/* $OpenBSD: if_iwmreg.h,v 1.4 2015/06/15 08:06:11 stsp Exp $ */ /****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ /* * CSR (control and status registers) * * CSR registers are mapped directly into PCI bus space, and are accessible * whenever platform supplies power to device, even when device is in * low power states due to driver-invoked device resets * (e.g. IWM_CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. * * Use iwl_write32() and iwl_read32() family to access these registers; * these provide simple PCI bus access, without waking up the MAC. * Do not use iwl_write_direct32() family for these registers; * no need to "grab nic access" via IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. * The MAC (uCode processor, etc.) does not need to be powered up for accessing * the CSR registers. * * NOTE: Device does need to be awake in order to read this memory * via IWM_CSR_EEPROM and IWM_CSR_OTP registers */ #define IWM_CSR_HW_IF_CONFIG_REG (0x000) /* hardware interface config */ #define IWM_CSR_INT_COALESCING (0x004) /* accum ints, 32-usec units */ #define IWM_CSR_INT (0x008) /* host interrupt status/ack */ #define IWM_CSR_INT_MASK (0x00c) /* host interrupt enable */ #define IWM_CSR_FH_INT_STATUS (0x010) /* busmaster int status/ack*/ #define IWM_CSR_GPIO_IN (0x018) /* read external chip pins */ #define IWM_CSR_RESET (0x020) /* busmaster enable, NMI, etc*/ #define IWM_CSR_GP_CNTRL (0x024) /* 2nd byte of IWM_CSR_INT_COALESCING, not accessible via iwl_write32()! */ #define IWM_CSR_INT_PERIODIC_REG (0x005) /* * Hardware revision info * Bit fields: * 31-16: Reserved * 15-4: Type of device: see IWM_CSR_HW_REV_TYPE_xxx definitions * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D * 1-0: "Dash" (-) value, as in A-1, etc. */ #define IWM_CSR_HW_REV (0x028) /* * EEPROM and OTP (one-time-programmable) memory reads * * NOTE: Device must be awake, initialized via apm_ops.init(), * in order to read. */ #define IWM_CSR_EEPROM_REG (0x02c) #define IWM_CSR_EEPROM_GP (0x030) #define IWM_CSR_OTP_GP_REG (0x034) #define IWM_CSR_GIO_REG (0x03C) #define IWM_CSR_GP_UCODE_REG (0x048) #define IWM_CSR_GP_DRIVER_REG (0x050) /* * UCODE-DRIVER GP (general purpose) mailbox registers. * SET/CLR registers set/clear bit(s) if "1" is written. */ #define IWM_CSR_UCODE_DRV_GP1 (0x054) #define IWM_CSR_UCODE_DRV_GP1_SET (0x058) #define IWM_CSR_UCODE_DRV_GP1_CLR (0x05c) #define IWM_CSR_UCODE_DRV_GP2 (0x060) #define IWM_CSR_LED_REG (0x094) #define IWM_CSR_DRAM_INT_TBL_REG (0x0A0) #define IWM_CSR_MAC_SHADOW_REG_CTRL (0x0A8) /* 6000 and up */ /* GIO Chicken Bits (PCI Express bus link power management) */ #define IWM_CSR_GIO_CHICKEN_BITS (0x100) /* Analog phase-lock-loop configuration */ #define IWM_CSR_ANA_PLL_CFG (0x20c) /* * CSR Hardware Revision Workaround Register. Indicates hardware rev; * "step" determines CCK backoff for txpower calculation. Used for 4965 only. * See also IWM_CSR_HW_REV register. * Bit fields: * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step * 1-0: "Dash" (-) value, as in C-1, etc. */ #define IWM_CSR_HW_REV_WA_REG (0x22C) #define IWM_CSR_DBG_HPET_MEM_REG (0x240) #define IWM_CSR_DBG_LINK_PWR_MGMT_REG (0x250) /* Bits for IWM_CSR_HW_IF_CONFIG_REG */ #define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000) #define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0) #define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2) #define IWM_CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6) #define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10) #define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12) #define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ #define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ #define IWM_CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ #define IWM_CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/ #define IWM_CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/ /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), * acknowledged (reset) by host writing "1" to flagged bits. */ #define IWM_CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ #define IWM_CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ #define IWM_CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ #define IWM_CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ #define IWM_CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ #define IWM_CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ #define IWM_CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ #define IWM_CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ #define IWM_CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */ #define IWM_CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ #define IWM_CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ #define IWM_CSR_INI_SET_MASK (IWM_CSR_INT_BIT_FH_RX | \ IWM_CSR_INT_BIT_HW_ERR | \ IWM_CSR_INT_BIT_FH_TX | \ IWM_CSR_INT_BIT_SW_ERR | \ IWM_CSR_INT_BIT_RF_KILL | \ IWM_CSR_INT_BIT_SW_RX | \ IWM_CSR_INT_BIT_WAKEUP | \ IWM_CSR_INT_BIT_ALIVE | \ IWM_CSR_INT_BIT_RX_PERIODIC) /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ #define IWM_CSR_FH_INT_BIT_ERR (1 << 31) /* Error */ #define IWM_CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ #define IWM_CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ #define IWM_CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ #define IWM_CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ #define IWM_CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ #define IWM_CSR_FH_INT_RX_MASK (IWM_CSR_FH_INT_BIT_HI_PRIOR | \ IWM_CSR_FH_INT_BIT_RX_CHNL1 | \ IWM_CSR_FH_INT_BIT_RX_CHNL0) #define IWM_CSR_FH_INT_TX_MASK (IWM_CSR_FH_INT_BIT_TX_CHNL1 | \ IWM_CSR_FH_INT_BIT_TX_CHNL0) /* GPIO */ #define IWM_CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) #define IWM_CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) #define IWM_CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) /* RESET */ #define IWM_CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) #define IWM_CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) #define IWM_CSR_RESET_REG_FLAG_SW_RESET (0x00000080) #define IWM_CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) #define IWM_CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) #define IWM_CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) /* * GP (general purpose) CONTROL REGISTER * Bit fields: * 27: HW_RF_KILL_SW * Indicates state of (platform's) hardware RF-Kill switch * 26-24: POWER_SAVE_TYPE * Indicates current power-saving mode: * 000 -- No power saving * 001 -- MAC power-down * 010 -- PHY (radio) power-down * 011 -- Error * 9-6: SYS_CONFIG * Indicates current system configuration, reflecting pins on chip * as forced high/low by device circuit board. * 4: GOING_TO_SLEEP * Indicates MAC is entering a power-saving sleep power-down. * Not a good time to access device-internal resources. * 3: MAC_ACCESS_REQ * Host sets this to request and maintain MAC wakeup, to allow host * access to device-internal resources. Host must wait for * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR * device registers. * 2: INIT_DONE * Host sets this to put device into fully operational D0 power mode. * Host resets this after SW_RESET to put device into low power mode. * 0: MAC_CLOCK_READY * Indicates MAC (ucode processor, etc.) is powered up and can run. * Internal resources are accessible. * NOTE: This does not indicate that the processor is actually running. * NOTE: This does not indicate that device has completed * init or post-power-down restore of internal SRAM memory. * Use IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that * SRAM is restored and uCode is in normal operation mode. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and * do not need to save/restore it. * NOTE: After device reset, this bit remains "0" until host sets * INIT_DONE */ #define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) #define IWM_CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) #define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) #define IWM_CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) #define IWM_CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) #define IWM_CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) #define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000) #define IWM_CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) /* HW REV */ #define IWM_CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0) #define IWM_CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2) #define IWM_CSR_HW_REV_TYPE_MSK (0x000FFF0) #define IWM_CSR_HW_REV_TYPE_5300 (0x0000020) #define IWM_CSR_HW_REV_TYPE_5350 (0x0000030) #define IWM_CSR_HW_REV_TYPE_5100 (0x0000050) #define IWM_CSR_HW_REV_TYPE_5150 (0x0000040) #define IWM_CSR_HW_REV_TYPE_1000 (0x0000060) #define IWM_CSR_HW_REV_TYPE_6x00 (0x0000070) #define IWM_CSR_HW_REV_TYPE_6x50 (0x0000080) #define IWM_CSR_HW_REV_TYPE_6150 (0x0000084) #define IWM_CSR_HW_REV_TYPE_6x05 (0x00000B0) #define IWM_CSR_HW_REV_TYPE_6x30 IWM_CSR_HW_REV_TYPE_6x05 #define IWM_CSR_HW_REV_TYPE_6x35 IWM_CSR_HW_REV_TYPE_6x05 #define IWM_CSR_HW_REV_TYPE_2x30 (0x00000C0) #define IWM_CSR_HW_REV_TYPE_2x00 (0x0000100) #define IWM_CSR_HW_REV_TYPE_105 (0x0000110) #define IWM_CSR_HW_REV_TYPE_135 (0x0000120) #define IWM_CSR_HW_REV_TYPE_NONE (0x00001F0) /* EEPROM REG */ #define IWM_CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) #define IWM_CSR_EEPROM_REG_BIT_CMD (0x00000002) #define IWM_CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC) #define IWM_CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) /* EEPROM GP */ #define IWM_CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */ #define IWM_CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) #define IWM_CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP (0x00000000) #define IWM_CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP (0x00000001) #define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002) #define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004) /* One-time-programmable memory general purpose reg */ #define IWM_CSR_OTP_GP_REG_DEVICE_SELECT (0x00010000) /* 0 - EEPROM, 1 - OTP */ #define IWM_CSR_OTP_GP_REG_OTP_ACCESS_MODE (0x00020000) /* 0 - absolute, 1 - relative */ #define IWM_CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK (0x00100000) /* bit 20 */ #define IWM_CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK (0x00200000) /* bit 21 */ /* GP REG */ #define IWM_CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */ #define IWM_CSR_GP_REG_NO_POWER_SAVE (0x00000000) #define IWM_CSR_GP_REG_MAC_POWER_SAVE (0x01000000) #define IWM_CSR_GP_REG_PHY_POWER_SAVE (0x02000000) #define IWM_CSR_GP_REG_POWER_SAVE_ERROR (0x03000000) /* CSR GIO */ #define IWM_CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) /* * UCODE-DRIVER GP (general purpose) mailbox register 1 * Host driver and uCode write and/or read this register to communicate with * each other. * Bit fields: * 4: UCODE_DISABLE * Host sets this to request permanent halt of uCode, same as * sending CARD_STATE command with "halt" bit set. * 3: CT_KILL_EXIT * Host sets this to request exit from CT_KILL state, i.e. host thinks * device temperature is low enough to continue normal operation. * 2: CMD_BLOCKED * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) * to release uCode to clear all Tx and command queues, enter * unassociated mode, and power down. * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. * 1: SW_BIT_RFKILL * Host sets this when issuing CARD_STATE command to request * device sleep. * 0: MAC_SLEEP * uCode sets this when preparing a power-saving power-down. * uCode resets this when power-up is complete and SRAM is sane. * NOTE: device saves internal SRAM data to host when powering down, * and must restore this data after powering back up. * MAC_SLEEP is the best indication that restore is complete. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and * do not need to save/restore it. */ #define IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) #define IWM_CSR_UCODE_SW_BIT_RFKILL (0x00000002) #define IWM_CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) #define IWM_CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) #define IWM_CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020) /* GP Driver */ #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002) #define IWM_CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6 (0x00000004) #define IWM_CSR_GP_DRIVER_REG_BIT_6050_1x2 (0x00000008) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER (0x00000080) /* GIO Chicken Bits (PCI Express bus link power management) */ #define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) #define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) /* LED */ #define IWM_CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) #define IWM_CSR_LED_REG_TURN_ON (0x60) #define IWM_CSR_LED_REG_TURN_OFF (0x20) /* ANA_PLL */ #define IWM_CSR50_ANA_PLL_CFG_VAL (0x00880300) /* HPET MEM debug */ #define IWM_CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) /* DRAM INT TABLE */ #define IWM_CSR_DRAM_INT_TBL_ENABLE (1 << 31) #define IWM_CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) /* SECURE boot registers */ #define IWM_CSR_SECURE_BOOT_CONFIG_ADDR (0x100) enum iwm_secure_boot_config_reg { IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP = 0x00000001, IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ = 0x00000002, }; #define IWM_CSR_SECURE_BOOT_CPU1_STATUS_ADDR (0x100) #define IWM_CSR_SECURE_BOOT_CPU2_STATUS_ADDR (0x100) enum iwm_secure_boot_status_reg { IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS = 0x00000003, IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED = 0x00000002, IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS = 0x00000004, IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL = 0x00000008, IWM_CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL = 0x00000010, }; #define IWM_CSR_UCODE_LOAD_STATUS_ADDR (0x100) enum iwm_secure_load_status_reg { IWM_CSR_CPU_STATUS_LOADING_STARTED = 0x00000001, IWM_CSR_CPU_STATUS_LOADING_COMPLETED = 0x00000002, IWM_CSR_CPU_STATUS_NUM_OF_LAST_COMPLETED = 0x000000F8, IWM_CSR_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK = 0x0000FF00, }; #define IWM_CSR_SECURE_INSPECTOR_CODE_ADDR (0x100) #define IWM_CSR_SECURE_INSPECTOR_DATA_ADDR (0x100) #define IWM_CSR_SECURE_TIME_OUT (100) #define IWM_FH_TCSR_0_REG0 (0x1D00) /* * HBUS (Host-side Bus) * * HBUS registers are mapped directly into PCI bus space, but are used * to indirectly access device's internal memory or registers that * may be powered-down. * * Use iwl_write_direct32()/iwl_read_direct32() family for these registers; * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ * to make sure the MAC (uCode processor, etc.) is powered up for accessing * internal resources. * * Do not use iwl_write32()/iwl_read32() family to access these registers; * these provide only simple PCI bus access, without waking up the MAC. */ #define IWM_HBUS_BASE (0x400) /* * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM * structures, error log, event log, verifying uCode load). * First write to address register, then read from or write to data register * to complete the job. Once the address register is set up, accesses to * data registers auto-increment the address by one dword. * Bit usage for address registers (read or write): * 0-31: memory address within device */ #define IWM_HBUS_TARG_MEM_RADDR (IWM_HBUS_BASE+0x00c) #define IWM_HBUS_TARG_MEM_WADDR (IWM_HBUS_BASE+0x010) #define IWM_HBUS_TARG_MEM_WDAT (IWM_HBUS_BASE+0x018) #define IWM_HBUS_TARG_MEM_RDAT (IWM_HBUS_BASE+0x01c) /* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */ #define IWM_HBUS_TARG_MBX_C (IWM_HBUS_BASE+0x030) #define IWM_HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004) /* * Registers for accessing device's internal peripheral registers * (e.g. SCD, BSM, etc.). First write to address register, * then read from or write to data register to complete the job. * Bit usage for address registers (read or write): * 0-15: register address (offset) within device * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) */ #define IWM_HBUS_TARG_PRPH_WADDR (IWM_HBUS_BASE+0x044) #define IWM_HBUS_TARG_PRPH_RADDR (IWM_HBUS_BASE+0x048) #define IWM_HBUS_TARG_PRPH_WDAT (IWM_HBUS_BASE+0x04c) #define IWM_HBUS_TARG_PRPH_RDAT (IWM_HBUS_BASE+0x050) /* Used to enable DBGM */ #define IWM_HBUS_TARG_TEST_REG (IWM_HBUS_BASE+0x05c) /* * Per-Tx-queue write pointer (index, really!) * Indicates index to next TFD that driver will fill (1 past latest filled). * Bit usage: * 0-7: queue write index * 11-8: queue selector */ #define IWM_HBUS_TARG_WRPTR (IWM_HBUS_BASE+0x060) /********************************************************** * CSR values **********************************************************/ /* * host interrupt timeout value * used with setting interrupt coalescing timer * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit * * default interrupt coalescing timer is 64 x 32 = 2048 usecs */ #define IWM_HOST_INT_TIMEOUT_MAX (0xFF) #define IWM_HOST_INT_TIMEOUT_DEF (0x40) #define IWM_HOST_INT_TIMEOUT_MIN (0x0) #define IWM_HOST_INT_OPER_MODE (1 << 31) /***************************************************************************** * 7000/3000 series SHR DTS addresses * *****************************************************************************/ /* Diode Results Register Structure: */ enum iwm_dtd_diode_reg { IWM_DTS_DIODE_REG_DIG_VAL = 0x000000FF, /* bits [7:0] */ IWM_DTS_DIODE_REG_VREF_LOW = 0x0000FF00, /* bits [15:8] */ IWM_DTS_DIODE_REG_VREF_HIGH = 0x00FF0000, /* bits [23:16] */ IWM_DTS_DIODE_REG_VREF_ID = 0x03000000, /* bits [25:24] */ IWM_DTS_DIODE_REG_PASS_ONCE = 0x80000000, /* bits [31:31] */ IWM_DTS_DIODE_REG_FLAGS_MSK = 0xFF000000, /* bits [31:24] */ /* Those are the masks INSIDE the flags bit-field: */ IWM_DTS_DIODE_REG_FLAGS_VREFS_ID_POS = 0, IWM_DTS_DIODE_REG_FLAGS_VREFS_ID = 0x00000003, /* bits [1:0] */ IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE_POS = 7, IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE = 0x00000080, /* bits [7:7] */ }; /** * enum iwl_ucode_tlv_flag - ucode API flags * @IWM_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously * was a separate TLV but moved here to save space. * @IWM_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, * treats good CRC threshold as a boolean * @IWM_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWM_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. * @IWM_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS * @IWM_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD * @IWM_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan * offload profile config command. * @IWM_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api * @IWM_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API. * @IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses * @IWM_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API * @IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element * from the probe request template. * @IWM_UCODE_TLV_FLAGS_D3_CONTINUITY_API: modified D3 API to allow keeping * connection when going back to D0 * @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) * @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) * @IWM_UCODE_TLV_FLAGS_SCHED_SCAN: this uCode image supports scheduled scan. * @IWM_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API * @IWM_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command * containing CAM (Continuous Active Mode) indication. * @IWM_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a * single bound interface). * @IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save */ enum iwm_ucode_tlv_flag { IWM_UCODE_TLV_FLAGS_PAN = (1 << 0), IWM_UCODE_TLV_FLAGS_NEWSCAN = (1 << 1), IWM_UCODE_TLV_FLAGS_MFP = (1 << 2), IWM_UCODE_TLV_FLAGS_P2P = (1 << 3), IWM_UCODE_TLV_FLAGS_DW_BC_TABLE = (1 << 4), IWM_UCODE_TLV_FLAGS_NEWBT_COEX = (1 << 5), IWM_UCODE_TLV_FLAGS_PM_CMD_SUPPORT = (1 << 6), IWM_UCODE_TLV_FLAGS_SHORT_BL = (1 << 7), IWM_UCODE_TLV_FLAGS_RX_ENERGY_API = (1 << 8), IWM_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 = (1 << 9), IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = (1 << 10), IWM_UCODE_TLV_FLAGS_BF_UPDATED = (1 << 11), IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID = (1 << 12), IWM_UCODE_TLV_FLAGS_D3_CONTINUITY_API = (1 << 14), IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = (1 << 15), IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = (1 << 16), IWM_UCODE_TLV_FLAGS_SCHED_SCAN = (1 << 17), IWM_UCODE_TLV_FLAGS_STA_KEY_CMD = (1 << 19), IWM_UCODE_TLV_FLAGS_DEVICE_PS_CMD = (1 << 20), IWM_UCODE_TLV_FLAGS_P2P_PS = (1 << 21), IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT = (1 << 24), IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD = (1 << 26), }; /* The default calibrate table size if not specified by firmware file */ #define IWM_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 #define IWM_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 #define IWM_MAX_PHY_CALIBRATE_TBL_SIZE 253 /* The default max probe length if not specified by the firmware file */ #define IWM_DEFAULT_MAX_PROBE_LENGTH 200 /* * enumeration of ucode section. * This enumeration is used directly for older firmware (before 16.0). * For new firmware, there can be up to 4 sections (see below) but the * first one packaged into the firmware file is the DATA section and * some debugging code accesses that. */ enum iwm_ucode_sec { IWM_UCODE_SECTION_DATA, IWM_UCODE_SECTION_INST, }; /* * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address. */ #define IWM_UCODE_SECTION_MAX 6 #define IWM_UCODE_FIRST_SECTION_OF_SECOND_CPU (IWM_UCODE_SECTION_MAX/2) /* uCode version contains 4 values: Major/Minor/API/Serial */ #define IWM_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) #define IWM_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) #define IWM_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) #define IWM_UCODE_SERIAL(ver) ((ver) & 0x000000FF) /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwm_tlv_calib_ctrl { uint32_t flow_trigger; uint32_t event_trigger; } __packed; enum iwm_fw_phy_cfg { IWM_FW_PHY_CFG_RADIO_TYPE_POS = 0, IWM_FW_PHY_CFG_RADIO_TYPE = 0x3 << IWM_FW_PHY_CFG_RADIO_TYPE_POS, IWM_FW_PHY_CFG_RADIO_STEP_POS = 2, IWM_FW_PHY_CFG_RADIO_STEP = 0x3 << IWM_FW_PHY_CFG_RADIO_STEP_POS, IWM_FW_PHY_CFG_RADIO_DASH_POS = 4, IWM_FW_PHY_CFG_RADIO_DASH = 0x3 << IWM_FW_PHY_CFG_RADIO_DASH_POS, IWM_FW_PHY_CFG_TX_CHAIN_POS = 16, IWM_FW_PHY_CFG_TX_CHAIN = 0xf << IWM_FW_PHY_CFG_TX_CHAIN_POS, IWM_FW_PHY_CFG_RX_CHAIN_POS = 20, IWM_FW_PHY_CFG_RX_CHAIN = 0xf << IWM_FW_PHY_CFG_RX_CHAIN_POS, }; #define IWM_UCODE_MAX_CS 1 /** * struct iwm_fw_cipher_scheme - a cipher scheme supported by FW. * @cipher: a cipher suite selector * @flags: cipher scheme flags (currently reserved for a future use) * @hdr_len: a size of MPDU security header * @pn_len: a size of PN * @pn_off: an offset of pn from the beginning of the security header * @key_idx_off: an offset of key index byte in the security header * @key_idx_mask: a bit mask of key_idx bits * @key_idx_shift: bit shift needed to get key_idx * @mic_len: mic length in bytes * @hw_cipher: a HW cipher index used in host commands */ struct iwm_fw_cipher_scheme { uint32_t cipher; uint8_t flags; uint8_t hdr_len; uint8_t pn_len; uint8_t pn_off; uint8_t key_idx_off; uint8_t key_idx_mask; uint8_t key_idx_shift; uint8_t mic_len; uint8_t hw_cipher; } __packed; /** * struct iwm_fw_cscheme_list - a cipher scheme list * @size: a number of entries * @cs: cipher scheme entries */ struct iwm_fw_cscheme_list { uint8_t size; struct iwm_fw_cipher_scheme cs[]; } __packed; /* v1/v2 uCode file layout */ struct iwm_ucode_header { uint32_t ver; /* major/minor/API/serial */ union { struct { uint32_t inst_size; /* bytes of runtime code */ uint32_t data_size; /* bytes of runtime data */ uint32_t init_size; /* bytes of init code */ uint32_t init_data_size; /* bytes of init data */ uint32_t boot_size; /* bytes of bootstrap code */ uint8_t data[0]; /* in same order as sizes */ } v1; struct { uint32_t build; /* build number */ uint32_t inst_size; /* bytes of runtime code */ uint32_t data_size; /* bytes of runtime data */ uint32_t init_size; /* bytes of init code */ uint32_t init_data_size; /* bytes of init data */ uint32_t boot_size; /* bytes of bootstrap code */ uint8_t data[0]; /* in same order as sizes */ } v2; } u; }; /* * new TLV uCode file layout * * The new TLV file format contains TLVs, that each specify * some piece of data. */ enum iwm_ucode_tlv_type { IWM_UCODE_TLV_INVALID = 0, /* unused */ IWM_UCODE_TLV_INST = 1, IWM_UCODE_TLV_DATA = 2, IWM_UCODE_TLV_INIT = 3, IWM_UCODE_TLV_INIT_DATA = 4, IWM_UCODE_TLV_BOOT = 5, IWM_UCODE_TLV_PROBE_MAX_LEN = 6, /* a uint32_t value */ IWM_UCODE_TLV_PAN = 7, IWM_UCODE_TLV_RUNT_EVTLOG_PTR = 8, IWM_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, IWM_UCODE_TLV_RUNT_ERRLOG_PTR = 10, IWM_UCODE_TLV_INIT_EVTLOG_PTR = 11, IWM_UCODE_TLV_INIT_EVTLOG_SIZE = 12, IWM_UCODE_TLV_INIT_ERRLOG_PTR = 13, IWM_UCODE_TLV_ENHANCE_SENS_TBL = 14, IWM_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, IWM_UCODE_TLV_WOWLAN_INST = 16, IWM_UCODE_TLV_WOWLAN_DATA = 17, IWM_UCODE_TLV_FLAGS = 18, IWM_UCODE_TLV_SEC_RT = 19, IWM_UCODE_TLV_SEC_INIT = 20, IWM_UCODE_TLV_SEC_WOWLAN = 21, IWM_UCODE_TLV_DEF_CALIB = 22, IWM_UCODE_TLV_PHY_SKU = 23, IWM_UCODE_TLV_SECURE_SEC_RT = 24, IWM_UCODE_TLV_SECURE_SEC_INIT = 25, IWM_UCODE_TLV_SECURE_SEC_WOWLAN = 26, IWM_UCODE_TLV_NUM_OF_CPU = 27, IWM_UCODE_TLV_CSCHEME = 28, /* * Following two are not in our base tag, but allow * handling ucode version 9. */ IWM_UCODE_TLV_API_CHANGES_SET = 29, IWM_UCODE_TLV_ENABLED_CAPABILITIES = 30 }; struct iwm_ucode_tlv { uint32_t type; /* see above */ uint32_t length; /* not including type/length fields */ uint8_t data[0]; }; #define IWM_TLV_UCODE_MAGIC 0x0a4c5749 struct iwm_tlv_ucode_header { /* * The TLV style ucode header is distinguished from * the v1/v2 style header by first four bytes being * zero, as such is an invalid combination of * major/minor/API/serial versions. */ uint32_t zero; uint32_t magic; uint8_t human_readable[64]; uint32_t ver; /* major/minor/API/serial */ uint32_t build; uint64_t ignore; /* * The data contained herein has a TLV layout, * see above for the TLV header and types. * Note that each TLV is padded to a length * that is a multiple of 4 for alignment. */ uint8_t data[0]; }; /* * Registers in this file are internal, not PCI bus memory mapped. * Driver accesses these via IWM_HBUS_TARG_PRPH_* registers. */ #define IWM_PRPH_BASE (0x00000) #define IWM_PRPH_END (0xFFFFF) /* APMG (power management) constants */ #define IWM_APMG_BASE (IWM_PRPH_BASE + 0x3000) #define IWM_APMG_CLK_CTRL_REG (IWM_APMG_BASE + 0x0000) #define IWM_APMG_CLK_EN_REG (IWM_APMG_BASE + 0x0004) #define IWM_APMG_CLK_DIS_REG (IWM_APMG_BASE + 0x0008) #define IWM_APMG_PS_CTRL_REG (IWM_APMG_BASE + 0x000c) #define IWM_APMG_PCIDEV_STT_REG (IWM_APMG_BASE + 0x0010) #define IWM_APMG_RFKILL_REG (IWM_APMG_BASE + 0x0014) #define IWM_APMG_RTC_INT_STT_REG (IWM_APMG_BASE + 0x001c) #define IWM_APMG_RTC_INT_MSK_REG (IWM_APMG_BASE + 0x0020) #define IWM_APMG_DIGITAL_SVR_REG (IWM_APMG_BASE + 0x0058) #define IWM_APMG_ANALOG_SVR_REG (IWM_APMG_BASE + 0x006C) #define IWM_APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001) #define IWM_APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) #define IWM_APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) #define IWM_APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) #define IWM_APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) #define IWM_APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) #define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) #define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) #define IWM_APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ #define IWM_APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) #define IWM_APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) #define IWM_APMG_RTC_INT_STT_RFKILL (0x10000000) /* Device system time */ #define IWM_DEVICE_SYSTEM_TIME_REG 0xA0206C /* Device NMI register */ #define IWM_DEVICE_SET_NMI_REG 0x00a01c30 /***************************************************************************** * 7000/3000 series SHR DTS addresses * *****************************************************************************/ #define IWM_SHR_MISC_WFM_DTS_EN (0x00a10024) #define IWM_DTSC_CFG_MODE (0x00a10604) #define IWM_DTSC_VREF_AVG (0x00a10648) #define IWM_DTSC_VREF5_AVG (0x00a1064c) #define IWM_DTSC_CFG_MODE_PERIODIC (0x2) #define IWM_DTSC_PTAT_AVG (0x00a10650) /** * Tx Scheduler * * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in * host DRAM. It steers each frame's Tx command (which contains the frame * data) into one of up to 7 prioritized Tx DMA FIFO channels within the * device. A queue maps to only one (selectable by driver) Tx DMA channel, * but one DMA channel may take input from several queues. * * Tx DMA FIFOs have dedicated purposes. * * For 5000 series and up, they are used differently * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c): * * 0 -- EDCA BK (background) frames, lowest priority * 1 -- EDCA BE (best effort) frames, normal priority * 2 -- EDCA VI (video) frames, higher priority * 3 -- EDCA VO (voice) and management frames, highest priority * 4 -- unused * 5 -- unused * 6 -- unused * 7 -- Commands * * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. * In addition, driver can map the remaining queues to Tx DMA/FIFO * channels 0-3 to support 11n aggregation via EDCA DMA channels. * * The driver sets up each queue to work in one of two modes: * * 1) Scheduler-Ack, in which the scheduler automatically supports a * block-ack (BA) window of up to 64 TFDs. In this mode, each queue * contains TFDs for a unique combination of Recipient Address (RA) * and Traffic Identifier (TID), that is, traffic of a given * Quality-Of-Service (QOS) priority, destined for a single station. * * In scheduler-ack mode, the scheduler keeps track of the Tx status of * each frame within the BA window, including whether it's been transmitted, * and whether it's been acknowledged by the receiving station. The device * automatically processes block-acks received from the receiving STA, * and reschedules un-acked frames to be retransmitted (successful * Tx completion may end up being out-of-order). * * The driver must maintain the queue's Byte Count table in host DRAM * for this mode. * This mode does not support fragmentation. * * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. * The device may automatically retry Tx, but will retry only one frame * at a time, until receiving ACK from receiving station, or reaching * retry limit and giving up. * * The command queue (#4/#9) must use this mode! * This mode does not require use of the Byte Count table in host DRAM. * * Driver controls scheduler operation via 3 means: * 1) Scheduler registers * 2) Shared scheduler data base in internal SRAM * 3) Shared data in host DRAM * * Initialization: * * When loading, driver should allocate memory for: * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory * (1024 bytes for each queue). * * After receiving "Alive" response from uCode, driver must initialize * the scheduler (especially for queue #4/#9, the command queue, otherwise * the driver can't issue commands!): */ #define IWM_SCD_MEM_LOWER_BOUND (0x0000) /** * Max Tx window size is the max number of contiguous TFDs that the scheduler * can keep track of at one time when creating block-ack chains of frames. * Note that "64" matches the number of ack bits in a block-ack packet. */ #define IWM_SCD_WIN_SIZE 64 #define IWM_SCD_FRAME_LIMIT 64 #define IWM_SCD_TXFIFO_POS_TID (0) #define IWM_SCD_TXFIFO_POS_RA (4) #define IWM_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) /* agn SCD */ #define IWM_SCD_QUEUE_STTS_REG_POS_TXF (0) #define IWM_SCD_QUEUE_STTS_REG_POS_ACTIVE (3) #define IWM_SCD_QUEUE_STTS_REG_POS_WSL (4) #define IWM_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) #define IWM_SCD_QUEUE_STTS_REG_MSK (0x017F0000) #define IWM_SCD_QUEUE_CTX_REG1_CREDIT_POS (8) #define IWM_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00) #define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24) #define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000) #define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0) #define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F) #define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) #define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) /* Context Data */ #define IWM_SCD_CONTEXT_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x600) #define IWM_SCD_CONTEXT_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0) /* Tx status */ #define IWM_SCD_TX_STTS_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0) #define IWM_SCD_TX_STTS_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0) /* Translation Data */ #define IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0) #define IWM_SCD_TRANS_TBL_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x808) #define IWM_SCD_CONTEXT_QUEUE_OFFSET(x)\ (IWM_SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8)) #define IWM_SCD_TX_STTS_QUEUE_OFFSET(x)\ (IWM_SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16)) #define IWM_SCD_TRANS_TBL_OFFSET_QUEUE(x) \ ((IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc) #define IWM_SCD_BASE (IWM_PRPH_BASE + 0xa02c00) #define IWM_SCD_SRAM_BASE_ADDR (IWM_SCD_BASE + 0x0) #define IWM_SCD_DRAM_BASE_ADDR (IWM_SCD_BASE + 0x8) #define IWM_SCD_AIT (IWM_SCD_BASE + 0x0c) #define IWM_SCD_TXFACT (IWM_SCD_BASE + 0x10) #define IWM_SCD_ACTIVE (IWM_SCD_BASE + 0x14) #define IWM_SCD_QUEUECHAIN_SEL (IWM_SCD_BASE + 0xe8) #define IWM_SCD_CHAINEXT_EN (IWM_SCD_BASE + 0x244) #define IWM_SCD_AGGR_SEL (IWM_SCD_BASE + 0x248) #define IWM_SCD_INTERRUPT_MASK (IWM_SCD_BASE + 0x108) static inline unsigned int IWM_SCD_QUEUE_WRPTR(unsigned int chnl) { if (chnl < 20) return IWM_SCD_BASE + 0x18 + chnl * 4; return IWM_SCD_BASE + 0x284 + (chnl - 20) * 4; } static inline unsigned int IWM_SCD_QUEUE_RDPTR(unsigned int chnl) { if (chnl < 20) return IWM_SCD_BASE + 0x68 + chnl * 4; return IWM_SCD_BASE + 0x2B4 + (chnl - 20) * 4; } static inline unsigned int IWM_SCD_QUEUE_STATUS_BITS(unsigned int chnl) { if (chnl < 20) return IWM_SCD_BASE + 0x10c + chnl * 4; return IWM_SCD_BASE + 0x384 + (chnl - 20) * 4; } /*********************** END TX SCHEDULER *************************************/ /* Oscillator clock */ #define IWM_OSC_CLK (0xa04068) #define IWM_OSC_CLK_FORCE_CONTROL (0x8) /****************************/ /* Flow Handler Definitions */ /****************************/ /** * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) * Addresses are offsets from device's PCI hardware base address. */ #define IWM_FH_MEM_LOWER_BOUND (0x1000) #define IWM_FH_MEM_UPPER_BOUND (0x2000) /** * Keep-Warm (KW) buffer base address. * * Driver must allocate a 4KByte buffer that is for keeping the * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency * DRAM access when doing Txing or Rxing. The dummy accesses prevent host * from going into a power-savings mode that would cause higher DRAM latency, * and possible data over/under-runs, before all Tx/Rx is complete. * * Driver loads IWM_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) * of the buffer, which must be 4K aligned. Once this is set up, the device * automatically invokes keep-warm accesses when normal accesses might not * be sufficient to maintain fast DRAM response. * * Bit fields: * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned */ #define IWM_FH_KW_MEM_ADDR_REG (IWM_FH_MEM_LOWER_BOUND + 0x97C) /** * TFD Circular Buffers Base (CBBC) addresses * * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) * (see struct iwm_tfd_frame). These 16 pointer registers are offset by 0x04 * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte * aligned (address bits 0-7 must be 0). * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers * for them are in different places. * * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ #define IWM_FH_MEM_CBBC_0_15_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0) #define IWM_FH_MEM_CBBC_0_15_UPPER_BOUN (IWM_FH_MEM_LOWER_BOUND + 0xA10) #define IWM_FH_MEM_CBBC_16_19_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xBF0) #define IWM_FH_MEM_CBBC_16_19_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00) #define IWM_FH_MEM_CBBC_20_31_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xB20) #define IWM_FH_MEM_CBBC_20_31_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xB80) /* Find TFD CB base pointer for given queue */ static inline unsigned int IWM_FH_MEM_CBBC_QUEUE(unsigned int chnl) { if (chnl < 16) return IWM_FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; if (chnl < 20) return IWM_FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); return IWM_FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); } /** * Rx SRAM Control and Status Registers (RSCSR) * * These registers provide handshake between driver and device for the Rx queue * (this queue handles *all* command responses, notifications, Rx data, etc. * sent from uCode to host driver). Unlike Tx, there is only one Rx * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 * mapping between RBDs and RBs. * * Driver must allocate host DRAM memory for the following, and set the * physical address of each into device registers: * * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 * entries (although any power of 2, up to 4096, is selectable by driver). * Each entry (1 dword) points to a receive buffer (RB) of consistent size * (typically 4K, although 8K or 16K are also selectable by driver). * Driver sets up RB size and number of RBDs in the CB via Rx config * register IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG. * * Bit fields within one RBD: * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned * * Driver sets physical address [35:8] of base of RBD circular buffer * into IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. * * 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers * (RBs) have been filled, via a "write pointer", actually the index of * the RB's corresponding RBD within the circular buffer. Driver sets * physical address [35:4] into IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. * * Bit fields in lower dword of Rx status buffer (upper dword not used * by driver: * 31-12: Not used by driver * 11- 0: Index of last filled Rx buffer descriptor * (device writes, driver reads this value) * * As the driver prepares Receive Buffers (RBs) for device to fill, driver must * enter pointers to these RBs into contiguous RBD circular buffer entries, * and update the device's "write" index register, * IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG. * * This "write" index corresponds to the *next* RBD that the driver will make * available, i.e. one RBD past the tail of the ready-to-fill RBDs within * the circular buffer. This value should initially be 0 (before preparing any * RBs), should be 8 after preparing the first 8 RBs (for example), and must * wrap back to 0 at the end of the circular buffer (but don't wrap before * "read" index has advanced past 1! See below). * NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. * * As the device fills RBs (referenced from contiguous RBDs within the circular * buffer), it updates the Rx status buffer in host DRAM, 2) described above, * to tell the driver the index of the latest filled RBD. The driver must * read this "read" index from DRAM after receiving an Rx interrupt from device * * The driver must also internally keep track of a third index, which is the * next RBD to process. When receiving an Rx interrupt, driver should process * all filled but unprocessed RBs up to, but not including, the RB * corresponding to the "read" index. For example, if "read" index becomes "1", * driver may process the RB pointed to by RBD 0. Depending on volume of * traffic, there may be many RBs to process. * * If read index == write index, device thinks there is no room to put new data. * Due to this, the maximum number of filled RBs is 255, instead of 256. To * be safe, make sure that there is a gap of at least 2 RBDs between "write" * and "read" indexes; that is, make sure that there are no more than 254 * buffers waiting to be filled. */ #define IWM_FH_MEM_RSCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xBC0) #define IWM_FH_MEM_RSCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00) #define IWM_FH_MEM_RSCSR_CHNL0 (IWM_FH_MEM_RSCSR_LOWER_BOUND) /** * Physical base address of 8-byte Rx Status buffer. * Bit fields: * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. */ #define IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG (IWM_FH_MEM_RSCSR_CHNL0) /** * Physical base address of Rx Buffer Descriptor Circular Buffer. * Bit fields: * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. */ #define IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x004) /** * Rx write pointer (index, really!). * Bit fields: * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. * NOTE: For 256-entry circular buffer, use only bits [7:0]. */ #define IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x008) #define IWM_FH_RSCSR_CHNL0_WPTR (IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG) #define IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x00c) #define IWM_FH_RSCSR_CHNL0_RDPTR IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG /** * Rx Config/Status Registers (RCSR) * Rx Config Reg for channel 0 (only channel used) * * Driver must initialize IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for * normal operation (see bit fields). * * Clearing IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. * Driver should poll IWM_FH_MEM_RSSR_RX_STATUS_REG for * IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. * * Bit fields: * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, * '10' operate normally * 29-24: reserved * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), * min "5" for 32 RBDs, max "12" for 4096 RBDs. * 19-18: reserved * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, * '10' 12K, '11' 16K. * 15-14: reserved * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) * typical value 0x10 (about 1/2 msec) * 3- 0: reserved */ #define IWM_FH_MEM_RCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00) #define IWM_FH_MEM_RCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xCC0) #define IWM_FH_MEM_RCSR_CHNL0 (IWM_FH_MEM_RCSR_LOWER_BOUND) #define IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG (IWM_FH_MEM_RCSR_CHNL0) #define IWM_FH_MEM_RCSR_CHNL0_RBDCB_WPTR (IWM_FH_MEM_RCSR_CHNL0 + 0x8) #define IWM_FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (IWM_FH_MEM_RCSR_CHNL0 + 0x10) #define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ #define IWM_FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) #define