/* $OpenBSD: nsclpcsio_isa.c,v 1.5 2004/11/17 16:53:05 mickey Exp $ */ /* $NetBSD: nsclpcsio_isa.c,v 1.5 2002/10/22 16:18:26 drochner Exp $ */ /* * Copyright (c) 2002 Matthias Drochner. All rights reserved. * Copyright (c) 2004 Markus Friedl. All rights reserved. * Copyright (c) 2004 Alexander Yurchenko. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * National Semiconductor PC87366 LPC Super I/O. * Supported logical devices: GPIO, TMS, VLM. */ #include #include #include #include #include #include #include #include #include #include #include #if defined(NSC_LPC_SIO_DEBUG) #define DPRINTF(x) do { printf x; } while (0) #else #define DPRINTF(x) #endif #define SIO_REG_SID 0x20 /* Super I/O ID */ #define SIO_SID_PC87366 0xE9 /* PC87366 is identified by 0xE9.*/ #define SIO_REG_SRID 0x27 /* Super I/O Revision */ #define SIO_REG_LDN 0x07 /* Logical Device Number */ #define SIO_LDN_FDC 0x00 /* Floppy Disk Controller (FDC) */ #define SIO_LDN_PP 0x01 /* Parallel Port (PP) */ #define SIO_LDN_SP2 0x02 /* Serial Port 2 with IR (SP2) */ #define SIO_LDN_SP1 0x03 /* Serial Port 1 (SP1) */ #define SIO_LDN_SWC 0x04 /* System Wake-Up Control (SWC) */ #define SIO_LDN_KBCM 0x05 /* Mouse Controller (KBC) */ #define SIO_LDN_KBCK 0x06 /* Keyboard Controller (KBC) */ #define SIO_LDN_GPIO 0x07 /* General-Purpose I/O (GPIO) Ports */ #define SIO_LDN_ACB 0x08 /* ACCESS.bus Interface (ACB) */ #define SIO_LDN_FSCM 0x09 /* Fan Speed Control and Monitor (FSCM) */ #define SIO_LDN_WDT 0x0A /* WATCHDOG Timer (WDT) */ #define SIO_LDN_GMP 0x0B /* Game Port (GMP) */ #define SIO_LDN_MIDI 0x0C /* Musical Instrument Digital Interface */ #define SIO_LDN_VLM 0x0D /* Voltage Level Monitor (VLM) */ #define SIO_LDN_TMS 0x0E /* Temperature Sensor (TMS) */ #define SIO_REG_ACTIVE 0x30 /* Logical Device Activate Register */ #define SIO_ACTIVE_EN 0x01 /* enabled */ #define SIO_REG_IO_MSB 0x60 /* I/O Port Base, bits 15-8 */ #define SIO_REG_IO_LSB 0x61 /* I/O Port Base, bits 7-0 */ #define SIO_LDNUM 15 /* total number of logical devices */ /* Supported logical devices description */ static const struct { const char *ld_name; int ld_num; int ld_iosize; } sio_ld[] = { { "GPIO", SIO_LDN_GPIO, 16 }, { "VLM", SIO_LDN_VLM, 16 }, { "TMS", SIO_LDN_TMS, 16 }, }; /* GPIO */ #define SIO_GPIO_PINSEL 0xf0 #define SIO_GPIO_PINCFG 0xf1 #define SIO_GPIO_PINEV 0xf2 #define SIO_GPIO_CONF_OUTPUTEN (1 << 0) #define SIO_GPIO_CONF_PUSHPULL (1 << 1) #define SIO_GPIO_CONF_PULLUP (1 << 2) #define SIO_GPDO0 0x00 #define SIO_GPDI0 0x01 #define SIO_GPEVEN0 0x02 #define SIO_GPEVST0 0x03 #define SIO_GPDO1 0x04 #define SIO_GPDI1 0x05 #define SIO_GPEVEN1 0x06 #define SIO_GPEVST1 0x07 #define SIO_GPDO2 0x08 #define SIO_GPDI2 0x09 #define SIO_GPDO3 0x0a #define SIO_GPDI3 0x0b #define SIO_GPIO_NPINS 29 /* TMS */ #define SIO_TEVSTS 0x00 /* Temperature Event Status */ #define SIO_TEVSMI 0x02 /* Temperature Event to SMI */ #define SIO_TEVIRQ 0x04 /* Temperature Event to IRQ */ #define SIO_TMSCFG 0x08 /* TMS Configuration */ #define SIO_TMSBS 0x09 /* TMS Bank Select */ #define SIO_TCHCFST 0x0A /* Temperature Channel Config and Status */ #define SIO_RDCHT 0x0B /* Read Channel Temperature */ #define SIO_CHTH 0x0C /* Channel Temperature High Limit */ #define SIO_CHTL 0x0D /* Channel Temperature Low Limit */ #define SIO_CHOTL 0x0E /* Channel Overtemperature Limit */ /* VLM */ #define SIO_VEVSTS0 0x00 /* Voltage Event Status 0 */ #define SIO_VEVSTS1 0x01 /* Voltage Event Status 1 */ #define SIO_VEVSMI0 0x02 /* Voltage Event to SMI 0 */ #define SIO_VEVSMI1 0x03 /* Voltage Event to SMI 1 */ #define SIO_VEVIRQ0 0x04 /* Voltage Event to IRQ 0 */ #define SIO_VEVIRQ1 0x05 /* Voltage Event to IRQ 1 */ #define SIO_VID 0x06 /* Voltage ID */ #define SIO_VCNVR 0x07 /* Voltage Conversion Rate */ #define SIO_VLMCFG 0x08 /* VLM Configuration */ #define SIO_VLMBS 0x09 /* VLM Bank Select */ #define SIO_VCHCFST 0x0A /* Voltage Channel Config and Status */ #define SIO_RDCHV 0x0B /* Read Channel Voltage */ #define SIO_CHVH 0x0C /* Channel Voltage High Limit */ #define SIO_CHVL 0x0D /* Channel Voltage Low Limit */ #define SIO_OTSL 0x0E /* Overtemperature Shutdown Limit */ #define SIO_REG_SIOCF1 0x21 #define SIO_REG_SIOCF2 0x22 #define SIO_REG_SIOCF3 0x23 #define SIO_REG_SIOCF4 0x24 #define SIO_REG_SIOCF5 0x25 #define SIO_REG_SIOCF8 0x28 #define SIO_REG_SIOCFA 0x2A #define SIO_REG_SIOCFB 0x2B #define SIO_REG_SIOCFC 0x2C #define SIO_REG_SIOCFD 0x2D #define SIO_NUM_SENSORS (3+14) #define SIO_VLM_OFF 3 #define SIO_VREF 1235 /* 1000.0 * VREF */ struct nsclpcsio_softc { struct device sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; bus_space_handle_t sc_ld_ioh[SIO_LDNUM]; int sc_ld_en[SIO_LDNUM]; /* GPIO */ struct gpio_chipset_tag sc_gpio_gc; struct gpio_pin sc_gpio_pins[SIO_GPIO_NPINS]; /* TMS and VLM */ struct sensor sensors[SIO_NUM_SENSORS]; }; #define GPIO_READ(sc, reg) \ bus_space_read_1((sc)->sc_iot, \ (sc)->sc_ld_ioh[SIO_LDN_GPIO], (reg)) #define GPIO_WRITE(sc, reg, val) \ bus_space_write_1((sc)->sc_iot, \ (sc)->sc_ld_ioh[SIO_LDN_GPIO], (reg), (val)) #define TMS_WRITE(sc, reg, val) \ bus_space_write_1((sc)->sc_iot, \ (sc)->sc_ld_ioh[SIO_LDN_TMS], (reg), (val)) #define TMS_READ(sc, reg) \ bus_space_read_1((sc)->sc_iot, \ (sc)->sc_ld_ioh[SIO_LDN_TMS], (reg)) #define VLM_WRITE(sc, reg, val) \ bus_space_write_1((sc)->sc_iot, \ (sc)->sc_ld_ioh[SIO_LDN_VLM], (reg), (val)) #define VLM_READ(sc, reg) \ bus_space_read_1((sc)->sc_iot, \ (sc)->sc_ld_ioh[SIO_LDN_VLM], (reg)) int nsclpcsio_isa_match(struct device *, void *, void *); void nsclpcsio_isa_attach(struct device *, struct device *, void *); struct cfattach nsclpcsio_isa_ca = { sizeof(struct nsclpcsio_softc), nsclpcsio_isa_match, nsclpcsio_isa_attach }; struct cfdriver nsclpcsio_cd = { NULL, "nsclpcsio", DV_DULL }; struct timeout nsclpcsio_timeout; static u_int8_t