/* $OpenBSD: rlphy.c,v 1.25 2006/11/02 01:27:34 brad Exp $ */ /* * Copyright (c) 1998, 1999 Jason L. Wright (jason@thought.net) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Driver for the internal PHY found on RTL8139 based nics, based * on drivers for the 'exphy' (Internal 3Com phys) and 'nsphy' * (National Semiconductor DP83840). */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include int rlphymatch(struct device *, void *, void *); void rlphyattach(struct device *, struct device *, void *); struct cfattach rlphy_ca = { sizeof(struct mii_softc), rlphymatch, rlphyattach, mii_phy_detach, mii_phy_activate }; struct cfdriver rlphy_cd = { NULL, "rlphy", DV_DULL }; int rlphy_service(struct mii_softc *, struct mii_data *, int); void rlphy_status(struct mii_softc *); const struct mii_phy_funcs rlphy_funcs = { rlphy_service, rlphy_status, mii_phy_reset, }; static const struct mii_phydesc rlphys[] = { { MII_OUI_REALTEK, MII_MODEL_REALTEK_RTL8201L, MII_STR_REALTEK_RTL8201L }, { MII_OUI_ICPLUS, MII_MODEL_ICPLUS_IP101, MII_STR_ICPLUS_IP101 }, { 0, 0, NULL }, }; int rlphymatch(struct device *parent, void *match, void *aux) { struct mii_attach_args *ma = aux; char *devname; devname = parent->dv_cfdata->cf_driver->cd_name; if (mii_phy_match(ma, rlphys) != NULL) return (10); if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 || MII_MODEL(ma->mii_id2) != 0) return (0); if ((strcmp(devname, "re") != 0) && (strcmp(devname, "rl") != 0)) return (0); /* * A "real" phy should get preference, but on the 8139 there * is no phyid register. */ return (5); } void rlphyattach(struct device *parent, struct device *self, void *aux) { struct mii_softc *sc = (struct mii_softc *)self; struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; mpd = mii_phy_match(ma, rlphys); if (mpd != NULL) { printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); } else printf(": RTL internal PHY\n"); sc->mii_inst = mii->mii_instance; sc->mii_phy = ma->mii_phyno; sc->mii_funcs = &rlphy_funcs; sc->mii_pdata = mii; sc->mii_flags = ma->mii_flags; sc->mii_flags |= MIIF_NOISOLATE; PHY_RESET(sc); sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; if (sc->mii_capabilities & BMSR_MEDIAMASK) mii_phy_add_media(sc); } int rlphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; if ((sc->mii_dev.dv_flags & DVF_ACTIVE) == 0) return (ENXIO); /* * Can't isolate the RTL8139 phy, so it has to be the only one. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) panic("rlphy_service: attempt to isolate phy"); switch (cmd) { case MII_POLLSTAT: break; case MII_MEDIACHG: /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: /* * If we're already in auto mode, just return. */ if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN) return (0); (void) mii_phy_auto(sc, 0); break; case IFM_100_T4: /* * XXX Not supported as a manual setting right now. */ return (EINVAL); default: /* * BMCR data is stored in the ifmedia entry. */ PHY_WRITE(sc, MII_ANAR, mii_anar(ife->ifm_media)); PHY_WRITE(sc, MII_BMCR, ife->ifm_data); } break; case MII_TICK: /* * Is the interface even up? */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) return (0); /* * Only used for autonegotiation. */ if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) break; /* * The RealTek PHY's autonegotiation doesn't need to be * kicked; it continues in the background. */ break; case MII_DOWN: mii_phy_down(sc); return (0); } /* Update the media status. */ mii_phy_status(sc); /* Callback if something changed. */ mii_phy_update(sc, cmd); return (0); } void rlphy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int bmsr, bmcr, anlpar; char *devname; devname = sc->mii_dev.dv_parent->dv_cfdata->cf_driver->cd_name; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); if (bmsr & BMSR_LINK) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(sc, MII_BMCR); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { /* * NWay autonegotiation takes the highest-order common * bit of the ANAR and ANLPAR (i.e. best media advertised * both by us and our link partner). */ if ((bmsr & BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } if ((anlpar = PHY_READ(sc, MII_ANAR) & PHY_READ(sc, MII_ANLPAR))) { if (anlpar & ANLPAR_T4) mii->mii_media_active |= IFM_100_T4; else if (anlpar & ANLPAR_TX_FD) mii->mii_media_active |= IFM_100_TX|IFM_FDX; else if (anlpar & ANLPAR_TX) mii->mii_media_active |= IFM_100_TX; else if (anlpar & ANLPAR_10_FD) mii->mii_media_active |= IFM_10_T|IFM_FDX; else if (anlpar & ANLPAR_10) mii->mii_media_active |= IFM_10_T; else mii->mii_media_active |= IFM_NONE; return; } /* * If the other side doesn't support NWAY, then the * best we can do is determine if we have a 10Mbps or * 100Mbps link. There's no way to know if the link * is full or half duplex, so we default to half duplex * and hope that the user is clever enough to manually * change the media settings if we're wrong. */ /* * The RealTek PHY supports non-NWAY link speed * detection, however it does not report the link * detection results via the ANLPAR or BMSR registers. * (What? RealTek doesn't do things the way everyone * else does? I'm just shocked, shocked I tell you.) * To determine the link speed, we have to do one * of two things: * * - If this is a standalone RealTek RTL8201(L) PHY, * we can determine the link speed by testing bit 0 * in the magic, vendor-specific register at offset * 0x19. * * - If this is a RealTek MAC with integrated PHY, we * can test the 'SPEED10' bit of the MAC's media status * register. */ if (strcmp("rl", devname) == 0) { if (PHY_READ(sc, RL_MEDIASTAT) & RL_MEDIASTAT_SPEED10) mii->mii_media_active |= IFM_10_T; else mii->mii_media_active |= IFM_100_TX; } else { if (PHY_READ(sc, 0x0019) & 0x01) mii->mii_media_active |= IFM_100_TX; else mii->mii_media_active |= IFM_10_T; } } else mii->mii_media_active = ife->ifm_media; }