/* $OpenBSD: xl.c,v 1.136 2020/12/12 11:48:52 jan Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: if_xl.c,v 1.77 2000/08/28 20:40:03 wpaul Exp $ */ /* * 3Com 3c90x Etherlink XL PCI NIC driver * * Supports the 3Com "boomerang", "cyclone", and "hurricane" PCI * bus-master chips (3c90x cards and embedded controllers) including * the following: * * 3Com 3c900-TPO 10Mbps/RJ-45 * 3Com 3c900-COMBO 10Mbps/RJ-45,AUI,BNC * 3Com 3c905-TX 10/100Mbps/RJ-45 * 3Com 3c905-T4 10/100Mbps/RJ-45 * 3Com 3c900B-TPO 10Mbps/RJ-45 * 3Com 3c900B-COMBO 10Mbps/RJ-45,AUI,BNC * 3Com 3c900B-TPC 10Mbps/RJ-45,BNC * 3Com 3c900B-FL 10Mbps/Fiber-optic * 3Com 3c905B-COMBO 10/100Mbps/RJ-45,AUI,BNC * 3Com 3c905B-TX 10/100Mbps/RJ-45 * 3Com 3c905B-FL/FX 10/100Mbps/Fiber-optic * 3Com 3c905C-TX 10/100Mbps/RJ-45 (Tornado ASIC) * 3Com 3c980-TX 10/100Mbps server adapter (Hurricane ASIC) * 3Com 3c980C-TX 10/100Mbps server adapter (Tornado ASIC) * 3Com 3cSOHO100-TX 10/100Mbps/RJ-45 (Hurricane ASIC) * 3Com 3c450-TX 10/100Mbps/RJ-45 (Tornado ASIC) * 3Com 3c555 10/100Mbps/RJ-45 (MiniPCI, Laptop Hurricane) * 3Com 3c556 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC) * 3Com 3c556B 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC) * 3Com 3c575TX 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) * 3Com 3c575B 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) * 3Com 3c575C 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) * 3Com 3cxfem656 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) * 3Com 3cxfem656b 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) * 3Com 3cxfem656c 10/100Mbps/RJ-45 (Cardbus, Tornado ASIC) * Dell Optiplex GX1 on-board 3c918 10/100Mbps/RJ-45 * Dell on-board 3c920 10/100Mbps/RJ-45 * Dell Precision on-board 3c905B 10/100Mbps/RJ-45 * Dell Latitude laptop docking station embedded 3c905-TX * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The 3c90x series chips use a bus-master DMA interface for transferring * packets to and from the controller chip. Some of the "vortex" cards * (3c59x) also supported a bus master mode, however for those chips * you could only DMA packets to/from a contiguous memory buffer. For * transmission this would mean copying the contents of the queued mbuf * chain into an mbuf cluster and then DMAing the cluster. This extra * copy would sort of defeat the purpose of the bus master support for * any packet that doesn't fit into a single mbuf. * * By contrast, the 3c90x cards support a fragment-based bus master * mode where mbuf chains can be encapsulated using TX descriptors. * This is similar to other PCI chips such as the Texas Instruments * ThunderLAN and the Intel 82557/82558. * * The "vortex" driver (if_vx.c) happens to work for the "boomerang" * bus master chips because they maintain the old PIO interface for * backwards compatibility, but starting with the 3c905B and the * "cyclone" chips, the compatibility interface has been dropped. * Since using bus master DMA is a big win, we use this driver to * support the PCI "boomerang" chips even though they work with the * "vortex" driver in order to obtain better performance. */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #endif #include /* * TX Checksumming is disabled by default for two reasons: * - TX Checksumming will occasionally produce corrupt packets * - TX Checksumming seems to reduce performance * * Only 905B/C cards were reported to have this problem, it is possible * that later chips _may_ be immune. */ #define XL905B_TXCSUM_BROKEN 1 int xl_newbuf(struct xl_softc *, struct xl_chain_onefrag *); void xl_stats_update(void *); int xl_encap(struct xl_softc *, struct xl_chain *, struct mbuf * ); void xl_rxeof(struct xl_softc *); void xl_txeof(struct xl_softc *); void xl_txeof_90xB(struct xl_softc *); void xl_txeoc(struct xl_softc *); int xl_intr(void *); void xl_start(struct ifnet *); void xl_start_90xB(struct ifnet *); int xl_ioctl(struct ifnet *, u_long, caddr_t); void xl_freetxrx(struct xl_softc *); void xl_watchdog(struct ifnet *); int xl_ifmedia_upd(struct ifnet *); void xl_ifmedia_sts(struct ifnet *, struct ifmediareq *); int xl_eeprom_wait(struct xl_softc *); int xl_read_eeprom(struct xl_softc *, caddr_t, int, int, int); void xl_mii_sync(struct xl_softc *); void xl_mii_send(struct xl_softc *, u_int32_t, int); int xl_mii_readreg(struct xl_softc *, struct xl_mii_frame *); int xl_mii_writereg(struct xl_softc *, struct xl_mii_frame *); void xl_setcfg(struct xl_softc *); void xl_setmode(struct xl_softc *, uint64_t); void xl_iff(struct xl_softc *); void xl_iff_90x(struct xl_softc *); void xl_iff_905b(struct xl_softc *); int xl_list_rx_init(struct xl_softc *); void xl_fill_rx_ring(struct xl_softc *); int xl_list_tx_init(struct xl_softc *); int xl_list_tx_init_90xB(struct xl_softc *); void xl_wait(struct xl_softc *); void xl_mediacheck(struct xl_softc *); void xl_choose_xcvr(struct xl_softc *, int); int xl_miibus_readreg(struct device *, int, int); void xl_miibus_writereg(struct device *, int, int, int); void xl_miibus_statchg(struct device *); #ifndef SMALL_KERNEL int xl_wol(struct ifnet *, int); void xl_wol_power(struct xl_softc *); #endif int xl_activate(struct device *self, int act) { struct xl_softc *sc = (struct xl_softc *)self; struct ifnet *ifp = &sc->sc_arpcom.ac_if; int rv = 0; switch (act) { case DVACT_SUSPEND: if (ifp->if_flags & IFF_RUNNING) xl_stop(sc); rv = config_activate_children(self, act); break; case DVACT_RESUME: if (ifp->if_flags & IFF_UP) xl_init(sc); break; case DVACT_POWERDOWN: rv = config_activate_children(self, act); #ifndef SMALL_KERNEL xl_wol_power(sc); #endif break; default: rv = config_activate_children(self, act); break; } return (rv); } /* * Murphy's law says that it's possible the chip can wedge and * the 'command in progress' bit may never clear. Hence, we wait * only a finite amount of time to avoid getting caught in an * infinite loop. Normally this delay routine would be a macro, * but it isn't called during normal operation so we can afford * to make it a function. */ void xl_wait(struct xl_softc *sc) { int i; for (i = 0; i < XL_TIMEOUT; i++) { if (!(CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY)) break; } if (i == XL_TIMEOUT) printf("%s: command never completed!\n", sc->sc_dev.dv_xname); } /* * MII access routines are provided for adapters with external * PHYs (3c905-TX, 3c905-T4, 3c905B-T4) and those with built-in * autoneg logic that's faked up to look like a PHY (3c905B-TX). * Note: if you don't perform the MDIO operations just right, * it's possible to end up with code that works correctly with * some chips/CPUs/processor speeds/bus speeds/etc but not * with others. */ #define MII_SET(x) \ CSR_WRITE_2(sc, XL_W4_PHY_MGMT, \ CSR_READ_2(sc, XL_W4_PHY_MGMT) | (x)) #define MII_CLR(x) \ CSR_WRITE_2(sc, XL_W4_PHY_MGMT, \ CSR_READ_2(sc, XL_W4_PHY_MGMT) & ~(x)) /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ void xl_mii_sync(struct xl_softc *sc) { int i; XL_SEL_WIN(4); MII_SET(XL_MII_DIR|XL_MII_DATA); for (i = 0; i < 32; i++) { MII_SET(XL_MII_CLK); MII_SET(XL_MII_DATA); MII_SET(XL_MII_DATA); MII_CLR(XL_MII_CLK); MII_SET(XL_MII_DATA); MII_SET(XL_MII_DATA); } } /* * Clock a series of bits through the MII. */ void xl_mii_send(struct xl_softc *sc, u_int32_t bits, int cnt) { int i; XL_SEL_WIN(4); MII_CLR(XL_MII_CLK); for (i = (0x1 << (cnt - 1)); i; i >>= 1) { if (bits & i) { MII_SET(XL_MII_DATA); } else { MII_CLR(XL_MII_DATA); } MII_CLR(XL_MII_CLK); MII_SET(XL_MII_CLK); } } /* * Read an PHY register through the MII. */ int xl_mii_readreg(struct xl_softc *sc, struct xl_mii_frame *frame) { int i, ack, s; s = splnet(); /* * Set up frame for RX. */ frame->mii_stdelim = XL_MII_STARTDELIM; frame->mii_opcode = XL_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; /* * Select register