/* $OpenBSD: cs4281.c,v 1.40 2022/02/16 06:21:19 anton Exp $ */ /* $Tera: cs4281.c,v 1.18 2000/12/27 14:24:45 tacha Exp $ */ /* * Copyright (c) 2000 Tatoku Ogaito. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Tatoku Ogaito * for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Cirrus Logic CS4281 driver. * Data sheets can be found * http://www.cirrus.com/pubs/4281.pdf?DocumentID=30 * ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf * * TODO: * 1: midi and FM support */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define CSCC_PCI_BA0 0x10 #define CSCC_PCI_BA1 0x14 struct cs4281_dma { bus_dmamap_t map; caddr_t addr; /* real dma buffer */ bus_dma_segment_t segs[1]; int nsegs; size_t size; struct cs4281_dma *next; }; #define DMAADDR(p) ((p)->map->dm_segs[0].ds_addr) #define KERNADDR(p) ((void *)((p)->addr)) /* * Software state */ struct cs4281_softc { struct device sc_dev; pci_intr_handle_t *sc_ih; /* I/O (BA0) */ bus_space_tag_t ba0t; bus_space_handle_t ba0h; /* BA1 */ bus_space_tag_t ba1t; bus_space_handle_t ba1h; /* DMA */ bus_dma_tag_t sc_dmatag; struct cs4281_dma *sc_dmas; /* playback */ void (*sc_pintr)(void *); /* dma completion intr handler */ void *sc_parg; /* arg for sc_intr() */ int (*halt_output)(void *); #ifdef DIAGNOSTIC char sc_prun; #endif /* capturing */ void (*sc_rintr)(void *); /* dma completion intr handler */ void *sc_rarg; /* arg for sc_intr() */ int sc_rparam; /* record format */ int (*halt_input)(void *); #ifdef DIAGNOSTIC char sc_rrun; #endif #if NMIDI > 0 void (*sc_iintr)(void *, int); /* midi input ready handler */ void (*sc_ointr)(void *); /* midi output ready handler */ void *sc_arg; #endif /* AC97 CODEC */ struct ac97_codec_if *codec_if; struct ac97_host_if host_if; /* Power Management */ u_int16_t ac97_reg[CS4281_SAVE_REG_MAX + 1]; /* Save ac97 registers */ }; #define BA0READ4(sc, r) bus_space_read_4((sc)->ba0t, (sc)->ba0h, (r)) #define BA0WRITE4(sc, r, x) bus_space_write_4((sc)->ba0t, (sc)->ba0h, (r), (x)) #if defined(ENABLE_SECONDARY_CODEC) #define MAX_CHANNELS (4) #define MAX_FIFO_SIZE 32 /* 128/4 channels */ #else #define MAX_CHANNELS (2) #define MAX_FIFO_SIZE 64 /* 128/2 channels */ #endif /* * Hardware imposes the buffer size to be twice the block size, this * is OK, except that round_blocksize() is the only mean to expose * this hardware constraint but it doesn't know the buffer size. * * So we've no other choice than hardcoding a buffer size */ #define DMA_SIZE (1024 * 4 * 2) #define DMA_ALIGN 0x10 int cs4281_match(struct device *, void *, void *); void cs4281_attach(struct device *, struct device *, void *); int cs4281_activate(struct device *, int); int cs4281_intr(void *); int cs4281_set_params(void *, int, int, struct audio_params *, struct audio_params *); int cs4281_halt_output(void *); int cs4281_halt_input(void *); int cs4281_trigger_output(void *, void *, void *, int, void (*)(void *), void *, struct audio_params *); int cs4281_trigger_input(void *, void *, void *, int, void (*)(void *), void *, struct audio_params *); u_int8_t cs4281_sr2regval(int); void cs4281_set_dac_rate(struct cs4281_softc *, int); void cs4281_set_adc_rate(struct cs4281_softc *, int); int cs4281_init(struct cs4281_softc *); int cs4281_open(void *, int); void cs4281_close(void *); int cs4281_round_blocksize(void *, int); int cs4281_get_props(void *); int cs4281_attach_codec(void *, struct ac97_codec_if *); int cs4281_read_codec(void *, u_int8_t , u_int16_t *); int cs4281_write_codec(void *, u_int8_t, u_int16_t); void cs4281_reset_codec(void *); int cs4281_mixer_set_port(void *, mixer_ctrl_t *); int cs4281_mixer_get_port(void *, mixer_ctrl_t *); int cs4281_query_devinfo(void *, mixer_devinfo_t *); void *cs4281_malloc(void *, int, size_t, int, int); size_t cs4281_round_buffersize(void *, int, size_t); void cs4281_free(void *, void *, int); int