nsread(bus_space_tag_t, bus_space_handle_t, int); static void nswrite(bus_space_tag_t, bus_space_handle_t, int, u_int8_t); void nsclpcsio_gpio_init(struct nsclpcsio_softc *); int nsclpcsio_gpio_pin_read(void *, int); void nsclpcsio_gpio_pin_write(void *, int, int); void nsclpcsio_gpio_pin_ctl(void *, int, int); void nsclpcsio_tms_init(struct nsclpcsio_softc *); void nsclpcsio_vlm_init(struct nsclpcsio_softc *); void nsclpcsio_tms_update(struct nsclpcsio_softc *); void nsclpcsio_vlm_update(struct nsclpcsio_softc *); void nsclpcsio_refresh(void *); static u_int8_t nsread(bus_space_tag_t iot, bus_space_handle_t ioh, int idx) { bus_space_write_1(iot, ioh, 0, idx); return (bus_space_read_1(iot, ioh, 1)); } static void nswrite(bus_space_tag_t iot, bus_space_handle_t ioh, int idx, u_int8_t data) { bus_space_write_1(iot, ioh, 0, idx); bus_space_write_1(iot, ioh, 1, data); } int nsclpcsio_isa_match(struct device *parent, void *match, void *aux) { struct isa_attach_args *ia = aux; bus_space_tag_t iot; bus_space_handle_t ioh; int iobase; int rv = 0; iot = ia->ia_iot; iobase = ia->ipa_io[0].base; if (bus_space_map(iot, iobase, 2, 0, &ioh)) return (0); if (nsread(iot, ioh, SIO_REG_SID) == SIO_SID_PC87366) rv = 1; bus_space_unmap(iot, ioh, 2); if (rv) { ia->ipa_nio = 1; ia->ipa_io[0].length = 2; ia->ipa_nmem = 0; ia->ipa_nirq = 0; ia->ipa_ndrq = 0; } return (rv); } void nsclpcsio_isa_attach(struct device *parent, struct device *self, void *aux) { struct nsclpcsio_softc *sc = (void *)self; struct isa_attach_args *ia = aux; struct gpiobus_attach_args gba; bus_space_tag_t iot; int iobase; int i; iobase = ia->ipa_io[0].base; sc->sc_iot = iot = ia->ia_iot; if (bus_space_map(ia->ia_iot, iobase, 2, 0, &sc->sc_ioh)) { printf(": can't map i/o space\n"); return; } printf(": NSC PC87366 rev %d:", nsread(sc->sc_iot, sc->sc_ioh, SIO_REG_SRID)); /* Configure all supported logical devices */ for (i = 0; i < sizeof(sio_ld) / sizeof(sio_ld[0]); i++) { sc->sc_ld_en[sio_ld[i].ld_num] = 0; /* Select the device and check if it's activated */ nswrite(sc->sc_iot, sc->sc_ioh, SIO_REG_LDN, sio_ld[i].ld_num); if ((nsread(sc->sc_iot, sc->sc_ioh, SIO_REG_ACTIVE) & SIO_ACTIVE_EN) == 0) continue; /* Map I/O space if necessary */ if (sio_ld[i].ld_iosize != 0) { iobase = (nsread(sc->sc_iot, sc->sc_ioh, SIO_REG_IO_MSB) << 8); iobase |= nsread(sc->sc_iot, sc->sc_ioh, SIO_REG_IO_LSB); if (bus_space_map(sc->sc_iot, iobase, sio_ld[i].ld_iosize, 0, &sc->sc_ld_ioh[sio_ld[i].ld_num])) continue; } sc->sc_ld_en[sio_ld[i].ld_num] = 1; printf(" %s", sio_ld[i].ld_name); } printf("\n"); nsclpcsio_gpio_init(sc); nsclpcsio_tms_init(sc); nsclpcsio_vlm_init(sc); /* Hook into hw.sensors sysctl */ for (i = 0; i < SIO_NUM_SENSORS; i++) { if (i < SIO_VLM_OFF && !sc->sc_ld_en[SIO_LDN_TMS]) continue; if (i >= SIO_VLM_OFF && !sc->sc_ld_en[SIO_LDN_VLM]) continue; strlcpy(sc->sensors[i].device, sc->sc_dev.dv_xname, sizeof(sc->sensors[i].device)); SENSOR_ADD(&sc->sensors[i]); } if (sc->sc_ld_en[SIO_LDN_TMS] || sc->sc_ld_en[SIO_LDN_VLM]) { timeout_set(&nsclpcsio_timeout, nsclpcsio_refresh, sc); timeout_add(&nsclpcsio_timeout, (20 * hz) / 10); } /* Attach GPIO framework */ if (sc->sc_ld_en[SIO_LDN_GPIO]) { gba.gba_name = "gpio"; gba.gba_gc = &sc->sc_gpio_gc; gba.gba_pins = sc->sc_gpio_pins; gba.gba_npins = SIO_GPIO_NPINS; config_found(&sc->sc_dev, &gba, NULL); } } void nsclpcsio_refresh(void *arg) { struct nsclpcsio_softc *sc = (struct nsclpcsio_softc *)arg; if (sc->sc_ld_en[SIO_LDN_TMS]) nsclpcsio_tms_update(sc); if (sc->sc_ld_en[SIO_LDN_VLM]) nsclpcsio_vlm_update(sc); timeout_add(&nsclpcsio_timeout, (20 * hz) / 10); } void nsclpcsio_tms_init(struct nsclpcsio_softc *sc) { int i; /* Initialisation, PC87366.pdf, page 208 */ TMS_WRITE(sc, 0x08, 0x00); TMS_WRITE(sc, 0x09, 0x0f); TMS_WRITE(sc, 0x0a, 0x08); TMS_WRITE(sc, 0x0b, 0x04); TMS_WRITE(sc, 0x0c, 0x35); TMS_WRITE(sc, 0x0d, 0x05); TMS_WRITE(sc, 0x0e, 0x05); TMS_WRITE(sc, SIO_TMSCFG, 0x00); /* Enable the sensors */ for (i = 0; i < 3; i++) { TMS_WRITE(sc, SIO_TMSBS, i); TMS_WRITE(sc, SIO_TCHCFST, 0x01); sc->sensors[i].type = SENSOR_TEMP; } strlcpy(sc->sensors[0].desc, "TSENS1", sizeof(sc->sensors[0].desc)); strlcpy(sc->sensors[1].desc, "TSENS2", sizeof(sc->sensors[0].desc)); strlcpy(sc->sensors[2].desc, "TNSC", sizeof(sc->sensors[0].desc)); nsclpcsio_tms_update(sc); } void nsclpcsio_tms_update(struct nsclpcsio_softc *sc) { u_int8_t status; int8_t sdata; int i; for (i = 0; i < 3; i++) { TMS_WRITE(sc, SIO_TMSBS, i); status = TMS_READ(sc, SIO_TCHCFST); if (!(status & 0x01)) { DPRINTF(("%s: status %d: disabled\n", sc->sensors[i].desc, status)); sc->sensors[i].value = 0; continue; } sdata = TMS_READ(sc, SIO_RDCHT); DPRINTF(("%s: status %d C %d\n", sc->sensors[i].desc, status, sdata)); sc->sensors[i].value = sdata * 1000000 + 273150000; } } void nsclpcsio_vlm_init(struct nsclpcsio_softc *sc) { int scale, i; char *desc = NULL; VLM_WRITE(sc, SIO_VLMCFG, 0x00); /* Enable the sensors */ for (i = 0; i < 14; i++) { VLM_WRITE(sc, SIO_VLMBS, i); VLM_WRITE(sc, SIO_VCHCFST, 0x01); desc = NULL; scale = 1; switch (i) { case 7: desc = "VSB"; scale = 2; break; case 8: desc = "VDD"; scale = 2; break; case 9: desc = "VBAT"; break; case 10: desc = "AVDD"; scale = 2; break; case 11: desc = "TS1"; break; case 12: desc = "TS2"; break; case 13: desc = "TS3"; break; } if (desc != NULL) strlcpy(sc->sensors[SIO_VLM_OFF + i].desc, desc, sizeof(sc->sensors[SIO_VLM_OFF + i].desc)); else snprintf(sc->sensors[SIO_VLM_OFF + i].desc, sizeof(sc->sensors[SIO_VLM_OFF].desc), "VSENS%d", i); sc->sensors[SIO_VLM_OFF + i].type = SENSOR_VOLTS_DC; /* Vi = (2.45±0.05)*VREF *RDCHVi / 256 */ sc->sensors[SIO_VLM_OFF + i].rfact = 10 * scale * ((245 * SIO_VREF) >> 8); } nsclpcsio_vlm_update(sc); } void nsclpcsio_vlm_update(struct nsclpcsio_softc *sc) { u_int8_t status; u_int8_t data; int i; for (i = 0; i < 14; i++) { VLM_WRITE(sc, SIO_VLMBS, i); status = VLM_READ(sc, SIO_VCHCFST); if (!