/* $OpenBSD: if_al.c,v 1.2 1999/10/29 07:38:23 jason Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/pci/if_al.c,v 1.14 1999/09/25 17:29:01 wpaul Exp $ */ /* * ADMtek AL981 Comet and AN985 Centaur fast ethernet PCI NIC driver. * Datasheets for the AL981 are available from http://www.admtek.com.tw. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The ADMtek AL981 Comet is still another DEC 21x4x clone. It's * a reasonably close copy of the tulip, except for the receiver filter * programming. Where the DEC chip has a special setup frame that * needs to be downloaded into the transmit DMA engine, the ADMtek chip * has physical address and multicast address registers. * * The AN985 is an update to the AL981 which is mostly the same, except * for the following things: * - The AN985 uses a 99C66 EEPROM which requires a slightly different * bit sequence to initiate a read. * - The AN985 uses a serial MII interface instead of providing direct * access to the PHY registers (it uses an internal PHY though). * Although the datasheet for the AN985 is not yet available, you can * use an AL981 datasheet as a reference for most of the chip functions, * except for the MII interface which matches the DEC 21x4x specification * (bits 16, 17, 18 and 19 in the serial I/O register control the MII). */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #endif #include /* for vtophys */ #include /* for vtophys */ #include #include #include #include #include #include /* Enable workaround for small transmitter bug. */ #define AL_TX_STALL_WAR #define AL_USEIOSPACE #include /* * Various supported PHY vendors/types and their names. Note that * this driver will work with pretty much any MII-compliant PHY, * so failure to positively identify the chip is not a fatal error. */ struct al_type al_phys[] = { { TI_PHY_VENDORID, TI_PHY_10BT, "" }, { TI_PHY_VENDORID, TI_PHY_100VGPMI, "" }, { NS_PHY_VENDORID, NS_PHY_83840A, ""}, { LEVEL1_PHY_VENDORID, LEVEL1_PHY_LXT970, "" }, { INTEL_PHY_VENDORID, INTEL_PHY_82555, "" }, { SEEQ_PHY_VENDORID, SEEQ_PHY_80220, "" }, { 0, 0, "" } }; int al_probe __P((struct device *, void *, void *)); void al_attach __P((struct device *, struct device *, void *)); int al_intr __P((void *)); void al_shutdown __P((void *)); int al_newbuf __P((struct al_softc *, struct al_desc *, struct mbuf *)); int al_encap __P((struct al_softc *, struct mbuf *, u_int32_t *)); void al_rxeof __P((struct al_softc *)); void al_txeof __P((struct al_softc *)); void al_tick __P((void *)); void al_start __P((struct ifnet *)); int al_ioctl __P((struct ifnet *, u_long, caddr_t)); void al_init __P((void *)); void al_stop __P((struct al_softc *)); void al_watchdog __P((struct ifnet *)); int al_ifmedia_upd __P((struct ifnet *)); void al_ifmedia_sts __P((struct ifnet *, struct ifmediareq *)); void al_delay __P((struct al_softc *)); void al_eeprom_idle __P((struct al_softc *)); void al_eeprom_putbyte __P((struct al_softc *, int)); void al_eeprom_getword __P((struct al_softc *, int, u_int16_t *)); void al_read_eeprom __P((struct al_softc *, caddr_t, int, int, int)); void al_mii_writebit __P((struct al_softc *, int)); int al_mii_readbit __P((struct al_softc *)); void al_mii_sync __P((struct al_softc *)); void al_mii_send __P((struct al_softc *, u_int32_t, int)); int al_mii_readreg __P((struct al_softc *, struct al_mii_frame *)); int al_mii_writereg __P((struct al_softc *, struct al_mii_frame *)); u_int16_t al_phy_readreg __P((struct al_softc *, int)); void al_phy_writereg __P((struct al_softc *, int, int)); void al_autoneg_xmit __P((struct al_softc *)); void al_autoneg_mii __P((struct al_softc *, int, int)); void al_setmode_mii __P((struct al_softc *, int)); void al_getmode_mii __P((struct al_softc *)); u_int32_t al_calchash __P((caddr_t)); void al_setmulti __P((struct al_softc *)); void al_reset __P((struct al_softc *)); int al_list_rx_init __P((struct al_softc *)); int al_list_tx_init __P((struct al_softc *)); #ifdef AL_USEIOSPACE #define AL_RES SYS_RES_IOPORT #define AL_RID AL_PCI_LOIO #else #define AL_RES SYS_RES_MEMORY #define AL_RID AL_PCI_LOMEM #endif #define AL_SETBIT(sc, reg, x) \ CSR_WRITE_4(sc, reg, \ CSR_READ_4(sc, reg) | x) #define AL_CLRBIT(sc, reg, x) \ CSR_WRITE_4(sc, reg, \ CSR_READ_4(sc, reg) & ~x) #define SIO_SET(x) \ CSR_WRITE_4(sc, AL_SIO, \ CSR_READ_4(sc, AL_SIO) | x) #define SIO_CLR(x) \ CSR_WRITE_4(sc, AL_SIO, \ CSR_READ_4(sc, AL_SIO) & ~x) void al_delay(sc) struct al_softc *sc; { int idx; for (idx = (300 / 33) + 1; idx > 0; idx--) CSR_READ_4(sc, AL_BUSCTL); } void al_eeprom_idle(sc) struct al_softc *sc; { register int i; CSR_WRITE_4(sc, AL_SIO, AL_SIO_EESEL); al_delay(sc); AL_SETBIT(sc, AL_SIO, AL_SIO_ROMCTL_READ); al_delay(sc); AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CS); al_delay(sc); AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CLK); al_delay(sc); for (i = 0; i < 