IWM_FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) #define IWM_RX_RB_TIMEOUT (0x11) #define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) #define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) #define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) #define IWM_FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) #define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) #define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) /** * Rx Shared Status Registers (RSSR) * * After stopping Rx DMA channel (writing 0 to * IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll * IWM_FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. * * Bit fields: * 24: 1 = Channel 0 is idle * * IWM_FH_MEM_RSSR_SHARED_CTRL_REG and IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV * contain default values that should not be altered by the driver. */ #define IWM_FH_MEM_RSSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC40) #define IWM_FH_MEM_RSSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xD00) #define IWM_FH_MEM_RSSR_SHARED_CTRL_REG (IWM_FH_MEM_RSSR_LOWER_BOUND) #define IWM_FH_MEM_RSSR_RX_STATUS_REG (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x004) #define IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x008) #define IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) #define IWM_FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 /* TFDB Area - TFDs buffer table */ #define IWM_FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) #define IWM_FH_TFDIB_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x900) #define IWM_FH_TFDIB_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x958) #define IWM_FH_TFDIB_CTRL0_REG(_chnl) (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) #define IWM_FH_TFDIB_CTRL1_REG(_chnl) (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) /** * Transmit DMA Channel Control/Status Registers (TCSR) * * Device has one configuration register for each of 8 Tx DMA/FIFO channels * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. * * To use a Tx DMA channel, driver must initialize its * IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: * * IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | * IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL * * All other bits should be 0. * * Bit fields: * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, * '10' operate normally * 29- 4: Reserved, set to "0" * 3: Enable internal DMA requests (1, normal operation), disable (0) * 2- 0: Reserved, set to "0" */ #define IWM_FH_TCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xD00) #define IWM_FH_TCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xE60) /* Find Control/Status reg for given Tx DMA/FIFO channel */ #define IWM_FH_TCSR_CHNL_NUM (8) /* TCSR: tx_config register values */ #define IWM_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) #define IWM_FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) /** * Tx Shared Status Registers (TSSR) * * After stopping Tx DMA channel (writing 0 to * IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll * IWM_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle * (channel's buffers empty | no pending requests). * * Bit fields: * 31-24: 1 = Channel buffers empty (channel 7:0) * 23-16: 1 = No pending requests (channel 7:0) */ #define IWM_FH_TSSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xEA0) #define IWM_FH_TSSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xEC0) #define IWM_FH_TSSR_TX_STATUS_REG (IWM_FH_TSSR_LOWER_BOUND + 0x010) /** * Bit fields for TSSR(Tx Shared Status & Control) error status register: * 31: Indicates an address error when accessed to internal memory * uCode/driver must write "1" in order to clear this flag * 30: Indicates that Host did not send the expected number of dwords to FH * uCode/driver must write "1" in order to clear this flag * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA * command was received from the scheduler while the TRB was already full * with previous command * uCode/driver must write "1" in order to clear this flag * 7-0: Each status bit indicates a channel's TxCredit error. When an error * bit is set, it indicates that the FH has received a full indication * from the RTC TxFIFO and the current value of the TxCredit counter was * not equal to zero. This mean that the credit mechanism was not * synchronized to the TxFIFO status * uCode/driver must write "1" in order to clear this flag */ #define IWM_FH_TSSR_TX_ERROR_REG (IWM_FH_TSSR_LOWER_BOUND + 0x018) #define IWM_FH_TSSR_TX_MSG_CONFIG_REG (IWM_FH_TSSR_LOWER_BOUND + 0x008) #define IWM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) /* Tx service channels */ #define IWM_FH_SRVC_CHNL (9) #define IWM_FH_SRVC_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9C8) #define IWM_FH_SRVC_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0) #define IWM_FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ (IWM_FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) #define IWM_FH_TX_CHICKEN_BITS_REG (IWM_FH_MEM_LOWER_BOUND + 0xE98) #define IWM_FH_TX_TRB_REG(_chan) (IWM_FH_MEM_LOWER_BOUND + 0x958 + \ (_chan) * 4) /* Instruct FH to increment the retry count of a packet when * it is brought from the memory to TX-FIFO */ #define IWM_FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) #define IWM_RX_QUEUE_SIZE 256 #define IWM_RX_QUEUE_MASK 255 #define IWM_RX_QUEUE_SIZE_LOG 8 /* * RX related structures and functions */ #define IWM_RX_FREE_BUFFERS 64 #define IWM_RX_LOW_WATERMARK 8 /** * struct iwm_rb_status - reseve buffer status * host memory mapped FH registers * @closed_rb_num [0:11] - Indicates the index of the RB which was closed * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame * which was transferred */ struct iwm_rb_status { uint16_t closed_rb_num; uint16_t closed_fr_num; uint16_t finished_rb_num; uint16_t finished_fr_nam; uint32_t unused; } __packed; #define IWM_TFD_QUEUE_SIZE_MAX (256) #define IWM_TFD_QUEUE_SIZE_BC_DUP (64) #define IWM_TFD_QUEUE_BC_SIZE (IWM_TFD_QUEUE_SIZE_MAX + \ IWM_TFD_QUEUE_SIZE_BC_DUP) #define IWM_TX_DMA_MASK DMA_BIT_MASK(36) #define IWM_NUM_OF_TBS 20 static inline uint8_t iwm_get_dma_hi_addr(bus_addr_t addr) { return (sizeof(addr) > sizeof(uint32_t) ? (addr >> 16) >> 16 : 0) & 0xF; } /** * struct iwm_tfd_tb transmit buffer descriptor within transmit frame descriptor * * This structure contains dma address and length of transmission address * * @lo: low [31:0] portion of the dma address of TX buffer * every even is unaligned on 16 bit boundary * @hi_n_len 0-3 [35:32] portion of dma * 4-15 length of the tx buffer */ struct iwm_tfd_tb { uint32_t lo; uint16_t hi_n_len; } __packed; /** * struct iwm_tfd * * Transmit Frame Descriptor (TFD) * * @ __reserved1[3] reserved * @ num_tbs 0-4 number of active tbs * 5 reserved * 6-7 padding (not used) * @ tbs[20] transmit frame buffer descriptors * @ __pad padding * * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. * Both driver and device share these circular buffers, each of which must be * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes * * Driver must indicate the physical address of the base of each * circular buffer via the IWM_FH_MEM_CBBC_QUEUE registers. * * Each TFD contains pointer/size information for up to 20 data buffers * in host DRAM. These buffers collectively contain the (one) frame described * by the TFD. Each buffer must be a single contiguous block of memory within * itself, but buffers may be scattered in host DRAM. Each buffer has max size * of (4K - 4). The concatenates all of a TFD's buffers into a single * Tx frame, up to 8 KBytes in size. * * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. */ struct iwm_tfd { uint8_t __reserved1[3]; uint8_t num_tbs; struct iwm_tfd_tb tbs[IWM_NUM_OF_TBS]; uint32_t __pad; } __packed; /* Keep Warm Size */ #define IWM_KW_SIZE 0x1000 /* 4k */ /* Fixed (non-configurable) rx data from phy */ /** * struct iwm_agn_schedq_bc_tbl scheduler byte count table * base physical address provided by IWM_SCD_DRAM_BASE_ADDR * @tfd_offset 0-12 - tx command byte count * 12-16 - station index */ struct iwm_agn_scd_bc_tbl { uint16_t tfd_offset[IWM_TFD_QUEUE_BC_SIZE]; } __packed; /* maximal number of Tx queues in any platform */ #define IWM_MVM_MAX_QUEUES 20 /* Tx queue numbers */ enum { IWM_MVM_OFFCHANNEL_QUEUE = 8, IWM_MVM_CMD_QUEUE = 9, }; #define IWM_MVM_CMD_FIFO 7 #define IWM_MVM_STATION_COUNT 16 /* commands */ enum { IWM_MVM_ALIVE = 0x1, IWM_REPLY_ERROR = 0x2, IWM_INIT_COMPLETE_NOTIF = 0x4, /* PHY context commands */ IWM_PHY_CONTEXT_CMD = 0x8, IWM_DBG_CFG = 0x9, /* station table */ IWM_ADD_STA_KEY = 0x17, IWM_ADD_STA = 0x18, IWM_REMOVE_STA = 0x19, /* TX */ IWM_TX_CMD = 0x1c, IWM_TXPATH_FLUSH = 0x1e, IWM_MGMT_MCAST_KEY = 0x1f, /* global key */ IWM_WEP_KEY = 0x20, /* MAC and Binding commands */ IWM_MAC_CONTEXT_CMD = 0x28, IWM_TIME_EVENT_CMD = 0x29, /* both CMD and response */ IWM_TIME_EVENT_NOTIFICATION = 0x2a, IWM_BINDING_CONTEXT_CMD = 0x2b, IWM_TIME_QUOTA_CMD = 0x2c, IWM_NON_QOS_TX_COUNTER_CMD = 0x2d, IWM_LQ_CMD = 0x4e, /* Calibration */ IWM_TEMPERATURE_NOTIFICATION = 0x62, IWM_CALIBRATION_CFG_CMD = 0x65, IWM_CALIBRATION_RES_NOTIFICATION = 0x66, IWM_CALIBRATION_COMPLETE_NOTIFICATION = 0x67, IWM_RADIO_VERSION_NOTIFICATION = 0x68, /* Scan offload */ IWM_SCAN_OFFLOAD_REQUEST_CMD = 0x51, IWM_SCAN_OFFLOAD_ABORT_CMD = 0x52, IWM_SCAN_OFFLOAD_COMPLETE = 0x6D, IWM_SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, IWM_SCAN_OFFLOAD_CONFIG_CMD = 0x6f, IWM_MATCH_FOUND_NOTIFICATION = 0xd9, /* Phy */ IWM_PHY_CONFIGURATION_CMD = 0x6a, IWM_CALIB_RES_NOTIF_PHY_DB = 0x6b, /* IWM_PHY_DB_CMD = 0x6c, */ /* Power - legacy power table command */ IWM_POWER_TABLE_CMD = 0x77, IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78, /* Thermal Throttling*/ IWM_REPLY_THERMAL_MNG_BACKOFF = 0x7e, /* Scanning */ IWM_SCAN_REQUEST_CMD = 0x80, IWM_SCAN_ABORT_CMD = 0x81, IWM_SCAN_START_NOTIFICATION = 0x82, IWM_SCAN_RESULTS_NOTIFICATION = 0x83, IWM_SCAN_COMPLETE_NOTIFICATION = 0x84, /* NVM */ IWM_NVM_ACCESS_CMD = 0x88, IWM_SET_CALIB_DEFAULT_CMD = 0x8e, IWM_BEACON_NOTIFICATION = 0x90, IWM_BEACON_TEMPLATE_CMD = 0x91, IWM_TX_ANT_CONFIGURATION_CMD = 0x98, IWM_BT_CONFIG = 0x9b, IWM_STATISTICS_NOTIFICATION = 0x9d, IWM_REDUCE_TX_POWER_CMD = 0x9f, /* RF-KILL commands and notifications */ IWM_CARD_STATE_CMD = 0xa0, IWM_CARD_STATE_NOTIFICATION = 0xa1, IWM_MISSED_BEACONS_NOTIFICATION = 0xa2, /* Power - new power table command */ IWM_MAC_PM_POWER_TABLE = 0xa9, IWM_REPLY_RX_PHY_CMD = 0xc0, IWM_REPLY_RX_MPDU_CMD = 0xc1, IWM_BA_NOTIF = 0xc5, /* BT Coex */ IWM_BT_COEX_PRIO_TABLE = 0xcc, IWM_BT_COEX_PROT_ENV = 0xcd, IWM_BT_PROFILE_NOTIFICATION = 0xce, IWM_BT_COEX_CI = 0x5d, IWM_REPLY_SF_CFG_CMD = 0xd1, IWM_REPLY_BEACON_FILTERING_CMD = 0xd2, IWM_REPLY_DEBUG_CMD = 0xf0, IWM_DEBUG_LOG_MSG = 0xf7, IWM_MCAST_FILTER_CMD = 0xd0, /* D3 commands/notifications */ IWM_D3_CONFIG_CMD = 0xd3, IWM_PROT_OFFLOAD_CONFIG_CMD = 0xd4, IWM_OFFLOADS_QUERY_CMD = 0xd5, IWM_REMOTE_WAKE_CONFIG_CMD = 0xd6, /* for WoWLAN in particular */ IWM_WOWLAN_PATTERNS = 0xe0, IWM_WOWLAN_CONFIGURATION = 0xe1, IWM_WOWLAN_TSC_RSC_PARAM = 0xe2, IWM_WOWLAN_TKIP_PARAM = 0xe3, IWM_WOWLAN_KEK_KCK_MATERIAL = 0xe4, IWM_WOWLAN_GET_STATUSES = 0xe5, IWM_WOWLAN_TX_POWER_PER_DB = 0xe6, /* and for NetDetect */ IWM_NET_DETECT_CONFIG_CMD = 0x54, IWM_NET_DETECT_PROFILES_QUERY_CMD = 0x56, IWM_NET_DETECT_PROFILES_CMD = 0x57, IWM_NET_DETECT_HOTSPOTS_CMD = 0x58, IWM_NET_DETECT_HOTSPOTS_QUERY_CMD = 0x59, IWM_REPLY_MAX = 0xff, }; /** * struct iwm_cmd_response - generic response struct for most commands * @status: status of the command asked, changes for each one */ struct iwm_cmd_response { uint32_t status; }; /* * struct iwm_tx_ant_cfg_cmd * @valid: valid antenna configuration */ struct iwm_tx_ant_cfg_cmd { uint32_t valid; } __packed; /** * struct iwm_reduce_tx_power_cmd - TX power reduction command * IWM_REDUCE_TX_POWER_CMD = 0x9f * @flags: (reserved for future implementation) * @mac_context_id: id of the mac ctx for which we are reducing TX power. * @pwr_restriction: TX power restriction in dBms. */ struct iwm_reduce_tx_power_cmd { uint8_t flags; uint8_t mac_context_id; uint16_t pwr_restriction; } __packed; /* IWM_TX_REDUCED_POWER_API_S_VER_1 */ /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwm_calib_ctrl { uint32_t flow_trigger; uint32_t event_trigger; } __packed; /* This enum defines the bitmap of various calibrations to enable in both * init ucode and runtime ucode through IWM_CALIBRATION_CFG_CMD. */ enum iwm_calib_cfg { IWM_CALIB_CFG_XTAL_IDX = (1 << 0), IWM_CALIB_CFG_TEMPERATURE_IDX = (1 << 1), IWM_CALIB_CFG_VOLTAGE_READ_IDX = (1 << 2), IWM_CALIB_CFG_PAPD_IDX = (1 << 3), IWM_CALIB_CFG_TX_PWR_IDX = (1 << 4), IWM_CALIB_CFG_DC_IDX = (1 << 5), IWM_CALIB_CFG_BB_FILTER_IDX = (1 << 6), IWM_CALIB_CFG_LO_LEAKAGE_IDX = (1 << 7), IWM_CALIB_CFG_TX_IQ_IDX = (1 << 8), IWM_CALIB_CFG_TX_IQ_SKEW_IDX = (1 << 9), IWM_CALIB_CFG_RX_IQ_IDX = (1 << 10), IWM_CALIB_CFG_RX_IQ_SKEW_IDX = (1 << 11), IWM_CALIB_CFG_SENSITIVITY_IDX = (1 << 12), IWM_CALIB_CFG_CHAIN_NOISE_IDX = (1 << 13), IWM_CALIB_CFG_DISCONNECTED_ANT_IDX = (1 << 14), IWM_CALIB_CFG_ANT_COUPLING_IDX = (1 << 15), IWM_CALIB_CFG_DAC_IDX = (1 << 16), IWM_CALIB_CFG_ABS_IDX = (1 << 17), IWM_CALIB_CFG_AGC_IDX = (1 << 18), }; /* * Phy configuration command. */ struct iwm_phy_cfg_cmd { uint32_t phy_cfg; struct iwm_calib_ctrl calib_control; } __packed; #define IWM_PHY_CFG_RADIO_TYPE ((1 << 0) | (1 << 1)) #define IWM_PHY_CFG_RADIO_STEP ((1 << 2) | (1 << 3)) #define IWM_PHY_CFG_RADIO_DASH ((1 << 4) | (1 << 5)) #define IWM_PHY_CFG_PRODUCT_NUMBER ((1 << 6) | (1 << 7)) #define IWM_PHY_CFG_TX_CHAIN_A (1 << 8) #define IWM_PHY_CFG_TX_CHAIN_B (1 << 9) #define IWM_PHY_CFG_TX_CHAIN_C (1 << 10) #define IWM_PHY_CFG_RX_CHAIN_A (1 << 12) #define IWM_PHY_CFG_RX_CHAIN_B (1 << 13) #define IWM_PHY_CFG_RX_CHAIN_C (1 << 14) /* Target of the IWM_NVM_ACCESS_CMD */ enum { IWM_NVM_ACCESS_TARGET_CACHE = 0, IWM_NVM_ACCESS_TARGET_OTP = 1, IWM_NVM_ACCESS_TARGET_EEPROM = 2, }; /* Section types for IWM_NVM_ACCESS_CMD */ enum { IWM_NVM_SECTION_TYPE_HW = 0, IWM_NVM_SECTION_TYPE_SW, IWM_NVM_SECTION_TYPE_PAPD, IWM_NVM_SECTION_TYPE_BT, IWM_NVM_SECTION_TYPE_CALIBRATION, IWM_NVM_SECTION_TYPE_PRODUCTION, IWM_NVM_SECTION_TYPE_POST_FCS_CALIB, IWM_NVM_NUM_OF_SECTIONS, }; /** * struct iwm_nvm_access_cmd_ver2 - Request the device to send an NVM section * @op_code: 0 - read, 1 - write * @target: IWM_NVM_ACCESS_TARGET_* * @type: IWM_NVM_SECTION_TYPE_* * @offset: offset in bytes into the section * @length: in bytes, to read/write * @data: if write operation, the data to write. On read its empty */ struct iwm_nvm_access_cmd { uint8_t op_code; uint8_t target; uint16_t type; uint16_t offset; uint16_t length; uint8_t data[]; } __packed; /* IWM_NVM_ACCESS_CMD_API_S_VER_2 */ /** * struct iwm_nvm_access_resp_ver2 - response to IWM_NVM_ACCESS_CMD * @offset: offset in bytes into the section * @length: in bytes, either how much was written or read * @type: IWM_NVM_SECTION_TYPE_* * @status: 0 for success, fail otherwise * @data: if read operation, the data returned. Empty on write. */ struct iwm_nvm_access_resp { uint16_t offset; uint16_t length; uint16_t type; uint16_t status; uint8_t data[]; } __packed; /* IWM_NVM_ACCESS_CMD_RESP_API_S_VER_2 */ /* IWM_MVM_ALIVE 0x1 */ /* alive response is_valid values */ #define IWM_ALIVE_RESP_UCODE_OK (1 << 0) #define IWM_ALIVE_RESP_RFKILL (1 << 1) /* alive response ver_type values */ enum { IWM_FW_TYPE_HW = 0, IWM_FW_TYPE_PROT = 1, IWM_FW_TYPE_AP = 2, IWM_FW_TYPE_WOWLAN = 3, IWM_FW_TYPE_TIMING = 4, IWM_FW_TYPE_WIPAN = 5 }; /* alive response ver_subtype values */ enum { IWM_FW_SUBTYPE_FULL_FEATURE = 0, IWM_FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */ IWM_FW_SUBTYPE_REDUCED = 2, IWM_FW_SUBTYPE_ALIVE_ONLY = 3, IWM_FW_SUBTYPE_WOWLAN = 4, IWM_FW_SUBTYPE_AP_SUBTYPE = 5, IWM_FW_SUBTYPE_WIPAN = 6, IWM_FW_SUBTYPE_INITIALIZE = 9 }; #define IWM_ALIVE_STATUS_ERR 0xDEAD #define IWM_ALIVE_STATUS_OK 0xCAFE #define IWM_ALIVE_FLG_RFKILL (1 << 0) struct iwm_mvm_alive_resp { uint16_t status; uint16_t flags; uint8_t ucode_minor; uint8_t ucode_major; uint16_t id; uint8_t api_minor; uint8_t api_major; uint8_t ver_subtype; uint8_t ver_type; uint8_t mac; uint8_t opt; uint16_t reserved2; uint32_t timestamp; uint32_t error_event_table_ptr; /* SRAM address for error log */ uint32_t log_event_table_ptr; /* SRAM address for event log */ uint32_t cpu_register_ptr; uint32_t dbgm_config_ptr; uint32_t alive_counter_ptr; uint32_t scd_base_ptr; /* SRAM address for SCD */ } __packed; /* IWM_ALIVE_RES_API_S_VER_1 */ /* Error response/notification */ enum { IWM_FW_ERR_UNKNOWN_CMD = 0x0, IWM_FW_ERR_INVALID_CMD_PARAM = 0x1, IWM_FW_ERR_SERVICE = 0x2, IWM_FW_ERR_ARC_MEMORY = 0x3, IWM_FW_ERR_ARC_CODE = 0x4, IWM_FW_ERR_WATCH_DOG = 0x5, IWM_FW_ERR_WEP_GRP_KEY_INDX = 0x10, IWM_FW_ERR_WEP_KEY_SIZE = 0x11, IWM_FW_ERR_OBSOLETE_FUNC = 0x12, IWM_FW_ERR_UNEXPECTED = 0xFE, IWM_FW_ERR_FATAL = 0xFF }; /** * struct iwm_error_resp - FW error indication * ( IWM_REPLY_ERROR = 0x2 ) * @error_type: one of IWM_FW_ERR_* * @cmd_id: the command ID for which the error occured * @bad_cmd_seq_num: sequence number of the erroneous command * @error_service: which service created the error, applicable only if * error_type = 2, otherwise 0 * @timestamp: TSF in usecs. */ struct iwm_error_resp { uint32_t error_type; uint8_t cmd_id; uint8_t reserved1; uint16_t bad_cmd_seq_num; uint32_t error_service; uint64_t timestamp; } __packed; /* Common PHY, MAC and Bindings definitions */ #define IWM_MAX_MACS_IN_BINDING (3) #define IWM_MAX_BINDINGS (4) #define IWM_AUX_BINDING_INDEX (3) #define IWM_MAX_PHYS (4) /* Used to extract ID and color from the context dword */ #define IWM_FW_CTXT_ID_POS (0) #define IWM_FW_CTXT_ID_MSK (0xff << IWM_FW_CTXT_ID_POS) #define IWM_FW_CTXT_COLOR_POS (8) #define IWM_FW_CTXT_COLOR_MSK (0xff << IWM_FW_CTXT_COLOR_POS) #define IWM_FW_CTXT_INVALID (0xffffffff) #define IWM_FW_CMD_ID_AND_COLOR(_id, _color) ((_id << IWM_FW_CTXT_ID_POS) |\ (_color << IWM_FW_CTXT_COLOR_POS)) /* Possible actions on PHYs, MACs and Bindings */ enum { IWM_FW_CTXT_ACTION_STUB = 0, IWM_FW_CTXT_ACTION_ADD, IWM_FW_CTXT_ACTION_MODIFY, IWM_FW_CTXT_ACTION_REMOVE, IWM_FW_CTXT_ACTION_NUM }; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ /* Time Events */ /* Time Event types, according to MAC type */ enum iwm_time_event_type { /* BSS Station Events */ IWM_TE_BSS_STA_AGGRESSIVE_ASSOC, IWM_TE_BSS_STA_ASSOC, IWM_TE_BSS_EAP_DHCP_PROT, IWM_TE_BSS_QUIET_PERIOD, /* P2P Device Events */ IWM_TE_P2P_DEVICE_DISCOVERABLE, IWM_TE_P2P_DEVICE_LISTEN, IWM_TE_P2P_DEVICE_ACTION_SCAN, IWM_TE_P2P_DEVICE_FULL_SCAN, /* P2P Client Events */ IWM_TE_P2P_CLIENT_AGGRESSIVE_ASSOC, IWM_TE_P2P_CLIENT_ASSOC, IWM_TE_P2P_CLIENT_QUIET_PERIOD, /* P2P GO Events */ IWM_TE_P2P_GO_ASSOC_PROT, IWM_TE_P2P_GO_REPETITIVE_NOA, IWM_TE_P2P_GO_CT_WINDOW, /* WiDi Sync Events */ IWM_TE_WIDI_TX_SYNC, IWM_TE_MAX }; /* IWM_MAC_EVENT_TYPE_API_E_VER_1 */ /* Time event - defines for command API v1 */ /* * @IWM_TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. * @IWM_TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @IWM_TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @IWM_TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ enum { IWM_TE_V1_FRAG_NONE = 0, IWM_TE_V1_FRAG_SINGLE = 1, IWM_TE_V1_FRAG_DUAL = 2, IWM_TE_V1_FRAG_ENDLESS = 0xffffffff }; /* If a Time Event can be fragmented, this is the max number of fragments */ #define IWM_TE_V1_FRAG_MAX_MSK 0x0fffffff /* Repeat the time event endlessly (until removed) */ #define IWM_TE_V1_REPEAT_ENDLESS 0xffffffff /* If a Time Event has bounded repetitions, this is the maximal value */ #define IWM_TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff /* Time Event dependencies: none, on another TE, or in a specific time */ enum { IWM_TE_V1_INDEPENDENT = 0, IWM_TE_V1_DEP_OTHER = (1 << 0), IWM_TE_V1_DEP_TSF = (1 << 1), IWM_TE_V1_EVENT_SOCIOPATHIC = (1 << 2), }; /* IWM_MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ /* * @IWM_TE_V1_NOTIF_NONE: no notifications * @IWM_TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start * @IWM_TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end * @IWM_TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use * @IWM_TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. * @IWM_TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @IWM_TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @IWM_TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. * @IWM_TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. * * Supported Time event notifications configuration. * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. */ enum { IWM_TE_V1_NOTIF_NONE = 0, IWM_TE_V1_NOTIF_HOST_EVENT_START = (1 << 0), IWM_TE_V1_NOTIF_HOST_EVENT_END = (1 << 1), IWM_TE_V1_NOTIF_INTERNAL_EVENT_START = (1 << 2), IWM_TE_V1_NOTIF_INTERNAL_EVENT_END = (1 << 3), IWM_TE_V1_NOTIF_HOST_FRAG_START = (1 << 4), IWM_TE_V1_NOTIF_HOST_FRAG_END = (1 << 5), IWM_TE_V1_NOTIF_INTERNAL_FRAG_START = (1 << 6), IWM_TE_V1_NOTIF_INTERNAL_FRAG_END = (1 << 7), }; /* IWM_MAC_EVENT_ACTION_API_E_VER_2 */ /** * struct iwm_time_event_cmd_api_v1 - configuring Time Events * with struct IWM_MAC_TIME_EVENT_DATA_API_S_VER_1 (see also * with version 2. determined by IWM_UCODE_TLV_FLAGS) * ( IWM_TIME_EVENT_CMD = 0x29 ) * @id_and_color: ID and color of the relevant MAC * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @id: this field has two meanings, depending on the action: * If the action is ADD, then it means the type of event to add. * For all other actions