/* $OpenBSD: bt8370reg.h,v 1.2 2005/08/13 23:52:49 claudio Exp $ */ /* * Copyright (c) 2004,2005 Internet Business Solutions AG, Zurich, Switzerland * Written by: Andre Oppermann * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* Bt8370 Register definitions */ /* Globals */ #define Bt8370_DID 0x000 /* Device Identification */ #define Bt8370_CR0 0x001 /* Primary control register */ #define CR0_RESET 0x80 /* Reset Framer */ #define CR0_E1_FAS 0x00 /* E1 FAS only */ #define CR0_E1_FAS_CRC 0x08 /* E1 FAS+CRC4 */ #define CR0_T1_SF 0x09 /* T1 SF */ #define CR0_T1_ESF 0x1A /* T1 ESF+ForceCRC */ #define Bt8370_JAT_CR 0x002 /* Jitter attenuator conf */ #define JAT_CR_JEN 0x80 /* Jitter anntenuator enable */ #define JAT_CR_JFREE 0x40 /* Free running JCLK and CLADO */ #define JAT_CR_JDIR_TX 0x00 /* JAT in TX direction */ #define JAT_CR_JDIR_RX 0x20 /* JAT in RC direction */ #define JAT_CR_JAUTO 0x10 /* JCLK Acceleration */ #define JAT_CR_CENTER 0x80 /* Force JAT to center */ #define JAT_CR_JSIZE8 0x00 /* Elastic store size 8 bits */ #define JAT_CR_JSIZE16 0x01 /* Elastic store size 16 bits */ #define JAT_CR_JSIZE32 0x02 /* Elastic store size 32 bits */ #define JAT_CR_JSIZE64 0x03 /* Elastic store size 64 bits */ #define JAT_CR_JSIZE128 0x04 /* Elastic store size 128 bits */ #define Bt8370_IRR 0x003 /* Interrupt request register */ /* Interrupt Status */ #define Bt8370_ISR7 0x004 /* Alarm 1 Interrupt Status */ #define Bt8370_ISR6 0x005 /* Alarm 2 Interrupt Status */ #define Bt8370_ISR5 0x006 /* Error Interrupt Status */ #define Bt8370_ISR4 0x007 /* Counter Overflow Interrupt Status */ #define Bt8370_ISR3 0x008 /* Timer Interrupt Status */ #define Bt8370_ISR2 0x009 /* Data Link 1 Interrupt Status */ #define Bt8370_ISR1 0x00A /* Data Link 2 Interrupt Status */ #define Bt8370_ISR0 0x00B /* Pattern Interrupt Status */ /* Interrupt Enable */ #define Bt8370_IER7 0x00C /* Alarm 1 Interrupt Enable register */ #define Bt8370_IER6 0x00D /* Alarm 2 Interrupt Enable register */ #define Bt8370_IER5 0x00E /* Error Interrupt Enable register */ #define Bt8370_IER4 0x00F /* Count Overflow Interrupt Enable register */ #define Bt8370_IER3 0x010 /* Timer Interrupt Enable register */ #define Bt8370_IER2 0x011 /* Data Link 1 Interrupt Enable register */ #define Bt8370_IER1 0x012 /* Date Link 2 Interrupt Enable register */ #define Bt8370_IER0 0x013 /* Pattern Interrupt Enable register */ /* Primary */ #define Bt8370_LOOP 0x014 /* Loopback Configuration register */ #define LOOP_PLOOP 0x08 /* Remote Payload Loopback */ #define LOOP_LLOOP 0x04 /* Remote Line Loopback */ #define LOOP_FLOOP 0x02 /* Local Framer Loopback */ #define LOOP_ALOOP 0x01 /* Local Analog Loopback */ #define Bt8370_DL3_TS 0x015 /* External Data Link Channel */ #define Bt8370_DL3_BIT 0x016 /* External Data Link Bit */ #define Bt8370_FSTAT 0x017 /* Offline Framer Status */ #define FSTAT_INVALID 0x10 /* No candidate */ #define FSTAT_FOUND 0x08 /* Frame Search Successful */ #define FSTAT_TIMEOUT 0x04 /* Framer Search Timeout */ #define FSTAT_ACTIVE 0x02 /* Framer Active */ #define FSTAT_RXTXN 0x01 /* RX/TX Reframe Operation */ #define Bt8370_PIO 0x018 /* Programmable Input/Output */ #define PIO_ONESEC_IO 0x80 /* */ #define PIO_RDL_IO 0x40 /* */ #define PIO_TDL_IO 0x20 /* */ #define PIO_INDY_IO 0x10 /* */ #define PIO_RFSYNC_IO 0x08 /* */ #define PIO_RMSYNC_IO 0x04 /* */ #define PIO_TFSYNC_IO 0x02 /* */ #define PIO_TMSYNC_IO 0x01 /* */ #define Bt8370_POE 0x019 /* Programmable Output Enable */ #define POE_TDL_OE 0x20 /* */ #define POE_RDL_OE 0x10 /* */ #define POE_INDY_OE 0x08 /* */ #define POE_TCKO_OE 0x04 /* */ #define POE_CLADO_OE 0x02 /* */ #define POE_RCKO_OE 0x01 /* */ #define Bt8370_CMUX 0x01A /* Clock Input Mux */ #define CMUX_RSBCKI_RSBCKI 0x00 /* */ #define CMUX_RSBCKI_TSBCKI 0x40 /* */ #define CMUX_RSBCKI_CLADI 0x80 /* */ #define CMUX_RSBCKI_CLADO 0xC0 /* */ #define CMUX_TSBCKI_TSBCKI 0x00 /* */ #define CMUX_TSBCKI_RSBCKI 0x10 /* */ #define CMUX_TSBCKI_CLADI 0x20 /* */ #define CMUX_TSBCKI_CLADO 0x30 /* */ #define CMUX_CLADI_CLADI 0x00 /* */ #define CMUX_CLADI_RCKO 0x04 /* */ #define CMUX_CLADI_TSBCKI 0x08 /* */ #define CMUX_CLADI_TCKI 0x0C /* */ #define CMUX_TCKI_TCKI 0x00 /* */ #define CMUX_TCKI_RCKO 0x01 /* */ #define CMUX_TCKI_RSBCKI 0x02 /* */ #define CMUX_TCKI_CLADO 0x03 /* */ #define Bt8370_TMUX 0x01B /* Test Mux Configuration */ #define Bt8370_TEST 0x01C /* Test Configuration */ /* Receive LIU (RLIU) */ #define Bt8370_LIU_CR 0x020 /* LIU Configuration */ #define LIU_CR_RST_LIU 0x80 /* Reset RLIU */ #define LIU_CR_SQUELCH 0x40 /* Enable Squelch */ #define LIU_CR_FORCE_VGA 0x20 /* Internal Variable Gain Amp */ #define LIU_CR_RDIGI 0x10 /* Enable Receive Digital Inputs */ #define LIU_CR_ATTN0 0x00 /* Bridge Attenuation 0db */ #define LIU_CR_ATTN10 0x04 /* Bridge Attenuation -10db */ #define LIU_CR_ATTN20 0x08 /* Bridge Attenuation -20db */ #define LIU_CR_ATTN30 0x0C /* Bridge Attenuation -30db */ #define LIU_CR_MAGIC 0x01 /* This one must be enabled */ #define Bt8370_RSTAT 0x021 /* Receive LIU Status */ #define RSTAT_CPDERR 0x80 /* CLAD Phase detector lost lock */ #define RSTAT_JMPTY 0x40 /* JAT Empty/Full */ #define RSTAT_ZCSUB 0x20 /* ZCS detected */ #define RSTAT_EXZ 0x10 /* Excessive Zeros */ #define RSTAT_BPV 0x08 /* Bipolar Violations */ #define RSTAT_EYEOPEN 0x02 /* Equalization State */ #define RSTAT_PRE_EQ 0x01 /* Pre-Equalizer Status */ #define Bt8370_RLIU_CR 0x022 /* Receive LIU Configuration */ #define RLIU_CR_FRZ_SHORT 0x80 /* Freeze Equalizer for short lines */ #define RLIU_CR_HI_CLICE 0x40 /* High Clock Slicer Threshold */ #define RLIU_CR_AGC32 