25; i++) { AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CLK); al_delay(sc); AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CLK); al_delay(sc); } AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CLK); al_delay(sc); AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CS); al_delay(sc); CSR_WRITE_4(sc, AL_SIO, 0x00000000); return; } /* * Send a read command and address to the EEPROM, check for ACK. */ void al_eeprom_putbyte(sc, addr) struct al_softc *sc; int addr; { register int d, i; /* * The AN985 has a 99C66 EEPROM on it instead of * a 99C64. It uses a different bit sequence for * specifying the "read" opcode. */ if (sc->al_did == PCI_PRODUCT_ADMTEK_AN985) d = addr | (AL_EECMD_READ << 2); else d = addr | AL_EECMD_READ; /* * Feed in each bit and stobe the clock. */ for (i = 0x400; i; i >>= 1) { if (d & i) { SIO_SET(AL_SIO_EE_DATAIN); } else { SIO_CLR(AL_SIO_EE_DATAIN); } al_delay(sc); SIO_SET(AL_SIO_EE_CLK); al_delay(sc); SIO_CLR(AL_SIO_EE_CLK); al_delay(sc); } return; } /* * Read a word of data stored in the EEPROM at address 'addr.' */ void al_eeprom_getword(sc, addr, dest) struct al_softc *sc; int addr; u_int16_t *dest; { register int i; u_int16_t word = 0; /* Force EEPROM to idle state. */ al_eeprom_idle(sc); /* Enter EEPROM access mode. */ CSR_WRITE_4(sc, AL_SIO, AL_SIO_EESEL); al_delay(sc); AL_SETBIT(sc, AL_SIO, AL_SIO_ROMCTL_READ); al_delay(sc); AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CS); al_delay(sc); AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CLK); al_delay(sc); /* * Send address of word we want to read. */ al_eeprom_putbyte(sc, addr); /* * Start reading bits from EEPROM. */ for (i = 0x8000; i; i >>= 1) { SIO_SET(AL_SIO_EE_CLK); al_delay(sc); if (CSR_READ_4(sc, AL_SIO) & AL_SIO_EE_DATAOUT) word |= i; al_delay(sc); SIO_CLR(AL_SIO_EE_CLK); al_delay(sc); } /* Turn off EEPROM access mode. */ al_eeprom_idle(sc); *dest = word; return; } /* * Read a sequence of words from the EEPROM. */ void al_read_eeprom(sc, dest, off, cnt, swap) struct al_softc *sc; caddr_t dest; int off; int cnt; int swap; { int i; u_int16_t word = 0, *ptr; for (i = 0; i < cnt; i++) { al_eeprom_getword(sc, off + i, &word); ptr = (u_int16_t *)(dest + (i * 2)); if (swap) *ptr = ntohs(word); else *ptr = word; } return; } /* * Write a bit to the MII bus. */ void al_mii_writebit(sc, bit) struct al_softc *sc; int bit; { if (bit) CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_WRITE|AL_SIO_MII_DATAOUT); else CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_WRITE); AL_SETBIT(sc, AL_SIO, AL_SIO_MII_CLK); AL_CLRBIT(sc, AL_SIO, AL_SIO_MII_CLK); return; } /* * Read a bit from the MII bus. */ int al_mii_readbit(sc) struct al_softc *sc; { CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_READ|AL_SIO_MII_DIR); CSR_READ_4(sc, AL_SIO); AL_SETBIT(sc, AL_SIO, AL_SIO_MII_CLK); AL_CLRBIT(sc, AL_SIO, AL_SIO_MII_CLK); if (CSR_READ_4(sc, AL_SIO) & AL_SIO_MII_DATAIN) return(1); return(0); } /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ void al_mii_sync(sc) struct al_softc *sc; { register int i; CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_WRITE); for (i = 0; i < 32; i++) al_mii_writebit(sc, 1); return; } /* * Clock a series of bits through the MII. */ void al_mii_send(sc, bits, cnt) struct al_softc *sc; u_int32_t bits; int cnt; { int i; for (i = (0x1 << (cnt - 1)); i; i >>= 1) al_mii_writebit(sc, bits & i); } /* * Read an PHY register through the MII. */ int al_mii_readreg(sc, frame) struct al_softc *sc; struct al_mii_frame *frame; { int i, ack, s; s = splimp(); /* * Set up frame for RX. */ frame->mii_stdelim = AL_MII_STARTDELIM; frame->mii_opcode = AL_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; /* * Sync the PHYs. */ al_mii_sync(sc); /* * Send command/address info. */ al_mii_send(sc, frame->mii_stdelim, 2); al_mii_send(sc, frame->mii_opcode, 2); al_mii_send(sc, frame->mii_phyaddr, 5); al_mii_send(sc, frame->mii_regaddr, 5); #ifdef notdef /* Idle bit */ al_mii_writebit(sc, 1); al_mii_writebit(sc, 0); #endif /* Check for ack */ ack = al_mii_readbit(sc); /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for(i = 0; i < 16; i++) { al_mii_readbit(sc); } goto fail; } for (i = 0x8000; i; i >>= 1) { if (!ack) { if (al_mii_readbit(sc)) frame->mii_data |= i; } } fail: al_mii_writebit(sc, 0); al_mii_writebit(sc, 0); splx(s); if (ack) return(1); return(0); } /* * Write to a PHY register through the MII. */ int al_mii_writereg(sc, frame) struct al_softc *sc; struct al_mii_frame *frame; { int s; s = splimp(); /* * Set up frame for TX. */ frame->mii_stdelim = AL_MII_STARTDELIM; frame->mii_opcode = AL_MII_WRITEOP; frame->mii_turnaround = AL_MII_TURNAROUND; /* * Sync the PHYs. */ al_mii_sync(sc); al_mii_send(sc, frame->mii_stdelim, 2); al_mii_send(sc, frame->mii_opcode, 2); al_mii_send(sc, frame->mii_phyaddr, 5); al_mii_send(sc, frame->mii_regaddr, 5); al_mii_send(sc, frame->mii_turnaround, 2); al_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ al_mii_writebit(sc, 0); al_mii_writebit(sc, 0); splx(s); return(0); } u_int16_t