it is the unique event ID assigned when the * event was added by the FW. * @apply_time: When to start the Time Event (in GP2) * @max_delay: maximum delay to event's start (apply time), in TU * @depends_on: the unique ID of the event we depend on (if any) * @interval: interval between repetitions, in TU * @interval_reciprocal: 2^32 / interval * @duration: duration of event in TU * @repeat: how many repetitions to do, can be IWM_TE_REPEAT_ENDLESS * @dep_policy: one of IWM_TE_V1_INDEPENDENT, IWM_TE_V1_DEP_OTHER, IWM_TE_V1_DEP_TSF * and IWM_TE_V1_EVENT_SOCIOPATHIC * @is_present: 0 or 1, are we present or absent during the Time Event * @max_frags: maximal number of fragments the Time Event can be divided to * @notify: notifications using IWM_TE_V1_NOTIF_* (whom to notify when) */ struct iwm_time_event_cmd_v1 { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; uint32_t id; /* IWM_MAC_TIME_EVENT_DATA_API_S_VER_1 */ uint32_t apply_time; uint32_t max_delay; uint32_t dep_policy; uint32_t depends_on; uint32_t is_present; uint32_t max_frags; uint32_t interval; uint32_t interval_reciprocal; uint32_t duration; uint32_t repeat; uint32_t notify; } __packed; /* IWM_MAC_TIME_EVENT_CMD_API_S_VER_1 */ /* Time event - defines for command API v2 */ /* * @IWM_TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. * @IWM_TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @IWM_TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @IWM_TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ enum { IWM_TE_V2_FRAG_NONE = 0, IWM_TE_V2_FRAG_SINGLE = 1, IWM_TE_V2_FRAG_DUAL = 2, IWM_TE_V2_FRAG_MAX = 0xfe, IWM_TE_V2_FRAG_ENDLESS = 0xff }; /* Repeat the time event endlessly (until removed) */ #define IWM_TE_V2_REPEAT_ENDLESS 0xff /* If a Time Event has bounded repetitions, this is the maximal value */ #define IWM_TE_V2_REPEAT_MAX 0xfe #define IWM_TE_V2_PLACEMENT_POS 12 #define IWM_TE_V2_ABSENCE_POS 15 /* Time event policy values (for time event cmd api v2) * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. * * @IWM_TE_V2_DEFAULT_POLICY: independent, social, present, unoticable * @IWM_TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start * @IWM_TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end * @IWM_TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use * @IWM_TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. * @IWM_TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @IWM_TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @IWM_TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. * @IWM_TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. * @IWM_TE_V2_DEP_OTHER: depends on another time event * @IWM_TE_V2_DEP_TSF: depends on a specific time * @IWM_TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC * @IWM_TE_V2_ABSENCE: are we present or absent during the Time Event. */ enum { IWM_TE_V2_DEFAULT_POLICY = 0x0, /* notifications (event start/stop, fragment start/stop) */ IWM_TE_V2_NOTIF_HOST_EVENT_START = (1 << 0), IWM_TE_V2_NOTIF_HOST_EVENT_END = (1 << 1), IWM_TE_V2_NOTIF_INTERNAL_EVENT_START = (1 << 2), IWM_TE_V2_NOTIF_INTERNAL_EVENT_END = (1 << 3), IWM_TE_V2_NOTIF_HOST_FRAG_START = (1 << 4), IWM_TE_V2_NOTIF_HOST_FRAG_END = (1 << 5), IWM_TE_V2_NOTIF_INTERNAL_FRAG_START = (1 << 6), IWM_TE_V2_NOTIF_INTERNAL_FRAG_END = (1 << 7), IWM_TE_V2_NOTIF_MSK = 0xff, /* placement characteristics */ IWM_TE_V2_DEP_OTHER = (1 << IWM_TE_V2_PLACEMENT_POS), IWM_TE_V2_DEP_TSF = (1 << (IWM_TE_V2_PLACEMENT_POS + 1)), IWM_TE_V2_EVENT_SOCIOPATHIC = (1 << (IWM_TE_V2_PLACEMENT_POS + 2)), /* are we present or absent during the Time Event. */ IWM_TE_V2_ABSENCE = (1 << IWM_TE_V2_ABSENCE_POS), }; /** * struct iwm_time_event_cmd_api_v2 - configuring Time Events * with struct IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 (see also * with version 1. determined by IWM_UCODE_TLV_FLAGS) * ( IWM_TIME_EVENT_CMD = 0x29 ) * @id_and_color: ID and color of the relevant MAC * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @id: this field has two meanings, depending on the action: * If the action is ADD, then it means the type of event to add. * For all other actions it is the unique event ID assigned when the * event was added by the FW. * @apply_time: When to start the Time Event (in GP2) * @max_delay: maximum delay to event's start (apply time), in TU * @depends_on: the unique ID of the event we depend on (if any) * @interval: interval between repetitions, in TU * @duration: duration of event in TU * @repeat: how many repetitions to do, can be IWM_TE_REPEAT_ENDLESS * @max_frags: maximal number of fragments the Time Event can be divided to * @policy: defines whether uCode shall notify the host or other uCode modules * on event and/or fragment start and/or end * using one of IWM_TE_INDEPENDENT, IWM_TE_DEP_OTHER, IWM_TE_DEP_TSF * IWM_TE_EVENT_SOCIOPATHIC * using IWM_TE_ABSENCE and using IWM_TE_NOTIF_* */ struct iwm_time_event_cmd_v2 { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; uint32_t id; /* IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 */ uint32_t apply_time; uint32_t max_delay; uint32_t depends_on; uint32_t interval; uint32_t duration; uint8_t repeat; uint8_t max_frags; uint16_t policy; } __packed; /* IWM_MAC_TIME_EVENT_CMD_API_S_VER_2 */ /** * struct iwm_time_event_resp - response structure to iwm_time_event_cmd * @status: bit 0 indicates success, all others specify errors * @id: the Time Event type * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE * @id_and_color: ID and color of the relevant MAC */ struct iwm_time_event_resp { uint32_t status; uint32_t id; uint32_t unique_id; uint32_t id_and_color; } __packed; /* IWM_MAC_TIME_EVENT_RSP_API_S_VER_1 */ /** * struct iwm_time_event_notif - notifications of time event start/stop * ( IWM_TIME_EVENT_NOTIFICATION = 0x2a ) * @timestamp: action timestamp in GP2 * @session_id: session's unique id * @unique_id: unique id of the Time Event itself * @id_and_color: ID and color of the relevant MAC * @action: one of IWM_TE_NOTIF_START or IWM_TE_NOTIF_END * @status: true if scheduled, false otherwise (not executed) */ struct iwm_time_event_notif { uint32_t timestamp; uint32_t session_id; uint32_t unique_id; uint32_t id_and_color; uint32_t action; uint32_t status; } __packed; /* IWM_MAC_TIME_EVENT_NTFY_API_S_VER_1 */ /* Bindings and Time Quota */ /** * struct iwm_binding_cmd - configuring bindings * ( IWM_BINDING_CONTEXT_CMD = 0x2b ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @macs: array of MAC id and colors which belong to the binding * @phy: PHY id and color which belongs to the binding */ struct iwm_binding_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_BINDING_DATA_API_S_VER_1 */ uint32_t macs[IWM_MAX_MACS_IN_BINDING]; uint32_t phy; } __packed; /* IWM_BINDING_CMD_API_S_VER_1 */ /* The maximal number of fragments in the FW's schedule session */ #define IWM_MVM_MAX_QUOTA 128 /** * struct iwm_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding * @quota: absolute time quota in TU. The scheduler will try to divide the * remainig quota (after Time Events) according to this quota. * @max_duration: max uninterrupted context duration in TU */ struct iwm_time_quota_data { uint32_t id_and_color; uint32_t quota; uint32_t max_duration; } __packed; /* IWM_TIME_QUOTA_DATA_API_S_VER_1 */ /** * struct iwm_time_quota_cmd - configuration of time quota between bindings * ( IWM_TIME_QUOTA_CMD = 0x2c ) * @quotas: allocations per binding */ struct iwm_time_quota_cmd { struct iwm_time_quota_data quotas[IWM_MAX_BINDINGS]; } __packed; /* IWM_TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ /* PHY context */ /* Supported bands */ #define IWM_PHY_BAND_5 (0) #define IWM_PHY_BAND_24 (1) /* Supported channel width, vary if there is VHT support */ #define IWM_PHY_VHT_CHANNEL_MODE20 (0x0) #define IWM_PHY_VHT_CHANNEL_MODE40 (0x1) #define IWM_PHY_VHT_CHANNEL_MODE80 (0x2) #define IWM_PHY_VHT_CHANNEL_MODE160 (0x3) /* * Control channel position: * For legacy set bit means upper channel, otherwise lower. * For VHT - bit-2 marks if the control is lower/upper relative to center-freq * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. * center_freq * | * 40Mhz |_______|_______| * 80Mhz |_______|_______|_______|_______| * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| * code 011 010 001 000 | 100 101 110 111 */ #define IWM_PHY_VHT_CTRL_POS_1_BELOW (0x0) #define IWM_PHY_VHT_CTRL_POS_2_BELOW (0x1) #define IWM_PHY_VHT_CTRL_POS_3_BELOW (0x2) #define IWM_PHY_VHT_CTRL_POS_4_BELOW (0x3) #define IWM_PHY_VHT_CTRL_POS_1_ABOVE (0x4) #define IWM_PHY_VHT_CTRL_POS_2_ABOVE (0x5) #define IWM_PHY_VHT_CTRL_POS_3_ABOVE (0x6) #define IWM_PHY_VHT_CTRL_POS_4_ABOVE (0x7) /* * @band: IWM_PHY_BAND_* * @channel: channel number * @width: PHY_[VHT|LEGACY]_CHANNEL_* * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* */ struct iwm_fw_channel_info { uint8_t band; uint8_t channel; uint8_t width; uint8_t ctrl_pos; } __packed; #define IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS (0) #define IWM_PHY_RX_CHAIN_DRIVER_FORCE_MSK \ (0x1 << IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS) #define IWM_PHY_RX_CHAIN_VALID_POS (1) #define IWM_PHY_RX_CHAIN_VALID_MSK \ (0x7 << IWM_PHY_RX_CHAIN_VALID_POS) #define IWM_PHY_RX_CHAIN_FORCE_SEL_POS (4) #define IWM_PHY_RX_CHAIN_FORCE_SEL_MSK \ (0x7 << IWM_PHY_RX_CHAIN_FORCE_SEL_POS) #define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) #define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ (0x7 << IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) #define IWM_PHY_RX_CHAIN_CNT_POS (10) #define IWM_PHY_RX_CHAIN_CNT_MSK \ (0x3 << IWM_PHY_RX_CHAIN_CNT_POS) #define IWM_PHY_RX_CHAIN_MIMO_CNT_POS (12) #define IWM_PHY_RX_CHAIN_MIMO_CNT_MSK \ (0x3 << IWM_PHY_RX_CHAIN_MIMO_CNT_POS) #define IWM_PHY_RX_CHAIN_MIMO_FORCE_POS (14) #define IWM_PHY_RX_CHAIN_MIMO_FORCE_MSK \ (0x1 << IWM_PHY_RX_CHAIN_MIMO_FORCE_POS) /* TODO: fix the value, make it depend on firmware at runtime? */ #define IWM_NUM_PHY_CTX 3 /* TODO: complete missing documentation */ /** * struct iwm_phy_context_cmd - config of the PHY context * ( IWM_PHY_CONTEXT_CMD = 0x8 ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @apply_time: 0 means immediate apply and context switch. * other value means apply new params after X usecs * @tx_param_color: ??? * @channel_info: * @txchain_info: ??? * @rxchain_info: ??? * @acquisition_data: ??? * @dsp_cfg_flags: set to 0 */ struct iwm_phy_context_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_PHY_CONTEXT_DATA_API_S_VER_1 */ uint32_t apply_time; uint32_t tx_param_color; struct iwm_fw_channel_info ci; uint32_t txchain_info; uint32_t rxchain_info; uint32_t acquisition_data; uint32_t dsp_cfg_flags; } __packed; /* IWM_PHY_CONTEXT_CMD_API_VER_1 */ #define IWM_RX_INFO_PHY_CNT 8 #define IWM_RX_INFO_ENERGY_ANT_ABC_IDX 1 #define IWM_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff #define IWM_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00 #define IWM_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000 #define IWM_RX_INFO_ENERGY_ANT_A_POS 0 #define IWM_RX_INFO_ENERGY_ANT_B_POS 8 #define IWM_RX_INFO_ENERGY_ANT_C_POS 16 #define IWM_RX_INFO_AGC_IDX 1 #define IWM_RX_INFO_RSSI_AB_IDX 2 #define IWM_OFDM_AGC_A_MSK 0x0000007f #define IWM_OFDM_AGC_A_POS 0 #define IWM_OFDM_AGC_B_MSK 0x00003f80 #define IWM_OFDM_AGC_B_POS 7 #define IWM_OFDM_AGC_CODE_MSK 0x3fe00000 #define IWM_OFDM_AGC_CODE_POS 20 #define IWM_OFDM_RSSI_INBAND_A_MSK 0x00ff #define IWM_OFDM_RSSI_A_POS 0 #define IWM_OFDM_RSSI_ALLBAND_A_MSK 0xff00 #define IWM_OFDM_RSSI_ALLBAND_A_POS 8 #define IWM_OFDM_RSSI_INBAND_B_MSK 0xff0000 #define IWM_OFDM_RSSI_B_POS 16 #define IWM_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 #define IWM_OFDM_RSSI_ALLBAND_B_POS 24 /** * struct iwm_rx_phy_info - phy info * (IWM_REPLY_RX_PHY_CMD = 0xc0) * @non_cfg_phy_cnt: non configurable DSP phy data byte count * @cfg_phy_cnt: configurable DSP phy data byte count * @stat_id: configurable DSP phy data set ID * @reserved1: * @system_timestamp: GP2 at on air rise * @timestamp: TSF at on air rise * @beacon_time_stamp: beacon at on-air rise * @phy_flags: general phy flags: band, modulation, ... * @channel: channel number * @non_cfg_phy_buf: for various implementations of non_cfg_phy * @rate_n_flags: IWM_RATE_MCS_* * @byte_count: frame's byte-count * @frame_time: frame's time on the air, based on byte count and frame rate * calculation * @mac_active_msk: what MACs were active when the frame was received * * Before each Rx, the device sends this data. It contains PHY information * about the reception of the packet. */ struct iwm_rx_phy_info { uint8_t non_cfg_phy_cnt; uint8_t cfg_phy_cnt; uint8_t stat_id; uint8_t reserved1; uint32_t system_timestamp; uint64_t timestamp; uint32_t beacon_time_stamp; uint16_t phy_flags; #define IWM_PHY_INFO_FLAG_SHPREAMBLE (1 << 2) uint16_t channel; uint32_t non_cfg_phy[IWM_RX_INFO_PHY_CNT]; uint8_t rate; uint8_t rflags; uint16_t xrflags; uint32_t byte_count; uint16_t mac_active_msk; uint16_t frame_time; } __packed; struct iwm_rx_mpdu_res_start { uint16_t byte_count; uint16_t reserved; } __packed; /** * enum iwm_rx_phy_flags - to parse %iwm_rx_phy_info phy_flags * @IWM_RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band * @IWM_RX_RES_PHY_FLAGS_MOD_CCK: * @IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short * @IWM_RX_RES_PHY_FLAGS_NARROW_BAND: * @IWM_RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received * @IWM_RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU * @IWM_RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame * @IWM_RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble * @IWM_RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame */ enum iwm_rx_phy_flags { IWM_RX_RES_PHY_FLAGS_BAND_24 = (1 << 0), IWM_RX_RES_PHY_FLAGS_MOD_CCK = (1 << 1), IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE = (1 << 2), IWM_RX_RES_PHY_FLAGS_NARROW_BAND = (1 << 3), IWM_RX_RES_PHY_FLAGS_ANTENNA = (0x7 << 4), IWM_RX_RES_PHY_FLAGS_ANTENNA_POS = 4, IWM_RX_RES_PHY_FLAGS_AGG = (1 << 7), IWM_RX_RES_PHY_FLAGS_OFDM_HT = (1 << 8), IWM_RX_RES_PHY_FLAGS_OFDM_GF = (1 << 9), IWM_RX_RES_PHY_FLAGS_OFDM_VHT = (1 << 10), }; /** * enum iwm_mvm_rx_status - written by fw for each Rx packet * @IWM_RX_MPDU_RES_STATUS_CRC_OK: CRC is fine * @IWM_RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow * @IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND: * @IWM_RX_MPDU_RES_STATUS_KEY_VALID: * @IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK: * @IWM_RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed * @IWM_RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked * in the driver. * @IWM_RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine * @IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or * alg = CCM only. Checks replay attack for 11w frames. Relevant only if * %IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set. * @IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted * @IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP * @IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM * @IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP * @IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC * @IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted * @IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm * @IWM_RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted * @IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP: * @IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP: * @IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT: * @IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame * @IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK: * @IWM_RX_MPDU_RES_STATUS_STA_ID_MSK: * @IWM_RX_MPDU_RES_STATUS_RRF_KILL: * @IWM_RX_MPDU_RES_STATUS_FILTERING_MSK: * @IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK: */ enum iwm_mvm_rx_status { IWM_RX_MPDU_RES_STATUS_CRC_OK = (1 << 0), IWM_RX_MPDU_RES_STATUS_OVERRUN_OK = (1 << 1), IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND = (1 << 2), IWM_RX_MPDU_RES_STATUS_KEY_VALID = (1 << 3), IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK = (1 << 4), IWM_RX_MPDU_RES_STATUS_ICV_OK = (1 << 5), IWM_RX_MPDU_RES_STATUS_MIC_OK = (1 << 6), IWM_RX_MPDU_RES_STATUS_TTAK_OK = (1 << 7), IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR = (1 << 7), IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC = (0 << 8), IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC = (1 << 8), IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC = (2 << 8), IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC = (3 << 8), IWM_RX_MPDU_RES_STATUS_SEC_EXT_ENC = (4 << 8), IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC = (6 << 8), IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR = (7 << 8), IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK = (7 << 8), IWM_RX_MPDU_RES_STATUS_DEC_DONE = (1 << 11), IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP = (1 << 12), IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP = (1 << 13), IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT = (1 << 14), IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME = (1 << 15), IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK = (0x3F0000), IWM_RX_MPDU_RES_STATUS_STA_ID_MSK = (0x1f000000), IWM_RX_MPDU_RES_STATUS_RRF_KILL = (1 << 29), IWM_RX_MPDU_RES_STATUS_FILTERING_MSK = (0xc00000), IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK = (0xc0000000), }; /** * struct iwm_radio_version_notif - information on the radio version * ( IWM_RADIO_VERSION_NOTIFICATION = 0x68 ) * @radio_flavor: * @radio_step: * @radio_dash: */ struct iwm_radio_version_notif { uint32_t radio_flavor; uint32_t radio_step; uint32_t radio_dash; } __packed; /* IWM_RADIO_VERSION_NOTOFICATION_S_VER_1 */ enum iwm_card_state_flags { IWM_CARD_ENABLED = 0x00, IWM_HW_CARD_DISABLED = 0x01, IWM_SW_CARD_DISABLED = 0x02, IWM_CT_KILL_CARD_DISABLED = 0x04, IWM_HALT_CARD_DISABLED = 0x08, IWM_CARD_DISABLED_MSK = 0x0f, IWM_CARD_IS_RX_ON = 0x10, }; /** * struct iwm_radio_version_notif - information on the radio version * (IWM_CARD_STATE_NOTIFICATION = 0xa1 ) * @flags: %iwm_card_state_flags */ struct iwm_card_state_notif { uint32_t flags; } __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ /** * struct iwm_missed_beacons_notif - information on missed beacons * ( IWM_MISSED_BEACONS_NOTIFICATION = 0xa2 ) * @mac_id: interface ID * @consec_missed_beacons_since_last_rx: number of consecutive missed * beacons since last RX. * @consec_missed_beacons: number of consecutive missed beacons * @num_expected_beacons: * @num_recvd_beacons: */ struct iwm_missed_beacons_notif { uint32_t mac_id; uint32_t consec_missed_beacons_since_last_rx; uint32_t consec_missed_beacons; uint32_t num_expected_beacons; uint32_t num_recvd_beacons; } __packed; /* IWM_MISSED_BEACON_NTFY_API_S_VER_3 */ /** * struct iwm_set_calib_default_cmd - set default value for calibration. * ( IWM_SET_CALIB_DEFAULT_CMD = 0x8e ) * @calib_index: the calibration to set value for * @length: of data * @data: the value to set for the calibration result */ struct iwm_set_calib_default_cmd { uint16_t calib_index; uint16_t length; uint8_t data[0]; } __packed; /* IWM_PHY_CALIB_OVERRIDE_VALUES_S */ #define IWM_MAX_PORT_ID_NUM 2 #define IWM_MAX_MCAST_FILTERING_ADDRESSES 256 /** * struct iwm_mcast_filter_cmd - configure multicast filter. * @filter_own: Set 1 to filter out multicast packets sent by station itself * @port_id: Multicast MAC addresses array specifier. This is a strange way * to identify network interface adopted in host-device IF. * It is used by FW as index in array of addresses. This array has * IWM_MAX_PORT_ID_NUM members. * @count: Number of MAC addresses in the array * @pass_all: Set 1 to pass all multicast packets. * @bssid: current association BSSID. * @addr_list: Place holder for array of MAC addresses. * IMPORTANT: add padding if necessary to ensure DWORD alignment. */ struct iwm_mcast_filter_cmd { uint8_t filter_own; uint8_t port_id; uint8_t count; uint8_t pass_all; uint8_t bssid[6]; uint8_t reserved[2]; uint8_t addr_list[0]; } __packed; /* IWM_MCAST_FILTERING_CMD_API_S_VER_1 */ struct iwm_mvm_statistics_dbg { uint32_t burst_check; uint32_t burst_count; uint32_t wait_for_silence_timeout_cnt; uint32_t reserved[3]; } __packed; /* IWM_STATISTICS_DEBUG_API_S_VER_2 */ struct iwm_mvm_statistics_div { uint32_t tx_on_a; uint32_t tx_on_b; uint32_t exec_time; uint32_t probe_time; uint32_t rssi_ant; uint32_t reserved2; } __packed; /* IWM_STATISTICS_SLOW_DIV_API_S_VER_2 */ struct iwm_mvm_statistics_general_common { uint32_t temperature; /* radio temperature */ uint32_t temperature_m; /* radio voltage */ struct iwm_mvm_statistics_dbg dbg; uint32_t sleep_time; uint32_t slots_out; uint32_t slots_idle; uint32_t ttl_timestamp; struct iwm_mvm_statistics_div div; uint32_t rx_enable_counter; /* * num_of_sos_states: * count the number of times we have to re-tune * in order to get out of bad PHY status */ uint32_t num_of_sos_states; } __packed; /* IWM_STATISTICS_GENERAL_API_S_VER_5 */ struct iwm_mvm_statistics_rx_non_phy { uint32_t bogus_cts; /* CTS received when not expecting CTS */ uint32_t bogus_ack; /* ACK received when not expecting ACK */ uint32_t non_bssid_frames; /* number of frames with BSSID that * doesn't belong to the STA BSSID */ uint32_t filtered_frames; /* count frames that were dumped in the * filtering process */ uint32_t non_channel_beacons; /* beacons with our bss id but not on * our serving channel */ uint32_t channel_beacons; /* beacons with our bss id and in our * serving channel */ uint32_t num_missed_bcon; /* number of missed beacons */ uint32_t adc_rx_saturation_time; /* count in 0.8us units the time the * ADC was in saturation */ uint32_t ina_detection_search_time;/* total time (in 0.8us) searched * for INA */ uint32_t beacon_silence_rssi[3];/* RSSI silence after beacon frame */ uint32_t interference_data_flag; /* flag for interference data * availability. 