0x00 /* AGC Observation Window 32bit */ #define RLIU_CR_AGC128 0x10 /* AGC Observation Window 128bit */ #define RLIU_CR_AGC512 0x20 /* AGC Observation Window 512bit */ #define RLIU_CR_AGC2048 0x30 /* AGC Observation Window 2048bit */ #define RLIU_CR_EQ_FRZ 0x08 /* Freeze EQ Coefficients */ #define RLIU_CR_OOR_BLOCK 0x04 /* Disable automatic RLBO */ #define RLIU_CR_RLBO 0x02 /* Receiver Line Build Out */ #define RLIU_CR_LONG_EYE 0x01 /* Eye Open Timeout 8192bit */ #define Bt8370_LPF 0x023 /* RPLL Low Pass Filter */ #define Bt8370_VGA_MAX 0x024 /* Variable Gain Amplifier Maximum */ #define Bt8370_EQ_DAT 0x025 /* Equalizer Coefficient Data register */ #define Bt8370_EQ_PTR 0x026 /* Equalizer Coefficient Table Pointer */ #define Bt8370_DSLICE 0x027 /* Data Slicer Threshold */ #define Bt8370_EQ_OUT 0x028 /* Equalizer Output Levels */ #define Bt8370_VGA 0x029 /* Variable Gain Amplifier Status */ #define Bt8370_PRE_EQ 0x02A /* Pre-Equalizer */ #define Bt8370_COEFF 0x030 /* -037 *//* LMS Adjusted Equalizer Coefficient Status */ #define Bt8370_GAIN 0x038 /* -03C *//* Equalizer Gain Thresholds */ /* Digital Reveiver (RCVR) */ #define Bt8370_RCR0 0x040 /* Receiver Configuration */ #define RCR0_HDB3 0x00 /* */ #define RCR0_B8ZS 0x00 /* */ #define RCR0_AMI 0x80 /* */ #define RCR0_RABORT 0x40 /* */ #define RCR0_RFORCE 0x20 /* */ #define RCR0_LFA_FAS 0x18 /* 3 consecutive FAS Errors */ #define RCR0_LFA_FASCRC 0x08 /* 3 consecutive FAS or 915 CRC Errors */ #define RCR0_LFA_26F 0x08 /* 2 out of 6 F bit Errors */ #define RCR0_RZCS_BPV 0x00 /* */ #define RCR0_RZCS_NBPV 0x01 /* */ #define Bt8370_RPATT 0x041 /* Receive Test Pattern Configuration */ #define Bt8370_RLB 0x042 /* Receive Loopback Code Detector Configuration */ #define Bt8370_LBA 0x043 /* Loopback Activate Code Pattern */ #define Bt8370_LBD 0x044 /* Loopback Deactivate Code Pattern */ #define Bt8370_RALM 0x045 /* Receive Alarm Signal Configuration */ #define RALM_FSNFAS 0x20 /* Include FS/NFAS in FERR and FRED */ #define Bt8370_LATCH 0x046 /* Alarm/Error/Counter Latch Configuration */ #define LATCH_STOPCNT 0x08 /* Stop Error Counter during RLOF,RLOS,RAIS */ #define Bt8370_ALM1 0x047 /* Alarm 1 Status */ #define ALM1_RMYEL 0x80 /* Receive Multifram Yellow Alarm */ #define ALM1_RYEL 0x40 /* Receive Yellow Alarm */ #define ALM1_RAIS 0x10 /* Reveive Alarm Indication Signal */ #define ALM1_RALOS 0x09 /* Receive Analog Loss of Signal */ #define ALM1_RLOS 0x04 /* Receive Loss of Signal */ #define ALM1_RLOF 0x02 /* Receive Loss of Frame Alignment */ #define ALM1_SIGFRZ 0x01 /* Signalling Freeze */ #define Bt8370_ALM2 0x048 /* Alarm 2 Status */ #define ALM2_LOOPDN 0x80 /* */ #define ALM2_LOOPUP 0x40 /* */ #define ALM2_TSHORT 0x10 /* Transmit Short Circuit */ #define ALM2_TLOC 0x08 /* Transmit Loss of clock */ #define