/* $OpenBSD: if_dc_pci.c,v 1.55 2006/07/20 02:49:18 brad Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/pci/if_dc.c,v 1.5 2000/01/12 22:24:05 wpaul Exp $ */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #include #if NBPFILTER > 0 #include #endif #include #include #include #include #include #ifdef __sparc64__ #include #endif #ifndef __hppa__ #define DC_USEIOSPACE #endif #include /* * Various supported device vendors/types and their names. */ struct dc_type dc_devs[] = { { PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21140 }, { PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21142 }, { PCI_VENDOR_DAVICOM, PCI_PRODUCT_DAVICOM_DM9009 }, { PCI_VENDOR_DAVICOM, PCI_PRODUCT_DAVICOM_DM9100 }, { PCI_VENDOR_DAVICOM, PCI_PRODUCT_DAVICOM_DM9102 }, { PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_ADM9511 }, { PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_ADM9513 }, { PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_AL981 }, { PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_AN983 }, { PCI_VENDOR_ASIX, PCI_PRODUCT_ASIX_AX88140A }, { PCI_VENDOR_MACRONIX, PCI_PRODUCT_MACRONIX_MX98713 }, { PCI_VENDOR_MACRONIX, PCI_PRODUCT_MACRONIX_MX98715 }, { PCI_VENDOR_MACRONIX, PCI_PRODUCT_MACRONIX_MX98727 }, { PCI_VENDOR_COMPEX, PCI_PRODUCT_COMPEX_98713 }, { PCI_VENDOR_LITEON, PCI_PRODUCT_LITEON_PNIC }, { PCI_VENDOR_LITEON, PCI_PRODUCT_LITEON_PNICII }, { PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_EN1217 }, { PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_EN2242 }, { PCI_VENDOR_CONEXANT, PCI_PRODUCT_CONEXANT_RS7112 }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_21145 }, { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3CSHO100BTX }, { PCI_VENDOR_MICROSOFT, PCI_PRODUCT_MICROSOFT_MN130 }, { 0, 0 } }; int dc_pci_match(struct device *, void *, void *); void dc_pci_attach(struct device *, struct device *, void *); void dc_pci_acpi(struct device *, void *); /* * Probe for a 21143 or clone chip. Check the PCI vendor and device * IDs against our list and return a device name if we find a match. */ int dc_pci_match(parent, match, aux) struct device *parent; void *match, *aux; { struct pci_attach_args *pa = (struct pci_attach_args *)aux; struct dc_type *t; /* * Support for the 21140 chip is experimental. If it works for you, * that's great. By default, this chip will use de. */ if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_DEC && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DEC_21140) return (1); /* * The following chip revision doesn't seem to work so well with dc, * so let's have de handle it. (de will return a match of 2) */ if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_DEC && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DEC_21142 && PCI_REVISION(pa->pa_class) == 0x21) return (1); /* * Since dc doesn't fit on the alpha floppy, we want de to win by * default on alpha so that RAMDISK* and GENERIC will use the same * driver. */ for (t = dc_devs; t->dc_vid != 0; t++) { if ((PCI_VENDOR(pa->pa_id) == t->dc_vid) && (PCI_PRODUCT(pa->pa_id) == t->dc_did)) { #ifdef __alpha__ return (1); #else return (3); #endif } } return (0); } void dc_pci_acpi(self, aux) struct device *self; void *aux; { struct dc_softc *sc = (struct dc_softc *)self; struct pci_attach_args *pa = (struct pci_attach_args *)aux; pci_chipset_tag_t pc = pa->pa_pc; u_int32_t r, cptr; /* Find the location of the capabilities block */ cptr = pci_conf_read(pc, pa->pa_tag, DC_PCI_CCAP) & 0xFF; r = pci_conf_read(pc, pa->pa_tag, cptr) & 0xFF; if (r == 0x01) { r = pci_conf_read(pc, pa->pa_tag, cptr + PCI_PMCSR); if (r & DC_PSTATE_D3) { u_int32_t iobase, membase, irq; /* Save important PCI config data. */ iobase = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFBIO); membase = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFBMA); irq = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFIT); /* Reset the power state. */ printf("%s: chip is in D%d power mode " "-- setting to D0\n", sc->sc_dev.dv_xname, r & DC_PSTATE_D3); r &= 0xFFFFFFFC; pci_conf_write(pc, pa->pa_tag, cptr + PCI_PMCSR, r); /* Restore PCI config data. */ pci_conf_write(pc, pa->pa_tag, DC_PCI_CFBIO, iobase); pci_conf_write(pc, pa->pa_tag, DC_PCI_CFBMA, membase); pci_conf_write(pc, pa->pa_tag, DC_PCI_CFIT, irq); } } return; } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ void dc_pci_attach(parent, self, aux) struct device *parent, *self; void *aux; { const char *intrstr = NULL; pcireg_t command; struct dc_softc *sc = (struct dc_softc *)self; struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; pci_intr_handle_t