/* $OpenBSD: wdcvar.h,v 1.4 1999/10/29 01:15:15 deraadt Exp $ */ /* $NetBSD: wdcvar.h,v 1.17 1999/04/11 20:50:29 bouyer Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #define WAITTIME (10 * hz) /* time to wait for a completion */ /* this is a lot for hard drives, but not for cdroms */ struct channel_queue { /* per channel queue (may be shared) */ TAILQ_HEAD(xferhead, wdc_xfer) sc_xfer; }; struct channel_softc { /* Per channel data */ /* Our location */ int channel; /* Our controller's softc */ struct wdc_softc *wdc; /* Our registers */ bus_space_tag_t cmd_iot; bus_space_handle_t cmd_ioh; bus_space_tag_t ctl_iot; bus_space_handle_t ctl_ioh; /* data32{iot,ioh} are only used for 32 bit xfers */ bus_space_tag_t data32iot; bus_space_handle_t data32ioh; /* Our state */ int ch_flags; #define WDCF_ACTIVE 0x01 /* channel is active */ #define WDCF_IRQ_WAIT 0x10 /* controller is waiting for irq */ #define WDCF_ONESLAVE 0x20 /* slave-only channel */ u_int8_t ch_status; /* copy of status register */ u_int8_t ch_error; /* copy of error register */ /* per-drive infos */ struct ata_drive_datas ch_drive[2]; /* * channel queues. May be the same for all channels, if hw channels * are not independants */ struct channel_queue *ch_queue; }; struct wdc_softc { /* Per controller state */ struct device sc_dev; /* mandatory fields */ int cap; /* Capabilities supported by the controller */ #define WDC_CAPABILITY_DATA16 0x0001 /* can do 16-bit data access */ #define WDC_CAPABILITY_DATA32 0x0002 /* can do 32-bit data access */ #define WDC_CAPABILITY_MODE 0x0004 /* controller knows its PIO/DMA modes */ #define WDC_CAPABILITY_DMA 0x0008 /* DMA */ #define WDC_CAPABILITY_UDMA 0x0010 /* Ultra-DMA/33 */ #define WDC_CAPABILITY_HWLOCK 0x0020 /* Needs to lock HW */ #define WDC_CAPABILITY_ATA_NOSTREAM 0x0040 /* Don't use stream funcs on ATA */ #define WDC_CAPABILITY_ATAPI_NOSTREAM 0x0080 /* Don't use stream f on ATAPI */ #define WDC_CAPABILITY_NO_EXTRA_RESETS 0x0100 /* only reset once */ #define WDC_CAPABILITY_PREATA 0x0200 /* ctrl can be a pre-ata one */ u_int8_t PIO_cap; /* highest PIO mode supported */ u_int8_t DMA_cap; /* highest DMA mode supported */ u_int8_t UDMA_cap; /* highest UDMA mode supported */ int nchannels; /* Number of channels on this controller */ struct channel_softc **channels; /* channels-specific datas (array) */ #if 0 /* * The reference count here is used for both IDE and ATAPI devices. */ struct scsipi_adapter sc_atapi_adapter; #endif /* if WDC_CAPABILITY_DMA set in 'cap' */ void *dma_arg; int (*dma_init) __P((void *, int, int, void *, size_t, int)); void (*dma_start) __P((void *, int, int, int)); int (*dma_finish) __P((void *, int, int, int)); /* flags passed to DMA functions */ #define WDC_DMA_READ 0x01 #define WDC_DMA_POLL 0x02 /* if WDC_CAPABILITY_HWLOCK set in 'cap' */ int (*claim_hw) __P((void *, int)); void (*free_hw) __P((void *)); /* if WDC_CAPABILITY_MODE set in 'cap' */ void (*set_modes) __P((struct channel_softc *)); }; /* * Description of a command to be handled by a controller. * These commands are queued in a list. */ struct wdc_xfer { volatile u_int c_flags; #define C_INUSE 0x0001 /* xfer struct is in use */ #define C_ATAPI 0x0002 /* xfer is ATAPI request */ #define C_TIMEOU 0x0004 /* xfer processing timed out */ #define C_NEEDDONE 0x0010 /* need to call upper-level done */ #define C_POLL 0x0020 /* cmd is polled */ #define C_DMA 0x0040 /* cmd uses DMA */ #define C_SENSE 0x0080 /* cmd is a internal command */ /* Informations about our location */ struct channel_softc *chp; u_int8_t drive; /* Information about the current transfer */ void *cmd; /* wdc, ata or scsipi command structure */ void *databuf; int c_bcount; /* byte count left */ int c_skip; /* bytes already transferred */ TAILQ_ENTRY(wdc_xfer) c_xferchain; LIST_ENTRY(wdc_xfer) free_list; void (*c_start) __P((struct channel_softc *, struct wdc_xfer *)); int (*c_intr) __P((struct channel_softc *, struct wdc_xfer *, int)); }; /* * Public functions which can be called by ATA or ATAPI specific parts, * or bus-specific backends. */ int wdcprobe __P((struct channel_softc *)); void wdcattach __P((struct channel_softc *)); int wdcintr __P((void *)); void wdc_exec_xfer __P((struct channel_softc *, struct wdc_xfer *)); struct wdc_xfer *wdc_get_xfer __P((int)); /* int = WDC_NOSLEEP/CANSLEEP */ #define WDC_CANSLEEP 0x00 #define WDC_NOSLEEP 0x01 void wdc_free_xfer __P((struct channel_softc *, struct wdc_xfer *)); void wdcstart __P((struct channel_softc *)); void wdcrestart __P((void*)); int wdcreset __P((struct channel_softc *, int)); #define VERBOSE 1 #define SILENT 0 /* wdcreset will not print errors */ int wdcwait __P((struct channel_softc *, int, int, int)); void wdcbit_bucket __P(( struct channel_softc *, int)); void wdccommand __P((struct channel_softc *, u_int8_t, u_int8_t, u_int16_t, u_int8_t, u_int8_t, u_int8_t, u_int8_t)); void wdccommandshort __P((struct channel_softc *, int, int)); void wdctimeout __P((void *arg)); int wdc_addref __P((struct channel_softc *)); void wdc_delref __P((struct channel_softc *)); /* * ST506 spec says that if READY or SEEKCMPLT go off, then the read or write * command is aborted. */ #define wait_for_drq(chp, timeout) wdcwait((chp), WDCS_DRQ, WDCS_DRQ, (timeout)) #define wait_for_unbusy(chp, timeout) wdcwait((chp), 0, 0, (timeout)) #define wait_for_ready(chp, timeout) wdcwait((chp), WDCS_DRDY, \ WDCS_DRDY, (timeout)) /* ATA/ATAPI specs says a device can take 31s to reset */ #define WDC_RESET_WAIT 31000 void wdc_atapibus_attach __P((struct channel_softc *)); int atapi_print __P((void *, const char *)); void wdc_disable_intr __P((struct channel_softc *)); void wdc_enable_intr __P((struct channel_softc *)); int wdc_select_drive __P((struct channel_softc *, int, int)); void wdc_output_bytes __P((struct ata_drive_datas *drvp, void *, unsigned int)); void wdc_input_bytes __P((struct ata_drive_datas *drvp, void *, unsigned int));