/* $OpenBSD: i82365_isasubr.c,v 1.15 2001/08/17 21:52:16 deraadt Exp $ */ /* $NetBSD: i82365_isasubr.c,v 1.1 1998/06/07 18:28:31 sommerfe Exp $ */ /* * Copyright (c) 1998 Bill Sommerfeld. All rights reserved. * Copyright (c) 1997 Marc Horowitz. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Marc Horowitz. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /***************************************************************************** * Configurable parameters. *****************************************************************************/ /* * Default I/O allocation range. If both are set to non-zero, these * values will be used instead. Otherwise, the code attempts to probe * the bus width. */ #ifndef PCIC_ISA_ALLOC_IOBASE #define PCIC_ISA_ALLOC_IOBASE 0 #endif #ifndef PCIC_ISA_ALLOC_IOSIZE #define PCIC_ISA_ALLOC_IOSIZE 0 #endif int pcic_isa_alloc_iobase = PCIC_ISA_ALLOC_IOBASE; int pcic_isa_alloc_iosize = PCIC_ISA_ALLOC_IOSIZE; /* * I am well aware that some of later irqs below are not for real, but there * is a way to deal with that in the search loop. For beauty's sake I want * this list to be a permutation of 0..15. */ char pcic_isa_intr_list[] = { 3, 4, 14, 9, 5, 12, 10, 11, 15, 13, 7, 1, 6, 2, 0, 8 }; struct pcic_ranges pcic_isa_addr[] = { { 0x340, 0x030 }, { 0x300, 0x030 }, { 0x390, 0x020 }, { 0x400, 0xbff }, { 0, 0 }, /* terminator */ }; /***************************************************************************** * End of configurable parameters. *****************************************************************************/ #ifdef PCICISADEBUG int pcicsubr_debug = 1 /* XXX */ ; #define DPRINTF(arg) if (pcicsubr_debug) printf arg; #else #define DPRINTF(arg) #endif static int pcic_intr_seen; void pcic_isa_bus_width_probe(sc, iot, ioh, base, length) struct pcic_softc *sc; bus_space_tag_t iot; bus_space_handle_t ioh; bus_addr_t base; u_int32_t length; { bus_space_handle_t ioh_high; int i, iobuswidth, tmp1, tmp2; /* * figure out how wide the isa bus is. Do this by checking if the * pcic controller is mirrored 0x400 above where we expect it to be. * * XXX some hardware doesn't seem to grok addresses in 0x400 * range-- apparently missing a bit or more of address lines. * (e.g. CIRRUS_PD672X with Linksys EthernetCard ne2000 clone * in TI TravelMate 5000 -- not clear which is at fault) * * Add a kludge to detect 10 bit wide buses and deal with them, * and also a config file option to override the probe. */ iobuswidth = 12; /* Map i/o space. */ if (bus_space_map(iot, base + 0x400, length, 0, &ioh_high)) { printf("%s: can't map high i/o space\n", sc->dev.dv_xname); return; } for (i = 0; i < PCIC_NSLOTS; i++) { if (sc->handle[i].flags & PCIC_FLAG_SOCKETP) { /* * read the ident flags from the normal space and * from the mirror, and compare them */ bus_space_write_1(iot, ioh, PCIC_REG_INDEX, sc->handle[i].sock + PCIC_IDENT); tmp1 = bus_space_read_1(iot, ioh, PCIC_REG_DATA); bus_space_write_1(iot, ioh_high, PCIC_REG_INDEX, sc->handle[i].sock + PCIC_IDENT); tmp2 = bus_space_read_1(iot, ioh_high, PCIC_REG_DATA); if (tmp1 == tmp2) iobuswidth = 10; } } bus_space_free(iot, ioh_high, length); sc->ranges = pcic_isa_addr; if (iobuswidth == 10) { sc->iobase = 0x000; sc->iosize = 0x400; } else { sc->iobase = 0x0000; sc->iosize = 0x1000; } DPRINTF(("%s: bus_space_alloc range 0x%04lx-0x%04lx (probed)\n", sc->dev.dv_xname, (long) sc->iobase, (long) sc->iobase + sc->iosize)); if (pcic_isa_alloc_iobase && pcic_isa_alloc_iosize) { sc->iobase = pcic_isa_alloc_iobase; sc->iosize = pcic_isa_alloc_iosize; DPRINTF(("%s: bus_space_alloc range 0x%04lx-0x%04lx " "(config override)\n", sc->dev.dv_xname, (long) sc->iobase, (long) sc->iobase + sc->iosize)); } } void * pcic_isa_chip_intr_establish(pch, pf, ipl, fct, arg, xname) pcmcia_chipset_handle_t pch; struct pcmcia_function *pf; int ipl; int (*fct) __P((void *)); void *arg; char *xname; { struct pcic_handle *h = (struct pcic_handle *)pch; struct pcic_softc *sc = (struct pcic_softc *)(h->ph_parent); isa_chipset_tag_t ic = sc->intr_est; int irq, ist, reg; void *ih; if (pf->cfe->flags & PCMCIA_CFE_IRQLEVEL) ist = IST_LEVEL; else if (pf->cfe->flags & PCMCIA_CFE_IRQPULSE) ist = IST_PULSE; else ist = IST_EDGE; irq = pcic_intr_find(sc, ist); if (!irq) return (NULL); h->ih_irq = irq; reg = pcic_read(h, PCIC_INTR); reg &= ~(PCIC_INTR_IRQ_MASK | PCIC_INTR_ENABLE); pcic_write(h, PCIC_INTR, reg | irq); ih = isa_intr_establish(ic, irq, ist, ipl, fct, arg, h->pcmcia->dv_xname); if (!ih) return (NULL); if (xname) { printf("%s: irq %d", xname, irq); if (*xname) printf("\n"); } return (ih); } void pcic_isa_chip_intr_disestablish(pch, ih) pcmcia_chipset_handle_t pch; void *ih; { struct pcic_handle *h = (struct pcic_handle *) pch; struct pcic_softc *sc = (struct pcic_softc *)(h->ph_parent); isa_chipset_tag_t ic = sc->intr_est; int reg; h->ih_irq = 0; isa_intr_disestablish(ic, ih); reg = pcic_read(h, PCIC_INTR); reg &= ~(PCIC_INTR_IRQ_MASK | PCIC_INTR_ENABLE); pcic_write(h, PCIC_INTR, reg); } int pcic_intr_probe(v) void *v; { pcic_intr_seen = 1; return (1); } /* * Try to find a working interrupt, first by searching for a unique * irq that is known to work, verified by tickling the pcic, then * by searching for a shareable irq known to work. If the pcic does * not allow tickling we then fallback to the same strategy but without * tickling just assuming the first usable irq found works. */ int pcic_intr_find(sc, ist) struct pcic_softc *sc; int ist; { struct pcic_handle *ph = &sc->handle[0]; isa_chipset_tag_t ic = sc->intr_est; int i, tickle, check, irq, chosen_irq = 0, csc_touched = 0; void *ih; u_int8_t saved_csc_intr; /* * First time, look for entirely free interrupts, last * time accept shareable ones. */ for (tickle = 1; tickle >= 0; tickle--) { if (tickle) /* * Remember card status change interrupt * configuration. */ saved_csc_intr = pcic_read(ph, PCIC_CSC_INTR); for (check = 2; check; check--) { /* Walk over all possible interrupts. */ for (i = 0; i < 16; i++) { irq = pcic_isa_intr_list[i]; if (((1 << irq) & PCIC_CSC_INTR_IRQ_VALIDMASK) == 0) continue; if (isa_intr_check(ic, irq, ist) < check) continue; if (!tickle) { chosen_irq = irq; goto out; } /* * Prepare for an interrupt tickle. * As this can be called from an * IPL_TTY context (the card status * change interrupt) we need to do * higher. */ ih = isa_intr_establish(ic, irq, ist, IPL_IMP, pcic_intr_probe, 0, NULL); if (ih == NULL) continue; pcic_intr_seen = 0; pcic_write(ph, PCIC_CSC_INTR, (saved_csc_intr & ~PCIC_CSC_INTR_IRQ_MASK) | PCIC_CSC_INTR_CD_ENABLE | (irq << PCIC_CSC_INTR_IRQ_SHIFT)); csc_touched = 1; /* Teehee, you tickle me! ;-) */ pcic_write(ph, PCIC_CARD_DETECT, pcic_read(ph, PCIC_CARD_DETECT) | PCIC_CARD_DETECT_SW_INTR); /* * Delay for 10 ms and then shut the * probe off. That should be plenty * of time for the interrupt to be * handled. */ delay(10000); /* Acknowledge the interrupt. */ pcic_read(ph, PCIC_CSC); isa_intr_disestablish(ic, ih); if (pcic_intr_seen) { chosen_irq = irq; goto out; } } } } out: if (csc_touched) /* Restore card detection bit. */ pcic_write(ph, PCIC_CSC_INTR, saved_csc_intr); return (chosen_irq); }