cs4281_allocmem(struct cs4281_softc *, size_t, int, int, struct cs4281_dma *); int cs4281_src_wait(struct cs4281_softc *); #if defined(CS4281_DEBUG) #undef DPRINTF #undef DPRINTFN #define DPRINTF(x) if (cs4281_debug) printf x #define DPRINTFN(n,x) if (cs4281_debug>(n)) printf x int cs4281_debug = 5; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif struct audio_hw_if cs4281_hw_if = { cs4281_open, cs4281_close, cs4281_set_params, cs4281_round_blocksize, NULL, NULL, NULL, NULL, NULL, cs4281_halt_output, cs4281_halt_input, NULL, NULL, cs4281_mixer_set_port, cs4281_mixer_get_port, cs4281_query_devinfo, cs4281_malloc, cs4281_free, cs4281_round_buffersize, cs4281_get_props, cs4281_trigger_output, cs4281_trigger_input }; #if NMIDI > 0 /* Midi Interface */ void cs4281_midi_close(void *); void cs4281_midi_getinfo(void *, struct midi_info *); int cs4281_midi_open(void *, int, void (*)(void *, int), void (*)(void *), void *); int cs4281_midi_output(void *, int); struct midi_hw_if cs4281_midi_hw_if = { cs4281_midi_open, cs4281_midi_close, cs4281_midi_output, cs4281_midi_getinfo, 0, }; #endif struct cfattach clct_ca = { sizeof(struct cs4281_softc), cs4281_match, cs4281_attach, NULL, cs4281_activate }; struct cfdriver clct_cd = { NULL, "clct", DV_DULL }; int cs4281_match(struct device *parent, void *match, void *aux) { struct pci_attach_args *pa = (struct pci_attach_args *)aux; if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS || PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_CIRRUS_CS4281) return (0); return (1); } void cs4281_attach(struct device *parent, struct device *self, void *aux) { struct cs4281_softc *sc = (struct cs4281_softc *)self; struct pci_attach_args *pa = (struct pci_attach_args *)aux; pci_chipset_tag_t pc = pa->pa_pc; char const *intrstr; pci_intr_handle_t ih; /* Map I/O register */ if (pci_mapreg_map(pa, CSCC_PCI_BA0, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &sc->ba0t, &sc->ba0h, NULL, NULL, 0)) { printf("%s: can't map BA0 space\n", sc->sc_dev.dv_xname); return; } if (pci_mapreg_map(pa, CSCC_PCI_BA1, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &sc->ba1t, &sc->ba1h, NULL, NULL, 0)) { printf("%s: can't map BA1 space\n", sc->sc_dev.dv_xname); return; } sc->sc_dmatag = pa->pa_dmat; /* * Set Power State D0. * Without doing this, 0xffffffff is read from all registers after * using Windows and rebooting into OpenBSD. * On my IBM ThinkPad X20, it is set to D3 after using Windows2000. */ pci_set_powerstate(pc, pa->pa_tag, PCI_PMCSR_STATE_D0); /* Map and establish the interrupt. */ if (pci_intr_map(pa, &ih)) { printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO | IPL_MPSAFE, cs4281_intr, sc, sc->sc_dev.dv_xname); if (sc->sc_ih == NULL) { printf("%s: couldn't establish interrupt",sc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf(": %s\n", intrstr); /* * Sound System start-up */ if (cs4281_init(sc) != 0) return; sc->halt_input = cs4281_halt_input; sc->halt_output = cs4281_halt_output; /* AC 97 attachment */ sc->host_if.arg = sc; sc->host_if.attach = cs4281_attach_codec; sc->host_if.read = cs4281_read_codec; sc->host_if.write = cs4281_write_codec; sc->host_if.reset = cs4281_reset_codec; if (ac97_attach(&sc->host_if) != 0) { printf("%s: ac97_attach failed\n", sc->sc_dev.dv_xname); return; } audio_attach_mi(&cs4281_hw_if, sc, NULL, &sc->sc_dev); #if NMIDI > 0 midi_attach_mi(&cs4281_midi_hw_if, sc, &sc->sc_dev); #endif } int cs4281_intr(void *p) { struct cs4281_softc *sc = p; u_int32_t intr, val; mtx_enter(&audio_lock); intr = BA0READ4(sc, CS4281_HISR); if (!