/* * Copyright (c) 2006-2008 Intel Corporation * Copyright (c) 2007 Dave Airlie * Copyright (c) 2008 Red Hat Inc. * * DRM core CRTC related functions * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. * * Authors: * Keith Packard * Eric Anholt * Dave Airlie * Jesse Barnes */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "drm_crtc_internal.h" #include "drm_internal.h" /** * DOC: overview * * A CRTC represents the overall display pipeline. It receives pixel data from * &drm_plane and blends them together. The &drm_display_mode is also attached * to the CRTC, specifying display timings. On the output side the data is fed * to one or more &drm_encoder, which are then each connected to one * &drm_connector. * * To create a CRTC, a KMS drivers allocates and zeroes an instances of * &struct drm_crtc (possibly as part of a larger structure) and registers it * with a call to drm_crtc_init_with_planes(). * * The CRTC is also the entry point for legacy modeset operations, see * &drm_crtc_funcs.set_config, legacy plane operations, see * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these * features are controlled through &drm_property and * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check. */ /** * drm_crtc_from_index - find the registered CRTC at an index * @dev: DRM device * @idx: index of registered CRTC to find for * * Given a CRTC index, return the registered CRTC from DRM device's * list of CRTCs with matching index. This is the inverse of drm_crtc_index(). * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or * &drm_driver.disable_vblank), since that still deals with indices instead * of pointers to &struct drm_crtc." */ struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx) { struct drm_crtc *crtc; drm_for_each_crtc(crtc, dev) if (idx == crtc->index) return crtc; return NULL; } EXPORT_SYMBOL(drm_crtc_from_index); int drm_crtc_force_disable(struct drm_crtc *crtc) { struct drm_mode_set set = { .crtc = crtc, }; WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev)); return drm_mode_set_config_internal(&set); } static unsigned int drm_num_crtcs(struct drm_device *dev) { unsigned int num = 0; struct drm_crtc *tmp; drm_for_each_crtc(tmp, dev) { num++; } return num; } int drm_crtc_register_all(struct drm_device *dev) { struct drm_crtc *crtc; int ret = 0; drm_for_each_crtc(crtc, dev) { drm_debugfs_crtc_add(crtc); if (crtc->funcs->late_register) ret = crtc->funcs->late_register(crtc); if (ret) return ret; } return 0; } void drm_crtc_unregister_all(struct drm_device *dev) { struct drm_crtc *crtc; drm_for_each_crtc(crtc, dev) { if (crtc->funcs->early_unregister) crtc->funcs->early_unregister(crtc); drm_debugfs_crtc_remove(crtc); } } static int drm_crtc_crc_init(struct drm_crtc *crtc) { #ifdef CONFIG_DEBUG_FS mtx_init(&crtc->crc.lock, IPL_NONE); init_waitqueue_head(&crtc->crc.wq); crtc->crc.source = kstrdup("auto", GFP_KERNEL); if (!crtc->crc.source) return -ENOMEM; #endif return 0; } static void drm_crtc_crc_fini(struct drm_crtc *crtc) { #ifdef CONFIG_DEBUG_FS kfree(crtc->crc.source); #endif } static const struct dma_fence_ops drm_crtc_fence_ops; static struct drm_crtc *fence_to_crtc(struct dma_fence *fence) { BUG_ON(fence->ops != &drm_crtc_fence_ops); return container_of(fence->lock, struct drm_crtc, fence_lock); } static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence) { struct drm_crtc *crtc = fence_to_crtc(fence); return crtc->dev->driver->name; } static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence) { struct drm_crtc *crtc = fence_to_crtc(fence); return crtc->timeline_name; } static const struct dma_fence_ops drm_crtc_fence_ops = { .get_driver_name = drm_crtc_fence_get_driver_name, .get_timeline_name = drm_crtc_fence_get_timeline_name, }; struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc) { struct dma_fence *fence; fence = kzalloc(sizeof(*fence), GFP_KERNEL); if (!fence) return NULL; dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock, crtc->fence_context, ++crtc->fence_seqno); return fence; } /** * drm_crtc_init_with_planes - Initialise a new CRTC object with * specified primary and cursor planes. * @dev: DRM device * @crtc: CRTC object to init * @primary: Primary plane for CRTC * @cursor: Cursor plane for CRTC * @funcs: callbacks for the new CRTC * @name: printf style format string for the CRTC name, or NULL for default name * * Inits a new object created as base part of a driver crtc object. Drivers * should use this function instead of drm_crtc_init(), which is only provided * for backwards compatibility with drivers which do not yet support universal * planes). For really simple hardware which has only 1 plane look at * drm_simple_display_pipe_init() instead. * * Returns: * Zero on success, error code on failure. */ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs, const char *name, ...) { struct drm_mode_config *config = &dev->mode_config; int ret; WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY); WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR); /* crtc index is used with 32bit bitmasks */ if (WARN_ON(config->num_crtc >= 32)) return -EINVAL; WARN_ON(drm_drv_uses_atomic_modeset(dev) && (!funcs->atomic_destroy_state || !funcs->atomic_duplicate_state)); crtc->dev = dev; crtc->funcs = funcs; INIT_LIST_HEAD(&crtc->commit_list); mtx_init(&crtc->commit_lock, IPL_NONE); drm_modeset_lock_init(&crtc->mutex); ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC); if (ret) return ret; if (name) { va_list ap; va_start(ap, name); crtc->name = kvasprintf(GFP_KERNEL, name, ap); va_end(ap); } else { crtc->name = kasprintf(GFP_KERNEL, "crtc-%d", drm_num_crtcs(dev)); } if (!crtc->name) { drm_mode_object_unregister(dev, &crtc->base); return -ENOMEM; } crtc->fence_context = dma_fence_context_alloc(1); mtx_init(&crtc->fence_lock, IPL_NONE); snprintf(crtc->timeline_name, sizeof(crtc->timeline_name), "CRTC:%d-%s", crtc->base.id, crtc->name); crtc->base.properties = &crtc->properties; list_add_tail(&crtc->head, &config->crtc_list); crtc->index = config->num_crtc++; crtc->primary = primary; crtc->cursor = cursor; if (primary && !primary->possible_crtcs) primary->possible_crtcs = drm_crtc_mask(crtc); if (cursor && !cursor->possible_crtcs) cursor->possible_crtcs = drm_crtc_mask(crtc); ret = drm_crtc_crc_init(crtc); if (ret) { drm_mode_object_unregister(dev, &crtc->base); return ret; } if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { drm_object_attach_property(&crtc->base, config->prop_active, 0); drm_object_attach_property(&crtc->base, config->prop_mode_id, 0); drm_object_attach_property(&crtc->base, config->prop_out_fence_ptr, 0); drm_object_attach_property(&crtc->base, config->prop_vrr_enabled, 0); } return 0; } EXPORT_SYMBOL(drm_crtc_init_with_planes); /** * drm_crtc_cleanup - Clean up the core crtc usage * @crtc: CRTC to cleanup * * This function cleans up @crtc and removes it from the DRM mode setting * core. Note that the function does *not* free the crtc structure itself, * this is the responsibility of the caller. */ void drm_crtc_cleanup(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; /* Note that the crtc_list is considered to be static; should we * remove the drm_crtc at runtime we would have to decrement all * the indices on the drm_crtc after us in the crtc_list. */ drm_crtc_crc_fini(crtc); kfree(crtc->gamma_store); crtc->gamma_store = NULL; drm_modeset_lock_fini(&crtc->mutex); drm_mode_object_unregister(dev, &crtc->base); list_del(&crtc->head); dev->mode_config.num_crtc--; WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state); if (crtc->state && crtc->funcs->atomic_destroy_state) crtc->funcs->atomic_destroy_state(crtc, crtc->state); kfree(crtc->name); memset(crtc, 0, sizeof(*crtc)); } EXPORT_SYMBOL(drm_crtc_cleanup); /** * drm_mode_getcrtc - get CRTC configuration * @dev: drm device for the ioctl * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * * Construct a CRTC configuration structure to return to the user. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_getcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_crtc *crtc_resp = data; struct drm_crtc *crtc; struct drm_plane *plane; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id); if (!crtc) return -ENOENT; plane = crtc->primary; crtc_resp->gamma_size = crtc->gamma_size; drm_modeset_lock(&plane->mutex, NULL); if (plane->state && plane->state->fb) crtc_resp->fb_id = plane->state->fb->base.id; else if (!plane->state && plane->fb) crtc_resp->fb_id = plane->fb->base.id; else crtc_resp->fb_id = 0; if (plane->state) { crtc_resp->x = plane->state->src_x >> 16; crtc_resp->y = plane->state->src_y >> 16; } drm_modeset_unlock(&plane->mutex); drm_modeset_lock(&crtc->mutex, NULL); if (crtc->state) { if (crtc->state->enable) { drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode); crtc_resp->mode_valid = 1; } else { crtc_resp->mode_valid = 0; } } else { crtc_resp->x = crtc->x; crtc_resp->y = crtc->y; if (crtc->enabled) { drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode); crtc_resp->mode_valid = 1; } else { crtc_resp->mode_valid = 0; } } if (!file_priv->aspect_ratio_allowed) crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; drm_modeset_unlock(&crtc->mutex); return 0; } static int __drm_mode_set_config_internal(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx) { struct drm_crtc *crtc = set->crtc; struct drm_framebuffer *fb; struct drm_crtc *tmp; int ret; WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev)); /* * NOTE: ->set_config can also disable other crtcs (if we steal all * connectors from it), hence we need to refcount the fbs across all * crtcs. Atomic modeset will have saner semantics ... */ drm_for_each_crtc(tmp, crtc->dev) { struct drm_plane *plane = tmp->primary; plane->old_fb = plane->fb; } fb = set->fb; ret = crtc->funcs->set_config(set, ctx); if (ret == 0) { struct drm_plane *plane = crtc->primary; plane->crtc = fb ? crtc : NULL; plane->fb = fb; } drm_for_each_crtc(tmp, crtc->dev) { struct drm_plane *plane = tmp->primary; if (plane->fb) drm_framebuffer_get(plane->fb); if (plane->old_fb) drm_framebuffer_put(plane->old_fb); plane->old_fb = NULL; } return ret; } /** * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config * @set: modeset config to set * * This is a little helper to wrap internal calls to the * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is * correct refcounting dance. * * This should only be used by non-atomic legacy drivers. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_set_config_internal(struct drm_mode_set *set) { WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev)); return __drm_mode_set_config_internal(set, NULL); } EXPORT_SYMBOL(drm_mode_set_config_internal); /** * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the * CRTC viewport * @crtc: CRTC that framebuffer will be displayed on * @x: x panning * @y: y panning * @mode: mode that framebuffer will be displayed under * @fb: framebuffer to check size of */ int drm_crtc_check_viewport(const struct drm_crtc *crtc, int x, int y, const struct drm_display_mode *mode, const struct drm_framebuffer *fb) { int hdisplay, vdisplay; drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay); if (crtc->state && drm_rotation_90_or_270(crtc->primary->state->rotation)) swap(hdisplay, vdisplay); return drm_framebuffer_check_src_coords(x << 16, y << 16, hdisplay << 16, vdisplay << 16, fb); } EXPORT_SYMBOL(drm_crtc_check_viewport); /** * drm_mode_setcrtc - set CRTC configuration * @dev: drm device for the ioctl * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * * Build a new CRTC configuration based on user request. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_config *config = &dev->mode_config; struct drm_mode_crtc *crtc_req = data; struct drm_crtc *crtc; struct drm_plane *plane; struct drm_connector **connector_set = NULL, *connector; struct drm_framebuffer *fb = NULL; struct drm_display_mode *mode = NULL; struct drm_mode_set set; uint32_t __user *set_connectors_ptr; struct drm_modeset_acquire_ctx ctx; int ret; int i; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; /* * Universal plane src offsets are only 16.16, prevent havoc for * drivers using universal plane code internally. */ if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000) return -ERANGE; crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id); if (!crtc) { DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id); return -ENOENT; } DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); plane = crtc->primary; /* allow disabling with the primary plane leased */ if (crtc_req->mode_valid && !drm_lease_held(file_priv, plane->base.id)) return -EACCES; mutex_lock(&crtc->dev->mode_config.mutex); DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret); if (crtc_req->mode_valid) { /* If we have a mode we need a framebuffer. */ /* If we pass -1, set the mode with the currently bound fb */ if (crtc_req->fb_id == -1) { struct drm_framebuffer *old_fb; if (plane->state) old_fb = plane->state->fb; else old_fb = plane->fb; if (!old_fb) { DRM_DEBUG_KMS("CRTC doesn't have current FB\n"); ret = -EINVAL; goto out; } fb = old_fb; /* Make refcounting symmetric with the lookup path. */ drm_framebuffer_get(fb); } else { fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id); if (!fb) { DRM_DEBUG_KMS("Unknown FB ID%d\n", crtc_req->fb_id); ret = -ENOENT; goto out; } } mode = drm_mode_create(dev); if (!mode) { ret = -ENOMEM; goto out; } if (!file_priv->aspect_ratio_allowed && (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) { DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n"); ret = -EINVAL; goto out; } ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode); if (ret) { DRM_DEBUG_KMS("Invalid mode (ret=%d, status=%s)\n", ret, drm_get_mode_status_name(mode->status)); drm_mode_debug_printmodeline(mode); goto out; } /* * Check whether the primary plane supports the fb pixel format. * Drivers not implementing the universal planes API use a * default formats list provided by the DRM core which doesn't * match real hardware capabilities. Skip the check in that * case. */ if (!plane->format_default) { ret = drm_plane_check_pixel_format(plane, fb->format->format, fb->modifier); if (ret) { struct drm_format_name_buf format_name; DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n", drm_get_format_name(fb->format->format, &format_name), fb->modifier); goto out; } } ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y, mode, fb); if (ret) goto out; } if (crtc_req->count_connectors == 0 && mode) { DRM_DEBUG_KMS("Count connectors is 0 but mode set\n"); ret = -EINVAL; goto out; } if (crtc_req->count_connectors > 0 && (!mode || !fb)) { DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n", crtc_req->count_connectors); ret = -EINVAL; goto out; } if (crtc_req->count_connectors > 0) { u32 out_id; /* Avoid unbounded kernel memory allocation */ if (crtc_req->count_connectors > config->num_connector) { ret = -EINVAL; goto out; } connector_set = kmalloc_array(crtc_req->count_connectors, sizeof(struct drm_connector *), GFP_KERNEL); if (!connector_set) { ret = -ENOMEM; goto out; } for (i = 0; i < crtc_req->count_connectors; i++) { connector_set[i] = NULL; set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; if (get_user(out_id, &set_connectors_ptr[i])) { ret = -EFAULT; goto out; } connector = drm_connector_lookup(dev, file_priv, out_id); if (!connector) { DRM_DEBUG_KMS("Connector id %d unknown\n", out_id); ret = -ENOENT; goto out; } DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name); connector_set[i] = connector; } } set.crtc = crtc; set.x = crtc_req->x; set.y = crtc_req->y; set.mode = mode; set.connectors = connector_set; set.num_connectors = crtc_req->count_connectors; set.fb = fb; if (drm_drv_uses_atomic_modeset(dev)) ret = crtc->funcs->set_config(&set, &ctx); else ret = __drm_mode_set_config_internal(&set, &ctx); out: if (fb) drm_framebuffer_put(fb); if (connector_set) { for (i = 0; i < crtc_req->count_connectors; i++) { if (connector_set[i]) drm_connector_put(connector_set[i]); } } kfree(connector_set); drm_mode_destroy(dev, mode); /* In case we need to retry... */ connector_set = NULL; fb = NULL; mode = NULL; DRM_MODESET_LOCK_ALL_END(ctx, ret); mutex_unlock(&crtc->dev->mode_config.mutex); return ret; } int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, struct drm_property *property, uint64_t value) { int ret = -EINVAL; struct drm_crtc *crtc = obj_to_crtc(obj); if (crtc->funcs->set_property) ret = crtc->funcs->set_property(crtc, property, value); if (!ret) drm_object_property_set_value(obj, property, value); return ret; }