/* $OpenBSD: berkwdt.c,v 1.8 2014/12/10 12:27:57 mikeb Exp $ */ /* * Copyright (c) 2009 Wim Van Sebroeck * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * Berkshire PCI-PC Watchdog Card Driver * http://www.pcwatchdog.com/ */ #include #include #include #include #include #include #include #include #include struct berkwdt_softc { struct device sc_dev; /* device access through bus space */ bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; /* the timeout period */ int sc_period; }; int berkwdt_match(struct device *, void *, void *); void berkwdt_attach(struct device *, struct device *, void *); int berkwdt_activate(struct device *, int); void berkwdt_start(struct berkwdt_softc *sc); void berkwdt_stop(struct berkwdt_softc *sc); void berkwdt_reload(struct berkwdt_softc *sc); int berkwdt_send_command(struct berkwdt_softc *sc, u_int8_t cmd, int *val); int berkwdt_set_timeout(void *, int); struct cfattach berkwdt_ca = { sizeof(struct berkwdt_softc), berkwdt_match, berkwdt_attach, NULL, berkwdt_activate }; struct cfdriver berkwdt_cd = { NULL, "berkwdt", DV_DULL }; const struct pci_matchid berkwdt_devices[] = { { PCI_VENDOR_PIJNENBURG, PCI_PRODUCT_PIJNENBURG_PCWD_PCI } }; /* PCWD-PCI I/O Port definitions */ #define PCWD_PCI_RELOAD 0x00 /* Re-trigger */ #define PCWD_PCI_CS1 0x01 /* Control Status 1 */ #define PCWD_PCI_CS2 0x02 /* Control Status 2 */ #define PCWD_PCI_WDT_DIS 0x03 /* Watchdog Disable */ #define PCWD_PCI_LSB 0x04 /* Command / Response */ #define PCWD_PCI_MSB 0x05 /* Command/Response LSB */ #define PCWD_PCI_CMD 0x06 /* Command/Response MSB */ /* Port 1 : Control Status #1 */ #define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ #define WD_PCI_TTRP 0x04 /* Temperature Trip status */ #define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temp-trip reset */ /* Port 2 : Control Status #2 */ #define WD_PCI_WDIS 0x10 /* Watchdog Disable */ #define WD_PCI_WRSP 0x40 /* Watchdog wrote response */ /* * According to documentation max. time to process a command for the pci * watchdog card is 100 ms, so we give it 150 ms to do its job. */ #define PCI_CMD_TIMEOUT 150 /* Watchdog's internal commands */ #define CMD_WRITE_WD_TIMEOUT 0x19 int berkwdt_send_command(struct berkwdt_softc *sc, u_int8_t cmd, int *val) { u_int8_t msb; u_int8_t lsb; u_int8_t got_response; int count; msb = *val / 256; lsb = *val % 256; /* Send command with data (data first!) */ bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_LSB, lsb); bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_MSB, msb); bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CMD, cmd); got_response = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CS2); got_response &= WD_PCI_WRSP; for (count = 0; count < PCI_CMD_TIMEOUT && !got_response; count++) { delay(1000); got_response = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CS2); got_response &= WD_PCI_WRSP; } if (got_response) { /* read back response */ lsb = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_LSB); msb = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_MSB); *val = (msb << 8) + lsb; /* clear WRSP bit */ bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CMD); return 1; } return 0; } void berkwdt_start(struct berkwdt_softc *sc) { u_int8_t reg; bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_WDT_DIS, 0x00); delay(1000); reg = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CS2); if (reg & WD_PCI_WDIS) { printf("%s: unable to enable\n", sc->sc_dev.dv_xname); } } void berkwdt_stop(struct berkwdt_softc *sc) { u_int8_t reg; bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_WDT_DIS, 0xa5); delay(1000); bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_WDT_DIS, 0xa5); delay(1000); reg = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CS2); if (!(reg & WD_PCI_WDIS)) { printf("%s: unable to disable\n", sc->sc_dev.dv_xname); } } void berkwdt_reload(struct berkwdt_softc *sc) { bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_RELOAD, 0x42); } int berkwdt_match(struct device *parent, void *match, void *aux) { return (pci_matchbyid((struct pci_attach_args *)aux, berkwdt_devices, sizeof(berkwdt_devices) / sizeof(berkwdt_devices[0]))); } void berkwdt_attach(struct device *parent, struct device *self, void *aux) { struct berkwdt_softc *sc = (struct berkwdt_softc *)self; struct pci_attach_args *const pa = (struct pci_attach_args *)aux; bus_size_t iosize; u_int8_t reg; /* retrieve the I/O region (BAR 0) */ if (pci_mapreg_map(pa, 0x10, PCI_MAPREG_TYPE_IO, 0, &sc->sc_iot, &sc->sc_ioh, NULL, &iosize, 0) != 0) { printf(": couldn't find PCI I/O region\n"); return; } /* Check for reboot by the card */ reg = bus_space_read_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CS1); if (reg & WD_PCI_WTRP) { printf(", warning: watchdog triggered"); if (reg & WD_PCI_TTRP) printf(", overheat detected"); /* clear trip status & LED and keep mode of relay 2 */ reg &= WD_PCI_R2DS; reg |= WD_PCI_WTRP; bus_space_write_1(sc->sc_iot, sc->sc_ioh, PCWD_PCI_CS1, reg); } printf("\n"); /* ensure that the watchdog is disabled */ berkwdt_stop(sc); sc->sc_period = 0; /* register with the watchdog framework */ wdog_register(berkwdt_set_timeout, sc); } int berkwdt_activate(struct device *self, int act) { switch (act) { case DVACT_POWERDOWN: wdog_shutdown(self); break; } return (0); } int berkwdt_set_timeout(void *self, int timeout) { struct berkwdt_softc *sc = self; int new_timeout = timeout; if (timeout == 0) { /* Disable watchdog */ berkwdt_stop(sc); } else { if (sc->sc_period != timeout) { /* Set new timeout */ berkwdt_send_command(sc, CMD_WRITE_WD_TIMEOUT, &new_timeout); } if (sc->sc_period == 0) { /* Enable watchdog */ berkwdt_start(sc); berkwdt_reload(sc); } else { /* Reset timer */ berkwdt_reload(sc); } } sc->sc_period = timeout; return (timeout); }