/* $OpenBSD: if_ex.c,v 1.34 2008/11/22 13:14:35 oga Exp $ */ /* * Copyright (c) 1997, Donald A. Schmidt * Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Intel EtherExpress Pro/10 Ethernet driver * * Revision history: * * 30-Oct-1996: first beta version. Inet and BPF supported, but no multicast. */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif #if NBPFILTER > 0 #include #endif #include #include #include #include #ifdef EX_DEBUG #define Start_End 1 #define Rcvd_Pkts 2 #define Sent_Pkts 4 #define Status 8 static int debug_mask = 0; static int exintr_count = 0; #define DODEBUG(level, action) if (level & debug_mask) action #else #define DODEBUG(level, action) #endif struct ex_softc { struct arpcom arpcom; /* Ethernet common data */ struct ifmedia ifmedia; int iobase; /* I/O base address. */ u_short irq_no; /* IRQ number. */ u_int mem_size; /* Total memory size, in bytes. */ u_int rx_mem_size; /* Rx memory size (by default, first 3/4 of total memory). */ u_int rx_lower_limit, rx_upper_limit; /* Lower and upper limits of receive buffer. */ u_int rx_head; /* Head of receive ring buffer. */ u_int tx_mem_size; /* Tx memory size (by default, last quarter of total memory). */ u_int tx_lower_limit, tx_upper_limit; /* Lower and upper limits of transmit buffer. */ u_int tx_head, tx_tail; /* Head and tail of transmit ring buffer. */ u_int tx_last; /* Pointer to beginning of last frame in the chain. */ bus_space_tag_t sc_iot; /* ISA i/o space tag */ bus_space_handle_t sc_ioh; /* ISA i/o space handle */ void *sc_ih; /* Device interrupt handler */ }; static char irq2eemap[] = { -1, -1, 0, 1, -1, 2, -1, -1, -1, 0, 3, 4, -1, -1, -1, -1 }; static u_char ee2irqmap[] = { 9, 3, 5, 10, 11, 0, 0, 0 }; int ex_probe(struct device *, void *, void *); void ex_attach(struct device *, struct device *, void *); void ex_init(struct ex_softc *); void ex_start(struct ifnet *); void ex_stop(struct ex_softc *); int ex_ioctl(struct ifnet *, u_long, caddr_t); void ex_setmulti(struct ex_softc *); void ex_reset(struct ex_softc *); void ex_watchdog(struct ifnet *); int ex_get_media(struct ex_softc *); int ex_ifmedia_upd(struct ifnet *); void ex_ifmedia_sts(struct ifnet *, struct ifmediareq *); u_short ex_eeprom_read(struct ex_softc *, int); int ex_look_for_card(struct isa_attach_args *, struct ex_softc *sc); int ex_intr(void *); void ex_tx_intr(struct ex_softc *); void ex_rx_intr(struct ex_softc *); struct cfattach ex_ca = { sizeof(struct ex_softc), ex_probe, ex_attach }; struct cfdriver ex_cd = { NULL, "ex", DV_IFNET }; #define CSR_READ_1(sc, off) \ bus_space_read_1((sc)->sc_iot, (sc)->sc_ioh, (off)) #define CSR_READ_2(sc, off) \ bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, (off)) #define CSR_READ_MULTI_2(sc, off, addr, count) \ bus_space_read_multi_2((sc)->sc_iot, (sc)->sc_ioh, (off), \ (u_int16_t *)(addr), (count)) #define CSR_WRITE_1(sc, off, value) \ bus_space_write_1((sc)->sc_iot, (sc)->sc_ioh, (off), (value)) #define CSR_WRITE_2(sc, off, value) \ bus_space_write_2((sc)->sc_iot, (sc)->sc_ioh, (off), (value)) #define CSR_WRITE_MULTI_2(sc, off, addr, count) \ bus_space_write_multi_2((sc)->sc_iot, (sc)->sc_ioh, (off), \ (u_int16_t *)(addr), (count)) int ex_look_for_card(struct isa_attach_args *ia, struct ex_softc *sc) { int count1, count2; /* * Check for the i82595 signature, and check that the round robin * counter actually advances. */ if (((count1 = CSR_READ_1(sc, ID_REG)) & Id_Mask) != Id_Sig) return(0); count2 = CSR_READ_1(sc, ID_REG); count2 = CSR_READ_1(sc, ID_REG); count2 = CSR_READ_1(sc, ID_REG); if ((count2 & Counter_bits) == ((count1 + 0xc0) & Counter_bits)) return(1); else return(0); } int ex_probe(struct device *parent, void *match, void *aux) { struct ex_softc *sc = match; struct isa_attach_args *ia = aux; u_short eaddr_tmp; int tmp; DODEBUG(Start_End, printf("ex_probe: start\n");); if ((ia->ia_iobase >= 0x200) && (ia->ia_iobase <= 0x3a0)) { sc->sc_iot = ia->ia_iot; if(bus_space_map(sc->sc_iot, ia->ia_iobase, EX_IOSIZE, 0, &sc->sc_ioh)) return(0); if (!ex_look_for_card(ia, sc)) { bus_space_unmap(sc->sc_iot, sc->sc_ioh, EX_IOSIZE); return(0); } } else return(0); ia->ia_iosize = EX_IOSIZE; /* * Reset the card. */ CSR_WRITE_1(sc, CMD_REG, Reset_CMD); delay(200); /* * Fill in several fields of the softc structure: * - I/O base address. * - Hardware Ethernet address. * - IRQ number (if not supplied in config file, read it from * EEPROM). */ sc->iobase = ia->ia_iobase; eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Lo); sc->arpcom.ac_enaddr[5] = eaddr_tmp & 0xff; sc->arpcom.ac_enaddr[4] = eaddr_tmp >> 8; eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Mid); sc->arpcom.ac_enaddr[3] = eaddr_tmp & 0xff; sc->arpcom.ac_enaddr[2] = eaddr_tmp >> 8; eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Hi); sc->arpcom.ac_enaddr[1] = eaddr_tmp & 0xff; sc->arpcom.ac_enaddr[0] = eaddr_tmp >> 8; tmp = ex_eeprom_read(sc, EE_IRQ_No) & IRQ_No_Mask; if (ia->ia_irq > 0) { if (ee2irqmap[tmp] != ia->ia_irq) printf("ex: WARING: board's EEPROM is configured for IRQ %d, using %d\n", ee2irqmap[tmp], ia->ia_irq); sc->irq_no = ia->ia_irq; } else { sc->irq_no = ee2irqmap[tmp]; ia->ia_irq = sc->irq_no; } if (sc->irq_no == 0) { printf("ex: invalid IRQ.\n"); return(0); } sc->mem_size = CARD_RAM_SIZE; /* XXX This should be read from the card itself. */ DODEBUG(Start_End, printf("ex_probe: finish\n");); return(1); } void ex_attach(struct device *parent, struct device *self, void *aux) { struct ex_softc *sc = (void *)self; struct isa_attach_args *ia = aux; struct ifnet *ifp = &sc->arpcom.ac_if; struct ifmedia *ifm; int temp; DODEBUG(Start_End, printf("ex_attach: start\n");); ifp->if_softc = sc; bcopy(self->dv_xname, ifp->if_xname, IFNAMSIZ); ifp->if_start = ex_start; ifp->if_ioctl = ex_ioctl; ifp->if_watchdog = ex_watchdog; ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; IFQ_SET_READY(&ifp->if_snd); ifmedia_init(&sc->ifmedia, 0, ex_ifmedia_upd, ex_ifmedia_sts); temp = ex_eeprom_read(sc, EE_W5); if (temp & EE_W5_PORT_TPE) ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); if (temp & EE_W5_PORT_BNC) ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL); if (temp & EE_W5_PORT_AUI) ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->ifmedia, ex_get_media(sc)); ifm = &sc->ifmedia; ifm->ifm_media = ifm->ifm_cur->ifm_media; ex_ifmedia_upd(ifp); if_attach(ifp); ether_ifattach(ifp); printf(": address %s\n", ether_sprintf(sc->arpcom.ac_enaddr)); sc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE, IPL_NET, ex_intr, sc, self->dv_xname); ex_init(sc); DODEBUG(Start_End, printf("ex_attach: finish\n");); } void ex_init(struct ex_softc *sc) { struct ifnet *ifp = &sc->arpcom.ac_if; int s, i; unsigned short temp_reg; DODEBUG(Start_End, printf("ex_init: start\n");); s = splnet(); sc->arpcom.ac_if.if_timer = 0; /* * Load the ethernet address into the