(intr & (HISR_DMA0 | HISR_DMA1 | HISR_MIDI))) { BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); mtx_leave(&audio_lock); return (-1); } DPRINTF(("cs4281_intr:")); if (intr & HISR_DMA0) val = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */ if (intr & HISR_DMA1) val = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */ BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); /* Playback Interrupt */ if (intr & HISR_DMA0) { DPRINTF((" PB DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA0), (int)BA0READ4(sc, CS4281_DCC0))); if (sc->sc_pintr) { sc->sc_pintr(sc->sc_parg); } else { #ifdef DIAGNOSTIC printf("%s: unexpected play intr\n", sc->sc_dev.dv_xname); #endif } } if (intr & HISR_DMA1) { val = BA0READ4(sc, CS4281_HDSR1); /* copy from dma */ DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1), (int)BA0READ4(sc, CS4281_DCC1))); if (sc->sc_rintr) { sc->sc_rintr(sc->sc_rarg); } else { #ifdef DIAGNOSTIC printf("%s: unexpected record intr\n", sc->sc_dev.dv_xname); #endif } } DPRINTF(("\n")); mtx_leave(&audio_lock); return (1); } int cs4281_set_params(void *addr, int setmode, int usemode, struct audio_params *play, struct audio_params *rec) { struct cs4281_softc *sc = addr; struct audio_params *p; int mode; for (mode = AUMODE_RECORD; mode != -1; mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) { if ((setmode & mode) == 0) continue; p = mode == AUMODE_PLAY ? play : rec; if (p == play) { DPRINTFN(5,("play: samp=%ld precision=%d channels=%d\n", p->sample_rate, p->precision, p->channels)); } else { DPRINTFN(5,("rec: samp=%ld precision=%d channels=%d\n", p->sample_rate, p->precision, p->channels)); } if (p->sample_rate < 6023) p->sample_rate = 6023; if (p->sample_rate > 48000) p->sample_rate = 48000; if (p->precision > 16) p->precision = 16; if (p->channels > 2) p->channels = 2; switch (p->encoding) { case AUDIO_ENCODING_SLINEAR_BE: break; case AUDIO_ENCODING_SLINEAR_LE: break; case AUDIO_ENCODING_ULINEAR_BE: break; case AUDIO_ENCODING_ULINEAR_LE: break; default: return (EINVAL); } p->bps = AUDIO_BPS(p->precision); p->msb = 1; } /* set sample rate */ cs4281_set_dac_rate(sc, play->sample_rate); cs4281_set_adc_rate(sc, rec->sample_rate); return (0); } int cs4281_halt_output(void *addr) { struct cs4281_softc *sc = addr; BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); #ifdef DIAGNOSTIC sc->sc_prun = 0; #endif return (0); } int cs4281_halt_input(void *addr) { struct cs4281_softc *sc = addr; BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); #ifdef DIAGNOSTIC sc->sc_rrun = 0; #endif return (0); } int cs4281_trigger_output(void *addr, void *start, void *end, int blksize, void (*intr)(void *), void *arg, struct audio_params *param) { struct cs4281_softc *sc = addr; u_int32_t fmt = 0; struct cs4281_dma *p; int dma_count; #ifdef DIAGNOSTIC if (sc->sc_prun) printf("cs4281_trigger_output: already running\n"); sc->sc_prun = 1; #endif if ((char *)end - (char *)start != 2 * blksize) { #ifdef DIAGNOSTIC printf("%s: play block size must be half the buffer size\n", sc->sc_dev.dv_xname); #endif return EIO; } DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p " "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); sc->sc_pintr = intr; sc->sc_parg = arg; /* stop playback DMA */ BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); DPRINTF(("param: precision=%d channels=%d encoding=%d\n", param->precision, param->channels, param->encoding)); for (p = sc->sc_dmas; p != NULL && KERNADDR(p) != start; p = p->next) ; if (p == NULL) { printf("cs4281_trigger_output: bad addr %p\n", start); mtx_leave(&audio_lock); return (EINVAL); } dma_count = (char *)end - (char *)start; if (param->precision != 8) dma_count /= 2; /* 16 bit */ if (param->channels > 1) dma_count /= 2; /* Stereo */ DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n", (int)DMAADDR(p), dma_count)); BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p)); BA0WRITE4(sc, CS4281_DBC0, dma_count - 1); /* set playback format */ fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK; if (param->precision == 8) fmt |= DMRn_SIZE8; if (param->channels == 1) fmt |= DMRn_MONO; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_SLINEAR_BE) fmt |= DMRn_BEND; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_ULINEAR_LE) fmt |= DMRn_USIGN; BA0WRITE4(sc, CS4281_DMR0, fmt); /* set sample rate */ cs4281_set_dac_rate(sc, param->sample_rate); /* start DMA */ mtx_enter(&audio_lock); BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK); /* Enable interrupts */ BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); BA0WRITE4(sc, CS4281_PPRVC, 7); BA0WRITE4(sc, CS4281_PPLVC, 7); DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR))); DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR))); DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0))); DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0))); DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0))); DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n", BA0READ4(sc, CS4281_DACSR))); DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA))); DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n", BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN)); mtx_leave(&audio_lock); return (0); } int cs4281_trigger_input(void *addr, void *start, void *end, int blksize, void (*intr)(void *), void *arg, struct audio_params *param) { struct cs4281_softc *sc = addr; struct cs4281_dma *p; u_int32_t fmt = 0; int dma_count; if ((char *)end - (char *)start != 2 * blksize) { #ifdef DIAGNOSTIC printf("%s: rec block size must be half the buffer size\n", sc->sc_dev.dv_xname); #endif return EIO; } #ifdef DIAGNOSTIC if (sc->sc_rrun) printf("cs4281_trigger_input: already running\n"); sc->sc_rrun = 1; #endif DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p " "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); sc->sc_rintr = intr; sc->sc_rarg = arg; /* stop recording DMA */ BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); for (p = sc->sc_dmas; p && KERNADDR(p) != start; p = p->next) ; if (!p) { printf("cs4281_trigger_input: bad addr %p\n", start); return (EINVAL); } dma_count = (char *)end - (char *)start; if (param->precision != 8) dma_count /= 2; if (param->channels > 1) dma_count /= 2; DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n", (int)DMAADDR(p), dma_count)); BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p)); BA0WRITE4(sc, CS4281_DBC1, dma_count-1); /* set recording format */ fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK; if (param->precision == 8) fmt |= DMRn_SIZE8; if (param->channels == 1) fmt |= DMRn_MONO; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_SLINEAR_BE) fmt |= DMRn_BEND; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_ULINEAR_LE) fmt |= DMRn_USIGN; BA0WRITE4(sc, CS4281_DMR1, fmt); /* set sample rate */ cs4281_set_adc_rate(sc, param->sample_rate); /* Start DMA */ mtx_enter(&audio_lock); BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK); /* Enable interrupts */ BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR))); DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR))); DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1))); DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1))); mtx_leave(&audio_lock); return (0); } /* convert sample rate to register value */ u_int8_t cs4281_sr2regval(int rate) { u_int8_t retval; /* We don't have to change here. but anyway ... */ if (rate > 48000) rate = 48000; if (rate < 6023) rate = 6023; switch (rate) { case 8000: retval = 5; break; case 11025: retval = 4; break; case 16000: retval = 3; break; case 22050: retval = 2; break; case 44100: retval = 1; break; case 48000: retval = 0; break; default: retval = 1536000/rate; /* == 24576000/(rate*16) */ } return (retval); } void cs4281_set_dac_rate(struct cs4281_softc *sc, int rate) { BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate)); } void cs4281_set_adc_rate(struct cs4281_softc *sc, int rate) { BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate)); } int