1 when data is * available. */ uint32_t channel_load; /* counts RX Enable time in uSec */ uint32_t dsp_false_alarms; /* DSP false alarm (both OFDM * and CCK) counter */ uint32_t beacon_rssi_a; uint32_t beacon_rssi_b; uint32_t beacon_rssi_c; uint32_t beacon_energy_a; uint32_t beacon_energy_b; uint32_t beacon_energy_c; uint32_t num_bt_kills; uint32_t mac_id; uint32_t directed_data_mpdu; } __packed; /* IWM_STATISTICS_RX_NON_PHY_API_S_VER_3 */ struct iwm_mvm_statistics_rx_phy { uint32_t ina_cnt; uint32_t fina_cnt; uint32_t plcp_err; uint32_t crc32_err; uint32_t overrun_err; uint32_t early_overrun_err; uint32_t crc32_good; uint32_t false_alarm_cnt; uint32_t fina_sync_err_cnt; uint32_t sfd_timeout; uint32_t fina_timeout; uint32_t unresponded_rts; uint32_t rxe_frame_limit_overrun; uint32_t sent_ack_cnt; uint32_t sent_cts_cnt; uint32_t sent_ba_rsp_cnt; uint32_t dsp_self_kill; uint32_t mh_format_err; uint32_t re_acq_main_rssi_sum; uint32_t reserved; } __packed; /* IWM_STATISTICS_RX_PHY_API_S_VER_2 */ struct iwm_mvm_statistics_rx_ht_phy { uint32_t plcp_err; uint32_t overrun_err; uint32_t early_overrun_err; uint32_t crc32_good; uint32_t crc32_err; uint32_t mh_format_err; uint32_t agg_crc32_good; uint32_t agg_mpdu_cnt; uint32_t agg_cnt; uint32_t unsupport_mcs; } __packed; /* IWM_STATISTICS_HT_RX_PHY_API_S_VER_1 */ #define IWM_MAX_CHAINS 3 struct iwm_mvm_statistics_tx_non_phy_agg { uint32_t ba_timeout; uint32_t ba_reschedule_frames; uint32_t scd_query_agg_frame_cnt; uint32_t scd_query_no_agg; uint32_t scd_query_agg; uint32_t scd_query_mismatch; uint32_t frame_not_ready; uint32_t underrun; uint32_t bt_prio_kill; uint32_t rx_ba_rsp_cnt; int8_t txpower[IWM_MAX_CHAINS]; int8_t reserved; uint32_t reserved2; } __packed; /* IWM_STATISTICS_TX_NON_PHY_AGG_API_S_VER_1 */ struct iwm_mvm_statistics_tx_channel_width { uint32_t ext_cca_narrow_ch20[1]; uint32_t ext_cca_narrow_ch40[2]; uint32_t ext_cca_narrow_ch80[3]; uint32_t ext_cca_narrow_ch160[4]; uint32_t last_tx_ch_width_indx; uint32_t rx_detected_per_ch_width[4]; uint32_t success_per_ch_width[4]; uint32_t fail_per_ch_width[4]; }; /* IWM_STATISTICS_TX_CHANNEL_WIDTH_API_S_VER_1 */ struct iwm_mvm_statistics_tx { uint32_t preamble_cnt; uint32_t rx_detected_cnt; uint32_t bt_prio_defer_cnt; uint32_t bt_prio_kill_cnt; uint32_t few_bytes_cnt; uint32_t cts_timeout; uint32_t ack_timeout; uint32_t expected_ack_cnt; uint32_t actual_ack_cnt; uint32_t dump_msdu_cnt; uint32_t burst_abort_next_frame_mismatch_cnt; uint32_t burst_abort_missing_next_frame_cnt; uint32_t cts_timeout_collision; uint32_t ack_or_ba_timeout_collision; struct iwm_mvm_statistics_tx_non_phy_agg agg; struct iwm_mvm_statistics_tx_channel_width channel_width; } __packed; /* IWM_STATISTICS_TX_API_S_VER_4 */ struct iwm_mvm_statistics_bt_activity { uint32_t hi_priority_tx_req_cnt; uint32_t hi_priority_tx_denied_cnt; uint32_t lo_priority_tx_req_cnt; uint32_t lo_priority_tx_denied_cnt; uint32_t hi_priority_rx_req_cnt; uint32_t hi_priority_rx_denied_cnt; uint32_t lo_priority_rx_req_cnt; uint32_t lo_priority_rx_denied_cnt; } __packed; /* IWM_STATISTICS_BT_ACTIVITY_API_S_VER_1 */ struct iwm_mvm_statistics_general { struct iwm_mvm_statistics_general_common common; uint32_t beacon_filtered; uint32_t missed_beacons; int8_t beacon_filter_average_energy; int8_t beacon_filter_reason; int8_t beacon_filter_current_energy; int8_t beacon_filter_reserved; uint32_t beacon_filter_delta_time; struct iwm_mvm_statistics_bt_activity bt_activity; } __packed; /* IWM_STATISTICS_GENERAL_API_S_VER_5 */ struct iwm_mvm_statistics_rx { struct iwm_mvm_statistics_rx_phy ofdm; struct iwm_mvm_statistics_rx_phy cck; struct iwm_mvm_statistics_rx_non_phy general; struct iwm_mvm_statistics_rx_ht_phy ofdm_ht; } __packed; /* IWM_STATISTICS_RX_API_S_VER_3 */ /* * IWM_STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) * * By default, uCode issues this notification after receiving a beacon * while associated. To disable this behavior, set DISABLE_NOTIF flag in the * IWM_REPLY_STATISTICS_CMD 0x9c, above. * * Statistics counters continue to increment beacon after beacon, but are * cleared when changing channels or when driver issues IWM_REPLY_STATISTICS_CMD * 0x9c with CLEAR_STATS bit set (see above). * * uCode also issues this notification during scans. uCode clears statistics * appropriately so that each notification contains statistics for only the * one channel that has just been scanned. */ struct iwm_notif_statistics { /* IWM_STATISTICS_NTFY_API_S_VER_8 */ uint32_t flag; struct iwm_mvm_statistics_rx rx; struct iwm_mvm_statistics_tx tx; struct iwm_mvm_statistics_general general; } __packed; /*********************************** * Smart Fifo API ***********************************/ /* Smart Fifo state */ enum iwm_sf_state { IWM_SF_LONG_DELAY_ON = 0, /* should never be called by driver */ IWM_SF_FULL_ON, IWM_SF_UNINIT, IWM_SF_INIT_OFF, IWM_SF_HW_NUM_STATES }; /* Smart Fifo possible scenario */ enum iwm_sf_scenario { IWM_SF_SCENARIO_SINGLE_UNICAST, IWM_SF_SCENARIO_AGG_UNICAST, IWM_SF_SCENARIO_MULTICAST, IWM_SF_SCENARIO_BA_RESP, IWM_SF_SCENARIO_TX_RESP, IWM_SF_NUM_SCENARIO }; #define IWM_SF_TRANSIENT_STATES_NUMBER 2 /* IWM_SF_LONG_DELAY_ON and IWM_SF_FULL_ON */ #define IWM_SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ /* smart FIFO default values */ #define IWM_SF_W_MARK_SISO 4096 #define IWM_SF_W_MARK_MIMO2 8192 #define IWM_SF_W_MARK_MIMO3 6144 #define IWM_SF_W_MARK_LEGACY 4096 #define IWM_SF_W_MARK_SCAN 4096 /* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */ #define IWM_SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ #define IWM_SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ #define IWM_SF_BA_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_BA_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ /** * Smart Fifo configuration command. * @state: smart fifo state, types listed in iwm_sf_sate. * @watermark: Minimum allowed availabe free space in RXF for transient state. * @long_delay_timeouts: aging and idle timer values for each scenario * in long delay state. * @full_on_timeouts: timer values for each scenario in full on state. */ struct iwm_sf_cfg_cmd { enum iwm_sf_state state; uint32_t watermark[IWM_SF_TRANSIENT_STATES_NUMBER]; uint32_t long_delay_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES]; uint32_t full_on_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES]; } __packed; /* IWM_SF_CFG_API_S_VER_2 */ /* * The first MAC indices (starting from 0) * are available to the driver, AUX follows */ #define IWM_MAC_INDEX_AUX 4 #define IWM_MAC_INDEX_MIN_DRIVER 0 #define IWM_NUM_MAC_INDEX_DRIVER IWM_MAC_INDEX_AUX enum iwm_ac { IWM_AC_BK, IWM_AC_BE, IWM_AC_VI, IWM_AC_VO, IWM_AC_NUM, }; /** * enum iwm_mac_protection_flags - MAC context flags * @IWM_MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames, * this will require CCK RTS/CTS2self. * RTS/CTS will protect full burst time. * @IWM_MAC_PROT_FLG_HT_PROT: enable HT protection * @IWM_MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions * @IWM_MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self */ enum iwm_mac_protection_flags { IWM_MAC_PROT_FLG_TGG_PROTECT = (1 << 3), IWM_MAC_PROT_FLG_HT_PROT = (1 << 23), IWM_MAC_PROT_FLG_FAT_PROT = (1 << 24), IWM_MAC_PROT_FLG_SELF_CTS_EN = (1 << 30), }; #define IWM_MAC_FLG_SHORT_SLOT (1 << 4) #define IWM_MAC_FLG_SHORT_PREAMBLE (1 << 5) /** * enum iwm_mac_types - Supported MAC types * @IWM_FW_MAC_TYPE_FIRST: lowest supported MAC type * @IWM_FW_MAC_TYPE_AUX: Auxiliary MAC (internal) * @IWM_FW_MAC_TYPE_LISTENER: monitor MAC type (?) * @IWM_FW_MAC_TYPE_PIBSS: Pseudo-IBSS * @IWM_FW_MAC_TYPE_IBSS: IBSS * @IWM_FW_MAC_TYPE_BSS_STA: BSS (managed) station * @IWM_FW_MAC_TYPE_P2P_DEVICE: P2P Device * @IWM_FW_MAC_TYPE_P2P_STA: P2P client * @IWM_FW_MAC_TYPE_GO: P2P GO * @IWM_FW_MAC_TYPE_TEST: ? * @IWM_FW_MAC_TYPE_MAX: highest support MAC type */ enum iwm_mac_types { IWM_FW_MAC_TYPE_FIRST = 1, IWM_FW_MAC_TYPE_AUX = IWM_FW_MAC_TYPE_FIRST, IWM_FW_MAC_TYPE_LISTENER, IWM_FW_MAC_TYPE_PIBSS, IWM_FW_MAC_TYPE_IBSS, IWM_FW_MAC_TYPE_BSS_STA, IWM_FW_MAC_TYPE_P2P_DEVICE, IWM_FW_MAC_TYPE_P2P_STA, IWM_FW_MAC_TYPE_GO, IWM_FW_MAC_TYPE_TEST, IWM_FW_MAC_TYPE_MAX = IWM_FW_MAC_TYPE_TEST }; /* IWM_MAC_CONTEXT_TYPE_API_E_VER_1 */ /** * enum iwm_tsf_id - TSF hw timer ID * @IWM_TSF_ID_A: use TSF A * @IWM_TSF_ID_B: use TSF B * @IWM_TSF_ID_C: use TSF C * @IWM_TSF_ID_D: use TSF D * @IWM_NUM_TSF_IDS: number of TSF timers available */ enum iwm_tsf_id { IWM_TSF_ID_A = 0, IWM_TSF_ID_B = 1, IWM_TSF_ID_C = 2, IWM_TSF_ID_D = 3, IWM_NUM_TSF_IDS = 4, }; /* IWM_TSF_ID_API_E_VER_1 */ /** * struct iwm_mac_data_ap - configuration data for AP MAC context * @beacon_time: beacon transmit time in system time * @beacon_tsf: beacon transmit time in TSF * @bi: beacon interval in TU * @bi_reciprocal: 2^32 / bi * @dtim_interval: dtim transmit time in TU * @dtim_reciprocal: 2^32 / dtim_interval * @mcast_qid: queue ID for multicast traffic * @beacon_template: beacon template ID */ struct iwm_mac_data_ap { uint32_t beacon_time; uint64_t beacon_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t dtim_interval; uint32_t dtim_reciprocal; uint32_t mcast_qid; uint32_t beacon_template; } __packed; /* AP_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_ibss - configuration data for IBSS MAC context * @beacon_time: beacon transmit time in system time * @beacon_tsf: beacon transmit time in TSF * @bi: beacon interval in TU * @bi_reciprocal: 2^32 / bi * @beacon_template: beacon template ID */ struct iwm_mac_data_ibss { uint32_t beacon_time; uint64_t beacon_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t beacon_template; } __packed; /* IBSS_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_sta - configuration data for station MAC context * @is_assoc: 1 for associated state, 0 otherwise * @dtim_time: DTIM arrival time in system time * @dtim_tsf: DTIM arrival time in TSF * @bi: beacon interval in TU, applicable only when associated * @bi_reciprocal: 2^32 / bi , applicable only when associated * @dtim_interval: DTIM interval in TU, applicable only when associated * @dtim_reciprocal: 2^32 / dtim_interval , applicable only when associated * @listen_interval: in beacon intervals, applicable only when associated * @assoc_id: unique ID assigned by the AP during association */ struct iwm_mac_data_sta { uint32_t is_assoc; uint32_t dtim_time; uint64_t dtim_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t dtim_interval; uint32_t dtim_reciprocal; uint32_t listen_interval; uint32_t assoc_id; uint32_t assoc_beacon_arrive_time; } __packed; /* IWM_STA_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_go - configuration data for P2P GO MAC context * @ap: iwm_mac_data_ap struct with most config data * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. * @opp_ps_enabled: indicate that opportunistic PS allowed */ struct iwm_mac_data_go { struct iwm_mac_data_ap ap; uint32_t ctwin; uint32_t opp_ps_enabled; } __packed; /* GO_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_p2p_sta - configuration data for P2P client MAC context * @sta: iwm_mac_data_sta struct with most config data * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. */ struct iwm_mac_data_p2p_sta { struct iwm_mac_data_sta sta; uint32_t ctwin; } __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_pibss - Pseudo IBSS config data * @stats_interval: interval in TU between statistics notifications to host. */ struct iwm_mac_data_pibss { uint32_t stats_interval; } __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */ /* * struct iwm_mac_data_p2p_dev - configuration data for the P2P Device MAC * context. * @is_disc_extended: if set to true, P2P Device discoverability is enabled on * other channels as well. This should be to true only in case that the * device is discoverable and there is an active GO. Note that setting this * field when not needed, will increase the number of interrupts and have * effect on the platform power, as this setting opens the Rx filters on * all macs. */ struct iwm_mac_data_p2p_dev { uint32_t is_disc_extended; } __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */ /** * enum iwm_mac_filter_flags - MAC context filter flags * @IWM_MAC_FILTER_IN_PROMISC: accept all data frames * @IWM_MAC_FILTER_IN_CONTROL_AND_MGMT: pass all mangement and * control frames to the host * @IWM_MAC_FILTER_ACCEPT_GRP: accept multicast frames * @IWM_MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames * @IWM_MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames * @IWM_MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host * (in station mode when associated) * @IWM_MAC_FILTER_OUT_BCAST: filter out all broadcast frames * @IWM_MAC_FILTER_IN_CRC32: extract FCS and append it to frames * @IWM_MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host */ enum iwm_mac_filter_flags { IWM_MAC_FILTER_IN_PROMISC = (1 << 0), IWM_MAC_FILTER_IN_CONTROL_AND_MGMT = (1 << 1), IWM_MAC_FILTER_ACCEPT_GRP = (1 << 2), IWM_MAC_FILTER_DIS_DECRYPT = (1 << 3), IWM_MAC_FILTER_DIS_GRP_DECRYPT = (1 << 4), IWM_MAC_FILTER_IN_BEACON = (1 << 6), IWM_MAC_FILTER_OUT_BCAST = (1 << 8), IWM_MAC_FILTER_IN_CRC32 = (1 << 11), IWM_MAC_FILTER_IN_PROBE_REQUEST = (1 << 12), }; /** * enum iwm_mac_qos_flags - QoS flags * @IWM_MAC_QOS_FLG_UPDATE_EDCA: ? * @IWM_MAC_QOS_FLG_TGN: HT is enabled * @IWM_MAC_QOS_FLG_TXOP_TYPE: ? * */ enum iwm_mac_qos_flags { IWM_MAC_QOS_FLG_UPDATE_EDCA = (1 << 0), IWM_MAC_QOS_FLG_TGN = (1 << 1), IWM_MAC_QOS_FLG_TXOP_TYPE = (1 << 4), }; /** * struct iwm_ac_qos - QOS timing params for IWM_MAC_CONTEXT_CMD * @cw_min: Contention window, start value in numbers of slots. * Should be a power-of-2, minus 1. Device's default is 0x0f. * @cw_max: Contention window, max value in numbers of slots. * Should be a power-of-2, minus 1. Device's default is 0x3f. * @aifsn: Number of slots in Arbitration Interframe Space (before * performing random backoff timing prior to Tx). Device default 1. * @fifos_mask: FIFOs used by this MAC for this AC * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. * * One instance of this config struct for each of 4 EDCA access categories * in struct iwm_qosparam_cmd. * * Device will automatically increase contention window by (2*CW) + 1 for each * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW * value, to cap the CW value. */ struct iwm_ac_qos { uint16_t cw_min; uint16_t cw_max; uint8_t aifsn; uint8_t fifos_mask; uint16_t edca_txop; } __packed; /* IWM_AC_QOS_API_S_VER_2 */ /** * struct iwm_mac_ctx_cmd - command structure to configure MAC contexts * ( IWM_MAC_CONTEXT_CMD = 0x28 ) * @id_and_color: ID and color of the MAC * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @mac_type: one of IWM_FW_MAC_TYPE_* * @tsd_id: TSF HW timer, one of IWM_TSF_ID_* * @node_addr: MAC address * @bssid_addr: BSSID * @cck_rates: basic rates available for CCK * @ofdm_rates: basic rates available for OFDM * @protection_flags: combination of IWM_MAC_PROT_FLG_FLAG_* * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise * @short_slot: 0x10 for enabling short slots, 0 otherwise * @filter_flags: combination of IWM_MAC_FILTER_* * @qos_flags: from IWM_MAC_QOS_FLG_* * @ac: one iwm_mac_qos configuration for each AC * @mac_specific: one of struct iwm_mac_data_*, according to mac_type */ struct iwm_mac_ctx_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */ uint32_t mac_type; uint32_t tsf_id; uint8_t node_addr[6]; uint16_t reserved_for_node_addr; uint8_t bssid_addr[6]; uint16_t reserved_for_bssid_addr; uint32_t cck_rates; uint32_t ofdm_rates; uint32_t protection_flags; uint32_t cck_short_preamble; uint32_t short_slot; uint32_t filter_flags; /* IWM_MAC_QOS_PARAM_API_S_VER_1 */ uint32_t qos_flags; struct iwm_ac_qos ac[IWM_AC_NUM+1]; /* IWM_MAC_CONTEXT_COMMON_DATA_API_S */ union { struct iwm_mac_data_ap ap; struct iwm_mac_data_go go; struct iwm_mac_data_sta sta; struct iwm_mac_data_p2p_sta p2p_sta; struct iwm_mac_data_p2p_dev p2p_dev; struct iwm_mac_data_pibss pibss; struct iwm_mac_data_ibss ibss; }; } __packed; /* IWM_MAC_CONTEXT_CMD_API_S_VER_1 */ static inline uint32_t iwm_mvm_reciprocal(uint32_t v) { if (!v) return 0; return 0xFFFFFFFF / v; } #define IWM_NONQOS_SEQ_GET 0x1 #define IWM_NONQOS_SEQ_SET 0x2 struct iwm_nonqos_seq_query_cmd { uint32_t get_set_flag; uint32_t mac_id_n_color; uint16_t value; uint16_t reserved; } __packed; /* IWM_NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */ /* Power Management Commands, Responses, Notifications */ /* Radio LP RX Energy Threshold measured in dBm */ #define IWM_POWER_LPRX_RSSI_THRESHOLD 75 #define IWM_POWER_LPRX_RSSI_THRESHOLD_MAX 94 #define IWM_POWER_LPRX_RSSI_THRESHOLD_MIN 30 /** * enum iwm_scan_flags - masks for power table command flags * @IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off * receiver and transmitter. '0' - does not allow. * @IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, * '1' Driver enables PM (use rest of parameters) * @IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, * '1' PM could sleep over DTIM till listen Interval. * @IWM_POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all * access categories are both delivery and trigger enabled. * @IWM_POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and * PBW Snoozing enabled * @IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask * @IWM_POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. * @IWM_POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving * detection enablement */ enum iwm_power_flags { IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK = (1 << 0), IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = (1 << 1), IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK = (1 << 2), IWM_POWER_FLAGS_SNOOZE_ENA_MSK = (1 << 5), IWM_POWER_FLAGS_BT_SCO_ENA = (1 << 8), IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK = (1 << 9), IWM_POWER_FLAGS_LPRX_ENA_MSK = (1 << 11), IWM_POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = (1 << 12), }; #define IWM_POWER_VEC_SIZE 5 /** * struct iwm_powertable_cmd - legacy power command. Beside old API support this * is used also with a new power API for device wide power settings. * IWM_POWER_TABLE_CMD = 0x77 (command, has simple generic response) * * @flags: Power table command flags from IWM_POWER_FLAGS_* * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. * Minimum allowed:- 3 * DTIM. Keep alive period must be * set regardless of power scheme or current power state. * FW use this value also when PM is disabled. * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to * PSM transition - legacy PM * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to * PSM transition - legacy PM * @sleep_interval: not in use * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag * is set. For example, if it is required to skip over * one DTIM, this value need to be set to 2 (DTIM periods). * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm */ struct iwm_powertable_cmd { /* PM_POWER_TABLE_CMD_API_S_VER_6 */ uint16_t flags; uint8_t keep_alive_seconds; uint8_t debug_flags; uint32_t rx_data_timeout; uint32_t tx_data_timeout; uint32_t sleep_interval[IWM_POWER_VEC_SIZE]; uint32_t skip_dtim_periods; uint32_t lprx_rssi_threshold; } __packed; /** * enum iwm_device_power_flags - masks for device power command flags * @DEVIC_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off * receiver and transmitter. '0' - does not allow. This flag should be * always set to '1' unless one need to disable actual power down for debug * purposes. * @IWM_DEVICE_POWER_FLAGS_CAM_MSK: '1' CAM (Continuous Active Mode) is set, meaning * that power management is disabled. '0' Power management is enabled, one * of power schemes is applied. */ enum iwm_device_power_flags { IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = (1 << 0), IWM_DEVICE_POWER_FLAGS_CAM_MSK = (1 << 13), }; /** * struct iwm_device_power_cmd - device wide power command. * IWM_DEVICE_POWER_CMD = 0x77 (command, has simple generic response) * * @flags: Power table command flags from IWM_DEVICE_POWER_FLAGS_* */ struct iwm_device_power_cmd { /* PM_POWER_TABLE_CMD_API_S_VER_6 */ uint16_t flags; uint16_t reserved; } __packed; /** * struct iwm_mac_power_cmd - New power command containing uAPSD support * IWM_MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) * @id_and_color: MAC contex identifier * @flags: Power table command flags from POWER_FLAGS_* * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. * Minimum allowed:- 3 * DTIM. Keep alive period must be * set regardless of power scheme or current power state. * FW use this value also when PM is disabled. * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to * PSM transition - legacy PM * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to * PSM transition - legacy PM * @sleep_interval: not in use * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag * is set. For example, if it is required to skip over * one DTIM, this value need to be set to 2 (DTIM periods). * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to * PSM transition - uAPSD * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to * PSM transition - uAPSD * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set * @snooze_interval: Maximum time between attempts to