/* $OpenBSD: essreg.h,v 1.3 2001/01/29 06:27:59 mickey Exp $ */ /* $NetBSD: essreg.h,v 1.12 1999/06/18 20:25:23 augustss Exp $ */ /* * Copyright 1997 * Digital Equipment Corporation. All rights reserved. * * This software is furnished under license and may be used and * copied only in accordance with the following terms and conditions. * Subject to these conditions, you may download, copy, install, * use, modify and distribute this software in source and/or binary * form. No title or ownership is transferred hereby. * * 1) Any source code used, modified or distributed must reproduce * and retain this copyright notice and list of conditions as * they appear in the source file. * * 2) No right is granted to use any trade name, trademark, or logo of * Digital Equipment Corporation. Neither the "Digital Equipment * Corporation" name nor any trademark or logo of Digital Equipment * Corporation may be used to endorse or promote products derived * from this software without the prior written permission of * Digital Equipment Corporation. * * 3) This software is provided "AS-IS" and any express or implied * warranties, including but not limited to, any implied warranties * of merchantability, fitness for a particular purpose, or * non-infringement are disclaimed. In no event shall DIGITAL be * liable for any damages whatsoever, and in particular, DIGITAL * shall not be liable for special, indirect, consequential, or * incidental damages or damages for lost profits, loss of * revenue or loss of use, whether such damages arise in contract, * negligence, tort, under statute, in equity, at law or otherwise, * even if advised of the possibility of such damage. */ /* ** @(#) $RCSfile: essreg.h,v $ $Revision: 1.3 $ (SHARK) $Date: 2001/01/29 06:27:59 $ ** **++ ** ** essreg.h ** ** FACILITY: ** ** DIGITAL Network Appliance Reference Design (DNARD) ** ** MODULE DESCRIPTION: ** ** This module contains the constant definitions for the device ** registers on the ESS Technologies 1888/1887/888 sound chip. ** ** AUTHORS: ** ** Blair Fidler Software Engineering Australia ** Gold Coast, Australia. ** ** CREATION DATE: ** ** March 10, 1997. ** ** MODIFICATION HISTORY: ** **-- */ /* * DSP commands. This unit handles MIDI and audio capabilities. * The DSP can be reset, data/commands can be read or written to it, * and it can generate interrupts. Interrupts are generated for MIDI * input or DMA completion. They seem to have neglected the fact * that it would be nice to have a MIDI transmission complete interrupt. * Worse, the DMA engine is half-duplex. This means you need to do * (timed) programmed I/O to be able to record and play simulataneously. */ #define ESS_ACMD_DAC8WRITE 0x10 /* direct-mode 8-bit DAC write */ #define ESS_ACMD_DAC16WRITE 0x11 /* direct-mode 16-bit DAC write */ #define ESS_ACMD_DMA8OUT 0x14 /* 8-bit linear DMA output */ #define ESS_ACMD_DMA16OUT 0x15 /* 16-bit linear DMA output */ #define ESS_ACMD_AUTODMA8OUT 0x1C /* auto-init 8-bit linear DMA output */ #define ESS_ACMD_AUTODMA16OUT 0x1D /* auto-init 16-bit linear DMA output */ #define ESS_ACMD_ADC8READ 0x20 /* direct-mode 8-bit ADC read */ #define ESS_ACMD_ADC16READ 0x21 /* direct-mode 16-bit ADC read */ #define ESS_ACMD_DMA8IN 0x24 /* 8-bit linear DMA input */ #define ESS_ACMD_DMA16IN 0x25 /* 16-bit linear DMA input */ #define ESS_ACMD_AUTODMA8IN 0x2C /* auto-init 8-bit linear DMA input */ #define ESS_ACMD_AUTODMA16IN 0x2D /* auto-init 16-bit linear DMA input */ #define ESS_ACMD_SETTIMECONST1 0x40 /* set time constant (1MHz base) */ #define ESS_ACMD_SETTIMECONST15 0x41 /* set time constant (1.5MHz base) */ #define ESS_ACMD_SETFILTER 0x42 /* set filter clock independently */ #define ESS_ACMD_BLOCKSIZE 0x48 /* set blk size for high speed xfer */ #define ESS_ACMD_DMA4OUT 0x74 /* 4-bit ADPCM DMA output */ #define ESS_ACMD_DMA4OUTREF 0x75 /* 4-bit ADPCM DMA output with ref */ #define ESS_ACMD_DMA2_6OUT 0x76 /* 2.6-bit ADPCM DMA output */ #define ESS_ACMD_DMA2_6OUTREF 0x77 /* 2.6-bit ADPCM DMA output with ref */ #define ESS_ACMD_DMA2OUT 0x7A /* 2-bit ADPCM DMA output */ #define ESS_ACMD_DMA2OUTREF 0x7B /* 2-bit ADPCM DMA output with ref */ #define ESS_ACMD_SILENCEOUT 0x80 /* output a block of silence */ #define ESS_ACMD_START_AUTO_OUT 0x90 /* start auto-init 8-bit DMA output */ #define ESS_ACMD_START_OUT 0x91 /* start 8-bit DMA output */ #define ESS_ACMD_START_AUTO_IN 0x98 /* start auto-init 8-bit DMA input */ #define ESS_ACMD_START_IN 0x99 /* start 8-bit DMA input */ #define ESS_XCMD_SAMPLE_RATE 0xA1 /* sample rate for Audio1 channel */ #define ESS_XCMD_FILTER_CLOCK 0xA2 /* filter clock for Audio1 channel*/ #define ESS_XCMD_XFER_COUNTLO 0xA4 /* */ #define ESS_XCMD_XFER_COUNTHI 0xA5 /* */ #define ESS_XCMD_AUDIO_CTRL 0xA8 /* */ #define ESS_AUDIO_CTRL_MONITOR 0x08 /* 0=disable/1=enable */ #define ESS_AUDIO_CTRL_MONO 0x02 /* 0=disable/1=enable */ #define ESS_AUDIO_CTRL_STEREO 0x01 /* 0=disable/1=enable */ #define ESS_XCMD_PREAMP_CTRL 0xA9 /* */ #define ESS_PREAMP_CTRL_ENABLE 0x04 #define ESS_XCMD_IRQ_CTRL 0xB1 /* legacy audio interrupt control */ #define ESS_IRQ_CTRL_INTRA 0x00 #define ESS_IRQ_CTRL_INTRB 0x04 #define ESS_IRQ_CTRL_INTRC 0x08 #define ESS_IRQ_CTRL_INTRD 0x0C #define ESS_IRQ_CTRL_MASK 0x10 #define ESS_IRQ_CTRL_EXT 0x40 #define ESS_XCMD_DRQ_CTRL 0xB2 /* audio DRQ control */ #define ESS_DRQ_CTRL_DRQA 0x04 #define ESS_DRQ_CTRL_DRQB 0x08 #define ESS_DRQ_CTRL_DRQC 0x0C #define ESS_DRQ_CTRL_PU 0x10 #define ESS_DRQ_CTRL_EXT 0x40 #define ESS_XCMD_VOLIN_CTRL 0xB4 /* stereo input volume control */ #define ESS_1788_XCMD_AUDIO_CTRL0 0xB6 #define ESS_CTRL0_SIGNED 0x00 #define ESS_CTRL0_UNSIGNED 0x80 #define ESS_XCMD_AUDIO1_CTRL1 0xB7 /* */ #define ESS_AUDIO1_CTRL1_FIFO_CONNECT 0x80 /* 1=connected */ #define ESS_AUDIO1_CTRL1_FIFO_MONO 0x40 /* 0=stereo/1=mono */ #define ESS_AUDIO1_CTRL1_FIFO_SIGNED 0x20 /* 0=unsigned/1=signed */ #define ESS_AUDIO1_CTRL1_FIFO_STEREO 0x08 /* 0=mono/1=stereo */ #define ESS_AUDIO1_CTRL1_FIFO_SIZE 0x04 /* 0=8-bit/1=16-bit */ #define ESS_XCMD_AUDIO1_CTRL2 0xB8 /* */ #define ESS_AUDIO1_CTRL2_FIFO_ENABLE 