/* $OpenBSD: gusreg.h,v 1.2 1996/03/08 16:42:56 niklas Exp $ */ /* $NetBSD: gusreg.h,v 1.3 1996/02/05 02:22:10 jtc Exp $ */ /*- * Copyright (c) 1996 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Ken Hornstein and John Kohl. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Register definitions of Gravis UltraSound card */ /* * MIDI control registers. Essentially a MC6850 UART. Note the MC6850's * "feature" of having read-only and write-only registers combined on one * address. */ #define GUS_MIDI_CONTROL 0x100 #define GUS_MIDI_STATUS 0x100 #define GUS_MIDI_READ 0x101 #define GUS_MIDI_WRITE 0x101 /* * Joystick interface - note this is an absolute address, NOT an offset from * the GUS base address. */ #define GUS_JOYSTICK 0x201 /* * GUS control registers */ #define GUS_MIX_CONTROL 0x000 #define GUS_IRQ_STATUS 0x006 #define GUS_TIMER_CONTROL 0x008 #define GUS_TIMER_DATA 0x009 #define GUS_REG_CONTROL 0x00f /* rev 3.4 or later only: select reg at 2XB */ #define GUS_REG_NORMAL 0x00 /* IRQ/DMA as usual */ #define GUS_REG_IRQCTL 0x05 /* IRQ ctl: write 0 to clear IRQ state */ #define GUS_REG_JUMPER 0x06 /* jumper control: */ #define GUS_JUMPER_MIDIEN 0x02 /* bit: enable MIDI ports */ #define GUS_JUMPER_JOYEN 0x04 /* bit: enable joystick ports */ #define GUS_IRQ_CONTROL 0x00b #define GUS_DMA_CONTROL 0x00b #define GUS_IRQCTL_CONTROL 0x00b #define GUS_JUMPER_CONTROL 0x00b #define GUS_VOICE_SELECT 0x102 #define GUS_REG_SELECT 0x103 #define GUS_DATA_LOW 0x104 #define GUS_DATA_HIGH 0x105 #define GUS_DRAM_DATA 0x107 /* * GUS on-board global registers */ #define GUSREG_DMA_CONTROL 0x41 #define GUSREG_DMA_START 0x42 #define GUSREG_DRAM_ADDR_LOW 0x43 #define GUSREG_DRAM_ADDR_HIGH 0x44 #define GUSREG_TIMER_CONTROL 0x45 #define GUSREG_TIMER1_COUNT 0x46 /* count-up, then interrupt, 80usec */ #define GUSREG_TIMER2_COUNT 0x47 /* count-up, then interrupt, 320usec */ #define GUSREG_SAMPLE_FREQ 0x48 /* 9878400/(16*(rate+2)) */ #define GUSREG_SAMPLE_CONTROL 0x49 #define GUSREG_JOYSTICK_TRIM 0x4b #define GUSREG_RESET 0x4c /* * GUS voice specific registers (some of which aren't!). Add 0x80 to these * registers for reads */ #define GUSREG_READ 0x80 #define GUSREG_VOICE_CNTL 0x00 #define GUSREG_FREQ_CONTROL 0x01 #define GUSREG_START_ADDR_HIGH 0x02 #define GUSREG_START_ADDR_LOW 0x03 #define GUSREG_END_ADDR_HIGH 0x04 #define GUSREG_END_ADDR_LOW 0x05 #define GUSREG_VOLUME_RATE 0x06 #define GUSREG_START_VOLUME 0x07 #define GUSREG_END_VOLUME 0x08 #define GUSREG_CUR_VOLUME 0x09 #define GUSREG_CUR_ADDR_HIGH 0x0a #define GUSREG_CUR_ADDR_LOW 0x0b #define GUSREG_PAN_POS 0x0c #define GUSREG_VOLUME_CONTROL 0x0d #define GUSREG_ACTIVE_VOICES 0x0e /* voice-independent:set voice count */ #define GUSREG_IRQ_STATUS 0x8f /* voice-independent */ #define GUS_PAN_FULL_LEFT 0x0 #define GUS_PAN_FULL_RIGHT 0xf /* * GUS Bitmasks for reset register */ #define GUSMASK_MASTER_RESET 0x01 #define GUSMASK_DAC_ENABLE 0x02 #define GUSMASK_IRQ_ENABLE 0x04 /* * Bitmasks for IRQ status port */ #define GUSMASK_IRQ_MIDIXMIT 0x01 /* MIDI transmit IRQ */ #define GUSMASK_IRQ_MIDIRCVR 0x02 /* MIDI received IRQ */ #define GUSMASK_IRQ_TIMER1 0x04 /* timer 1 IRQ */ #define GUSMASK_IRQ_TIMER2 0x08 /* timer 2 IRQ */ #define GUSMASK_IRQ_RESERVED 0x10 /* Reserved (set to 0) */ #define GUSMASK_IRQ_VOICE 0x20 /* Wavetable IRQ (any voice) */ #define GUSMASK_IRQ_VOLUME 0x40 /* Volume ramp IRQ (any voc) */ #define GUSMASK_IRQ_DMATC 0x80 /* DMA transfer complete */ /* * Bitmasks for sampling control register */ #define GUSMASK_SAMPLE_START 0x01 /* start sampling */ #define GUSMASK_SAMPLE_STEREO 0x02 /* mono or stereo */ #define GUSMASK_SAMPLE_DATA16 0x04 /* 16-bit DMA channel */ #define GUSMASK_SAMPLE_IRQ 0x20 /* enable