retrieve buffered data * from the AP [msec] * @snooze_window: A window of time in which PBW snoozing insures that all * packets received. It is also the minimum time from last * received unicast RX packet, before client stops snoozing * for data. [msec] * @snooze_step: TBD * @qndp_tid: TID client shall use for uAPSD QNDP triggers * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for * each corresponding AC. * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct * values. * @heavy_tx_thld_packets: TX threshold measured in number of packets * @heavy_rx_thld_packets: RX threshold measured in number of packets * @heavy_tx_thld_percentage: TX threshold measured in load's percentage * @heavy_rx_thld_percentage: RX threshold measured in load's percentage * @limited_ps_threshold: */ struct iwm_mac_power_cmd { /* CONTEXT_DESC_API_T_VER_1 */ uint32_t id_and_color; /* CLIENT_PM_POWER_TABLE_S_VER_1 */ uint16_t flags; uint16_t keep_alive_seconds; uint32_t rx_data_timeout; uint32_t tx_data_timeout; uint32_t rx_data_timeout_uapsd; uint32_t tx_data_timeout_uapsd; uint8_t lprx_rssi_threshold; uint8_t skip_dtim_periods; uint16_t snooze_interval; uint16_t snooze_window; uint8_t snooze_step; uint8_t qndp_tid; uint8_t uapsd_ac_flags; uint8_t uapsd_max_sp; uint8_t heavy_tx_thld_packets; uint8_t heavy_rx_thld_packets; uint8_t heavy_tx_thld_percentage; uint8_t heavy_rx_thld_percentage; uint8_t limited_ps_threshold; uint8_t reserved; } __packed; /* * struct iwm_uapsd_misbehaving_ap_notif - FW sends this notification when * associated AP is identified as improperly implementing uAPSD protocol. * IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 * @sta_id: index of station in uCode's station table - associated AP ID in * this context. */ struct iwm_uapsd_misbehaving_ap_notif { uint32_t sta_id; uint8_t mac_id; uint8_t reserved[3]; } __packed; /** * struct iwm_beacon_filter_cmd * IWM_REPLY_BEACON_FILTERING_CMD = 0xd2 (command) * @id_and_color: MAC contex identifier * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon * to driver if delta in Energy values calculated for this and last * passed beacon is greater than this threshold. Zero value means that * the Energy change is ignored for beacon filtering, and beacon will * not be forced to be sent to driver regardless of this delta. Typical * energy delta 5dB. * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. * Send beacon to driver if delta in Energy values calculated for this * and last passed beacon is greater than this threshold. Zero value * means that the Energy change is ignored for beacon filtering while in * Roaming state, typical energy delta 1dB. * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values * calculated for current beacon is less than the threshold, use * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature * filtering (Slow or Fast) that is selected (Units are in Celsuis): * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used. * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temerature has been changed. * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temerature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed * for a specific period of time. Units: Beacons. * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed * for a longer period of time then this escape-timeout. Units: Beacons. * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. */ struct iwm_beacon_filter_cmd { uint32_t bf_energy_delta; uint32_t bf_roaming_energy_delta; uint32_t bf_roaming_state; uint32_t bf_temp_threshold; uint32_t bf_temp_fast_filter; uint32_t bf_temp_slow_filter; uint32_t bf_enable_beacon_filter; uint32_t bf_debug_flag; uint32_t bf_escape_timer; uint32_t ba_escape_timer; uint32_t ba_enable_beacon_abort; } __packed; /* Beacon filtering and beacon abort */ #define IWM_BF_ENERGY_DELTA_DEFAULT 5 #define IWM_BF_ENERGY_DELTA_MAX 255 #define IWM_BF_ENERGY_DELTA_MIN 0 #define IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 #define IWM_BF_ROAMING_ENERGY_DELTA_MAX 255 #define IWM_BF_ROAMING_ENERGY_DELTA_MIN 0 #define IWM_BF_ROAMING_STATE_DEFAULT 72 #define IWM_BF_ROAMING_STATE_MAX 255 #define IWM_BF_ROAMING_STATE_MIN 0 #define IWM_BF_TEMP_THRESHOLD_DEFAULT 112 #define IWM_BF_TEMP_THRESHOLD_MAX 255 #define IWM_BF_TEMP_THRESHOLD_MIN 0 #define IWM_BF_TEMP_FAST_FILTER_DEFAULT 1 #define IWM_BF_TEMP_FAST_FILTER_MAX 255 #define IWM_BF_TEMP_FAST_FILTER_MIN 0 #define IWM_BF_TEMP_SLOW_FILTER_DEFAULT 5 #define IWM_BF_TEMP_SLOW_FILTER_MAX 255 #define IWM_BF_TEMP_SLOW_FILTER_MIN 0 #define IWM_BF_ENABLE_BEACON_FILTER_DEFAULT 1 #define IWM_BF_DEBUG_FLAG_DEFAULT 0 #define IWM_BF_ESCAPE_TIMER_DEFAULT 50 #define IWM_BF_ESCAPE_TIMER_MAX 1024 #define IWM_BF_ESCAPE_TIMER_MIN 0 #define IWM_BA_ESCAPE_TIMER_DEFAULT 6 #define IWM_BA_ESCAPE_TIMER_D3 9 #define IWM_BA_ESCAPE_TIMER_MAX 1024 #define IWM_BA_ESCAPE_TIMER_MIN 0 #define IWM_BA_ENABLE_BEACON_ABORT_DEFAULT 1 #define IWM_BF_CMD_CONFIG_DEFAULTS \ .bf_energy_delta = htole32(IWM_BF_ENERGY_DELTA_DEFAULT), \ .bf_roaming_energy_delta = \ htole32(IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT), \ .bf_roaming_state = htole32(IWM_BF_ROAMING_STATE_DEFAULT), \ .bf_temp_threshold = htole32(IWM_BF_TEMP_THRESHOLD_DEFAULT), \ .bf_temp_fast_filter = htole32(IWM_BF_TEMP_FAST_FILTER_DEFAULT), \ .bf_temp_slow_filter = htole32(IWM_BF_TEMP_SLOW_FILTER_DEFAULT), \ .bf_debug_flag = htole32(IWM_BF_DEBUG_FLAG_DEFAULT), \ .bf_escape_timer = htole32(IWM_BF_ESCAPE_TIMER_DEFAULT), \ .ba_escape_timer = htole32(IWM_BA_ESCAPE_TIMER_DEFAULT) /* * These serve as indexes into * struct iwm_rate_info fw_rate_idx_to_plcp[IWM_RATE_COUNT]; * TODO: avoid overlap between legacy and HT rates */ enum { IWM_RATE_1M_INDEX = 0, IWM_FIRST_CCK_RATE = IWM_RATE_1M_INDEX, IWM_RATE_2M_INDEX, IWM_RATE_5M_INDEX, IWM_RATE_11M_INDEX, IWM_LAST_CCK_RATE = IWM_RATE_11M_INDEX, IWM_RATE_6M_INDEX, IWM_FIRST_OFDM_RATE = IWM_RATE_6M_INDEX, IWM_RATE_MCS_0_INDEX = IWM_RATE_6M_INDEX, IWM_FIRST_HT_RATE = IWM_RATE_MCS_0_INDEX, IWM_FIRST_VHT_RATE = IWM_RATE_MCS_0_INDEX, IWM_RATE_9M_INDEX, IWM_RATE_12M_INDEX, IWM_RATE_MCS_1_INDEX = IWM_RATE_12M_INDEX, IWM_RATE_18M_INDEX, IWM_RATE_MCS_2_INDEX = IWM_RATE_18M_INDEX, IWM_RATE_24M_INDEX, IWM_RATE_MCS_3_INDEX = IWM_RATE_24M_INDEX, IWM_RATE_36M_INDEX, IWM_RATE_MCS_4_INDEX = IWM_RATE_36M_INDEX, IWM_RATE_48M_INDEX, IWM_RATE_MCS_5_INDEX = IWM_RATE_48M_INDEX, IWM_RATE_54M_INDEX, IWM_RATE_MCS_6_INDEX = IWM_RATE_54M_INDEX, IWM_LAST_NON_HT_RATE = IWM_RATE_54M_INDEX, IWM_RATE_60M_INDEX, IWM_RATE_MCS_7_INDEX = IWM_RATE_60M_INDEX, IWM_LAST_HT_RATE = IWM_RATE_MCS_7_INDEX, IWM_RATE_MCS_8_INDEX, IWM_RATE_MCS_9_INDEX, IWM_LAST_VHT_RATE = IWM_RATE_MCS_9_INDEX, IWM_RATE_COUNT_LEGACY = IWM_LAST_NON_HT_RATE + 1, IWM_RATE_COUNT = IWM_LAST_VHT_RATE + 1, }; #define IWM_RATE_BIT_MSK(r) (1 << (IWM_RATE_##r##M_INDEX)) /* fw API values for legacy bit rates, both OFDM and CCK */ enum { IWM_RATE_6M_PLCP = 13, IWM_RATE_9M_PLCP = 15, IWM_RATE_12M_PLCP = 5, IWM_RATE_18M_PLCP = 7, IWM_RATE_24M_PLCP = 9, IWM_RATE_36M_PLCP = 11, IWM_RATE_48M_PLCP = 1, IWM_RATE_54M_PLCP = 3, IWM_RATE_1M_PLCP = 10, IWM_RATE_2M_PLCP = 20, IWM_RATE_5M_PLCP = 55, IWM_RATE_11M_PLCP = 110, IWM_RATE_INVM_PLCP = -1, }; /* * rate_n_flags bit fields * * The 32-bit value has different layouts in the low 8 bites depending on the * format. There are three formats, HT, VHT and legacy (11abg, with subformats * for CCK and OFDM). * * High-throughput (HT) rate format * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) * Very High-throughput (VHT) rate format * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) * Legacy OFDM rate format for bits 7:0 * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) * Legacy CCK rate format for bits 7:0: * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) */ /* Bit 8: (1) HT format, (0) legacy or VHT format */ #define IWM_RATE_MCS_HT_POS 8 #define IWM_RATE_MCS_HT_MSK (1 << IWM_RATE_MCS_HT_POS) /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ #define IWM_RATE_MCS_CCK_POS 9 #define IWM_RATE_MCS_CCK_MSK (1 << IWM_RATE_MCS_CCK_POS) /* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ #define IWM_RATE_MCS_VHT_POS 26 #define IWM_RATE_MCS_VHT_MSK (1 << IWM_RATE_MCS_VHT_POS) /* * High-throughput (HT) rate format for bits 7:0 * * 2-0: MCS rate base * 0) 6 Mbps * 1) 12 Mbps * 2) 18 Mbps * 3) 24 Mbps * 4) 36 Mbps * 5) 48 Mbps * 6) 54 Mbps * 7) 60 Mbps * 4-3: 0) Single stream (SISO) * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data * (bits 7-6 are zero) * * Together the low 5 bits work out to the MCS index because we don't * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two * streams and 16-23 have three streams. We could also support MCS 32 * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) */ #define IWM_RATE_HT_MCS_RATE_CODE_MSK 0x7 #define IWM_RATE_HT_MCS_NSS_POS 3 #define IWM_RATE_HT_MCS_NSS_MSK (3 << IWM_RATE_HT_MCS_NSS_POS) /* Bit 10: (1) Use Green Field preamble */ #define IWM_RATE_HT_MCS_GF_POS 10 #define IWM_RATE_HT_MCS_GF_MSK (1 << IWM_RATE_HT_MCS_GF_POS) #define IWM_RATE_HT_MCS_INDEX_MSK 0x3f /* * Very High-throughput (VHT) rate format for bits 7:0 * * 3-0: VHT MCS (0-9) * 5-4: number of streams - 1: * 0) Single stream (SISO) * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) */ /* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ #define IWM_RATE_VHT_MCS_RATE_CODE_MSK 0xf #define IWM_RATE_VHT_MCS_NSS_POS 4 #define IWM_RATE_VHT_MCS_NSS_MSK (3 << IWM_RATE_VHT_MCS_NSS_POS) /* * Legacy OFDM rate format for bits 7:0 * * 3-0: 0xD) 6 Mbps * 0xF) 9 Mbps * 0x5) 12 Mbps * 0x7) 18 Mbps * 0x9) 24 Mbps * 0xB) 36 Mbps * 0x1) 48 Mbps * 0x3) 54 Mbps * (bits 7-4 are 0) * * Legacy CCK rate format for bits 7:0: * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): * * 6-0: 10) 1 Mbps * 20) 2 Mbps * 55) 5.5 Mbps * 110) 11 Mbps * (bit 7 is 0) */ #define IWM_RATE_LEGACY_RATE_MSK 0xff /* * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT */ #define IWM_RATE_MCS_CHAN_WIDTH_POS 11 #define IWM_RATE_MCS_CHAN_WIDTH_MSK (3 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_20 (0 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_40 (1 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_80 (2 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_160 (3 << IWM_RATE_MCS_CHAN_WIDTH_POS) /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ #define IWM_RATE_MCS_SGI_POS 13 #define IWM_RATE_MCS_SGI_MSK (1 << IWM_RATE_MCS_SGI_POS) /* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ #define IWM_RATE_MCS_ANT_POS 14 #define IWM_RATE_MCS_ANT_A_MSK (1 << IWM_RATE_MCS_ANT_POS) #define IWM_RATE_MCS_ANT_B_MSK (2 << IWM_RATE_MCS_ANT_POS) #define IWM_RATE_MCS_ANT_C_MSK (4 << IWM_RATE_MCS_ANT_POS) #define IWM_RATE_MCS_ANT_AB_MSK (IWM_RATE_MCS_ANT_A_MSK | \ IWM_RATE_MCS_ANT_B_MSK) #define IWM_RATE_MCS_ANT_ABC_MSK (IWM_RATE_MCS_ANT_AB_MSK | \ IWM_RATE_MCS_ANT_C_MSK) #define IWM_RATE_MCS_ANT_MSK IWM_RATE_MCS_ANT_ABC_MSK #define IWM_RATE_MCS_ANT_NUM 3 /* Bit 17-18: (0) SS, (1) SS*2 */ #define IWM_RATE_MCS_STBC_POS 17 #define IWM_RATE_MCS_STBC_MSK (1 << IWM_RATE_MCS_STBC_POS) /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ #define IWM_RATE_MCS_BF_POS 19 #define IWM_RATE_MCS_BF_MSK (1 << IWM_RATE_MCS_BF_POS) /* Bit 20: (0) ZLF is off, (1) ZLF is on */ #define IWM_RATE_MCS_ZLF_POS 20 #define IWM_RATE_MCS_ZLF_MSK (1 << IWM_RATE_MCS_ZLF_POS) /* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ #define IWM_RATE_MCS_DUP_POS 24 #define IWM_RATE_MCS_DUP_MSK (3 << IWM_RATE_MCS_DUP_POS) /* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ #define IWM_RATE_MCS_LDPC_POS 27 #define IWM_RATE_MCS_LDPC_MSK (1 << IWM_RATE_MCS_LDPC_POS) /* Link Quality definitions */ /* # entries in rate scale table to support Tx retries */ #define IWM_LQ_MAX_RETRY_NUM 16 /* Link quality command flags bit fields */ /* Bit 0: (0) Don't use RTS (1) Use RTS */ #define IWM_LQ_FLAG_USE_RTS_POS 0 #define IWM_LQ_FLAG_USE_RTS_MSK (1 << IWM_LQ_FLAG_USE_RTS_POS) /* Bit 1-3: LQ command color. Used to match responses to LQ commands */ #define IWM_LQ_FLAG_COLOR_POS 1 #define IWM_LQ_FLAG_COLOR_MSK (7 << IWM_LQ_FLAG_COLOR_POS) /* Bit 4-5: Tx RTS BW Signalling * (0) No RTS BW signalling * (1) Static BW signalling * (2) Dynamic BW signalling */ #define IWM_LQ_FLAG_RTS_BW_SIG_POS 4 #define IWM_LQ_FLAG_RTS_BW_SIG_NONE (0 << IWM_LQ_FLAG_RTS_BW_SIG_POS) #define IWM_LQ_FLAG_RTS_BW_SIG_STATIC (1 << IWM_LQ_FLAG_RTS_BW_SIG_POS) #define IWM_LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << IWM_LQ_FLAG_RTS_BW_SIG_POS) /* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection * Dyanmic BW selection allows Tx with narrower BW then requested in rates */ #define IWM_LQ_FLAG_DYNAMIC_BW_POS 6 #define IWM_LQ_FLAG_DYNAMIC_BW_MSK (1 << IWM_LQ_FLAG_DYNAMIC_BW_POS) /** * struct iwm_lq_cmd - link quality command * @sta_id: station to update * @control: not used * @flags: combination of IWM_LQ_FLAG_* * @mimo_delim: the first SISO index in rs_table, which separates MIMO * and SISO rates * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD). * Should be ANT_[ABC] * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC] * @initial_rate_index: first index from rs_table per AC category * @agg_time_limit: aggregation max time threshold in usec/100, meaning * value of 100 is one usec. Range is 100 to 8000 * @agg_disable_start_th: try-count threshold for starting aggregation. * If a frame has higher try-count, it should not be selected for * starting an aggregation sequence. * @agg_frame_cnt_limit: max frame count in an aggregation. * 0: no limit * 1: no aggregation (one frame per aggregation) * 2 - 0x3f: maximal number of frames (up to 3f == 63) * @rs_table: array of rates for each TX try, each is rate_n_flags, * meaning it is a combination of IWM_RATE_MCS_* and IWM_RATE_*_PLCP * @bf_params: beam forming params, currently not used */ struct iwm_lq_cmd { uint8_t sta_id; uint8_t reserved1; uint16_t control; /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */ uint8_t flags; uint8_t mimo_delim; uint8_t single_stream_ant_msk; uint8_t dual_stream_ant_msk; uint8_t initial_rate_index[IWM_AC_NUM]; /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */ uint16_t agg_time_limit; uint8_t agg_disable_start_th; uint8_t agg_frame_cnt_limit; uint32_t reserved2; uint32_t rs_table[IWM_LQ_MAX_RETRY_NUM]; uint32_t bf_params; }; /* LINK_QUALITY_CMD_API_S_VER_1 */ /** * enum iwm_tx_flags - bitmasks for tx_flags in TX command * @IWM_TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame * @IWM_TX_CMD_FLG_ACK: expect ACK from receiving station * @IWM_TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command. * Otherwise, use rate_n_flags from the TX command * @IWM_TX_CMD_FLG_BA: this frame is a block ack * @IWM_TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected * Must set IWM_TX_CMD_FLG_ACK with this flag. * @IWM_TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection * @IWM_TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence * @IWM_TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence * @IWM_TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC) * @IWM_TX_CMD_FLG_BT_DIS: disable BT priority for this frame * @IWM_TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control. * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command * @IWM_TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU * @IWM_TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame * @IWM_TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame * Should be set for beacons and probe responses * @IWM_TX_CMD_FLG_CALIB: activate PA TX power calibrations * @IWM_TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count * @IWM_TX_CMD_FLG_AGG_START: allow this frame to start aggregation * @IWM_TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header. * Should be set for 26/30 length MAC headers * @IWM_TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW * @IWM_TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration * @IWM_TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation * @IWM_TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id * @IWM_TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped * @IWM_TX_CMD_FLG_EXEC_PAPD: execute PAPD * @IWM_TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power * @IWM_TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk */ enum iwm_tx_flags { IWM_TX_CMD_FLG_PROT_REQUIRE = (1 << 0), IWM_TX_CMD_FLG_ACK = (1 << 3), IWM_TX_CMD_FLG_STA_RATE = (1 << 4), IWM_TX_CMD_FLG_BA = (1 << 5), IWM_TX_CMD_FLG_BAR = (1 << 6), IWM_TX_CMD_FLG_TXOP_PROT = (1 << 7), IWM_TX_CMD_FLG_VHT_NDPA = (1 << 8), IWM_TX_CMD_FLG_HT_NDPA = (1 << 9), IWM_TX_CMD_FLG_CSI_FDBK2HOST = (1 << 10), IWM_TX_CMD_FLG_BT_DIS = (1 << 12), IWM_TX_CMD_FLG_SEQ_CTL = (1 << 13), IWM_TX_CMD_FLG_MORE_FRAG = (1 << 14), IWM_TX_CMD_FLG_NEXT_FRAME = (1 << 15), IWM_TX_CMD_FLG_TSF = (1 << 16), IWM_TX_CMD_FLG_CALIB = (1 << 17), IWM_TX_CMD_FLG_KEEP_SEQ_CTL = (1 << 18), IWM_TX_CMD_FLG_AGG_START = (1 << 19), IWM_TX_CMD_FLG_MH_PAD = (1 << 20), IWM_TX_CMD_FLG_RESP_TO_DRV = (1 << 21), IWM_TX_CMD_FLG_CCMP_AGG = (1 << 22), IWM_TX_CMD_FLG_TKIP_MIC_DONE = (1 << 23), IWM_TX_CMD_FLG_DUR = (1 << 25), IWM_TX_CMD_FLG_FW_DROP = (1 << 26), IWM_TX_CMD_FLG_EXEC_PAPD = (1 << 27), IWM_TX_CMD_FLG_PAPD_TYPE = (1 << 28), IWM_TX_CMD_FLG_HCCA_CHUNK = (1 << 31) }; /* IWM_TX_FLAGS_BITS_API_S_VER_1 */ /* * TX command security control */ #define IWM_TX_CMD_SEC_WEP 0x01 #define IWM_TX_CMD_SEC_CCM 0x02 #define IWM_TX_CMD_SEC_TKIP 0x03 #define IWM_TX_CMD_SEC_EXT 0x04 #define IWM_TX_CMD_SEC_MSK 0x07 #define IWM_TX_CMD_SEC_WEP_KEY_IDX_POS 6 #define IWM_TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0 #define IWM_TX_CMD_SEC_KEY128 0x08 /* TODO: how does these values are OK with only 16 bit variable??? */ /* * TX command next frame info * * bits 0:2 - security control (IWM_TX_CMD_SEC_*) * bit 3 - immediate ACK required * bit 4 - rate is taken from STA table * bit 5 - frame belongs to BA stream * bit 6 - immediate BA response expected * bit 7 - unused * bits 8:15 - Station ID * bits 16:31 - rate */ #define IWM_TX_CMD_NEXT_FRAME_ACK_MSK (0x8) #define IWM_TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10) #define IWM_TX_CMD_NEXT_FRAME_BA_MSK (0x20) #define IWM_TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40) #define IWM_TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8) #define IWM_TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00) #define IWM_TX_CMD_NEXT_FRAME_STA_ID_POS (8) #define IWM_TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000) #define IWM_TX_CMD_NEXT_FRAME_RATE_POS (16) /* * TX command Frame life time in us - to be written in pm_frame_timeout */ #define IWM_TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF #define IWM_TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/ #define IWM_TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */ #define IWM_TX_CMD_LIFE_TIME_EXPIRED_FRAME 0 /* * TID for non QoS frames - to be written in tid_tspec */ #define IWM_TID_NON_QOS IWM_MAX_TID_COUNT /* * Limits on the retransmissions - to be written in {data,rts}_retry_limit */ #define IWM_DEFAULT_TX_RETRY 15 #define IWM_MGMT_DFAULT_RETRY_LIMIT 3 #define IWM_RTS_DFAULT_RETRY_LIMIT 60 #define IWM_BAR_DFAULT_RETRY_LIMIT 60 #define IWM_LOW_RETRY_LIMIT 7 /* TODO: complete documentation for try_cnt and btkill_cnt */ /** * struct iwm_tx_cmd - TX command struct to FW * ( IWM_TX_CMD = 0x1c ) * @len: in bytes of the payload, see below for details * @next_frame_len: same as len, but for next frame (0 if not applicable) * Used for fragmentation and bursting, but not in 11n aggregation. * @tx_flags: combination of IWM_TX_CMD_FLG_* * @rate_n_flags: rate for *all* Tx attempts, if IWM_TX_CMD_FLG_STA_RATE_MSK is * cleared. Combination of IWM_RATE_MCS_* * @sta_id: index of destination station in FW station table * @sec_ctl: security control, IWM_TX_CMD_SEC_* * @initial_rate_index: index into the the rate table for initial TX attempt. * Applied if IWM_TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. * @key: security key * @next_frame_flags: IWM_TX_CMD_SEC_* and IWM_TX_CMD_NEXT_FRAME_* * @life_time: frame life time (usecs??) * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt + * btkill_cnd + reserved), first 32 bits. "0" disables usage. * @dram_msb_ptr: upper bits of the scratch physical address * @rts_retry_limit: max attempts for RTS * @data_retry_limit: max attempts to send the data packet * @tid_spec: TID/tspec * @pm_frame_timeout: PM TX frame timeout * @driver_txop: duration od EDCA TXOP, in 32-usec units. Set this if not * specified by HCCA protocol * * The byte count (both len and next_frame_len) includes MAC header * (24/26/30/32 bytes) * + 2 bytes pad if 26/30 header size * + 8 byte IV for CCM or TKIP (not used for WEP) * + Data payload * + 8-byte MIC (not used for CCM/WEP) * It does not include post-MAC padding, i.e., * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes. * Range of len: 14-2342 bytes. * * After the struct fields the MAC header is placed, plus any padding, * and then the actial payload. */ struct iwm_tx_cmd { uint16_t len; uint16_t next_frame_len; uint32_t tx_flags; struct { uint8_t try_cnt; uint8_t btkill_cnt; uint16_t reserved; } scratch; /* DRAM_SCRATCH_API_U_VER_1 */ uint32_t rate_n_flags; uint8_t sta_id; uint8_t sec_ctl; uint8_t initial_rate_index; uint8_t reserved2; uint8_t key[16]; uint16_t next_frame_flags; uint16_t reserved3; uint32_t life_time; uint32_t dram_lsb_ptr; uint8_t dram_msb_ptr; uint8_t rts_retry_limit; uint8_t data_retry_limit; uint8_t tid_tspec; uint16_t pm_frame_timeout; uint16_t driver_txop; uint8_t payload[0]; struct ieee80211_frame