(status & 0x01)) { DPRINTF(("%s: status %d: disabled\n", sc->sensors[SIO_VLM_OFF + i].desc, status)); sc->sensors[SIO_VLM_OFF + i].value = 0; continue; } data = VLM_READ(sc, SIO_RDCHV); DPRINTF(("%s: status %d V %d\n", sc->sensors[SIO_VLM_OFF + i].desc, status, data)); sc->sensors[SIO_VLM_OFF + i].value = data * sc->sensors[SIO_VLM_OFF + i].rfact; } } static __inline void nsclpcsio_gpio_pin_select(struct nsclpcsio_softc *sc, int pin) { int port, shift; u_int8_t data; port = pin / 8; shift = pin % 8; data = (port << 4) | shift; nswrite(sc->sc_iot, sc->sc_ioh, SIO_REG_LDN, SIO_LDN_GPIO); nswrite(sc->sc_iot, sc->sc_ioh, SIO_GPIO_PINSEL, data); } void nsclpcsio_gpio_init(struct nsclpcsio_softc *sc) { int i; for (i = 0; i < SIO_GPIO_NPINS; i++) { sc->sc_gpio_pins[i].pin_num = i; sc->sc_gpio_pins[i].pin_caps = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT | GPIO_PIN_OPENDRAIN | GPIO_PIN_PUSHPULL | GPIO_PIN_TRISTATE | GPIO_PIN_PULLUP; /* safe defaults */ sc->sc_gpio_pins[i].pin_flags = GPIO_PIN_TRISTATE; sc->sc_gpio_pins[i].pin_state = GPIO_PIN_LOW; nsclpcsio_gpio_pin_ctl(sc, i, sc->sc_gpio_pins[i].pin_flags); nsclpcsio_gpio_pin_write(sc, i, sc->sc_gpio_pins[i].pin_state); } /* Create controller tag */ sc->sc_gpio_gc.gp_cookie = sc; sc->sc_gpio_gc.gp_pin_read = nsclpcsio_gpio_pin_read; sc->sc_gpio_gc.gp_pin_write = nsclpcsio_gpio_pin_write; sc->sc_gpio_gc.gp_pin_ctl = nsclpcsio_gpio_pin_ctl; } int nsclpcsio_gpio_pin_read(void *arg, int pin) { struct nsclpcsio_softc *sc = arg; int port, shift, reg; u_int8_t data; port = pin / 8; shift = pin % 8; switch (port) { case 0: reg = SIO_GPDI0; break; case 1: reg = SIO_GPDI1; break; case 2: reg = SIO_GPDI2; break; case 3: reg = SIO_GPDI3; break; } data = GPIO_READ(sc, reg); return ((data >> shift) & 0x1); } void nsclpcsio_gpio_pin_write(void *arg, int pin, int value) { struct nsclpcsio_softc *sc = arg; int port, shift, reg; u_int8_t data; port = pin / 8; shift = pin % 8; switch (port) { case 0: reg = SIO_GPDO0; break; case 1: reg = SIO_GPDO1; break; case 2: reg = SIO_GPDO2; break; case 3: reg = SIO_GPDO3; break; } data = GPIO_READ(sc, reg); if (value == 0) data &= ~(1 << shift); else if (value == 1) data |= (1 << shift); GPIO_WRITE(sc, reg, data); } void nsclpcsio_gpio_pin_ctl(void *arg, int pin, int flags) { struct nsclpcsio_softc *sc = arg; u_int8_t conf = 1; nswrite(sc->sc_iot, sc->sc_ioh, SIO_REG_LDN, SIO_LDN_GPIO); nsclpcsio_gpio_pin_select(sc, pin); conf = nsread(sc->sc_iot, sc->sc_ioh, SIO_GPIO_PINCFG); conf &= ~(SIO_GPIO_CONF_OUTPUTEN | SIO_GPIO_CONF_PUSHPULL | SIO_GPIO_CONF_PULLUP); if ((flags & GPIO_PIN_TRISTATE) == 0) conf |= SIO_GPIO_CONF_OUTPUTEN; if (flags & GPIO_PIN_PUSHPULL) conf |= SIO_GPIO_CONF_PUSHPULL; if (flags & GPIO_PIN_PULLUP) conf |= SIO_GPIO_CONF_PULLUP; nswrite(sc->sc_iot, sc->sc_ioh, SIO_GPIO_PINCFG, conf); }