/* $OpenBSD: nsphy.c,v 1.24 2008/09/08 07:38:33 brad Exp $ */ /* $NetBSD: nsphy.c,v 1.25 2000/02/02 23:34:57 thorpej Exp $ */ /*- * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1997 Manuel Bouyer. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * driver for National Semiconductor's DP83840A ethernet 10/100 PHY * Data Sheet available from www.national.com */ #include #include #include #include #include #include #include #include #include #include #include #include int nsphymatch(struct device *, void *, void *); void nsphyattach(struct device *, struct device *, void *); struct cfattach nsphy_ca = { sizeof(struct mii_softc), nsphymatch, nsphyattach, mii_phy_detach, mii_phy_activate }; struct cfdriver nsphy_cd = { NULL, "nsphy", DV_DULL }; int nsphy_service(struct mii_softc *, struct mii_data *, int); void nsphy_status(struct mii_softc *); void nsphy_reset(struct mii_softc *); const struct mii_phy_funcs nsphy_funcs = { nsphy_service, nsphy_status, nsphy_reset, }; static const struct mii_phydesc nsphys[] = { { MII_OUI_NATSEMI, MII_MODEL_NATSEMI_DP83840, MII_STR_NATSEMI_DP83840 }, { 0, 0, NULL }, }; int nsphymatch(struct device *parent, void *match, void *aux) { struct mii_attach_args *ma = aux; if (mii_phy_match(ma, nsphys) != NULL) return (10); return (0); } void nsphyattach(struct device *parent, struct device *self, void *aux) { struct mii_softc *sc = (struct mii_softc *)self; struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; mpd = mii_phy_match(ma, nsphys); printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); sc->mii_inst = mii->mii_instance; sc->mii_phy = ma->mii_phyno; sc->mii_funcs = &nsphy_funcs; sc->mii_pdata = mii; sc->mii_flags = ma->mii_flags; sc->mii_anegticks = MII_ANEGTICKS; PHY_RESET(sc); sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; if (sc->mii_capabilities & BMSR_MEDIAMASK) mii_phy_add_media(sc); } int nsphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int reg; if ((sc->mii_dev.dv_flags & DVF_ACTIVE) == 0) return (ENXIO); switch (cmd) { case MII_POLLSTAT: /* * If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { reg = PHY_READ(sc, MII_BMCR); PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); return (0); } /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; reg = PHY_READ(sc, MII_NSPHY_PCR); /* * Set up the PCR to use LED4 to indicate full-duplex * in both 10baseT and 100baseTX modes. */ reg |= PCR_LED4MODE; /* * Make sure Carrier Integrity Monitor function is * disabled (normal for Node operation, but sometimes * it's not set?!) */ reg |= PCR_CIMDIS; /* * Make sure "force link good" is set to normal mode. * It's only intended for debugging. */ reg |= PCR_FLINK100; /* * Mystery bits which are supposedly `reserved', * but we seem to need to set them when the PHY * is connected to some interfaces! */ reg |= PCR_CONGCTRL | PCR_TXREADYSEL; PHY_WRITE(sc, MII_NSPHY_PCR, reg); mii_phy_setmedia(sc); break; case MII_TICK: /* * If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); if (mii_phy_tick(sc) == EJUSTRETURN) return (0); break; case MII_DOWN: mii_phy_down(sc); return (0); } /* Update the media status. */ mii_phy_status(sc); /* Callback if something changed. */ mii_phy_update(sc, cmd); return (0); } void nsphy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int bmsr, bmcr, par, anlpar; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); if (bmsr & BMSR_LINK) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(sc, MII_BMCR); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { /* * The PAR status bits are only valid if autonegotiation * has completed (or it's disabled). */ if ((bmsr & BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } /* * Argh. The PAR doesn't seem to indicate duplex mode * properly! Determine media based on link partner's * advertised capabilities. */ if (PHY_READ(sc, MII_ANER) & ANER_LPAN) { anlpar = PHY_READ(sc, MII_ANAR) & PHY_READ(sc, MII_ANLPAR); if (anlpar & ANLPAR_TX_FD) mii->mii_media_active |= IFM_100_TX|IFM_FDX; else if (anlpar & ANLPAR_T4) mii->mii_media_active |= IFM_100_T4|IFM_HDX; else if (anlpar & ANLPAR_TX) mii->mii_media_active |= IFM_100_TX|IFM_HDX; else if (anlpar & ANLPAR_10_FD) mii->mii_media_active |= IFM_10_T|IFM_FDX; else if (anlpar & ANLPAR_10) mii->mii_media_active |= IFM_10_T|IFM_HDX; else mii->mii_media_active |= IFM_NONE; return; } /* * Link partner is not capable of autonegotiation. * We will never be in full-duplex mode if this is * the case, so reading the PAR is OK. */ par = PHY_READ(sc, MII_NSPHY_PAR); if (par & PAR_10) mii->mii_media_active |= IFM_10_T; else mii->mii_media_active |= IFM_100_TX; mii->mii_media_active |= IFM_HDX; } else mii->mii_media_active = ife->ifm_media; } void nsphy_reset(struct mii_softc *sc) { int anar; mii_phy_reset(sc); anar = PHY_READ(sc, MII_ANAR); anar |= BMSR_MEDIA_TO_ANAR(PHY_READ(sc, MII_BMSR)); PHY_WRITE(sc, MII_ANAR, anar); }