window 4. */ XL_SEL_WIN(4); CSR_WRITE_2(sc, XL_W4_PHY_MGMT, 0); /* * Turn on data xmit. */ MII_SET(XL_MII_DIR); xl_mii_sync(sc); /* * Send command/address info. */ xl_mii_send(sc, frame->mii_stdelim, 2); xl_mii_send(sc, frame->mii_opcode, 2); xl_mii_send(sc, frame->mii_phyaddr, 5); xl_mii_send(sc, frame->mii_regaddr, 5); /* Idle bit */ MII_CLR((XL_MII_CLK|XL_MII_DATA)); MII_SET(XL_MII_CLK); /* Turn off xmit. */ MII_CLR(XL_MII_DIR); /* Check for ack */ MII_CLR(XL_MII_CLK); ack = CSR_READ_2(sc, XL_W4_PHY_MGMT) & XL_MII_DATA; MII_SET(XL_MII_CLK); /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for(i = 0; i < 16; i++) { MII_CLR(XL_MII_CLK); MII_SET(XL_MII_CLK); } goto fail; } for (i = 0x8000; i; i >>= 1) { MII_CLR(XL_MII_CLK); if (!ack) { if (CSR_READ_2(sc, XL_W4_PHY_MGMT) & XL_MII_DATA) frame->mii_data |= i; } MII_SET(XL_MII_CLK); } fail: MII_CLR(XL_MII_CLK); MII_SET(XL_MII_CLK); splx(s); if (ack) return (1); return (0); } /* * Write to a PHY register through the MII. */ int xl_mii_writereg(struct xl_softc *sc, struct xl_mii_frame *frame) { int s; s = splnet(); /* * Set up frame for TX. */ frame->mii_stdelim = XL_MII_STARTDELIM; frame->mii_opcode = XL_MII_WRITEOP; frame->mii_turnaround = XL_MII_TURNAROUND; /* * Select the window 4. */ XL_SEL_WIN(4); /* * Turn on data output. */ MII_SET(XL_MII_DIR); xl_mii_sync(sc); xl_mii_send(sc, frame->mii_stdelim, 2); xl_mii_send(sc, frame->mii_opcode, 2); xl_mii_send(sc, frame->mii_phyaddr, 5); xl_mii_send(sc, frame->mii_regaddr, 5); xl_mii_send(sc, frame->mii_turnaround, 2); xl_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ MII_SET(XL_MII_CLK); MII_CLR(XL_MII_CLK); /* * Turn off xmit. */ MII_CLR(XL_MII_DIR); splx(s); return (0); } int xl_miibus_readreg(struct device *self, int phy, int reg) { struct xl_softc *sc = (struct xl_softc *)self; struct xl_mii_frame frame; if (!(sc->xl_flags & XL_FLAG_PHYOK) && phy != 24) return (0); bzero(&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; xl_mii_readreg(sc, &frame); return (frame.mii_data); } void xl_miibus_writereg(struct device *self, int phy, int reg, int data) { struct xl_softc *sc = (struct xl_softc *)self; struct xl_mii_frame frame; if (!(sc->xl_flags & XL_FLAG_PHYOK) && phy != 24) return; bzero(&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = data; xl_mii_writereg(sc, &frame); } void xl_miibus_statchg(struct device *self) { struct xl_softc *sc = (struct xl_softc *)self; xl_setcfg(sc); /* Set ASIC's duplex mode to match the PHY. */ XL_SEL_WIN(3); if ((sc->sc_mii.mii_media_active & IFM_GMASK) == IFM_FDX) CSR_WRITE_1(sc, XL_W3_MAC_CTRL, XL_MACCTRL_DUPLEX); else CSR_WRITE_1(sc, XL_W3_MAC_CTRL, (CSR_READ_1(sc, XL_W3_MAC_CTRL) & ~XL_MACCTRL_DUPLEX)); } /* * The EEPROM is slow: give it time to come ready after issuing * it a command. */ int xl_eeprom_wait(struct xl_softc *sc) { int i; for (i = 0; i < 100; i++) { if (CSR_READ_2(sc, XL_W0_EE_CMD) & XL_EE_BUSY) DELAY(162); else break; } if (i == 100) { printf("%s: eeprom failed to come ready\n", sc->sc_dev.dv_xname); return (1); } return (0); } /* * Read a sequence of words from the EEPROM. Note that ethernet address * data is stored in the EEPROM in network byte order. */ int xl_read_eeprom(struct xl_softc *sc, caddr_t dest, int off, int cnt, int swap) { int err = 0, i; u_int16_t word = 0, *ptr; #define EEPROM_5BIT_OFFSET(A) ((((A) << 2) & 0x7F00) | ((A) & 0x003F)) #define EEPROM_8BIT_OFFSET(A) ((A) & 0x003F) /* WARNING! DANGER! * It's easy to accidentally overwrite the rom content! * Note: the 3c575 uses 8bit EEPROM offsets. */ XL_SEL_WIN(0); if (xl_eeprom_wait(sc)) return (1); if (sc->xl_flags & XL_FLAG_EEPROM_OFFSET_30) off += 0x30; for (i = 0; i < cnt; i++) { if (sc->xl_flags & XL_FLAG_8BITROM) CSR_WRITE_2(sc, XL_W0_EE_CMD, XL_EE_8BIT_READ | EEPROM_8BIT_OFFSET(off + i)); else CSR_WRITE_2(sc, XL_W0_EE_CMD, XL_EE_READ | EEPROM_5BIT_OFFSET(off + i)); err = xl_eeprom_wait(sc); if (err) break; word = CSR_READ_2(sc, XL_W0_EE_DATA); ptr = (u_int16_t *)(dest + (i * 2)); if (swap) *ptr = ntohs(word); else *ptr = word; } return (err ? 1 : 0); } void xl_iff(struct xl_softc *sc) { if (sc->xl_type == XL_TYPE_905B) xl_iff_905b(sc); else xl_iff_90x(sc); } /* * NICs older than the 3c905B have only one multicast option, which * is to enable reception of all multicast frames. */ void xl_iff_90x(struct xl_softc *sc) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; struct arpcom *ac = &sc->sc_arpcom; u_int8_t rxfilt; XL_SEL_WIN(5); rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER); rxfilt &= ~(XL_RXFILTER_ALLFRAMES | XL_RXFILTER_ALLMULTI | XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL); ifp->if_flags &= ~IFF_ALLMULTI; /* * Always accept broadcast frames. * Always accept frames destined to our station address. */ rxfilt |= XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL; if (ifp->if_flags & IFF_PROMISC || ac->ac_multicnt > 0) { ifp->if_flags |= IFF_ALLMULTI; if (ifp->if_flags & IFF_PROMISC) rxfilt |= XL_RXFILTER_ALLFRAMES; else rxfilt |= XL_RXFILTER_ALLMULTI; } CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT | rxfilt); XL_SEL_WIN(7); } /* * 3c905B adapters have a hash filter that we can program. */ void xl_iff_905b(struct xl_softc *sc) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; struct arpcom *ac = &sc->sc_arpcom; int h = 0, i; struct ether_multi *enm; struct ether_multistep step; u_int8_t rxfilt; XL_SEL_WIN(5); rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER); rxfilt &= ~(XL_RXFILTER_ALLFRAMES | XL_RXFILTER_ALLMULTI | XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL | XL_RXFILTER_MULTIHASH); ifp->if_flags &= ~IFF_ALLMULTI; /* * Always accept broadcast frames. * Always accept frames destined to our station address. */ rxfilt |= XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL; if (ifp->if_flags & IFF_PROMISC || ac->ac_multirangecnt > 0) { ifp->if_flags |= IFF_ALLMULTI; if (ifp->if_flags & IFF_PROMISC) rxfilt |= XL_RXFILTER_ALLFRAMES; else rxfilt |= XL_RXFILTER_ALLMULTI; } else { rxfilt |= XL_RXFILTER_MULTIHASH; /* first, zot all the existing hash bits */ for (i = 0; i < XL_HASHFILT_SIZE; i++) CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_HASH|i); /* now program new ones */ ETHER_FIRST_MULTI(step, ac, enm); while (enm != NULL) { h = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN) & 0x000000FF; CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_HASH | XL_HASH_SET | h); ETHER_NEXT_MULTI(step, enm); } } CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT | rxfilt); XL_SEL_WIN(7); } void xl_setcfg(struct xl_softc *sc) { u_int32_t icfg; XL_SEL_WIN(3); icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG); icfg &= ~XL_ICFG_CONNECTOR_MASK; if (sc->xl_media & XL_MEDIAOPT_MII || sc->xl_media & XL_MEDIAOPT_BT4) icfg |= (XL_XCVR_MII << XL_ICFG_CONNECTOR_BITS); if (sc->xl_media & XL_MEDIAOPT_BTX) icfg |= (XL_XCVR_AUTO << XL_ICFG_CONNECTOR_BITS); CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); } void xl_setmode(struct xl_softc *sc, uint64_t media) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; u_int32_t icfg; u_int16_t mediastat; XL_SEL_WIN(4); mediastat = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); XL_SEL_WIN(3); icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG); if (sc->xl_media & XL_MEDIAOPT_BT) { if (IFM_SUBTYPE(media) == IFM_10_T) { ifp->if_baudrate = IF_Mbps(10); sc->xl_xcvr = XL_XCVR_10BT; icfg &= ~XL_ICFG_CONNECTOR_MASK; icfg |= (XL_XCVR_10BT << XL_ICFG_CONNECTOR_BITS); mediastat |= XL_MEDIASTAT_LINKBEAT| XL_MEDIASTAT_JABGUARD; mediastat &= ~XL_MEDIASTAT_SQEENB; } } if (sc->xl_media & XL_MEDIAOPT_BFX) { if (IFM_SUBTYPE(media) == IFM_100_FX) { ifp->if_baudrate = IF_Mbps(100); sc->xl_xcvr = XL_XCVR_100BFX; icfg &= ~XL_ICFG_CONNECTOR_MASK; icfg |= (XL_XCVR_100BFX << XL_ICFG_CONNECTOR_BITS); mediastat |= XL_MEDIASTAT_LINKBEAT; mediastat &= ~XL_MEDIASTAT_SQEENB; } } if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) { if (IFM_SUBTYPE(media) == IFM_10_5) { ifp->if_baudrate = IF_Mbps(10); sc->xl_xcvr = XL_XCVR_AUI; icfg &= ~XL_ICFG_CONNECTOR_MASK; icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS); mediastat &= ~(XL_MEDIASTAT_LINKBEAT| XL_MEDIASTAT_JABGUARD); mediastat |= ~XL_MEDIASTAT_SQEENB; } if (IFM_SUBTYPE(media) == IFM_10_FL) { ifp->if_baudrate = IF_Mbps(10); sc->xl_xcvr = XL_XCVR_AUI; icfg &= ~XL_ICFG_CONNECTOR_MASK; icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS); mediastat &= ~(XL_MEDIASTAT_LINKBEAT| XL_MEDIASTAT_JABGUARD); mediastat |= ~XL_MEDIASTAT_SQEENB; } } if (sc->xl_media & XL_MEDIAOPT_BNC) { if (IFM_SUBTYPE(media) == IFM_10_2) { ifp->if_baudrate = IF_Mbps(10); sc->xl_xcvr = XL_XCVR_COAX; icfg &= ~XL_ICFG_CONNECTOR_MASK; icfg |= (XL_XCVR_COAX << XL_ICFG_CONNECTOR_BITS); mediastat &= ~(XL_MEDIASTAT_LINKBEAT| XL_MEDIASTAT_JABGUARD| XL_MEDIASTAT_SQEENB); } } if ((media & IFM_GMASK) == IFM_FDX || IFM_SUBTYPE(media) == IFM_100_FX) { XL_SEL_WIN(3); CSR_WRITE_1(sc, XL_W3_MAC_CTRL, XL_MACCTRL_DUPLEX); } else { XL_SEL_WIN(3); CSR_WRITE_1(sc, XL_W3_MAC_CTRL, (CSR_READ_1(sc, XL_W3_MAC_CTRL) & ~XL_MACCTRL_DUPLEX)); } if (IFM_SUBTYPE(media) == IFM_10_2) CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START); else CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg); XL_SEL_WIN(4); CSR_WRITE_2(sc, XL_W4_MEDIA_STATUS, mediastat); DELAY(800); XL_SEL_WIN(7); } void xl_reset(struct xl_softc *sc) { int i; XL_SEL_WIN(0); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RESET | ((sc->xl_flags & XL_FLAG_WEIRDRESET) ? XL_RESETOPT_DISADVFD:0)); /* * Pause briefly after issuing the reset command before trying * to access any other registers. With my 3c575C cardbus card, * failing to do this results in the system locking up while * trying to poll the command busy bit in the status register. */ DELAY(100000); for (i = 0; i < XL_TIMEOUT; i++) { DELAY(10); if (!(CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY)) break; } if (i == XL_TIMEOUT) printf("%s: reset didn't complete\n", sc->sc_dev.dv_xname); /* Note: the RX reset takes an absurd amount of time * on newer versions of the Tornado chips such as those * on the 3c905CX and newer 3c908C cards. We wait an * extra amount of time so that xl_wait() doesn't complain * and annoy the users. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); DELAY(100000); xl_wait(sc); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); xl_wait(sc); if (sc->xl_flags & XL_FLAG_INVERT_LED_PWR || sc->xl_flags & XL_FLAG_INVERT_MII_PWR) { XL_SEL_WIN(2); CSR_WRITE_2(sc, XL_W2_RESET_OPTIONS, CSR_READ_2(sc, XL_W2_RESET_OPTIONS) | ((sc->xl_flags & XL_FLAG_INVERT_LED_PWR)?XL_RESETOPT_INVERT_LED:0) | ((sc->xl_flags & XL_FLAG_INVERT_MII_PWR)?XL_RESETOPT_INVERT_MII:0) ); } /* Wait a little while for the chip to get its brains in order. */ DELAY(100000); } /* * This routine is a kludge to work around possible hardware faults * or manufacturing defects that can cause the media options register * (or reset options register, as it's called for the first generation * 3c90x adapters) to return an incorrect result. I have encountered * one Dell Latitude laptop docking station with an integrated 3c905-TX * which doesn't have any of the 'mediaopt' bits set. This screws up * the attach routine pretty badly because it doesn't know what media * to look for. If we find ourselves in this predicament, this routine * will try to guess the media options values and warn the user of a * possible manufacturing defect with his adapter/system/whatever. */ void xl_mediacheck(struct xl_softc *sc) { /* * If some of the media options bits are set, assume they are * correct. If not, try to figure it out down below. * XXX I should check for 10baseFL, but I don't have an adapter * to test with. */ if (sc->xl_media & (XL_MEDIAOPT_MASK & ~XL_MEDIAOPT_VCO)) { /* * Check the XCVR value. If it's not in the normal range * of values, we need to fake it up here. */ if (sc->xl_xcvr <= XL_XCVR_AUTO) return; else { printf("%s: bogus xcvr value " "in EEPROM (%x)\n", sc->sc_dev.dv_xname, sc->xl_xcvr); printf("%s: choosing new default based " "on card type\n", sc->sc_dev.dv_xname); } } else { if (sc->xl_type == XL_TYPE_905B && sc->xl_media & XL_MEDIAOPT_10FL) return; printf("%s: WARNING: no media options bits set in " "the media options register!!\n", sc->sc_dev.dv_xname); printf("%s: this could be a manufacturing defect in " "your adapter or system\n", sc->sc_dev.dv_xname); printf("%s: attempting to guess media type; you " "should probably consult your vendor\n", sc->sc_dev.dv_xname); } xl_choose_xcvr(sc, 1); } void xl_choose_xcvr(struct xl_softc *sc, int verbose) { u_int16_t devid; /* * Read the device ID from the EEPROM. * This is what's loaded into the PCI device ID register, so it has * to be correct otherwise we wouldn't have gotten this far. */ xl_read_eeprom(sc, (caddr_t)&devid, XL_EE_PRODID, 1, 0); switch(devid) { case TC_DEVICEID_BOOMERANG_10BT: /* 3c900-TPO */ case TC_DEVICEID_KRAKATOA_10BT: /* 3c900B-TPO */ sc->xl_media = XL_MEDIAOPT_BT; sc->xl_xcvr = XL_XCVR_10BT; if (verbose) printf("%s: guessing 10BaseT transceiver\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_BOOMERANG_10BT_COMBO: /* 3c900-COMBO */ case TC_DEVICEID_KRAKATOA_10BT_COMBO: /* 3c900B-COMBO */ sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI; sc->xl_xcvr = XL_XCVR_10BT; if (verbose) printf("%s: guessing COMBO (AUI/BNC/TP)\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_KRAKATOA_10BT_TPC: /* 3c900B-TPC */ sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC; sc->xl_xcvr = XL_XCVR_10BT; if (verbose) printf("%s: guessing TPC (BNC/TP)\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_CYCLONE_10FL: /* 3c900B-FL */ sc->xl_media = XL_MEDIAOPT_10FL; sc->xl_xcvr = XL_XCVR_AUI; if (verbose) printf("%s: guessing 10baseFL\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */ case TC_DEVICEID_HURRICANE_555: /* 3c555 */ case TC_DEVICEID_HURRICANE_556: /* 3c556 */ case TC_DEVICEID_HURRICANE_556B: /* 3c556B */ case TC_DEVICEID_HURRICANE_575A: /* 3c575TX */ case TC_DEVICEID_HURRICANE_575B: /* 3c575B */ case TC_DEVICEID_HURRICANE_575C: /* 3c575C */ case TC_DEVICEID_HURRICANE_656: /* 3c656 */ case TC_DEVICEID_HURRICANE_656B: /* 3c656B */ case TC_DEVICEID_TORNADO_656C: /* 3c656C */ case TC_DEVICEID_TORNADO_10_100BT_920B: /* 3c920B-EMB */ sc->xl_media = XL_MEDIAOPT_MII; sc->xl_xcvr = XL_XCVR_MII; if (verbose) printf("%s: guessing MII\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_BOOMERANG_100BT4: /* 3c905-T4 */ case TC_DEVICEID_CYCLONE_10_100BT4: /* 3c905B-T4 */ sc->xl_media = XL_MEDIAOPT_BT4; sc->xl_xcvr = XL_XCVR_MII; if (verbose) printf("%s: guessing 100BaseT4/MII\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_HURRICANE_10_100BT: /* 3c905B-TX */ case TC_DEVICEID_HURRICANE_10_100BT_SERV:/* 3c980-TX */ case TC_DEVICEID_TORNADO_10_100BT_SERV: /* 3c980C-TX */ case TC_DEVICEID_HURRICANE_SOHO100TX: /* 3cSOHO100-TX */ case TC_DEVICEID_TORNADO_10_100BT: /* 3c905C-TX */ case TC_DEVICEID_TORNADO_HOMECONNECT: /* 3c450-TX */ sc->xl_media = XL_MEDIAOPT_BTX; sc->xl_xcvr = XL_XCVR_AUTO; if (verbose) printf("%s: guessing 10/100 internal\n", sc->sc_dev.dv_xname); break; case TC_DEVICEID_CYCLONE_10_100_COMBO: /* 3c905B-COMBO */ sc->xl_media = XL_MEDIAOPT_BTX|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI; sc->xl_xcvr = XL_XCVR_AUTO; if (verbose) printf("%s: guessing 10/100 plus BNC/AUI\n", sc->sc_dev.dv_xname); break; default: printf("%s: unknown device ID: %x -- " "defaulting to 10baseT\n", sc->sc_dev.dv_xname, devid); sc->xl_media = XL_MEDIAOPT_BT; break; } } /* * Initialize the transmit