0x01 /* 0=disable/1=enable */ #define ESS_AUDIO1_CTRL2_DMA_READ 0x02 /* 0=DMA write/1=DMA read */ #define ESS_AUDIO1_CTRL2_AUTO_INIT 0x04 #define ESS_AUDIO1_CTRL2_ADC_ENABLE 0x08 /* 0=DAC mode/1=ADC mode */ #define ESS_XCMD_DEMAND_CTRL 0xB9 /* */ #define ESS_DEMAND_CTRL_SINGLE 0x00 /* 1-byte transfers */ #define ESS_DEMAND_CTRL_DEMAND_2 0x01 /* 2-byte transfers */ #define ESS_DEMAND_CTRL_DEMAND_4 0x02 /* 4-byte transfers */ #define ESS_ACMD_ENABLE_EXT 0xC6 /* enable ESS extension commands */ #define ESS_ACMD_DISABLE_EXT 0xC7 /* enable ESS extension commands */ #define ESS_ACMD_PAUSE_DMA 0xD0 /* pause DMA */ #define ESS_ACMD_ENABLE_SPKR 0xD1 /* enable Audio1 DAC input to mixer */ #define ESS_ACMD_DISABLE_SPKR 0xD3 /* disable Audio1 DAC input to mixer */ #define ESS_ACMD_CONT_DMA 0xD4 /* continue paused DMA */ #define ESS_ACMD_SPKR_STATUS 0xD8 /* return Audio1 DAC status: */ #define ESS_SPKR_OFF 0x00 #define ESS_SPKR_ON 0xFF #define ESS_ACMD_VERSION 0xE1 /* get version number */ #define ESS_ACMD_LEGACY_ID 0xE7 /* get legacy ES688/ES1688 ID bytes */ #define ESS_MINRATE 4000 #define ESS_MAXRATE 44100 /* * Macros to detect valid hardware configuration data. */ #define ESS_BASE_VALID(base) ((base) == 0x220 || (base) == 0x230 || (base) == 0x240 || (base) == 0x250) #define ESS_IRQ1_VALID(irq) ((irq) == 5 || (irq) == 7 || (irq) == 9 || (irq) == 10) #define ESS_IRQ2_VALID(irq) ((irq) == 15) #define ESS_IRQ12_VALID(irq) ((irq) == 5 || (irq) == 7 || (irq) == 9 || (irq) == 10 || (irq) == 15) #define ESS_DRQ1_VALID(chan) ((chan) == 0 || (chan) == 1 || (chan) == 3) #define ESS_DRQ2_VALID(chan) ((chan) == 0 || (chan) == 1 || (chan) == 3 || (chan) == 5) #define ESS_USE_AUDIO1(model) (((model) == ESS_1788) || ((model) == ESS_1868) || ((model) ==ESS_1878) || ((model) == ESS_1869) || ((model) == ESS_1879)) /* * Macros to manipulate gain values */ #define ESS_4BIT_GAIN(x) ((x) & 0xf0) #define ESS_3BIT_GAIN(x) (((x) & 0xe0) >> 1) #define ESS_STEREO_GAIN(l, r) ((l) | ((r) >> 4)) #define ESS_MONO_GAIN(x) ((x) >> 4) #ifdef ESS_AMODE_LOW /* * Registers used to configure ESS chip via Read Key Sequence */ #define ESS_CONFIG_KEY_BASE 0x229 #define ESS_CONFIG_KEY_PORTS 3 #else /* * Registers used to configure ESS chip via System Control Register (SCR) */ #define ESS_SCR_ACCESS_BASE 0xF9 #define ESS_SCR_ACCESS_PORTS 3 #define ESS_SCR_LOCK 0 #define ESS_SCR_UNLOCK 2 #define ESS_SCR_BASE 0xE0 #define ESS_SCR_PORTS 2 #define ESS_SCR_INDEX 0 #define ESS_SCR_DATA 1 /* * Bit definitions for SCR */ #define ESS_SCR_AUDIO_ENABLE 0x04 #define ESS_SCR_AUDIO_220 0x00 #define ESS_SCR_AUDIO_230 0x01 #define ESS_SCR_AUDIO_240 0x02 #define ESS_SCR_AUDIO_250 0x03 #endif /*****************************************************************************/ /* DSP Timeout Definitions */ /*****************************************************************************/ #define ESS_READ_TIMEOUT 5000 /* number of times to try a read, 5ms*/ #define ESS_WRITE_TIMEOUT 5000 /* number of times to try a write, 5ms */ #define ESS_NPORT 16 #define