#	$OpenBSD: files.isa,v 1.111 2011/06/29 17:48:22 tedu Exp $
#	$NetBSD: files.isa,v 1.21 1996/05/16 03:45:55 mycroft Exp $
#
# Config file and device description for machine-independent ISA code.
# Included by ports that need it.  Requires that the SCSI files be
# defined first.

# ports should specify appropriate major numbers for the following
# devices:
#	wd

device	isa {[port = -1], [size = 0],
	     [iomem = -1], [iosiz = 0],
	     [irq = -1], [drq = -1],
	     [drq2 = -1]}
attach	isa at isabus
file	dev/isa/isa.c			isa needs-flag

#
# ISA DMA capability, if it exists on this ISA bus
#
define	isa_dma
device	isadma
attach	isadma at isa: isa_dma
file	dev/isa/isadma.c		isadma needs-flag

#
# 8250/16[45]50-based multi-port serial boards
#

define	commulti {[slave = -1]}

# AST 4-port board
device	ast: commulti
attach	ast at isa
file	dev/isa/ast.c			ast

# BOCA 8-port board
device	boca: commulti
attach	boca at isa
file	dev/isa/boca.c			boca

device	addcom: commulti
attach	addcom at isa with addcom_isa
file	dev/isa/addcom_isa.c		addcom

# IBM RT PC 4-port board
device	rtfps: commulti
attach	rtfps at isa
file	dev/isa/rtfps.c			rtfps

# Hostess 4-port board
device	hsq: commulti
attach	hsq at isa
file	dev/isa/hsq.c			hsq

#
# Serial and parallel drivers
#

# 8250/16[45]50-based "com" ports
attach	com at isa with com_isa
file	dev/isa/com_isa.c		com_isa

attach	com at commulti with com_commulti
file	dev/isa/com_commulti.c		com_commulti

# Cyclades Cyclom multiport serial cards
attach	cy at isa with cy_isa
file	dev/isa/cy_isa.c		cy_isa

# ISA PC keyboard controller
attach	pckbc at isa with pckbc_isa
file	dev/isa/pckbc_isa.c		pckbc_isa	needs-flag

# Generic ISA VGA
attach	vga at isa with vga_isa
file	dev/isa/vga_isa.c		vga_isa

# Generic PC graphics adapter (MGA, CGA, ...)
device	pcdisplay: wsemuldisplaydev, pcdisplayops
attach	pcdisplay at isa
file	dev/isa/pcdisplay.c	pcdisplay	needs-flag

#
# SCSI host adapters
#

# BusLogic BT-74x EISA family (XXX; should be EISA.  it's special)
attach	bha at isa with bha_isa: isa_dma
file	dev/isa/bha_isa.c		bha_isa

# Adaptec AIC-6[32]60 ICs
attach	aic at isa with aic_isa: isa_dma
file	dev/isa/aic_isa.c		aic_isa

# Adaptec AHA-154x family
device	aha: scsi, isa_dma
attach	aha at isa with aha_isa
file	dev/isa/aha.c			aha needs-flag

# Seagate ST0[12] ICs
device	sea: scsi
attach	sea at isa
file	dev/isa/seagate.c		sea

# UltraStor UHA-[13]4f boards
# device declaration in sys/conf/files
attach	uha at isa with uha_isa: isa_dma
file	dev/isa/uha_isa.c		uha_isa

# Western Digital WD7000 and Future Domain TMC-7000 boards
device	wds: scsi, isa_dma
attach	wds at isa
file	dev/isa/wds.c			wds

# OPTi 82C929 chipset setup code
define	opti
file	dev/isa/opti.c			opti

#
# Other ISA disk controllers
#

# ISA "wd" (ESDI/IDE/etc.) controllers, ATAPI bus
attach	wdc at isa with wdc_isa: isa_dma
file	dev/isa/wdc_isa.c		wdc_isa

#
# ISA networking drivers
#

# DEC EtherWORKS III (LEMAC-based: DE203, DE204, DE205) cards
attach	lc at isa with lc_isa
file	dev/isa/if_lc_isa.c		lc_isa