al_phy_readreg(sc, reg) struct al_softc *sc; int reg; { u_int16_t rval = 0; u_int16_t phy_reg = 0; struct al_mii_frame frame; if (sc->al_did == PCI_PRODUCT_ADMTEK_AN985) { if (sc->al_phy_addr != 1) return(0); frame.mii_phyaddr = sc->al_phy_addr; frame.mii_regaddr = reg; al_mii_readreg(sc, &frame); return(frame.mii_data); } switch(reg) { case PHY_BMCR: phy_reg = AL_BMCR; break; case PHY_BMSR: phy_reg = AL_BMSR; break; case PHY_VENID: phy_reg = AL_VENID; break; case PHY_DEVID: phy_reg = AL_DEVID; break; case PHY_ANAR: phy_reg = AL_ANAR; break; case PHY_LPAR: phy_reg = AL_LPAR; break; case PHY_ANEXP: phy_reg = AL_ANER; break; default: printf("al%d: read: bad phy register %x\n", sc->al_unit, reg); break; } rval = CSR_READ_4(sc, phy_reg) & 0x0000FFFF; return(rval); } void al_phy_writereg(sc, reg, data) struct al_softc *sc; int reg; int data; { u_int16_t phy_reg = 0; struct al_mii_frame frame; if (sc->al_did == PCI_PRODUCT_ADMTEK_AN985) { if (sc->al_phy_addr != 1) return; frame.mii_phyaddr = sc->al_phy_addr; frame.mii_regaddr = reg; frame.mii_data = data; al_mii_writereg(sc, &frame); return; } switch(reg) { case PHY_BMCR: phy_reg = AL_BMCR; break; case PHY_BMSR: phy_reg = AL_BMSR; break; case PHY_VENID: phy_reg = AL_VENID; break; case PHY_DEVID: phy_reg = AL_DEVID; break; case PHY_ANAR: phy_reg = AL_ANAR; break; case PHY_LPAR: phy_reg = AL_LPAR; break; case PHY_ANEXP: phy_reg = AL_ANER; break; default: printf("al%d: phy_write: bad phy register %x\n", sc->al_unit, reg); break; } CSR_WRITE_4(sc, phy_reg, data); return; } /* * Initiate an autonegotiation session. */ void al_autoneg_xmit(sc) struct al_softc *sc; { u_int16_t phy_sts; al_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); DELAY(500); while(al_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_RESET); phy_sts = al_phy_readreg(sc, PHY_BMCR); phy_sts |= PHY_BMCR_AUTONEGENBL|PHY_BMCR_AUTONEGRSTR; al_phy_writereg(sc, PHY_BMCR, phy_sts); return; } /* * Invoke autonegotiation on a PHY. */ void al_autoneg_mii(sc, flag, verbose) struct al_softc *sc; int flag; int verbose; { u_int16_t phy_sts = 0, media, advert, ability; struct ifnet *ifp; struct ifmedia *ifm; ifm = &sc->ifmedia; ifp = &sc->arpcom.ac_if; ifm->ifm_media = IFM_ETHER | IFM_AUTO; /* * The 100baseT4 PHY on the 3c905-T4 has the 'autoneg supported' * bit cleared in the status register, but has the 'autoneg enabled' * bit set in the control register. This is a contradiction, and * I'm not sure how to handle it. If you want to force an attempt * to autoneg for 100baseT4 PHYs, #define FORCE_AUTONEG_TFOUR * and see what happens. */ #ifndef FORCE_AUTONEG_TFOUR /* * First, see if autoneg is supported. If not, there's * no point in continuing. */ phy_sts = al_phy_readreg(sc, PHY_BMSR); if (!(phy_sts & PHY_BMSR_CANAUTONEG)) { if (verbose) printf("al%d: autonegotiation not supported\n", sc->al_unit); ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX; return; } #endif switch (flag) { case AL_FLAG_FORCEDELAY: /* * XXX Never use this option anywhere but in the probe * routine: making the kernel stop dead in its tracks * for three whole seconds after we've gone multi-user * is really bad manners. */ al_autoneg_xmit(sc); DELAY(5000000); break; case AL_FLAG_SCHEDDELAY: /* * Wait for the transmitter to go idle before starting * an autoneg session, otherwise al_start() may clobber * our timeout, and we don't want to allow transmission * during an autoneg session since that can screw it up. */ if (sc->al_cdata.al_tx_cons != 0) { sc->al_want_auto = 1; return; } al_autoneg_xmit(sc); ifp->if_timer = 5; sc->al_autoneg = 1; sc->al_want_auto = 0; return; break; case AL_FLAG_DELAYTIMEO: ifp->if_timer = 0; sc->al_autoneg = 0; break; default: printf("al%d: invalid autoneg flag: %d\n", sc->al_unit, flag); return; } if (al_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_AUTONEGCOMP) { if (verbose) printf("al%d: autoneg complete, ", sc->al_unit); phy_sts = al_phy_readreg(sc, PHY_BMSR); } else { if (verbose) printf("al%d: autoneg not complete, ", sc->al_unit); } media = al_phy_readreg(sc, PHY_BMCR); /* Link is good. Report modes and set duplex mode. */ if (al_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT) { if (verbose) printf("link status good "); advert = al_phy_readreg(sc, PHY_ANAR); ability = al_phy_readreg(sc, PHY_LPAR); if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4) { ifm->ifm_media = IFM_ETHER|IFM_100_T4; media |= PHY_BMCR_SPEEDSEL; media &= ~PHY_BMCR_DUPLEX; printf("(100baseT4)\n"); } else if (advert & PHY_ANAR_100BTXFULL && ability & PHY_ANAR_100BTXFULL) { ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX; media |= PHY_BMCR_SPEEDSEL; media |= PHY_BMCR_DUPLEX; printf("(full-duplex, 100Mbps)\n"); } else if (advert & PHY_ANAR_100BTXHALF && ability & PHY_ANAR_100BTXHALF) { ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX; media |= PHY_BMCR_SPEEDSEL; media &= ~PHY_BMCR_DUPLEX; printf("(half-duplex, 100Mbps)\n"); } else if (advert & PHY_ANAR_10BTFULL && ability & PHY_ANAR_10BTFULL) { ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX; media &= ~PHY_BMCR_SPEEDSEL; media |= PHY_BMCR_DUPLEX; printf("(full-duplex, 10Mbps)\n"); } else if (advert & PHY_ANAR_10BTHALF && ability & PHY_ANAR_10BTHALF) { ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX; media &= ~PHY_BMCR_SPEEDSEL; media &= ~PHY_BMCR_DUPLEX; printf("(half-duplex, 10Mbps)\n"); } media &= ~PHY_BMCR_AUTONEGENBL; /* Set ASIC's duplex mode to match the PHY. */ al_phy_writereg(sc, PHY_BMCR, media); } else { if (verbose) printf("no carrier\n"); } al_init(sc); if (sc->al_tx_pend) { sc->al_autoneg = 0; sc->al_tx_pend = 0; al_start(ifp); } return; } void al_getmode_mii(sc) struct al_softc *sc; { u_int16_t bmsr; struct ifnet *ifp; ifp = &sc->arpcom.ac_if; bmsr = al_phy_readreg(sc, PHY_BMSR); /* fallback */ sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX; if (bmsr & PHY_BMSR_10BTHALF) { ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); } if (bmsr & PHY_BMSR_10BTFULL) { ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX; } if (bmsr & PHY_BMSR_100BTXHALF) { ifp->if_baudrate = 100000000; ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX; } if (bmsr & PHY_BMSR_100BTXFULL) { ifp->if_baudrate = 100000000; ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX; } /* Some also support 100BaseT4. */ if (bmsr & PHY_BMSR_100BT4) { ifp->if_baudrate = 100000000; ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_T4, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_T4; #ifdef FORCE_AUTONEG_TFOUR ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0 NULL): sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO; #endif } if (bmsr & PHY_BMSR_CANAUTONEG) { ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO; } return; } /* * Set speed and duplex mode. */ void al_setmode_mii(sc, media) struct al_softc *sc; int media; { u_int16_t bmcr; struct ifnet *ifp; ifp = &sc->arpcom.ac_if; /* * If an autoneg session is in progress, stop it. */ if (sc->al_autoneg) { printf("al%d: canceling autoneg session\n", sc->al_unit); ifp->if_timer = sc->al_autoneg = sc->al_want_auto = 0; bmcr = al_phy_readreg(sc, PHY_BMCR); bmcr &= ~PHY_BMCR_AUTONEGENBL; al_phy_writereg(sc, PHY_BMCR, bmcr); } printf("al%d: selecting MII, ", sc->al_unit); bmcr = al_phy_readreg(sc, PHY_BMCR); bmcr &= ~(PHY_BMCR_AUTONEGENBL|PHY_BMCR_SPEEDSEL| PHY_BMCR_DUPLEX|PHY_BMCR_LOOPBK); if (IFM_SUBTYPE(media) == IFM_100_T4) { printf("100Mbps/T4, half-duplex\n"); bmcr |= PHY_BMCR_SPEEDSEL; bmcr &= ~PHY_BMCR_DUPLEX; } if (IFM_SUBTYPE(media) == IFM_100_TX) { printf("100Mbps, "); bmcr |= PHY_BMCR_SPEEDSEL; } if (IFM_SUBTYPE(media) == IFM_10_T) { printf("10Mbps, "); bmcr &= ~PHY_BMCR_SPEEDSEL; } if ((media & IFM_GMASK) == IFM_FDX) { printf("full duplex\n"); bmcr |= PHY_BMCR_DUPLEX; } else { printf("half duplex\n"); bmcr &= ~PHY_BMCR_DUPLEX; } al_phy_writereg(sc, PHY_BMCR, bmcr); return; } /* * Calculate CRC of a multicast group address, return the lower 6 bits. */ u_int32_t al_calchash(addr) caddr_t addr; { u_int32_t crc, carry; int i, j; u_int8_t c; /* Compute CRC for the address value. */ crc = 0xFFFFFFFF; /* initial value */ for (i = 0; i < 6; i++) { c = *(addr + i); for (j = 0; j < 8; j++) { carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); crc <<= 1; c >>= 1; if (carry) crc = (crc ^ 0x04c11db6) | carry; } } /* return the filter bit position */ return((crc >> 26) & 0x0000003F); } void al_setmulti(sc) struct al_softc *sc; { struct ifnet *ifp; int h = 0; u_int32_t hashes[2] = { 0, 0 }; struct arpcom *ac = &sc->arpcom; struct ether_multi *enm; struct ether_multistep step; u_int32_t rxfilt; ifp = &sc->arpcom.ac_if; rxfilt = CSR_READ_4(sc, AL_NETCFG); if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { rxfilt |= AL_NETCFG_RX_ALLMULTI; CSR_WRITE_4(sc, AL_NETCFG, rxfilt); return; } else rxfilt &= ~AL_NETCFG_RX_ALLMULTI; /* first, zot all the existing hash bits */ CSR_WRITE_4(sc, AL_MAR0, 0); CSR_WRITE_4(sc, AL_MAR1, 0); /* now program new ones */ ETHER_FIRST_MULTI(step, ac, enm); while (enm != NULL) { h = al_calchash(enm->enm_addrlo); if (h < 32) hashes[0] |= (1 << h); else hashes[1] |= (1 << (h - 32)); ETHER_NEXT_MULTI(step, enm); } CSR_WRITE_4(sc, AL_MAR0, hashes[0]); CSR_WRITE_4(sc, AL_MAR1, hashes[1]); CSR_WRITE_4(sc, AL_NETCFG, rxfilt); return; } void al_reset(sc) struct al_softc *sc; { register int i; AL_SETBIT(sc, AL_BUSCTL, AL_BUSCTL_RESET); for (i = 0; i < AL_TIMEOUT; i++) { DELAY(10); if (!(CSR_READ_4(sc, AL_BUSCTL) & AL_BUSCTL_RESET)) break; } #ifdef notdef if (i == AL_TIMEOUT) printf("al%d: reset never completed!