ESS_DSP_RESET 0x06 #define ESS_RESET_EXT 0x03 /* reset and use second DMA */ #define ESS_MAGIC 0xAA /* response to successful reset */ #define ESS_DSP_READ 0x0A #define ESS_DSP_WRITE 0x0C #define ESS_CLEAR_INTR 0x0E #define ESS_DSP_RW_STATUS 0x0C #define ESS_DSP_WRITE_BUSY 0x80 #define ESS_DSP_READ_READY 0x40 #define ESS_DSP_READ_FULL 0x20 /* FIFO full */ #define ESS_DSP_READ_EMPTY 0x10 /* FIFO empty */ #define ESS_DSP_READ_HALF 0x08 /* FIFO half-empty */ #define ESS_DSP_READ_IRQ 0x04 /* IRQ generated */ #define ESS_DSP_READ_HALF_IRQ 0x02 /* " from half-empty flag change */ #define ESS_DSP_READ_OFLOW 0x01 /* " from DMA counter overflow */ #define ESS_DSP_READ_ANYIRQ (ESS_DSP_READ_IRQ | \ ESS_DSP_READ_HALF_IRQ | \ ESS_DSP_READ_OFLOW) #define ESS_MIX_REG_SELECT 0x04 #define ESS_MIX_REG_DATA 0x05 #define ESS_MIX_RESET 0x00 /* mixer reset port and value */ /* * ESS Mixer registers */ #define ESS_MREG_VOLUME_VOICE 0x14 #define ESS_MREG_VOLUME_MIC 0x1A #define ESS_MREG_ADC_SOURCE 0x1C #define ESS_SOURCE_MIC 0x00 #define ESS_SOURCE_CD 0x02 #define ESS_SOURCE_LINE 0x06 #define ESS_SOURCE_MIXER 0x07 #define ESS_MREG_VOLUME_MASTER 0x32 #define ESS_MREG_VOLUME_SYNTH 0x36 #define ESS_MREG_VOLUME_CD 0x38 #define ESS_MREG_VOLUME_AUXB 0x3A #define ESS_MREG_VOLUME_PCSPKR 0x3C #define ESS_MREG_VOLUME_LINE 0x3E #define ESS_MREG_VOLUME_LEFT 0x60 #define ESS_MREG_VOLUME_RIGHT 0x62 #define ESS_VOLUME_MUTE 0x40 #define ESS_MREG_VOLUME_CTRL 0x64 #define ESS_MREG_SAMPLE_RATE 0x70 /* sample rate for Audio2 channel */ #define ESS_MREG_FILTER_CLOCK 0x72 /* filter clock for Audio2 channel */ #define ESS_MREG_XFER_COUNTLO 0x74 /* low-byte of DMA transfer size */ #define ESS_MREG_XFER_COUNTHI 0x76 /* high-byte of DMA transfer size */ #define ESS_MREG_AUDIO2_CTRL1 0x78 /* control register 1 for Audio2: */ #define ESS_AUDIO2_CTRL1_SINGLE 0x00 #define ESS_AUDIO2_CTRL1_DEMAND_2 0x40 #define ESS_AUDIO2_CTRL1_DEMAND_4 0x80 #define ESS_AUDIO2_CTRL1_DEMAND_8 0xC0 #define ESS_AUDIO2_CTRL1_XFER_SIZE 0x20 /* 0=8-bit/1=16-bit */ #define ESS_AUDIO2_CTRL1_AUTO_INIT 0x10 #define ESS_AUDIO2_CTRL1_FIFO_ENABLE 0x02 /* 0=disable/1=enable */ #define ESS_AUDIO2_CTRL1_DAC_ENABLE 0x01 /* 0=disable/1=enable */ #define ESS_MREG_AUDIO2_CTRL2 0x7A /* control register 2 for Audio2: */ #define ESS_AUDIO2_CTRL2_FIFO_SIZE 0x01 /* 0=8-bit/1=16-bit */ #define ESS_AUDIO2_CTRL2_CHANNELS 0x02 /* 0=mono/1=stereo */ #define ESS_AUDIO2_CTRL2_FIFO_SIGNED 0x04 /* 0=unsigned/1=signed */ #define ESS_AUDIO2_CTRL2_DMA_ENABLE 0x20 /* 0=disable/1=enable */ #define ESS_AUDIO2_CTRL2_IRQ2_ENABLE 0x40 #define ESS_AUDIO2_CTRL2_IRQ_LATCH 0x80 #define ESS_MREG_AUDIO2_CTRL3 0x7D #define ESS_AUDIO2_CTRL3_DRQA 0x00 #define ESS_AUDIO2_CTRL3_DRQB 0x01 #define ESS_AUDIO2_CTRL3_DRQC 0x02 #define ESS_AUDIO2_CTRL3_DRQD 0x03 #define ESS_AUDIO2_CTRL3_DRQ_PD 0x04 #define ESS_MREG_INTR_ST 0x7F #define ESS_IS_SELECT_IRQ 0x01 #define ESS_IS_ES1888 0x00 #define ESS_IS_INTRA 0x02 #define ESS_IS_INTRB 0x04 #define ESS_IS_INTRC 0x06 #define ESS_IS_INTRD 0x08 #define ESS_IS_INTRE 0x0A