cs4281_init(struct cs4281_softc *sc) { int n; u_int16_t data; u_int32_t dat32; /* set "Configuration Write Protect" register to * 0x4281 to allow to write */ BA0WRITE4(sc, CS4281_CWPR, 0x4281); /* * Unset "Full Power-Down bit of Extended PCI Power Management * Control" register to release the reset state. */ dat32 = BA0READ4(sc, CS4281_EPPMC); if (dat32 & EPPMC_FPDN) BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN); /* Start PLL out in known state */ BA0WRITE4(sc, CS4281_CLKCR1, 0); /* Start serial ports out in known state */ BA0WRITE4(sc, CS4281_SERMC, 0); /* Reset codec */ BA0WRITE4(sc, CS4281_ACCTL, 0); delay(50); /* delay 50us */ BA0WRITE4(sc, CS4281_SPMC, 0); delay(100); /* delay 100us */ BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); #if defined(ENABLE_SECONDARY_CODEC) BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); #endif delay(50000); /* XXX: delay 50ms */ /* Turn on Sound System clocks based on ABITCLK */ BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP); delay(50000); /* XXX: delay 50ms */ BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP); /* Set enables for sections that are needed in the SSPM registers */ BA0WRITE4(sc, CS4281_SSPM, SSPM_MIXEN | /* Mixer */ SSPM_CSRCEN | /* Capture SRC */ SSPM_PSRCEN | /* Playback SRC */ SSPM_JSEN | /* Joystick */ SSPM_ACLEN | /* AC LINK */ SSPM_FMEN /* FM */ ); /* Wait for clock stabilization */ n = 0; while ((BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON)) != (CLKCR1_DLLRDY | CLKCR1_CLKON)) { delay(100); if (++n > 1000) return (-1); } /* Enable ASYNC generation */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN); /* Wait for Codec ready. Linux driver wait 50ms here */ n = 0; while((BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY) == 0) { delay(100); if (++n > 1000) return (-1); } #if defined(ENABLE_SECONDARY_CODEC) /* secondary codec ready*/ n = 0; while((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { delay(100); if (++n > 1000) return (-1); } #endif /* Set the serial timing configuration */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait for Codec ready signal */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for Codec ready\n", sc->sc_dev.dv_xname); return -1; } dat32 = BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY; } while (dat32 == 0); /* Enable Valid Frame output on ASDOUT */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN | ACCTL_VFRM); /* Wait until Codec Calibration is finished. Codec register 26h */ n = 0; do { delay(1); if (++n > 1000) { printf("%s: Timeout waiting for Codec calibration\n", sc->sc_dev.dv_xname); return -1; } cs4281_read_codec(sc, AC97_REG_POWER, &data); } while ((data & 0x0f) != 0x0f); /* Set the serial timing configuration again */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait until we've sampled input slots 3 & 4 as valid */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for sampled input slots as valid\n", sc->sc_dev.dv_xname); return -1; } dat32 = BA0READ4(sc, CS4281_ACISV) & (ACISV_ISV3 | ACISV_ISV4); } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); /* Start digital data transfer of audio data to the codec */ BA0WRITE4(sc, CS4281_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); cs4281_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0); cs4281_write_codec(sc, AC97_REG_MASTER_VOLUME, 0); /* Power on the DAC */ cs4281_read_codec(sc, AC97_REG_POWER, &data); cs4281_write_codec(sc, AC97_REG_POWER, data &= 0xfdff); /* Wait until we sample a DAC ready state. * Not documented, but Linux driver does. */ for (n = 0; n < 32; ++n) { delay(1000); cs4281_read_codec(sc, AC97_REG_POWER, &data); if (data & 0x02) break; } /* Power on the ADC */ cs4281_read_codec(sc, AC97_REG_POWER, &data); cs4281_write_codec(sc, AC97_REG_POWER, data &= 0xfeff); /* Wait until we sample ADC ready state. * Not documented, but Linux driver does. */ for (n = 0; n < 32; ++n) { delay(1000); cs4281_read_codec(sc, AC97_REG_POWER, &data); if (data & 0x01) break; } #if 0 /* Initialize SSCR register features */ /* XXX: hardware volume setting */ BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */ #endif /* disable Sound Blaster Pro emulation */ /* XXX: * Cannot set since the documents does not describe which bit is * correspond to SSCR_SB. Since the reset value of SSCR is 0, * we can ignore it.