card. */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); temp_reg = CSR_READ_1(sc, EEPROM_REG); if (temp_reg & Trnoff_Enable) CSR_WRITE_1(sc, EEPROM_REG, temp_reg & ~Trnoff_Enable); for (i = 0; i < ETHER_ADDR_LEN; i++) CSR_WRITE_1(sc, I_ADDR_REG0 + i, sc->arpcom.ac_enaddr[i]); /* * - Setup transmit chaining and discard bad received frames. * - Match broadcast. * - Clear test mode. * - Set receiving mode. * - Set IRQ number. */ CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) | Tx_Chn_Int_Md | Tx_Chn_ErStp | Disc_Bad_Fr); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | No_SA_Ins | RX_CRC_InMem); CSR_WRITE_1(sc, REG3, (CSR_READ_1(sc, REG3) & 0x3f)); CSR_WRITE_1(sc, CMD_REG, Bank1_Sel); CSR_WRITE_1(sc, INT_NO_REG, (CSR_READ_1(sc, INT_NO_REG) & 0xf8) | irq2eemap[sc->irq_no]); /* * Divide the available memory in the card into rcv and xmt buffers. * By default, I use the first 3/4 of the memory for the rcv buffer, * and the remaining 1/4 of the memory for the xmt buffer. */ sc->rx_mem_size = sc->mem_size * 3 / 4; sc->tx_mem_size = sc->mem_size - sc->rx_mem_size; sc->rx_lower_limit = 0x0000; sc->rx_upper_limit = sc->rx_mem_size - 2; sc->tx_lower_limit = sc->rx_mem_size; sc->tx_upper_limit = sc->mem_size - 2; CSR_WRITE_1(sc, RCV_LOWER_LIMIT_REG, sc->rx_lower_limit >> 8); CSR_WRITE_1(sc, RCV_UPPER_LIMIT_REG, sc->rx_upper_limit >> 8); CSR_WRITE_1(sc, XMT_LOWER_LIMIT_REG, sc->tx_lower_limit >> 8); CSR_WRITE_1(sc, XMT_UPPER_LIMIT_REG, sc->tx_upper_limit >> 8); /* * Enable receive and transmit interrupts, and clear any pending int. */ CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) | TriST_INT); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); CSR_WRITE_1(sc, MASK_REG, All_Int & ~(Rx_Int | Tx_Int)); CSR_WRITE_1(sc, STATUS_REG, All_Int); /* * Initialize receive and transmit ring buffers. */ CSR_WRITE_2(sc, RCV_BAR, sc->rx_lower_limit); sc->rx_head = sc->rx_lower_limit; CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_upper_limit | 0xfe); CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit); sc->tx_head = sc->tx_tail = sc->tx_lower_limit; ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE init\n");); ex_setmulti(sc); /* * Final reset of the board, and enable operation. */ CSR_WRITE_1(sc, CMD_REG, Sel_Reset_CMD); delay(2); CSR_WRITE_1(sc, CMD_REG, Rcv_Enable_CMD); ex_start(ifp); splx(s); DODEBUG(Start_End, printf("ex_init: finish\n");); } void ex_start(struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; int i, len, data_len, avail, dest, next; unsigned char tmp16[2]; struct mbuf *opkt; struct mbuf *m; DODEBUG(Start_End, printf("ex_start: start\n");); /* * Main loop: send outgoing packets to network card until there are no * more packets left, or the card cannot accept any more yet. */ while (!(ifp->if_flags & IFF_OACTIVE)) { IFQ_POLL(&ifp->if_snd, opkt); if (opkt == NULL) break; /* * Ensure there is enough free transmit buffer space for this * packet, including its header. Note: the header cannot wrap * around the end of the transmit buffer and must be kept * together, so we allow space for twice the length of the * header, just in case. */ for (len = 0, m = opkt; m != NULL; m = m->m_next) len += m->m_len; data_len = len; DODEBUG(Sent_Pkts, printf("1. Sending packet with %d data bytes. ", data_len);); if (len & 1) len += XMT_HEADER_LEN + 1; else len += XMT_HEADER_LEN; if ((i = sc->tx_tail - sc->tx_head) >= 0) avail = sc->tx_mem_size - i; else avail = -i; DODEBUG(Sent_Pkts, printf("i=%d, avail=%d\n", i, avail);); if (avail >= len + XMT_HEADER_LEN) { IFQ_DEQUEUE(&ifp->if_snd, opkt); #ifdef EX_PSA_INTR /* * Disable rx and tx interrupts, to avoid corruption of * the host address register by interrupt service * routines. XXX Is this necessary with splnet() * enabled? */ CSR_WRITE_2(sc, MASK_REG, All_Int); #endif /* * Compute the start and end addresses of this frame * in the tx buffer. */ dest = sc->tx_tail; next = dest + len; if (next > sc->tx_upper_limit) { if ((sc->tx_upper_limit + 2 - sc->tx_tail) <= XMT_HEADER_LEN) { dest = sc->tx_lower_limit; next = dest + len; } else next = sc->tx_lower_limit + next - sc->tx_upper_limit - 2; } /* Build the packet frame in the card's ring buffer. */ DODEBUG(Sent_Pkts, printf("2. dest=%d, next=%d. ", dest, next);); CSR_WRITE_2(sc, HOST_ADDR_REG, dest); CSR_WRITE_2(sc, IO_PORT_REG, Transmit_CMD); CSR_WRITE_2(sc, IO_PORT_REG, 0); CSR_WRITE_2(sc, IO_PORT_REG, next); CSR_WRITE_2(sc, IO_PORT_REG, data_len); /* * Output the packet data to the card. Ensure all * transfers are 16-bit wide, even if individual mbufs * have odd length. */ for (m = opkt, i = 0; m != NULL; m = m->m_next) { DODEBUG(Sent_Pkts, printf("[%d]", m->m_len);); if (i) { tmp16[1] = *(mtod(m, caddr_t)); CSR_WRITE_MULTI_2(sc, IO_PORT_REG, tmp16, 1); } CSR_WRITE_MULTI_2(sc, IO_PORT_REG, mtod(m, caddr_t) + i, (m->m_len - i) / 2); if ((i = (m->m_len - i) & 1)) tmp16[0] = *(mtod(m, caddr_t) + m->m_len - 1); } if (i) CSR_WRITE_MULTI_2(sc, IO_PORT_REG, tmp16, 1); /* * If there were other frames chained, update the * chain in the last one. */ if (sc->tx_head != sc->tx_tail) { if (sc->tx_tail != dest) { CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_last + XMT_Chain_Point); CSR_WRITE_2(sc, IO_PORT_REG, dest); } CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count); i = CSR_READ_2(sc, IO_PORT_REG); CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count); CSR_WRITE_2(sc, IO_PORT_REG, i | Ch_bit); } /* * Resume normal operation of the card: * -Make a dummy read to flush the DRAM write pipeline. * -Enable receive and transmit interrupts. * -Send Transmit or Resume_XMT command, as appropriate. */ CSR_READ_2(sc, IO_PORT_REG); #ifdef EX_PSA_INTR CSR_WRITE_2(sc, MASK_REG, All_Int & ~(Rx_Int | Tx_Int)); #endif if (sc->tx_head == sc->tx_tail) { CSR_WRITE_2(sc, XMT_BAR, dest); CSR_WRITE_1(sc, CMD_REG, Transmit_CMD); sc->tx_head = dest; DODEBUG(Sent_Pkts, printf("Transmit\n");); } else { CSR_WRITE_1(sc, CMD_REG, Resume_XMT_List_CMD); DODEBUG(Sent_Pkts, printf("Resume\n");); } sc->tx_last = dest; sc->tx_tail = next; #if NBPFILTER > 0 if (ifp->if_bpf != NULL) bpf_mtap(ifp->if_bpf, opkt, BPF_DIRECTION_OUT); #endif ifp->if_timer = 2; ifp->if_opackets++; m_freem(opkt); } else { ifp->if_flags |= IFF_OACTIVE; DODEBUG(Status, printf("OACTIVE start\n");); } } DODEBUG(Start_End, printf("ex_start: finish\n");); } void ex_stop(struct ex_softc *sc) { DODEBUG(Start_End, printf("ex_stop: start\n");); /* * Disable card operation: * - Disable the interrupt line. * - Flush transmission and disable reception. * - Mask and clear all interrupts. * - Reset the 82595. */ CSR_WRITE_1(sc, CMD_REG, Bank1_Sel); CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) & ~TriST_INT); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); CSR_WRITE_1(sc, CMD_REG, Rcv_Stop); sc->tx_head = sc->tx_tail = sc->tx_lower_limit; sc->tx_last = 0; /* XXX I think these two