ALM2_TLOF 0x02 /* Transmit Loss of Frame alignment */ #define Bt8370_ALM3 0x049 /* Alarm 3 Status */ #define ALM3_RMAIS 0x40 /* Receive TS16 Alarm Indication */ #define ALM3_SEF 0x20 /* Severely Errored Frame */ #define ALM3_SRED 0x10 /* Loss of CAS Alignment */ #define ALM3_MRED 0x08 /* Loss of MFAS Alignment */ #define ALM3_FRED 0x04 /* Loss of T1/FAS Alignment */ #define ALM3_LOF1 0x02 /* Reason for Loss of Frame Alignment */ #define ALM3_LOF0 0x01 /* Reason for Loss of Frame Alignment */ /* Error/Alarm Counters */ #define Bt8370_FERR_LSB 0x050 /* Framing Bit Error Counter LSB */ #define Bt8370_FERR_MSB 0x051 /* ditto MSB */ #define Bt8370_CERR_LSB 0x052 /* CRC Error Counter LSB */ #define Bt8370_CERR_MSB 0x053 /* ditto MSB */ #define Bt8370_LCV_LSB 0x054 /* Line Code Violation Counter LSB*/ #define Bt8370_LCV_MSB 0x055 /* ditto MSB */ #define Bt8370_FEBE_LSB 0x056 /* Far End Block Error Counter LSB*/ #define Bt8370_FEBE_MSB 0x057 /* ditto MSB */ #define Bt8370_BERR_LSB 0x058 /* PRBS Bit Error Counter LSB */ #define Bt8370_BERR_MSB 0x059 /* ditto MSB */ /* Receive Sa-Byte */ #define Bt8370_RSA4 0x05B /* Receive Sa4 Byte Buffer */ #define Bt8370_RSA5 0x05C /* ditto Sa5 */ #define Bt8370_RSA6 0x05D /* ditto Sa6 */ #define Bt8370_RSA7 0x05E /* ditto Sa7 */ #define Bt8370_RSA8 0x05F /* ditto Sa8 */ /* Transmit LIU (TLIU) */ #define Bt8370_SHAPE 0x060 /* -067 *//* Transmit Pulse Shape Configuration */ #define Bt8370_TLIU_CR 0x068 /* Transmit LIU Configuration */ #define TLIU_CR_120 0x4C /* 120 Ohms, external term */ #define TLIU_CR_100 0x40 /* 100 Ohms, external term */ /* Digital Transmitter (XMTR) */ #define Bt8370_TCR0 0x070 /* Transmit Framer Configuration */ #define TCR0_FAS 0x00 /* FAS Only */ #define TCR0_MFAS 0x04 /* FAS + MFAS*/ #define TCR0_SF 0x04 /* SF Only */ #define TCR0_ESF 0x01 /* ESF Only */ #define TCR0_ESFCRC 0x0D /* ESF + Force CRC */ #define Bt8370_TCR1 0x071 /* Transmitter Configuration */ #define TCR1_TABORT 0x40 /* Disable TX Offline Framer */ #define TCR1_TFORCE 0x20 /* Force TX Reframe */ #define TCR1_HDB3 0x01 /* Line code HDB3 */ #define TCR1_B8ZS 0x01 /* Line code B8ZS */ #define TCR1_AMI 0x00 /* Line code AMI */ #define TCR1_3FAS 0x10 /* 3 consecutive FAS Errors */ #define TCR1_26F 0x10 /* 2 out of 6 Frame Bit Errors */ #define Bt8370_TFRM 0x072 /* Transmit Frame Format */ #define TFRM_MYEL 0x20 /* Insert MultiFrame Yellow Alarm */ #define TFRM_YEL 0x10 /* Insert Yellow Alarm */ #define TFRM_MF 0x08 /* Insert MultiFrame Alignment */ #define TFRM_FE 0x04 /* Insert FEBE */ #define TFRM_CRC 0x02 /* Insert CRC4 */ #define TFRM_FBIT 0x01 /* Insert F bit or FAS/NAS alignment */ #define Bt8370_TERROR 0x073 /* Transmit Error Insert */ #define Bt8370_TMAN 0x074 /* Transmit Manual Sa-Byte/FEBE Configuration */ #define TMAN_MALL 0xF8 /* All Sa