*/ #if 0 BA0WRITE4(sc, CS4281_SSCR, SSCR_SB); #endif /* map AC97 PCM playback to DMA Channel 0 */ /* Reset FEN bit to setup first */ BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc,CS4281_FCR0) & ~FCRn_FEN)); /* *| RS[4:0]/| | *| LS[4:0] | AC97 | Slot Function *|---------+--------+-------------------- *| 0 | 3 | Left PCM Playback *| 1 | 4 | Right PCM Playback *| 2 | 5 | Phone Line 1 DAC *| 3 | 6 | Center PCM Playback *.... * quoted from Table 29(p109) */ dat32 = 0x01 << 24 | /* RS[4:0] = 1 see above */ 0x00 << 16 | /* LS[4:0] = 0 see above */ 0x0f << 8 | /* SZ[6:0] = 15 size of buffer */ 0x00 << 0 ; /* OF[6:0] = 0 offset */ BA0WRITE4(sc, CS4281_FCR0, dat32); BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN); /* map AC97 PCM record to DMA Channel 1 */ /* Reset FEN bit to setup first */ BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc,CS4281_FCR1) & ~FCRn_FEN)); /* *| RS[4:0]/| *| LS[4:0] | AC97 | Slot Function *|---------+------+------------------- *| 10 | 3 | Left PCM Record *| 11 | 4 | Right PCM Record *| 12 | 5 | Phone Line 1 ADC *| 13 | 6 | Mic ADC *.... * quoted from Table 30(p109) */ dat32 = 0x0b << 24 | /* RS[4:0] = 11 See above */ 0x0a << 16 | /* LS[4:0] = 10 See above */ 0x0f << 8 | /* SZ[6:0] = 15 Size of buffer */ 0x10 << 0 ; /* OF[6:0] = 16 offset */ /* XXX: I cannot understand why FCRn_PSH is needed here. */ BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH); BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN); #if 0 /* Disable DMA Channel 2, 3 */ BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc,CS4281_FCR2) & ~FCRn_FEN)); BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc,CS4281_FCR3) & ~FCRn_FEN)); #endif /* Set the SRC Slot Assignment accordingly */ /*| PLSS[4:0]/ *| PRSS[4:0] | AC97 | Slot Function *|-----------+------+---------------- *| 0 | 3 | Left PCM Playback *| 1 | 4 | Right PCM Playback *| 2 | 5 | phone line 1 DAC *| 3 | 6 | Center PCM Playback *| 4 | 7 | Left Surround PCM Playback *| 5 | 8 | Right Surround PCM Playback *...... * *| CLSS[4:0]/ *| CRSS[4:0] | AC97 | Codec |Slot Function *|-----------+------+-------+----------------- *| 10 | 3 |Primary| Left PCM Record *| 11 | 4 |Primary| Right PCM Record *| 12 | 5 |Primary| Phone Line 1 ADC *| 13 | 6 |Primary| Mic ADC *|..... *| 20 | 3 | Sec. | Left PCM Record *| 21 | 4 | Sec. | Right PCM Record *| 22 | 5 | Sec. | Phone Line 1 ADC *| 23 | 6 | Sec. | Mic ADC */ dat32 = 0x0b << 24 | /* CRSS[4:0] Right PCM Record(primary) */ 0x0a << 16 | /* CLSS[4:0] Left PCM Record(primary) */ 0x01 << 8 | /* PRSS[4:0] Right PCM Playback */ 0x00 << 0; /* PLSS[4:0] Left PCM Playback */ BA0WRITE4(sc, CS4281_SRCSA, dat32); /* Set interrupt to occurred at Half and Full terminal * count interrupt enable for DMA channel 0 and 1. * To keep DMA stop, set MSK. */ dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK; BA0WRITE4(sc, CS4281_DCR0, dat32); BA0WRITE4(sc, CS4281_DCR1, dat32); /* Set Auto-Initialize Control enable */ BA0WRITE4(sc, CS4281_DMR0, DMRn_DMA | DMRn_AUTO | DMRn_TR_READ); BA0WRITE4(sc, CS4281_DMR1, DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE); /* Clear DMA Mask in HIMR */ dat32 = BA0READ4(sc, CS4281_HIMR) & 0xfffbfcff; BA0WRITE4(sc, CS4281_HIMR, dat32); return (0); } int cs4281_activate(struct device *self, int act) { struct cs4281_softc *sc = (struct cs4281_softc *)self; int