lines are not necessary, because ex_init will always be called again to reinit the interface. */ CSR_WRITE_1(sc, MASK_REG, All_Int); CSR_WRITE_1(sc, STATUS_REG, All_Int); CSR_WRITE_1(sc, CMD_REG, Reset_CMD); delay(200); DODEBUG(Start_End, printf("ex_stop: finish\n");); } int ex_intr(void *arg) { struct ex_softc *sc = arg; struct ifnet *ifp = &sc->arpcom.ac_if; int int_status, send_pkts; int handled; DODEBUG(Start_End, printf("exintr: start\n");); #ifdef EX_DEBUG if (++exintr_count != 1) printf("WARNING: nested interrupt (%d). Mail the author.\n", exintr_count); #endif send_pkts = 0; while ((int_status = CSR_READ_1(sc, STATUS_REG)) & (Tx_Int | Rx_Int)) { if (int_status & Rx_Int) { CSR_WRITE_1(sc, STATUS_REG, Rx_Int); handled = 1; ex_rx_intr(sc); } else if (int_status & Tx_Int) { CSR_WRITE_1(sc, STATUS_REG, Tx_Int); handled = 1; ex_tx_intr(sc); send_pkts = 1; } else handled = 0; } /* * If any packet has been transmitted, and there are queued packets to * be sent, attempt to send more packets to the network card. */ if (send_pkts && IFQ_IS_EMPTY(&ifp->if_snd) == 0) ex_start(ifp); #ifdef EX_DEBUG exintr_count--; #endif DODEBUG(Start_End, printf("exintr: finish\n");); return handled; } void ex_tx_intr(struct ex_softc *sc) { struct ifnet *ifp = &sc->arpcom.ac_if; int tx_status; DODEBUG(Start_End, printf("ex_tx_intr: start\n");); /* * - Cancel the watchdog. * For all packets transmitted since last transmit interrupt: * - Advance chain pointer to next queued packet. * - Update statistics. */ ifp->if_timer = 0; while (sc->tx_head != sc->tx_tail) { CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_head); if (!CSR_READ_2(sc, IO_PORT_REG) & Done_bit) break; tx_status = CSR_READ_2(sc, IO_PORT_REG); sc->tx_head = CSR_READ_2(sc, IO_PORT_REG); if (tx_status & TX_OK_bit) ifp->if_opackets++; else ifp->if_oerrors++; ifp->if_collisions += tx_status & No_Collisions_bits; } /* The card should be ready to accept more packets now. */ ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE tx_intr\n");); DODEBUG(Start_End, printf("ex_tx_intr: finish\n");); } void ex_rx_intr(struct ex_softc *sc) { struct ifnet *ifp = &sc->arpcom.ac_if; int rx_status, pkt_len, QQQ; struct mbuf *m, *ipkt; DODEBUG(Start_End, printf("ex_rx_intr: start\n");); /* * For all packets received since last receive interrupt: * - If packet ok, read it into a new mbuf and queue it to interface, * updating statistics. * - If packet bad, just discard it, and update statistics. * Finally, advance receive stop limit in card's memory to new location. */ CSR_WRITE_2(sc, HOST_ADDR_REG, sc->rx_head); while (CSR_READ_2(sc, IO_PORT_REG) == RCV_Done) { rx_status = CSR_READ_2(sc, IO_PORT_REG); sc->rx_head = CSR_READ_2(sc, IO_PORT_REG); QQQ = pkt_len = CSR_READ_2(sc, IO_PORT_REG); if (rx_status & RCV_OK_bit) { MGETHDR(m, M_DONTWAIT, MT_DATA); ipkt = m; if (ipkt == NULL) ifp->if_iqdrops++; else { ipkt->m_pkthdr.rcvif = ifp; ipkt->m_pkthdr.len = pkt_len; ipkt->m_len = MHLEN; while (pkt_len > 0) { if (pkt_len >= MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) m->m_len = MCLBYTES; else { m_freem(ipkt); ifp->if_iqdrops++; goto rx_another; } } m->m_len = min(m->m_len, pkt_len); /* * NOTE: I'm assuming that all mbufs * allocated are of even length, except * for the last one in an odd-length * packet. */ CSR_READ_MULTI_2(sc, IO_PORT_REG, mtod(m, caddr_t), m->m_len / 2); if (m->m_len & 1) *(mtod(m, caddr_t) + m->m_len - 