/* $OpenBSD: rgephy.c,v 1.16 2006/09/17 19:36:54 brad Exp $ */ /* * Copyright (c) 2003 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: rgephy.c,v 1.5 2004/05/30 17:57:40 phk Exp $ */ /* * Driver for the RealTek 8169S/8110S internal 10/100/1000 PHY. */ #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif #include #include #include #include #include #include #include int rgephymatch(struct device *, void *, void *); void rgephyattach(struct device *, struct device *, void *); struct cfattach rgephy_ca = { sizeof(struct mii_softc), rgephymatch, rgephyattach, mii_phy_detach, mii_phy_activate }; struct cfdriver rgephy_cd = { NULL, "rgephy", DV_DULL }; int rgephy_service(struct mii_softc *, struct mii_data *, int); void rgephy_status(struct mii_softc *); int rgephy_mii_phy_auto(struct mii_softc *); void rgephy_reset(struct mii_softc *); void rgephy_loop(struct mii_softc *); void rgephy_load_dspcode(struct mii_softc *); const struct mii_phy_funcs rgephy_funcs = { rgephy_service, rgephy_status, rgephy_reset, }; static const struct mii_phydesc rgephys[] = { { MII_OUI_REALTEK2, MII_MODEL_xxREALTEK_RTL8169S, MII_STR_xxREALTEK_RTL8169S }, { MII_OUI_xxREALTEK, MII_MODEL_xxREALTEK_RTL8169S, MII_STR_xxREALTEK_RTL8169S }, { 0, 0, NULL }, }; int rgephymatch(struct device *parent, void *match, void *aux) { struct mii_attach_args *ma = aux; if (mii_phy_match(ma, rgephys) != NULL) return (10); return (0); } void rgephyattach(struct device *parent, struct device *self, void *aux) { struct mii_softc *sc = (struct mii_softc *)self; struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; mpd = mii_phy_match(ma, rgephys); printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); sc->mii_inst = mii->mii_instance; sc->mii_phy = ma->mii_phyno; sc->mii_funcs = &rgephy_funcs; sc->mii_pdata = mii; sc->mii_flags = ma->mii_flags; sc->mii_anegticks = MII_ANEGTICKS; sc->mii_flags |= MIIF_NOISOLATE; sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; if (sc->mii_capabilities & BMSR_EXTSTAT) sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR); if ((sc->mii_capabilities & BMSR_MEDIAMASK) || (sc->mii_extcapabilities & EXTSR_MEDIAMASK)) mii_phy_add_media(sc); PHY_RESET(sc); } int rgephy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int anar, reg, speed, gig = 0; switch (cmd) { case MII_POLLSTAT: /* * If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { reg = PHY_READ(sc, MII_BMCR); PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); return (0); } /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; PHY_RESET(sc); /* XXX hardware bug work-around */ anar = PHY_READ(sc, RGEPHY_MII_ANAR); anar &= ~(RGEPHY_ANAR_TX_FD | RGEPHY_ANAR_TX | RGEPHY_ANAR_10_FD | RGEPHY_ANAR_10); switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: #ifdef foo /* * If we're already in auto mode, just return. */ if (PHY_READ(sc, RGEPHY_MII_BMCR) & RGEPHY_BMCR_AUTOEN) return (0); #endif (void) rgephy_mii_phy_auto(sc); break; case IFM_1000_T: speed = RGEPHY_S1000; goto setit; case IFM_100_TX: speed = RGEPHY_S100; anar |= RGEPHY_ANAR_TX_FD | RGEPHY_ANAR_TX; goto setit; case IFM_10_T: speed = RGEPHY_S10; anar |= RGEPHY_ANAR_10_FD | RGEPHY_ANAR_10; setit: rgephy_loop(sc); if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) { speed |= RGEPHY_BMCR_FDX; if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) gig = RGEPHY_1000CTL_AFD; anar &= ~(RGEPHY_ANAR_TX | RGEPHY_ANAR_10); } else { if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) gig = RGEPHY_1000CTL_AHD; anar &= ~(RGEPHY_ANAR_TX_FD | RGEPHY_ANAR_10_FD); } /* * When setting the link manually, one side must * be the master and the other the slave. However * ifmedia doesn't give us a good way to specify * this, so we fake it by using one of the LINK * flags. If LINK0 is set, we program the PHY to * be a master, otherwise it's a slave. */ if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) { gig |= RGEPHY_1000CTL_MSE; if (mii->mii_ifp->if_flags & IFF_LINK0) gig |= RGEPHY_1000CTL_MSC; } PHY_WRITE(sc, RGEPHY_MII_1000CTL, gig); PHY_WRITE(sc, RGEPHY_MII_BMCR, speed | RGEPHY_BMCR_AUTOEN | RGEPHY_BMCR_STARTNEG); PHY_WRITE(sc, RGEPHY_MII_ANAR, anar); break; #ifdef foo case IFM_NONE: PHY_WRITE(sc, MII_BMCR, BMCR_ISO|BMCR_PDOWN); break; #endif case IFM_100_T4: default: return (EINVAL); } break; case MII_TICK: /* * If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); /* * Is the interface even up? */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) return (0); /* * Only used for autonegotiation. */ if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) break; /* * Check to see if we have link. If we do, we don't * need to restart the autonegotiation process. Read * the BMSR twice in case it's latched. */ reg = PHY_READ(sc, RL_GMEDIASTAT); if (reg & RL_GMEDIASTAT_LINK) break; /* * Only retry autonegotiation every mii_anegticks seconds. */ if (++sc->mii_ticks <= sc->mii_anegticks) break; sc->mii_ticks = 0; rgephy_mii_phy_auto(sc); return (0); } /* Update the media status. */ rgephy_status(sc); /* * Callback if something changed. Note that we need to poke * the DSP on the RealTek PHYs if the media changes. * */ if (sc->mii_media_active != mii->mii_media_active || sc->mii_media_status != mii->mii_media_status || cmd == MII_MEDIACHG) rgephy_load_dspcode(sc); /* Callback if something changed. */ mii_phy_update(sc, cmd); return (0); } void rgephy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; int bmsr, bmcr; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, RL_GMEDIASTAT); if (bmsr & RL_GMEDIASTAT_LINK) mii->mii_media_status |= IFM_ACTIVE; bmsr = PHY_READ(sc, RGEPHY_MII_BMSR); bmcr = PHY_READ(sc, RGEPHY_MII_BMCR); if (bmcr & RGEPHY_BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & RGEPHY_BMCR_AUTOEN) { if ((bmsr & RGEPHY_BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } } bmsr = PHY_READ(sc, RL_GMEDIASTAT); if (bmsr & RL_GMEDIASTAT_1000MBPS) mii->mii_media_active |= IFM_1000_T; else if (bmsr & RL_GMEDIASTAT_100MBPS) mii->mii_media_active |= IFM_100_TX; else if (bmsr & RL_GMEDIASTAT_10MBPS) mii->mii_media_active |= IFM_10_T; if (bmsr & RL_GMEDIASTAT_FDX) mii->mii_media_active |= IFM_FDX; } int rgephy_mii_phy_auto(struct mii_softc *sc) { rgephy_loop(sc); PHY_RESET(sc); PHY_WRITE(sc, RGEPHY_MII_ANAR, BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA); DELAY(1000); PHY_WRITE(sc, RGEPHY_MII_1000CTL, RGEPHY_1000CTL_AHD | RGEPHY_1000CTL_AFD); DELAY(1000); PHY_WRITE(sc, RGEPHY_MII_BMCR, RGEPHY_BMCR_AUTOEN | RGEPHY_BMCR_STARTNEG); DELAY(100); return (EJUSTRETURN); } void rgephy_loop(struct mii_softc *sc) { u_int32_t bmsr; int i; PHY_WRITE(sc, RGEPHY_MII_BMCR, RGEPHY_BMCR_PDOWN); DELAY(1000); for (i = 0; i < 15000; i++) { bmsr = PHY_READ(sc, RGEPHY_MII_BMSR); if (!(bmsr & RGEPHY_BMSR_LINK)) break; DELAY(10); } } #define PHY_SETBIT(x, y, z) \ PHY_WRITE(x, y, (PHY_READ(x, y) | (z))) #define PHY_CLRBIT(x, y, z) \ PHY_WRITE(x, y, (PHY_READ(x, y) & ~(z))) /* * Initialize RealTek PHY per the datasheet. The DSP in the PHYs of * existing revisions of the 8169S/8110S chips need to be tuned in * order to reliably negotiate a 1000Mbps link. This is only needed * for rev 0 and rev 1 of the PHY. Later versions work without * any fixups. */ void rgephy_load_dspcode(struct mii_softc *sc) { int val; u_int16_t id2; id2 = PHY_READ(sc, MII_PHYIDR2); if (MII_REV(id2) > 1) return; PHY_WRITE(sc, 31, 0x0001); PHY_WRITE(sc, 21, 0x1000); PHY_WRITE(sc, 24, 0x65C7); PHY_CLRBIT(sc, 4, 0x0800); val = PHY_READ(sc, 4) & 0xFFF; PHY_WRITE(sc, 4, val); PHY_WRITE(sc, 3, 0x00A1); PHY_WRITE(sc, 2, 0x0008); PHY_WRITE(sc, 1, 0x1020); PHY_WRITE(sc, 0, 0x1000); PHY_SETBIT(sc, 4, 0x0800); PHY_CLRBIT(sc, 4, 0x0800); val = (PHY_READ(sc, 4) & 0xFFF) | 0x7000; PHY_WRITE(sc, 4, val); PHY_WRITE(sc, 3, 0xFF41); PHY_WRITE(sc, 2, 0xDE60); PHY_WRITE(sc, 1, 0x0140); PHY_WRITE(sc, 0, 0x0077); val = (PHY_READ(sc, 4) & 0xFFF) | 0xA000; PHY_WRITE(sc, 4, val); PHY_WRITE(sc, 3, 0xDF01); PHY_WRITE(sc, 2, 0xDF20); PHY_WRITE(sc, 1, 0xFF95); PHY_WRITE(sc, 0, 0xFA00); val = (PHY_READ(sc, 4) & 0xFFF) | 0xB000; PHY_WRITE(sc, 4, val); PHY_WRITE(sc, 3, 0xFF41); PHY_WRITE(sc, 2, 0xDE20); PHY_WRITE(sc, 1, 0x0140); PHY_WRITE(sc, 0, 0x00BB); val = (PHY_READ(sc, 4) & 0xFFF) | 0xF000; PHY_WRITE(sc, 4, val); PHY_WRITE(sc, 3, 0xDF01); PHY_WRITE(sc, 2, 0xDF20); PHY_WRITE(sc, 1, 0xFF95); PHY_WRITE(sc, 0, 0xBF00); PHY_SETBIT(sc, 4, 0x0800); PHY_CLRBIT(sc, 4, 0x0800); PHY_WRITE(sc, 31, 0x0000); DELAY(40); } void rgephy_reset(struct mii_softc *sc) { mii_phy_reset(sc); DELAY(1000); rgephy_load_dspcode(sc); }