ih; bus_size_t size; u_int32_t revision; int found = 0; sc->sc_dmat = pa->pa_dmat; /* * Handle power management nonsense. */ dc_pci_acpi(self, aux); sc->dc_csid = pci_conf_read(pc, pa->pa_tag, PCI_SUBSYS_ID_REG); /* * Map control/status registers. */ #ifdef DC_USEIOSPACE if (pci_mapreg_map(pa, DC_PCI_CFBIO, PCI_MAPREG_TYPE_IO, 0, &sc->dc_btag, &sc->dc_bhandle, NULL, &size, 0)) { printf(": can't map i/o space\n"); return; } #else if (pci_mapreg_map(pa, DC_PCI_CFBMA, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &sc->dc_btag, &sc->dc_bhandle, NULL, &size, 0)) { printf(": can't map mem space\n"); return; } #endif /* Allocate interrupt */ if (pci_intr_map(pa, &ih)) { printf(": couldn't map interrupt\n"); goto fail_1; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, dc_intr, sc, self->dv_xname); if (sc->sc_ih == NULL) { printf(": couldn't establish interrupt"); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); goto fail_1; } printf(": %s,", intrstr); /* Need this info to decide on a chip type. */ sc->dc_revision = revision = PCI_REVISION(pa->pa_class); /* Get the eeprom width, but PNIC has no eeprom */ if (!(PCI_VENDOR(pa->pa_id) == PCI_VENDOR_LITEON && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LITEON_PNIC)) dc_eeprom_width(sc); switch (PCI_VENDOR(pa->pa_id)) { case PCI_VENDOR_DEC: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DEC_21140 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DEC_21142) { found = 1; sc->dc_type = DC_TYPE_21143; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; sc->dc_flags |= DC_REDUCED_MII_POLL; dc_read_srom(sc, sc->dc_romwidth); } break; case PCI_VENDOR_INTEL: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEL_21145) { found = 1; sc->dc_type = DC_TYPE_21145; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; sc->dc_flags |= DC_REDUCED_MII_POLL; dc_read_srom(sc, sc->dc_romwidth); } case PCI_VENDOR_DAVICOM: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DAVICOM_DM9100 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DAVICOM_DM9102 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DAVICOM_DM9009) { found = 1; sc->dc_type = DC_TYPE_DM9102; sc->dc_flags |= DC_TX_COALESCE|DC_TX_INTR_ALWAYS; sc->dc_flags |= DC_REDUCED_MII_POLL|DC_TX_STORENFWD; sc->dc_flags |= DC_TX_ALIGN; sc->dc_pmode = DC_PMODE_MII; /* Increase the latency timer value. */ command = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFLT); command &= 0xFFFF00FF; command |= 0x00008000; pci_conf_write(pc, pa->pa_tag, DC_PCI_CFLT, command); } break; case PCI_VENDOR_ADMTEK: case PCI_VENDOR_3COM: case PCI_VENDOR_MICROSOFT: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_AL981) { found = 1; sc->dc_type = DC_TYPE_AL981; sc->dc_flags |= DC_TX_USE_TX_INTR; sc->dc_flags |= DC_TX_ADMTEK_WAR; sc->dc_pmode = DC_PMODE_MII; dc_read_srom(sc, sc->dc_romwidth); } if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_ADM9511 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_ADM9513 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_AN983 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_3COM_3CSHO100BTX || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MICROSOFT_MN130) { found = 1; sc->dc_type = DC_TYPE_AN983; sc->dc_flags |= DC_TX_USE_TX_INTR; sc->dc_flags |= DC_TX_ADMTEK_WAR; sc->dc_flags |= DC_64BIT_HASH; sc->dc_pmode = DC_PMODE_MII; /* Don't read SROM for - auto-loaded on reset */ } break; case PCI_VENDOR_MACRONIX: case PCI_VENDOR_ACCTON: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ACCTON_EN2242) { found = 1; sc->dc_type = DC_TYPE_AN983; sc->dc_flags |= DC_TX_USE_TX_INTR; sc->dc_flags |= DC_TX_ADMTEK_WAR; sc->dc_flags |= DC_64BIT_HASH; sc->dc_pmode = DC_PMODE_MII; /* Don't read SROM for - auto-loaded on reset */ } if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MACRONIX_MX98713) { found = 1; if (revision < DC_REVISION_98713A) { sc->dc_type = DC_TYPE_98713; } if (revision >= DC_REVISION_98713A) { sc->dc_type = DC_TYPE_98713A; sc->dc_flags |= DC_21143_NWAY; } sc->dc_flags |= DC_REDUCED_MII_POLL; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; } if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MACRONIX_MX98715 || PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ACCTON_EN1217) { found = 1; if (revision >= DC_REVISION_98715AEC_C && revision < DC_REVISION_98725) sc->dc_flags |= DC_128BIT_HASH; sc->dc_type = DC_TYPE_987x5; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY; } if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MACRONIX_MX98727) { found = 1; sc->dc_type = DC_TYPE_987x5; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY; } break; case PCI_VENDOR_COMPEX: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_COMPEX_98713) { found = 1; if (revision < DC_REVISION_98713A) { sc->dc_type = DC_TYPE_98713; sc->dc_flags |= DC_REDUCED_MII_POLL; } if (revision >= DC_REVISION_98713A) sc->dc_type = DC_TYPE_98713A; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; } break; case PCI_VENDOR_LITEON: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LITEON_PNICII) { found = 1; sc->dc_type = DC_TYPE_PNICII; sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY; sc->dc_flags |= DC_128BIT_HASH; } if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LITEON_PNIC) { found = 1; sc->dc_type = DC_TYPE_PNIC; sc->dc_flags |= DC_TX_STORENFWD|DC_TX_INTR_ALWAYS; sc->dc_flags |= DC_PNIC_RX_BUG_WAR; sc->dc_pnic_rx_buf = malloc(ETHER_MAX_DIX_LEN * 5, M_DEVBUF, M_NOWAIT); if (sc->dc_pnic_rx_buf == NULL) panic("dc_pci_attach"); if (revision < DC_REVISION_82C169) sc->dc_pmode = DC_PMODE_SYM; } break; case PCI_VENDOR_ASIX: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ASIX_AX88140A) { found = 1; sc->dc_type = DC_TYPE_ASIX; sc->dc_flags |= DC_TX_USE_TX_INTR|DC_TX_INTR_FIRSTFRAG; sc->dc_flags |= DC_REDUCED_MII_POLL; sc->dc_pmode = DC_PMODE_MII; } break; case PCI_VENDOR_CONEXANT: if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CONEXANT_RS7112) { found = 1; sc->dc_type = DC_TYPE_CONEXANT; sc->dc_flags |= DC_TX_INTR_ALWAYS; sc->dc_flags |= DC_REDUCED_MII_POLL; sc->dc_pmode = DC_PMODE_MII; dc_read_srom(sc, sc->dc_romwidth); } break; } if (found == 0) { /* This shouldn't happen if probe has done it's job... */ printf(": unknown device: %x:%x\n", PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id)); goto fail_2; } /* Save the cache line size. */ if (DC_IS_DAVICOM(sc)) sc->dc_cachesize = 0; else sc->dc_cachesize = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFLT) & 0xFF; /* Reset the adapter. */ dc_reset(sc); /* Take 21143 out of snooze mode */ if (DC_IS_INTEL(sc)) { command = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFDD); command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE); pci_conf_write(pc, pa->pa_tag, DC_PCI_CFDD, command); } /* * If we discover later (in dc_attach) that we have an * MII with no PHY, we need to have the 21143 drive the LEDs. * Except there are some systems like the NEC VersaPro NoteBook PC * which have no LEDs, and twiddling these bits has adverse effects * on them. (I.e. you suddenly can't get a link.) * * If mii_attach() returns an error, we leave the DC_TULIP_LEDS * bit set, else we clear it. Since our dc(4) driver is split into * bus-dependent and bus-independent parts, we must do set this bit * here while we are able to do PCI configuration reads. */ if (DC_IS_INTEL(sc)) { if (pci_conf_read(pc, pa->pa_tag, DC_PCI_CSID) != 0x80281033) sc->dc_flags |= DC_TULIP_LEDS; } /* * Try to learn something about the supported media. * We know that ASIX and ADMtek and Davicom devices * will *always* be using MII media, so that's a no-brainer. * The tricky ones are the Macronix/PNIC II and the * Intel 21143. */ if (DC_IS_INTEL(sc)) dc_parse_21143_srom(sc); else if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) { if (sc->dc_type == DC_TYPE_98713) sc->dc_pmode = DC_PMODE_MII; else sc->dc_pmode = DC_PMODE_SYM; } else if (!sc->dc_pmode) sc->dc_pmode = DC_PMODE_MII; #ifdef __sparc64__ { extern void myetheraddr(u_char *); if (OF_getprop(PCITAG_NODE(pa->pa_tag), "local-mac-address", sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN) <= 0) myetheraddr(sc->sc_arpcom.ac_enaddr); if (sc->sc_arpcom.ac_enaddr[0] == 0x00 && sc->sc_arpcom.ac_enaddr[1] == 0x03 && sc->sc_arpcom.ac_enaddr[2] == 0xcc) sc->dc_flags |= DC_MOMENCO_BOTCH; sc->sc_hasmac = 1; } #endif #ifdef SRM_MEDIA sc->dc_srm_media = 0; /* Remember the SRM console media setting */ if (DC_IS_INTEL(sc)) { command = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFDD); command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE); switch ((command >> 8) & 0xff) { case 3: sc->dc_srm_media = IFM_10_T; break; case 4: sc->dc_srm_media = IFM_10_T | IFM_FDX; break; case 5: sc->dc_srm_media = IFM_100_TX; break; case 6: sc->dc_srm_media = IFM_100_TX | IFM_FDX; break; } if (sc->dc_srm_media) sc->dc_srm_media |= IFM_ACTIVE | IFM_ETHER; } #endif dc_attach(sc); return; fail_2: pci_intr_disestablish(pc, sc->sc_ih); fail_1: bus_space_unmap(sc->dc_btag, sc->dc_bhandle, size); } struct cfattach dc_pci_ca = { sizeof(struct dc_softc), dc_pci_match, dc_pci_attach };