hdr[0]; } __packed; /* IWM_TX_CMD_API_S_VER_3 */ /* * TX response related data */ /* * enum iwm_tx_status - status that is returned by the fw after attempts to Tx * @IWM_TX_STATUS_SUCCESS: * @IWM_TX_STATUS_DIRECT_DONE: * @IWM_TX_STATUS_POSTPONE_DELAY: * @IWM_TX_STATUS_POSTPONE_FEW_BYTES: * @IWM_TX_STATUS_POSTPONE_BT_PRIO: * @IWM_TX_STATUS_POSTPONE_QUIET_PERIOD: * @IWM_TX_STATUS_POSTPONE_CALC_TTAK: * @IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: * @IWM_TX_STATUS_FAIL_SHORT_LIMIT: * @IWM_TX_STATUS_FAIL_LONG_LIMIT: * @IWM_TX_STATUS_FAIL_UNDERRUN: * @IWM_TX_STATUS_FAIL_DRAIN_FLOW: * @IWM_TX_STATUS_FAIL_RFKILL_FLUSH: * @IWM_TX_STATUS_FAIL_LIFE_EXPIRE: * @IWM_TX_STATUS_FAIL_DEST_PS: * @IWM_TX_STATUS_FAIL_HOST_ABORTED: * @IWM_TX_STATUS_FAIL_BT_RETRY: * @IWM_TX_STATUS_FAIL_STA_INVALID: * @IWM_TX_TATUS_FAIL_FRAG_DROPPED: * @IWM_TX_STATUS_FAIL_TID_DISABLE: * @IWM_TX_STATUS_FAIL_FIFO_FLUSHED: * @IWM_TX_STATUS_FAIL_SMALL_CF_POLL: * @IWM_TX_STATUS_FAIL_FW_DROP: * @IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and * STA table * @IWM_TX_FRAME_STATUS_INTERNAL_ABORT: * @IWM_TX_MODE_MSK: * @IWM_TX_MODE_NO_BURST: * @IWM_TX_MODE_IN_BURST_SEQ: * @IWM_TX_MODE_FIRST_IN_BURST: * @IWM_TX_QUEUE_NUM_MSK: * * Valid only if frame_count =1 * TODO: complete documentation */ enum iwm_tx_status { IWM_TX_STATUS_MSK = 0x000000ff, IWM_TX_STATUS_SUCCESS = 0x01, IWM_TX_STATUS_DIRECT_DONE = 0x02, /* postpone TX */ IWM_TX_STATUS_POSTPONE_DELAY = 0x40, IWM_TX_STATUS_POSTPONE_FEW_BYTES = 0x41, IWM_TX_STATUS_POSTPONE_BT_PRIO = 0x42, IWM_TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, IWM_TX_STATUS_POSTPONE_CALC_TTAK = 0x44, /* abort TX */ IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, IWM_TX_STATUS_FAIL_SHORT_LIMIT = 0x82, IWM_TX_STATUS_FAIL_LONG_LIMIT = 0x83, IWM_TX_STATUS_FAIL_UNDERRUN = 0x84, IWM_TX_STATUS_FAIL_DRAIN_FLOW = 0x85, IWM_TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, IWM_TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, IWM_TX_STATUS_FAIL_DEST_PS = 0x88, IWM_TX_STATUS_FAIL_HOST_ABORTED = 0x89, IWM_TX_STATUS_FAIL_BT_RETRY = 0x8a, IWM_TX_STATUS_FAIL_STA_INVALID = 0x8b, IWM_TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, IWM_TX_STATUS_FAIL_TID_DISABLE = 0x8d, IWM_TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, IWM_TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f, IWM_TX_STATUS_FAIL_FW_DROP = 0x90, IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91, IWM_TX_STATUS_INTERNAL_ABORT = 0x92, IWM_TX_MODE_MSK = 0x00000f00, IWM_TX_MODE_NO_BURST = 0x00000000, IWM_TX_MODE_IN_BURST_SEQ = 0x00000100, IWM_TX_MODE_FIRST_IN_BURST = 0x00000200, IWM_TX_QUEUE_NUM_MSK = 0x0001f000, IWM_TX_NARROW_BW_MSK = 0x00060000, IWM_TX_NARROW_BW_1DIV2 = 0x00020000, IWM_TX_NARROW_BW_1DIV4 = 0x00040000, IWM_TX_NARROW_BW_1DIV8 = 0x00060000, }; /* * enum iwm_tx_agg_status - TX aggregation status * @IWM_AGG_TX_STATE_STATUS_MSK: * @IWM_AGG_TX_STATE_TRANSMITTED: * @IWM_AGG_TX_STATE_UNDERRUN: * @IWM_AGG_TX_STATE_BT_PRIO: * @IWM_AGG_TX_STATE_FEW_BYTES: * @IWM_AGG_TX_STATE_ABORT: * @IWM_AGG_TX_STATE_LAST_SENT_TTL: * @IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT: * @IWM_AGG_TX_STATE_LAST_SENT_BT_KILL: * @IWM_AGG_TX_STATE_SCD_QUERY: * @IWM_AGG_TX_STATE_TEST_BAD_CRC32: * @IWM_AGG_TX_STATE_RESPONSE: * @IWM_AGG_TX_STATE_DUMP_TX: * @IWM_AGG_TX_STATE_DELAY_TX: * @IWM_AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries * occur if tx failed for this frame when it was a member of a previous * aggregation block). If rate scaling is used, retry count indicates the * rate table entry used for all frames in the new agg. *@ IWM_AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for * this frame * * TODO: complete documentation */ enum iwm_tx_agg_status { IWM_AGG_TX_STATE_STATUS_MSK = 0x00fff, IWM_AGG_TX_STATE_TRANSMITTED = 0x000, IWM_AGG_TX_STATE_UNDERRUN = 0x001, IWM_AGG_TX_STATE_BT_PRIO = 0x002, IWM_AGG_TX_STATE_FEW_BYTES = 0x004, IWM_AGG_TX_STATE_ABORT = 0x008, IWM_AGG_TX_STATE_LAST_SENT_TTL = 0x010, IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020, IWM_AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040, IWM_AGG_TX_STATE_SCD_QUERY = 0x080, IWM_AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100, IWM_AGG_TX_STATE_RESPONSE = 0x1ff, IWM_AGG_TX_STATE_DUMP_TX = 0x200, IWM_AGG_TX_STATE_DELAY_TX = 0x400, IWM_AGG_TX_STATE_TRY_CNT_POS = 12, IWM_AGG_TX_STATE_TRY_CNT_MSK = 0xf << IWM_AGG_TX_STATE_TRY_CNT_POS, }; #define IWM_AGG_TX_STATE_LAST_SENT_MSK (IWM_AGG_TX_STATE_LAST_SENT_TTL| \ IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT| \ IWM_AGG_TX_STATE_LAST_SENT_BT_KILL) /* * The mask below describes a status where we are absolutely sure that the MPDU * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've * written the bytes to the TXE, but we know nothing about what the DSP did. */ #define IWM_AGG_TX_STAT_FRAME_NOT_SENT (IWM_AGG_TX_STATE_FEW_BYTES | \ IWM_AGG_TX_STATE_ABORT | \ IWM_AGG_TX_STATE_SCD_QUERY) /* * IWM_REPLY_TX = 0x1c (response) * * This response may be in one of two slightly different formats, indicated * by the frame_count field: * * 1) No aggregation (frame_count == 1). This reports Tx results for a single * frame. Multiple attempts, at various bit rates, may have been made for * this frame. * * 2) Aggregation (frame_count > 1). This reports Tx results for two or more * frames that used block-acknowledge. All frames were transmitted at * same rate. Rate scaling may have been used if first frame in this new * agg block failed in previous agg block(s). * * Note that, for aggregation, ACK (block-ack) status is not delivered * here; block-ack has not been received by the time the device records * this status. * This status relates to reasons the tx might have been blocked or aborted * within the device, rather than whether it was received successfully by * the destination station. */ /** * struct iwm_agg_tx_status - per packet TX aggregation status * @status: enum iwm_tx_agg_status * @sequence: Sequence # for this frame's Tx cmd (not SSN!) */ struct iwm_agg_tx_status { uint16_t status; uint16_t sequence; } __packed; /* * definitions for initial rate index field * bits [3:0] initial rate index * bits [6:4] rate table color, used for the initial rate * bit-7 invalid rate indication */ #define IWM_TX_RES_INIT_RATE_INDEX_MSK 0x0f #define IWM_TX_RES_RATE_TABLE_COLOR_MSK 0x70 #define IWM_TX_RES_INV_RATE_INDEX_MSK 0x80 #define IWM_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) #define IWM_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) /** * struct iwm_mvm_tx_resp - notifies that fw is TXing a packet * ( IWM_REPLY_TX = 0x1c ) * @frame_count: 1 no aggregation, >1 aggregation * @bt_kill_count: num of times blocked by bluetooth (unused for agg) * @failure_rts: num of failures due to unsuccessful RTS * @failure_frame: num failures due to no ACK (unused for agg) * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the * Tx of all the batch. IWM_RATE_MCS_* * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. * for agg: RTS + CTS + aggregation tx time + block-ack time. * in usec. * @pa_status: tx power info * @pa_integ_res_a: tx power info * @pa_integ_res_b: tx power info * @pa_integ_res_c: tx power info * @measurement_req_id: tx power info * @tfd_info: TFD information set by the FH * @seq_ctl: sequence control from the Tx cmd * @byte_cnt: byte count from the Tx cmd * @tlc_info: TLC rate info * @ra_tid: bits [3:0] = ra, bits [7:4] = tid * @frame_ctrl: frame control * @status: for non-agg: frame status IWM_TX_STATUS_* * for agg: status of 1st frame, IWM_AGG_TX_STATE_*; other frame status fields * follow this one, up to frame_count. * * After the array of statuses comes the SSN of the SCD. Look at * %iwm_mvm_get_scd_ssn for more details. */ struct iwm_mvm_tx_resp { uint8_t frame_count; uint8_t bt_kill_count; uint8_t failure_rts; uint8_t failure_frame; uint32_t initial_rate; uint16_t wireless_media_time; uint8_t pa_status; uint8_t pa_integ_res_a[3]; uint8_t pa_integ_res_b[3]; uint8_t pa_integ_res_c[3]; uint16_t measurement_req_id; uint16_t reserved; uint32_t tfd_info; uint16_t seq_ctl; uint16_t byte_cnt; uint8_t tlc_info; uint8_t ra_tid; uint16_t frame_ctrl; struct iwm_agg_tx_status status; } __packed; /* IWM_TX_RSP_API_S_VER_3 */ /** * struct iwm_mvm_ba_notif - notifies about reception of BA * ( IWM_BA_NOTIF = 0xc5 ) * @sta_addr_lo32: lower 32 bits of the MAC address * @sta_addr_hi16: upper 16 bits of the MAC address * @sta_id: Index of recipient (BA-sending) station in fw's station table * @tid: tid of the session * @seq_ctl: * @bitmap: the bitmap of the BA notification as seen in the air * @scd_flow: the tx queue this BA relates to * @scd_ssn: the index of the last contiguously sent packet * @txed: number of Txed frames in this batch * @txed_2_done: number of Acked frames in this batch */ struct iwm_mvm_ba_notif { uint32_t sta_addr_lo32; uint16_t sta_addr_hi16; uint16_t reserved; uint8_t sta_id; uint8_t tid; uint16_t seq_ctl; uint64_t bitmap; uint16_t scd_flow; uint16_t scd_ssn; uint8_t txed; uint8_t txed_2_done; uint16_t reserved1; } __packed; /* * struct iwm_mac_beacon_cmd - beacon template command * @tx: the tx commands associated with the beacon frame * @template_id: currently equal to the mac context id of the coresponding * mac. * @tim_idx: the offset of the tim IE in the beacon * @tim_size: the length of the tim IE * @frame: the template of the beacon frame */ struct iwm_mac_beacon_cmd { struct iwm_tx_cmd tx; uint32_t template_id; uint32_t tim_idx; uint32_t tim_size; struct ieee80211_frame frame[0]; } __packed; struct iwm_beacon_notif { struct iwm_mvm_tx_resp beacon_notify_hdr; uint64_t tsf; uint32_t ibss_mgr_status; } __packed; /** * enum iwm_dump_control - dump (flush) control flags * @IWM_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty * and the TFD queues are empty. */ enum iwm_dump_control { IWM_DUMP_TX_FIFO_FLUSH = (1 << 1), }; /** * struct iwm_tx_path_flush_cmd -- queue/FIFO flush command * @queues_ctl: bitmap of queues to flush * @flush_ctl: control flags * @reserved: reserved */ struct iwm_tx_path_flush_cmd { uint32_t queues_ctl; uint16_t flush_ctl; uint16_t reserved; } __packed; /* IWM_TX_PATH_FLUSH_CMD_API_S_VER_1 */ /** * iwm_mvm_get_scd_ssn - returns the SSN of the SCD * @tx_resp: the Tx response from the fw (agg or non-agg) * * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since * it can't know that everything will go well until the end of the AMPDU, it * can't know in advance the number of MPDUs that will be sent in the current * batch. This is why it writes the agg Tx response while it fetches the MPDUs. * Hence, it can't know in advance what the SSN of the SCD will be at the end * of the batch. This is why the SSN of the SCD is written at the end of the * whole struct at a variable offset. This function knows how to cope with the * variable offset and returns the SSN of the SCD. */ static inline uint32_t iwm_mvm_get_scd_ssn(struct iwm_mvm_tx_resp *tx_resp) { return le32_to_cpup((uint32_t *)&tx_resp->status + tx_resp->frame_count) & 0xfff; } /* Scan Commands, Responses, Notifications */ /* Masks for iwm_scan_channel.type flags */ #define IWM_SCAN_CHANNEL_TYPE_ACTIVE (1 << 0) #define IWM_SCAN_CHANNEL_NARROW_BAND (1 << 22) /* Max number of IEs for direct SSID scans in a command */ #define IWM_PROBE_OPTION_MAX 20 /** * struct iwm_scan_channel - entry in IWM_REPLY_SCAN_CMD channel table * @channel: band is selected by iwm_scan_cmd "flags" field * @tx_gain: gain for analog radio * @dsp_atten: gain for DSP * @active_dwell: dwell time for active scan in TU, typically 5-50 * @passive_dwell: dwell time for passive scan in TU, typically 20-500 * @type: type is broken down to these bits: * bit 0: 0 = passive, 1 = active * bits 1-20: SSID direct bit map. If any of these bits is set then * the corresponding SSID IE is transmitted in probe request * (bit i adds IE in position i to the probe request) * bit 22: channel width, 0 = regular, 1 = TGj narrow channel * * @iteration_count: * @iteration_interval: * This struct is used once for each channel in the scan list. * Each channel can independently select: * 1) SSID for directed active scans * 2) Txpower setting (for rate specified within Tx command) * 3) How long to stay on-channel (behavior may be modified by quiet_time, * quiet_plcp_th, good_CRC_th) * * To avoid uCode errors, make sure the following are true (see comments * under struct iwm_scan_cmd about max_out_time and quiet_time): * 1) If using passive_dwell (i.e. passive_dwell != 0): * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) * 2) quiet_time <= active_dwell * 3) If restricting off-channel time (i.e. max_out_time !=0): * passive_dwell < max_out_time * active_dwell < max_out_time */ struct iwm_scan_channel { uint32_t type; uint16_t channel; uint16_t iteration_count; uint32_t iteration_interval; uint16_t active_dwell; uint16_t passive_dwell; } __packed; /* IWM_SCAN_CHANNEL_CONTROL_API_S_VER_1 */ /** * struct iwm_ssid_ie - directed scan network information element * * Up to 20 of these may appear in IWM_REPLY_SCAN_CMD, * selected by "type" bit field in struct iwm_scan_channel; * each channel may select different ssids from among the 20 entries. * SSID IEs get transmitted in reverse order of entry. */ struct iwm_ssid_ie { uint8_t id; uint8_t len; uint8_t ssid[IEEE80211_NWID_LEN]; } __packed; /* IWM_SCAN_DIRECT_SSID_IE_API_S_VER_1 */ /** * iwm_scan_flags - masks for scan command flags *@IWM_SCAN_FLAGS_PERIODIC_SCAN: *@IWM_SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX: *@IWM_SCAN_FLAGS_DELAYED_SCAN_LOWBAND: *@IWM_SCAN_FLAGS_DELAYED_SCAN_HIGHBAND: *@IWM_SCAN_FLAGS_FRAGMENTED_SCAN: *@IWM_SCAN_FLAGS_PASSIVE2ACTIVE: use active scan on channels that was active * in the past hour, even if they are marked as passive. */ enum iwm_scan_flags { IWM_SCAN_FLAGS_PERIODIC_SCAN = (1 << 0), IWM_SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX = (1 << 1), IWM_SCAN_FLAGS_DELAYED_SCAN_LOWBAND = (1 << 2), IWM_SCAN_FLAGS_DELAYED_SCAN_HIGHBAND = (1 << 3), IWM_SCAN_FLAGS_FRAGMENTED_SCAN = (1 << 4), IWM_SCAN_FLAGS_PASSIVE2ACTIVE = (1 << 5), }; /** * enum iwm_scan_type - Scan types for scan command * @IWM_SCAN_TYPE_FORCED: * @IWM_SCAN_TYPE_BACKGROUND: * @IWM_SCAN_TYPE_OS: * @IWM_SCAN_TYPE_ROAMING: * @IWM_SCAN_TYPE_ACTION: * @IWM_SCAN_TYPE_DISCOVERY: * @IWM_SCAN_TYPE_DISCOVERY_FORCED: */ enum iwm_scan_type { IWM_SCAN_TYPE_FORCED = 0, IWM_SCAN_TYPE_BACKGROUND = 1, IWM_SCAN_TYPE_OS = 2, IWM_SCAN_TYPE_ROAMING = 3, IWM_SCAN_TYPE_ACTION = 4, IWM_SCAN_TYPE_DISCOVERY = 5, IWM_SCAN_TYPE_DISCOVERY_FORCED = 6, }; /* IWM_SCAN_ACTIVITY_TYPE_E_VER_1 */ /* Maximal number of channels to scan */ #define IWM_MAX_NUM_SCAN_CHANNELS 0x24 /** * struct iwm_scan_cmd - scan request command * ( IWM_SCAN_REQUEST_CMD = 0x80 ) * @len: command length in bytes * @scan_flags: scan flags from IWM_SCAN_FLAGS_* * @channel_count: num of channels in channel list (1 - IWM_MAX_NUM_SCAN_CHANNELS) * @quiet_time: in msecs, dwell this time for active scan on quiet channels * @quiet_plcp_th: quiet PLCP threshold (channel is quiet if less than * this number of packets were received (typically 1) * @passive2active: is auto switching from passive to active during scan allowed * @rxchain_sel_flags: RXON_RX_CHAIN_* * @max_out_time: in usecs, max out of serving channel time * @suspend_time: how long to pause scan when returning to service channel: * bits 0-19: beacon interal in usecs (suspend before executing) * bits 20-23: reserved * bits 24-31: number of beacons (suspend between channels) * @rxon_flags: RXON_FLG_* * @filter_flags: RXON_FILTER_* * @tx_cmd: for active scans (zero for passive), w/o payload, * no RS so specify TX rate * @direct_scan: direct scan SSIDs * @type: one of IWM_SCAN_TYPE_* * @repeats: how many time to repeat the scan */ struct iwm_scan_cmd { uint16_t len; uint8_t scan_flags; uint8_t channel_count; uint16_t quiet_time; uint16_t quiet_plcp_th; uint16_t passive2active; uint16_t rxchain_sel_flags; uint32_t max_out_time; uint32_t suspend_time; /* IWM_RX_ON_FLAGS_API_S_VER_1 */ uint32_t rxon_flags; uint32_t filter_flags; struct iwm_tx_cmd tx_cmd; struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX]; uint32_t type; uint32_t repeats; /* * Probe request frame, followed by channel list. * * Size of probe request frame is specified by byte count in tx_cmd. * Channel list follows immediately after probe request frame. * Number of channels in list is specified by channel_count. * Each channel in list is of type: * * struct iwm_scan_channel channels[0]; * * NOTE: Only one band of channels can be scanned per pass. You * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait * for one scan to complete (i.e. receive IWM_SCAN_COMPLETE_NOTIFICATION) * before requesting another scan. */ uint8_t data[0]; } __packed; /* IWM_SCAN_REQUEST_FIXED_PART_API_S_VER_5 */ /* Response to scan request contains only status with one of these values */ #define IWM_SCAN_RESPONSE_OK 0x1 #define IWM_SCAN_RESPONSE_ERROR 0x2 /* * IWM_SCAN_ABORT_CMD = 0x81 * When scan abort is requested, the command has no fields except the common * header. The response contains only a status with one of these values. */ #define IWM_SCAN_ABORT_POSSIBLE 0x1 #define IWM_SCAN_ABORT_IGNORED 0x2 /* no pending scans */ /* TODO: complete documentation */ #define IWM_SCAN_OWNER_STATUS 0x1 #define IWM_MEASURE_OWNER_STATUS 0x2 /** * struct iwm_scan_start_notif - notifies start of scan in the device * ( IWM_SCAN_START_NOTIFICATION = 0x82 ) * @tsf_low: TSF timer (lower half) in usecs * @tsf_high: TSF timer (higher half) in usecs * @beacon_timer: structured as follows: * bits 0:19 - beacon interval in usecs * bits 20:23 - reserved (0) * bits 24:31 - number of beacons * @channel: which channel is scanned * @band: 0 for 5.2 GHz, 1 for 2.4 GHz * @status: one of *_OWNER_STATUS */ struct iwm_scan_start_notif { uint32_t tsf_low; uint32_t tsf_high; uint32_t beacon_timer; uint8_t channel; uint8_t band; uint8_t reserved[2]; uint32_t status; } __packed; /* IWM_SCAN_START_NTF_API_S_VER_1 */ /* scan results probe_status first bit indicates success */ #define IWM_SCAN_PROBE_STATUS_OK 0 #define IWM_SCAN_PROBE_STATUS_TX_FAILED (1 << 0) /* error statuses combined with TX_FAILED */ #define IWM_SCAN_PROBE_STATUS_FAIL_TTL (1 << 1) #define IWM_SCAN_PROBE_STATUS_FAIL_BT (1 << 2) /* How many statistics are gathered for each channel */ #define IWM_SCAN_RESULTS_STATISTICS 1 /** * enum iwm_scan_complete_status - status codes for scan complete notifications * @IWM_SCAN_COMP_STATUS_OK: scan completed successfully * @IWM_SCAN_COMP_STATUS_ABORT: scan was aborted by user * @IWM_SCAN_COMP_STATUS_ERR_SLEEP: sending null sleep packet failed * @IWM_SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT: timeout before channel is ready * @IWM_SCAN_COMP_STATUS_ERR_PROBE: sending probe request failed * @IWM_SCAN_COMP_STATUS_ERR_WAKEUP: sending null wakeup packet failed * @IWM_SCAN_COMP_STATUS_ERR_ANTENNAS: invalid antennas chosen at scan command * @IWM_SCAN_COMP_STATUS_ERR_INTERNAL: internal error caused scan abort * @IWM_SCAN_COMP_STATUS_ERR_COEX: medium was lost ot WiMax * @IWM_SCAN_COMP_STATUS_P2P_ACTION_OK: P2P public action frame TX was successful * (not an error!) * @IWM_SCAN_COMP_STATUS_ITERATION_END: indicates end of one repeatition the driver * asked for * @IWM_SCAN_COMP_STATUS_ERR_ALLOC_TE: scan could not allocate time events */ enum iwm_scan_complete_status { IWM_SCAN_COMP_STATUS_OK = 0x1, IWM_SCAN_COMP_STATUS_ABORT = 0x2, IWM_SCAN_COMP_STATUS_ERR_SLEEP = 0x3, IWM_SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT = 0x4, IWM_SCAN_COMP_STATUS_ERR_PROBE = 0x5, IWM_SCAN_COMP_STATUS_ERR_WAKEUP = 0x6, IWM_SCAN_COMP_STATUS_ERR_ANTENNAS = 0x7, IWM_SCAN_COMP_STATUS_ERR_INTERNAL = 0x8, IWM_SCAN_COMP_STATUS_ERR_COEX = 0x9, IWM_SCAN_COMP_STATUS_P2P_ACTION_OK = 0xA, IWM_SCAN_COMP_STATUS_ITERATION_END = 0x0B, IWM_SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, }; /** * struct iwm_scan_results_notif - scan results for one channel * ( IWM_SCAN_RESULTS_NOTIFICATION = 0x83 ) * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz * @probe_status: IWM_SCAN_PROBE_STATUS_*, indicates success of probe request * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs * @statistics: statistics gathered for this channel */ struct iwm_scan_results_notif { uint8_t channel; uint8_t band; uint8_t probe_status; uint8_t num_probe_not_sent; uint32_t duration; uint32_t statistics[IWM_SCAN_RESULTS_STATISTICS]; } __packed; /* IWM_SCAN_RESULT_NTF_API_S_VER_2 */ /** * struct iwm_scan_complete_notif - notifies end of scanning (all channels) * ( IWM_SCAN_COMPLETE_NOTIFICATION = 0x84 ) * @scanned_channels: number of channels scanned (and number of valid results) * @status: one of IWM_SCAN_COMP_STATUS_* * @bt_status: BT on/off status * @last_channel: last channel that was scanned * @tsf_low: TSF timer (lower half) in usecs * @tsf_high: TSF timer (higher half) in usecs * @results: all scan results, only "scanned_channels" of them are valid */ struct iwm_scan_complete_notif { uint8_t scanned_channels; uint8_t status; uint8_t bt_status; uint8_t last_channel; uint32_t tsf_low; uint32_t tsf_high; struct iwm_scan_results_notif results[IWM_MAX_NUM_SCAN_CHANNELS]; } __packed; /* IWM_SCAN_COMPLETE_NTF_API_S_VER_2 */ /* scan offload */ #define IWM_MAX_SCAN_CHANNELS 40 #define IWM_SCAN_MAX_BLACKLIST_LEN 64 #define IWM_SCAN_SHORT_BLACKLIST_LEN 16 #define IWM_SCAN_MAX_PROFILES 11 #define IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE 512 /* Default watchdog (in MS) for scheduled scan iteration */ #define IWM_SCHED_SCAN_WATCHDOG cpu_to_le16(15000) #define