descriptors. */ int xl_list_tx_init(struct xl_softc *sc) { struct xl_chain_data *cd; struct xl_list_data *ld; int i; cd = &sc->xl_cdata; ld = sc->xl_ldata; for (i = 0; i < XL_TX_LIST_CNT; i++) { cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i]; if (i == (XL_TX_LIST_CNT - 1)) cd->xl_tx_chain[i].xl_next = NULL; else cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1]; } cd->xl_tx_free = &cd->xl_tx_chain[0]; cd->xl_tx_tail = cd->xl_tx_head = NULL; return (0); } /* * Initialize the transmit descriptors. */ int xl_list_tx_init_90xB(struct xl_softc *sc) { struct xl_chain_data *cd; struct xl_list_data *ld; int i, next, prev; cd = &sc->xl_cdata; ld = sc->xl_ldata; for (i = 0; i < XL_TX_LIST_CNT; i++) { if (i == (XL_TX_LIST_CNT - 1)) next = 0; else next = i + 1; if (i == 0) prev = XL_TX_LIST_CNT - 1; else prev = i - 1; cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i]; cd->xl_tx_chain[i].xl_phys = sc->sc_listmap->dm_segs[0].ds_addr + offsetof(struct xl_list_data, xl_tx_list[i]); cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[next]; cd->xl_tx_chain[i].xl_prev = &cd->xl_tx_chain[prev]; } bzero(ld->xl_tx_list, sizeof(struct xl_list) * XL_TX_LIST_CNT); ld->xl_tx_list[0].xl_status = htole32(XL_TXSTAT_EMPTY); cd->xl_tx_prod = 1; cd->xl_tx_cons = 1; cd->xl_tx_cnt = 0; return (0); } /* * Initialize the RX descriptors and allocate mbufs for them. Note that * we arrange the descriptors in a closed ring, so that the last descriptor * points back to the first. */ int xl_list_rx_init(struct xl_softc *sc) { struct xl_chain_data *cd; struct xl_list_data *ld; int i, n; bus_addr_t next; cd = &sc->xl_cdata; ld = sc->xl_ldata; for (i = 0; i < XL_RX_LIST_CNT; i++) { cd->xl_rx_chain[i].xl_ptr = (struct xl_list_onefrag *)&ld->xl_rx_list[i]; if (i == (XL_RX_LIST_CNT - 1)) n = 0; else n = i + 1; cd->xl_rx_chain[i].xl_next = &cd->xl_rx_chain[n]; next = sc->sc_listmap->dm_segs[0].ds_addr + offsetof(struct xl_list_data, xl_rx_list[n]); ld->xl_rx_list[i].xl_next = htole32(next); } cd->xl_rx_prod = cd->xl_rx_cons = &cd->xl_rx_chain[0]; if_rxr_init(&cd->xl_rx_ring, 2, XL_RX_LIST_CNT - 1); xl_fill_rx_ring(sc); return (0); } void xl_fill_rx_ring(struct xl_softc *sc) { struct xl_chain_data *cd; u_int slots; cd = &sc->xl_cdata; for (slots = if_rxr_get(&cd->xl_rx_ring, XL_RX_LIST_CNT); slots > 0; slots--) { if (xl_newbuf(sc, cd->xl_rx_prod) == ENOBUFS) break; cd->xl_rx_prod = cd->xl_rx_prod->xl_next; } if_rxr_put(&cd->xl_rx_ring, slots); } /* * Initialize an RX descriptor and attach an MBUF cluster. */ int xl_newbuf(struct xl_softc *sc, struct xl_chain_onefrag *c) { struct mbuf *m_new = NULL; bus_dmamap_t map; m_new = MCLGETL(NULL, M_DONTWAIT, MCLBYTES); if (!m_new) return (ENOBUFS); m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; if (bus_dmamap_load(sc->sc_dmat, sc->sc_rx_sparemap, mtod(m_new, caddr_t), MCLBYTES, NULL, BUS_DMA_NOWAIT) != 0) { m_freem(m_new); return (ENOBUFS); } /* sync the old map, and unload it (if necessary) */ if (c->map->dm_nsegs != 0) { bus_dmamap_sync(sc->sc_dmat, c->map, 0, c->map->dm_mapsize, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_dmat, c->map); } map = c->map; c->map = sc->sc_rx_sparemap; sc->sc_rx_sparemap = map; /* Force longword alignment for packet payload. */ m_adj(m_new, ETHER_ALIGN); bus_dmamap_sync(sc->sc_dmat, c->map, 0, c->map->dm_mapsize, BUS_DMASYNC_PREREAD); c->xl_mbuf = m_new; c->xl_ptr->xl_frag.xl_addr = htole32(c->map->dm_segs[0].ds_addr + ETHER_ALIGN); c->xl_ptr->xl_frag.xl_len = htole32(c->map->dm_segs[0].ds_len | XL_LAST_FRAG); c->xl_ptr->xl_status = htole32(0); bus_dmamap_sync(sc->sc_dmat, sc->sc_listmap, ((caddr_t)c->xl_ptr - sc->sc_listkva), sizeof(struct xl_list), BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ void xl_rxeof(struct xl_softc *sc) { struct mbuf_list ml = MBUF_LIST_INITIALIZER(); struct mbuf *m; struct ifnet *ifp; struct xl_chain_onefrag *cur_rx; int total_len = 0; u_int32_t rxstat; u_int16_t sumflags = 0; ifp = &sc->sc_arpcom.ac_if; again: while (if_rxr_inuse(&sc->xl_cdata.xl_rx_ring) > 0) { cur_rx = sc->xl_cdata.xl_rx_cons; bus_dmamap_sync(sc->sc_dmat, sc->sc_listmap, ((caddr_t)cur_rx->xl_ptr - sc->sc_listkva), sizeof(struct xl_list), BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); if ((rxstat = letoh32(sc->xl_cdata.xl_rx_cons->xl_ptr->xl_status)) == 0) break; m = cur_rx->xl_mbuf; cur_rx->xl_mbuf = NULL; sc->xl_cdata.xl_rx_cons = cur_rx->xl_next; if_rxr_put(&sc->xl_cdata.xl_rx_ring, 1); total_len = rxstat & XL_RXSTAT_LENMASK; /* * Since we have told the chip to allow large frames, * we need to trap giant frame errors in software. We allow * a little more than the normal frame size to account for * frames with VLAN tags. */ if (total_len > XL_MAX_FRAMELEN) rxstat |= (XL_RXSTAT_UP_ERROR|XL_RXSTAT_OVERSIZE); /* * If an error occurs, update stats, clear the * status word and leave the mbuf cluster in place: * it should simply get re-used next time this descriptor * comes up in the ring. */ if (rxstat & XL_RXSTAT_UP_ERROR) { ifp->if_ierrors++; cur_rx->xl_ptr->xl_status = htole32(0); m_freem(m); continue; } /* * If the error bit was not set, the upload complete * bit should be set which means we have a valid packet. * If not, something truly strange has happened. */ if (!(rxstat & XL_RXSTAT_UP_CMPLT)) { printf("%s: bad receive status -- " "packet dropped\n", sc->sc_dev.dv_xname); ifp->if_ierrors++; cur_rx->xl_ptr->xl_status = htole32(0); m_freem(m); continue; } m->m_pkthdr.len = m->m_len = total_len; if (sc->xl_type == XL_TYPE_905B) { if (!(rxstat & XL_RXSTAT_IPCKERR) && (rxstat & XL_RXSTAT_IPCKOK)) sumflags |= M_IPV4_CSUM_IN_OK; if (!(rxstat & XL_RXSTAT_TCPCKERR) && (rxstat & XL_RXSTAT_TCPCKOK)) sumflags |= M_TCP_CSUM_IN_OK; if (!(rxstat & XL_RXSTAT_UDPCKERR) && (rxstat & XL_RXSTAT_UDPCKOK)) sumflags |= M_UDP_CSUM_IN_OK; m->m_pkthdr.csum_flags = sumflags; } ml_enqueue(&ml, m); } if (ifiq_input(&ifp->if_rcv, &ml)) if_rxr_livelocked(&sc->xl_cdata.xl_rx_ring); xl_fill_rx_ring(sc); /* * Handle the 'end of channel' condition. When the upload * engine hits the end of the RX ring, it will stall. This * is our cue to flush the RX ring, reload the uplist pointer * register and unstall the engine. * XXX This is actually a little goofy. With the ThunderLAN * chip, you get an interrupt when the receiver hits the end * of the receive ring, which tells you exactly when you * you need to reload the ring pointer. Here we have to * fake it. I'm mad at myself for not being clever enough * to avoid the use of a goto here. */ if (CSR_READ_4(sc, XL_UPLIST_PTR) == 0 || CSR_READ_4(sc, XL_UPLIST_STATUS) & XL_PKTSTAT_UP_STALLED) { CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL); xl_wait(sc); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL); xl_fill_rx_ring(sc); goto again; } } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ void xl_txeof(struct xl_softc *sc) { struct xl_chain *cur_tx; struct ifnet *ifp; ifp = &sc->sc_arpcom.ac_if; /* * Go through our tx list and free mbufs for those * frames that have been uploaded. Note: the 3c905B * sets a special bit in the status word to let us * know that a frame has been downloaded, but the * original 3c900/3c905 adapters don't do that. * Consequently, we have to use a different test if * xl_type != XL_TYPE_905B. */ while (sc->xl_cdata.xl_tx_head != NULL) { cur_tx = sc->xl_cdata.xl_tx_head; bus_dmamap_sync(sc->sc_dmat, sc->sc_listmap, ((caddr_t)cur_tx->xl_ptr - sc->sc_listkva), sizeof(struct xl_list), BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); if (CSR_READ_4(sc, XL_DOWNLIST_PTR)) break; sc->xl_cdata.xl_tx_head = cur_tx->xl_next; if (cur_tx->map->dm_nsegs != 0) { bus_dmamap_t map = cur_tx->map; bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, map); } if (cur_tx->xl_mbuf != NULL) { m_freem(cur_tx->xl_mbuf); cur_tx->xl_mbuf = NULL; } cur_tx->xl_next = sc->xl_cdata.xl_tx_free; sc->xl_cdata.xl_tx_free = cur_tx; } if (sc->xl_cdata.xl_tx_head == NULL) { ifq_clr_oactive(&ifp->if_snd); /* Clear the timeout timer. */ ifp->if_timer = 0; sc->xl_cdata.xl_tx_tail = NULL; } else { if (CSR_READ_4(sc, XL_DMACTL) & XL_DMACTL_DOWN_STALLED || !CSR_READ_4(sc, XL_DOWNLIST_PTR)) { CSR_WRITE_4(sc, XL_DOWNLIST_PTR, sc->sc_listmap->dm_segs[0].ds_addr + ((caddr_t)sc->xl_cdata.xl_tx_head->xl_ptr - sc->sc_listkva)); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); } } } void xl_txeof_90xB(struct xl_softc *sc) { struct xl_chain *cur_tx = NULL; struct ifnet *ifp; int idx; ifp = &sc->sc_arpcom.ac_if; idx = sc->xl_cdata.xl_tx_cons; while (idx != sc->xl_cdata.xl_tx_prod) { cur_tx = &sc->xl_cdata.xl_tx_chain[idx]; if ((cur_tx->xl_ptr->xl_status & htole32(XL_TXSTAT_DL_COMPLETE)) == 0) break; if (cur_tx->xl_mbuf != NULL) { m_freem(cur_tx->xl_mbuf); cur_tx->xl_mbuf = NULL; } if (cur_tx->map->dm_nsegs != 0) { bus_dmamap_sync(sc->sc_dmat, cur_tx->map, 0, cur_tx->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, cur_tx->map); } sc->xl_cdata.xl_tx_cnt--; XL_INC(idx, XL_TX_LIST_CNT); } sc->xl_cdata.xl_tx_cons = idx; if (cur_tx != NULL) ifq_clr_oactive(&ifp->if_snd); if (sc->xl_cdata.xl_tx_cnt == 0) ifp->if_timer = 0; } /* * TX 'end of channel' interrupt handler. Actually, we should * only get a 'TX complete' interrupt if there's a transmit error, * so this is really TX error handler. */ void xl_txeoc(struct xl_softc *sc) { u_int8_t txstat; while ((txstat = CSR_READ_1(sc, XL_TX_STATUS))) { if (txstat & XL_TXSTATUS_UNDERRUN || txstat & XL_TXSTATUS_JABBER || txstat & XL_TXSTATUS_RECLAIM) { if (txstat != 0x90) { printf("%s: transmission error: %x\n", sc->sc_dev.dv_xname, txstat); } CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); xl_wait(sc); if (sc->xl_type == XL_TYPE_905B) { if (sc->xl_cdata.xl_tx_cnt) { int i; struct xl_chain *c; i = sc->xl_cdata.xl_tx_cons; c = &sc->xl_cdata.xl_tx_chain[i]; CSR_WRITE_4(sc, XL_DOWNLIST_PTR, c->xl_phys); CSR_WRITE_1(sc, XL_DOWN_POLL, 64); } } else { if (sc->xl_cdata.xl_tx_head != NULL) CSR_WRITE_4(sc, XL_DOWNLIST_PTR, sc->sc_listmap->dm_segs[0].ds_addr + ((caddr_t)sc->xl_cdata.xl_tx_head->xl_ptr - sc->sc_listkva)); } /* * Remember to set this for the * first generation 3c90X chips. */ CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8); if (txstat & XL_TXSTATUS_UNDERRUN && sc->xl_tx_thresh < XL_PACKET_SIZE) { sc->xl_tx_thresh += XL_MIN_FRAMELEN; #ifdef notdef printf("%s: tx underrun, increasing tx start" " threshold to %d\n", sc->sc_dev.dv_xname, sc->xl_tx_thresh); #endif } CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_SET_START|sc->xl_tx_thresh); if (sc->xl_type == XL_TYPE_905B) { CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4)); } CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); } else { CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); } /* * Write an arbitrary byte to the TX_STATUS register * to clear this interrupt/error and advance to the next. */ CSR_WRITE_1(sc, XL_TX_STATUS, 0x01); } } int xl_intr(void *arg) { struct xl_softc *sc; struct ifnet *ifp; u_int16_t status; int claimed = 0; sc = arg; ifp = &sc->sc_arpcom.ac_if; while ((status = CSR_READ_2(sc, XL_STATUS)) & XL_INTRS && status != 0xFFFF) { claimed = 1; CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|(status & XL_INTRS)); if (sc->intr_ack) (*sc->intr_ack)(sc); if (!(ifp->if_flags & IFF_RUNNING)) return (claimed); if (status & XL_STAT_UP_COMPLETE) xl_rxeof(sc); if (status & XL_STAT_DOWN_COMPLETE) { if (sc->xl_type == XL_TYPE_905B) xl_txeof_90xB(sc); else xl_txeof(sc); } if (status & XL_STAT_TX_COMPLETE) { ifp->if_oerrors++; xl_txeoc(sc); } if (status & XL_STAT_ADFAIL) xl_init(sc); if (status & XL_STAT_STATSOFLOW) { sc->xl_stats_no_timeout = 1; xl_stats_update(sc); sc->xl_stats_no_timeout = 0; } } if (!ifq_empty(&ifp->if_snd)) (*ifp->if_start)(ifp); return (claimed); } void xl_stats_update(void *xsc) { struct xl_softc *sc; struct ifnet *ifp; struct xl_stats xl_stats; u_int8_t *p; int i; struct mii_data *mii = NULL; bzero(&xl_stats, sizeof(struct xl_stats)); sc = xsc; ifp = &sc->sc_arpcom.ac_if; if (sc->xl_hasmii) mii = &sc->sc_mii; p = (u_int8_t *)&xl_stats; /* Read all the stats registers. */ XL_SEL_WIN(6); for (i = 0; i < 16; i++) *p++ = CSR_READ_1(sc, XL_W6_CARRIER_LOST + i); ifp->if_ierrors += xl_stats.xl_rx_overrun; ifp->if_collisions += xl_stats.xl_tx_multi_collision + xl_stats.xl_tx_single_collision + xl_stats.xl_tx_late_collision; /* * Boomerang and cyclone chips have an extra stats counter * in window 4 (BadSSD). We have to read this too in order * to clear out all the stats registers and avoid a statsoflow * interrupt. */ XL_SEL_WIN(4); CSR_READ_1(sc, XL_W4_BADSSD); if (mii != NULL && (!sc->xl_stats_no_timeout)) mii_tick(mii); XL_SEL_WIN(7); if (!sc->xl_stats_no_timeout) timeout_add_sec(&sc->xl_stsup_tmo, 1); } /* * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data * pointers to the fragment pointers. */ int xl_encap(struct xl_softc *sc, struct xl_chain *c, struct mbuf *m_head) { int error, frag, total_len; u_int32_t status; bus_dmamap_t map; map = sc->sc_tx_sparemap; reload: error = bus_dmamap_load_mbuf(sc->sc_dmat, map, m_head, BUS_DMA_NOWAIT); if (error && error != EFBIG) { m_freem(m_head); return (1); } /* * Start packing the mbufs in this chain into * the fragment pointers. Stop when we run out * of fragments or hit the end of the mbuf chain. */ for (frag = 0, total_len = 0; frag < map->dm_nsegs; frag++) { if (frag == XL_MAXFRAGS) break; total_len += map->dm_segs[frag].ds_len; c->xl_ptr->xl_frag[frag].xl_addr = htole32(map->dm_segs[frag].ds_addr); c->xl_ptr->xl_frag[frag].xl_len = htole32(map->dm_segs[frag].ds_len); } /* * Handle special case: we used up all 63 fragments, * but we have more mbufs left in the chain. Copy the * data into an mbuf cluster. Note that we don't * bother clearing the values in the other fragment * pointers/counters; it wouldn't gain us anything, * and would waste cycles. */ if (error) { struct mbuf *m_new = NULL; MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { m_freem(m_head); return (1); } if (m_head->m_pkthdr.len > MHLEN) { MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { m_freem(m_new); m_freem(m_head); return (1); } } m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, caddr_t)); m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; m_freem(m_head); m_head = m_new; goto reload; } bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize, BUS_DMASYNC_PREWRITE); if (c->map->dm_nsegs != 0) { bus_dmamap_sync(sc->sc_dmat, c->map, 0, c->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, c->map); } c->xl_mbuf = m_head; sc->sc_tx_sparemap = c->map; c->map = map; c->xl_ptr->xl_frag[frag - 1].xl_len |= htole32(XL_LAST_FRAG); c->xl_ptr->xl_status = htole32(total_len); c->xl_ptr->xl_next = 0; if (sc->xl_type == XL_TYPE_905B) { status = XL_TXSTAT_RND_DEFEAT; #ifndef XL905B_TXCSUM_BROKEN if (m_head->m_pkthdr.csum_flags) { if (m_head->m_pkthdr.csum_flags & M_IPV4_CSUM_OUT) status |= XL_TXSTAT_IPCKSUM; if (m_head->m_pkthdr.csum_flags & M_TCP_CSUM_OUT) status |= XL_TXSTAT_TCPCKSUM; if (m_head->m_pkthdr.csum_flags & M_UDP_CSUM_OUT) status |= XL_TXSTAT_UDPCKSUM; } #endif c->xl_ptr->xl_status = htole32(status); } bus_dmamap_sync(sc->sc_dmat, sc->sc_listmap, offsetof(struct xl_list_data, xl_tx_list[0]), sizeof(struct xl_list) * XL_TX_LIST_CNT, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } /* * Main transmit routine. To avoid having to do mbuf copies, we put pointers * to the mbuf data regions directly in the transmit lists. We also save a * copy of the pointers since the transmit list fragment pointers are * physical addresses. */ void xl_start(struct ifnet *ifp) { struct xl_softc *sc; struct mbuf *m_head = NULL; struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx; struct xl_chain *prev_tx; int error; sc = ifp->if_softc; /* * Check for an available queue slot. If there are none, * punt. */ if (sc->xl_cdata.xl_tx_free == NULL) { xl_txeoc(sc); xl_txeof(sc); if (sc->xl_cdata.xl_tx_free == NULL) { ifq_set_oactive(&ifp->if_snd); return; } } start_tx = sc->xl_cdata.xl_tx_free; while (sc->xl_cdata.xl_tx_free != NULL) { m_head = ifq_dequeue(&ifp->if_snd); if (m_head == NULL) break; /* Pick a descriptor off the free list. */ prev_tx = cur_tx; cur_tx = sc->xl_cdata.xl_tx_free; /* Pack the data into the descriptor. */ error = xl_encap(sc, cur_tx, m_head); if (error) { cur_tx = prev_tx; continue; } sc->xl_cdata.xl_tx_free = cur_tx->xl_next; cur_tx->xl_next = NULL; /* Chain it together. */ if (prev != NULL) { prev->xl_next = cur_tx; prev->xl_ptr->xl_next = sc->sc_listmap->dm_segs[0].ds_addr + ((caddr_t)cur_tx->xl_ptr - sc->sc_listkva); } prev = cur_tx; #if NBPFILTER > 0 /* * If there's a BPF listener, bounce a copy of this frame * to him. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, cur_tx->xl_mbuf, BPF_DIRECTION_OUT); #endif } /* * If there are no packets queued, bail. */ if (cur_tx == NULL) return; /* * Place the request for the upload interrupt * in the last descriptor in the chain. This way, if * we're chaining several packets at once, we'll only * get an interrupt once for the whole chain rather than * once for each packet. */ cur_tx->xl_ptr->xl_status |= htole32(XL_TXSTAT_DL_INTR); /* * Queue the packets. If the TX channel is clear, update * the downlist pointer register. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL); xl_wait(sc); if (sc->xl_cdata.xl_tx_head != NULL) { sc->xl_cdata.xl_tx_tail->xl_next = start_tx; sc->xl_cdata.xl_tx_tail->xl_ptr->xl_next = sc->sc_listmap->dm_segs[0].ds_addr + ((caddr_t)start_tx->xl_ptr - sc->sc_listkva); sc->xl_cdata.xl_tx_tail->xl_ptr->xl_status &= htole32(~XL_TXSTAT_DL_INTR); sc->xl_cdata.xl_tx_tail = cur_tx; } else { sc->xl_cdata.xl_tx_head = start_tx; sc->xl_cdata.xl_tx_tail = cur_tx; } if (!CSR_READ_4(sc, XL_DOWNLIST_PTR)) CSR_WRITE_4(sc, XL_DOWNLIST_PTR, sc->sc_listmap->dm_segs[0].ds_addr + ((caddr_t)start_tx->xl_ptr - sc->sc_listkva)); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); XL_SEL_WIN(7); /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; /* * XXX Under certain conditions, usually on slower machines * where interrupts may be dropped, it's possible for the * adapter to chew up all the buffers in the receive ring * and stall, without us being able to do anything about it. * To guard against this, we need to make a pass over the * RX queue to make sure there aren't any packets pending. * Doing it here means we can flush the receive ring at the * same time the chip is DMAing the transmit descriptors we * just gave it. * * 3Com goes to some lengths to emphasize the Parallel Tasking (tm) * nature of their chips in all their marketing literature; * we may as well take advantage of it. :) */ xl_rxeof(sc); } void xl_start_90xB(struct ifnet *ifp) { struct xl_softc *sc; struct mbuf *m_head = NULL; struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx; struct xl_chain *prev_tx; int error, idx; sc = ifp->if_softc; if (ifq_is_oactive(&ifp->if_snd)) return; idx = sc->xl_cdata.xl_tx_prod; start_tx = &sc->xl_cdata.xl_tx_chain[idx]; while (sc->xl_cdata.xl_tx_chain[idx].xl_mbuf == NULL) { if ((XL_TX_LIST_CNT - sc->xl_cdata.xl_tx_cnt) < 3) { ifq_set_oactive(&ifp->if_snd); break; } m_head = ifq_dequeue(&ifp->if_snd); if (m_head == NULL) break; prev_tx = cur_tx; cur_tx = &sc->xl_cdata.xl_tx_chain[idx]; /* Pack the data into the descriptor. */ error = xl_encap(sc, cur_tx, m_head); if (error) { cur_tx = prev_tx; continue; } /* Chain it together. */ if (prev != NULL) prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys); prev = cur_tx; #if NBPFILTER > 0 /* * If there's a BPF listener, bounce a copy of this frame * to him. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, cur_tx->xl_mbuf, BPF_DIRECTION_OUT); #endif XL_INC(idx, XL_TX_LIST_CNT); sc->xl_cdata.xl_tx_cnt++; } /* * If there are no packets queued, bail. */ if (cur_tx == NULL) return; /* * Place the request for the upload interrupt * in the last descriptor in the chain. This way, if * we're chaining several packets at once, we'll only * get an interrupt once for the whole chain rather than * once for each packet. */ cur_tx->xl_ptr->xl_status |= htole32(XL_TXSTAT_DL_INTR); /* Start transmission */ sc->xl_cdata.xl_tx_prod = idx; start_tx->xl_prev->xl_ptr->xl_next = htole32(start_tx->xl_phys); /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; } void xl_init(void *xsc) { struct xl_softc *sc = xsc; struct ifnet *ifp = &sc->sc_arpcom.ac_if; int s, i; struct mii_data *mii = NULL; s = splnet(); /* * Cancel pending I/O and free all RX/TX buffers. */ xl_stop(sc); /* Reset the chip to a known state. */ xl_reset(sc); if (sc->xl_hasmii) mii = &sc->sc_mii; if (mii == NULL) { CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); xl_wait(sc); } CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); xl_wait(sc); DELAY(10000); /* Init our MAC address */ XL_SEL_WIN(2); for (i = 0; i < ETHER_ADDR_LEN; i++) { CSR_WRITE_1(sc, XL_W2_STATION_ADDR_LO + i, sc->sc_arpcom.ac_enaddr[i]); } /* Clear the station mask. */ for (i = 0; i < 3; i++) CSR_WRITE_2(sc, XL_W2_STATION_MASK_LO + (i * 2), 0); #ifdef notdef /* Reset TX and RX. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); xl_wait(sc); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); xl_wait(sc); #endif /* Init circular RX list. */ if (xl_list_rx_init(sc) == ENOBUFS) { printf("%s: initialization failed: no " "memory for rx buffers\n", sc->sc_dev.dv_xname); xl_stop(sc); splx(s); return; } /* Init TX descriptors. */ if (sc->xl_type == XL_TYPE_905B) xl_list_tx_init_90xB(sc); else xl_list_tx_init(sc); /* * Set the TX freethresh value. * Note that this has no effect on 3c905B "cyclone" * cards but is required for 3c900/3c905 "boomerang" * cards in order to enable the download engine. */ CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8); /* Set the TX start threshold for best performance. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_SET_START|sc->xl_tx_thresh); /* * If this is a 3c905B, also set the tx reclaim threshold. * This helps cut down on the number of tx reclaim errors * that could happen on a busy network. The chip multiplies * the register value by 16 to obtain the actual threshold * in bytes, so we divide by 16 when setting the value here. * The existing threshold value can be examined by reading * the register at offset 9 in window 5. */ if (sc->xl_type == XL_TYPE_905B) { CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4)); } /* Program promiscuous mode and multicast filters. */ xl_iff(sc); /* * Load the address of the RX list. We have to * stall the upload engine before we can manipulate * the uplist pointer register, then unstall it when * we're finished. We also have to wait for the * stall command to complete before proceeding. * Note that we have to do this after any RX resets * have completed since the uplist register is cleared * by a reset. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL); xl_wait(sc); CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->sc_listmap->dm_segs[0].ds_addr + offsetof(struct xl_list_data, xl_rx_list[0])); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL); xl_wait(sc); if (sc->xl_type == XL_TYPE_905B) { /* Set polling interval */ CSR_WRITE_1(sc, XL_DOWN_POLL, 64); /* Load the address of the TX list */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL); xl_wait(sc); CSR_WRITE_4(sc, XL_DOWNLIST_PTR, sc->sc_listmap->dm_segs[0].ds_addr + offsetof(struct xl_list_data, xl_tx_list[0])); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); xl_wait(sc); } /* * If the coax transceiver is on, make sure to enable * the DC-DC converter. */ XL_SEL_WIN(3); if (sc->xl_xcvr == XL_XCVR_COAX) CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START); else CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); /* * increase packet size to allow reception of 802.1q or ISL packets. * For the 3c90x chip, set the 'allow large packets' bit in the MAC * control register. For 3c90xB/C chips, use the RX packet size * register. */ if (sc->xl_type == XL_TYPE_905B) CSR_WRITE_2(sc, XL_W3_MAXPKTSIZE, XL_PACKET_SIZE); else { u_int8_t macctl; macctl = CSR_READ_1(sc, XL_W3_MAC_CTRL); macctl |= XL_MACCTRL_ALLOW_LARGE_PACK; CSR_WRITE_1(sc, XL_W3_MAC_CTRL, macctl); } /* Clear out the stats counters. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE); sc->xl_stats_no_timeout = 1; xl_stats_update(sc); sc->xl_stats_no_timeout = 0; XL_SEL_WIN(4); CSR_WRITE_2(sc, XL_W4_NET_DIAG, XL_NETDIAG_UPPER_BYTES_ENABLE); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_ENABLE); /* * Enable interrupts. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|0xFF); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|XL_INTRS); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|XL_INTRS); if (sc->intr_ack) (*sc->intr_ack)(sc); /* Set the RX early threshold */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_THRESH|(XL_PACKET_SIZE >>2)); CSR_WRITE_4(sc, XL_DMACTL, XL_DMACTL_UP_RX_EARLY); /* Enable receiver and transmitter. */ CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); xl_wait(sc); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE); xl_wait(sc); /* Restore state of BMCR */ if (mii != NULL) mii_mediachg(mii); /* Select window 7 for normal operations. */ XL_SEL_WIN(7); ifp->if_flags |= IFF_RUNNING; ifq_clr_oactive(&ifp->if_snd); splx(s); timeout_add_sec(&sc->xl_stsup_tmo, 1); } /* * Set media options. */ int xl_ifmedia_upd(struct ifnet *ifp) { struct xl_softc *sc; struct ifmedia *ifm = NULL; struct mii_data *mii = NULL; sc = ifp->if_softc; if (sc->xl_hasmii) mii = &sc->sc_mii; if (mii == NULL) ifm = &sc->ifmedia; else ifm = &mii->mii_media; switch(IFM_SUBTYPE(ifm->ifm_media)) { case IFM_100_FX: case IFM_10_FL: case IFM_10_2: case IFM_10_5: xl_setmode(sc, ifm->ifm_media); return (0); break; default: break; } if (sc->xl_media & XL_MEDIAOPT_MII || sc->xl_media & XL_MEDIAOPT_BTX || sc->xl_media & XL_MEDIAOPT_BT4) { xl_init(sc); } else { xl_setmode(sc, ifm->ifm_media); } return (0); } /* * Report current media status. */ void xl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct xl_softc *sc; u_int32_t icfg; u_int16_t status = 0; struct mii_data *mii = NULL; sc = ifp->if_softc; if (sc->xl_hasmii != 0) mii = &sc->sc_mii; XL_SEL_WIN(4); status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); XL_SEL_WIN(3); icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG) & XL_ICFG_CONNECTOR_MASK; icfg >>= XL_ICFG_CONNECTOR_BITS; ifmr->ifm_active = IFM_ETHER; ifmr->ifm_status = IFM_AVALID; if ((status & XL_MEDIASTAT_CARRIER) == 0) ifmr->ifm_status |= IFM_ACTIVE; switch(icfg) { case XL_XCVR_10BT: ifmr->ifm_active = IFM_ETHER|IFM_10_T; if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX) ifmr->ifm_active |= IFM_FDX; else ifmr->ifm_active |= IFM_HDX; break; case XL_XCVR_AUI: if (sc->xl_type == XL_TYPE_905B && sc->xl_media == XL_MEDIAOPT_10FL) { ifmr->ifm_active = IFM_ETHER|IFM_10_FL; if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX) ifmr->ifm_active |= IFM_FDX; else ifmr->ifm_active |= IFM_HDX; } else ifmr->ifm_active = IFM_ETHER|IFM_10_5; break; case XL_XCVR_COAX: ifmr->ifm_active = IFM_ETHER|IFM_10_2; break; /* * XXX MII and BTX/AUTO should be separate cases. */ case XL_XCVR_100BTX: case XL_XCVR_AUTO: case XL_XCVR_MII: if (mii != NULL) { mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; } break; case XL_XCVR_100BFX: ifmr->ifm_active = IFM_ETHER|IFM_100_FX; break; default: printf("%s: unknown XCVR type: %d\n", sc->sc_dev.dv_xname, icfg); break; } } int xl_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct xl_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; int s, error = 0; struct mii_data *mii = NULL; s = splnet(); switch(command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; if (!(ifp->if_flags & IFF_RUNNING)) xl_init(sc); break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { if (ifp->if_flags & IFF_RUNNING) error = ENETRESET; else xl_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) xl_stop(sc); } break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: if (sc->xl_hasmii != 0) mii = &sc->sc_mii; if (mii == NULL) error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command); else error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); break; case SIOCGIFRXR: error = if_rxr_ioctl((struct if_rxrinfo *)ifr->ifr_data, NULL, MCLBYTES, &sc->xl_cdata.xl_rx_ring); break; default: error = ether_ioctl(ifp, &sc->sc_arpcom, command, data); } if (error == ENETRESET) { if (ifp->if_flags & IFF_RUNNING) xl_iff(sc); error = 0; } splx(s); return (error); } void xl_watchdog(struct ifnet *ifp) { struct xl_softc *sc; u_int16_t status = 0; sc = ifp->if_softc; ifp->if_oerrors++; XL_SEL_WIN(4); status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); printf("%s: watchdog timeout\n", sc->sc_dev.dv_xname); if (status & XL_MEDIASTAT_CARRIER) printf("%s: no carrier - transceiver cable problem?\n", sc->sc_dev.dv_xname); xl_txeoc(sc); xl_txeof(sc); xl_rxeof(sc); xl_init(sc); if (!ifq_empty(&ifp->if_snd)) (*ifp->if_start)(ifp); } void xl_freetxrx(struct xl_softc *sc) { bus_dmamap_t map; int i; /* * Free data in the RX lists. */ for (i = 0; i < XL_RX_LIST_CNT; i++) { if (sc->xl_cdata.xl_rx_chain[i].map->dm_nsegs != 0) { map = sc->xl_cdata.xl_rx_chain[i].map; bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_dmat, map); } if (sc->xl_cdata.xl_rx_chain[i].xl_mbuf != NULL) { m_freem(sc->xl_cdata.xl_rx_chain[i].xl_mbuf); sc->xl_cdata.xl_rx_chain[i].xl_mbuf = NULL; } } bzero(&sc->xl_ldata->xl_rx_list, sizeof(sc->xl_ldata->xl_rx_list)); /* * Free the TX list buffers. */ for (i = 0; i < XL_TX_LIST_CNT; i++) { if (sc->xl_cdata.xl_tx_chain[i].map->dm_nsegs != 0) { map = sc->xl_cdata.xl_tx_chain[i].map; bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, map); } if (sc->xl_cdata.xl_tx_chain[i].xl_mbuf != NULL) { m_freem(sc->xl_cdata.xl_tx_chain[i].xl_mbuf); sc->xl_cdata.xl_tx_chain[i].xl_mbuf = NULL; } } bzero(&sc->xl_ldata->xl_tx_list, sizeof(sc->xl_ldata->xl_tx_list)); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ void xl_stop(struct xl_softc *sc) { struct ifnet *ifp; /* Stop the stats updater. */ timeout_del(&sc->xl_stsup_tmo); ifp = &sc->sc_arpcom.ac_if; ifp->if_flags &= ~IFF_RUNNING; ifq_clr_oactive(&ifp->if_snd); ifp->if_timer = 0; CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISABLE); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISCARD); xl_wait(sc); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_DISABLE); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); DELAY(800); #ifdef foo CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); xl_wait(sc); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); xl_wait(sc); #endif CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|XL_STAT_INTLATCH); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|0); CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); if (sc->intr_ack) (*sc->intr_ack)(sc); xl_freetxrx(sc); } #ifndef SMALL_KERNEL void xl_wol_power(struct xl_softc *sc) { /* Re-enable RX and call upper layer WOL power routine * if WOL is enabled. */ if ((sc->xl_flags & XL_FLAG_WOL) && sc->wol_power) { CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE); sc->wol_power(sc->wol_power_arg); } } #endif