\n", sc->al_unit); #endif CSR_WRITE_4(sc, AL_BUSCTL, AL_BUSCTL_ARBITRATION); /* Wait a little while for the chip to get its brains in order. */ DELAY(1000); return; } /* * Probe for an ADMtek chip. Check the PCI vendor and device * IDs against our list and return a device name if we find a match. */ int al_probe(parent, match, aux) struct device *parent; void *match; void *aux; { struct pci_attach_args *pa = (struct pci_attach_args *)aux; if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_ADMTEK) return(0); switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_ADMTEK_AL981: case PCI_PRODUCT_ADMTEK_AN985: return(1); } return(0); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ void al_attach(parent, self, aux) struct device *parent, *self; void *aux; { int s, i; #ifndef AL_USEIOSPACE vm_offset_t pbase, vbase; #endif const char *intrstr = NULL; u_int32_t command; struct al_softc *sc = (struct al_softc *)self; struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; pci_intr_handle_t ih; struct ifnet *ifp; int media = IFM_ETHER|IFM_100_TX|IFM_FDX; bus_addr_t iobase; bus_size_t iosize; unsigned int round; caddr_t roundptr; struct al_type *p; u_int16_t phy_vid, phy_did, phy_sts; s = splimp(); sc->al_unit = sc->sc_dev.dv_unit; sc->al_did = pa->pa_id; /* * Handle power management nonsense. */ command = pci_conf_read(pc, pa->pa_tag, AL_PCI_CAPID) & 0x000000FF; if (command == 0x01) { command = pci_conf_read(pc, pa->pa_tag, AL_PCI_PWRMGMTCTRL); if (command & AL_PSTATE_MASK) { u_int32_t iobase, membase, irq; /* Save important PCI config data. */ iobase = pci_conf_read(pc, pa->pa_tag, AL_PCI_LOIO); membase = pci_conf_read(pc, pa->pa_tag, AL_PCI_LOMEM); irq = pci_conf_read(pc, pa->pa_tag, AL_PCI_INTLINE); /* Reset the power state. */ printf("al%d: chip is in D%d power mode " "-- setting to D0\n", sc->al_unit, command & AL_PSTATE_MASK); command &= 0xFFFFFFFC; pci_conf_write(pc, pa->pa_tag, AL_PCI_PWRMGMTCTRL, command); /* Restore PCI config data. */ pci_conf_write(pc, pa->pa_tag, AL_PCI_LOIO, iobase); pci_conf_write(pc, pa->pa_tag, AL_PCI_LOMEM, membase); pci_conf_write(pc, pa->pa_tag, AL_PCI_INTLINE, irq); } } /* * Map control/status registers. */ command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE; pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); #ifdef AL_USEIOSPACE if (!(command & PCI_COMMAND_IO_ENABLE)) { printf(": failed to enable I/O ports\n"); goto fail; } if (pci_io_find(pc, pa->pa_tag, AL_PCI_LOIO, &iobase, &iosize)) { printf(": can't find I/O space\n"); goto fail; } if (bus_space_map(pa->pa_iot, iobase, iosize, 0, &sc->al_bhandle)) { printf(": can't map I/O space\n"); goto fail; } sc->al_btag = pa->pa_iot; #else if (!(command & PCI_COMMAND_MEM_ENABLE)) { printf(": failed to enable memory mapping\n"); goto fail; } if (pci_mem_find(pc, pa->pa_tag, AL_PCI_LOMEM, &iobase, &iosize, NULL)){ printf(": can't find mem space\n"); goto fail; } if (bus_space_map(pa->pa_memt, iobase, iosize, 0, &sc->al_bhandle)) { printf(": can't map mem space\n"); goto fail; } sc->al_btag = pa->pa_memt; #endif /* Allocate interrupt */ if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin, pa->pa_intrline, &ih)) { printf(": couldn't map interrupt\n"); goto fail; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, al_intr, sc, self->dv_xname); if (sc->sc_ih == NULL) { printf(": couldn't establish interrupt"); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); goto fail; } printf(": %s", intrstr); /* Save cache line size. */ sc->al_cachesize = pci_conf_read(pc, pa->pa_tag, AL_PCI_CACHELEN)&0xFF; /* Reset the adapter. */ al_reset(sc); /* * Get station address from the EEPROM. */ al_read_eeprom(sc, (caddr_t)&sc->arpcom.ac_enaddr, AL_EE_NODEADDR,3,0); printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr)); sc->al_ldata_ptr = malloc(sizeof(struct al_list_data) + 8, M_DEVBUF, M_NOWAIT); if (sc->al_ldata_ptr == NULL) { printf("%s: no memory for list buffers!\n", sc->al_unit); goto fail; } sc->al_ldata = (struct al_list_data *)sc->al_ldata_ptr; round = (unsigned long)sc->al_ldata_ptr & 0xF; roundptr = sc->al_ldata_ptr; for (i = 0; i < 8; i++) { if (round % 8) { round++; roundptr++; } else break; } sc->al_ldata = (struct al_list_data *)roundptr; bzero(sc->al_ldata, sizeof(struct al_list_data)); ifp = &sc->arpcom.ac_if; ifp->if_softc = sc; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = al_ioctl; ifp->if_output = ether_output; ifp->if_start = al_start; ifp->if_watchdog = al_watchdog; ifp->if_baudrate = 10000000; ifp->if_snd.ifq_maxlen = AL_TX_LIST_CNT - 1; bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); for (i = AL_PHYADDR_MIN; i < AL_PHYADDR_MAL + 1; i++) { sc->al_phy_addr = i; al_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); DELAY(500); while(al_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_RESET); if ((phy_sts = al_phy_readreg(sc, PHY_BMSR))) break; } if (phy_sts) { phy_vid = al_phy_readreg(sc, PHY_VENID); phy_did = al_phy_readreg(sc, PHY_DEVID); p = al_phys; while(p->al_vid) { if (phy_vid == p->al_vid && (phy_did | 0x000F) == p->al_did) { sc->al_pinfo = p; break; } p++; } if (sc->al_pinfo == NULL) sc->al_pinfo = &al_phys[PHY_UNKNOWN]; } else { #ifdef DIAGNOSTIC printf("al%d: MII without any phy!