IRQ */ #define GUSMASK_SAMPLE_DMATC 0x40 /* DMA transfer complete */ #define GUSMASK_SAMPLE_INVBIT 0x80 /* invert MSbit */ /* * Bitmasks for IRQ status register (different than IRQ status _port_ - the * register is internal to the GUS) */ #define GUSMASK_WIRQ_VOLUME 0x40 /* Flag for volume interrupt */ #define GUSMASK_WIRQ_VOICE 0x80 /* Flag for voice interrupt */ #define GUSMASK_WIRQ_VOICEMASK 0x1f /* Bits holding voice # */ /* * GUS bitmasks for built-in mixer control (separate from the ICS or CS chips) */ #define GUSMASK_LINE_IN 0x01 /* 0=enable */ #define GUSMASK_LINE_OUT 0x02 /* 0=enable */ #define GUSMASK_MIC_IN 0x04 /* 1=enable */ #define GUSMASK_LATCHES 0x08 /* enable IRQ latches */ #define GUSMASK_COMBINE 0x10 /* combine Ch 1 IRQ & Ch 2 (MIDI) */ #define GUSMASK_MIDI_LOOPBACK 0x20 /* MIDI loopback */ #define GUSMASK_CONTROL_SEL 0x40 /* Select control register */ #define GUSMASK_BOTH_RQ 0x40 /* Combine both RQ lines */ /* * GUS bitmaks for DMA control */ #define GUSMASK_DMA_ENABLE 0x01 /* Enable DMA transfer */ #define GUSMASK_DMA_READ 0x02 /* 1=read, 0=write */ #define GUSMASK_DMA_WRITE 0x00 /* for consistancy */ #define GUSMASK_DMA_WIDTH 0x04 /* Data transfer width */ #define GUSMASK_DMA_R0 0x00 /* Various DMA speeds */ #define GUSMASK_DMA_R1 0x08 #define GUSMASK_DMA_R2 0x10 #define GUSMASK_DMA_R3 0x18 #define GUSMASK_DMA_IRQ 0x20 /* Enable DMA to IRQ */ #define GUSMASK_DMA_IRQPEND 0x40 /* DMA IRQ pending */ #define GUSMASK_DMA_DATA_SIZE 0x40 /* 0=8 bit, 1=16 bit */ #define GUSMASK_DMA_INVBIT 0x80 /* invert high bit */ /* * GUS bitmasks for voice control */ #define GUSMASK_VOICE_STOPPED 0x01 /* The voice is stopped */ #define GUSMASK_STOP_VOICE 0x02 /* Force voice to stop */ #define GUSMASK_DATA_SIZE16 0x04 /* 1=16 bit, 0=8 bit data */ #define GUSMASK_LOOP_ENABLE 0x08 /* Loop voice at end */ #define GUSMASK_VOICE_BIDIR 0x10 /* Bi-directional looping */ #define GUSMASK_VOICE_IRQ 0x20 /* Enable the voice IRQ */ #define GUSMASK_INCR_DIR 0x40 /* Direction of address incr */ #define GUSMASK_VOICE_IRQPEND 0x80 /* Pending IRQ for voice */ /* * Bitmasks for volume control */ #define GUSMASK_VOLUME_STOPPED 0x01 /* Volume ramping stopped */ #define GUSMASK_STOP_VOLUME 0x02 /* Manually stop volume */ #define GUSMASK_VOICE_ROLL 0x04 /* Roll over/low water condition */ #define GUSMASK_VOLUME_LOOP 0x08 /* Volume ramp looping */ #define GUSMASK_VOLUME_BIDIR 0x10 /* Bi-dir volume looping */ #define GUSMASK_VOLUME_IRQ 0x20 /* IRQ on end of volume ramp */ #define GUSMASK_VOLUME_DIR 0x40 /* Direction of volume ramp */ #define GUSMASK_VOLUME_IRQPEND 0x80 /* Pending volume IRQ */ #define MIDI_RESET 0x03 /* * ICS Mixer registers */ #define GUS_MIXER_SELECT 0x506 /* read=board rev, wr=mixer */ #define GUS_BOARD_REV 0x506 #define GUS_MIXER_DATA 0x106 /* data for mixer control */ #define GUSMIX_CHAN_MIC ICSMIX_CHAN_0 #define GUSMIX_CHAN_LINE ICSMIX_CHAN_1 #define GUSMIX_CHAN_CD ICSMIX_CHAN_2 #define GUSMIX_CHAN_DAC ICSMIX_CHAN_3 #define GUSMIX_CHAN_MASTER ICSMIX_CHAN_5 /* * Codec/Mixer registers */ /* all these get +4 more in ad1848, sigh. */ #define GUS_MAX_CODEC_BASE 0x108 #define GUS_DAUGHTER_CODEC_BASE 0x52C #define GUS_DAUGHTER_CODEC_BASE2 0x600 #define GUS_DAUGHTER_CODEC_BASE3 0xE7C #define GUS_DAUGHTER_CODEC_BASE4 0xF3C #define GUS_CODEC_SELECT 4 /* base + 0 */ #define GUS_CODEC_DATA 5 /* base + 1 */ #define GUS_CODEC_STATUS 6 /* base + 2 */ #define GUS_CODEC_PIO 7 /* base + 3 */ #define GUS_MAX_CTRL 0x106 #define GUS_MAX_BASEBITS 0xf /* sets middle nibble of 3X6 */ #define GUS_MAX_RECCHAN16 0x10 /* 0=8bit DMA read, 1=16bit DMA read */ #define GUS_MAX_PLAYCHAN16 0x20 /* 0=8bit, 1=16bit */ #define GUS_MAX_CODEC_ENABLE 0x40 /* 0=disable, 1=enable */