void xl_attach(struct xl_softc *sc) { u_int8_t enaddr[ETHER_ADDR_LEN]; u_int16_t xcvr[2]; struct ifnet *ifp = &sc->sc_arpcom.ac_if; int i; uint64_t media = IFM_ETHER|IFM_100_TX|IFM_FDX; struct ifmedia *ifm; i = splnet(); xl_reset(sc); splx(i); /* * Get station address from the EEPROM. */ if (xl_read_eeprom(sc, (caddr_t)&enaddr, XL_EE_OEM_ADR0, 3, 1)) { printf("\n%s: failed to read station address\n", sc->sc_dev.dv_xname); return; } memcpy(&sc->sc_arpcom.ac_enaddr, enaddr, ETHER_ADDR_LEN); if (bus_dmamem_alloc(sc->sc_dmat, sizeof(struct xl_list_data), PAGE_SIZE, 0, sc->sc_listseg, 1, &sc->sc_listnseg, BUS_DMA_NOWAIT | BUS_DMA_ZERO) != 0) { printf(": can't alloc list mem\n"); return; } if (bus_dmamem_map(sc->sc_dmat, sc->sc_listseg, sc->sc_listnseg, sizeof(struct xl_list_data), &sc->sc_listkva, BUS_DMA_NOWAIT) != 0) { printf(": can't map list mem\n"); return; } if (bus_dmamap_create(sc->sc_dmat, sizeof(struct xl_list_data), 1, sizeof(struct xl_list_data), 0, BUS_DMA_NOWAIT, &sc->sc_listmap) != 0) { printf(": can't alloc list map\n"); return; } if (bus_dmamap_load(sc->sc_dmat, sc->sc_listmap, sc->sc_listkva, sizeof(struct xl_list_data), NULL, BUS_DMA_NOWAIT) != 0) { printf(": can't load list map\n"); return; } sc->xl_ldata = (struct xl_list_data *)sc->sc_listkva; for (i = 0; i < XL_RX_LIST_CNT; i++) { if (bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->xl_cdata.xl_rx_chain[i].map) != 0) { printf(": can't create rx map\n"); return; } } if (bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->sc_rx_sparemap) != 0) { printf(": can't create rx spare map\n"); return; } for (i = 0; i < XL_TX_LIST_CNT; i++) { if (bus_dmamap_create(sc->sc_dmat, MCLBYTES, XL_TX_LIST_CNT - 3, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->xl_cdata.xl_tx_chain[i].map) != 0) { printf(": can't create tx map\n"); return; } } if (bus_dmamap_create(sc->sc_dmat, MCLBYTES, XL_TX_LIST_CNT - 3, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->sc_tx_sparemap) != 0) { printf(": can't create tx spare map\n"); return; } printf(", address %s\n", ether_sprintf(sc->sc_arpcom.ac_enaddr)); if (sc->xl_flags & (XL_FLAG_INVERT_LED_PWR|XL_FLAG_INVERT_MII_PWR)) { u_int16_t n; XL_SEL_WIN(2); n = CSR_READ_2(sc, 12); if (sc->xl_flags & XL_FLAG_INVERT_LED_PWR) n |= 0x0010; if (sc->xl_flags & XL_FLAG_INVERT_MII_PWR) n |= 0x4000; CSR_WRITE_2(sc, 12, n); } /* * Figure out the card type. 3c905B adapters have the * 'supportsNoTxLength' bit set in the capabilities * word in the EEPROM. * Note: my 3c575C cardbus card lies. It returns a value * of 0x1578 for its capabilities word, which is somewhat * nonsensical. Another way to distinguish a 3c90x chip * from a 3c90xB/C chip is to check for the 'supportsLargePackets' * bit. This will only be set for 3c90x boomerage chips. */ xl_read_eeprom(sc, (caddr_t)&sc->xl_caps, XL_EE_CAPS, 1, 0); if (sc->xl_caps & XL_CAPS_NO_TXLENGTH || !(sc->xl_caps & XL_CAPS_LARGE_PKTS)) sc->xl_type = XL_TYPE_905B; else sc->xl_type = XL_TYPE_90X; /* Set the TX start threshold for best performance. */ sc->xl_tx_thresh = XL_MIN_FRAMELEN; timeout_set(&sc->xl_stsup_tmo, xl_stats_update, sc); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = xl_ioctl; if (sc->xl_type == XL_TYPE_905B) ifp->if_start = xl_start_90xB; else ifp->if_start = xl_start; ifp->if_watchdog = xl_watchdog; ifp->if_baudrate = 10000000; ifq_set_maxlen(&ifp->if_snd, XL_TX_LIST_CNT - 1); memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ); ifp->if_capabilities = IFCAP_VLAN_MTU; #ifndef XL905B_TXCSUM_BROKEN ifp->if_capabilities |= IFCAP_CSUM_IPv4|IFCAP_CSUM_TCPv4| IFCAP_CSUM_UDPv4; #endif XL_SEL_WIN(3); sc->xl_media = CSR_READ_2(sc, XL_W3_MEDIA_OPT); xl_read_eeprom(sc, (char *)&xcvr, XL_EE_ICFG_0, 2, 0); sc->xl_xcvr = xcvr[0] | xcvr[1] << 16; sc->xl_xcvr &= XL_ICFG_CONNECTOR_MASK; sc->xl_xcvr >>= XL_ICFG_CONNECTOR_BITS; xl_mediacheck(sc); if (sc->xl_media & XL_MEDIAOPT_MII || sc->xl_media & XL_MEDIAOPT_BTX || sc->xl_media & XL_MEDIAOPT_BT4) { ifmedia_init(&sc->sc_mii.mii_media, 0, xl_ifmedia_upd, xl_ifmedia_sts); sc->xl_hasmii = 1; sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = xl_miibus_readreg; sc->sc_mii.mii_writereg = xl_miibus_writereg; sc->sc_mii.mii_statchg = xl_miibus_statchg; xl_setcfg(sc); mii_attach((struct device *)sc, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); } else { ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } ifm = &sc->sc_mii.mii_media; } else { ifmedia_init(&sc->ifmedia, 0, xl_ifmedia_upd, xl_ifmedia_sts); sc->xl_hasmii = 0; ifm = &sc->ifmedia; } /* * Sanity check. If the user has selected "auto" and this isn't * a 10/100 card of some kind, we need to force the transceiver * type to something sane. */ if (sc->xl_xcvr == XL_XCVR_AUTO) xl_choose_xcvr(sc, 0); if (sc->xl_media & XL_MEDIAOPT_BT) { ifmedia_add(ifm, IFM_ETHER|IFM_10_T, 0, NULL); ifmedia_add(ifm, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) ifmedia_add(ifm, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); } if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) { /* * Check for a 10baseFL board in disguise. */ if (sc->xl_type == XL_TYPE_905B && sc->xl_media == XL_MEDIAOPT_10FL) { ifmedia_add(ifm, IFM_ETHER|IFM_10_FL, 0, NULL); ifmedia_add(ifm, IFM_ETHER|IFM_10_FL|IFM_HDX, 0, NULL); if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) ifmedia_add(ifm, IFM_ETHER|IFM_10_FL|IFM_FDX, 0, NULL); } else { ifmedia_add(ifm, IFM_ETHER|IFM_10_5, 0, NULL); } } if (sc->xl_media & XL_MEDIAOPT_BNC) { ifmedia_add(ifm, IFM_ETHER|IFM_10_2, 0, NULL); } if (sc->xl_media & XL_MEDIAOPT_BFX) { ifp->if_baudrate = 100000000; ifmedia_add(ifm, IFM_ETHER|IFM_100_FX, 0, NULL); } /* Choose a default media. */ switch(sc->xl_xcvr) { case XL_XCVR_10BT: media = IFM_ETHER|IFM_10_T; xl_setmode(sc, media); break; case XL_XCVR_AUI: if (sc->xl_type == XL_TYPE_905B && sc->xl_media == XL_MEDIAOPT_10FL) { media = IFM_ETHER|IFM_10_FL; xl_setmode(sc, media); } else { media = IFM_ETHER|IFM_10_5; xl_setmode(sc, media); } break; case XL_XCVR_COAX: media = IFM_ETHER|IFM_10_2; xl_setmode(sc, media); break; case XL_XCVR_AUTO: case XL_XCVR_100BTX: case XL_XCVR_MII: /* Chosen by miibus */ break; case XL_XCVR_100BFX: media = IFM_ETHER|IFM_100_FX; xl_setmode(sc, media); break; default: printf("%s: unknown XCVR type: %d\n", sc->sc_dev.dv_xname, sc->xl_xcvr); /* * This will probably be wrong, but it prevents * the ifmedia code from panicking. */ media = IFM_ETHER | IFM_10_T; break; } if (sc->xl_hasmii == 0) ifmedia_set(&sc->ifmedia, media); if (sc->xl_flags & XL_FLAG_NO_XCVR_PWR) { XL_SEL_WIN(0); CSR_WRITE_2(sc, XL_W0_MFG_ID, XL_NO_XCVR_PWR_MAGICBITS); } #ifndef SMALL_KERNEL /* Check availability of WOL. */ if ((sc->xl_caps & XL_CAPS_PWRMGMT) != 0) { ifp->if_capabilities |= IFCAP_WOL; ifp->if_wol = xl_wol; xl_wol(ifp, 0); } #endif /* * Call MI attach routines. */ if_attach(ifp); ether_ifattach(ifp); } int xl_detach(struct xl_softc *sc) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; extern void xl_freetxrx(struct xl_softc *); /* Unhook our tick handler. */ timeout_del(&sc->xl_stsup_tmo); xl_freetxrx(sc); /* Detach all PHYs */ if (sc->xl_hasmii) mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); /* Delete all remaining media. */ ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY); ether_ifdetach(ifp); if_detach(ifp); return (0); } #ifndef SMALL_KERNEL int xl_wol(struct ifnet *ifp, int enable) { struct xl_softc *sc = ifp->if_softc; XL_SEL_WIN(7); if (enable) { if (!(ifp->if_flags & IFF_RUNNING)) xl_init(sc); CSR_WRITE_2(sc, XL_W7_BM_PME, XL_BM_PME_MAGIC); sc->xl_flags |= XL_FLAG_WOL; } else { CSR_WRITE_2(sc, XL_W7_BM_PME, 0); sc->xl_flags &= ~XL_FLAG_WOL; } return (0); } #endif struct cfdriver xl_cd = { 0, "xl", DV_IFNET };