/* $OpenBSD: sb.c,v 1.13 1997/08/07 05:27:32 deraadt Exp $ */ /* $NetBSD: sb.c,v 1.36 1996/05/12 23:53:33 mycroft Exp $ */ /* * Copyright (c) 1991-1993 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Computer Systems * Engineering Group at Lawrence Berkeley Laboratory. * 4. Neither the name of the University nor of the Laboratory may be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct sb_softc { struct device sc_dev; /* base device */ struct isadev sc_id; /* ISA device */ void *sc_ih; /* interrupt vectoring */ struct sbdsp_softc sc_sbdsp; }; struct cfdriver sb_cd = { NULL, "sb", DV_DULL }; struct audio_device sb_device = { "SoundBlaster", "x", "sb" }; int sbopen __P((dev_t, int)); int sb_getdev __P((void *, struct audio_device *)); /* * Define our interface to the higher level audio driver. */ struct audio_hw_if sb_hw_if = { sbopen, sbdsp_close, NULL, sbdsp_set_in_sr, sbdsp_get_in_sr, sbdsp_set_out_sr, sbdsp_get_out_sr, sbdsp_query_encoding, sbdsp_set_format, sbdsp_get_encoding, sbdsp_get_precision, sbdsp_set_channels, sbdsp_get_channels, sbdsp_round_blocksize, sbdsp_set_out_port, sbdsp_get_out_port, sbdsp_set_in_port, sbdsp_get_in_port, sbdsp_commit_settings, mulaw_expand, mulaw_compress, sbdsp_dma_output, sbdsp_dma_input, sbdsp_haltdma, sbdsp_haltdma, sbdsp_contdma, sbdsp_contdma, sbdsp_speaker_ctl, sb_getdev, sbdsp_setfd, sbdsp_mixer_set_port, sbdsp_mixer_get_port, sbdsp_mixer_query_devinfo, 0, /* not full-duplex */ 0 }; /* * Probe / attach routines. */ int sbmatch(sc) struct sbdsp_softc *sc; { static u_char drq_conf[8] = { 0x01, 0x02, -1, 0x08, -1, 0x20, 0x40, 0x80 }; static u_char irq_conf[11] = { -1, -1, 0x01, -1, -1, 0x02, -1, 0x04, -1, 0x01, 0x08 }; if (sbdsp_probe(sc) == 0) return 0; /* * Cannot auto-discover DMA channel. */ if (ISSBPROCLASS(sc)) { if (!SBP_DRQ_VALID(sc->sc_drq8)) { printf("%s: configured dma chan %d invalid\n", sc->sc_dev.dv_xname, sc->sc_drq8); return 0; } } else { if (!SB_DRQ_VALID(sc->sc_drq8)) { printf("%s: configured dma chan %d invalid\n", sc->sc_dev.dv_xname, sc->sc_drq8); return 0; } } if (ISSB16CLASS(sc)) { if (sc->sc_drq16 == -1) sc->sc_drq16 = sc->sc_drq8; if (!SB16_DRQ_VALID(sc->sc_drq16)) { printf("%s: configured dma chan %d invalid\n", sc->sc_dev.dv_xname, sc->sc_drq16); return 0; } } else sc->sc_drq16 = sc->sc_drq8; #ifdef NEWCONFIG /* * If the IRQ wasn't compiled in, auto-detect it. */ if (sc->sc_irq == IRQUNK) { sc->sc_irq = isa_discoverintr(sbforceintr, sc); sbdsp_reset(sc); if (ISSBPROCLASS(sc)) { if (!SBP_IRQ_VALID(sc->sc_irq)) { printf("%s: couldn't auto-detect interrupt\n", sc->sc_dev.dv_xname); return 0; } } else { if (!SB_IRQ_VALID(sc->sc_irq)) { printf("%s: couldn't auto-detect interrupt\n"); sc->sc_dev.dv_xname); return 0; } } } else #endif if (ISSBPROCLASS(sc)) { if (!SBP_IRQ_VALID(sc->sc_irq)) { printf("%s: configured irq %d invalid\n", sc->sc_dev.dv_xname, sc->sc_irq); return 0; } } else { if (!SB_IRQ_VALID(sc->sc_irq)) { printf("%s: configured irq %d invalid\n", sc->sc_dev.dv_xname, sc->sc_irq); return 0; } } if (ISSB16CLASS(sc)) { #if 0 printf("%s: old drq conf %02x\n", sc->sc_dev.dv_xname, sbdsp_mix_read(sc, SBP_SET_DRQ)); printf("%s: try drq conf %02x\n", sc->sc_dev.dv_xname, drq_conf[sc->sc_drq16] | drq_conf[sc->sc_drq8]); #endif sbdsp_mix_write(sc, SBP_SET_DRQ, drq_conf[sc->sc_drq16] | drq_conf[sc->sc_drq8]); #if 0 printf("%s: new drq conf %02x\n", sc->sc_dev.dv_xname, sbdsp_mix_read(sc, SBP_SET_DRQ)); #endif #if 0 printf("%s: old irq conf %02x\n", sc->sc_dev.dv_xname, sbdsp_mix_read(sc, SBP_SET_IRQ)); printf("%s: try irq conf %02x\n", sc->sc_dev.dv_xname, irq_conf[sc->sc_irq]); #endif sbdsp_mix_write(sc, SBP_SET_IRQ, irq_conf[sc->sc_irq]); #if 0 printf("%s: new irq conf %02x\n", sc->sc_dev.dv_xname, sbdsp_mix_read(sc, SBP_SET_IRQ)); #endif } return 1; } void sbattach(sc) struct sbdsp_softc *sc; { int error; sc->sc_ih = isa_intr_establish(sc->sc_ic, sc->sc_irq, IST_EDGE, IPL_AUDIO, sbdsp_intr, sc, sc->sc_dev.dv_xname); sbdsp_attach(sc); if ((error = audio_hardware_attach(&sb_hw_if, sc)) != 0) printf("%s: could not attach to audio device driver (%d)\n", sc->sc_dev.dv_xname, error); } #ifdef NEWCONFIG void sbforceintr(aux) void *aux; { static char dmabuf; struct sbdsp_softc *sc = aux; /* * Set up a DMA read of one byte. * XXX Note that at this point we haven't called * at_setup_dmachan(). This is okay because it just * allocates a buffer in case it needs to make a copy, * and it won't need to make a copy for a 1 byte buffer. * (I think that calling at_setup_dmachan() should be optional; * if you don't call it, it will be called the first time * it is needed (and you pay the latency). Also, you might * never need the buffer anyway.) */ at_dma(DMAMODE_READ, &dmabuf, 1, sc->sc_drq8); if (sbdsp_wdsp(sc, SB_DSP_RDMA) == 0) { (void)sbdsp_wdsp(sc, 0); (void)sbdsp_wdsp(sc, 0); } } #endif /* * Various routines to interface to higher level audio driver */ int sbopen(dev, flags) dev_t dev; int flags; { struct sbdsp_softc *sc; int unit = AUDIOUNIT(dev); if (unit >= sb_cd.cd_ndevs) return ENODEV; sc = sb_cd.cd_devs[unit]; if (!sc) return ENXIO; return sbdsp_open(sc, dev, flags); } int sb_getdev(addr, retp) void *addr; struct audio_device *retp; { struct sbdsp_softc *sc = addr; if (sc->sc_model & MODEL_JAZZ16) strncpy(retp->name, "MV Jazz16", sizeof(retp->name)); else strncpy(retp->name, "SoundBlaster", sizeof(retp->name)); sprintf(retp->version, "%d.%02d", SBVER_MAJOR(sc->sc_model), SBVER_MINOR(sc->sc_model)); strncpy(retp->config, "sb", sizeof(retp->config)); return 0; }