/* $OpenBSD: hsq.c,v 1.5 2008/11/22 10:33:33 deraadt Exp $ */ /*- * Copyright (c) 1999 Denis A. Doroshenko. All rights reserved. * * This code is derived from BSD-licensed software written by * Christopher G. Demetriou and Charles Hannum, which was * derived from public-domain software written by Roland McGrath. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Note: this copyright notice is a version of Berkeley-style license * derived from the original by Regents of the University of California. */ /* * This is OpenBSD driver for Hostess 4-channel serial mux -- hsq * ("hsq" stands for "HoStess Quad channel mux"; funny enough). * * Hostess may be the registered trademark of Comtrol Corp. * WARNING! The information that is below about Hostess family * serial cards is not based on any information from Comtrol, * and I DON'T guarantee this information is authentic or right. * For authentic information on Hostess serial cards visit * http://www.comtrol.com * * Hostess mux is a very simple thing -- it's 4/8/16(?) UARTs one * after another, that share one IRQ. Under linux they may be used * with setserial, BSD systems are not so flexible with serial ports, * so i took ast driver and changed it, in the way i think Hostess * muxes should work. It works ifine with my mux (it has ti16c750 * UARTs on it, and current com driver detects them as 550A, so i * changed it a bit, to use the power of 750). * * Hostess cards use scratch register of lead UART to control the mux. * When a byte is written to the register it is meant as mask, which * enables/disables interrupts from 1-8 UARTs by setting 0-7 bits to * 1/0. Let us call this register UER -- UARTs Enable Register. * When a byte is read it is mask of bits for UARTs, that have some * event(s), which are analyzed using that UART's IIR. Let us call * this register UIR -- UARTs Interrrupt Register. * * Note: four higher bits of the UIR are alway 1 for 4-channel mux, * I have no idea what could that mean, it would be better to have * them zeroed. * * Shitty feature: UER's value upon power up is absolutely random, * so that UARTs can work and can not and you don't uderstand what's up... * Thus, we have to set its value to 0x0f to get all four UARTs * interrupting, just after we've attached the mux... * * Use it and share my fun! * -- * Denis A. Doroshenko */ #include #include #include #include #include #include #include #include #include /* * For 8-channel Hostess serial card change: NSLAVES -> 8, UART_MASK -> 0xff */ #define NSLAVES (4) #define UART_MASK (0x0f) #define com_uer (com_scratch) #define com_uir (com_scratch) struct hsq_softc { struct device sc_dev; void *sc_ih; bus_space_tag_t sc_iot; int sc_iobase; void *sc_slaves[NSLAVES]; /* com device unit numbers */ bus_space_handle_t sc_slaveioh[NSLAVES]; }; int hsqprobe(struct device *, void *, void *); void hsqattach(struct device *, struct device *, void *); int hsqintr(void *); int hsqprint(void *, const char *); struct cfattach hsq_ca = { sizeof(struct hsq_softc), hsqprobe, hsqattach }; struct cfdriver hsq_cd = { NULL, "hsq", DV_TTY }; int hsqprobe(parent, self, aux) struct device *parent; void *self; void *aux; { struct isa_attach_args *ia = aux; int iobase = ia->ia_iobase; bus_space_tag_t iot = ia->ia_iot; bus_space_handle_t ioh; int i, rv = 1; /* * Do the normal com probe for the first UART and assume * its presence, and the ability to map the other UARTs, * means there is a multiport board there. * XXX Needs more robustness. */ /* if the first port is in use as console, then it. */ if (iobase == comconsaddr && !comconsattached) goto checkmappings; /* map UART ports (COM_NPORTS == 8) */ if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) { rv = 0; goto out; } rv = comprobe1(iot, ioh); bus_space_unmap(iot, ioh, COM_NPORTS); if (rv == 0) goto out; checkmappings: for (i = 1; i < NSLAVES; i++) { iobase += COM_NPORTS; if (iobase == comconsaddr && !comconsattached) continue; if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) { rv = 0; goto out; } bus_space_unmap(iot, ioh, COM_NPORTS); } out: if (rv) ia->ia_iosize = NSLAVES * COM_NPORTS; return (rv); } int hsqprint(aux, pnp) void *aux; const char *pnp; { struct commulti_attach_args *ca = aux; if (pnp) printf("com at %s", pnp); printf(" slave %d", ca->ca_slave); return (UNCONF); } void hsqattach(parent, self, aux) struct device *parent, *self; void *aux; { struct hsq_softc *sc = (void *)self; struct isa_attach_args *ia = aux; struct commulti_attach_args ca; int i; sc->sc_iot = ia->ia_iot; sc->sc_iobase = ia->ia_iobase; for (i = 0; i < NSLAVES; i++) if (bus_space_map(sc->sc_iot, sc->sc_iobase + i * COM_NPORTS, COM_NPORTS, 0, &sc->sc_slaveioh[i])) panic("hsqattach: couldn't map slave %d", i); printf("\n"); for (i = 0; i < NSLAVES; i++) { ca.ca_slave = i; ca.ca_iot = sc->sc_iot; ca.ca_ioh = sc->sc_slaveioh[i]; ca.ca_iobase = sc->sc_iobase + i * COM_NPORTS; ca.ca_noien = 1; sc->sc_slaves[i] = config_found(self, &ca, hsqprint); } /* allow interrupts from all four UARTs */ bus_space_write_1(sc->sc_iot, sc->sc_slaveioh[0], com_uer, UART_MASK); sc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE, IPL_TTY, hsqintr, sc, sc->sc_dev.dv_xname); } int hsqintr(arg) void *arg; { struct hsq_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; int bits; bits = bus_space_read_1(iot, sc->sc_slaveioh[0], com_uir) & UART_MASK; if ( !bits ) return (0); /* no interrupts pending */ for (;;) { #define TRY(n) \ if ( sc->sc_slaves[n] && bits & (1 << (n)) ) \ comintr(sc->sc_slaves[n]); TRY(0); TRY(1); TRY(2); TRY(3); #undef TRY bits = bus_space_read_1(iot, sc->sc_slaveioh[0], com_uir) & UART_MASK; if ( !bits ) return (1); /* no interrupts pending */ } }