Bytes Manual */ #define Bt8370_TALM 0x075 /* Transmit Alarm Signal Configuration */ #define TALM_AMYEL 0x20 /* Automatic MultiFrame Yellow Alarm transmit */ #define TALM_AYEL 0x10 /* Automatic Yellow Alarm transmit */ #define TALM_AAIS 0x08 /* Automatic AIS Alarm transmit */ #define Bt8370_TPATT 0x076 /* Transmit Test Pattern Configuration */ #define Bt8370_TLB 0x077 /* Transmit Inband Loopback Code Configuration */ #define Bt8370_LBP 0x078 /* Transmit Inband Loopback Code Pattern */ /* Transmit Sa-Byte */ #define Bt8370_TSA4 0x07B /* Transmit Sa4 Byte Buffer */ #define Bt8370_TSA5 0x07C /* ditto Sa5 */ #define Bt8370_TSA6 0x07D /* ditto Sa6 */ #define Bt8370_TSA7 0x07E /* ditto Sa7 */ #define Bt8370_TSA8 0x07F /* ditto Sa8 */ /* Clock Rate Adapter (CLAD) */ #define Bt8370_CLAD_CR 0x090 /* Clock Rate Adapter Configuration */ #define CLAD_CR_CEN 0x80 /* Enable CLAD phase detector */ #define CLAD_CR_XSEL_1X 0x00 /* Line rate multiplier 1X */ #define CLAD_CR_XSEL_2X 0x10 /* Line rate multiplier 2X */ #define CLAD_CR_XSEL_4X 0x20 /* Line rate multiplier 4X */ #define CLAD_CR_XSEL_8X 0x30 /* Line rate multiplier 8X */ #define CLAD_CR_LFGAIN 0x05 /* Loop filter gain */ #define Bt8370_CSEL 0x091 /* CLAD Frequency Select */ #define CSEL_VSEL_1536 0x60 /* 1536kHz */ #define CSEL_VSEL_1544 0x50 /* 1544kHz */ #define CSEL_VSEL_2048 0x10 /* 2048kHz */ #define CSEL_VSEL_4096 0x20 /* 4096kHz */ #define CSEL_VSEL_8192 0x30 /* 8192kHz */ #define CSEL_OSEL_1536 0x06 /* 1536kHz */ #define CSEL_OSEL_1544 0x05 /* 1544kHz */ #define CSEL_OSEL_2048 0x01 /* 2048kHz */ #define CSEL_OSEL_4096 0x02 /* 4096kHz */ #define CSEL_OSEL_8192 0x03 /* 8192kHz */ #define Bt8370_CPHASE 0x092 /* CLAD Phase Detector Scale Factor */ #define Bt8370_CTEST 0x093 /* CLAD Test */ /* Bit Oriented Protocol Transceiver (BOP) */ #define Bt8370_BOP 0x0A0 /* Bit Oriented Protocol Transceiver */ #define Bt8370_TBOP 0x0A1 /* Transmit BOP Code Word */ #define Bt8370_RBOP 0x0A2 /* Receive BOP Code Word */ #define Bt8370_BOP_STAT 0x0A3 /* BOP Status */ /* Data Link #1 */ #define Bt8370_DL1_TS 0x0A4 /* DL1 Time Slot Enable */ #define Bt8370_DL1_BIT 0x0A5 /* DL1 Bit Enable */ #define Bt8370_DL1_CTL 0x0A6 /* DL1 Control */ #define Bt8370_RDL1_FFC 0x0A7 /* RDL #1 FIFO Fill Control */ #define Bt8370_RDL1 0x0A8 /* Receive Data Link FIFO #1 */ #define Bt8370_RDL1_STAT 0x0A9 /* RDL #1 Status */ #define Bt8370_PRM1 0x0AA /* Performance Report Message */ #define Bt8370_TDL1_FEC 0x0AB /* TDL #1 FIFO Empty Control */ #define Bt8370_TDL1_EOM 0x0AC /* TDL #1 End of Message Control */ #define Bt8370_TDL1 0x0AD /* Transmit Data Link FIFO #1*/ #define Bt8370_TDL1_STAT 0x0AE /* TDL #1 Status */ /* Data Link #2 */ #define Bt8370_DL2_TS 0x0AF /* DL2 Time Slot Enable */ #define Bt8370_DL2_BIT 0x0B0 /* DL2 Bit Enable */ #define