\n", sc->al_unit); #endif } /* * Do ifmedia setup. */ ifmedia_init(&sc->ifmedia, 0, al_ifmedia_upd, al_ifmedia_sts); if (sc->al_pinfo != NULL) { al_getmode_mii(sc); al_autoneg_mii(sc, AL_FLAG_FORCEDELAY, 1); } else { ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); } media = sc->ifmedia.ifm_media; al_stop(sc); ifmedia_set(&sc->ifmedia, media); /* * Call MI attach routines. */ if_attach(ifp); ether_ifattach(ifp); #if NBPFILTER > 0 bpfattach(&sc->arpcom.ac_if.if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif shutdownhook_establish(al_shutdown, sc); fail: splx(s); return; } /* * Initialize the transmit descriptors. */ int al_list_tx_init(sc) struct al_softc *sc; { struct al_chain_data *cd; struct al_list_data *ld; int i; cd = &sc->al_cdata; ld = sc->al_ldata; for (i = 0; i < AL_TX_LIST_CNT; i++) { if (i == (AL_TX_LIST_CNT - 1)) { ld->al_tx_list[i].al_nextdesc = &ld->al_tx_list[0]; ld->al_tx_list[i].al_next = vtophys(&ld->al_tx_list[0]); } else { ld->al_tx_list[i].al_nextdesc = &ld->al_tx_list[i + 1]; ld->al_tx_list[i].al_next = vtophys(&ld->al_tx_list[i + 1]); } ld->al_tx_list[i].al_mbuf = NULL; ld->al_tx_list[i].al_data = 0; ld->al_tx_list[i].al_ctl = 0; } cd->al_tx_prod = cd->al_tx_cons = cd->al_tx_cnt = 0; return(0); } /* * Initialize the RX descriptors and allocate mbufs for them. Note that * we arrange the descriptors in a closed ring, so that the last descriptor * points back to the first. */ int al_list_rx_init(sc) struct al_softc *sc; { struct al_chain_data *cd; struct al_list_data *ld; int i; cd = &sc->al_cdata; ld = sc->al_ldata; for (i = 0; i < AL_RX_LIST_CNT; i++) { if (al_newbuf(sc, &ld->al_rx_list[i], NULL) == ENOBUFS) return(ENOBUFS); if (i == (AL_RX_LIST_CNT - 1)) { ld->al_rx_list[i].al_nextdesc = &ld->al_rx_list[0]; ld->al_rx_list[i].al_next = vtophys(&ld->al_rx_list[0]); } else { ld->al_rx_list[i].al_nextdesc = &ld->al_rx_list[i + 1]; ld->al_rx_list[i].al_next = vtophys(&ld->al_rx_list[i + 1]); } } cd->al_rx_prod = 0; return(0); } /* * Initialize an RX descriptor and attach an MBUF cluster. */ int al_newbuf(sc, c, m) struct al_softc *sc; struct al_desc *c; struct mbuf *m; { struct mbuf *m_new = NULL; if (m == NULL) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { printf("al%d: no memory for rx list " "-- packet dropped!\n", sc->al_unit); return(ENOBUFS); } MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { printf("al%d: no memory for rx list " "-- packet dropped!\n", sc->al_unit); m_freem(m_new); return(ENOBUFS); } m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; } else { m_new = m; m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; m_new->m_data = m_new->m_ext.ext_buf; } m_adj(m_new, sizeof(u_int64_t)); c->al_mbuf = m_new; c->al_data = vtophys(mtod(m_new, caddr_t)); c->al_ctl = AL_RXCTL_RLINK | AL_RXLEN; c->al_status = AL_RXSTAT_OWN; return(0); } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ void al_rxeof(sc) struct al_softc *sc; { struct ether_header *eh; struct mbuf *m; struct ifnet *ifp; struct al_desc *cur_rx; int i, total_len = 0; u_int32_t rxstat; ifp = &sc->arpcom.ac_if; i = sc->al_cdata.al_rx_prod; while(!(sc->al_ldata->al_rx_list[i].al_status & AL_RXSTAT_OWN)) { struct mbuf *m0 = NULL; cur_rx = &sc->al_ldata->al_rx_list[i]; rxstat = cur_rx->al_status; m = cur_rx->al_mbuf; cur_rx->al_mbuf = NULL; total_len = AL_RXBYTES(rxstat); AL_INC(i, AL_RX_LIST_CNT); /* * If an error occurs, update stats, clear the * status word and leave the mbuf cluster in place: * it should simply get re-used next time this descriptor * comes up in the ring. */ if (rxstat & AL_RXSTAT_RXERR) { ifp->if_ierrors++; if (rxstat & AL_RXSTAT_COLLSEEN) ifp->if_collisions++; al_newbuf(sc, cur_rx, m); al_init(sc); return; } /* No errors; receive the packet. */ total_len -= ETHER_CRC_LEN; m0 = m_devget(mtod(m, char *) - ETHER_ALIGN, total_len + ETHER_ALIGN, 0, ifp, NULL); al_newbuf(sc, cur_rx, m); if (m0 == NULL) { ifp->if_ierrors++; continue; } m_adj(m0, ETHER_ALIGN); m = m0; ifp->if_ipackets++; eh = mtod(m, struct ether_header *); #if NBPFILTER > 0 /* * Handle BPF listeners. Let the BPF user see the packet. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* Remove header from mbuf and pass it on. */ m_adj(m, sizeof(struct ether_header)); ether_input(ifp, eh, m); } sc->al_cdata.al_rx_prod = i; return; } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ void al_txeof(sc) struct al_softc *sc; { struct al_desc *cur_tx = NULL; struct ifnet *ifp; u_int32_t idx; ifp = &sc->arpcom.ac_if; /* Clear the timeout timer. */ ifp->if_timer = 0; /* * Go through our tx list and free mbufs for those * frames that have been transmitted. */ idx = sc->al_cdata.al_tx_cons; while(idx != sc->al_cdata.al_tx_prod) { u_int32_t txstat; cur_tx = &sc->al_ldata->al_tx_list[idx]; txstat = cur_tx->al_status; if (txstat & AL_TXSTAT_OWN) break; if (!