rv = 0; switch (act) { case DVACT_SUSPEND: /* should I powerdown here ? */ cs4281_write_codec(sc, AC97_REG_POWER, CS4281_POWER_DOWN_ALL); break; case DVACT_RESUME: cs4281_init(sc); ac97_resume(&sc->host_if, sc->codec_if); rv = config_activate_children(self, act); break; default: rv = config_activate_children(self, act); break; } return (rv); } void cs4281_reset_codec(void *addr) { struct cs4281_softc *sc; u_int16_t data; u_int32_t dat32; int n; sc = addr; DPRINTFN(3,("cs4281_reset_codec\n")); /* Reset codec */ BA0WRITE4(sc, CS4281_ACCTL, 0); delay(50); /* delay 50us */ BA0WRITE4(sc, CS4281_SPMC, 0); delay(100); /* delay 100us */ BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); #if defined(ENABLE_SECONDARY_CODEC) BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); #endif delay(50000); /* XXX: delay 50ms */ /* Enable ASYNC generation */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN); /* Wait for Codec ready. Linux driver wait 50ms here */ n = 0; while((BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY) == 0) { delay(100); if (++n > 1000) { printf("%s: AC97 codec ready timeout\n", sc->sc_dev.dv_xname); return; } } #if defined(ENABLE_SECONDARY_CODEC) /* secondary codec ready*/ n = 0; while((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { delay(100); if (++n > 1000) return; } #endif /* Set the serial timing configuration */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait for Codec ready signal */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for Codec ready\n", sc->sc_dev.dv_xname); return; } dat32 = BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY; } while (dat32 == 0); /* Enable Valid Frame output on ASDOUT */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN | ACCTL_VFRM); /* Wait until Codec Calibration is finished. Codec register 26h */ n = 0; do { delay(1); if (++n > 1000) { printf("%s: Timeout waiting for Codec calibration\n", sc->sc_dev.dv_xname); return ; } cs4281_read_codec(sc, AC97_REG_POWER, &data); } while ((data & 0x0f) != 0x0f); /* Set the serial timing configuration again */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait until we've sampled input slots 3 & 4 as valid */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for sampled input slots as valid\n", sc->sc_dev.dv_xname); return; } dat32 = BA0READ4(sc, CS4281_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ; } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); /* Start digital data transfer of audio data to the codec */ BA0WRITE4(sc, CS4281_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); } int cs4281_open(void *addr, int flags) { return (0); } void cs4281_close(void *addr) { struct cs4281_softc *sc; sc = addr; (*sc->halt_output)(sc); (*sc->halt_input)(sc); sc->sc_pintr = 0; sc->sc_rintr = 0; } int cs4281_round_blocksize(void *addr, int blk) { return DMA_SIZE / 2; } int cs4281_mixer_set_port(void *addr, mixer_ctrl_t *cp) { struct cs4281_softc *sc; int val; sc = addr; val = sc->codec_if->vtbl->mixer_set_port(sc->codec_if, cp); DPRINTFN(3,("mixer_set_port: val=%d\n", val)); return (val); } int cs4281_mixer_get_port(void *addr, mixer_ctrl_t *cp) { struct cs4281_softc *sc; sc = addr; return (sc->codec_if->vtbl->mixer_get_port(sc->codec_if, cp)); } int cs4281_query_devinfo(void *addr, mixer_devinfo_t *dip) { struct cs4281_softc *sc; sc = addr; return (sc->codec_if->vtbl->query_devinfo(sc->codec_if, dip)); } void * cs4281_malloc(void *addr, int direction, size_t size, int pool, int flags) { struct cs4281_softc *sc; struct cs4281_dma *p; int error; sc = addr; p = malloc(sizeof(*p), pool, flags); if (!p) return (0); error = cs4281_allocmem(sc, size, pool, flags, p); if (error) { free(p, pool, sizeof(*p)); return (0); } p->next = sc->sc_dmas; sc->sc_dmas = p; return (KERNADDR(p)); } void cs4281_free(void *addr, void *ptr, int pool) { struct cs4281_softc *sc; struct cs4281_dma **pp, *p; sc = addr; for (pp = &sc->sc_dmas; (p = *pp) != NULL; pp = &p->next) { if (KERNADDR(p) == ptr) { bus_dmamap_unload(sc->sc_dmatag, p->map); bus_dmamap_destroy(sc->sc_dmatag, p->map); bus_dmamem_unmap(sc->sc_dmatag, p->addr, p->size); bus_dmamem_free(sc->sc_dmatag, p->segs, p->nsegs); *pp = p->next; free(p, pool, sizeof(*p)); return; } } } size_t cs4281_round_buffersize(void *addr, int direction, size_t size) { return (DMA_SIZE); } int cs4281_get_props(void *addr) { int retval; retval = AUDIO_PROP_INDEPENDENT | AUDIO_PROP_FULLDUPLEX; #ifdef MMAP_READY retval |= AUDIO_PROP_MMAP; #endif return (retval); } /* AC97 */ int cs4281_attach_codec(void *addr, struct ac97_codec_if *codec_if) { struct cs4281_softc *sc; DPRINTF(("cs4281_attach_codec:\n")); sc = addr; sc->codec_if = codec_if; return (0); } int cs4281_read_codec(void *addr, u_int8_t ac97_addr, u_int16_t *ac97_data) { struct cs4281_softc *sc; u_int32_t acctl; int n; sc = addr; DPRINTFN(5,("read_codec: add=0x%02x ", ac97_addr)); /* * Make sure that there is not data sitting around from a previous * uncompleted access. */ BA0READ4(sc, CS4281_ACSDA); /* Set up AC97 control registers. */ BA0WRITE4(sc, CS4281_ACCAD, ac97_addr); BA0WRITE4(sc, CS4281_ACCDA, 0); acctl = ACCTL_ESYN | ACCTL_VFRM | ACCTL_CRW | ACCTL_DCV; BA0WRITE4(sc, CS4281_ACCTL, acctl); if (cs4281_src_wait(sc) < 0) { printf("%s: AC97 read prob. (DCV!=0) for add=0x%0x\n", sc->sc_dev.dv_xname, ac97_addr); return 1; } /* wait for valid status bit is active */ n = 0; while ((BA0READ4(sc, CS4281_ACSTS) & ACSTS_VSTS) == 0) { delay(1); while (++n > 1000) { printf("%s: AC97 read fail (VSTS==0) for add=0x%0x\n", sc->sc_dev.dv_xname, ac97_addr); return 1; } } *ac97_data = BA0READ4(sc, CS4281_ACSDA); DPRINTFN(5,("data=0x%04x\n", *ac97_data)); return (0); } int cs4281_write_codec(void *addr, u_int8_t ac97_addr, u_int16_t ac97_data) { struct cs4281_softc *sc; u_int32_t acctl; sc = addr; DPRINTFN(5,("write_codec: add=0x%02x data=0x%04x\n", ac97_addr, ac97_data)); BA0WRITE4(sc, CS4281_ACCAD, ac97_addr); BA0WRITE4(sc, CS4281_ACCDA, ac97_data); acctl = ACCTL_ESYN | ACCTL_VFRM | ACCTL_DCV; BA0WRITE4(sc, CS4281_ACCTL, acctl); if (cs4281_src_wait(sc) < 0) { printf("%s: AC97 write fail (DCV!=0) for add=0x%02x data=" "0x%04x\n", sc->sc_dev.dv_xname, ac97_addr, ac97_data); return (1); } return (0); } int cs4281_allocmem(struct cs4281_softc *sc, size_t size, int pool, int flags, struct cs4281_dma *p) { int error; if (size != DMA_SIZE) { printf("%s: dma size is %zd should be %d\n", sc->sc_dev.dv_xname, size, DMA_SIZE); return ENOMEM; } p->size = size; /* allocate memory for upper audio driver */ error = bus_dmamem_alloc(sc->sc_dmatag, p->size, DMA_ALIGN, 0, p->segs, nitems(p->segs), &p->nsegs, BUS_DMA_NOWAIT); if (error) { printf("%s: unable to allocate dma. error=%d\n", sc->sc_dev.dv_xname, error); return (error); } error = bus_dmamem_map(sc->sc_dmatag, p->segs, p->nsegs, p->size, &p->addr, BUS_DMA_NOWAIT|BUS_DMA_COHERENT); if (error) { printf("%s: unable to map dma, error=%d\n", sc->sc_dev.dv_xname, error); goto free; } error = bus_dmamap_create(sc->sc_dmatag, p->size, 1, p->size, 0, BUS_DMA_NOWAIT, &p->map); if (error) { printf("%s: unable to create dma map, error=%d\n", sc->sc_dev.dv_xname, error); goto unmap; } error = bus_dmamap_load(sc->sc_dmatag, p->map, p->addr, p->size, NULL, BUS_DMA_NOWAIT); if (error) { printf("%s: unable to load dma map, error=%d\n", sc->sc_dev.dv_xname, error); goto destroy; } return (0); destroy: bus_dmamap_destroy(sc->sc_dmatag, p->map); unmap: bus_dmamem_unmap(sc->sc_dmatag, p->addr, p->size); free: bus_dmamem_free(sc->sc_dmatag, p->segs, p->nsegs); return (error); } int cs4281_src_wait(struct cs4281_softc *sc) { int n; n = 0; while ((BA0READ4(sc, CS4281_ACCTL) & ACCTL_DCV)) { delay(1000); if (++n > 1000) return (-1); } return (0); }