# Novell NE1000, NE2000, and clones
# Must be before the WD/SMC probe which it is hurt by.
attach	ne at isa with ne_isa: rtl80x9
file	dev/isa/if_ne_isa.c		ne_isa

# WD/SMC 80x3 family, SMC Elite Ultra [8216], SMC EtherEZ
# MUST be second: probe is hurting some NE2k clones but otherwise kind,
# and registers are clobbered by other drivers' probes
device	we: ether, ifnet, dp8390nic, ifmedia
attach	we at isa with we_isa
file	dev/isa/if_we.c			we & (we_isa | we_isapnp) needs-flag

# 3Com common probe code
define	elink
file	dev/isa/elink.c			elink

# 3Com 3C503
device	ec: ether, ifnet, dp8390nic, ifmedia
attach	ec at isa
file	dev/isa/if_ec.c			ec

# 3Com 3C505
device	eg: ether, ifnet
attach	eg at isa
file	dev/isa/if_eg.c			eg

# 3Com 3C501
device	el: ether, ifnet
attach	el at isa
file	dev/isa/if_el.c			el

# 3Com 3C509 Ethernet controller
attach	ep at isa with ep_isa: elink
file	dev/isa/if_ep_isa.c		ep_isa

# Intel i82586-based boards
# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507)
attach	ie at isa with ie_isa: elink
file	dev/isa/if_ie.c			ie_isa

# Intel i82595-based boards.
# (Intel EtherExpress PRO/100)
device	iy: ether, ifnet
attach	iy at isa
file	dev/isa/if_iy.c			iy

# Intel EtherExpress PRO/10
device	ex: ether, ifnet
attach	ex at isa
file	dev/isa/if_ex.c			ex needs-flag

# AMD am7990 (Lance) -based boards
# (BICC Isolan, NE2100, DEPCA)
# device declaration in sys/conf/files
attach	le at isa with le_isa
file	dev/isa/if_le.c			le_isa | le_pci
file	dev/isa/if_le_isa.c		le_isa

# SMC91Cxx Ethernet Controllers
attach	sm at isa with sm_isa
file	dev/isa/if_sm_isa.c		sm_isa

#
# ISA Sound hardware
#

# MPU401 MIDI UART compatibles
define	mpu
file	dev/isa/mpu401.c		mpu | midi

# MPU401 generic MIDI UART for dumb MPUs like Yamaha SW60XG
device	mpu: midibus
attach	mpu at isa with mpu_isa
file	dev/isa/mpu_isa.c		mpu & midi

# the SoundBlaster DSP, or close likenesses; used by other drivers
define	sbdsp {}
file	dev/isa/sbdsp.c			sbdsp

# SoundBlaster family
device	sb: audio, isa_dma, sbdsp, mulaw, opti, auconv, mpu, midibus
file	dev/isa/sb.c			sb needs-flag

attach	sb at isa with sb_isa
file	dev/isa/sb_isa.c		sb & (sb_isa | sb_isapnp) needs-flag

# Soundcards based on Sierra's Aria chipset.
# Such as the Prometheus Aria 16 or the Diamond
# sonic sound.
device	aria: audio, mulaw
attach	aria at isa
file	dev/isa/aria.c			aria needs-flag

# ProAudio Spectrum
device	pas: audio, isa_dma, sbdsp, mulaw, auconv
attach	pas at isa
file	dev/isa/pas.c			pas needs-flag

# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
define	ad1848
file	dev/isa/ad1848.c		ad1848

# ICS2101 mixer chip support; used by other drivers
define	ics2101
file	dev/isa/ics2101.c		ics2101


# Microsoft Windows Sound System
device	wss: audio, isa_dma, ad1848, auconv
file	dev/isa/wss.c			wss needs-flag

attach	wss at isa with wss_isa
file	dev/isa/wss_isa.c		wss & (wss_isa | wss_isapnp) needs-flag

# ESS Technology ES1887/ES888/ES1888
device	ess {} : audio, isa_dma, mulaw, auconv, midibus
file	dev/isa/ess.c			ess needs-flag

