE 6 /* cmd slot has been processed */ /* flags defs */ #define CMDFL_TIMEOUT 0x0001 /* cmd timed out */ #define CMDFL_TAG 0x0002 /* tagged cmd */ /* per-target struct */ struct siop_common_target { int status; /* target status, see below */ int flags; /* target flags, see below */ u_int32_t id; /* for SELECT FROM */ int period; int offset; }; /* target status */ #define TARST_PROBING 0 /* target is being probed */ #define TARST_ASYNC 1 /* target needs sync/wide negotiation */ #define TARST_WIDE_NEG 2 /* target is doing wide negotiation */ #define TARST_SYNC_NEG 3 /* target is doing sync negotiation */ #define TARST_PPR_NEG 4 /* target is doing sync negotiation */ #define TARST_OK 5 /* sync/wide agreement is valid */ /* target flags */ #define TARF_SYNC 0x01 /* target can do sync */ #define TARF_WIDE 0x02 /* target can do wide */ #define TARF_TAG 0x04 /* target can do tags */ #define TARF_DT 0x08 /* target can do DT clocking */ #define TARF_ISWIDE 0x10 /* target is wide */ #define TARF_ISDT 0x20 /* target is doing DT clocking */ /* Driver internal state */ struct siop_common_softc { struct device sc_dev; struct scsi_link sc_link; /* link to upper level */ int features; /* chip's features */ int ram_size; int maxburst; int maxoff; int clock_div; /* async. clock divider (scntl3) */ int clock_period; /* clock period (ns * 10) */ int st_minsync; /* min and max sync period, */ int dt_minsync; int st_maxsync; /* as sent in or PPR messages */ int dt_maxsync; int mode; /* current SE/LVD/HVD mode */ bus_space_tag_t sc_rt; /* bus_space registers tag */ bus_space_handle_t sc_rh; /* bus_space registers handle */ bus_addr_t sc_raddr; /* register addresses */ bus_space_tag_t sc_ramt; /* bus_space ram tag */ bus_space_handle_t sc_ramh; /* bus_space ram handle */ bus_dma_tag_t sc_dmat; /* bus DMA tag */ void (*sc_reset)(struct siop_common_softc*); /* reset callback */ bus_dmamap_t sc_scriptdma; /* DMA map for script */ bus_addr_t sc_scriptaddr; /* on-board ram or physical address */ u_int32_t *sc_script; /* script location in memory */ struct siop_common_target *targets[16]; /* per-target states */ }; /* features */ #define SF_BUS_WIDE 0x00000001 /* wide bus */ #define SF_BUS_ULTRA 0x00000002 /* Ultra (20MHz) bus */ #define SF_BUS_ULTRA2 0x00000004 /* Ultra2 (40MHz) bus */ #define SF_BUS_ULTRA3 0x00000008 /* Ultra3 (80MHz) bus */ #define SF_BUS_DIFF 0x00000010 /* differential bus */ #define SF_CHIP_LED0 0x00000100 /* led on GPIO0 */ #define SF_CHIP_LEDC 0x00000200 /* led on GPIO0 with hardware control */ #define SF_CHIP_DBLR 0x00000400 /* clock doubler or quadrupler */ #define SF_CHIP_QUAD 0x00000800 /* clock quadrupler, with PPL */ #define SF_CHIP_FIFO 0x00001000 /* large fifo */ #define SF_CHIP_PF 0x00002000 /* Instructions prefetch */ #define SF_CHIP_RAM 0x00004000 /* on-board RAM */ #define SF_CHIP_LS 0x00008000 /* load/store instruction */ #define SF_CHIP_10REGS 0x00010000 /* 10 scratch registers */ #define SF_CHIP_DFBC 0x00020000 /* Use DFBC register */ #define SF_CHIP_DT 0x00040000 /* DT clocking */ #define SF_CHIP_GEBUG 0x00080000 /* SCSI gross error bug */ #define SF_PCI_RL 0x01000000 /* PCI read line */ #define SF_PCI_RM 0x02000000 /* PCI read multiple */ #define SF_PCI_BOF 0x04000000 /* PCI burst opcode fetch */ #define SF_PCI_CLS 0x08000000 /* PCI cache line size */ #define SF_PCI_WRI 0x10000000 /* PCI write and invalidate */ int siop_common_attach(struct siop_common_softc *); void siop_common_reset(struct siop_common_softc *); void siop_setuptables(struct siop_common_cmd *); int siop_modechange(struct siop_common_softc *); int siop_wdtr_neg(struct siop_common_cmd *); int siop_sdtr_neg(struct siop_common_cmd *); int siop_ppr_neg(struct siop_common_cmd *); void siop_sdtr_msg(struct siop_common_cmd *, int, int, int); void siop_wdtr_msg(struct siop_common_cmd *, int, int); void siop_ppr_msg(struct siop_common_cmd *, int, int, int); void siop_update_xfer_mode(struct siop_common_softc *, int); /* actions to take at return of siop_wdtr_neg() and siop_sdtr_neg() */ #define SIOP_NEG_NOP 0x0 #define SIOP_NEG_MSGOUT 0x1 #define SIOP_NEG_ACK 0x2 void siop_minphys(struct buf *); void siop_sdp(struct siop_common_cmd *); void siop_clearfifo(struct siop_common_softc *); void siop_resetbus(struct siop_common_softc *);