Bt8370_DL2_CTL 0x0B1 /* DL2 Control */ #define Bt8370_RDL2_FFC 0x0B2 /* RDL #2 FIFO Fill Control */ #define Bt8370_RDL2 0x0B3 /* Receive Data Link FIFO #2 */ #define Bt8370_RDL2_STAT 0x0B4 /* RDL #2 Status */ #define Bt8370_TDL2_FEC 0x0B6 /* TDL #2 FIFO Empty Control */ #define Bt8370_TDL2_EOM 0x0B7 /* TDL #2 End of Message Control */ #define Bt8370_TDL2 0x0B8 /* Transmit Data Link FIFO #2*/ #define Bt8370_TDL2_STAT 0x0B9 /* TDL #2 Status */ /* Test */ #define Bt8370_TEST1 0x0BA /* DLINK Test Configuration */ #define Bt8370_TEST2 0x0BB /* DLINK Test Status */ #define Bt8370_TEST3 0x0BC /* DLINK Test Status */ #define Bt8370_TEST4 0x0BD /* DLINK Test Control #1 or Configuration #2 */ #define Bt8370_TEST5 0x0BE /* DLINK Test Control #2 or Configuration #2 */ /* System Bus Interface (SBI) */ #define Bt8370_SBI_CR 0x0D0 /* System Bus Interface Configuration */ #define SBI_CR_X2CLK 0x80 /* Times 2 clock */ #define SBI_CR_SBI_OE 0x40 /* Enable SBI */ #define SBI_CR_1536 0x08 /* 1536, 24TS*/ #define SBI_CR_1544 0x07 /* 1544, 24TS + F bit */ #define SBI_CR_2048 0x06 /* 2048, 32TS */ #define SBI_CR_4096_A 0x04 /* 4096 Group A */ #define SBI_CR_4096_B 0x05 /* 4096 Group B */ #define SBI_CR_8192_A 0x00 /* 8192 Group A */ #define SBI_CR_8192_B 0x01 /* 8192 Group B */ #define SBI_CR_8192_C 0x02 /* 8192 Group C */ #define SBI_CR_8192_D 0x03 /* 8192 Group D */ #define Bt8370_RSB_CR 0x0D1 /* Receive System Bus Configuration */ #define RSB_CR_BUS_RSB 0x80 /* Multiple devices on bus */ #define RSB_CR_SIG_OFF 0x40 /* Inhibit RPCMO Signal reinsertion */ #define RSB_CR_RPCM_NEG 0x20 /* RSB falling edge */ #define RSB_CR_RSYN_NEG 0x10 /* RFSYNC falling edge */ #define RSB_CR_BUS_FRZ 0x08 /* Multiple devices on bus */ #define RSB_CR_RSB_CTR 0x04 /* Force RSLIP Center */ #define RSB_CR_RSBI_NORMAL 0x00 /* Normal Slip Buffer Mode */ #define RSB_CR_RSBI_ELASTIC 0x02 /* Receive Slip Buffer Elastic Mode */ #define RSB_CR_RSBI_BYPASS 0x03 /* Bypass Slip Buffer */ #define Bt8370_RSYNC_BIT 0x0D2 /* Receive System Bus Sync Bit Offset */ #define Bt8370_RSYNC_TS 0x0D3 /* Receive System Bus Sync Time Slot Offset */ #define Bt8370_TSB_CR 0x0D4 /* Transmit System Bus Configuration */ #define TSB_CR_BUS_TSB 0x80 /* Bused TSB output */ #define TSB_CR_TPCM_NEG 0x20 /* TINDO falling edge */ #define TSB_CR_TSYN_NEG 0x10 /* TFSYNC falling edge */ #define TSB_CR_TSB_CTR 0x04 /* Force TSLIP Center */ #define TSB_CR_TSB_NORMAL 0x00 /* Normal Slip Buffer Mode */ #define TSB_CR_TSB_ELASTIC 0x02 /* Send Slip Buffer Elastic Mode */ #define TSB_CR_TSB_BYPASS 0x03 /* Bypass Slip Buffer */ #define Bt8370_TSYNC_BIT 0x0D5 /* Transmit System Bus Sync Bit Offset */ #define Bt8370_TSYNC_TS 0x0D6 /* Transmit System Bus Sync Time Slot Offset */ #define Bt8370_RSIG_CR 0x0D7 /* Receive Signaling Configuration */ #define RSIG_CR_FRZ_OFF 0x04 /* Manual Signaling Update FRZ */ #define RSIG_CR_THRU 0x01 /* Transparent Robbed Bit Signaling */ #define Bt8370_RSYNC_FRM 0x0D8 /* Signaling Reinsertion Frame Offset */ #define Bt8370_SSTAT 0x0D9 /* Slip Buffer Status */ #define SSTAT_TSDIR 0x80 /* Transmit Slip Direction */ #define SSTAT_TFSLIP 0x40 /* Controlled Slip Event */ #define SSTAT_TUSLIP 0x20 /* Uncontrolled Slip Event */ #define SSTAT_RSDIR 0x08 /* Receive Slip Direction */ #define SSTAT_RFSLIP 0x04 /* Controlled Slip Event */ #define SSTAT_RUSLIP 0x02 /* Uncontrolled Slip Event */ #define Bt8370_STACK 0x0DA /* Receive Signaling Stack */ #define Bt8370_RPHASE 0x0DB /* RSLIP Phase Status */ #define Bt8370_TPHASE 0x0DC /* TSLIP Phase Status */ #define Bt8370_PERR 0x0DD /* RAM Parity Status */ #define Bt8370_SBCn 0x0E0 /* -0FF *//* System Bus Per-Channel Control */ #define SBCn_INSERT 0x40 /* Insert RX Signaling on RPCMO */ #define SBCn_SIG_LP 0x20 /* Local Signaling Loopback */ #define SBCn_RLOOP 0x10 /* Local Loopback */ #define SBCn_RINDO 0x08 /* Activate RINDO time slot indicator */ #define SBCn_TINDO 0x04 /* Activate TINDO time slot indicator */ #define SBCn_TSIG_AB 0x02 /* AB Signaling */ #define SBCn_ASSIGN 0x01 /* Enable System Bus Time Slot */ /* Buffer Memory */ #define Bt8370_TPCn 0x100 /* Transmit Per-Channel Control */ #define TPCn_CLEAR 0x00 /* Clear Channel Mode */ #define TPCn_EMFBIT 0x80 /* TB7ZS/EMFBIT */ #define TPCn_TLOOP 0x40 /* Remote DS0 Channel Loopback */ #define TPCn_TIDLE 0x20 /* Transmit Idle */ #define TPCn_TLOCAL 0x10 /* Transmit Local Signaling */ #define TPCn_TSIGA 0x08 /* ABCD signaling value */ #define TPCn_TSIGB 0x04 /* ABCD signaling value */ #define TPCn_TSIGC 0x02 /* ABCD signaling value */ #define TPCn_TSIGD 0x01 /* ABCD signaling value */ #define TPCn_TSIGO TPCn_TSIGA /* Transmit Signaling Output */ #define TPCn_RSIGO TPCn_TSIGB /* Receive Signaling Output */ #define Bt8370_TSIGn 0x120 /* Transmit Signaling Buffer */ #define Bt8370_TSLIP_LOn 0x140 /* Transmit PCM Slip Buffer */ #define Bt8370_TSLIP_HIn 0x160 /* Transmit PCM Slip Buffer */ #define Bt8370_RPCn 0x180 /* Receive Per-Channel Control */ #define RPCn_CLEAR 0x00 /* Clear Channel Mode */ #define RPCn_RSIG_AB 0x80 /* AB Signaling */ #define RPCn_RIDLE 0x40 /* Time Slot Idle */ #define RPCn_SIG_STK 0x20 /* Receive Signal Stack */ #define RPCn_RLOCAL 0x10 /* Enable Local Signaling Output */ #define RPCn_RSIGA 0x08 /* Local Receive Signaling */ #define RPCn_RSIGB 0x04 /* Local Receive Signaling */ #define RPCn_RSIGC 0x02 /* Local Receive Signaling */ #define RPCn_RSIGD 0x01 /* Local Receive Signaling */ #define Bt8370_RSIGn 0x1A0 /* Receive Signaling Buffer */ #define Bt8370_RSLIP_LOn 0x1C0 /* Receive PCM Slip Buffer */ #define Bt8370_RSLIP_HIn 0x1E0 /* Receive PCM Slip Buffer */