1) = CSR_READ_1(sc, IO_PORT_REG); pkt_len -= m->m_len; if (pkt_len > 0) { MGET(m->m_next, M_DONTWAIT, MT_DATA); if (m->m_next == NULL) { m_freem(ipkt); ifp->if_iqdrops++; goto rx_another; } m = m->m_next; m->m_len = MLEN; } } #ifdef EX_DEBUG if (debug_mask & Rcvd_Pkts) { if ((eh->ether_dhost[5] != 0xff) || (eh->ether_dhost[0] != 0xff)) { printf("Receive packet with %d data bytes: %6D -> ", QQQ, eh->ether_shost, ":"); printf("%6D\n", eh->ether_dhost, ":"); } /* QQQ */ } #endif #if NBPFILTER > 0 if (ifp->if_bpf != NULL) bpf_mtap(ifp->if_bpf, ipkt, BPF_DIRECTION_IN); #endif ether_input_mbuf(ifp, ipkt); ifp->if_ipackets++; } } else ifp->if_ierrors++; CSR_WRITE_2(sc, HOST_ADDR_REG, sc->rx_head); rx_another: ; } if (sc->rx_head < sc->rx_lower_limit + 2) CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_upper_limit); else CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_head - 2); DODEBUG(Start_End, printf("ex_rx_intr: finish\n");); } int ex_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct ifaddr *ifa = (struct ifaddr *) data; struct ex_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; int s, error = 0; DODEBUG(Start_End, printf("ex_ioctl: start ");); s = splnet(); switch(cmd) { case SIOCSIFADDR: DODEBUG(Start_End, printf("SIOCSIFADDR");); ifp->if_flags |= IFF_UP; if (!(ifp->if_flags & IFF_RUNNING)) ex_init(sc); #ifdef INET if (ifa->ifa_addr->sa_family == AF_INET) arp_ifinit(&sc->arpcom, ifa); #endif break; case SIOCSIFFLAGS: DODEBUG(Start_End, printf("SIOCSIFFLAGS");); if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) { ifp->if_flags &= ~IFF_RUNNING; ex_stop(sc); } else ex_init(sc); break; case SIOCSIFMTU: DODEBUG(Start_End, printf("SIOCSIFMTU");); if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU) error = EINVAL; else if (ifp->if_mtu != ifr->ifr_mtu) ifp->if_mtu = ifr->ifr_mtu; break; case SIOCADDMULTI: case SIOCDELMULTI: error = (cmd == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->arpcom) : ether_delmulti(ifr, &sc->arpcom); if (error == ENETRESET) { if (ifp->if_flags & IFF_RUNNING) ex_init(sc); error = 0; } break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, cmd); break; default: error = ether_ioctl(ifp, &sc->arpcom, cmd, data); } splx(s); DODEBUG(Start_End, printf("\nex_ioctl: finish\n");); return(error); } void ex_setmulti(struct ex_softc *sc) { struct arpcom *ac = &sc->arpcom; struct ifnet *ifp = &sc->arpcom.ac_if; struct ether_multi *enm; struct ether_multistep step; uint16_t *addr; int count, timeout, status; ifp->if_flags &= ~IFF_ALLMULTI; count = 0; ETHER_FIRST_MULTI(step, ac, enm); while (enm != NULL) { count++; ETHER_NEXT_MULTI(step, enm); } if (count > 63 || ac->ac_multirangecnt > 0) ifp->if_flags |= IFF_ALLMULTI; if (ifp->if_flags & IFF_PROMISC || ifp->if_flags & IFF_ALLMULTI) { /* * Interface is in promiscuous mode, there are too many * multicast addresses for the card to handle or there * is a multicast range */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Promisc_Mode); CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); } else if (ifp->if_flags & IFF_MULTICAST && count > 0) { /* Program multicast addresses plus our MAC address * into the filter */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Multi_IA); CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); /* Borrow space from TX buffer; this should be safe * as this is only called from ex_init */ CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_lower_limit); CSR_WRITE_2(sc, IO_PORT_REG, MC_Setup_CMD); CSR_WRITE_2(sc, IO_PORT_REG, 0); CSR_WRITE_2(sc, IO_PORT_REG, 0); CSR_WRITE_2(sc, IO_PORT_REG, (count + 1) * 6); ETHER_FIRST_MULTI(step, ac, enm); while (enm != NULL) { addr = (uint16_t*)enm->enm_addrlo; CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); ETHER_NEXT_MULTI(step, enm); } /* Program our MAC address as well */ /* XXX: Is this necessary? The Linux driver does this * but the NetBSD driver does not */ addr = (uint16_t*) sc->arpcom.ac_enaddr; CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_READ_2(sc, IO_PORT_REG); CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit); CSR_WRITE_1(sc, CMD_REG, MC_Setup_CMD); sc->tx_head = sc->tx_lower_limit; sc->tx_tail = sc->tx_head + XMT_HEADER_LEN + (count + 1) * 6; for (timeout = 0; timeout < 100; timeout++) { DELAY(2); if ((CSR_READ_1(sc, STATUS_REG) & Exec_Int) == 0) continue; status = CSR_READ_1(sc, CMD_REG); CSR_WRITE_1(sc, STATUS_REG, Exec_Int); break; } sc->tx_head = sc->tx_tail; } else { /* No multicast or promiscuous mode */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) & 0xDE); /* ~(Multi_IA | Promisc_Mode) */ CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); } } void ex_reset(struct ex_softc *sc) { int s; DODEBUG(Start_End, printf("ex_reset: start\n");); s = splnet(); ex_stop(sc); ex_init(sc); splx(s); DODEBUG(Start_End, printf("ex_reset: finish\n");); } void ex_watchdog(struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; DODEBUG(Start_End, printf("ex_watchdog: start\n");); ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE watchdog\n");); ifp->if_oerrors++; ex_reset(sc); ex_start(ifp); DODEBUG(Start_End, printf("ex_watchdog: finish\n");); } int ex_get_media(struct ex_softc *sc) { int current, media; media = ex_eeprom_read(sc, EE_W5); CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); current = CSR_READ_1(sc, REG3); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); if ((current & TPE_bit) && (media & EE_W5_PORT_TPE)) return(IFM_ETHER|IFM_10_T); if ((current & BNC_bit) && (media & EE_W5_PORT_BNC)) return(IFM_ETHER|IFM_10_2); if (media & EE_W5_PORT_AUI) return (IFM_ETHER|IFM_10_5); return (IFM_ETHER|IFM_AUTO); } int ex_ifmedia_upd (struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; if (IFM_TYPE(sc->ifmedia.ifm_media) != IFM_ETHER) return (EINVAL); return (0); } void ex_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct ex_softc *sc = ifp->if_softc; ifmr->ifm_status = IFM_AVALID | IFM_ACTIVE; ifmr->ifm_active = ex_get_media(sc); } u_short ex_eeprom_read(struct ex_softc *sc, int location) { int i; u_short data = 0; int read_cmd = location | EE_READ_CMD; short ctrl_val = EECS; CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, EEPROM_REG, EECS); for (i = 8; i >= 0; i--) { short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI : ctrl_val; CSR_WRITE_1(sc, EEPROM_REG, outval); CSR_WRITE_1(sc, EEPROM_REG, outval | EESK); delay(3); CSR_WRITE_1(sc, EEPROM_REG, outval); delay(2); } CSR_WRITE_1(sc, EEPROM_REG, ctrl_val); for (i = 16; i > 0; i--) { CSR_WRITE_1(sc, EEPROM_REG, ctrl_val | EESK); delay(3); data = (data << 1) | ((CSR_READ_1(sc, EEPROM_REG) & EEDO) ? 1 : 0); CSR_WRITE_1(sc, EEPROM_REG, ctrl_val); delay(2); } ctrl_val &= ~EECS; CSR_WRITE_1(sc, EEPROM_REG, ctrl_val | EESK); delay(3); CSR_WRITE_1(sc, EEPROM_REG, ctrl_val); delay(2); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); return(data); }