# Gravis UltraSound & UltraSound MAX.
# Use the "flags" keyword in a config file to specify an extra DMA
# channel for full-duplex operation.

device	gus: audio, isa_dma, ics2101, ad1848, mulaw, auconv
file	dev/isa/gus.c			gus needs-flag

attach	gus at isa with gus_isa
file	dev/isa/gus_isa.c		gus & (gus_isa | gus_isapnp) needs-flag

# Sound Forte RadioLink SF16-FMR FM Radio Card
device sfr: radiobus, tc921x, pt2254a
attach sfr at isa
file	dev/isa/sf16fmr.c		sfr

# Sound Forte RadioLink SF16-FMR2 FM Radio Card
device sf2r: radiobus, tea5757, pt2254a
attach sf2r at isa
file	dev/isa/sf16fmr2.c		sf2r

# Aztech/PackardBell FM Radio Card
device az: radiobus, lm700x
attach az at isa
file	dev/isa/aztech.c		az

# AIMS Lab Radiotrack & compatible
device	rt: radiobus, lm700x
file	dev/isa/radiotrack.c		rt & (rt_isa | rt_isapnp)

attach	rt at isa with rt_isa
file	dev/isa/rt_isa.c		rt_isa

# AIMS Lab Radiotrack II FM Radio Card
device	rtii: radiobus, tea5757
attach	rtii at isa
file	dev/isa/radiotrack2.c		rtii

# PC PPI + TIMER 1 (speaker interface)
device	pcppi {}
attach	pcppi at isa
file	dev/isa/pcppi.c	pcppi	needs-flag
device	spkr
attach	spkr at pcppi
file	dev/isa/spkr.c			spkr	needs-flag

# 8255A-based PC parallel ports
attach	lpt at isa with lpt_isa
file	dev/isa/lpt_isa.c		lpt_isa needs-flag

# Winbond LPC Super I/O
device	wbsio {}
attach	wbsio at isa
file	dev/isa/wbsio.c			wbsio

# SMSC SCH311x Super I/O
device	schsio {}
attach	schsio at isa
file	dev/isa/sch311x.c		schsio

# National Semiconductor LM78/79/81 and compatible hardware monitors
attach	lm at isa with lm_isa
attach	lm at wbsio with lm_wbsio
file	dev/isa/lm78_isa.c		lm_isa | lm_wbsio

# Fintek (Feature Integration Technology) F71805F hardware monitor subfunction
device	fins
attach	fins at isa
file	dev/isa/fins.c			fins

# NSC PC87366 Super IO / monitor chip
device	nsclpcsio: gpiobus
attach	nsclpcsio at isa with nsclpcsio_isa
file	dev/isa/nsclpcsio_isa.c		nsclpcsio_isa

# National Semiconductor Geode SC1100 Super I/O
device	gscsio: i2cbus
attach	gscsio at isa
file	dev/isa/gscsio.c		gscsio

# ITE IT8705F, IT8712F, IT8716F, IT8718F, IT8726F and SiS SiS950 hardware
# monitors and watchdog timers
device	it
attach	it at isa
file	dev/isa/it.c			it

# VIA VT1211 LPC Super I/O
device	viasio
attach	viasio at isa
file	dev/isa/viasio.c		viasio

# ABIT uGuru
device	uguru
attach	uguru at isa
file	dev/isa/uguru.c			uguru

# ThinkPad Active Protection System accelerometer
device	aps
attach	aps at isa
file	dev/isa/aps.c			aps

# ISA I/O mapped as GPIO
device	isagpio: gpiobus
attach	isagpio at isa
file	dev/isa/isagpio.c		isagpio

#
# PCMCIA PCIC (i82365SL and compatibles):
#
#device	pcicmaster {[irq = -1], [iomem = -1], [iosiz = 0]}
#attach	pcicmaster at isa
#device	pcic: pcmciabus
#attach	pcic at pcicmaster
#file	dev/isa/pcmcia_pcic.c		pcic | pcicmaster

#file	dev/isa/pcmcia_isa.c		pcmcia