(cur_tx->al_ctl & AL_TXCTL_LASTFRAG)) { sc->al_cdata.al_tx_cnt--; AL_INC(idx, AL_TX_LIST_CNT); continue; } if (txstat & AL_TXSTAT_ERRSUM) { ifp->if_oerrors++; if (txstat & AL_TXSTAT_EXCESSCOLL) ifp->if_collisions++; if (txstat & AL_TXSTAT_LATECOLL) ifp->if_collisions++; al_init(sc); return; } ifp->if_collisions += (txstat & AL_TXSTAT_COLLCNT) >> 3; ifp->if_opackets++; if (cur_tx->al_mbuf != NULL) { m_freem(cur_tx->al_mbuf); cur_tx->al_mbuf = NULL; } sc->al_cdata.al_tx_cnt--; AL_INC(idx, AL_TX_LIST_CNT); ifp->if_timer = 0; } sc->al_cdata.al_tx_cons = idx; if (cur_tx != NULL) ifp->if_flags &= ~IFF_OACTIVE; return; } void al_tick(xsc) void *xsc; { struct al_softc *sc; struct mii_data *mii = NULL; int s; s = splimp(); sc = xsc; mii = &sc->sc_mii; mii_tick(mii); timeout(al_tick, sc, hz); splx(s); return; }; int al_intr(arg) void *arg; { struct al_softc *sc; struct ifnet *ifp; u_int32_t status; int claimed = 0; sc = arg; ifp = &sc->arpcom.ac_if; /* Supress unwanted interrupts */ if (!(ifp->if_flags & IFF_UP)) { al_stop(sc); return(claimed); } /* Disable interrupts. */ CSR_WRITE_4(sc, AL_IMR, 0x00000000); for (;;) { status = CSR_READ_4(sc, AL_ISR); if (status) CSR_WRITE_4(sc, AL_ISR, status); if ((status & AL_INTRS) == 0) break; claimed = 1; if ((status & AL_ISR_TX_OK) || (status & AL_ISR_TX_NOBUF)) al_txeof(sc); if (status & AL_ISR_TX_IDLE) { al_txeof(sc); if (sc->al_cdata.al_tx_cnt) { AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_TX_ON); CSR_WRITE_4(sc, AL_TXSTART, 0xFFFFFFFF); } } if (status & AL_ISR_TX_UNDERRUN) { u_int32_t cfg; cfg = CSR_READ_4(sc, AL_NETCFG); if ((cfg & AL_NETCFG_TX_THRESH) == AL_TXTHRESH_160BYTES) AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_STORENFWD); else CSR_WRITE_4(sc, AL_NETCFG, cfg + 0x4000); } if (status & AL_ISR_RX_OK) al_rxeof(sc); if ((status & AL_ISR_RX_WATDOGTIMEO) || (status & AL_ISR_RX_IDLE) || (status & AL_ISR_RX_NOBUF)) { al_rxeof(sc); al_init(sc); } if (status & AL_ISR_BUS_ERR) { al_reset(sc); al_init(sc); } } /* Re-enable interrupts. */ CSR_WRITE_4(sc, AL_IMR, AL_INTRS); if (ifp->if_snd.ifq_head != NULL) { al_start(ifp); } return(claimed); } /* * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data * pointers to the fragment pointers. */ int al_encap(sc, m_head, txidx) struct al_softc *sc; struct mbuf *m_head; u_int32_t *txidx; { struct al_desc *f = NULL; struct mbuf *m; int frag, cur, cnt = 0; /* * Start packing the mbufs in this chain into * the fragment pointers. Stop when we run out * of fragments or hit the end of the mbuf chain. */ m = m_head; cur = frag = *txidx; for (m = m_head; m != NULL; m = m->m_next) { if (m->m_len != 0) { #ifdef AL_TX_STALL_WAR /* * Work around some strange behavior in the Comet. For * some reason, the transmitter will sometimes wedge if * we queue up a descriptor chain that wraps from the end * of the transmit list back to the beginning. If we reach * the end of the list and still have more packets to queue, * don't queue them now: end the transmit session here and * then wait until it finishes before sending the other * packets. */ if (*txidx != sc->al_cdata.al_tx_prod && frag == (AL_TX_LIST_CNT - 1)) return(ENOBUFS); #endif if ((AL_TX_LIST_CNT - (sc->al_cdata.al_tx_cnt + cnt)) < 2) return(ENOBUFS); f = &sc->al_ldata->al_tx_list[frag]; f->al_ctl = AL_TXCTL_TLINK | m->m_len; if (cnt == 0) { f->al_status = 0; f->al_ctl |= AL_TXCTL_FIRSTFRAG; } else f->al_status = AL_TXSTAT_OWN; f->al_data = vtophys(mtod(m, vm_offset_t)); cur = frag; AL_INC(frag, AL_TX_LIST_CNT); cnt++; } } if (m != NULL) return(ENOBUFS); sc->al_ldata->al_tx_list[cur].al_mbuf = m_head; sc->al_ldata->al_tx_list[cur].al_ctl |= AL_TXCTL_LASTFRAG|AL_TXCTL_FINT; sc->al_ldata->al_tx_list[*txidx].al_status |= AL_TXSTAT_OWN; sc->al_cdata.al_tx_cnt += cnt; *txidx = frag; return(0); } /* * Main transmit routine. To avoid having to do mbuf copies, we put pointers * to the mbuf data regions directly in the transmit lists. We also save a * copy of the pointers since the transmit list fragment pointers are * physical addresses. */ void al_start(ifp) struct ifnet *ifp; { struct al_softc *sc; struct mbuf *m_head = NULL; u_int32_t idx; sc = ifp->if_softc; if (ifp->if_flags & IFF_OACTIVE) return; idx = sc->al_cdata.al_tx_prod; while(sc->al_ldata->al_tx_list[idx].al_mbuf == NULL) { IF_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; if (al_encap(sc, m_head, &idx)) { IF_PREPEND(&ifp->if_snd, m_head); ifp->if_flags |= IFF_OACTIVE; break; } #if NBPFILTER > 0 /* * If there's a BPF listener, bounce a copy of this frame * to him. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m_head); #endif } /* Transmit */ sc->al_cdata.al_tx_prod = idx; CSR_WRITE_4(sc, AL_TXSTART, 0xFFFFFFFF); /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; return; } void al_init(xsc) void *xsc; { struct al_softc *sc = xsc; struct ifnet *ifp = &sc->arpcom.ac_if; struct mii_data *mii = NULL; int s; s = splimp(); mii = &sc->sc_mii; /* * Cancel pending I/O and free all RX/TX buffers. */ al_stop(sc); al_reset(sc); /* * Set cache alignment and burst length. */ CSR_WRITE_4(sc, AL_BUSCTL, AL_BUSCTL_ARBITRATION); AL_SETBIT(sc, AL_BUSCTL, AL_BURSTLEN_16LONG); switch(sc->al_cachesize) { case 32: AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_32LONG); break; case 16: AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_16LONG); break; case 8: AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_8LONG); break; case 0: default: AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_NONE); break; } AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_HEARTBEAT); AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_STORENFWD); AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_TX_THRESH); if (IFM_SUBTYPE(sc->ifmedia.ifm_media) == IFM_10_T) AL_SETBIT(sc, AL_NETCFG, AL_TXTHRESH_160BYTES); else AL_SETBIT(sc, AL_NETCFG, AL_TXTHRESH_72BYTES); /* Init our MAC address */ CSR_WRITE_4(sc, AL_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0])); CSR_WRITE_4(sc, AL_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4])); /* Init circular RX list. */ if (al_list_rx_init(sc) == ENOBUFS) { printf("al%d: initialization failed: no " "memory for rx buffers\n", sc->al_unit); al_stop(sc); (void)splx(s); return; } /* * Init tx descriptors. */ al_list_tx_init(sc); /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_RX_PROMISC); } else { AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_RX_PROMISC); } /* * Load the multicast filter. */ al_setmulti(sc); /* * Load the address of the RX list. */ CSR_WRITE_4(sc, AL_RXADDR, vtophys(&sc->al_ldata->al_rx_list[0])); CSR_WRITE_4(sc, AL_TXADDR, vtophys(&sc->al_ldata->al_tx_list[0])); /* * Enable interrupts. */ CSR_WRITE_4(sc, AL_IMR, AL_INTRS); CSR_WRITE_4(sc, AL_ISR, 0xFFFFFFFF); /* Enable receiver and transmitter. */ AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_TX_ON|AL_NETCFG_RX_ON); CSR_WRITE_4(sc, AL_RXSTART, 0xFFFFFFFF); mii_mediachg(mii); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; (void)splx(s); timeout(al_tick, sc, hz); return; } /* * Set media options. */ int al_ifmedia_upd(ifp) struct ifnet *ifp; { struct al_softc *sc; sc = ifp->if_softc; if (ifp->if_flags & IFF_UP) al_init(sc); return(0); } /* * Report current media status. */ void al_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { struct al_softc *sc; struct mii_data *mii = NULL; sc = ifp->if_softc; mii = &sc->sc_mii; mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; return; } int al_ioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { struct al_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; struct ifaddr *ifa = (struct ifaddr *)data; int s, error = 0; s = splimp(); if ((error = ether_ioctl(ifp, &sc->arpcom, command, data)) > 0) { splx(s); return error; } switch(command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { case AF_INET: al_init(sc); arp_ifinit(&sc->arpcom, ifa); break; default: al_init(sc); break; } break; case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, &sc->arpcom, command, data); break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { al_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) al_stop(sc); } error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: al_setmulti(sc); error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command); break; default: error = EINVAL; break; } (void)splx(s); return(error); } void al_watchdog(ifp) struct ifnet *ifp; { struct al_softc *sc; sc = ifp->if_softc; if (sc->al_autoneg) { al_autoneg_mii(sc, AL_FLAG_DELAYTIMEO, 1); return; } ifp->if_oerrors++; printf("al%d: watchdog timeout\n", sc->al_unit); if (sc->al_pinfo != NULL) { if (!(al_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT)) printf("al%d: no carrier - transceiver " "cable problem?\n", sc->al_unit); } al_stop(sc); al_reset(sc); al_init(sc); if (ifp->if_snd.ifq_head != NULL) al_start(ifp); return; } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ void al_stop(sc) struct al_softc *sc; { register int i; struct ifnet *ifp; ifp = &sc->arpcom.ac_if; ifp->if_timer = 0; untimeout(al_tick, sc); AL_CLRBIT(sc, AL_NETCFG, (AL_NETCFG_RX_ON|AL_NETCFG_TX_ON)); CSR_WRITE_4(sc, AL_IMR, 0x00000000); CSR_WRITE_4(sc, AL_TXADDR, 0x00000000); CSR_WRITE_4(sc, AL_RXADDR, 0x00000000); /* * Free data in the RX lists. */ for (i = 0; i < AL_RX_LIST_CNT; i++) { if (sc->al_ldata->al_rx_list[i].al_mbuf != NULL) { m_freem(sc->al_ldata->al_rx_list[i].al_mbuf); sc->al_ldata->al_rx_list[i].al_mbuf = NULL; } } bzero((char *)&sc->al_ldata->al_rx_list, sizeof(sc->al_ldata->al_rx_list)); /* * Free the TX list buffers. */ for (i = 0; i < AL_TX_LIST_CNT; i++) { if (sc->al_ldata->al_tx_list[i].al_mbuf != NULL) { m_freem(sc->al_ldata->al_tx_list[i].al_mbuf); sc->al_ldata->al_tx_list[i].al_mbuf = NULL; } } bzero((char *)&sc->al_ldata->al_tx_list, sizeof(sc->al_ldata->al_tx_list)); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); return; } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ void al_shutdown(v) void *v; { struct al_softc *sc = (struct al_softc *)v; al_stop(sc); } struct cfattach al_ca = { sizeof(struct al_softc), al_probe, al_attach }; struct cfdriver al_cd = { 0, "al", DV_IFNET };