IWM_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) #define IWM_CAN_ABORT_STATUS 1 #define IWM_FULL_SCAN_MULTIPLIER 5 #define IWM_FAST_SCHED_SCAN_ITERATIONS 3 enum iwm_scan_framework_client { IWM_SCAN_CLIENT_SCHED_SCAN = (1 << 0), IWM_SCAN_CLIENT_NETDETECT = (1 << 1), IWM_SCAN_CLIENT_ASSET_TRACKING = (1 << 2), }; /** * struct iwm_scan_offload_cmd - IWM_SCAN_REQUEST_FIXED_PART_API_S_VER_6 * @scan_flags: see enum iwm_scan_flags * @channel_count: channels in channel list * @quiet_time: dwell time, in milisiconds, on quiet channel * @quiet_plcp_th: quiet channel num of packets threshold * @good_CRC_th: passive to active promotion threshold * @rx_chain: RXON rx chain. * @max_out_time: max uSec to be out of assoceated channel * @suspend_time: pause scan this long when returning to service channel * @flags: RXON flags * @filter_flags: RXONfilter * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz. * @direct_scan: list of SSIDs for directed active scan * @scan_type: see enum iwm_scan_type. * @rep_count: repetition count for each scheduled scan iteration. */ struct iwm_scan_offload_cmd { uint16_t len; uint8_t scan_flags; uint8_t channel_count; uint16_t quiet_time; uint16_t quiet_plcp_th; uint16_t good_CRC_th; uint16_t rx_chain; uint32_t max_out_time; uint32_t suspend_time; /* IWM_RX_ON_FLAGS_API_S_VER_1 */ uint32_t flags; uint32_t filter_flags; struct iwm_tx_cmd tx_cmd[2]; /* IWM_SCAN_DIRECT_SSID_IE_API_S_VER_1 */ struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX]; uint32_t scan_type; uint32_t rep_count; } __packed; enum iwm_scan_offload_channel_flags { IWM_SCAN_OFFLOAD_CHANNEL_ACTIVE = (1 << 0), IWM_SCAN_OFFLOAD_CHANNEL_NARROW = (1 << 22), IWM_SCAN_OFFLOAD_CHANNEL_FULL = (1 << 24), IWM_SCAN_OFFLOAD_CHANNEL_PARTIAL = (1 << 25), }; /** * iwm_scan_channel_cfg - IWM_SCAN_CHANNEL_CFG_S * @type: bitmap - see enum iwm_scan_offload_channel_flags. * 0: passive (0) or active (1) scan. * 1-20: directed scan to i'th ssid. * 22: channel width configuation - 1 for narrow. * 24: full scan. * 25: partial scan. * @channel_number: channel number 1-13 etc. * @iter_count: repetition count for the channel. * @iter_interval: interval between two innteration on one channel. * @dwell_time: entry 0 - active scan, entry 1 - passive scan. */ struct iwm_scan_channel_cfg { uint32_t type[IWM_MAX_SCAN_CHANNELS]; uint16_t channel_number[IWM_MAX_SCAN_CHANNELS]; uint16_t iter_count[IWM_MAX_SCAN_CHANNELS]; uint32_t iter_interval[IWM_MAX_SCAN_CHANNELS]; uint8_t dwell_time[IWM_MAX_SCAN_CHANNELS][2]; } __packed; /** * iwm_scan_offload_cfg - IWM_SCAN_OFFLOAD_CONFIG_API_S * @scan_cmd: scan command fixed part * @channel_cfg: scan channel configuration * @data: probe request frames (one per band) */ struct iwm_scan_offload_cfg { struct iwm_scan_offload_cmd scan_cmd; struct iwm_scan_channel_cfg channel_cfg; uint8_t data[0]; } __packed; /** * iwm_scan_offload_blacklist - IWM_SCAN_OFFLOAD_BLACKLIST_S * @ssid: MAC address to filter out * @reported_rssi: AP rssi reported to the host * @client_bitmap: clients ignore this entry - enum scan_framework_client */ struct iwm_scan_offload_blacklist { uint8_t ssid[ETHER_ADDR_LEN]; uint8_t reported_rssi; uint8_t client_bitmap; } __packed; enum iwm_scan_offload_network_type { IWM_NETWORK_TYPE_BSS = 1, IWM_NETWORK_TYPE_IBSS = 2, IWM_NETWORK_TYPE_ANY = 3, }; enum iwm_scan_offload_band_selection { IWM_SCAN_OFFLOAD_SELECT_2_4 = 0x4, IWM_SCAN_OFFLOAD_SELECT_5_2 = 0x8, IWM_SCAN_OFFLOAD_SELECT_ANY = 0xc, }; /** * iwm_scan_offload_profile - IWM_SCAN_OFFLOAD_PROFILE_S * @ssid_index: index to ssid list in fixed part * @unicast_cipher: encryption olgorithm to match - bitmap * @aut_alg: authentication olgorithm to match - bitmap * @network_type: enum iwm_scan_offload_network_type * @band_selection: enum iwm_scan_offload_band_selection * @client_bitmap: clients waiting for match - enum scan_framework_client */ struct iwm_scan_offload_profile { uint8_t ssid_index; uint8_t unicast_cipher; uint8_t auth_alg; uint8_t network_type; uint8_t band_selection; uint8_t client_bitmap; uint8_t reserved[2]; } __packed; /** * iwm_scan_offload_profile_cfg - IWM_SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 * @blaclist: AP list to filter off from scan results * @profiles: profiles to search for match * @blacklist_len: length of blacklist * @num_profiles: num of profiles in the list * @match_notify: clients waiting for match found notification * @pass_match: clients waiting for the results * @active_clients: active clients bitmap - enum scan_framework_client * @any_beacon_notify: clients waiting for match notification without match */ struct iwm_scan_offload_profile_cfg { struct iwm_scan_offload_profile profiles[IWM_SCAN_MAX_PROFILES]; uint8_t blacklist_len; uint8_t num_profiles; uint8_t match_notify; uint8_t pass_match; uint8_t active_clients; uint8_t any_beacon_notify; uint8_t reserved[2]; } __packed; /** * iwm_scan_offload_schedule - schedule of scan offload * @delay: delay between iterations, in seconds. * @iterations: num of scan iterations * @full_scan_mul: number of partial scans before each full scan */ struct iwm_scan_offload_schedule { uint16_t delay; uint8_t iterations; uint8_t full_scan_mul; } __packed; /* * iwm_scan_offload_flags * * IWM_SCAN_OFFLOAD_FLAG_PASS_ALL: pass all results - no filtering. * IWM_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL: add cached channels to partial scan. * IWM_SCAN_OFFLOAD_FLAG_ENERGY_SCAN: use energy based scan before partial scan * on A band. */ enum iwm_scan_offload_flags { IWM_SCAN_OFFLOAD_FLAG_PASS_ALL = (1 << 0), IWM_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL = (1 << 2), IWM_SCAN_OFFLOAD_FLAG_ENERGY_SCAN = (1 << 3), }; /** * iwm_scan_offload_req - scan offload request command * @flags: bitmap - enum iwm_scan_offload_flags. * @watchdog: maximum scan duration in TU. * @delay: delay in seconds before first iteration. * @schedule_line: scan offload schedule, for fast and regular scan. */ struct iwm_scan_offload_req { uint16_t flags; uint16_t watchdog; uint16_t delay; uint16_t reserved; struct iwm_scan_offload_schedule schedule_line[2]; } __packed; enum iwm_scan_offload_compleate_status { IWM_SCAN_OFFLOAD_COMPLETED = 1, IWM_SCAN_OFFLOAD_ABORTED = 2, }; /** * iwm_scan_offload_complete - IWM_SCAN_OFFLOAD_COMPLETE_NTF_API_S_VER_1 * @last_schedule_line: last schedule line executed (fast or regular) * @last_schedule_iteration: last scan iteration executed before scan abort * @status: enum iwm_scan_offload_compleate_status */ struct iwm_scan_offload_complete { uint8_t last_schedule_line; uint8_t last_schedule_iteration; uint8_t status; uint8_t reserved; } __packed; /** * iwm_sched_scan_results - IWM_SCAN_OFFLOAD_MATCH_FOUND_NTF_API_S_VER_1 * @ssid_bitmap: SSIDs indexes found in this iteration * @client_bitmap: clients that are active and wait for this notification */ struct iwm_sched_scan_results { uint16_t ssid_bitmap; uint8_t client_bitmap; uint8_t reserved; }; /** * enum iwm_sta_flags - flags for the ADD_STA host command * @IWM_STA_FLG_REDUCED_TX_PWR_CTRL: * @IWM_STA_FLG_REDUCED_TX_PWR_DATA: * @IWM_STA_FLG_FLG_ANT_MSK: Antenna selection * @IWM_STA_FLG_PS: set if STA is in Power Save * @IWM_STA_FLG_INVALID: set if STA is invalid * @IWM_STA_FLG_DLP_EN: Direct Link Protocol is enabled * @IWM_STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs * @IWM_STA_FLG_DRAIN_FLOW: drain flow * @IWM_STA_FLG_PAN: STA is for PAN interface * @IWM_STA_FLG_CLASS_AUTH: * @IWM_STA_FLG_CLASS_ASSOC: * @IWM_STA_FLG_CLASS_MIMO_PROT: * @IWM_STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU * @IWM_STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation * @IWM_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is * initialised by driver and can be updated by fw upon reception of * action frames that can change the channel width. When cleared the fw * will send all the frames in 20MHz even when FAT channel is requested. * @IWM_STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the * driver and can be updated by fw upon reception of action frames. * @IWM_STA_FLG_MFP_EN: Management Frame Protection */ enum iwm_sta_flags { IWM_STA_FLG_REDUCED_TX_PWR_CTRL = (1 << 3), IWM_STA_FLG_REDUCED_TX_PWR_DATA = (1 << 6), IWM_STA_FLG_FLG_ANT_A = (1 << 4), IWM_STA_FLG_FLG_ANT_B = (2 << 4), IWM_STA_FLG_FLG_ANT_MSK = (IWM_STA_FLG_FLG_ANT_A | IWM_STA_FLG_FLG_ANT_B), IWM_STA_FLG_PS = (1 << 8), IWM_STA_FLG_DRAIN_FLOW = (1 << 12), IWM_STA_FLG_PAN = (1 << 13), IWM_STA_FLG_CLASS_AUTH = (1 << 14), IWM_STA_FLG_CLASS_ASSOC = (1 << 15), IWM_STA_FLG_RTS_MIMO_PROT = (1 << 17), IWM_STA_FLG_MAX_AGG_SIZE_SHIFT = 19, IWM_STA_FLG_MAX_AGG_SIZE_8K = (0 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_16K = (1 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_32K = (2 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_64K = (3 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_128K = (4 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_256K = (5 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_512K = (6 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_1024K = (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_MAX_AGG_SIZE_MSK = (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT), IWM_STA_FLG_AGG_MPDU_DENS_SHIFT = 23, IWM_STA_FLG_AGG_MPDU_DENS_2US = (4 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT), IWM_STA_FLG_AGG_MPDU_DENS_4US = (5 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT), IWM_STA_FLG_AGG_MPDU_DENS_8US = (6 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT), IWM_STA_FLG_AGG_MPDU_DENS_16US = (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT), IWM_STA_FLG_AGG_MPDU_DENS_MSK = (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT), IWM_STA_FLG_FAT_EN_20MHZ = (0 << 26), IWM_STA_FLG_FAT_EN_40MHZ = (1 << 26), IWM_STA_FLG_FAT_EN_80MHZ = (2 << 26), IWM_STA_FLG_FAT_EN_160MHZ = (3 << 26), IWM_STA_FLG_FAT_EN_MSK = (3 << 26), IWM_STA_FLG_MIMO_EN_SISO = (0 << 28), IWM_STA_FLG_MIMO_EN_MIMO2 = (1 << 28), IWM_STA_FLG_MIMO_EN_MIMO3 = (2 << 28), IWM_STA_FLG_MIMO_EN_MSK = (3 << 28), }; /** * enum iwm_sta_key_flag - key flags for the ADD_STA host command * @IWM_STA_KEY_FLG_NO_ENC: no encryption * @IWM_STA_KEY_FLG_WEP: WEP encryption algorithm * @IWM_STA_KEY_FLG_CCM: CCMP encryption algorithm * @IWM_STA_KEY_FLG_TKIP: TKIP encryption algorithm * @IWM_STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support) * @IWM_STA_KEY_FLG_CMAC: CMAC encryption algorithm * @IWM_STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm * @IWM_STA_KEY_FLG_EN_MSK: mask for encryption algorithmi value * @IWM_STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from * station info array (1 - n 1X mode) * @IWM_STA_KEY_FLG_KEYID_MSK: the index of the key * @IWM_STA_KEY_NOT_VALID: key is invalid * @IWM_STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key * @IWM_STA_KEY_MULTICAST: set for multical key * @IWM_STA_KEY_MFP: key is used for Management Frame Protection */ enum iwm_sta_key_flag { IWM_STA_KEY_FLG_NO_ENC = (0 << 0), IWM_STA_KEY_FLG_WEP = (1 << 0), IWM_STA_KEY_FLG_CCM = (2 << 0), IWM_STA_KEY_FLG_TKIP = (3 << 0), IWM_STA_KEY_FLG_EXT = (4 << 0), IWM_STA_KEY_FLG_CMAC = (6 << 0), IWM_STA_KEY_FLG_ENC_UNKNOWN = (7 << 0), IWM_STA_KEY_FLG_EN_MSK = (7 << 0), IWM_STA_KEY_FLG_WEP_KEY_MAP = (1 << 3), IWM_STA_KEY_FLG_KEYID_POS = 8, IWM_STA_KEY_FLG_KEYID_MSK = (3 << IWM_STA_KEY_FLG_KEYID_POS), IWM_STA_KEY_NOT_VALID = (1 << 11), IWM_STA_KEY_FLG_WEP_13BYTES = (1 << 12), IWM_STA_KEY_MULTICAST = (1 << 14), IWM_STA_KEY_MFP = (1 << 15), }; /** * enum iwm_sta_modify_flag - indicate to the fw what flag are being changed * @IWM_STA_MODIFY_KEY: this command modifies %key * @IWM_STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx * @IWM_STA_MODIFY_TX_RATE: unused * @IWM_STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid * @IWM_STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid * @IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count * @IWM_STA_MODIFY_PROT_TH: * @IWM_STA_MODIFY_QUEUES: modify the queues used by this station */ enum iwm_sta_modify_flag { IWM_STA_MODIFY_KEY = (1 << 0), IWM_STA_MODIFY_TID_DISABLE_TX = (1 << 1), IWM_STA_MODIFY_TX_RATE = (1 << 2), IWM_STA_MODIFY_ADD_BA_TID = (1 << 3), IWM_STA_MODIFY_REMOVE_BA_TID = (1 << 4), IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT = (1 << 5), IWM_STA_MODIFY_PROT_TH = (1 << 6), IWM_STA_MODIFY_QUEUES = (1 << 7), }; #define IWM_STA_MODE_MODIFY 1 /** * enum iwm_sta_sleep_flag - type of sleep of the station * @IWM_STA_SLEEP_STATE_AWAKE: * @IWM_STA_SLEEP_STATE_PS_POLL: * @IWM_STA_SLEEP_STATE_UAPSD: */ enum iwm_sta_sleep_flag { IWM_STA_SLEEP_STATE_AWAKE = 0, IWM_STA_SLEEP_STATE_PS_POLL = (1 << 0), IWM_STA_SLEEP_STATE_UAPSD = (1 << 1), }; /* STA ID and color bits definitions */ #define IWM_STA_ID_SEED (0x0f) #define IWM_STA_ID_POS (0) #define IWM_STA_ID_MSK (IWM_STA_ID_SEED << IWM_STA_ID_POS) #define IWM_STA_COLOR_SEED (0x7) #define IWM_STA_COLOR_POS (4) #define IWM_STA_COLOR_MSK (IWM_STA_COLOR_SEED << IWM_STA_COLOR_POS) #define IWM_STA_ID_N_COLOR_GET_COLOR(id_n_color) \ (((id_n_color) & IWM_STA_COLOR_MSK) >> IWM_STA_COLOR_POS) #define IWM_STA_ID_N_COLOR_GET_ID(id_n_color) \ (((id_n_color) & IWM_STA_ID_MSK) >> IWM_STA_ID_POS) #define IWM_STA_KEY_MAX_NUM (16) #define IWM_STA_KEY_IDX_INVALID (0xff) #define IWM_STA_KEY_MAX_DATA_KEY_NUM (4) #define IWM_MAX_GLOBAL_KEYS (4) #define IWM_STA_KEY_LEN_WEP40 (5) #define IWM_STA_KEY_LEN_WEP104 (13) /** * struct iwm_mvm_keyinfo - key information * @key_flags: type %iwm_sta_key_flag * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx * @key_offset: key offset in the fw's key table * @key: 16-byte unicast decryption key * @tx_secur_seq_cnt: initial RSC / PN needed for replay check * @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only * @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only */ struct iwm_mvm_keyinfo { uint16_t key_flags; uint8_t tkip_rx_tsc_byte2; uint8_t reserved1; uint16_t tkip_rx_ttak[5]; uint8_t key_offset; uint8_t reserved2; uint8_t key[16]; uint64_t tx_secur_seq_cnt; uint64_t hw_tkip_mic_rx_key; uint64_t hw_tkip_mic_tx_key; } __packed; /** * struct iwm_mvm_add_sta_cmd_v5 - Add/modify a station in the fw's sta table. * ( IWM_REPLY_ADD_STA = 0x18 ) * @add_modify: 1: modify existing, 0: add new station * @unicast_tx_key_id: unicast tx key id. Relevant only when unicast key sent * @multicast_tx_key_id: multicast tx key id. Relevant only when multicast key * sent * @mac_id_n_color: the Mac context this station belongs to * @addr[ETHER_ADDR_LEN]: station's MAC address * @sta_id: index of station in uCode's station table * @modify_mask: IWM_STA_MODIFY_*, selects which parameters to modify vs. leave * alone. 1 - modify, 0 - don't change. * @key: look at %iwm_mvm_keyinfo * @station_flags: look at %iwm_sta_flags * @station_flags_msk: what of %station_flags have changed * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable * AMPDU for tid x. Set %IWM_STA_MODIFY_TID_DISABLE_TX to change this field. * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) * Set %IWM_STA_MODIFY_ADD_BA_TID to use this field, and also set * add_immediate_ba_ssn. * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx) * Set %IWM_STA_MODIFY_REMOVE_BA_TID to use this field * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with * add_immediate_ba_tid. * @sleep_tx_count: number of packets to transmit to station even though it is * asleep. Used to synchronise PS-poll and u-APSD responses while ucode * keeps track of STA sleep state. * @sleep_state_flags: Look at %iwm_sta_sleep_flag. * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP * mac-addr. * @beamform_flags: beam forming controls * @tfd_queue_msk: tfd queues used by this station * * The device contains an internal table of per-station information, with info * on security keys, aggregation parameters, and Tx rates for initial Tx * attempt and any retries (set by IWM_REPLY_TX_LINK_QUALITY_CMD). * * ADD_STA sets up the table entry for one station, either creating a new * entry, or modifying a pre-existing one. */ struct iwm_mvm_add_sta_cmd_v5 { uint8_t add_modify; uint8_t unicast_tx_key_id; uint8_t multicast_tx_key_id; uint8_t reserved1; uint32_t mac_id_n_color; uint8_t addr[ETHER_ADDR_LEN]; uint16_t reserved2; uint8_t sta_id; uint8_t modify_mask; uint16_t reserved3; struct iwm_mvm_keyinfo key; uint32_t station_flags; uint32_t station_flags_msk; uint16_t tid_disable_tx; uint16_t reserved4; uint8_t add_immediate_ba_tid; uint8_t remove_immediate_ba_tid; uint16_t add_immediate_ba_ssn; uint16_t sleep_tx_count; uint16_t sleep_state_flags; uint16_t assoc_id; uint16_t beamform_flags; uint32_t tfd_queue_msk; } __packed; /* IWM_ADD_STA_CMD_API_S_VER_5 */ /** * struct iwm_mvm_add_sta_cmd_v6 - Add / modify a station * VER_6 of this command is quite similar to VER_5 except * exclusion of all fields related to the security key installation. */ struct iwm_mvm_add_sta_cmd_v6 { uint8_t add_modify; uint8_t reserved1; uint16_t tid_disable_tx; uint32_t mac_id_n_color; uint8_t addr[ETHER_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */ uint16_t reserved2; uint8_t sta_id; uint8_t modify_mask; uint16_t reserved3; uint32_t station_flags; uint32_t station_flags_msk; uint8_t add_immediate_ba_tid; uint8_t remove_immediate_ba_tid; uint16_t add_immediate_ba_ssn; uint16_t sleep_tx_count; uint16_t sleep_state_flags; uint16_t assoc_id; uint16_t beamform_flags; uint32_t tfd_queue_msk; } __packed; /* IWM_ADD_STA_CMD_API_S_VER_6 */ /** * struct iwm_mvm_add_sta_key_cmd - add/modify sta key * ( IWM_REPLY_ADD_STA_KEY = 0x17 ) * @sta_id: index of station in uCode's station table * @key_offset: key offset in key storage * @key_flags: type %iwm_sta_key_flag * @key: key material data * @key2: key material data * @rx_secur_seq_cnt: RX security sequence counter for the key * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx */ struct iwm_mvm_add_sta_key_cmd { uint8_t sta_id; uint8_t key_offset; uint16_t key_flags; uint8_t key[16]; uint8_t key2[16]; uint8_t rx_secur_seq_cnt[16]; uint8_t tkip_rx_tsc_byte2; uint8_t reserved; uint16_t tkip_rx_ttak[5]; } __packed; /* IWM_ADD_MODIFY_STA_KEY_API_S_VER_1 */ /** * enum iwm_mvm_add_sta_rsp_status - status in the response to ADD_STA command * @IWM_ADD_STA_SUCCESS: operation was executed successfully * @IWM_ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table * @IWM_ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session * @IWM_ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station * that doesn't exist. */ enum iwm_mvm_add_sta_rsp_status { IWM_ADD_STA_SUCCESS = 0x1, IWM_ADD_STA_STATIONS_OVERLOAD = 0x2, IWM_ADD_STA_IMMEDIATE_BA_FAILURE = 0x4, IWM_ADD_STA_MODIFY_NON_EXISTING_STA = 0x8, }; /** * struct iwm_mvm_rm_sta_cmd - Add / modify a station in the fw's station table * ( IWM_REMOVE_STA = 0x19 ) * @sta_id: the station id of the station to be removed */ struct iwm_mvm_rm_sta_cmd { uint8_t sta_id; uint8_t reserved[3]; } __packed; /* IWM_REMOVE_STA_CMD_API_S_VER_2 */ /** * struct iwm_mvm_mgmt_mcast_key_cmd * ( IWM_MGMT_MCAST_KEY = 0x1f ) * @ctrl_flags: %iwm_sta_key_flag * @IGTK: * @K1: IGTK master key * @K2: IGTK sub key * @sta_id: station ID that support IGTK * @key_id: * @receive_seq_cnt: initial RSC/PN needed for replay check */ struct iwm_mvm_mgmt_mcast_key_cmd { uint32_t ctrl_flags; uint8_t IGTK[16]; uint8_t K1[16]; uint8_t K2[16]; uint32_t key_id; uint32_t sta_id; uint64_t receive_seq_cnt; } __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */ struct iwm_mvm_wep_key { uint8_t key_index; uint8_t key_offset; uint16_t reserved1; uint8_t key_size; uint8_t reserved2[3]; uint8_t key[16]; } __packed; struct iwm_mvm_wep_key_cmd { uint32_t mac_id_n_color; uint8_t num_keys; uint8_t decryption_type; uint8_t flags; uint8_t reserved; struct iwm_mvm_wep_key wep_key[0]; } __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */ /* * Some cherry-picked definitions */ #define IWM_FRAME_LIMIT 64 struct iwm_cmd_header { uint8_t code; uint8_t flags; uint8_t idx; uint8_t qid; } __packed; enum iwm_power_scheme { IWM_POWER_SCHEME_CAM = 1, IWM_POWER_SCHEME_BPS, IWM_POWER_SCHEME_LP }; #define IWM_DEF_CMD_PAYLOAD_SIZE 320 #define IWM_CMD_FAILED_MSK 0x40 struct iwm_device_cmd { struct iwm_cmd_header hdr; uint8_t data[IWM_DEF_CMD_PAYLOAD_SIZE]; } __packed; struct iwm_rx_packet { /* * The first 4 bytes of the RX frame header contain both the RX frame * size and some flags. * Bit fields: * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request * 28-14: Reserved * 13-00: RX frame size */ uint32_t len_n_flags; struct iwm_cmd_header hdr; uint8_t data[]; } __packed; #define IWM_FH_RSCSR_FRAME_SIZE_MSK 0x00003fff static uint32_t iwm_rx_packet_len(const struct iwm_rx_packet *pkt) { return le32toh(pkt->len_n_flags) & IWM_FH_RSCSR_FRAME_SIZE_MSK; } static uint32_t iwm_rx_packet_payload_len(const struct iwm_rx_packet *pkt) { return iwm_rx_packet_len(pkt) - sizeof(pkt->hdr); } #define IWM_MIN_DBM -100 #define IWM_MAX_DBM -33 /* realistic guess */ #define IWM_READ(sc, reg) \ bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg)) #define IWM_WRITE(sc, reg, val) \ bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define IWM_WRITE_1(sc, reg, val) \ bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define IWM_SETBITS(sc, reg, mask) \ IWM_WRITE(sc, reg, IWM_READ(sc, reg) | (mask)) #define IWM_CLRBITS(sc, reg, mask) \ IWM_WRITE(sc, reg, IWM_READ(sc, reg) & ~(mask)) #define IWM_BARRIER_WRITE(sc) \ bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \ BUS_SPACE_BARRIER_WRITE) #define IWM_BARRIER_READ_WRITE(sc) \ bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \ BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE)