/* $OpenBSD: if_iwxreg.h,v 1.35 2022/01/28 07:11:14 guenther Exp $ */ /*- * Based on BSD-licensed source modules in the Linux iwlwifi driver, * which were used as the reference documentation for this implementation. * ****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2017 Intel Deutschland GmbH * Copyright(c) 2018 - 2019 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * BSD LICENSE * * Copyright(c) 2017 Intel Deutschland GmbH * Copyright(c) 2018 - 2019 Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ***************************************************************************** */ /* maximum number of DRAM map entries supported by FW */ #define IWX_MAX_DRAM_ENTRY 64 #define IWX_CSR_CTXT_INFO_BA 0x40 /** * enum iwx_context_info_flags - Context information control flags * @IWX_CTXT_INFO_AUTO_FUNC_INIT: If set, FW will not wait before interrupting * the init done for driver command that configures several system modes * @IWX_CTXT_INFO_EARLY_DEBUG: enable early debug * @IWX_CTXT_INFO_ENABLE_CDMP: enable core dump * @IWX_CTXT_INFO_RB_CB_SIZE_POS: position of the RBD Cyclic Buffer Size * exponent, the actual size is 2**value, valid sizes are 8-2048. * The value is four bits long. Maximum valid exponent is 12 * @IWX_CTXT_INFO_TFD_FORMAT_LONG: use long TFD Format (the * default is short format - not supported by the driver) * @IWX_CTXT_INFO_RB_SIZE_POS: RB size position * (values are IWX_CTXT_INFO_RB_SIZE_*K) * @IWX_CTXT_INFO_RB_SIZE_1K: Value for 1K RB size * @IWX_CTXT_INFO_RB_SIZE_2K: Value for 2K RB size * @IWX_CTXT_INFO_RB_SIZE_4K: Value for 4K RB size * @IWX_CTXT_INFO_RB_SIZE_8K: Value for 8K RB size * @IWX_CTXT_INFO_RB_SIZE_12K: Value for 12K RB size * @IWX_CTXT_INFO_RB_SIZE_16K: Value for 16K RB size * @IWX_CTXT_INFO_RB_SIZE_20K: Value for 20K RB size * @IWX_CTXT_INFO_RB_SIZE_24K: Value for 24K RB size * @IWX_CTXT_INFO_RB_SIZE_28K: Value for 28K RB size * @IWX_CTXT_INFO_RB_SIZE_32K: Value for 32K RB size */ enum iwx_context_info_flags { IWX_CTXT_INFO_AUTO_FUNC_INIT = (1 << 0), IWX_CTXT_INFO_EARLY_DEBUG = (1 << 1), IWX_CTXT_INFO_ENABLE_CDMP = (1 << 2), IWX_CTXT_INFO_RB_CB_SIZE_POS = 4, IWX_CTXT_INFO_TFD_FORMAT_LONG = (1 << 8), IWX_CTXT_INFO_RB_SIZE_POS = 9, IWX_CTXT_INFO_RB_SIZE_1K = 0x1, IWX_CTXT_INFO_RB_SIZE_2K = 0x2, IWX_CTXT_INFO_RB_SIZE_4K = 0x4, IWX_CTXT_INFO_RB_SIZE_8K = 0x8, IWX_CTXT_INFO_RB_SIZE_12K = 0x9, IWX_CTXT_INFO_RB_SIZE_16K = 0xa, IWX_CTXT_INFO_RB_SIZE_20K = 0xb, IWX_CTXT_INFO_RB_SIZE_24K = 0xc, IWX_CTXT_INFO_RB_SIZE_28K = 0xd, IWX_CTXT_INFO_RB_SIZE_32K = 0xe, }; /* * struct iwx_context_info_version - version structure * @mac_id: SKU and revision id * @version: context information version id * @size: the size of the context information in DWs */ struct iwx_context_info_version { uint16_t mac_id; uint16_t version; uint16_t size; uint16_t reserved; } __packed; /* * struct iwx_context_info_control - version structure * @control_flags: context information flags see &enum iwx_context_info_flags */ struct iwx_context_info_control { uint32_t control_flags; uint32_t reserved; } __packed; /* * struct iwx_context_info_dram - images DRAM map * each entry in the map represents a DRAM chunk of up to 32 KB * @umac_img: UMAC image DRAM map * @lmac_img: LMAC image DRAM map * @virtual_img: paged image DRAM map */ struct iwx_context_info_dram { uint64_t umac_img[IWX_MAX_DRAM_ENTRY]; uint64_t lmac_img[IWX_MAX_DRAM_ENTRY]; uint64_t virtual_img[IWX_MAX_DRAM_ENTRY]; } __packed; /* * struct iwx_context_info_rbd_cfg - RBDs configuration * @free_rbd_addr: default queue free RB CB base address * @used_rbd_addr: default queue used RB CB base address * @status_wr_ptr: default queue used RB status write pointer */ struct iwx_context_info_rbd_cfg { uint64_t free_rbd_addr; uint64_t used_rbd_addr; uint64_t status_wr_ptr; } __packed; /* * struct iwx_context_info_hcmd_cfg - command queue configuration * @cmd_queue_addr: address of command queue * @cmd_queue_size: number of entries */ struct iwx_context_info_hcmd_cfg { uint64_t cmd_queue_addr; uint8_t cmd_queue_size; uint8_t reserved[7]; } __packed; /* * struct iwx_context_info_dump_cfg - Core Dump configuration * @core_dump_addr: core dump (debug DRAM address) start address * @core_dump_size: size, in DWs */ struct iwx_context_info_dump_cfg { uint64_t core_dump_addr; uint32_t core_dump_size; uint32_t reserved; } __packed; /* * struct iwx_context_info_pnvm_cfg - platform NVM data configuration * @platform_nvm_addr: Platform NVM data start address * @platform_nvm_size: size in DWs */ struct iwx_context_info_pnvm_cfg { uint64_t platform_nvm_addr; uint32_t platform_nvm_size; uint32_t reserved; } __packed; /* * struct iwx_context_info_early_dbg_cfg - early debug configuration for * dumping DRAM addresses * @early_debug_addr: early debug start address * @early_debug_size: size in DWs */ struct iwx_context_info_early_dbg_cfg { uint64_t early_debug_addr; uint32_t early_debug_size; uint32_t reserved; } __packed; /* * struct iwx_context_info - device INIT configuration * @version: version information of context info and HW * @control: control flags of FH configurations * @rbd_cfg: default RX queue configuration * @hcmd_cfg: command queue configuration * @dump_cfg: core dump data * @edbg_cfg: early debug configuration * @pnvm_cfg: platform nvm configuration * @dram: firmware image addresses in DRAM */ struct iwx_context_info { struct iwx_context_info_version version; struct iwx_context_info_control control; uint64_t reserved0; struct iwx_context_info_rbd_cfg rbd_cfg; struct iwx_context_info_hcmd_cfg hcmd_cfg; uint32_t reserved1[4]; struct iwx_context_info_dump_cfg dump_cfg; struct iwx_context_info_early_dbg_cfg edbg_cfg; struct iwx_context_info_pnvm_cfg pnvm_cfg; uint32_t reserved2[16]; struct iwx_context_info_dram dram; uint32_t reserved3[16]; } __packed; #define IWX_MGMT_TID 15 #define IWX_MQ_RX_TABLE_SIZE 512 /* cb size is the exponent */ #define IWX_RX_QUEUE_CB_SIZE(x) ((sizeof(x) <= 4) ? (fls(x) - 1) : (flsl(x) - 1)) /* * CSR (control and status registers) * * CSR registers are mapped directly into PCI bus space, and are accessible * whenever platform supplies power to device, even when device is in * low power states due to driver-invoked device resets * (e.g. IWX_CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. * * Use iwl_write32() and iwl_read32() family to access these registers; * these provide simple PCI bus access, without waking up the MAC. * Do not use iwl_write_direct32() family for these registers; * no need to "grab nic access" via IWX_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. * The MAC (uCode processor, etc.) does not need to be powered up for accessing * the CSR registers. * * NOTE: Device does need to be awake in order to read this memory * via IWX_CSR_EEPROM and IWX_CSR_OTP registers */ #define IWX_CSR_HW_IF_CONFIG_REG (0x000) /* hardware interface config */ #define IWX_CSR_INT_COALESCING (0x004) /* accum ints, 32-usec units */ #define IWX_CSR_INT (0x008) /* host interrupt status/ack */ #define IWX_CSR_INT_MASK (0x00c) /* host interrupt enable */ #define IWX_CSR_FH_INT_STATUS (0x010) /* busmaster int status/ack*/ #define IWX_CSR_GPIO_IN (0x018) /* read external chip pins */ #define IWX_CSR_RESET (0x020) /* busmaster enable, NMI, etc*/ #define IWX_CSR_GP_CNTRL (0x024) /* 2nd byte of IWX_CSR_INT_COALESCING, not accessible via iwl_write32()! */ #define IWX_CSR_INT_PERIODIC_REG (0x005) /* * Hardware revision info * Bit fields: * 31-16: Reserved * 15-4: Type of device: see IWX_CSR_HW_REV_TYPE_xxx definitions * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D * 1-0: "Dash" (-) value, as in A-1, etc. */ #define IWX_CSR_HW_REV (0x028) #define IWX_CSR_GIO_REG (0x03C) /* * UCODE-DRIVER GP (general purpose) mailbox registers. * SET/CLR registers set/clear bit(s) if "1" is written. */ #define IWX_CSR_UCODE_DRV_GP1 (0x054) #define IWX_CSR_UCODE_DRV_GP1_SET (0x058) #define IWX_CSR_UCODE_DRV_GP1_CLR (0x05c) #define IWX_CSR_UCODE_DRV_GP2 (0x060) #define IWX_CSR_MBOX_SET_REG (0x088) #define IWX_CSR_MBOX_SET_REG_OS_ALIVE 0x20 #define IWX_CSR_DRAM_INT_TBL_REG (0x0A0) #define IWX_CSR_MAC_SHADOW_REG_CTRL (0x0A8) /* 6000 and up */ /* GIO Chicken Bits (PCI Express bus link power management) */ #define IWX_CSR_GIO_CHICKEN_BITS (0x100) #define IWX_CSR_DBG_HPET_MEM_REG (0x240) #define IWX_CSR_DBG_LINK_PWR_MGMT_REG (0x250) /* Bits for IWX_CSR_HW_IF_CONFIG_REG */ #define IWX_CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003) #define IWX_CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C) #define IWX_CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0) #define IWX_CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) #define IWX_CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) #define IWX_CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00) #define IWX_CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000) #define IWX_CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000) #define IWX_CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0) #define IWX_CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2) #define IWX_CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6) #define IWX_CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10) #define IWX_CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12) #define IWX_CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14) #define IWX_CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) #define IWX_CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) #define IWX_CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ #define IWX_CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ #define IWX_CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ #define IWX_CSR_HW_IF_CONFIG_REG_ENABLE_PME (0x10000000) #define IWX_CSR_HW_IF_CONFIG_REG_PERSIST_MODE (0x40000000) /* PERSISTENCE */ #define IWX_CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/ #define IWX_CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/ /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), * acknowledged (reset) by host writing "1" to flagged bits. */ #define IWX_CSR_INT_BIT_FH_RX (1U << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ #define IWX_CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ #define IWX_CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ #define IWX_CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ #define IWX_CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ #define IWX_CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ #define IWX_CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ #define IWX_CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ #define IWX_CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */ #define IWX_CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ #define IWX_CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ #define IWX_CSR_INI_SET_MASK (IWX_CSR_INT_BIT_FH_RX | \ IWX_CSR_INT_BIT_HW_ERR | \ IWX_CSR_INT_BIT_FH_TX | \ IWX_CSR_INT_BIT_SW_ERR | \ IWX_CSR_INT_BIT_RF_KILL | \ IWX_CSR_INT_BIT_SW_RX | \ IWX_CSR_INT_BIT_WAKEUP | \ IWX_CSR_INT_BIT_ALIVE | \ IWX_CSR_INT_BIT_RX_PERIODIC) /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ #define IWX_CSR_FH_INT_BIT_ERR (1U << 31) /* Error */ #define IWX_CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ #define IWX_CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ #define IWX_CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ #define IWX_CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ #define IWX_CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ #define IWX_CSR_FH_INT_RX_MASK (IWX_CSR_FH_INT_BIT_HI_PRIOR | \ IWX_CSR_FH_INT_BIT_RX_CHNL1 | \ IWX_CSR_FH_INT_BIT_RX_CHNL0) #define IWX_CSR_FH_INT_TX_MASK (IWX_CSR_FH_INT_BIT_TX_CHNL1 | \ IWX_CSR_FH_INT_BIT_TX_CHNL0) /* RESET */ #define IWX_CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) #define IWX_CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) #define IWX_CSR_RESET_REG_FLAG_SW_RESET (0x00000080) #define IWX_CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) #define IWX_CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) #define IWX_CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) /* * GP (general purpose) CONTROL REGISTER * Bit fields: * 27: HW_RF_KILL_SW * Indicates state of (platform's) hardware RF-Kill switch * 26-24: POWER_SAVE_TYPE * Indicates current power-saving mode: * 000 -- No power saving * 001 -- MAC power-down * 010 -- PHY (radio) power-down * 011 -- Error * 9-6: SYS_CONFIG * Indicates current system configuration, reflecting pins on chip * as forced high/low by device circuit board. * 4: GOING_TO_SLEEP * Indicates MAC is entering a power-saving sleep power-down. * Not a good time to access device-internal resources. * 3: MAC_ACCESS_REQ * Host sets this to request and maintain MAC wakeup, to allow host * access to device-internal resources. Host must wait for * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR * device registers. * 2: INIT_DONE * Host sets this to put device into fully operational D0 power mode. * Host resets this after SW_RESET to put device into low power mode. * 0: MAC_CLOCK_READY * Indicates MAC (ucode processor, etc.) is powered up and can run. * Internal resources are accessible. * NOTE: This does not indicate that the processor is actually running. * NOTE: This does not indicate that device has completed * init or post-power-down restore of internal SRAM memory. * Use IWX_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that * SRAM is restored and uCode is in normal operation mode. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and * do not need to save/restore it. * NOTE: After device reset, this bit remains "0" until host sets * INIT_DONE */ #define IWX_CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) #define IWX_CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) #define IWX_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) #define IWX_CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) #define IWX_CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) #define IWX_CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) #define IWX_CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN (0x04000000) #define IWX_CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) /* HW REV */ #define IWX_CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0) #define IWX_CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2) #define IWX_CSR_HW_REV_TYPE_MSK (0x000FFF0) #define IWX_CSR_HW_REV_TYPE_QUZ (0x0000354) /* CSR GIO */ #define IWX_CSR_GIO_REG_VAL_L0S_DISABLED (0x00000002) /* * UCODE-DRIVER GP (general purpose) mailbox register 1 * Host driver and uCode write and/or read this register to communicate with * each other. * Bit fields: * 4: UCODE_DISABLE * Host sets this to request permanent halt of uCode, same as * sending CARD_STATE command with "halt" bit set. * 3: CT_KILL_EXIT * Host sets this to request exit from CT_KILL state, i.e. host thinks * device temperature is low enough to continue normal operation. * 2: CMD_BLOCKED * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) * to release uCode to clear all Tx and command queues, enter * unassociated mode, and power down. * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. * 1: SW_BIT_RFKILL * Host sets this when issuing CARD_STATE command to request * device sleep. * 0: MAC_SLEEP * uCode sets this when preparing a power-saving power-down. * uCode resets this when power-up is complete and SRAM is sane. * NOTE: device saves internal SRAM data to host when powering down, * and must restore this data after powering back up. * MAC_SLEEP is the best indication that restore is complete. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and * do not need to save/restore it. */ #define IWX_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) #define IWX_CSR_UCODE_SW_BIT_RFKILL (0x00000002) #define IWX_CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) #define IWX_CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) #define IWX_CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020) /* GIO Chicken Bits (PCI Express bus link power management) */ #define IWX_CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) #define IWX_CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) /* HPET MEM debug */ #define IWX_CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) /* DRAM INT TABLE */ #define IWX_CSR_DRAM_INT_TBL_ENABLE (1U << 31) #define IWX_CSR_DRAM_INIT_TBL_WRITE_POINTER (1 << 28) #define IWX_CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) /* 22000 configuration registers */ /* * TFH Configuration register. * * BIT fields: * * Bits 3:0: * Define the maximum number of pending read requests. * Maximum configuration value allowed is 0xC * Bits 9:8: * Define the maximum transfer size. (64 / 128 / 256) * Bit 10: * When bit is set and transfer size is set to 128B, the TFH will enable * reading chunks of more than 64B only if the read address is aligned to 128B. * In case of DRAM read address which is not aligned to 128B, the TFH will * enable transfer size which doesn't cross 64B DRAM address boundary. */ #define IWX_TFH_TRANSFER_MODE (0x1F40) #define IWX_TFH_TRANSFER_MAX_PENDING_REQ 0xc #define IWX_TFH_CHUNK_SIZE_128 (1 << 8) #define IWX_TFH_CHUNK_SPLIT_MODE (1 << 10) /* * Defines the offset address in dwords referring from the beginning of the * Tx CMD which will be updated in DRAM. * Note that the TFH offset address for Tx CMD update is always referring to * the start of the TFD first TB. * In case of a DRAM Tx CMD update the TFH will update PN and Key ID */ #define IWX_TFH_TXCMD_UPDATE_CFG (0x1F48) /* * Controls TX DMA operation * * BIT fields: * * Bits 31:30: Enable the SRAM DMA channel. * Turning on bit 31 will kick the SRAM2DRAM DMA. * Note that the sram2dram may be enabled only after configuring the DRAM and * SRAM addresses registers and the byte count register. * Bits 25:24: Defines the interrupt target upon dram2sram transfer done. When * set to 1 - interrupt is sent to the driver * Bit 0: Indicates the snoop configuration */ #define IWX_TFH_SRV_DMA_CHNL0_CTRL (0x1F60) #define IWX_TFH_SRV_DMA_SNOOP (1 << 0) #define IWX_TFH_SRV_DMA_TO_DRIVER (1 << 24) #define IWX_TFH_SRV_DMA_START (1U << 31) /* Defines the DMA SRAM write start address to transfer a data block */ #define IWX_TFH_SRV_DMA_CHNL0_SRAM_ADDR (0x1F64) /* Defines the 64bits DRAM start address to read the DMA data block from */ #define IWX_TFH_SRV_DMA_CHNL0_DRAM_ADDR (0x1F68) /* * Defines the number of bytes to transfer from DRAM to SRAM. * Note that this register may be configured with non-dword aligned size. */ #define IWX_TFH_SRV_DMA_CHNL0_BC (0x1F70) /* 9000 rx series registers */ #define IWX_RFH_Q0_FRBDCB_BA_LSB 0xA08000 /* 64 bit address */ #define IWX_RFH_Q_FRBDCB_BA_LSB(q) (IWX_RFH_Q0_FRBDCB_BA_LSB + (q) * 8) /* Write index table */ #define IWX_RFH_Q0_FRBDCB_WIDX 0xA08080 #define IWX_RFH_Q_FRBDCB_WIDX(q) (IWX_RFH_Q0_FRBDCB_WIDX + (q) * 4) /* Write index table - shadow registers */ #define IWX_RFH_Q0_FRBDCB_WIDX_TRG 0x1C80 #define IWX_RFH_Q_FRBDCB_WIDX_TRG(q) (IWX_RFH_Q0_FRBDCB_WIDX_TRG + (q) * 4) /* Read index table */ #define IWX_RFH_Q0_FRBDCB_RIDX 0xA080C0 #define IWX_RFH_Q_FRBDCB_RIDX(q) (IWX_RFH_Q0_FRBDCB_RIDX + (q) * 4) /* Used list table */ #define IWX_RFH_Q0_URBDCB_BA_LSB 0xA08100 /* 64 bit address */ #define IWX_RFH_Q_URBDCB_BA_LSB(q) (IWX_RFH_Q0_URBDCB_BA_LSB + (q) * 8) /* Write index table */ #define IWX_RFH_Q0_URBDCB_WIDX 0xA08180 #define IWX_RFH_Q_URBDCB_WIDX(q) (IWX_RFH_Q0_URBDCB_WIDX + (q) * 4) #define IWX_RFH_Q0_URBDCB_VAID 0xA081C0 #define IWX_RFH_Q_URBDCB_VAID(q) (IWX_RFH_Q0_URBDCB_VAID + (q) * 4) /* stts */ #define IWX_RFH_Q0_URBD_STTS_WPTR_LSB 0xA08200 /*64 bits address */ #define IWX_RFH_Q_URBD_STTS_WPTR_LSB(q) (IWX_RFH_Q0_URBD_STTS_WPTR_LSB + (q) * 8) #define IWX_RFH_Q0_ORB_WPTR_LSB 0xA08280 #define IWX_RFH_Q_ORB_WPTR_LSB(q) (IWX_RFH_Q0_ORB_WPTR_LSB + (q) * 8) #define IWX_RFH_RBDBUF_RBD0_LSB 0xA08300 #define IWX_RFH_RBDBUF_RBD_LSB(q) (IWX_RFH_RBDBUF_RBD0_LSB + (q) * 8) /** * RFH Status Register * * Bit fields: * * Bit 29: RBD_FETCH_IDLE * This status flag is set by the RFH when there is no active RBD fetch from * DRAM. * Once the RFH RBD controller starts fetching (or when there is a pending * RBD read response from DRAM), this flag is immediately turned off. * * Bit 30: SRAM_DMA_IDLE * This status flag is set by the RFH when there is no active transaction from * SRAM to DRAM. * Once the SRAM to DRAM DMA is active, this flag is immediately turned off. * * Bit 31: RXF_DMA_IDLE * This status flag is set by the RFH when there is no active transaction from * RXF to DRAM. * Once the RXF-to-DRAM DMA is active, this flag is immediately turned off. */ #define IWX_RFH_GEN_STATUS 0xA09808 #define IWX_RFH_GEN_STATUS_GEN3 0xA07824 #define IWX_RBD_FETCH_IDLE (1 << 29) #define IWX_SRAM_DMA_IDLE (1 << 30) #define IWX_RXF_DMA_IDLE (1U << 31) /* DMA configuration */ #define IWX_RFH_RXF_DMA_CFG 0xA09820 #define IWX_RFH_RXF_DMA_CFG_GEN3 0xA07880 /* RB size */ #define IWX_RFH_RXF_DMA_RB_SIZE_MASK (0x000F0000) /* bits 16-19 */ #define IWX_RFH_RXF_DMA_RB_SIZE_POS 16 #define IWX_RFH_RXF_DMA_RB_SIZE_1K (0x1 << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_2K (0x2 << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_4K (0x4 << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_8K (0x8 << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_12K (0x9 << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_16K (0xA << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_20K (0xB << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_24K (0xC << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_28K (0xD << IWX_RFH_RXF_DMA_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_RB_SIZE_32K (0xE << IWX_RFH_RXF_DMA_RB_SIZE_POS) /* RB Circular Buffer size:defines the table sizes in RBD units */ #define IWX_RFH_RXF_DMA_RBDCB_SIZE_MASK (0x00F00000) /* bits 20-23 */ #define IWX_RFH_RXF_DMA_RBDCB_SIZE_POS 20 #define IWX_RFH_RXF_DMA_RBDCB_SIZE_8 (0x3 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_16 (0x4 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_32 (0x5 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_64 (0x7 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_128 (0x7 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_256 (0x8 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_512 (0x9 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_1024 (0xA << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_RBDCB_SIZE_2048 (0xB << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWX_RFH_RXF_DMA_MIN_RB_SIZE_MASK (0x03000000) /* bit 24-25 */ #define IWX_RFH_RXF_DMA_MIN_RB_SIZE_POS 24 #define IWX_RFH_RXF_DMA_MIN_RB_4_8 (3 << IWX_RFH_RXF_DMA_MIN_RB_SIZE_POS) #define IWX_RFH_RXF_DMA_DROP_TOO_LARGE_MASK (0x04000000) /* bit 26 */ #define IWX_RFH_RXF_DMA_SINGLE_FRAME_MASK (0x20000000) /* bit 29 */ #define IWX_RFH_DMA_EN_MASK (0xC0000000) /* bits 30-31*/ #define IWX_RFH_DMA_EN_ENABLE_VAL (1U << 31) #define IWX_RFH_RXF_RXQ_ACTIVE 0xA0980C #define IWX_RFH_GEN_CFG 0xA09800 #define IWX_RFH_GEN_CFG_SERVICE_DMA_SNOOP (1 << 0) #define IWX_RFH_GEN_CFG_RFH_DMA_SNOOP (1 << 1) #define IWX_RFH_GEN_CFG_RB_CHUNK_SIZE_128 0x00000010 #define IWX_RFH_GEN_CFG_RB_CHUNK_SIZE_64 0x00000000 /* the driver assumes everywhere that the default RXQ is 0 */ #define IWX_RFH_GEN_CFG_DEFAULT_RXQ_NUM 0xF00 /* end of 9000 rx series registers */ /* * This register is written by driver and is read by uCode during boot flow. * Note this address is cleared after MAC reset. */ #define IWX_UREG_UCODE_LOAD_STATUS (0xa05c40) #define IWX_UREG_CPU_INIT_RUN (0xa05c44) /* * HBUS (Host-side Bus) * * HBUS registers are mapped directly into PCI bus space, but are used * to indirectly access device's internal memory or registers that * may be powered-down. * * Use iwl_write_direct32()/iwl_read_direct32() family for these registers; * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ * to make sure the MAC (uCode processor, etc.) is powered up for accessing * internal resources. * * Do not use iwl_write32()/iwl_read32() family to access these registers; * these provide only simple PCI bus access, without waking up the MAC. */ #define IWX_HBUS_BASE (0x400) /* * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM * structures, error log, event log, verifying uCode load). * First write to address register, then read from or write to data register * to complete the job. Once the address register is set up, accesses to * data registers auto-increment the address by one dword. * Bit usage for address registers (read or write): * 0-31: memory address within device */ #define IWX_HBUS_TARG_MEM_RADDR (IWX_HBUS_BASE+0x00c) #define IWX_HBUS_TARG_MEM_WADDR (IWX_HBUS_BASE+0x010) #define IWX_HBUS_TARG_MEM_WDAT (IWX_HBUS_BASE+0x018) #define IWX_HBUS_TARG_MEM_RDAT (IWX_HBUS_BASE+0x01c) /* * Registers for accessing device's internal peripheral registers * (e.g. SCD, BSM, etc.). First write to address register, * then read from or write to data register to complete the job. * Bit usage for address registers (read or write): * 0-15: register address (offset) within device * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) */ #define IWX_HBUS_TARG_PRPH_WADDR (IWX_HBUS_BASE+0x044) #define IWX_HBUS_TARG_PRPH_RADDR (IWX_HBUS_BASE+0x048) #define IWX_HBUS_TARG_PRPH_WDAT (IWX_HBUS_BASE+0x04c) #define IWX_HBUS_TARG_PRPH_RDAT (IWX_HBUS_BASE+0x050) /* enable the ID buf for read */ #define IWX_WFPM_PS_CTL_CLR 0xa0300c #define IWX_WFMP_MAC_ADDR_0 0xa03080 #define IWX_WFMP_MAC_ADDR_1 0xa03084 #define IWX_LMPM_PMG_EN 0xa01cec #define IWX_RADIO_REG_SYS_MANUAL_DFT_0 0xad4078 #define IWX_RFIC_REG_RD 0xad0470 #define IWX_WFPM_CTRL_REG 0xa03030 #define IWX_WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK 0x08000000 #define IWX_ENABLE_WFPM 0x80000000 #define IWX_AUX_MISC_MASTER1_EN 0xa20818 #define IWX_AUX_MISC_MASTER1_EN_SBE_MSK 0x1 #define IWX_AUX_MISC_MASTER1_SMPHR_STATUS 0xa20800 #define IWX_RSA_ENABLE 0xa24b08 #define IWX_PREG_AUX_BUS_WPROT_0 0xa04cc0 #define IWX_PREG_PRPH_WPROT_9000 0xa04ce0 #define IWX_PREG_PRPH_WPROT_22000 0xa04d00 #define IWX_SB_CFG_OVERRIDE_ADDR 0xa26c78 #define IWX_SB_CFG_OVERRIDE_ENABLE 0x8000 #define IWX_SB_CFG_BASE_OVERRIDE 0xa20000 #define IWX_SB_MODIFY_CFG_FLAG 0xa03088 #define IWX_UMAG_SB_CPU_1_STATUS 0xa038c0 #define IWX_UMAG_SB_CPU_2_STATUS 0xa038c4 #define IWX_UREG_CHICK 0xa05c00 #define IWX_UREG_CHICK_MSI_ENABLE (1 << 24) #define IWX_UREG_CHICK_MSIX_ENABLE (1 << 25) #define IWX_HPM_DEBUG 0xa03440 #define IWX_PERSISTENCE_BIT (1 << 12) #define IWX_PREG_WFPM_ACCESS (1 << 12) #define IWX_HPM_HIPM_GEN_CFG 0xa03458 #define IWX_HPM_HIPM_GEN_CFG_CR_PG_EN (1 << 0) #define IWX_HPM_HIPM_GEN_CFG_CR_SLP_EN (1 << 1) #define IWX_HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE (1 << 10) /* * Per-Tx-queue write pointer (index, really!) * Indicates index to next TFD that driver will fill (1 past latest filled). * Bit usage: * 0-7: queue write index * 11-8: queue selector */ #define IWX_HBUS_TARG_WRPTR (IWX_HBUS_BASE+0x060) /********************************************************** * CSR values **********************************************************/ /* * host interrupt timeout value * used with setting interrupt coalescing timer * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit * * default interrupt coalescing timer is 64 x 32 = 2048 usecs */ #define IWX_HOST_INT_TIMEOUT_MAX (0xFF) #define IWX_HOST_INT_TIMEOUT_DEF (0x40) #define IWX_HOST_INT_TIMEOUT_MIN (0x0) #define IWX_HOST_INT_OPER_MODE (1U << 31) /***************************************************************************** * MSIX related registers * *****************************************************************************/ #define IWX_CSR_MSIX_BASE (0x2000) #define IWX_CSR_MSIX_FH_INT_CAUSES_AD (IWX_CSR_MSIX_BASE + 0x800) #define IWX_CSR_MSIX_FH_INT_MASK_AD (IWX_CSR_MSIX_BASE + 0x804) #define IWX_CSR_MSIX_HW_INT_CAUSES_AD (IWX_CSR_MSIX_BASE + 0x808) #define IWX_CSR_MSIX_HW_INT_MASK_AD (IWX_CSR_MSIX_BASE + 0x80C) #define IWX_CSR_MSIX_AUTOMASK_ST_AD (IWX_CSR_MSIX_BASE + 0x810) #define IWX_CSR_MSIX_RX_IVAR_AD_REG (IWX_CSR_MSIX_BASE + 0x880) #define IWX_CSR_MSIX_IVAR_AD_REG (IWX_CSR_MSIX_BASE + 0x890) #define IWX_CSR_MSIX_PENDING_PBA_AD (IWX_CSR_MSIX_BASE + 0x1000) #define IWX_CSR_MSIX_RX_IVAR(cause) (IWX_CSR_MSIX_RX_IVAR_AD_REG + (cause)) #define IWX_CSR_MSIX_IVAR(cause) (IWX_CSR_MSIX_IVAR_AD_REG + (cause)) /* * Causes for the FH register interrupts */ enum msix_fh_int_causes { IWX_MSIX_FH_INT_CAUSES_Q0 = (1 << 0), IWX_MSIX_FH_INT_CAUSES_Q1 = (1 << 1), IWX_MSIX_FH_INT_CAUSES_D2S_CH0_NUM = (1 << 16), IWX_MSIX_FH_INT_CAUSES_D2S_CH1_NUM = (1 << 17), IWX_MSIX_FH_INT_CAUSES_S2D = (1 << 19), IWX_MSIX_FH_INT_CAUSES_FH_ERR = (1 << 21), }; /* * Causes for the HW register interrupts */ enum msix_hw_int_causes { IWX_MSIX_HW_INT_CAUSES_REG_ALIVE = (1 << 0), IWX_MSIX_HW_INT_CAUSES_REG_WAKEUP = (1 << 1), IWX_MSIX_HW_INT_CAUSES_REG_IPC = (1 << 1), IWX_MSIX_HW_INT_CAUSES_REG_IML = (1 << 2), IWX_MSIX_HW_INT_CAUSES_REG_SW_ERR_V2 = (1 << 5), IWX_MSIX_HW_INT_CAUSES_REG_CT_KILL = (1 << 6), IWX_MSIX_HW_INT_CAUSES_REG_RF_KILL = (1 << 7), IWX_MSIX_HW_INT_CAUSES_REG_PERIODIC = (1 << 8), IWX_MSIX_HW_INT_CAUSES_REG_SW_ERR = (1 << 25), IWX_MSIX_HW_INT_CAUSES_REG_SCD = (1 << 26), IWX_MSIX_HW_INT_CAUSES_REG_FH_TX = (1 << 27), IWX_MSIX_HW_INT_CAUSES_REG_HW_ERR = (1 << 29), IWX_MSIX_HW_INT_CAUSES_REG_HAP = (1 << 30), }; /* * Registers to map causes to vectors */ enum msix_ivar_for_cause { IWX_MSIX_IVAR_CAUSE_D2S_CH0_NUM = 0x0, IWX_MSIX_IVAR_CAUSE_D2S_CH1_NUM = 0x1, IWX_MSIX_IVAR_CAUSE_S2D = 0x3, IWX_MSIX_IVAR_CAUSE_FH_ERR = 0x5, IWX_MSIX_IVAR_CAUSE_REG_ALIVE = 0x10, IWX_MSIX_IVAR_CAUSE_REG_WAKEUP = 0x11, IWX_MSIX_IVAR_CAUSE_REG_IML = 0x12, IWX_MSIX_IVAR_CAUSE_REG_CT_KILL = 0x16, IWX_MSIX_IVAR_CAUSE_REG_RF_KILL = 0x17, IWX_MSIX_IVAR_CAUSE_REG_PERIODIC = 0x18, IWX_MSIX_IVAR_CAUSE_REG_SW_ERR = 0x29, IWX_MSIX_IVAR_CAUSE_REG_SCD = 0x2a, IWX_MSIX_IVAR_CAUSE_REG_FH_TX = 0x2b, IWX_MSIX_IVAR_CAUSE_REG_HW_ERR = 0x2d, IWX_MSIX_IVAR_CAUSE_REG_HAP = 0x2e, }; #define IWX_MSIX_AUTO_CLEAR_CAUSE (0 << 7) #define IWX_MSIX_NON_AUTO_CLEAR_CAUSE (1 << 7) /** * uCode API flags * @IWX_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously * was a separate TLV but moved here to save space. * @IWX_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, * treats good CRC threshold as a boolean * @IWX_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWX_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. * @IWX_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS * @IWX_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD * @IWX_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan * offload profile config command. * @IWX_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses * @IWX_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element * from the probe request template. * @IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) * @IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) * @IWX_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a * single bound interface). * @IWX_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWX_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. * @IWX_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save * @IWX_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. * @IWX_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients * */ #define IWX_UCODE_TLV_FLAGS_PAN (1 << 0) #define IWX_UCODE_TLV_FLAGS_NEWSCAN (1 << 1) #define IWX_UCODE_TLV_FLAGS_MFP (1 << 2) #define IWX_UCODE_TLV_FLAGS_P2P (1 << 3) #define IWX_UCODE_TLV_FLAGS_DW_BC_TABLE (1 << 4) #define IWX_UCODE_TLV_FLAGS_SHORT_BL (1 << 7) #define IWX_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS (1 << 10) #define IWX_UCODE_TLV_FLAGS_NO_BASIC_SSID (1 << 12) #define IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL (1 << 15) #define IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE (1 << 16) #define IWX_UCODE_TLV_FLAGS_P2P_PS (1 << 21) #define IWX_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM (1 << 22) #define IWX_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM (1 << 23) #define IWX_UCODE_TLV_FLAGS_UAPSD_SUPPORT (1 << 24) #define IWX_UCODE_TLV_FLAGS_EBS_SUPPORT (1 << 25) #define IWX_UCODE_TLV_FLAGS_P2P_PS_UAPSD (1 << 26) #define IWX_UCODE_TLV_FLAGS_BCAST_FILTERING (1 << 29) #define IWX_UCODE_TLV_FLAGS_GO_UAPSD (1 << 30) #define IWX_UCODE_TLV_FLAGS_LTE_COEX (1U << 31) #define IWX_UCODE_TLV_FLAG_BITS \ "\020\1PAN\2NEWSCAN\3MFP\4P2P\5DW_BC_TABLE\6NEWBT_COEX\7PM_CMD\10SHORT_BL\11RX_ENERGY\12TIME_EVENT_V2\13D3_6_IPV6\14BF_UPDATED\15NO_BASIC_SSID\17D3_CONTINUITY\20NEW_NSOFFL_S\21NEW_NSOFFL_L\22SCHED_SCAN\24STA_KEY_CMD\25DEVICE_PS_CMD\26P2P_PS\27P2P_PS_DCM\30P2P_PS_SCM\31UAPSD_SUPPORT\32EBS\33P2P_PS_UAPSD\36BCAST_FILTERING\37GO_UAPSD\40LTE_COEX" /** * uCode TLV api * @IWX_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time * longer than the passive one, which is essential for fragmented scan. * @IWX_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * @IWX_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header * @IWX_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params * @IWX_UCODE_TLV_API_NEW_VERSION: new versioning format * @IWX_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size * (command version 3) that supports per-chain limits * @IWX_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan * iteration complete notification, and the timestamp reported for RX * received during scan, are reported in TSF of the mac specified in the * scan request. * @IWX_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of * ADD_MODIFY_STA_KEY_API_S_VER_2. * @IWX_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignment. * @IWX_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority * instead of 3. * @IWX_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used * @IWX_UCODE_TLV_API_REDUCED_SCAN_CONFIG: This ucode supports v3 of * SCAN_CONFIG_DB_CMD_API_S. * * @IWX_NUM_UCODE_TLV_API: number of bits used */ #define IWX_UCODE_TLV_API_FRAGMENTED_SCAN 8 #define IWX_UCODE_TLV_API_WIFI_MCC_UPDATE 9 #define IWX_UCODE_TLV_API_WIDE_CMD_HDR 14 #define IWX_UCODE_TLV_API_LQ_SS_PARAMS 18 #define IWX_UCODE_TLV_API_NEW_VERSION 20 #define IWX_UCODE_TLV_API_EXT_SCAN_PRIORITY 24 #define IWX_UCODE_TLV_API_TX_POWER_CHAIN 27 #define IWX_UCODE_TLV_API_SCAN_TSF_REPORT 28 #define IWX_UCODE_TLV_API_TKIP_MIC_KEYS 29 #define IWX_UCODE_TLV_API_STA_TYPE 30 #define IWX_UCODE_TLV_API_NAN2_VER2 31 #define IWX_UCODE_TLV_API_ADAPTIVE_DWELL 32 #define IWX_UCODE_TLV_API_NEW_RX_STATS 35 #define IWX_UCODE_TLV_API_WOWLAN_KEY_MATERIAL 36 #define IWX_UCODE_TLV_API_QUOTA_LOW_LATENCY 38 #define IWX_UCODE_TLV_API_DEPRECATE_TTAK 41 #define IWX_UCODE_TLV_API_ADAPTIVE_DWELL_V2 42 #define IWX_UCODE_TLV_API_NAN_NOTIF_V2 43 #define IWX_UCODE_TLV_API_FRAG_EBS 44 #define IWX_UCODE_TLV_API_REDUCE_TX_POWER 45 #define IWX_UCODE_TLV_API_SHORT_BEACON_NOTIF 46 #define IWX_UCODE_TLV_API_BEACON_FILTER_V4 47 #define IWX_UCODE_TLV_API_REGULATORY_NVM_INFO 48 #define IWX_UCODE_TLV_API_FTM_NEW_RANGE_REQ 49 #define IWX_UCODE_TLV_API_REDUCED_SCAN_CONFIG 56 #define IWX_UCODE_TLV_API_SCAN_OFFLOAD_CHANS 50 #define IWX_UCODE_TLV_API_MBSSID_HE 52 #define IWX_UCODE_TLV_API_WOWLAN_TCP_SYN_WAKE 53 #define IWX_UCODE_TLV_API_FTM_RTT_ACCURACY 54 #define IWX_UCODE_TLV_API_SAR_TABLE_VER 55 #define IWX_UCODE_TLV_API_REDUCED_SCAN_CONFIG 56 #define IWX_UCODE_TLV_API_ADWELL_HB_DEF_N_AP 57 #define IWX_UCODE_TLV_API_SCAN_EXT_CHAN_VER 58 #define IWX_UCODE_TLV_API_BAND_IN_RX_DATA 59 #define IWX_NUM_UCODE_TLV_API 128 #define IWX_UCODE_TLV_API_BITS \ "\020\10FRAGMENTED_SCAN\11WIFI_MCC_UPDATE\16WIDE_CMD_HDR\22LQ_SS_PARAMS\30EXT_SCAN_PRIO\33TX_POWER_CHAIN\35TKIP_MIC_KEYS" /** * uCode capabilities * @IWX_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 * @IWX_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory * @IWX_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. * @IWX_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer * @IWX_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM) * @IWX_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality * @IWX_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current * tx power value into TPC Report action frame and Link Measurement Report * action frame * @IWX_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current * channel in DS parameter set element in probe requests. * @IWX_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in * probe requests. * @IWX_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests * @IWX_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), * which also implies support for the scheduler configuration command * @IWX_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching * @IWX_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image * @IWX_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command * @IWX_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command * @IWX_UCODE_TLV_CAPA_2G_COEX_SUPPORT: supports 2G coex Command * @IWX_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload * @IWX_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics * @IWX_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD: support p2p standalone U-APSD * @IWX_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running * @IWX_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different * sources for the MCC. This TLV bit is a future replacement to * IWX_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR * is supported. * @IWX_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC * @IWX_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan * @IWX_UCODE_TLV_CAPA_NAN_SUPPORT: supports NAN * @IWX_UCODE_TLV_CAPA_UMAC_UPLOAD: supports upload mode in umac (1=supported, * 0=no support) * @IWx_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS: firmware supports ultra high band * (6 GHz). * @IWX_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement * @IWX_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts * @IWX_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT * @IWX_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what * antenna the beacon should be transmitted * @IWX_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon * from AP and will send it upon d0i3 exit. * @IWX_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2 * @IWX_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill * @IWX_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature * thresholds reporting * @IWX_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command * @IWX_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in * regular image. * @IWX_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared * memory addresses from the firmware. * @IWX_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement * @IWX_UCODE_TLV_CAPA_LMAC_UPLOAD: supports upload mode in lmac (1=supported, * 0=no support) * * @IWX_NUM_UCODE_TLV_CAPA: number of bits used */ #define IWX_UCODE_TLV_CAPA_D0I3_SUPPORT 0 #define IWX_UCODE_TLV_CAPA_LAR_SUPPORT 1 #define IWX_UCODE_TLV_CAPA_UMAC_SCAN 2 #define IWX_UCODE_TLV_CAPA_BEAMFORMER 3 #define IWX_UCODE_TLV_CAPA_TOF_SUPPORT 5 #define IWX_UCODE_TLV_CAPA_TDLS_SUPPORT 6 #define IWX_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT 8 #define IWX_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT 9 #define IWX_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT 10 #define IWX_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT 11 #define IWX_UCODE_TLV_CAPA_DQA_SUPPORT 12 #define IWX_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH 13 #define IWX_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG 17 #define IWX_UCODE_TLV_CAPA_HOTSPOT_SUPPORT 18 #define IWX_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT 19 #define IWX_UCODE_TLV_CAPA_2G_COEX_SUPPORT 20 #define IWX_UCODE_TLV_CAPA_CSUM_SUPPORT 21 #define IWX_UCODE_TLV_CAPA_RADIO_BEACON_STATS 22 #define IWX_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD 26 #define IWX_UCODE_TLV_CAPA_BT_COEX_PLCR 28 #define IWX_UCODE_TLV_CAPA_LAR_MULTI_MCC 29 #define IWX_UCODE_TLV_CAPA_BT_COEX_RRC 30 #define IWX_UCODE_TLV_CAPA_GSCAN_SUPPORT 31 #define IWX_UCODE_TLV_CAPA_NAN_SUPPORT 34 #define IWX_UCODE_TLV_CAPA_UMAC_UPLOAD 35 #define IWM_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT 37 #define IWX_UCODE_TLV_CAPA_STA_PM_NOTIF 38 #define IWX_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT 39 #define IWX_UCODE_TLV_CAPA_CDB_SUPPORT 40 #define IWX_UCODE_TLV_CAPA_D0I3_END_FIRST 41 #define IWX_UCODE_TLV_CAPA_TLC_OFFLOAD 43 #define IWX_UCODE_TLV_CAPA_DYNAMIC_QUOTA 44 #define IWX_UCODE_TLV_CAPA_COEX_SCHEMA_2 45 #define IWX_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD 46 #define IWX_UCODE_TLV_CAPA_FTM_CALIBRATED 47 #define IWX_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS 48 #define IWX_UCODE_TLV_CAPA_CS_MODIFY 49 #define IWX_UCODE_TLV_CAPA_SET_LTR_GEN2 50 #define IWX_UCODE_TLV_CAPA_SET_PPAG 52 #define IWX_UCODE_TLV_CAPA_TAS_CFG 53 #define IWX_UCODE_TLV_CAPA_SESSION_PROT_CMD 54 #define IWX_UCODE_TLV_CAPA_PROTECTED_TWT 56 #define IWX_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE 57 #define IWX_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN 58 #define IWX_UCODE_TLV_CAPA_PROTECTED_TWT 56 #define IWX_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE 57 #define IWX_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN 58 #define IWX_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE 64 #define IWX_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS 65 #define IWX_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT 67 #define IWX_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT 68 #define IWX_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD 70 #define IWX_UCODE_TLV_CAPA_BEACON_ANT_SELECTION 71 #define IWX_UCODE_TLV_CAPA_BEACON_STORING 72 #define IWX_UCODE_TLV_CAPA_LAR_SUPPORT_V3 73 #define IWX_UCODE_TLV_CAPA_CT_KILL_BY_FW 74 #define IWX_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT 75 #define IWX_UCODE_TLV_CAPA_CTDP_SUPPORT 76 #define IWX_UCODE_TLV_CAPA_USNIFFER_UNIFIED 77 #define IWX_UCODE_TLV_CAPA_LMAC_UPLOAD 79 #define IWX_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG 80 #define IWX_UCODE_TLV_CAPA_LQM_SUPPORT 81 #define IWX_UCODE_TLV_CAPA_TX_POWER_ACK 84 #define IWX_UCODE_TLV_CAPA_D3_DEBUG 87 #define IWX_UCODE_TLV_CAPA_LED_CMD_SUPPORT 88 #define IWX_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT 89 #define IWX_UCODE_TLV_CAPA_CSI_REPORTING 90 #define IWX_UCODE_TLV_CAPA_CSI_REPORTING_V2 91 #define IWX_UCODE_TLV_CAPA_DBG_SUSPEND_RESUME_CMD_SUPP 92 #define IWX_UCODE_TLV_CAPA_DBG_BUF_ALLOC_CMD_SUPP 93 #define IWX_UCODE_TLV_CAPA_MLME_OFFLOAD 96 #define IWX_UCODE_TLV_CAPA_BIGTK_SUPPORT 100 #define IWX_UCODE_TLV_CAPA_RFIM_SUPPORT 102 #define IWX_NUM_UCODE_TLV_CAPA 128 /* * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address. */ #define IWX_CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC #define IWX_PAGING_SEPARATOR_SECTION 0xAAAABBBB /* uCode version contains 4 values: Major/Minor/API/Serial */ #define IWX_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) #define IWX_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) #define IWX_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) #define IWX_UCODE_SERIAL(ver) ((ver) & 0x000000FF) /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwx_tlv_calib_ctrl { uint32_t flow_trigger; uint32_t event_trigger; } __packed; #define IWX_FW_PHY_CFG_RADIO_TYPE_POS 0 #define IWX_FW_PHY_CFG_RADIO_TYPE (0x3 << IWX_FW_PHY_CFG_RADIO_TYPE_POS) #define IWX_FW_PHY_CFG_RADIO_STEP_POS 2 #define IWX_FW_PHY_CFG_RADIO_STEP (0x3 << IWX_FW_PHY_CFG_RADIO_STEP_POS) #define IWX_FW_PHY_CFG_RADIO_DASH_POS 4 #define IWX_FW_PHY_CFG_RADIO_DASH (0x3 << IWX_FW_PHY_CFG_RADIO_DASH_POS) #define IWX_FW_PHY_CFG_TX_CHAIN_POS 16 #define IWX_FW_PHY_CFG_TX_CHAIN (0xf << IWX_FW_PHY_CFG_TX_CHAIN_POS) #define IWX_FW_PHY_CFG_RX_CHAIN_POS 20 #define IWX_FW_PHY_CFG_RX_CHAIN (0xf << IWX_FW_PHY_CFG_RX_CHAIN_POS) /** * struct iwx_fw_cipher_scheme - a cipher scheme supported by FW. * @cipher: a cipher suite selector * @flags: cipher scheme flags (currently reserved for a future use) * @hdr_len: a size of MPDU security header * @pn_len: a size of PN * @pn_off: an offset of pn from the beginning of the security header * @key_idx_off: an offset of key index byte in the security header * @key_idx_mask: a bit mask of key_idx bits * @key_idx_shift: bit shift needed to get key_idx * @mic_len: mic length in bytes * @hw_cipher: a HW cipher index used in host commands */ struct iwx_fw_cipher_scheme { uint32_t cipher; uint8_t flags; uint8_t hdr_len; uint8_t pn_len; uint8_t pn_off; uint8_t key_idx_off; uint8_t key_idx_mask; uint8_t key_idx_shift; uint8_t mic_len; uint8_t hw_cipher; } __packed; /** * struct iwx_fw_cscheme_list - a cipher scheme list * @size: a number of entries * @cs: cipher scheme entries */ struct iwx_fw_cscheme_list { uint8_t size; struct iwx_fw_cipher_scheme cs[]; } __packed; /* v1/v2 uCode file layout */ struct iwx_ucode_header { uint32_t ver; /* major/minor/API/serial */ union { struct { uint32_t inst_size; /* bytes of runtime code */ uint32_t data_size; /* bytes of runtime data */ uint32_t init_size; /* bytes of init code */ uint32_t init_data_size; /* bytes of init data */ uint32_t boot_size; /* bytes of bootstrap code */ uint8_t data[0]; /* in same order as sizes */ } v1; struct { uint32_t build; /* build number */ uint32_t inst_size; /* bytes of runtime code */ uint32_t data_size; /* bytes of runtime data */ uint32_t init_size; /* bytes of init code */ uint32_t init_data_size; /* bytes of init data */ uint32_t boot_size; /* bytes of bootstrap code */ uint8_t data[0]; /* in same order as sizes */ } v2; } u; }; /* * new TLV uCode file layout * * The new TLV file format contains TLVs, that each specify * some piece of data. */ #define IWX_UCODE_TLV_INVALID 0 /* unused */ #define IWX_UCODE_TLV_INST 1 #define IWX_UCODE_TLV_DATA 2 #define IWX_UCODE_TLV_INIT 3 #define IWX_UCODE_TLV_INIT_DATA 4 #define IWX_UCODE_TLV_BOOT 5 #define IWX_UCODE_TLV_PROBE_MAX_LEN 6 /* a uint32_t value */ #define IWX_UCODE_TLV_PAN 7 #define IWX_UCODE_TLV_RUNT_EVTLOG_PTR 8 #define IWX_UCODE_TLV_RUNT_EVTLOG_SIZE 9 #define IWX_UCODE_TLV_RUNT_ERRLOG_PTR 10 #define IWX_UCODE_TLV_INIT_EVTLOG_PTR 11 #define IWX_UCODE_TLV_INIT_EVTLOG_SIZE 12 #define IWX_UCODE_TLV_INIT_ERRLOG_PTR 13 #define IWX_UCODE_TLV_ENHANCE_SENS_TBL 14 #define IWX_UCODE_TLV_PHY_CALIBRATION_SIZE 15 #define IWX_UCODE_TLV_WOWLAN_INST 16 #define IWX_UCODE_TLV_WOWLAN_DATA 17 #define IWX_UCODE_TLV_FLAGS 18 #define IWX_UCODE_TLV_SEC_RT 19 #define IWX_UCODE_TLV_SEC_INIT 20 #define IWX_UCODE_TLV_SEC_WOWLAN 21 #define IWX_UCODE_TLV_DEF_CALIB 22 #define IWX_UCODE_TLV_PHY_SKU 23 #define IWX_UCODE_TLV_SECURE_SEC_RT 24 #define IWX_UCODE_TLV_SECURE_SEC_INIT 25 #define IWX_UCODE_TLV_SECURE_SEC_WOWLAN 26 #define IWX_UCODE_TLV_NUM_OF_CPU 27 #define IWX_UCODE_TLV_CSCHEME 28 #define IWX_UCODE_TLV_API_CHANGES_SET 29 #define IWX_UCODE_TLV_ENABLED_CAPABILITIES 30 #define IWX_UCODE_TLV_N_SCAN_CHANNELS 31 #define IWX_UCODE_TLV_PAGING 32 #define IWX_UCODE_TLV_SEC_RT_USNIFFER 34 #define IWX_UCODE_TLV_SDIO_ADMA_ADDR 35 #define IWX_UCODE_TLV_FW_VERSION 36 #define IWX_UCODE_TLV_FW_DBG_DEST 38 #define IWX_UCODE_TLV_FW_DBG_CONF 39 #define IWX_UCODE_TLV_FW_DBG_TRIGGER 40 #define IWX_UCODE_TLV_CMD_VERSIONS 48 #define IWX_UCODE_TLV_FW_GSCAN_CAPA 50 #define IWX_UCODE_TLV_FW_MEM_SEG 51 #define IWX_UCODE_TLV_IML 52 #define IWX_UCODE_TLV_FW_FMAC_API_VERSION 53 #define IWX_UCODE_TLV_UMAC_DEBUG_ADDRS 54 #define IWX_UCODE_TLV_LMAC_DEBUG_ADDRS 55 #define IWX_UCODE_TLV_FW_RECOVERY_INFO 57 #define IWX_UCODE_TLV_FW_FMAC_RECOVERY_INFO 59 #define IWX_UCODE_TLV_FW_FSEQ_VERSION 60 #define IWX_UCODE_TLV_PHY_INTEGRATION_VERSION 61 #define IWX_UCODE_TLV_PNVM_VERSION 62 #define IWX_UCODE_TLV_PNVM_SKU 64 #define IWX_UCODE_TLV_CONST_BASE 0x100 #define IWX_UCODE_TLV_FW_NUM_STATIONS (IWX_UCODE_TLV_CONST_BASE + 0) #define IWX_UCODE_TLV_DEBUG_BASE 0x1000005 #define IWX_UCODE_TLV_TYPE_DEBUG_INFO (IWX_UCODE_TLV_DEBUG_BASE + 0) #define IWX_UCODE_TLV_TYPE_BUFFER_ALLOCATION (IWX_UCODE_TLV_DEBUG_BASE + 1) #define IWX_UCODE_TLV_TYPE_HCMD (IWX_UCODE_TLV_DEBUG_BASE + 2) #define IWX_UCODE_TLV_TYPE_REGIONS (IWX_UCODE_TLV_DEBUG_BASE + 3) #define IWX_UCODE_TLV_TYPE_TRIGGERS (IWX_UCODE_TLV_DEBUG_BASE + 4) #define IWX_UCODE_TLV_TYPE_CONF_SET (IWX_UCODE_TLV_DEBUG_BASE + 5) #define IWX_UCODE_TLV_DEBUG_MAX IWX_UCODE_TLV_TYPE_CONF_SET struct iwx_ucode_tlv { uint32_t type; /* see above */ uint32_t length; /* not including type/length fields */ uint8_t data[0]; }; struct iwx_ucode_api { uint32_t api_index; uint32_t api_flags; } __packed; struct iwx_ucode_capa { uint32_t api_index; uint32_t api_capa; } __packed; #define IWX_TLV_UCODE_MAGIC 0x0a4c5749 struct iwx_tlv_ucode_header { /* * The TLV style ucode header is distinguished from * the v1/v2 style header by first four bytes being * zero, as such is an invalid combination of * major/minor/API/serial versions. */ uint32_t zero; uint32_t magic; uint8_t human_readable[64]; uint32_t ver; /* major/minor/API/serial */ uint32_t build; uint64_t ignore; /* * The data contained herein has a TLV layout, * see above for the TLV header and types. * Note that each TLV is padded to a length * that is a multiple of 4 for alignment. */ uint8_t data[0]; }; /* * Registers in this file are internal, not PCI bus memory mapped. * Driver accesses these via IWX_HBUS_TARG_PRPH_* registers. */ #define IWX_PRPH_BASE (0x00000) #define IWX_PRPH_END (0xFFFFF) /****************************/ /* Flow Handler Definitions */ /****************************/ /** * struct iwx_rb_status - receive buffer status * host memory mapped FH registers * @closed_rb_num [0:11] - Indicates the index of the RB which was closed * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame * which was transferred */ struct iwx_rb_status { uint16_t closed_rb_num; uint16_t closed_fr_num; uint16_t finished_rb_num; uint16_t finished_fr_nam; uint32_t unused; } __packed; #define IWX_TFD_QUEUE_SIZE_MAX (256) #define IWX_TFD_QUEUE_SIZE_MAX_GEN3 (65536) /* cb size is the exponent - 3 */ #define IWX_TFD_QUEUE_CB_SIZE(x) (IWX_RX_QUEUE_CB_SIZE(x) - 3) #define IWX_TFD_QUEUE_SIZE_BC_DUP (64) #define IWX_TFD_QUEUE_BC_SIZE (IWX_TFD_QUEUE_SIZE_MAX + \ IWX_TFD_QUEUE_SIZE_BC_DUP) #define IWX_TFD_QUEUE_BC_SIZE_GEN3 (IWX_TFD_QUEUE_SIZE_MAX_GEN3 + \ IWX_TFD_QUEUE_SIZE_BC_DUP) #define IWX_TFH_NUM_TBS 25 /** * struct iwx_tfh_tb transmit buffer descriptor within transmit frame descriptor * * This structure contains dma address and length of transmission address * * @tb_len length of the tx buffer * @addr 64 bits dma address */ struct iwx_tfh_tb { uint16_t tb_len; uint64_t addr; } __packed; /** * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. * Both driver and device share these circular buffers, each of which must be * contiguous 256 TFDs. * For pre 22000 HW it is 256 x 128 bytes-per-TFD = 32 KBytes * For 22000 HW and on it is 256 x 256 bytes-per-TFD = 65 KBytes * * Each TFD contains pointer/size information for up to 25 data buffers * in host DRAM. These buffers collectively contain the (one) frame described * by the TFD. Each buffer must be a single contiguous block of memory within * itself, but buffers may be scattered in host DRAM. Each buffer has max size * of (4K - 4). The concatenates all of a TFD's buffers into a single * Tx frame, up to 8 KBytes in size. * * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. */ /** * struct iwx_tfh_tfd - Transmit Frame Descriptor (TFD) * @ num_tbs 0-4 number of active tbs * 5 -15 reserved * @ tbs[25] transmit frame buffer descriptors * @ __pad padding */ struct iwx_tfh_tfd { uint16_t num_tbs; struct iwx_tfh_tb tbs[IWX_TFH_NUM_TBS]; uint32_t __pad; } __packed; /* Fixed (non-configurable) rx data from phy */ /** * struct iwx_agn_schedq_bc_tbl scheduler byte count table * base physical address provided by IWX_SCD_DRAM_BASE_ADDR * @tfd_offset 0-12 - tx command byte count * 12-16 - station index */ struct iwx_agn_scd_bc_tbl { uint16_t tfd_offset[IWX_TFD_QUEUE_BC_SIZE]; } __packed; /** * struct iwx_gen3_bc_tbl scheduler byte count table gen3 * For 22560 and on: * @tfd_offset: 0-12 - tx command byte count * 12-13 - number of 64 byte chunks * 14-16 - reserved */ struct iwx_gen3_bc_tbl { uint16_t tfd_offset[IWX_TFD_QUEUE_BC_SIZE_GEN3]; } __packed; /** * DQA - Dynamic Queue Allocation -introduction * * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi * to allow dynamic allocation of queues on-demand, rather than allocate them * statically ahead of time. Ideally, we would like to allocate one queue * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2 * even if it also needs to send traffic to a sleeping STA1, without being * blocked by the sleeping station. * * Although the queues in DQA mode are dynamically allocated, there are still * some queues that are statically allocated: * TXQ #0 - command queue * TXQ #1 - aux frames */ /* static DQA Tx queue numbers */ #define IWX_DQA_CMD_QUEUE 0 #define IWX_DQA_AUX_QUEUE 1 #define IWX_DQA_INJECT_MONITOR_QUEUE 2 /* used in monitor mode only */ #define IWX_DQA_MGMT_QUEUE 1 /* default queue other modes */ /* Reserve 8 DQA Tx queues for QoS data frames. */ #define IWX_MAX_TID_COUNT 8 #define IWX_FIRST_AGG_TX_QUEUE (IWX_DQA_MGMT_QUEUE + 1) #define IWX_LAST_AGG_TX_QUEUE (IWX_FIRST_AGG_TX_QUEUE + IWX_MAX_TID_COUNT - 1) #define IWX_NUM_TX_QUEUES (IWX_LAST_AGG_TX_QUEUE + 1) /** * Max Tx window size is the max number of contiguous TFDs that the scheduler * can keep track of at one time when creating block-ack chains of frames. * Note that "64" matches the number of ack bits in a block-ack packet. */ #define IWX_FRAME_LIMIT 64 #define IWX_TX_FIFO_BK 0 #define IWX_TX_FIFO_BE 1 #define IWX_TX_FIFO_VI 2 #define IWX_TX_FIFO_VO 3 #define IWX_TX_FIFO_MCAST 5 #define IWX_TX_FIFO_CMD 7 enum iwx_gen2_tx_fifo { IWX_GEN2_TX_FIFO_CMD = 0, IWX_GEN2_EDCA_TX_FIFO_BK, IWX_GEN2_EDCA_TX_FIFO_BE, IWX_GEN2_EDCA_TX_FIFO_VI, IWX_GEN2_EDCA_TX_FIFO_VO, IWX_GEN2_TRIG_TX_FIFO_BK, IWX_GEN2_TRIG_TX_FIFO_BE, IWX_GEN2_TRIG_TX_FIFO_VI, IWX_GEN2_TRIG_TX_FIFO_VO, }; /** * TXQ config options * @TX_QUEUE_CFG_ENABLE_QUEUE: enable a queue * @TX_QUEUE_CFG_TFD_SHORT_FORMAT: use short TFD format */ #define IWX_TX_QUEUE_CFG_ENABLE_QUEUE (1 << 0) #define IWX_TX_QUEUE_CFG_TFD_SHORT_FORMAT (1 << 1) #define IWX_DEFAULT_QUEUE_SIZE IWX_TFD_QUEUE_SIZE_MAX /** * struct iwx_tx_queue_cfg_cmd - txq hw scheduler config command * @sta_id: station id * @tid: tid of the queue * @flags: see &enum iwl_tx_queue_cfg_actions * @cb_size: size of TFD cyclic buffer. Value is exponent - 3. * Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs) * @byte_cnt_addr: address of byte count table * @tfdq_addr: address of TFD circular buffer */ struct iwx_tx_queue_cfg_cmd { uint8_t sta_id; uint8_t tid; uint16_t flags; uint32_t cb_size; uint64_t byte_cnt_addr; uint64_t tfdq_addr; } __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */ /** * struct iwx_tx_queue_cfg_rsp - response to txq hw scheduler config * @queue_number: queue number assigned to this RA -TID * @flags: set on failure * @write_pointer: initial value for write pointer * @reserved: reserved */ struct iwx_tx_queue_cfg_rsp { uint16_t queue_number; uint16_t flags; uint16_t write_pointer; uint16_t reserved; } __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */ /* * Commands */ #define IWX_ALIVE 0x1 #define IWX_REPLY_ERROR 0x2 #define IWX_INIT_COMPLETE_NOTIF 0x4 /* PHY context commands */ #define IWX_PHY_CONTEXT_CMD 0x8 #define IWX_DBG_CFG 0x9 /* UMAC scan commands */ #define IWX_SCAN_ITERATION_COMPLETE_UMAC 0xb5 #define IWX_SCAN_CFG_CMD 0xc #define IWX_SCAN_REQ_UMAC 0xd #define IWX_SCAN_ABORT_UMAC 0xe #define IWX_SCAN_COMPLETE_UMAC 0xf /* station table */ #define IWX_ADD_STA_KEY 0x17 #define IWX_ADD_STA 0x18 #define IWX_REMOVE_STA 0x19 /* TX */ #define IWX_TX_CMD 0x1c #define IWX_TXPATH_FLUSH 0x1e #define IWX_MGMT_MCAST_KEY 0x1f /* scheduler config */ #define IWX_SCD_QUEUE_CFG 0x1d /* global key */ #define IWX_WEP_KEY 0x20 /* MAC and Binding commands */ #define IWX_MAC_CONTEXT_CMD 0x28 #define IWX_TIME_EVENT_CMD 0x29 /* both CMD and response */ #define IWX_TIME_EVENT_NOTIFICATION 0x2a #define IWX_BINDING_CONTEXT_CMD 0x2b #define IWX_TIME_QUOTA_CMD 0x2c #define IWX_NON_QOS_TX_COUNTER_CMD 0x2d /* Calibration */ #define IWX_TEMPERATURE_NOTIFICATION 0x62 #define IWX_CALIBRATION_CFG_CMD 0x65 #define IWX_CALIBRATION_RES_NOTIFICATION 0x66 #define IWX_CALIBRATION_COMPLETE_NOTIFICATION 0x67 #define IWX_RADIO_VERSION_NOTIFICATION 0x68 /* Phy */ #define IWX_PHY_CONFIGURATION_CMD 0x6a /* Power - legacy power table command */ #define IWX_POWER_TABLE_CMD 0x77 #define IWX_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION 0x78 #define IWX_LTR_CONFIG 0xee /* NVM */ #define IWX_NVM_ACCESS_CMD 0x88 #define IWX_SET_CALIB_DEFAULT_CMD 0x8e #define IWX_BEACON_NOTIFICATION 0x90 #define IWX_BEACON_TEMPLATE_CMD 0x91 #define IWX_TX_ANT_CONFIGURATION_CMD 0x98 #define IWX_BT_CONFIG 0x9b #define IWX_STATISTICS_CMD 0x9c #define IWX_STATISTICS_NOTIFICATION 0x9d #define IWX_REDUCE_TX_POWER_CMD 0x9f /* RF-KILL commands and notifications */ #define IWX_CARD_STATE_CMD 0xa0 #define IWX_CARD_STATE_NOTIFICATION 0xa1 #define IWX_MISSED_BEACONS_NOTIFICATION 0xa2 #define IWX_MFUART_LOAD_NOTIFICATION 0xb1 /* Power - new power table command */ #define IWX_MAC_PM_POWER_TABLE 0xa9 #define IWX_REPLY_RX_PHY_CMD 0xc0 #define IWX_REPLY_RX_MPDU_CMD 0xc1 #define IWX_BAR_FRAME_RELEASE 0xc2 #define IWX_FRAME_RELEASE 0xc3 #define IWX_BA_NOTIF 0xc5 /* Location Aware Regulatory */ #define IWX_MCC_UPDATE_CMD 0xc8 #define IWX_MCC_CHUB_UPDATE_CMD 0xc9 /* BT Coex */ #define IWX_BT_COEX_PRIO_TABLE 0xcc #define IWX_BT_COEX_PROT_ENV 0xcd #define IWX_BT_PROFILE_NOTIFICATION 0xce #define IWX_BT_COEX_CI 0x5d #define IWX_REPLY_SF_CFG_CMD 0xd1 #define IWX_REPLY_BEACON_FILTERING_CMD 0xd2 /* DTS measurements */ #define IWX_CMD_DTS_MEASUREMENT_TRIGGER 0xdc #define IWX_DTS_MEASUREMENT_NOTIFICATION 0xdd #define IWX_REPLY_DEBUG_CMD 0xf0 #define IWX_DEBUG_LOG_MSG 0xf7 #define IWX_MCAST_FILTER_CMD 0xd0 /* D3 commands/notifications */ #define IWX_D3_CONFIG_CMD 0xd3 #define IWX_PROT_OFFLOAD_CONFIG_CMD 0xd4 #define IWX_OFFLOADS_QUERY_CMD 0xd5 #define IWX_REMOTE_WAKE_CONFIG_CMD 0xd6 /* for WoWLAN in particular */ #define IWX_WOWLAN_PATTERNS 0xe0 #define IWX_WOWLAN_CONFIGURATION 0xe1 #define IWX_WOWLAN_TSC_RSC_PARAM 0xe2 #define IWX_WOWLAN_TKIP_PARAM 0xe3 #define IWX_WOWLAN_KEK_KCK_MATERIAL 0xe4 #define IWX_WOWLAN_GET_STATUSES 0xe5 #define IWX_WOWLAN_TX_POWER_PER_DB 0xe6 /* and for NetDetect */ #define IWX_NET_DETECT_CONFIG_CMD 0x54 #define IWX_NET_DETECT_PROFILES_QUERY_CMD 0x56 #define IWX_NET_DETECT_PROFILES_CMD 0x57 #define IWX_NET_DETECT_HOTSPOTS_CMD 0x58 #define IWX_NET_DETECT_HOTSPOTS_QUERY_CMD 0x59 /* system group command IDs */ #define IWX_FSEQ_VER_MISMATCH_NOTIFICATION 0xff #define IWX_REPLY_MAX 0xff /* PHY_OPS subcommand IDs */ #define IWX_CMD_DTS_MEASUREMENT_TRIGGER_WIDE 0x0 #define IWX_CTDP_CONFIG_CMD 0x03 #define IWX_TEMP_REPORTING_THRESHOLDS_CMD 0x04 #define IWX_CT_KILL_NOTIFICATION 0xFE #define IWX_DTS_MEASUREMENT_NOTIF_WIDE 0xFF /* command groups */ #define IWX_LEGACY_GROUP 0x0 #define IWX_LONG_GROUP 0x1 #define IWX_SYSTEM_GROUP 0x2 #define IWX_MAC_CONF_GROUP 0x3 #define IWX_PHY_OPS_GROUP 0x4 #define IWX_DATA_PATH_GROUP 0x5 #define IWX_PROT_OFFLOAD_GROUP 0xb #define IWX_REGULATORY_AND_NVM_GROUP 0xc /* SYSTEM_GROUP group subcommand IDs */ #define IWX_SHARED_MEM_CFG_CMD 0x00 #define IWX_SOC_CONFIGURATION_CMD 0x01 #define IWX_INIT_EXTENDED_CFG_CMD 0x03 #define IWX_FW_ERROR_RECOVERY_CMD 0x07 /* MAC_CONF group subcommand IDs */ #define IWX_SESSION_PROTECTION_CMD 0x05 #define IWX_SESSION_PROTECTION_NOTIF 0xfb /* DATA_PATH group subcommand IDs */ #define IWX_DQA_ENABLE_CMD 0x00 #define IWX_TLC_MNG_CONFIG_CMD 0x0f #define IWX_RX_NO_DATA_NOTIF 0xf5 #define IWX_TLC_MNG_UPDATE_NOTIF 0xf7 /* REGULATORY_AND_NVM group subcommand IDs */ #define IWX_NVM_ACCESS_COMPLETE 0x00 #define IWX_NVM_GET_INFO 0x02 /* * struct iwx_dqa_enable_cmd * @cmd_queue: the TXQ number of the command queue */ struct iwx_dqa_enable_cmd { uint32_t cmd_queue; } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ /** * struct iwx_cmd_response - generic response struct for most commands * @status: status of the command asked, changes for each one */ struct iwx_cmd_response { uint32_t status; }; /* * struct iwx_tx_ant_cfg_cmd * @valid: valid antenna configuration */ struct iwx_tx_ant_cfg_cmd { uint32_t valid; } __packed; /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwx_calib_ctrl { uint32_t flow_trigger; uint32_t event_trigger; } __packed; /* This defines the bitmap of various calibrations to enable in both * init ucode and runtime ucode through IWX_CALIBRATION_CFG_CMD. */ #define IWX_CALIB_CFG_XTAL_IDX (1 << 0) #define IWX_CALIB_CFG_TEMPERATURE_IDX (1 << 1) #define IWX_CALIB_CFG_VOLTAGE_READ_IDX (1 << 2) #define IWX_CALIB_CFG_PAPD_IDX (1 << 3) #define IWX_CALIB_CFG_TX_PWR_IDX (1 << 4) #define IWX_CALIB_CFG_DC_IDX (1 << 5) #define IWX_CALIB_CFG_BB_FILTER_IDX (1 << 6) #define IWX_CALIB_CFG_LO_LEAKAGE_IDX (1 << 7) #define IWX_CALIB_CFG_TX_IQ_IDX (1 << 8) #define IWX_CALIB_CFG_TX_IQ_SKEW_IDX (1 << 9) #define IWX_CALIB_CFG_RX_IQ_IDX (1 << 10) #define IWX_CALIB_CFG_RX_IQ_SKEW_IDX (1 << 11) #define IWX_CALIB_CFG_SENSITIVITY_IDX (1 << 12) #define IWX_CALIB_CFG_CHAIN_NOISE_IDX (1 << 13) #define IWX_CALIB_CFG_DISCONNECTED_ANT_IDX (1 << 14) #define IWX_CALIB_CFG_ANT_COUPLING_IDX (1 << 15) #define IWX_CALIB_CFG_DAC_IDX (1 << 16) #define IWX_CALIB_CFG_ABS_IDX (1 << 17) #define IWX_CALIB_CFG_AGC_IDX (1 << 18) /* * Phy configuration command. */ struct iwx_phy_cfg_cmd { uint32_t phy_cfg; struct iwx_calib_ctrl calib_control; } __packed; #define IWX_PHY_CFG_RADIO_TYPE ((1 << 0) | (1 << 1)) #define IWX_PHY_CFG_RADIO_STEP ((1 << 2) | (1 << 3)) #define IWX_PHY_CFG_RADIO_DASH ((1 << 4) | (1 << 5)) #define IWX_PHY_CFG_PRODUCT_NUMBER ((1 << 6) | (1 << 7)) #define IWX_PHY_CFG_TX_CHAIN_A (1 << 8) #define IWX_PHY_CFG_TX_CHAIN_B (1 << 9) #define IWX_PHY_CFG_TX_CHAIN_C (1 << 10) #define IWX_PHY_CFG_RX_CHAIN_A (1 << 12) #define IWX_PHY_CFG_RX_CHAIN_B (1 << 13) #define IWX_PHY_CFG_RX_CHAIN_C (1 << 14) #define IWX_MAX_DTS_TRIPS 8 /** * struct iwx_ct_kill_notif - CT-kill entry notification * * @temperature: the current temperature in celsius * @reserved: reserved */ struct iwx_ct_kill_notif { uint16_t temperature; uint16_t reserved; } __packed; /* GRP_PHY_CT_KILL_NTF */ /** * struct iwx_temp_report_ths_cmd - set temperature thresholds * (IWX_TEMP_REPORTING_THRESHOLDS_CMD) * * @num_temps: number of temperature thresholds passed * @thresholds: array with the thresholds to be configured */ struct iwx_temp_report_ths_cmd { uint32_t num_temps; uint16_t thresholds[IWX_MAX_DTS_TRIPS]; } __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */ /* * channel flags in NVM * @IWX_NVM_CHANNEL_VALID: channel is usable for this SKU/geo * @IWX_NVM_CHANNEL_IBSS: usable as an IBSS channel * @IWX_NVM_CHANNEL_ACTIVE: active scanning allowed * @IWX_NVM_CHANNEL_RADAR: radar detection required * @IWX_NVM_CHANNEL_INDOOR_ONLY: only indoor use is allowed * @IWX_NVM_CHANNEL_GO_CONCURRENT: GO operation is allowed when connected to BSS * on same channel on 2.4 or same UNII band on 5.2 * @IWX_NVM_CHANNEL_DFS: dynamic freq selection candidate * @IWX_NVM_CHANNEL_WIDE: 20 MHz channel okay (?) * @IWX_NVM_CHANNEL_40MHZ: 40 MHz channel okay (?) * @IWX_NVM_CHANNEL_80MHZ: 80 MHz channel okay (?) * @IWX_NVM_CHANNEL_160MHZ: 160 MHz channel okay (?) * @IWX_NVM_CHANNEL_DC_HIGH: DC HIGH required/allowed (?) */ #define IWX_NVM_CHANNEL_VALID (1 << 0) #define IWX_NVM_CHANNEL_IBSS (1 << 1) #define IWX_NVM_CHANNEL_ACTIVE (1 << 3) #define IWX_NVM_CHANNEL_RADAR (1 << 4) #define IWX_NVM_CHANNEL_INDOOR_ONLY (1 << 5) #define IWX_NVM_CHANNEL_GO_CONCURRENT (1 << 6) #define IWX_NVM_CHANNEL_DFS (1 << 7) #define IWX_NVM_CHANNEL_WIDE (1 << 8) #define IWX_NVM_CHANNEL_40MHZ (1 << 9) #define IWX_NVM_CHANNEL_80MHZ (1 << 10) #define IWX_NVM_CHANNEL_160MHZ (1 << 11) #define IWX_NVM_CHANNEL_DC_HIGH (1 << 12) /** * struct iwx_nvm_access_complete_cmd - NVM_ACCESS commands are completed * @reserved: reserved */ struct iwx_nvm_access_complete_cmd { uint32_t reserved; } __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */ /* * struct iwx_nvm_get_info - request to get NVM data */ struct iwx_nvm_get_info { uint32_t reserved; } __packed; /* REGULATORY_NVM_GET_INFO_CMD_API_S_VER_1 */ /** * enum iwx_nvm_info_general_flags - flags in NVM_GET_INFO resp * @NVM_GENERAL_FLAGS_EMPTY_OTP: 1 if OTP is empty */ #define IWX_NVM_GENERAL_FLAGS_EMPTY_OTP (1 << 0) /** * struct iwx_nvm_get_info_general - general NVM data * @flags: bit 0: 1 - empty, 0 - non-empty * @nvm_version: nvm version * @board_type: board type * @n_hw_addrs: number of reserved MAC addresses */ struct iwx_nvm_get_info_general { uint32_t flags; uint16_t nvm_version; uint8_t board_type; uint8_t n_hw_addrs; } __packed; /* REGULATORY_NVM_GET_INFO_GENERAL_S_VER_2 */ /** * iwx_nvm_mac_sku_flags - flags in &iwl_nvm_get_info_sku * @NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED: true if 2.4 band enabled * @NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED: true if 5.2 band enabled * @NVM_MAC_SKU_FLAGS_802_11N_ENABLED: true if 11n enabled * @NVM_MAC_SKU_FLAGS_802_11AC_ENABLED: true if 11ac enabled * @NVM_MAC_SKU_FLAGS_802_11AX_ENABLED: true if 11ax enabled * @NVM_MAC_SKU_FLAGS_MIMO_DISABLED: true if MIMO disabled * @NVM_MAC_SKU_FLAGS_WAPI_ENABLED: true if WAPI enabled * @NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED: true if regulatory checker enabled * @NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED: true if API lock enabled */ #define IWX_NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED (1 << 0) #define IWX_NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED (1 << 1) #define IWX_NVM_MAC_SKU_FLAGS_802_11N_ENABLED (1 << 2) #define IWX_NVM_MAC_SKU_FLAGS_802_11AC_ENABLED (1 << 3) #define IWX_NVM_MAC_SKU_FLAGS_802_11AX_ENABLED (1 << 4) #define IWX_NVM_MAC_SKU_FLAGS_MIMO_DISABLED (1 << 5) #define IWX_NVM_MAC_SKU_FLAGS_WAPI_ENABLED (1 << 8) #define IWX_NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED (1 << 14) #define IWX_NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED (1 << 15) /** * struct iwx_nvm_get_info_sku - mac information * @mac_sku_flags: flags for SKU, see &enum iwl_nvm_mac_sku_flags */ struct iwx_nvm_get_info_sku { uint32_t mac_sku_flags; } __packed; /* REGULATORY_NVM_GET_INFO_MAC_SKU_SECTION_S_VER_2 */ /** * struct iwx_nvm_get_info_phy - phy information * @tx_chains: BIT 0 chain A, BIT 1 chain B * @rx_chains: BIT 0 chain A, BIT 1 chain B */ struct iwx_nvm_get_info_phy { uint32_t tx_chains; uint32_t rx_chains; } __packed; /* REGULATORY_NVM_GET_INFO_PHY_SKU_SECTION_S_VER_1 */ #define IWX_NUM_CHANNELS_V1 51 #define IWX_NUM_CHANNELS 110 /** * struct iwx_nvm_get_info_regulatory - regulatory information * @lar_enabled: is LAR enabled * @channel_profile: regulatory data of this channel * @reserved: reserved */ struct iwx_nvm_get_info_regulatory_v1 { uint32_t lar_enabled; uint16_t channel_profile[IWX_NUM_CHANNELS_V1]; uint16_t reserved; } __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_1 */ /** * struct iwx_nvm_get_info_regulatory - regulatory information * @lar_enabled: is LAR enabled * @n_channels: number of valid channels in the array * @channel_profile: regulatory data of this channel */ struct iwx_nvm_get_info_regulatory { uint32_t lar_enabled; uint32_t n_channels; uint32_t channel_profile[IWX_NUM_CHANNELS]; } __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_2 */ /** * struct iwx_nvm_get_info_rsp_v3 - response to get NVM data * @general: general NVM data * @mac_sku: data relating to MAC sku * @phy_sku: data relating to PHY sku * @regulatory: regulatory data */ struct iwx_nvm_get_info_rsp_v3 { struct iwx_nvm_get_info_general general; struct iwx_nvm_get_info_sku mac_sku; struct iwx_nvm_get_info_phy phy_sku; struct iwx_nvm_get_info_regulatory_v1 regulatory; } __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_3 */ /** * struct iwx_nvm_get_info_rsp - response to get NVM data * @general: general NVM data * @mac_sku: data relating to MAC sku * @phy_sku: data relating to PHY sku * @regulatory: regulatory data */ struct iwx_nvm_get_info_rsp { struct iwx_nvm_get_info_general general; struct iwx_nvm_get_info_sku mac_sku; struct iwx_nvm_get_info_phy phy_sku; struct iwx_nvm_get_info_regulatory regulatory; } __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4 */ #define IWX_ALIVE_STATUS_ERR 0xDEAD #define IWX_ALIVE_STATUS_OK 0xCAFE struct iwx_lmac_debug_addrs { uint32_t error_event_table_ptr; /* SRAM address for error log */ uint32_t log_event_table_ptr; /* SRAM address for LMAC event log */ uint32_t cpu_register_ptr; uint32_t dbgm_config_ptr; uint32_t alive_counter_ptr; uint32_t scd_base_ptr; /* SRAM address for SCD */ uint32_t st_fwrd_addr; /* pointer to Store and forward */ uint32_t st_fwrd_size; } __packed; /* UCODE_DEBUG_ADDRS_API_S_VER_2 */ struct iwx_lmac_alive { uint32_t ucode_major; uint32_t ucode_minor; uint8_t ver_subtype; uint8_t ver_type; uint8_t mac; uint8_t opt; uint32_t timestamp; struct iwx_lmac_debug_addrs dbg_ptrs; } __packed; /* UCODE_ALIVE_NTFY_API_S_VER_3 */ struct iwx_umac_debug_addrs { uint32_t error_info_addr; /* SRAM address for UMAC error log */ uint32_t dbg_print_buff_addr; } __packed; /* UMAC_DEBUG_ADDRS_API_S_VER_1 */ struct iwx_umac_alive { uint32_t umac_major; /* UMAC version: major */ uint32_t umac_minor; /* UMAC version: minor */ struct iwx_umac_debug_addrs dbg_ptrs; } __packed; /* UMAC_ALIVE_DATA_API_S_VER_2 */ struct iwx_alive_resp_v4 { uint16_t status; uint16_t flags; struct iwx_lmac_alive lmac_data[2]; struct iwx_umac_alive umac_data; } __packed; /* ALIVE_RES_API_S_VER_4 */ struct iwx_sku_id { uint32_t data[3]; } __packed; /* SKU_ID_API_S_VER_1 */ struct iwx_alive_resp_v5 { uint16_t status; uint16_t flags; struct iwx_lmac_alive lmac_data[2]; struct iwx_umac_alive umac_data; struct iwx_sku_id sku_id; } __packed; /* UCODE_ALIVE_NTFY_API_S_VER_5 */ #define IWX_SOC_CONFIG_CMD_FLAGS_DISCRETE (1 << 0) #define IWX_SOC_CONFIG_CMD_FLAGS_LOW_LATENCY (1 << 1) #define IWX_SOC_FLAGS_LTR_APPLY_DELAY_MASK 0xc #define IWX_SOC_FLAGS_LTR_APPLY_DELAY_NONE 0 #define IWX_SOC_FLAGS_LTR_APPLY_DELAY_200 1 #define IWX_SOC_FLAGS_LTR_APPLY_DELAY_2500 2 #define IWX_SOC_FLAGS_LTR_APPLY_DELAY_1820 3 /** * struct iwx_soc_configuration_cmd - Set device stabilization latency * * @flags: soc settings flags. In VER_1, we can only set the DISCRETE * flag, because the FW treats the whole value as an integer. In * VER_2, we can set the bits independently. * @latency: time for SOC to ensure stable power & XTAL */ struct iwx_soc_configuration_cmd { uint32_t flags; uint32_t latency; } __packed; /* * SOC_CONFIGURATION_CMD_S_VER_1 (see description above) * SOC_CONFIGURATION_CMD_S_VER_2 */ /** * commands driver may send before finishing init flow * @IWX_INIT_DEBUG_CFG: driver is going to send debug config command * @IWX_INIT_NVM: driver is going to send NVM_ACCESS commands */ #define IWX_INIT_DEBUG_CFG (1 << 0) #define IWX_INIT_NVM (1 << 1) /** * struct iwx_extended_cfg_cmd - mark what commands ucode should wait for * before finishing init flows * @init_flags: IWX_INIT_* flag bits */ struct iwx_init_extended_cfg_cmd { uint32_t init_flags; } __packed; /* INIT_EXTENDED_CFG_CMD_API_S_VER_1 */ /* Error response/notification */ #define IWX_FW_ERR_UNKNOWN_CMD 0x0 #define IWX_FW_ERR_INVALID_CMD_PARAM 0x1 #define IWX_FW_ERR_SERVICE 0x2 #define IWX_FW_ERR_ARC_MEMORY 0x3 #define IWX_FW_ERR_ARC_CODE 0x4 #define IWX_FW_ERR_WATCH_DOG 0x5 #define IWX_FW_ERR_WEP_GRP_KEY_INDX 0x10 #define IWX_FW_ERR_WEP_KEY_SIZE 0x11 #define IWX_FW_ERR_OBSOLETE_FUNC 0x12 #define IWX_FW_ERR_UNEXPECTED 0xFE #define IWX_FW_ERR_FATAL 0xFF /** * struct iwx_error_resp - FW error indication * ( IWX_REPLY_ERROR = 0x2 ) * @error_type: one of IWX_FW_ERR_* * @cmd_id: the command ID for which the error occurred * @bad_cmd_seq_num: sequence number of the erroneous command * @error_service: which service created the error, applicable only if * error_type = 2, otherwise 0 * @timestamp: TSF in usecs. */ struct iwx_error_resp { uint32_t error_type; uint8_t cmd_id; uint8_t reserved1; uint16_t bad_cmd_seq_num; uint32_t error_service; uint64_t timestamp; } __packed; enum iwx_fw_dbg_reg_operator { CSR_ASSIGN, CSR_SETBIT, CSR_CLEARBIT, PRPH_ASSIGN, PRPH_SETBIT, PRPH_CLEARBIT, INDIRECT_ASSIGN, INDIRECT_SETBIT, INDIRECT_CLEARBIT, PRPH_BLOCKBIT, }; /** * struct iwx_fw_dbg_reg_op - an operation on a register * * @op: &enum iwx_fw_dbg_reg_operator * @addr: offset of the register * @val: value */ struct iwx_fw_dbg_reg_op { uint8_t op; uint8_t reserved[3]; uint32_t addr; uint32_t val; } __packed; /** * enum iwx_fw_dbg_monitor_mode - available monitor recording modes * * @SMEM_MODE: monitor stores the data in SMEM * @EXTERNAL_MODE: monitor stores the data in allocated DRAM * @MARBH_MODE: monitor stores the data in MARBH buffer * @MIPI_MODE: monitor outputs the data through the MIPI interface */ enum iwx_fw_dbg_monitor_mode { SMEM_MODE = 0, EXTERNAL_MODE = 1, MARBH_MODE = 2, MIPI_MODE = 3, }; /** * struct iwx_fw_dbg_mem_seg_tlv - configures the debug data memory segments * * @data_type: the memory segment type to record * @ofs: the memory segment offset * @len: the memory segment length, in bytes * * This parses IWX_UCODE_TLV_FW_MEM_SEG */ struct iwx_fw_dbg_mem_seg_tlv { uint32_t data_type; uint32_t ofs; uint32_t len; } __packed; /** * struct iwx_fw_dbg_dest_tlv_v1 - configures the destination of the debug data * * @version: version of the TLV - currently 0 * @monitor_mode: &enum iwx_fw_dbg_monitor_mode * @size_power: buffer size will be 2^(size_power + 11) * @base_reg: addr of the base addr register (PRPH) * @end_reg: addr of the end addr register (PRPH) * @write_ptr_reg: the addr of the reg of the write pointer * @wrap_count: the addr of the reg of the wrap_count * @base_shift: shift right of the base addr reg * @end_shift: shift right of the end addr reg * @reg_ops: array of registers operations * * This parses IWX_UCODE_TLV_FW_DBG_DEST */ struct iwx_fw_dbg_dest_tlv_v1 { uint8_t version; uint8_t monitor_mode; uint8_t size_power; uint8_t reserved; uint32_t base_reg; uint32_t end_reg; uint32_t write_ptr_reg; uint32_t wrap_count; uint8_t base_shift; uint8_t end_shift; struct iwx_fw_dbg_reg_op reg_ops[0]; } __packed; /* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */ #define IWX_LDBG_M2S_BUF_SIZE_MSK 0x0fff0000 /* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */ #define IWX_LDBG_M2S_BUF_BA_MSK 0x00000fff /* The smem buffer chunks are in units of 256 bits */ #define IWX_M2S_UNIT_SIZE 0x100 struct iwx_fw_dbg_dest_tlv { uint8_t version; uint8_t monitor_mode; uint8_t size_power; uint8_t reserved; uint32_t cfg_reg; uint32_t write_ptr_reg; uint32_t wrap_count; uint8_t base_shift; uint8_t size_shift; struct iwx_fw_dbg_reg_op reg_ops[0]; } __packed; struct iwx_fw_dbg_conf_hcmd { uint8_t id; uint8_t reserved; uint16_t len; uint8_t data[0]; } __packed; /** * enum iwx_fw_dbg_trigger_mode - triggers functionalities * * @IWX_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism * @IWX_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data * @IWX_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to * collect only monitor data */ enum iwx_fw_dbg_trigger_mode { IWX_FW_DBG_TRIGGER_START = (1 << 0), IWX_FW_DBG_TRIGGER_STOP = (1 << 1), IWX_FW_DBG_TRIGGER_MONITOR_ONLY = (1 << 2), }; /** * enum iwx_fw_dbg_trigger_flags - the flags supported by wrt triggers * @IWX_FW_DBG_FORCE_RESTART: force a firmware restart */ enum iwx_fw_dbg_trigger_flags { IWX_FW_DBG_FORCE_RESTART = (1 << 0), }; /** * enum iwx_fw_dbg_trigger_vif_type - define the VIF type for a trigger * @IWX_FW_DBG_CONF_VIF_ANY: any vif type * @IWX_FW_DBG_CONF_VIF_IBSS: IBSS mode * @IWX_FW_DBG_CONF_VIF_STATION: BSS mode * @IWX_FW_DBG_CONF_VIF_AP: AP mode * @IWX_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode * @IWX_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode * @IWX_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device * @IWX_FW_DBG_CONF_VIF_NAN: NAN device */ enum iwx_fw_dbg_trigger_vif_type { IWX_FW_DBG_CONF_VIF_ANY = 0, IWX_FW_DBG_CONF_VIF_IBSS = 1, IWX_FW_DBG_CONF_VIF_STATION = 2, IWX_FW_DBG_CONF_VIF_AP = 3, IWX_FW_DBG_CONF_VIF_P2P_CLIENT = 8, IWX_FW_DBG_CONF_VIF_P2P_GO = 9, IWX_FW_DBG_CONF_VIF_P2P_DEVICE = 10, IWX_FW_DBG_CONF_VIF_NAN = 12, }; /** * enum iwl_fw_dbg_trigger - triggers available * * @FW_DBG_TRIGGER_USER: trigger log collection by user * This should not be defined as a trigger to the driver, but a value the * driver should set to indicate that the trigger was initiated by the * user. * @FW_DBG_TRIGGER_FW_ASSERT: trigger log collection when the firmware asserts * @FW_DBG_TRIGGER_MISSED_BEACONS: trigger log collection when beacons are * missed. * @FW_DBG_TRIGGER_CHANNEL_SWITCH: trigger log collection upon channel switch. * @FW_DBG_TRIGGER_FW_NOTIF: trigger log collection when the firmware sends a * command response or a notification. * @FW_DBG_TRIGGER_MLME: trigger log collection upon MLME event. * @FW_DBG_TRIGGER_STATS: trigger log collection upon statistics threshold. * @FW_DBG_TRIGGER_RSSI: trigger log collection when the rssi of the beacon * goes below a threshold. * @FW_DBG_TRIGGER_TXQ_TIMERS: configures the timers for the Tx queue hang * detection. * @FW_DBG_TRIGGER_TIME_EVENT: trigger log collection upon time events related * events. * @FW_DBG_TRIGGER_BA: trigger log collection upon BlockAck related events. * @FW_DBG_TX_LATENCY: trigger log collection when the tx latency goes above a * threshold. * @FW_DBG_TDLS: trigger log collection upon TDLS related events. * @FW_DBG_TRIGGER_TX_STATUS: trigger log collection upon tx status when * the firmware sends a tx reply. * @FW_DBG_TRIGGER_USER_EXTENDED: trigger log collection upon user space * request. * @FW_DBG_TRIGGER_ALIVE_TIMEOUT: trigger log collection if alive flow timeouts * @FW_DBG_TRIGGER_DRIVER: trigger log collection upon a flow failure * in the driver. */ enum iwx_fw_dbg_trigger { IWX_FW_DBG_TRIGGER_INVALID = 0, IWX_FW_DBG_TRIGGER_USER, IWX_FW_DBG_TRIGGER_FW_ASSERT, IWX_FW_DBG_TRIGGER_MISSED_BEACONS, IWX_FW_DBG_TRIGGER_CHANNEL_SWITCH, IWX_FW_DBG_TRIGGER_FW_NOTIF, IWX_FW_DBG_TRIGGER_MLME, IWX_FW_DBG_TRIGGER_STATS, IWX_FW_DBG_TRIGGER_RSSI, IWX_FW_DBG_TRIGGER_TXQ_TIMERS, IWX_FW_DBG_TRIGGER_TIME_EVENT, IWX_FW_DBG_TRIGGER_BA, IWX_FW_DBG_TRIGGER_TX_LATENCY, IWX_FW_DBG_TRIGGER_TDLS, IWX_FW_DBG_TRIGGER_TX_STATUS, IWX_FW_DBG_TRIGGER_USER_EXTENDED, IWX_FW_DBG_TRIGGER_ALIVE_TIMEOUT, IWX_FW_DBG_TRIGGER_DRIVER, /* must be last */ IWX_FW_DBG_TRIGGER_MAX, }; /** * struct iwx_fw_dbg_trigger_tlv - a TLV that describes the trigger * @id: &enum iwx_fw_dbg_trigger * @vif_type: &enum iwx_fw_dbg_trigger_vif_type * @stop_conf_ids: bitmap of configurations this trigger relates to. * if the mode is %IWX_FW_DBG_TRIGGER_STOP, then if the bit corresponding * to the currently running configuration is set, the data should be * collected. * @stop_delay: how many milliseconds to wait before collecting the data * after the STOP trigger fires. * @mode: &enum iwx_fw_dbg_trigger_mode - can be stop / start of both * @start_conf_id: if mode is %IWX_FW_DBG_TRIGGER_START, this defines what * configuration should be applied when the triggers kicks in. * @occurrences: number of occurrences. 0 means the trigger will never fire. * @trig_dis_ms: the time, in milliseconds, after an occurrence of this * trigger in which another occurrence should be ignored. * @flags: &enum iwx_fw_dbg_trigger_flags */ struct iwx_fw_dbg_trigger_tlv { uint32_t id; uint32_t vif_type; uint32_t stop_conf_ids; uint32_t stop_delay; uint8_t mode; uint8_t start_conf_id; uint16_t occurrences; uint16_t trig_dis_ms; uint8_t flags; uint8_t reserved[5]; uint8_t data[0]; } __packed; #define IWX_FW_DBG_START_FROM_ALIVE 0 #define IWX_FW_DBG_CONF_MAX 32 #define IWX_FW_DBG_INVALID 0xff /** * struct iwx_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons * @stop_consec_missed_bcon: stop recording if threshold is crossed. * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed. * @start_consec_missed_bcon: start recording if threshold is crossed. * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed. * @reserved1: reserved * @reserved2: reserved */ struct iwx_fw_dbg_trigger_missed_bcon { uint32_t stop_consec_missed_bcon; uint32_t stop_consec_missed_bcon_since_rx; uint32_t reserved2[2]; uint32_t start_consec_missed_bcon; uint32_t start_consec_missed_bcon_since_rx; uint32_t reserved1[2]; } __packed; /** * struct iwx_fw_dbg_trigger_cmd - configures trigger for messages from FW. * cmds: the list of commands to trigger the collection on */ struct iwx_fw_dbg_trigger_cmd { struct cmd { uint8_t cmd_id; uint8_t group_id; } __packed cmds[16]; } __packed; /** * iwx_fw_dbg_trigger_stats - configures trigger for statistics * @stop_offset: the offset of the value to be monitored * @stop_threshold: the threshold above which to collect * @start_offset: the offset of the value to be monitored * @start_threshold: the threshold above which to start recording */ struct iwx_fw_dbg_trigger_stats { uint32_t stop_offset; uint32_t stop_threshold; uint32_t start_offset; uint32_t start_threshold; } __packed; /** * struct iwx_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI * @rssi: RSSI value to trigger at */ struct iwx_fw_dbg_trigger_low_rssi { uint32_t rssi; } __packed; /** * struct iwx_fw_dbg_trigger_mlme - configures trigger for mlme events * @stop_auth_denied: number of denied authentication to collect * @stop_auth_timeout: number of authentication timeout to collect * @stop_rx_deauth: number of Rx deauth before to collect * @stop_tx_deauth: number of Tx deauth before to collect * @stop_assoc_denied: number of denied association to collect * @stop_assoc_timeout: number of association timeout to collect * @stop_connection_loss: number of connection loss to collect * @start_auth_denied: number of denied authentication to start recording * @start_auth_timeout: number of authentication timeout to start recording * @start_rx_deauth: number of Rx deauth to start recording * @start_tx_deauth: number of Tx deauth to start recording * @start_assoc_denied: number of denied association to start recording * @start_assoc_timeout: number of association timeout to start recording * @start_connection_loss: number of connection loss to start recording */ struct iwx_fw_dbg_trigger_mlme { uint8_t stop_auth_denied; uint8_t stop_auth_timeout; uint8_t stop_rx_deauth; uint8_t stop_tx_deauth; uint8_t stop_assoc_denied; uint8_t stop_assoc_timeout; uint8_t stop_connection_loss; uint8_t reserved; uint8_t start_auth_denied; uint8_t start_auth_timeout; uint8_t start_rx_deauth; uint8_t start_tx_deauth; uint8_t start_assoc_denied; uint8_t start_assoc_timeout; uint8_t start_connection_loss; uint8_t reserved2; } __packed; /** * struct iwx_fw_dbg_trigger_txq_timer - configures the Tx queue's timer * @command_queue: timeout for the command queue in ms * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms * @softap: timeout for the queues of a softAP in ms * @p2p_go: timeout for the queues of a P2P GO in ms * @p2p_client: timeout for the queues of a P2P client in ms * @p2p_device: timeout for the queues of a P2P device in ms * @ibss: timeout for the queues of an IBSS in ms * @tdls: timeout for the queues of a TDLS station in ms */ struct iwx_fw_dbg_trigger_txq_timer { uint32_t command_queue; uint32_t bss; uint32_t softap; uint32_t p2p_go; uint32_t p2p_client; uint32_t p2p_device; uint32_t ibss; uint32_t tdls; uint32_t reserved[4]; } __packed; /** * struct iwx_fw_dbg_trigger_time_event - configures a time event trigger * time_Events: a list of tuples . The driver will issue a * trigger each time a time event notification that relates to time event * id with one of the actions in the bitmap is received and * BIT(notif->status) is set in status_bitmap. * */ struct iwx_fw_dbg_trigger_time_event { struct { uint32_t id; uint32_t action_bitmap; uint32_t status_bitmap; } __packed time_events[16]; } __packed; /** * struct iwx_fw_dbg_trigger_ba - configures BlockAck related trigger * rx_ba_start: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is started. * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is stopped. * tx_ba_start: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is started. * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is stopped. * rx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is received (for a Tx BlockAck session). * tx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is send (for an Rx BlocAck session). * frame_timeout: tid bitmap to configure on what tid the trigger should occur * when a frame times out in the reordering buffer. */ struct iwx_fw_dbg_trigger_ba { uint16_t rx_ba_start; uint16_t rx_ba_stop; uint16_t tx_ba_start; uint16_t tx_ba_stop; uint16_t rx_bar; uint16_t tx_bar; uint16_t frame_timeout; } __packed; /** * struct iwx_fw_dbg_trigger_tx_latency - configures tx latency related trigger * @thrshold: the wanted threshold. * @tid_bitmap: the tid to apply the threshold on * @mode: recording mode (Internal buffer or continues recording) * @window: the size of the window before collecting. * @reserved: reserved. */ struct iwx_fw_dbg_trigger_tx_latency { uint32_t thrshold; uint16_t tid_bitmap; uint16_t mode; uint32_t window; uint32_t reserved[4]; } __packed; /** * struct iwx_fw_dbg_trigger_tdls - configures trigger for TDLS events. * @action_bitmap: the TDLS action to trigger the collection upon * @peer_mode: trigger on specific peer or all * @peer: the TDLS peer to trigger the collection on */ struct iwx_fw_dbg_trigger_tdls { uint8_t action_bitmap; uint8_t peer_mode; uint8_t peer[ETHER_ADDR_LEN]; uint8_t reserved[4]; } __packed; /** * struct iwx_fw_dbg_trigger_tx_status - configures trigger for tx response * status. * @statuses: the list of statuses to trigger the collection on */ struct iwx_fw_dbg_trigger_tx_status { struct tx_status { uint8_t status; uint8_t reserved[3]; } __packed statuses[16]; uint32_t reserved[2]; } __packed; /** * struct iwx_fw_dbg_conf_tlv - a TLV that describes a debug configuration. * @id: conf id * @usniffer: should the uSniffer image be used * @num_of_hcmds: how many HCMDs to send are present here * @hcmd: a variable length host command to be sent to apply the configuration. * If there is more than one HCMD to send, they will appear one after the * other and be sent in the order that they appear in. * This parses IWX_UCODE_TLV_FW_DBG_CONF. The user can add up-to * %IWX_FW_DBG_CONF_MAX configuration per run. */ struct iwx_fw_dbg_conf_tlv { uint8_t id; uint8_t usniffer; uint8_t reserved; uint8_t num_of_hcmds; struct iwx_fw_dbg_conf_hcmd hcmd; } __packed; #define IWX_FW_CMD_VER_UNKNOWN 99 /** * struct iwx_fw_cmd_version - firmware command version entry * @cmd: command ID * @group: group ID * @cmd_ver: command version * @notif_ver: notification version */ struct iwx_fw_cmd_version { uint8_t cmd; uint8_t group; uint8_t cmd_ver; uint8_t notif_ver; } __packed; /* Common PHY, MAC and Bindings definitions */ #define IWX_MAX_MACS_IN_BINDING (3) #define IWX_MAX_BINDINGS (4) #define IWX_AUX_BINDING_INDEX (3) #define IWX_MAX_PHYS (4) /* Used to extract ID and color from the context dword */ #define IWX_FW_CTXT_ID_POS (0) #define IWX_FW_CTXT_ID_MSK (0xff << IWX_FW_CTXT_ID_POS) #define IWX_FW_CTXT_COLOR_POS (8) #define IWX_FW_CTXT_COLOR_MSK (0xff << IWX_FW_CTXT_COLOR_POS) #define IWX_FW_CTXT_INVALID (0xffffffff) #define IWX_FW_CMD_ID_AND_COLOR(_id, _color) ((_id << IWX_FW_CTXT_ID_POS) |\ (_color << IWX_FW_CTXT_COLOR_POS)) /* Possible actions on PHYs, MACs and Bindings */ #define IWX_FW_CTXT_ACTION_STUB 0 #define IWX_FW_CTXT_ACTION_ADD 1 #define IWX_FW_CTXT_ACTION_MODIFY 2 #define IWX_FW_CTXT_ACTION_REMOVE 3 #define IWX_FW_CTXT_ACTION_NUM 4 /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ /* Time Events */ /* Time Event types, according to MAC type */ /* BSS Station Events */ #define IWX_TE_BSS_STA_AGGRESSIVE_ASSOC 0 #define IWX_TE_BSS_STA_ASSOC 1 #define IWX_TE_BSS_EAP_DHCP_PROT 2 #define IWX_TE_BSS_QUIET_PERIOD 3 /* P2P Device Events */ #define IWX_TE_P2P_DEVICE_DISCOVERABLE 4 #define IWX_TE_P2P_DEVICE_LISTEN 5 #define IWX_TE_P2P_DEVICE_ACTION_SCAN 6 #define IWX_TE_P2P_DEVICE_FULL_SCAN 7 /* P2P Client Events */ #define IWX_TE_P2P_CLIENT_AGGRESSIVE_ASSOC 8 #define IWX_TE_P2P_CLIENT_ASSOC 9 #define IWX_TE_P2P_CLIENT_QUIET_PERIOD 10 /* P2P GO Events */ #define IWX_TE_P2P_GO_ASSOC_PROT 11 #define IWX_TE_P2P_GO_REPETITIVE_NOA 12 #define IWX_TE_P2P_GO_CT_WINDOW 13 /* WiDi Sync Events */ #define IWX_TE_WIDI_TX_SYNC 14 /* Time event - defines for command API */ /** * DOC: Time Events - what is it? * * Time Events are a fw feature that allows the driver to control the presence * of the device on the channel. Since the fw supports multiple channels * concurrently, the fw may choose to jump to another channel at any time. * In order to make sure that the fw is on a specific channel at a certain time * and for a certain duration, the driver needs to issue a time event. * * The simplest example is for BSS association. The driver issues a time event, * waits for it to start, and only then tells mac80211 that we can start the * association. This way, we make sure that the association will be done * smoothly and won't be interrupted by channel switch decided within the fw. */ /** * DOC: The flow against the fw * * When the driver needs to make sure we are in a certain channel, at a certain * time and for a certain duration, it sends a Time Event. The flow against the * fw goes like this: * 1) Driver sends a TIME_EVENT_CMD to the fw * 2) Driver gets the response for that command. This response contains the * Unique ID (UID) of the event. * 3) The fw sends notification when the event starts. * * Of course the API provides various options that allow to cover parameters * of the flow. * What is the duration of the event? * What is the start time of the event? * Is there an end-time for the event? * How much can the event be delayed? * Can the event be split? * If yes what is the maximal number of chunks? * etc... */ /* * @IWX_TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. * @IWX_TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @IWX_TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @IWX_TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ #define IWX_TE_V2_FRAG_NONE 0 #define IWX_TE_V2_FRAG_SINGLE 1 #define IWX_TE_V2_FRAG_DUAL 2 #define IWX_TE_V2_FRAG_MAX 0xfe #define IWX_TE_V2_FRAG_ENDLESS 0xff /* Repeat the time event endlessly (until removed) */ #define IWX_TE_V2_REPEAT_ENDLESS 0xff /* If a Time Event has bounded repetitions, this is the maximal value */ #define IWX_TE_V2_REPEAT_MAX 0xfe #define IWX_TE_V2_PLACEMENT_POS 12 #define IWX_TE_V2_ABSENCE_POS 15 /* Time event policy values * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. * * @IWX_TE_V2_DEFAULT_POLICY: independent, social, present, unoticable * @IWX_TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start * @IWX_TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end * @IWX_TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use * @IWX_TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. * @IWX_TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @IWX_TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @IWX_TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. * @IWX_TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. * @IWX_TE_V2_DEP_OTHER: depends on another time event * @IWX_TE_V2_DEP_TSF: depends on a specific time * @IWX_TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of the same MAC * @IWX_TE_V2_ABSENCE: are we present or absent during the Time Event. */ #define IWX_TE_V2_DEFAULT_POLICY 0x0 /* notifications (event start/stop, fragment start/stop) */ #define IWX_TE_V2_NOTIF_HOST_EVENT_START (1 << 0) #define IWX_TE_V2_NOTIF_HOST_EVENT_END (1 << 1) #define IWX_TE_V2_NOTIF_INTERNAL_EVENT_START (1 << 2) #define IWX_TE_V2_NOTIF_INTERNAL_EVENT_END (1 << 3) #define IWX_TE_V2_NOTIF_HOST_FRAG_START (1 << 4) #define IWX_TE_V2_NOTIF_HOST_FRAG_END (1 << 5) #define IWX_TE_V2_NOTIF_INTERNAL_FRAG_START (1 << 6) #define IWX_TE_V2_NOTIF_INTERNAL_FRAG_END (1 << 7) #define IWX_T2_V2_START_IMMEDIATELY (1 << 11) #define IWX_TE_V2_NOTIF_MSK 0xff /* placement characteristics */ #define IWX_TE_V2_DEP_OTHER (1 << IWX_TE_V2_PLACEMENT_POS) #define IWX_TE_V2_DEP_TSF (1 << (IWX_TE_V2_PLACEMENT_POS + 1)) #define IWX_TE_V2_EVENT_SOCIOPATHIC (1 << (IWX_TE_V2_PLACEMENT_POS + 2)) /* are we present or absent during the Time Event. */ #define IWX_TE_V2_ABSENCE (1 << IWX_TE_V2_ABSENCE_POS) /** * struct iwx_time_event_cmd_api - configuring Time Events * with struct IWX_MAC_TIME_EVENT_DATA_API_S_VER_2 (see also * with version 1. determined by IWX_UCODE_TLV_FLAGS) * ( IWX_TIME_EVENT_CMD = 0x29 ) * @id_and_color: ID and color of the relevant MAC * @action: action to perform, one of IWX_FW_CTXT_ACTION_* * @id: this field has two meanings, depending on the action: * If the action is ADD, then it means the type of event to add. * For all other actions it is the unique event ID assigned when the * event was added by the FW. * @apply_time: When to start the Time Event (in GP2) * @max_delay: maximum delay to event's start (apply time), in TU * @depends_on: the unique ID of the event we depend on (if any) * @interval: interval between repetitions, in TU * @duration: duration of event in TU * @repeat: how many repetitions to do, can be IWX_TE_REPEAT_ENDLESS * @max_frags: maximal number of fragments the Time Event can be divided to * @policy: defines whether uCode shall notify the host or other uCode modules * on event and/or fragment start and/or end * using one of IWX_TE_INDEPENDENT, IWX_TE_DEP_OTHER, IWX_TE_DEP_TSF * IWX_TE_EVENT_SOCIOPATHIC * using IWX_TE_ABSENCE and using IWX_TE_NOTIF_* */ struct iwx_time_event_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; uint32_t id; /* IWX_MAC_TIME_EVENT_DATA_API_S_VER_2 */ uint32_t apply_time; uint32_t max_delay; uint32_t depends_on; uint32_t interval; uint32_t duration; uint8_t repeat; uint8_t max_frags; uint16_t policy; } __packed; /* IWX_MAC_TIME_EVENT_CMD_API_S_VER_2 */ /** * struct iwx_time_event_resp - response structure to iwx_time_event_cmd * @status: bit 0 indicates success, all others specify errors * @id: the Time Event type * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE * @id_and_color: ID and color of the relevant MAC */ struct iwx_time_event_resp { uint32_t status; uint32_t id; uint32_t unique_id; uint32_t id_and_color; } __packed; /* IWX_MAC_TIME_EVENT_RSP_API_S_VER_1 */ /** * struct iwx_time_event_notif - notifications of time event start/stop * ( IWX_TIME_EVENT_NOTIFICATION = 0x2a ) * @timestamp: action timestamp in GP2 * @session_id: session's unique id * @unique_id: unique id of the Time Event itself * @id_and_color: ID and color of the relevant MAC * @action: one of IWX_TE_NOTIF_START or IWX_TE_NOTIF_END * @status: true if scheduled, false otherwise (not executed) */ struct iwx_time_event_notif { uint32_t timestamp; uint32_t session_id; uint32_t unique_id; uint32_t id_and_color; uint32_t action; uint32_t status; } __packed; /* IWX_MAC_TIME_EVENT_NTFY_API_S_VER_1 */ /** * enum iwx_session_prot_conf_id - session protection's configurations * @SESSION_PROTECT_CONF_ASSOC: Start a session protection for association. * The firmware will allocate two events. * Valid for BSS_STA and P2P_STA. * * A rather short event that can't be fragmented and with a very * high priority. If every goes well (99% of the cases) the * association should complete within this first event. During * that event, no other activity will happen in the firmware, * which is why it can't be too long. * The length of this event is hard-coded in the firmware: 300TUs. * * Another event which can be much longer (its duration is * configurable by the driver) which has a slightly lower * priority and that can be fragmented allowing other activities * to run while this event is running. * The firmware will automatically remove both events once the driver sets * the BSS MAC as associated. Neither of the events will be removed * for the P2P_STA MAC. * Only the duration is configurable for this protection. * @SESSION_PROTECT_CONF_GO_CLIENT_ASSOC: not used * @SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV: Schedule the P2P Device to be in * listen mode. Will be fragmented. Valid only on the P2P Device MAC. * Valid only on the P2P Device MAC. The firmware will take into account * the duration, the interval and the repetition count. * @SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION: Schedule the P2P Device to be be * able to run the GO Negotiation. Will not be fragmented and not * repetitive. Valid only on the P2P Device MAC. Only the duration will * be taken into account. * @SESSION_PROTECT_CONF_MAX_ID: not used */ enum iwx_session_prot_conf_id { IWX_SESSION_PROTECT_CONF_ASSOC, IWX_SESSION_PROTECT_CONF_GO_CLIENT_ASSOC, IWX_SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV, IWX_SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION, IWX_SESSION_PROTECT_CONF_MAX_ID, }; /* SESSION_PROTECTION_CONF_ID_E_VER_1 */ /** * struct iwx_session_prot_cmd - configure a session protection * @id_and_color: the id and color of the mac for which this session protection * is sent * @action: can be either FW_CTXT_ACTION_ADD or FW_CTXT_ACTION_REMOVE * @conf_id: see &enum iwx_mvm_session_prot_conf_id * @duration_tu: the duration of the whole protection in TUs. * @repetition_count: not used * @interval: not used * * Note: the session protection will always be scheduled to start as * early as possible, but the maximum delay is configuration dependent. * The firmware supports only one concurrent session protection per vif. * Adding a new session protection will remove any currently running session. */ struct iwx_session_prot_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ uint32_t id_and_color; uint32_t action; uint32_t conf_id; uint32_t duration_tu; uint32_t repetition_count; uint32_t interval; } __packed; /* SESSION_PROTECTION_CMD_API_S_VER_1 */ /** * struct iwx_session_prot_notif - session protection started / ended * @mac_id: the mac id for which the session protection started / ended * @status: 1 means success, 0 means failure * @start: 1 means the session protection started, 0 means it ended * @conf_id: see &enum iwx_mvm_session_prot_conf_id * * Note that any session protection will always get two notifications: start * and end even the firmware could not schedule it. */ struct iwx_session_prot_notif { uint32_t mac_id; uint32_t status; uint32_t start; uint32_t conf_id; } __packed; /* SESSION_PROTECTION_NOTIFICATION_API_S_VER_2 */ /* Bindings and Time Quota */ /** * struct iwx_binding_cmd - configuring bindings * ( IWX_BINDING_CONTEXT_CMD = 0x2b ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWX_FW_CTXT_ACTION_* * @macs: array of MAC id and colors which belong to the binding * @phy: PHY id and color which belongs to the binding * @lmac_id: the lmac id the binding belongs to */ struct iwx_binding_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWX_BINDING_DATA_API_S_VER_1 */ uint32_t macs[IWX_MAX_MACS_IN_BINDING]; uint32_t phy; uint32_t lmac_id; } __packed; /* IWX_BINDING_CMD_API_S_VER_2 */ #define IWX_LMAC_24G_INDEX 0 #define IWX_LMAC_5G_INDEX 1 /* The maximal number of fragments in the FW's schedule session */ #define IWX_MAX_QUOTA 128 /** * struct iwx_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding * @quota: absolute time quota in TU. The scheduler will try to divide the * remaining quota (after Time Events) according to this quota. * @max_duration: max uninterrupted context duration in TU */ struct iwx_time_quota_data { uint32_t id_and_color; uint32_t quota; uint32_t max_duration; } __packed; /* IWX_TIME_QUOTA_DATA_API_S_VER_1 */ /** * struct iwx_time_quota_cmd - configuration of time quota between bindings * ( IWX_TIME_QUOTA_CMD = 0x2c ) * @quotas: allocations per binding */ struct iwx_time_quota_cmd { struct iwx_time_quota_data quotas[IWX_MAX_BINDINGS]; } __packed; /* IWX_TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ /* PHY context */ /* Supported bands */ #define IWX_PHY_BAND_5 (0) #define IWX_PHY_BAND_24 (1) /* Supported channel width, vary if there is VHT support */ #define IWX_PHY_VHT_CHANNEL_MODE20 (0x0) #define IWX_PHY_VHT_CHANNEL_MODE40 (0x1) #define IWX_PHY_VHT_CHANNEL_MODE80 (0x2) #define IWX_PHY_VHT_CHANNEL_MODE160 (0x3) /* * Control channel position: * For legacy set bit means upper channel, otherwise lower. * For VHT - bit-2 marks if the control is lower/upper relative to center-freq * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. * center_freq * | * 40Mhz |_______|_______| * 80Mhz |_______|_______|_______|_______| * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| * code 011 010 001 000 | 100 101 110 111 */ #define IWX_PHY_VHT_CTRL_POS_1_BELOW (0x0) #define IWX_PHY_VHT_CTRL_POS_2_BELOW (0x1) #define IWX_PHY_VHT_CTRL_POS_3_BELOW (0x2) #define IWX_PHY_VHT_CTRL_POS_4_BELOW (0x3) #define IWX_PHY_VHT_CTRL_POS_1_ABOVE (0x4) #define IWX_PHY_VHT_CTRL_POS_2_ABOVE (0x5) #define IWX_PHY_VHT_CTRL_POS_3_ABOVE (0x6) #define IWX_PHY_VHT_CTRL_POS_4_ABOVE (0x7) /* * @band: IWX_PHY_BAND_* * @channel: channel number * @width: PHY_[VHT|LEGACY]_CHANNEL_* * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* */ struct iwx_fw_channel_info_v1 { uint8_t band; uint8_t channel; uint8_t width; uint8_t ctrl_pos; } __packed; /* CHANNEL_CONFIG_API_S_VER_1 */ /* * struct iwx_fw_channel_info - channel information * * @channel: channel number * @band: PHY_BAND_* * @width: PHY_[VHT|LEGACY]_CHANNEL_* * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* * @reserved: for future use and alignment */ struct iwx_fw_channel_info { uint32_t channel; uint8_t band; uint8_t width; uint8_t ctrl_pos; uint8_t reserved; } __packed; /*CHANNEL_CONFIG_API_S_VER_2 */ #define IWX_PHY_RX_CHAIN_DRIVER_FORCE_POS (0) #define IWX_PHY_RX_CHAIN_DRIVER_FORCE_MSK \ (0x1 << IWX_PHY_RX_CHAIN_DRIVER_FORCE_POS) #define IWX_PHY_RX_CHAIN_VALID_POS (1) #define IWX_PHY_RX_CHAIN_VALID_MSK \ (0x7 << IWX_PHY_RX_CHAIN_VALID_POS) #define IWX_PHY_RX_CHAIN_FORCE_SEL_POS (4) #define IWX_PHY_RX_CHAIN_FORCE_SEL_MSK \ (0x7 << IWX_PHY_RX_CHAIN_FORCE_SEL_POS) #define IWX_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) #define IWX_PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ (0x7 << IWX_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) #define IWX_PHY_RX_CHAIN_CNT_POS (10) #define IWX_PHY_RX_CHAIN_CNT_MSK \ (0x3 << IWX_PHY_RX_CHAIN_CNT_POS) #define IWX_PHY_RX_CHAIN_MIMO_CNT_POS (12) #define IWX_PHY_RX_CHAIN_MIMO_CNT_MSK \ (0x3 << IWX_PHY_RX_CHAIN_MIMO_CNT_POS) #define IWX_PHY_RX_CHAIN_MIMO_FORCE_POS (14) #define IWX_PHY_RX_CHAIN_MIMO_FORCE_MSK \ (0x1 << IWX_PHY_RX_CHAIN_MIMO_FORCE_POS) /* TODO: fix the value, make it depend on firmware at runtime? */ #define IWX_NUM_PHY_CTX 3 /** * struct iwl_phy_context_cmd - config of the PHY context * ( IWX_PHY_CONTEXT_CMD = 0x8 ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWX_FW_CTXT_ACTION_* * @lmac_id: the lmac id the phy context belongs to * @ci: channel info * @rxchain_info: ??? * @dsp_cfg_flags: set to 0 * @reserved: reserved to align to 64 bit */ struct iwx_phy_context_cmd_uhb { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* PHY_CONTEXT_DATA_API_S_VER_3 */ struct iwx_fw_channel_info ci; uint32_t lmac_id; uint32_t rxchain_info; uint32_t dsp_cfg_flags; uint32_t reserved; } __packed; /* PHY_CONTEXT_CMD_API_VER_3 */ struct iwx_phy_context_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* PHY_CONTEXT_DATA_API_S_VER_3 */ struct iwx_fw_channel_info_v1 ci; uint32_t lmac_id; uint32_t rxchain_info; uint32_t dsp_cfg_flags; uint32_t reserved; } __packed; /* PHY_CONTEXT_CMD_API_VER_3 */ /* TODO: complete missing documentation */ /** * struct iwx_phy_context_cmd - config of the PHY context * ( IWX_PHY_CONTEXT_CMD = 0x8 ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWX_FW_CTXT_ACTION_* * @apply_time: 0 means immediate apply and context switch. * other value means apply new params after X usecs * @tx_param_color: ??? * @channel_info: * @txchain_info: ??? * @rxchain_info: ??? * @acquisition_data: ??? * @dsp_cfg_flags: set to 0 */ /* * XXX Intel forgot to bump the PHY_CONTEXT command API when they increased * the size of fw_channel_info from v1 to v2. * To keep things simple we define two versions of this struct, and both * are labeled as CMD_API_VER_1. (The Linux iwlwifi driver performs dark * magic with pointers to struct members instead.) */ /* This version must be used if IWX_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS is set: */ struct iwx_phy_context_cmd_uhb_v1 { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWX_PHY_CONTEXT_DATA_API_S_VER_1 */ uint32_t apply_time; uint32_t tx_param_color; struct iwx_fw_channel_info ci; uint32_t txchain_info; uint32_t rxchain_info; uint32_t acquisition_data; uint32_t dsp_cfg_flags; } __packed; /* IWX_PHY_CONTEXT_CMD_API_VER_1 */ /* This version must be used otherwise: */ struct iwx_phy_context_cmd_v1 { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWX_PHY_CONTEXT_DATA_API_S_VER_1 */ uint32_t apply_time; uint32_t tx_param_color; struct iwx_fw_channel_info_v1 ci; uint32_t txchain_info; uint32_t rxchain_info; uint32_t acquisition_data; uint32_t dsp_cfg_flags; } __packed; /* IWX_PHY_CONTEXT_CMD_API_VER_1 */ #define IWX_RX_INFO_PHY_CNT 8 #define IWX_RX_INFO_ENERGY_ANT_ABC_IDX 1 #define IWX_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff #define IWX_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00 #define IWX_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000 #define IWX_RX_INFO_ENERGY_ANT_A_POS 0 #define IWX_RX_INFO_ENERGY_ANT_B_POS 8 #define IWX_RX_INFO_ENERGY_ANT_C_POS 16 #define IWX_RX_INFO_AGC_IDX 1 #define IWX_RX_INFO_RSSI_AB_IDX 2 #define IWX_OFDM_AGC_A_MSK 0x0000007f #define IWX_OFDM_AGC_A_POS 0 #define IWX_OFDM_AGC_B_MSK 0x00003f80 #define IWX_OFDM_AGC_B_POS 7 #define IWX_OFDM_AGC_CODE_MSK 0x3fe00000 #define IWX_OFDM_AGC_CODE_POS 20 #define IWX_OFDM_RSSI_INBAND_A_MSK 0x00ff #define IWX_OFDM_RSSI_A_POS 0 #define IWX_OFDM_RSSI_ALLBAND_A_MSK 0xff00 #define IWX_OFDM_RSSI_ALLBAND_A_POS 8 #define IWX_OFDM_RSSI_INBAND_B_MSK 0xff0000 #define IWX_OFDM_RSSI_B_POS 16 #define IWX_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 #define IWX_OFDM_RSSI_ALLBAND_B_POS 24 /** * struct iwx_rx_phy_info - phy info * (IWX_REPLY_RX_PHY_CMD = 0xc0) * @non_cfg_phy_cnt: non configurable DSP phy data byte count * @cfg_phy_cnt: configurable DSP phy data byte count * @stat_id: configurable DSP phy data set ID * @reserved1: * @system_timestamp: GP2 at on air rise * @timestamp: TSF at on air rise * @beacon_time_stamp: beacon at on-air rise * @phy_flags: general phy flags: band, modulation, ... * @channel: channel number * @non_cfg_phy_buf: for various implementations of non_cfg_phy * @rate_n_flags: IWX_RATE_MCS_* * @byte_count: frame's byte-count * @frame_time: frame's time on the air, based on byte count and frame rate * calculation * @mac_active_msk: what MACs were active when the frame was received * * Before each Rx, the device sends this data. It contains PHY information * about the reception of the packet. */ struct iwx_rx_phy_info { uint8_t non_cfg_phy_cnt; uint8_t cfg_phy_cnt; uint8_t stat_id; uint8_t reserved1; uint32_t system_timestamp; uint64_t timestamp; uint32_t beacon_time_stamp; uint16_t phy_flags; #define IWX_PHY_INFO_FLAG_SHPREAMBLE (1 << 2) uint16_t channel; uint32_t non_cfg_phy[IWX_RX_INFO_PHY_CNT]; uint32_t rate_n_flags; uint32_t byte_count; uint16_t mac_active_msk; uint16_t frame_time; } __packed; struct iwx_rx_mpdu_res_start { uint16_t byte_count; uint16_t reserved; } __packed; /** * Values to parse %iwx_rx_phy_info phy_flags * @IWX_RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band * @IWX_RX_RES_PHY_FLAGS_MOD_CCK: * @IWX_RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short * @IWX_RX_RES_PHY_FLAGS_NARROW_BAND: * @IWX_RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received * @IWX_RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU * @IWX_RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame * @IWX_RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble * @IWX_RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame */ #define IWX_RX_RES_PHY_FLAGS_BAND_24 (1 << 0) #define IWX_RX_RES_PHY_FLAGS_MOD_CCK (1 << 1) #define IWX_RX_RES_PHY_FLAGS_SHORT_PREAMBLE (1 << 2) #define IWX_RX_RES_PHY_FLAGS_NARROW_BAND (1 << 3) #define IWX_RX_RES_PHY_FLAGS_ANTENNA (0x7 << 4) #define IWX_RX_RES_PHY_FLAGS_ANTENNA_POS 4 #define IWX_RX_RES_PHY_FLAGS_AGG (1 << 7) #define IWX_RX_RES_PHY_FLAGS_OFDM_HT (1 << 8) #define IWX_RX_RES_PHY_FLAGS_OFDM_GF (1 << 9) #define IWX_RX_RES_PHY_FLAGS_OFDM_VHT (1 << 10) /** * Values written by fw for each Rx packet * @IWX_RX_MPDU_RES_STATUS_CRC_OK: CRC is fine * @IWX_RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow * @IWX_RX_MPDU_RES_STATUS_SRC_STA_FOUND: * @IWX_RX_MPDU_RES_STATUS_KEY_VALID: * @IWX_RX_MPDU_RES_STATUS_KEY_PARAM_OK: * @IWX_RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed * @IWX_RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked * in the driver. * @IWX_RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine * @IWX_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or * alg = CCM only. Checks replay attack for 11w frames. Relevant only if * %IWX_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set. * @IWX_RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted * @IWX_RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP * @IWX_RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM * @IWX_RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP * @IWX_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC * @IWX_RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted * @IWX_RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm * @IWX_RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted * @IWX_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP: * @IWX_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP: * @IWX_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT: * @IWX_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame * @IWX_RX_MPDU_RES_STATUS_HASH_INDEX_MSK: * @IWX_RX_MPDU_RES_STATUS_STA_ID_MSK: * @IWX_RX_MPDU_RES_STATUS_RRF_KILL: * @IWX_RX_MPDU_RES_STATUS_FILTERING_MSK: * @IWX_RX_MPDU_RES_STATUS2_FILTERING_MSK: */ #define IWX_RX_MPDU_RES_STATUS_CRC_OK (1 << 0) #define IWX_RX_MPDU_RES_STATUS_OVERRUN_OK (1 << 1) #define IWX_RX_MPDU_RES_STATUS_SRC_STA_FOUND (1 << 2) #define IWX_RX_MPDU_RES_STATUS_KEY_VALID (1 << 3) #define IWX_RX_MPDU_RES_STATUS_KEY_PARAM_OK (1 << 4) #define IWX_RX_MPDU_RES_STATUS_ICV_OK (1 << 5) #define IWX_RX_MPDU_RES_STATUS_MIC_OK (1 << 6) #define IWX_RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) #define IWX_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR (1 << 7) #define IWX_RX_MPDU_RES_STATUS_SEC_NO_ENC (0 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_WEP_ENC (1 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_CCM_ENC (2 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_TKIP_ENC (3 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_EXT_ENC (4 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC (6 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_ENC_ERR (7 << 8) #define IWX_RX_MPDU_RES_STATUS_SEC_ENC_MSK (7 << 8) #define IWX_RX_MPDU_RES_STATUS_DEC_DONE (1 << 11) #define IWX_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP (1 << 12) #define IWX_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP (1 << 13) #define IWX_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT (1 << 14) #define IWX_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME (1 << 15) #define IWX_RX_MPDU_RES_STATUS_HASH_INDEX_MSK (0x3F0000) #define IWX_RX_MPDU_RES_STATUS_STA_ID_MSK (0x1f000000) #define IWX_RX_MPDU_RES_STATUS_RRF_KILL (1 << 29) #define IWX_RX_MPDU_RES_STATUS_FILTERING_MSK (0xc00000) #define IWX_RX_MPDU_RES_STATUS2_FILTERING_MSK (0xc0000000) #define IWX_RX_MPDU_MFLG1_ADDRTYPE_MASK 0x03 #define IWX_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK 0xf0 #define IWX_RX_MPDU_MFLG1_MIC_CRC_LEN_SHIFT 3 #define IWX_RX_MPDU_MFLG2_HDR_LEN_MASK 0x1f #define IWX_RX_MPDU_MFLG2_PAD 0x20 #define IWX_RX_MPDU_MFLG2_AMSDU 0x40 #define IWX_RX_MPDU_AMSDU_SUBFRAME_IDX_MASK 0x7f #define IWX_RX_MPDU_AMSDU_LAST_SUBFRAME 0x80 #define IWX_RX_MPDU_PHY_AMPDU (1 << 5) #define IWX_RX_MPDU_PHY_AMPDU_TOGGLE (1 << 6) #define IWX_RX_MPDU_PHY_SHORT_PREAMBLE (1 << 7) #define IWX_RX_MPDU_PHY_NCCK_ADDTL_NTFY (1 << 7) #define IWX_RX_MPDU_PHY_TSF_OVERLOAD (1 << 8) struct iwx_rx_mpdu_desc_v1 { union { uint32_t rss_hash; uint32_t phy_data2; }; union { uint32_t filter_match; uint32_t phy_data3; }; uint32_t rate_n_flags; uint8_t energy_a; uint8_t energy_b; uint8_t channel; uint8_t mac_context; uint32_t gp2_on_air_rise; union { uint64_t tsf_on_air_rise; struct { uint32_t phy_data0; uint32_t phy_data1; }; }; } __packed; #define IWX_RX_REORDER_DATA_INVALID_BAID 0x7f #define IWX_RX_MPDU_REORDER_NSSN_MASK 0x00000fff #define IWX_RX_MPDU_REORDER_SN_MASK 0x00fff000 #define IWX_RX_MPDU_REORDER_SN_SHIFT 12 #define IWX_RX_MPDU_REORDER_BAID_MASK 0x7f000000 #define IWX_RX_MPDU_REORDER_BAID_SHIFT 24 #define IWX_RX_MPDU_REORDER_BA_OLD_SN 0x80000000 struct iwx_rx_mpdu_desc { uint16_t mpdu_len; uint8_t mac_flags1; uint8_t mac_flags2; uint8_t amsdu_info; uint16_t phy_info; uint8_t mac_phy_idx; uint16_t raw_csum; union { uint16_t l3l4_flags; uint16_t phy_data4; }; uint16_t status; uint8_t hash_filter; uint8_t sta_id_flags; uint32_t reorder_data; struct iwx_rx_mpdu_desc_v1 v1; } __packed; struct iwx_frame_release { uint8_t baid; uint8_t reserved; uint16_t nssn; }; /** * enum iwx_bar_frame_release_sta_tid - STA/TID information for BAR release * @IWX_BAR_FRAME_RELEASE_TID_MASK: TID mask * @IWX_BAR_FRAME_RELEASE_STA_MASK: STA mask */ #define IWX_BAR_FRAME_RELEASE_TID_MASK 0x0000000f #define IWX_BAR_FRAME_RELEASE_STA_MASK 0x000001f0 #define IWX_BAR_FRAME_RELEASE_STA_SHIFT 4 /** * enum iwx_bar_frame_release_ba_info - BA information for BAR release * @IWL_BAR_FRAME_RELEASE_NSSN_MASK: NSSN mask * @IWL_BAR_FRAME_RELEASE_SN_MASK: SN mask (ignored by driver) * @IWL_BAR_FRAME_RELEASE_BAID_MASK: BAID mask */ #define IWX_BAR_FRAME_RELEASE_NSSN_MASK 0x00000fff #define IWX_BAR_FRAME_RELEASE_SN_MASK 0x00fff000 #define IWX_BAR_FRAME_RELEASE_SN_SHIFT 12 #define IWX_BAR_FRAME_RELEASE_BAID_MASK 0x3f000000 #define IWX_BAR_FRAME_RELEASE_BAID_SHIFT 24 /** * struct iwx_bar_frame_release - frame release from BAR info * @sta_tid: STA & TID information, see &enum iwx_bar_frame_release_sta_tid. * @ba_info: BA information, see &enum iwx_bar_frame_release_ba_info. */ struct iwx_bar_frame_release { uint32_t sta_tid; uint32_t ba_info; } __packed; /* RX_BAR_TO_FRAME_RELEASE_API_S_VER_1 */ /** * struct iwx_radio_version_notif - information on the radio version * ( IWX_RADIO_VERSION_NOTIFICATION = 0x68 ) * @radio_flavor: * @radio_step: * @radio_dash: */ struct iwx_radio_version_notif { uint32_t radio_flavor; uint32_t radio_step; uint32_t radio_dash; } __packed; /* IWX_RADIO_VERSION_NOTOFICATION_S_VER_1 */ #define IWX_CARD_ENABLED 0x00 #define IWX_HW_CARD_DISABLED 0x01 #define IWX_SW_CARD_DISABLED 0x02 #define IWX_CT_KILL_CARD_DISABLED 0x04 #define IWX_HALT_CARD_DISABLED 0x08 #define IWX_CARD_DISABLED_MSK 0x0f #define IWX_CARD_IS_RX_ON 0x10 /** * struct iwx_radio_version_notif - information on the radio version * (IWX_CARD_STATE_NOTIFICATION = 0xa1 ) * @flags: %iwx_card_state_flags */ struct iwx_card_state_notif { uint32_t flags; } __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ /** * struct iwx_missed_beacons_notif - information on missed beacons * ( IWX_MISSED_BEACONS_NOTIFICATION = 0xa2 ) * @mac_id: interface ID * @consec_missed_beacons_since_last_rx: number of consecutive missed * beacons since last RX. * @consec_missed_beacons: number of consecutive missed beacons * @num_expected_beacons: * @num_recvd_beacons: */ struct iwx_missed_beacons_notif { uint32_t mac_id; uint32_t consec_missed_beacons_since_last_rx; uint32_t consec_missed_beacons; uint32_t num_expected_beacons; uint32_t num_recvd_beacons; } __packed; /* IWX_MISSED_BEACON_NTFY_API_S_VER_3 */ /** * struct iwx_mfuart_load_notif - mfuart image version & status * ( IWX_MFUART_LOAD_NOTIFICATION = 0xb1 ) * @installed_ver: installed image version * @external_ver: external image version * @status: MFUART loading status * @duration: MFUART loading time */ struct iwx_mfuart_load_notif { uint32_t installed_ver; uint32_t external_ver; uint32_t status; uint32_t duration; } __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/ /** * struct iwx_set_calib_default_cmd - set default value for calibration. * ( IWX_SET_CALIB_DEFAULT_CMD = 0x8e ) * @calib_index: the calibration to set value for * @length: of data * @data: the value to set for the calibration result */ struct iwx_set_calib_default_cmd { uint16_t calib_index; uint16_t length; uint8_t data[0]; } __packed; /* IWX_PHY_CALIB_OVERRIDE_VALUES_S */ #define IWX_MAX_PORT_ID_NUM 2 #define IWX_MAX_MCAST_FILTERING_ADDRESSES 256 /** * struct iwx_mcast_filter_cmd - configure multicast filter. * @filter_own: Set 1 to filter out multicast packets sent by station itself * @port_id: Multicast MAC addresses array specifier. This is a strange way * to identify network interface adopted in host-device IF. * It is used by FW as index in array of addresses. This array has * IWX_MAX_PORT_ID_NUM members. * @count: Number of MAC addresses in the array * @pass_all: Set 1 to pass all multicast packets. * @bssid: current association BSSID. * @addr_list: Place holder for array of MAC addresses. * IMPORTANT: add padding if necessary to ensure DWORD alignment. */ struct iwx_mcast_filter_cmd { uint8_t filter_own; uint8_t port_id; uint8_t count; uint8_t pass_all; uint8_t bssid[6]; uint8_t reserved[2]; uint8_t addr_list[0]; } __packed; /* IWX_MCAST_FILTERING_CMD_API_S_VER_1 */ struct iwx_statistics_dbg { uint32_t burst_check; uint32_t burst_count; uint32_t wait_for_silence_timeout_cnt; uint32_t reserved[3]; } __packed; /* IWX_STATISTICS_DEBUG_API_S_VER_2 */ struct iwx_statistics_div { uint32_t tx_on_a; uint32_t tx_on_b; uint32_t exec_time; uint32_t probe_time; uint32_t rssi_ant; uint32_t reserved2; } __packed; /* IWX_STATISTICS_SLOW_DIV_API_S_VER_2 */ struct iwx_statistics_bt_activity { uint32_t hi_priority_tx_req_cnt; uint32_t hi_priority_tx_denied_cnt; uint32_t lo_priority_tx_req_cnt; uint32_t lo_priority_tx_denied_cnt; uint32_t hi_priority_rx_req_cnt; uint32_t hi_priority_rx_denied_cnt; uint32_t lo_priority_rx_req_cnt; uint32_t lo_priority_rx_denied_cnt; } __packed; /* IWX_STATISTICS_BT_ACTIVITY_API_S_VER_1 */ struct iwx_statistics_general_common { uint32_t radio_temperature; struct iwx_statistics_dbg dbg; uint32_t sleep_time; uint32_t slots_out; uint32_t slots_idle; uint32_t ttl_timestamp; struct iwx_statistics_div slow_div; uint32_t rx_enable_counter; /* * num_of_sos_states: * count the number of times we have to re-tune * in order to get out of bad PHY status */ uint32_t num_of_sos_states; uint32_t beacon_filtered; uint32_t missed_beacons; uint8_t beacon_filter_average_energy; uint8_t beacon_filter_reason; uint8_t beacon_filter_current_energy; uint8_t beacon_filter_reserved; uint32_t beacon_filter_delta_time; struct iwx_statistics_bt_activity bt_activity; uint64_t rx_time; uint64_t on_time_rf; uint64_t on_time_scan; uint64_t tx_time; } __packed; /* STATISTICS_GENERAL_API_S_VER_10 */ struct iwx_statistics_rx_non_phy { uint32_t bogus_cts; /* CTS received when not expecting CTS */ uint32_t bogus_ack; /* ACK received when not expecting ACK */ uint32_t non_bssid_frames; /* number of frames with BSSID that * doesn't belong to the STA BSSID */ uint32_t filtered_frames; /* count frames that were dumped in the * filtering process */ uint32_t non_channel_beacons; /* beacons with our bss id but not on * our serving channel */ uint32_t channel_beacons; /* beacons with our bss id and in our * serving channel */ uint32_t num_missed_bcon; /* number of missed beacons */ uint32_t adc_rx_saturation_time; /* count in 0.8us units the time the * ADC was in saturation */ uint32_t ina_detection_search_time;/* total time (in 0.8us) searched * for INA */ uint32_t beacon_silence_rssi[3];/* RSSI silence after beacon frame */ uint32_t interference_data_flag; /* flag for interference data * availability. 1 when data is * available. */ uint32_t channel_load; /* counts RX Enable time in uSec */ uint32_t dsp_false_alarms; /* DSP false alarm (both OFDM * and CCK) counter */ uint32_t beacon_rssi_a; uint32_t beacon_rssi_b; uint32_t beacon_rssi_c; uint32_t beacon_energy_a; uint32_t beacon_energy_b; uint32_t beacon_energy_c; uint32_t num_bt_kills; uint32_t mac_id; uint32_t directed_data_mpdu; } __packed; /* IWX_STATISTICS_RX_NON_PHY_API_S_VER_3 */ struct iwx_statistics_rx_phy { uint32_t ina_cnt; uint32_t fina_cnt; uint32_t plcp_err; uint32_t crc32_err; uint32_t overrun_err; uint32_t early_overrun_err; uint32_t crc32_good; uint32_t false_alarm_cnt; uint32_t fina_sync_err_cnt; uint32_t sfd_timeout; uint32_t fina_timeout; uint32_t unresponded_rts; uint32_t rxe_frame_limit_overrun; uint32_t sent_ack_cnt; uint32_t sent_cts_cnt; uint32_t sent_ba_rsp_cnt; uint32_t dsp_self_kill; uint32_t mh_format_err; uint32_t re_acq_main_rssi_sum; uint32_t reserved; } __packed; /* IWX_STATISTICS_RX_PHY_API_S_VER_2 */ struct iwx_statistics_rx_ht_phy { uint32_t plcp_err; uint32_t overrun_err; uint32_t early_overrun_err; uint32_t crc32_good; uint32_t crc32_err; uint32_t mh_format_err; uint32_t agg_crc32_good; uint32_t agg_mpdu_cnt; uint32_t agg_cnt; uint32_t unsupport_mcs; } __packed; /* IWX_STATISTICS_HT_RX_PHY_API_S_VER_1 */ /* * The first MAC indices (starting from 0) * are available to the driver, AUX follows */ #define IWX_MAC_INDEX_AUX 4 #define IWX_MAC_INDEX_MIN_DRIVER 0 #define IWX_NUM_MAC_INDEX_DRIVER IWX_MAC_INDEX_AUX #define IWX_STATION_COUNT 16 #define IWX_MAX_CHAINS 3 struct iwx_statistics_tx_non_phy_agg { uint32_t ba_timeout; uint32_t ba_reschedule_frames; uint32_t scd_query_agg_frame_cnt; uint32_t scd_query_no_agg; uint32_t scd_query_agg; uint32_t scd_query_mismatch; uint32_t frame_not_ready; uint32_t underrun; uint32_t bt_prio_kill; uint32_t rx_ba_rsp_cnt; int8_t txpower[IWX_MAX_CHAINS]; int8_t reserved; uint32_t reserved2; } __packed; /* IWX_STATISTICS_TX_NON_PHY_AGG_API_S_VER_1 */ struct iwx_statistics_tx_channel_width { uint32_t ext_cca_narrow_ch20[1]; uint32_t ext_cca_narrow_ch40[2]; uint32_t ext_cca_narrow_ch80[3]; uint32_t ext_cca_narrow_ch160[4]; uint32_t last_tx_ch_width_indx; uint32_t rx_detected_per_ch_width[4]; uint32_t success_per_ch_width[4]; uint32_t fail_per_ch_width[4]; }; /* IWX_STATISTICS_TX_CHANNEL_WIDTH_API_S_VER_1 */ struct iwx_statistics_tx { uint32_t preamble_cnt; uint32_t rx_detected_cnt; uint32_t bt_prio_defer_cnt; uint32_t bt_prio_kill_cnt; uint32_t few_bytes_cnt; uint32_t cts_timeout; uint32_t ack_timeout; uint32_t expected_ack_cnt; uint32_t actual_ack_cnt; uint32_t dump_msdu_cnt; uint32_t burst_abort_next_frame_mismatch_cnt; uint32_t burst_abort_missing_next_frame_cnt; uint32_t cts_timeout_collision; uint32_t ack_or_ba_timeout_collision; struct iwx_statistics_tx_non_phy_agg agg; struct iwx_statistics_tx_channel_width channel_width; } __packed; /* IWX_STATISTICS_TX_API_S_VER_4 */ struct iwx_statistics_general { struct iwx_statistics_general_common common; uint32_t beacon_counter[IWX_MAC_INDEX_AUX]; uint8_t beacon_average_energy[IWX_MAC_INDEX_AUX]; uint8_t reserved[8 - IWX_MAC_INDEX_AUX]; } __packed; /* STATISTICS_GENERAL_API_S_VER_10 */ struct iwx_statistics_rx { struct iwx_statistics_rx_phy ofdm; struct iwx_statistics_rx_phy cck; struct iwx_statistics_rx_non_phy general; struct iwx_statistics_rx_ht_phy ofdm_ht; } __packed; /* IWX_STATISTICS_RX_API_S_VER_3 */ /* * IWX_STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) * * By default, uCode issues this notification after receiving a beacon * while associated. To disable this behavior, set DISABLE_NOTIF flag in the * IWX_REPLY_STATISTICS_CMD 0x9c, above. * * Statistics counters continue to increment beacon after beacon, but are * cleared when changing channels or when driver issues IWX_REPLY_STATISTICS_CMD * 0x9c with CLEAR_STATS bit set (see above). * * uCode also issues this notification during scans. uCode clears statistics * appropriately so that each notification contains statistics for only the * one channel that has just been scanned. */ /** * struct iwx_statistics_load - RX statistics for multi-queue devices * @air_time: accumulated air time, per mac * @byte_count: accumulated byte count, per mac * @pkt_count: accumulated packet count, per mac * @avg_energy: average RSSI, per station */ struct iwx_statistics_load { uint32_t air_time[IWX_MAC_INDEX_AUX]; uint32_t byte_count[IWX_MAC_INDEX_AUX]; uint32_t pkt_count[IWX_MAC_INDEX_AUX]; uint8_t avg_energy[IWX_STATION_COUNT]; } __packed; /* STATISTICS_RX_MAC_STATION_S_VER_3 */ struct iwx_notif_statistics { uint32_t flag; struct iwx_statistics_rx rx; struct iwx_statistics_tx tx; struct iwx_statistics_general general; struct iwx_statistics_load load_stats; } __packed; /* STATISTICS_NTFY_API_S_VER_13 */ /** * flags used in statistics notification * @IWX_STATISTICS_REPLY_FLG_CLEAR: statistics were cleared after this report */ #define IWX_STATISTICS_REPLY_FLG_CLEAR 0x01 /** * flags used in statistics command * @IWX_STATISTICS_FLG_CLEAR: request to clear statistics after the report * that's sent after this command * @IWX_STATISTICS_FLG_DISABLE_NOTIF: disable unilateral statistics * notifications */ #define IWX_STATISTICS_FLG_CLEAR 0x01 #define IWX_STATISTICS_FLG_DISABLE_NOTIF 0x02 /** * struct iwx_statistics_cmd - statistics config command * @flags: IWX_STATISTICS_* flags */ struct iwx_statistics_cmd { uint32_t flags; } __packed; /* STATISTICS_CMD_API_S_VER_1 */ /*********************************** * Smart Fifo API ***********************************/ /* Smart Fifo state */ #define IWX_SF_LONG_DELAY_ON 0 /* should never be called by driver */ #define IWX_SF_FULL_ON 1 #define IWX_SF_UNINIT 2 #define IWX_SF_INIT_OFF 3 #define IWX_SF_HW_NUM_STATES 4 /* Smart Fifo possible scenario */ #define IWX_SF_SCENARIO_SINGLE_UNICAST 0 #define IWX_SF_SCENARIO_AGG_UNICAST 1 #define IWX_SF_SCENARIO_MULTICAST 2 #define IWX_SF_SCENARIO_BA_RESP 3 #define IWX_SF_SCENARIO_TX_RESP 4 #define IWX_SF_NUM_SCENARIO 5 #define IWX_SF_TRANSIENT_STATES_NUMBER 2 /* IWX_SF_LONG_DELAY_ON and IWX_SF_FULL_ON */ #define IWX_SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ /* smart FIFO default values */ #define IWX_SF_W_MARK_SISO 4096 #define IWX_SF_W_MARK_MIMO2 8192 #define IWX_SF_W_MARK_MIMO3 6144 #define IWX_SF_W_MARK_LEGACY 4096 #define IWX_SF_W_MARK_SCAN 4096 /* SF Scenarios timers for default configuration (aligned to 32 uSec) */ #define IWX_SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWX_SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWX_SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWX_SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWX_SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */ #define IWX_SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWX_SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWX_SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWX_SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWX_SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */ /* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */ #define IWX_SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define IWX_SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define IWX_SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define IWX_SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define IWX_SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ #define IWX_SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ #define IWX_SF_BA_IDLE_TIMER 320 /* 300 uSec */ #define IWX_SF_BA_AGING_TIMER 2016 /* 2 mSec */ #define IWX_SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ #define IWX_SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ #define IWX_SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ #define IWX_SF_CFG_DUMMY_NOTIF_OFF (1 << 16) /** * Smart Fifo configuration command. * @state: smart fifo state, types listed in enum %iwx_sf_state. * @watermark: Minimum allowed available free space in RXF for transient state. * @long_delay_timeouts: aging and idle timer values for each scenario * in long delay state. * @full_on_timeouts: timer values for each scenario in full on state. */ struct iwx_sf_cfg_cmd { uint32_t state; uint32_t watermark[IWX_SF_TRANSIENT_STATES_NUMBER]; uint32_t long_delay_timeouts[IWX_SF_NUM_SCENARIO][IWX_SF_NUM_TIMEOUT_TYPES]; uint32_t full_on_timeouts[IWX_SF_NUM_SCENARIO][IWX_SF_NUM_TIMEOUT_TYPES]; } __packed; /* IWX_SF_CFG_API_S_VER_2 */ #define IWX_AC_BK 0 #define IWX_AC_BE 1 #define IWX_AC_VI 2 #define IWX_AC_VO 3 #define IWX_AC_NUM 4 /** * MAC context flags * @IWX_MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames, * this will require CCK RTS/CTS2self. * RTS/CTS will protect full burst time. * @IWX_MAC_PROT_FLG_HT_PROT: enable HT protection * @IWX_MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions * @IWX_MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self */ #define IWX_MAC_PROT_FLG_TGG_PROTECT (1 << 3) #define IWX_MAC_PROT_FLG_HT_PROT (1 << 23) #define IWX_MAC_PROT_FLG_FAT_PROT (1 << 24) #define IWX_MAC_PROT_FLG_SELF_CTS_EN (1 << 30) #define IWX_MAC_FLG_SHORT_SLOT (1 << 4) #define IWX_MAC_FLG_SHORT_PREAMBLE (1 << 5) /** * Supported MAC types * @IWX_FW_MAC_TYPE_FIRST: lowest supported MAC type * @IWX_FW_MAC_TYPE_AUX: Auxiliary MAC (internal) * @IWX_FW_MAC_TYPE_LISTENER: monitor MAC type (?) * @IWX_FW_MAC_TYPE_PIBSS: Pseudo-IBSS * @IWX_FW_MAC_TYPE_IBSS: IBSS * @IWX_FW_MAC_TYPE_BSS_STA: BSS (managed) station * @IWX_FW_MAC_TYPE_P2P_DEVICE: P2P Device * @IWX_FW_MAC_TYPE_P2P_STA: P2P client * @IWX_FW_MAC_TYPE_GO: P2P GO * @IWX_FW_MAC_TYPE_TEST: ? * @IWX_FW_MAC_TYPE_MAX: highest support MAC type */ #define IWX_FW_MAC_TYPE_FIRST 1 #define IWX_FW_MAC_TYPE_AUX IWX_FW_MAC_TYPE_FIRST #define IWX_FW_MAC_TYPE_LISTENER 2 #define IWX_FW_MAC_TYPE_PIBSS 3 #define IWX_FW_MAC_TYPE_IBSS 4 #define IWX_FW_MAC_TYPE_BSS_STA 5 #define IWX_FW_MAC_TYPE_P2P_DEVICE 6 #define IWX_FW_MAC_TYPE_P2P_STA 7 #define IWX_FW_MAC_TYPE_GO 8 #define IWX_FW_MAC_TYPE_TEST 9 #define IWX_FW_MAC_TYPE_MAX IWX_FW_MAC_TYPE_TEST /* IWX_MAC_CONTEXT_TYPE_API_E_VER_1 */ /** * TSF hw timer ID * @IWX_TSF_ID_A: use TSF A * @IWX_TSF_ID_B: use TSF B * @IWX_TSF_ID_C: use TSF C * @IWX_TSF_ID_D: use TSF D * @IWX_NUM_TSF_IDS: number of TSF timers available */ #define IWX_TSF_ID_A 0 #define IWX_TSF_ID_B 1 #define IWX_TSF_ID_C 2 #define IWX_TSF_ID_D 3 #define IWX_NUM_TSF_IDS 4 /* IWX_TSF_ID_API_E_VER_1 */ /** * struct iwx_mac_data_ap - configuration data for AP MAC context * @beacon_time: beacon transmit time in system time * @beacon_tsf: beacon transmit time in TSF * @bi: beacon interval in TU * @bi_reciprocal: 2^32 / bi * @dtim_interval: dtim transmit time in TU * @dtim_reciprocal: 2^32 / dtim_interval * @mcast_qid: queue ID for multicast traffic * NOTE: obsolete from VER2 and on * @beacon_template: beacon template ID */ struct iwx_mac_data_ap { uint32_t beacon_time; uint64_t beacon_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t dtim_interval; uint32_t dtim_reciprocal; uint32_t mcast_qid; uint32_t beacon_template; } __packed; /* AP_MAC_DATA_API_S_VER_2 */ /** * struct iwx_mac_data_ibss - configuration data for IBSS MAC context * @beacon_time: beacon transmit time in system time * @beacon_tsf: beacon transmit time in TSF * @bi: beacon interval in TU * @bi_reciprocal: 2^32 / bi * @beacon_template: beacon template ID */ struct iwx_mac_data_ibss { uint32_t beacon_time; uint64_t beacon_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t beacon_template; } __packed; /* IBSS_MAC_DATA_API_S_VER_1 */ /** * struct iwx_mac_data_sta - configuration data for station MAC context * @is_assoc: 1 for associated state, 0 otherwise * @dtim_time: DTIM arrival time in system time * @dtim_tsf: DTIM arrival time in TSF * @bi: beacon interval in TU, applicable only when associated * @bi_reciprocal: 2^32 / bi , applicable only when associated * @dtim_interval: DTIM interval in TU, applicable only when associated * @dtim_reciprocal: 2^32 / dtim_interval , applicable only when associated * @listen_interval: in beacon intervals, applicable only when associated * @assoc_id: unique ID assigned by the AP during association */ struct iwx_mac_data_sta { uint32_t is_assoc; uint32_t dtim_time; uint64_t dtim_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t dtim_interval; uint32_t dtim_reciprocal; uint32_t listen_interval; uint32_t assoc_id; uint32_t assoc_beacon_arrive_time; } __packed; /* IWX_STA_MAC_DATA_API_S_VER_1 */ /** * struct iwx_mac_data_go - configuration data for P2P GO MAC context * @ap: iwx_mac_data_ap struct with most config data * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. * @opp_ps_enabled: indicate that opportunistic PS allowed */ struct iwx_mac_data_go { struct iwx_mac_data_ap ap; uint32_t ctwin; uint32_t opp_ps_enabled; } __packed; /* GO_MAC_DATA_API_S_VER_1 */ /** * struct iwx_mac_data_p2p_sta - configuration data for P2P client MAC context * @sta: iwx_mac_data_sta struct with most config data * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. */ struct iwx_mac_data_p2p_sta { struct iwx_mac_data_sta sta; uint32_t ctwin; } __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */ /** * struct iwx_mac_data_pibss - Pseudo IBSS config data * @stats_interval: interval in TU between statistics notifications to host. */ struct iwx_mac_data_pibss { uint32_t stats_interval; } __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */ /* * struct iwx_mac_data_p2p_dev - configuration data for the P2P Device MAC * context. * @is_disc_extended: if set to true, P2P Device discoverability is enabled on * other channels as well. This should be to true only in case that the * device is discoverable and there is an active GO. Note that setting this * field when not needed, will increase the number of interrupts and have * effect on the platform power, as this setting opens the Rx filters on * all macs. */ struct iwx_mac_data_p2p_dev { uint32_t is_disc_extended; } __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */ /** * MAC context filter flags * @IWX_MAC_FILTER_IN_PROMISC: accept all data frames * @IWX_MAC_FILTER_IN_CONTROL_AND_MGMT: pass all management and * control frames to the host * @IWX_MAC_FILTER_ACCEPT_GRP: accept multicast frames * @IWX_MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames * @IWX_MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames * @IWX_MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host * (in station mode when associated) * @IWX_MAC_FILTER_OUT_BCAST: filter out all broadcast frames * @IWX_MAC_FILTER_IN_CRC32: extract FCS and append it to frames * @IWX_MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host */ #define IWX_MAC_FILTER_IN_PROMISC (1 << 0) #define IWX_MAC_FILTER_IN_CONTROL_AND_MGMT (1 << 1) #define IWX_MAC_FILTER_ACCEPT_GRP (1 << 2) #define IWX_MAC_FILTER_DIS_DECRYPT (1 << 3) #define IWX_MAC_FILTER_DIS_GRP_DECRYPT (1 << 4) #define IWX_MAC_FILTER_IN_BEACON (1 << 6) #define IWX_MAC_FILTER_OUT_BCAST (1 << 8) #define IWX_MAC_FILTER_IN_CRC32 (1 << 11) #define IWX_MAC_FILTER_IN_PROBE_REQUEST (1 << 12) /** * QoS flags * @IWX_MAC_QOS_FLG_UPDATE_EDCA: ? * @IWX_MAC_QOS_FLG_TGN: HT is enabled * @IWX_MAC_QOS_FLG_TXOP_TYPE: ? * */ #define IWX_MAC_QOS_FLG_UPDATE_EDCA (1 << 0) #define IWX_MAC_QOS_FLG_TGN (1 << 1) #define IWX_MAC_QOS_FLG_TXOP_TYPE (1 << 4) /** * struct iwx_ac_qos - QOS timing params for IWX_MAC_CONTEXT_CMD * @cw_min: Contention window, start value in numbers of slots. * Should be a power-of-2, minus 1. Device's default is 0x0f. * @cw_max: Contention window, max value in numbers of slots. * Should be a power-of-2, minus 1. Device's default is 0x3f. * @aifsn: Number of slots in Arbitration Interframe Space (before * performing random backoff timing prior to Tx). Device default 1. * @fifos_mask: FIFOs used by this MAC for this AC * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. * * One instance of this config struct for each of 4 EDCA access categories * in struct iwx_qosparam_cmd. * * Device will automatically increase contention window by (2*CW) + 1 for each * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW * value, to cap the CW value. */ struct iwx_ac_qos { uint16_t cw_min; uint16_t cw_max; uint8_t aifsn; uint8_t fifos_mask; uint16_t edca_txop; } __packed; /* IWX_AC_QOS_API_S_VER_2 */ /** * struct iwx_mac_ctx_cmd - command structure to configure MAC contexts * ( IWX_MAC_CONTEXT_CMD = 0x28 ) * @id_and_color: ID and color of the MAC * @action: action to perform, one of IWX_FW_CTXT_ACTION_* * @mac_type: one of IWX_FW_MAC_TYPE_* * @tsf_id: TSF HW timer, one of IWX_TSF_ID_* * @node_addr: MAC address * @bssid_addr: BSSID * @cck_rates: basic rates available for CCK * @ofdm_rates: basic rates available for OFDM * @protection_flags: combination of IWX_MAC_PROT_FLG_FLAG_* * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise * @short_slot: 0x10 for enabling short slots, 0 otherwise * @filter_flags: combination of IWX_MAC_FILTER_* * @qos_flags: from IWX_MAC_QOS_FLG_* * @ac: one iwx_mac_qos configuration for each AC * @mac_specific: one of struct iwx_mac_data_*, according to mac_type */ struct iwx_mac_ctx_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWX_MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */ uint32_t mac_type; uint32_t tsf_id; uint8_t node_addr[6]; uint16_t reserved_for_node_addr; uint8_t bssid_addr[6]; uint16_t reserved_for_bssid_addr; uint32_t cck_rates; uint32_t ofdm_rates; uint32_t protection_flags; uint32_t cck_short_preamble; uint32_t short_slot; uint32_t filter_flags; /* IWX_MAC_QOS_PARAM_API_S_VER_1 */ uint32_t qos_flags; struct iwx_ac_qos ac[IWX_AC_NUM+1]; /* IWX_MAC_CONTEXT_COMMON_DATA_API_S */ union { struct iwx_mac_data_ap ap; struct iwx_mac_data_go go; struct iwx_mac_data_sta sta; struct iwx_mac_data_p2p_sta p2p_sta; struct iwx_mac_data_p2p_dev p2p_dev; struct iwx_mac_data_pibss pibss; struct iwx_mac_data_ibss ibss; }; } __packed; /* IWX_MAC_CONTEXT_CMD_API_S_VER_1 */ static inline uint32_t iwx_reciprocal(uint32_t v) { if (!v) return 0; return 0xFFFFFFFF / v; } /* Power Management Commands, Responses, Notifications */ /** * masks for LTR config command flags * @IWX_LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status * @IWX_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow * memory access * @IWX_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR * reg change * @IWX_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from * D0 to D3 * @IWX_LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register * @IWX_LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register * @IWX_LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD */ #define IWX_LTR_CFG_FLAG_FEATURE_ENABLE 0x00000001 #define IWX_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS 0x00000002 #define IWX_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH 0x00000004 #define IWX_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 0x00000008 #define IWX_LTR_CFG_FLAG_SW_SET_SHORT 0x00000010 #define IWX_LTR_CFG_FLAG_SW_SET_LONG 0x00000020 #define IWX_LTR_CFG_FLAG_DENIE_C10_ON_PD 0x00000040 #define IWX_LTR_VALID_STATES_NUM 4 /** * struct iwx_ltr_config_cmd - configures the LTR * @flags: See %enum iwx_ltr_config_flags * @static_long: * @static_short: * @ltr_cfg_values: * @ltr_short_idle_timeout: */ struct iwx_ltr_config_cmd { uint32_t flags; uint32_t static_long; uint32_t static_short; uint32_t ltr_cfg_values[IWX_LTR_VALID_STATES_NUM]; uint32_t ltr_short_idle_timeout; } __packed; /* LTR_CAPABLE_API_S_VER_2 */ /* Radio LP RX Energy Threshold measured in dBm */ #define IWX_POWER_LPRX_RSSI_THRESHOLD 75 #define IWX_POWER_LPRX_RSSI_THRESHOLD_MAX 94 #define IWX_POWER_LPRX_RSSI_THRESHOLD_MIN 30 /** * Masks for iwx_mac_power_cmd command flags * @IWX_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off * receiver and transmitter. '0' - does not allow. * @IWX_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, * '1' Driver enables PM (use rest of parameters) * @IWX_POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, * '1' PM could sleep over DTIM till listen Interval. * @IWX_POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all * access categories are both delivery and trigger enabled. * @IWX_POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and * PBW Snoozing enabled * @IWX_POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask * @IWX_POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. * @IWX_POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving * detection enablement */ #define IWX_POWER_FLAGS_POWER_SAVE_ENA_MSK (1 << 0) #define IWX_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK (1 << 1) #define IWX_POWER_FLAGS_SKIP_OVER_DTIM_MSK (1 << 2) #define IWX_POWER_FLAGS_SNOOZE_ENA_MSK (1 << 5) #define IWX_POWER_FLAGS_BT_SCO_ENA (1 << 8) #define IWX_POWER_FLAGS_ADVANCE_PM_ENA_MSK (1 << 9) #define IWX_POWER_FLAGS_LPRX_ENA_MSK (1 << 11) #define IWX_POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK (1 << 12) #define IWX_POWER_VEC_SIZE 5 /** * Masks for device power command flags * @IWX_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK: * '1' Allow to save power by turning off receiver and transmitter. * '0' Do not allow. This flag should be always set to '1' unless * one needs to disable actual power down for debug purposes. * @IWX_DEVICE_POWER_FLAGS_CAM_MSK: * '1' CAM (Continuous Active Mode) is set, power management is disabled. * '0' Power management is enabled, one of the power schemes is applied. */ #define IWX_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK (1 << 0) #define IWX_DEVICE_POWER_FLAGS_CAM_MSK (1 << 13) /** * struct iwx_device_power_cmd - device wide power command. * IWX_POWER_TABLE_CMD = 0x77 (command, has simple generic response) * * @flags: Power table command flags from IWX_DEVICE_POWER_FLAGS_* */ struct iwx_device_power_cmd { /* PM_POWER_TABLE_CMD_API_S_VER_6 */ uint16_t flags; uint16_t reserved; } __packed; /** * struct iwx_mac_power_cmd - New power command containing uAPSD support * IWX_MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) * @id_and_color: MAC context identifier * @flags: Power table command flags from POWER_FLAGS_* * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. * Minimum allowed:- 3 * DTIM. Keep alive period must be * set regardless of power scheme or current power state. * FW use this value also when PM is disabled. * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to * PSM transition - legacy PM * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to * PSM transition - legacy PM * @sleep_interval: not in use * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag * is set. For example, if it is required to skip over * one DTIM, this value need to be set to 2 (DTIM periods). * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to * PSM transition - uAPSD * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to * PSM transition - uAPSD * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set * @snooze_interval: Maximum time between attempts to retrieve buffered data * from the AP [msec] * @snooze_window: A window of time in which PBW snoozing insures that all * packets received. It is also the minimum time from last * received unicast RX packet, before client stops snoozing * for data. [msec] * @snooze_step: TBD * @qndp_tid: TID client shall use for uAPSD QNDP triggers * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for * each corresponding AC. * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct * values. * @heavy_tx_thld_packets: TX threshold measured in number of packets * @heavy_rx_thld_packets: RX threshold measured in number of packets * @heavy_tx_thld_percentage: TX threshold measured in load's percentage * @heavy_rx_thld_percentage: RX threshold measured in load's percentage * @limited_ps_threshold: */ struct iwx_mac_power_cmd { /* CONTEXT_DESC_API_T_VER_1 */ uint32_t id_and_color; /* CLIENT_PM_POWER_TABLE_S_VER_1 */ uint16_t flags; uint16_t keep_alive_seconds; uint32_t rx_data_timeout; uint32_t tx_data_timeout; uint32_t rx_data_timeout_uapsd; uint32_t tx_data_timeout_uapsd; uint8_t lprx_rssi_threshold; uint8_t skip_dtim_periods; uint16_t snooze_interval; uint16_t snooze_window; uint8_t snooze_step; uint8_t qndp_tid; uint8_t uapsd_ac_flags; uint8_t uapsd_max_sp; uint8_t heavy_tx_thld_packets; uint8_t heavy_rx_thld_packets; uint8_t heavy_tx_thld_percentage; uint8_t heavy_rx_thld_percentage; uint8_t limited_ps_threshold; uint8_t reserved; } __packed; #define IWX_DEFAULT_PS_TX_DATA_TIMEOUT (100 * 1000) #define IWX_DEFAULT_PS_RX_DATA_TIMEOUT (100 * 1000) /* * struct iwx_uapsd_misbehaving_ap_notif - FW sends this notification when * associated AP is identified as improperly implementing uAPSD protocol. * IWX_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 * @sta_id: index of station in uCode's station table - associated AP ID in * this context. */ struct iwx_uapsd_misbehaving_ap_notif { uint32_t sta_id; uint8_t mac_id; uint8_t reserved[3]; } __packed; /** * struct iwx_beacon_filter_cmd * IWX_REPLY_BEACON_FILTERING_CMD = 0xd2 (command) * @id_and_color: MAC context identifier * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon * to driver if delta in Energy values calculated for this and last * passed beacon is greater than this threshold. Zero value means that * the Energy change is ignored for beacon filtering, and beacon will * not be forced to be sent to driver regardless of this delta. Typical * energy delta 5dB. * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. * Send beacon to driver if delta in Energy values calculated for this * and last passed beacon is greater than this threshold. Zero value * means that the Energy change is ignored for beacon filtering while in * Roaming state, typical energy delta 1dB. * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values * calculated for current beacon is less than the threshold, use * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature * filtering (Slow or Fast) that is selected (Units are in Celsius): * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used. * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temperature has been changed. * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temperature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_escape_timer: Send beacons to driver if no beacons were passed * for a specific period of time. Units: Beacons. * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed * for a longer period of time then this escape-timeout. Units: Beacons. * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. * @bf_threshold_absolute_low: See below. * @bf_threshold_absolute_high: Send Beacon to driver if Energy value calculated * for this beacon crossed this absolute threshold. For the 'Increase' * direction the bf_energy_absolute_low[i] is used. For the 'Decrease' * direction the bf_energy_absolute_high[i] is used. Zero value means * that this specific threshold is ignored for beacon filtering, and * beacon will not be forced to be sent to driver due to this setting. */ struct iwx_beacon_filter_cmd { uint32_t bf_energy_delta; uint32_t bf_roaming_energy_delta; uint32_t bf_roaming_state; uint32_t bf_temp_threshold; uint32_t bf_temp_fast_filter; uint32_t bf_temp_slow_filter; uint32_t bf_enable_beacon_filter; uint32_t bf_debug_flag; uint32_t bf_escape_timer; uint32_t ba_escape_timer; uint32_t ba_enable_beacon_abort; uint32_t bf_threshold_absolute_low[2]; uint32_t bf_threshold_absolute_high[2]; } __packed; /* BEACON_FILTER_CONFIG_API_S_VER_4 */ /* Beacon filtering and beacon abort */ #define IWX_BF_ENERGY_DELTA_DEFAULT 5 #define IWX_BF_ENERGY_DELTA_MAX 255 #define IWX_BF_ENERGY_DELTA_MIN 0 #define IWX_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 #define IWX_BF_ROAMING_ENERGY_DELTA_MAX 255 #define IWX_BF_ROAMING_ENERGY_DELTA_MIN 0 #define IWX_BF_ROAMING_STATE_DEFAULT 72 #define IWX_BF_ROAMING_STATE_MAX 255 #define IWX_BF_ROAMING_STATE_MIN 0 #define IWX_BF_TEMP_THRESHOLD_DEFAULT 112 #define IWX_BF_TEMP_THRESHOLD_MAX 255 #define IWX_BF_TEMP_THRESHOLD_MIN 0 #define IWX_BF_TEMP_FAST_FILTER_DEFAULT 1 #define IWX_BF_TEMP_FAST_FILTER_MAX 255 #define IWX_BF_TEMP_FAST_FILTER_MIN 0 #define IWX_BF_TEMP_SLOW_FILTER_DEFAULT 5 #define IWX_BF_TEMP_SLOW_FILTER_MAX 255 #define IWX_BF_TEMP_SLOW_FILTER_MIN 0 #define IWX_BF_ENABLE_BEACON_FILTER_DEFAULT 1 #define IWX_BF_DEBUG_FLAG_DEFAULT 0 #define IWX_BF_ESCAPE_TIMER_DEFAULT 50 #define IWX_BF_ESCAPE_TIMER_MAX 1024 #define IWX_BF_ESCAPE_TIMER_MIN 0 #define IWX_BA_ESCAPE_TIMER_DEFAULT 6 #define IWX_BA_ESCAPE_TIMER_D3 9 #define IWX_BA_ESCAPE_TIMER_MAX 1024 #define IWX_BA_ESCAPE_TIMER_MIN 0 #define IWX_BA_ENABLE_BEACON_ABORT_DEFAULT 1 #define IWX_BF_CMD_CONFIG_DEFAULTS \ .bf_energy_delta = htole32(IWX_BF_ENERGY_DELTA_DEFAULT), \ .bf_roaming_energy_delta = \ htole32(IWX_BF_ROAMING_ENERGY_DELTA_DEFAULT), \ .bf_roaming_state = htole32(IWX_BF_ROAMING_STATE_DEFAULT), \ .bf_temp_threshold = htole32(IWX_BF_TEMP_THRESHOLD_DEFAULT), \ .bf_temp_fast_filter = htole32(IWX_BF_TEMP_FAST_FILTER_DEFAULT), \ .bf_temp_slow_filter = htole32(IWX_BF_TEMP_SLOW_FILTER_DEFAULT), \ .bf_debug_flag = htole32(IWX_BF_DEBUG_FLAG_DEFAULT), \ .bf_escape_timer = htole32(IWX_BF_ESCAPE_TIMER_DEFAULT), \ .ba_escape_timer = htole32(IWX_BA_ESCAPE_TIMER_DEFAULT) /* uCode API values for HT/VHT bit rates */ #define IWX_RATE_HT_SISO_MCS_0_PLCP 0 #define IWX_RATE_HT_SISO_MCS_1_PLCP 1 #define IWX_RATE_HT_SISO_MCS_2_PLCP 2 #define IWX_RATE_HT_SISO_MCS_3_PLCP 3 #define IWX_RATE_HT_SISO_MCS_4_PLCP 4 #define IWX_RATE_HT_SISO_MCS_5_PLCP 5 #define IWX_RATE_HT_SISO_MCS_6_PLCP 6 #define IWX_RATE_HT_SISO_MCS_7_PLCP 7 #define IWX_RATE_HT_MIMO2_MCS_8_PLCP 0x8 #define IWX_RATE_HT_MIMO2_MCS_9_PLCP 0x9 #define IWX_RATE_HT_MIMO2_MCS_10_PLCP 0xA #define IWX_RATE_HT_MIMO2_MCS_11_PLCP 0xB #define IWX_RATE_HT_MIMO2_MCS_12_PLCP 0xC #define IWX_RATE_HT_MIMO2_MCS_13_PLCP 0xD #define IWX_RATE_HT_MIMO2_MCS_14_PLCP 0xE #define IWX_RATE_HT_MIMO2_MCS_15_PLCP 0xF #define IWX_RATE_VHT_SISO_MCS_0_PLCP 0 #define IWX_RATE_VHT_SISO_MCS_1_PLCP 1 #define IWX_RATE_VHT_SISO_MCS_2_PLCP 2 #define IWX_RATE_VHT_SISO_MCS_3_PLCP 3 #define IWX_RATE_VHT_SISO_MCS_4_PLCP 4 #define IWX_RATE_VHT_SISO_MCS_5_PLCP 5 #define IWX_RATE_VHT_SISO_MCS_6_PLCP 6 #define IWX_RATE_VHT_SISO_MCS_7_PLCP 7 #define IWX_RATE_VHT_SISO_MCS_8_PLCP 8 #define IWX_RATE_VHT_SISO_MCS_9_PLCP 9 #define IWX_RATE_VHT_MIMO2_MCS_0_PLCP 0x10 #define IWX_RATE_VHT_MIMO2_MCS_1_PLCP 0x11 #define IWX_RATE_VHT_MIMO2_MCS_2_PLCP 0x12 #define IWX_RATE_VHT_MIMO2_MCS_3_PLCP 0x13 #define IWX_RATE_VHT_MIMO2_MCS_4_PLCP 0x14 #define IWX_RATE_VHT_MIMO2_MCS_5_PLCP 0x15 #define IWX_RATE_VHT_MIMO2_MCS_6_PLCP 0x16 #define IWX_RATE_VHT_MIMO2_MCS_7_PLCP 0x17 #define IWX_RATE_VHT_MIMO2_MCS_8_PLCP 0x18 #define IWX_RATE_VHT_MIMO2_MCS_9_PLCP 0x19 #define IWX_RATE_HT_SISO_MCS_INV_PLCP 0x20 #define IWX_RATE_HT_MIMO2_MCS_INV_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP #define IWX_RATE_VHT_SISO_MCS_INV_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP #define IWX_RATE_VHT_MIMO2_MCS_INV_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP #define IWX_RATE_HT_SISO_MCS_8_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP #define IWX_RATE_HT_SISO_MCS_9_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP /* * These serve as indexes into struct iwx_rate iwx_rates[IWX_RIDX_MAX]. */ enum { IWX_RATE_1M_INDEX = 0, IWX_FIRST_CCK_RATE = IWX_RATE_1M_INDEX, IWX_RATE_2M_INDEX, IWX_RATE_5M_INDEX, IWX_RATE_11M_INDEX, IWX_LAST_CCK_RATE = IWX_RATE_11M_INDEX, IWX_RATE_6M_INDEX, IWX_FIRST_OFDM_RATE = IWX_RATE_6M_INDEX, IWX_RATE_MCS_0_INDEX = IWX_RATE_6M_INDEX, IWX_FIRST_HT_RATE = IWX_RATE_MCS_0_INDEX, IWX_FIRST_VHT_RATE = IWX_RATE_MCS_0_INDEX, IWX_RATE_9M_INDEX, IWX_RATE_12M_INDEX, IWX_RATE_MCS_1_INDEX = IWX_RATE_12M_INDEX, IWX_RATE_MCS_8_INDEX, IWX_FIRST_HT_MIMO2_RATE = IWX_RATE_MCS_8_INDEX, IWX_RATE_18M_INDEX, IWX_RATE_MCS_2_INDEX = IWX_RATE_18M_INDEX, IWX_RATE_24M_INDEX, IWX_RATE_MCS_3_INDEX = IWX_RATE_24M_INDEX, IWX_RATE_MCS_9_INDEX, IWX_RATE_36M_INDEX, IWX_RATE_MCS_4_INDEX = IWX_RATE_36M_INDEX, IWX_RATE_MCS_10_INDEX, IWX_RATE_48M_INDEX, IWX_RATE_MCS_5_INDEX = IWX_RATE_48M_INDEX, IWX_RATE_MCS_11_INDEX, IWX_RATE_54M_INDEX, IWX_RATE_MCS_6_INDEX = IWX_RATE_54M_INDEX, IWX_LAST_NON_HT_RATE = IWX_RATE_54M_INDEX, IWX_RATE_MCS_7_INDEX, IWX_LAST_HT_SISO_RATE = IWX_RATE_MCS_7_INDEX, IWX_RATE_MCS_12_INDEX, IWX_RATE_MCS_13_INDEX, IWX_RATE_MCS_14_INDEX, IWX_RATE_MCS_15_INDEX, IWX_LAST_HT_RATE = IWX_RATE_MCS_15_INDEX, IWX_LAST_VHT_RATE = IWX_RATE_MCS_9_INDEX, IWX_RATE_COUNT_LEGACY = IWX_LAST_NON_HT_RATE + 1, IWX_RATE_COUNT = IWX_LAST_HT_RATE + 1, }; #define IWX_RATE_BIT_MSK(r) (1 << (IWX_RATE_##r##M_INDEX)) /* fw API values for legacy bit rates, both OFDM and CCK */ #define IWX_RATE_6M_PLCP 13 #define IWX_RATE_9M_PLCP 15 #define IWX_RATE_12M_PLCP 5 #define IWX_RATE_18M_PLCP 7 #define IWX_RATE_24M_PLCP 9 #define IWX_RATE_36M_PLCP 11 #define IWX_RATE_48M_PLCP 1 #define IWX_RATE_54M_PLCP 3 #define IWX_RATE_1M_PLCP 10 #define IWX_RATE_2M_PLCP 20 #define IWX_RATE_5M_PLCP 55 #define IWX_RATE_11M_PLCP 110 #define IWX_RATE_INVM_PLCP 0xff /* * rate_n_flags bit fields * * The 32-bit value has different layouts in the low 8 bites depending on the * format. There are three formats, HT, VHT and legacy (11abg, with subformats * for CCK and OFDM). * * High-throughput (HT) rate format * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) * Very High-throughput (VHT) rate format * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) * Legacy OFDM rate format for bits 7:0 * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) * Legacy CCK rate format for bits 7:0: * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) */ /* Bit 8: (1) HT format, (0) legacy or VHT format */ #define IWX_RATE_MCS_HT_POS 8 #define IWX_RATE_MCS_HT_MSK (1 << IWX_RATE_MCS_HT_POS) /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ #define IWX_RATE_MCS_CCK_POS 9 #define IWX_RATE_MCS_CCK_MSK (1 << IWX_RATE_MCS_CCK_POS) /* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ #define IWX_RATE_MCS_VHT_POS 26 #define IWX_RATE_MCS_VHT_MSK (1 << IWX_RATE_MCS_VHT_POS) /* * High-throughput (HT) rate format for bits 7:0 * * 2-0: MCS rate base * 0) 6 Mbps * 1) 12 Mbps * 2) 18 Mbps * 3) 24 Mbps * 4) 36 Mbps * 5) 48 Mbps * 6) 54 Mbps * 7) 60 Mbps * 4-3: 0) Single stream (SISO) * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data * (bits 7-6 are zero) * * Together the low 5 bits work out to the MCS index because we don't * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two * streams and 16-23 have three streams. We could also support MCS 32 * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) */ #define IWX_RATE_HT_MCS_RATE_CODE_MSK 0x7 #define IWX_RATE_HT_MCS_NSS_POS 3 #define IWX_RATE_HT_MCS_NSS_MSK (3 << IWX_RATE_HT_MCS_NSS_POS) /* Bit 10: (1) Use Green Field preamble */ #define IWX_RATE_HT_MCS_GF_POS 10 #define IWX_RATE_HT_MCS_GF_MSK (1 << IWX_RATE_HT_MCS_GF_POS) #define IWX_RATE_HT_MCS_INDEX_MSK 0x3f /* * Very High-throughput (VHT) rate format for bits 7:0 * * 3-0: VHT MCS (0-9) * 5-4: number of streams - 1: * 0) Single stream (SISO) * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) */ /* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ #define IWX_RATE_VHT_MCS_RATE_CODE_MSK 0xf #define IWX_RATE_VHT_MCS_NSS_POS 4 #define IWX_RATE_VHT_MCS_NSS_MSK (3 << IWX_RATE_VHT_MCS_NSS_POS) /* * Legacy OFDM rate format for bits 7:0 * * 3-0: 0xD) 6 Mbps * 0xF) 9 Mbps * 0x5) 12 Mbps * 0x7) 18 Mbps * 0x9) 24 Mbps * 0xB) 36 Mbps * 0x1) 48 Mbps * 0x3) 54 Mbps * (bits 7-4 are 0) * * Legacy CCK rate format for bits 7:0: * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): * * 6-0: 10) 1 Mbps * 20) 2 Mbps * 55) 5.5 Mbps * 110) 11 Mbps * (bit 7 is 0) */ #define IWX_RATE_LEGACY_RATE_MSK 0xff /* * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT */ #define IWX_RATE_MCS_CHAN_WIDTH_POS 11 #define IWX_RATE_MCS_CHAN_WIDTH_MSK (3 << IWX_RATE_MCS_CHAN_WIDTH_POS) #define IWX_RATE_MCS_CHAN_WIDTH_20 (0 << IWX_RATE_MCS_CHAN_WIDTH_POS) #define IWX_RATE_MCS_CHAN_WIDTH_40 (1 << IWX_RATE_MCS_CHAN_WIDTH_POS) #define IWX_RATE_MCS_CHAN_WIDTH_80 (2 << IWX_RATE_MCS_CHAN_WIDTH_POS) #define IWX_RATE_MCS_CHAN_WIDTH_160 (3 << IWX_RATE_MCS_CHAN_WIDTH_POS) /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ #define IWX_RATE_MCS_SGI_POS 13 #define IWX_RATE_MCS_SGI_MSK (1 << IWX_RATE_MCS_SGI_POS) /* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ #define IWX_RATE_MCS_ANT_POS 14 #define IWX_RATE_MCS_ANT_A_MSK (1 << IWX_RATE_MCS_ANT_POS) #define IWX_RATE_MCS_ANT_B_MSK (2 << IWX_RATE_MCS_ANT_POS) #define IWX_RATE_MCS_ANT_C_MSK (4 << IWX_RATE_MCS_ANT_POS) #define IWX_RATE_MCS_ANT_AB_MSK (IWX_RATE_MCS_ANT_A_MSK | \ IWX_RATE_MCS_ANT_B_MSK) #define IWX_RATE_MCS_ANT_ABC_MSK (IWX_RATE_MCS_ANT_AB_MSK | \ IWX_RATE_MCS_ANT_C_MSK) #define IWX_RATE_MCS_ANT_MSK IWX_RATE_MCS_ANT_ABC_MSK #define IWX_RATE_MCS_ANT_NUM 3 /* Bit 17-18: (0) SS, (1) SS*2 */ #define IWX_RATE_MCS_STBC_POS 17 #define IWX_RATE_MCS_STBC_MSK (1 << IWX_RATE_MCS_STBC_POS) /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ #define IWX_RATE_MCS_BF_POS 19 #define IWX_RATE_MCS_BF_MSK (1 << IWX_RATE_MCS_BF_POS) /* Bit 20: (0) ZLF is off, (1) ZLF is on */ #define IWX_RATE_MCS_ZLF_POS 20 #define IWX_RATE_MCS_ZLF_MSK (1 << IWX_RATE_MCS_ZLF_POS) /* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ #define IWX_RATE_MCS_DUP_POS 24 #define IWX_RATE_MCS_DUP_MSK (3 << IWX_RATE_MCS_DUP_POS) /* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ #define IWX_RATE_MCS_LDPC_POS 27 #define IWX_RATE_MCS_LDPC_MSK (1 << IWX_RATE_MCS_LDPC_POS) /* Link Quality definitions */ /* # entries in rate scale table to support Tx retries */ #define IWX_LQ_MAX_RETRY_NUM 16 /* Link quality command flags bit fields */ /* Bit 0: (0) Don't use RTS (1) Use RTS */ #define IWX_LQ_FLAG_USE_RTS_POS 0 #define IWX_LQ_FLAG_USE_RTS_MSK (1 << IWX_LQ_FLAG_USE_RTS_POS) /* Bit 1-3: LQ command color. Used to match responses to LQ commands */ #define IWX_LQ_FLAG_COLOR_POS 1 #define IWX_LQ_FLAG_COLOR_MSK (7 << IWX_LQ_FLAG_COLOR_POS) /* Bit 4-5: Tx RTS BW Signalling * (0) No RTS BW signalling * (1) Static BW signalling * (2) Dynamic BW signalling */ #define IWX_LQ_FLAG_RTS_BW_SIG_POS 4 #define IWX_LQ_FLAG_RTS_BW_SIG_NONE (0 << IWX_LQ_FLAG_RTS_BW_SIG_POS) #define IWX_LQ_FLAG_RTS_BW_SIG_STATIC (1 << IWX_LQ_FLAG_RTS_BW_SIG_POS) #define IWX_LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << IWX_LQ_FLAG_RTS_BW_SIG_POS) /* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection * Dynamic BW selection allows Tx with narrower BW then requested in rates */ #define IWX_LQ_FLAG_DYNAMIC_BW_POS 6 #define IWX_LQ_FLAG_DYNAMIC_BW_MSK (1 << IWX_LQ_FLAG_DYNAMIC_BW_POS) /** * Options for TLC config flags * @IWX_TLC_MNG_CFG_FLAGS_STBC_MSK: enable STBC. For HE this enables STBC for * bandwidths <= 80MHz * @IWX_TLC_MNG_CFG_FLAGS_LDPC_MSK: enable LDPC * @IWX_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK: enable STBC in HE at 160MHz * bandwidth * @IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK: enable HE Dual Carrier Modulation * for BPSK (MCS 0) with 1 spatial * stream * @IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK: enable HE Dual Carrier Modulation * for BPSK (MCS 0) with 2 spatial * streams */ #define IWX_TLC_MNG_CFG_FLAGS_STBC_MSK (1 << 0) #define IWX_TLC_MNG_CFG_FLAGS_LDPC_MSK (1 << 1) #define IWX_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK (1 << 2) #define IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK (1 << 3) #define IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK (1 << 4) /** * enum iwx_tlc_mng_cfg_cw - channel width options * @IWX_TLC_MNG_CH_WIDTH_20MHZ: 20MHZ channel * @IWX_TLC_MNG_CH_WIDTH_40MHZ: 40MHZ channel * @IWX_TLC_MNG_CH_WIDTH_80MHZ: 80MHZ channel * @IWX_TLC_MNG_CH_WIDTH_160MHZ: 160MHZ channel * @IWX_TLC_MNG_CH_WIDTH_LAST: maximum value */ enum iwx_tlc_mng_cfg_cw { IWX_TLC_MNG_CH_WIDTH_20MHZ, IWX_TLC_MNG_CH_WIDTH_40MHZ, IWX_TLC_MNG_CH_WIDTH_80MHZ, IWX_TLC_MNG_CH_WIDTH_160MHZ, IWX_TLC_MNG_CH_WIDTH_LAST = IWX_TLC_MNG_CH_WIDTH_160MHZ, }; /** * @IWX_TLC_MNG_CHAIN_A_MSK: chain A * @IWX_TLC_MNG_CHAIN_B_MSK: chain B */ #define IWX_TLC_MNG_CHAIN_A_MSK (1 << 0) #define IWX_TLC_MNG_CHAIN_B_MSK (1 << 1) /** * enum iwx_tlc_mng_cfg_mode - supported modes * @IWX_TLC_MNG_MODE_CCK: enable CCK * @IWX_TLC_MNG_MODE_OFDM_NON_HT: enable OFDM (non HT) * @IWX_TLC_MNG_MODE_NON_HT: enable non HT * @IWX_TLC_MNG_MODE_HT: enable HT * @IWX_TLC_MNG_MODE_VHT: enable VHT * @IWX_TLC_MNG_MODE_HE: enable HE * @IWX_TLC_MNG_MODE_INVALID: invalid value * @IWX_TLC_MNG_MODE_NUM: a count of possible modes */ enum iwx_tlc_mng_cfg_mode { IWX_TLC_MNG_MODE_CCK = 0, IWX_TLC_MNG_MODE_OFDM_NON_HT = IWX_TLC_MNG_MODE_CCK, IWX_TLC_MNG_MODE_NON_HT = IWX_TLC_MNG_MODE_CCK, IWX_TLC_MNG_MODE_HT, IWX_TLC_MNG_MODE_VHT, IWX_TLC_MNG_MODE_HE, IWX_TLC_MNG_MODE_INVALID, IWX_TLC_MNG_MODE_NUM = IWX_TLC_MNG_MODE_INVALID, }; /** * @IWX_TLC_MNG_HT_RATE_MCS0: index of MCS0 * @IWX_TLC_MNG_HT_RATE_MCS1: index of MCS1 * @IWX_TLC_MNG_HT_RATE_MCS2: index of MCS2 * @IWX_TLC_MNG_HT_RATE_MCS3: index of MCS3 * @IWX_TLC_MNG_HT_RATE_MCS4: index of MCS4 * @IWX_TLC_MNG_HT_RATE_MCS5: index of MCS5 * @IWX_TLC_MNG_HT_RATE_MCS6: index of MCS6 * @IWX_TLC_MNG_HT_RATE_MCS7: index of MCS7 * @IWX_TLC_MNG_HT_RATE_MCS8: index of MCS8 * @IWX_TLC_MNG_HT_RATE_MCS9: index of MCS9 * @IWX_TLC_MNG_HT_RATE_MCS10: index of MCS10 * @IWX_TLC_MNG_HT_RATE_MCS11: index of MCS11 * @IWX_TLC_MNG_HT_RATE_MAX: maximal rate for HT/VHT */ enum iwx_tlc_mng_ht_rates { IWX_TLC_MNG_HT_RATE_MCS0 = 0, IWX_TLC_MNG_HT_RATE_MCS1, IWX_TLC_MNG_HT_RATE_MCS2, IWX_TLC_MNG_HT_RATE_MCS3, IWX_TLC_MNG_HT_RATE_MCS4, IWX_TLC_MNG_HT_RATE_MCS5, IWX_TLC_MNG_HT_RATE_MCS6, IWX_TLC_MNG_HT_RATE_MCS7, IWX_TLC_MNG_HT_RATE_MCS8, IWX_TLC_MNG_HT_RATE_MCS9, IWX_TLC_MNG_HT_RATE_MCS10, IWX_TLC_MNG_HT_RATE_MCS11, IWX_TLC_MNG_HT_RATE_MAX = IWX_TLC_MNG_HT_RATE_MCS11, }; #define IWX_TLC_NSS_1 0 #define IWX_TLC_NSS_2 1 #define IWX_TLC_NSS_MAX 2 #define IWX_TLC_HT_BW_NONE_160 0 #define IWX_TLC_HT_BW_160 1 /** * struct iwx_tlc_config_cmd - TLC configuration * @sta_id: station id * @reserved1: reserved * @max_ch_width: max supported channel width from @enum iwx_tlc_mng_cfg_cw * @mode: &enum iwx_tlc_mng_cfg_mode * @chains: bitmask of IWX_TLC_MNG_CHAIN_*_MSK * @amsdu: 1 = TX amsdu is supported, 0 = not supported * @flags: bitmask of IWX_TLC_MNG_CFG_* * @non_ht_rates: bitmap of supported legacy rates * @ht_rates: bitmap of &enum iwx_tlc_mng_ht_rates, per * pair (0 - 80mhz width and below, 1 - 160mhz). * @max_mpdu_len: max MPDU length, in bytes * @sgi_ch_width_supp: bitmap of SGI support per channel width * use (1 << @enum iwx_tlc_mng_cfg_cw) * @reserved2: reserved * @max_tx_op: max TXOP in uSecs for all AC (BK, BE, VO, VI), * set zero for no limit. */ struct iwx_tlc_config_cmd { uint8_t sta_id; uint8_t reserved1[3]; uint8_t max_ch_width; uint8_t mode; uint8_t chains; uint8_t amsdu; uint16_t flags; uint16_t non_ht_rates; uint16_t ht_rates[IWX_TLC_NSS_MAX][2]; uint16_t max_mpdu_len; uint8_t sgi_ch_width_supp; uint8_t reserved2; uint32_t max_tx_op; } __packed; /* TLC_MNG_CONFIG_CMD_API_S_VER_3 */ /** * @IWX_TLC_NOTIF_FLAG_RATE: last initial rate update * @IWX_TLC_NOTIF_FLAG_AMSDU: umsdu parameters update */ #define IWX_TLC_NOTIF_FLAG_RATE (1 << 0) #define IWX_TLC_NOTIF_FLAG_AMSDU (1 << 1) /** * struct iwx_tlc_update_notif - TLC notification from FW * @sta_id: station id * @reserved: reserved * @flags: bitmap of notifications reported * @rate: current initial rate * @amsdu_size: Max AMSDU size, in bytes * @amsdu_enabled: bitmap for per-TID AMSDU enablement */ struct iwx_tlc_update_notif { uint8_t sta_id; uint8_t reserved[3]; uint32_t flags; uint32_t rate; uint32_t amsdu_size; uint32_t amsdu_enabled; } __packed; /* TLC_MNG_UPDATE_NTFY_API_S_VER_2 */ /* Antenna flags. */ #define IWX_ANT_A (1 << 0) #define IWX_ANT_B (1 << 1) #define IWX_ANT_C (1 << 2) /* Shortcuts. */ #define IWX_ANT_AB (IWX_ANT_A | IWX_ANT_B) #define IWX_ANT_BC (IWX_ANT_B | IWX_ANT_C) #define IWX_ANT_ABC (IWX_ANT_A | IWX_ANT_B | IWX_ANT_C) /** * bitmasks for tx_flags in TX command * @IWX_TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame * @IWX_TX_CMD_FLG_ACK: expect ACK from receiving station * @IWX_TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command. * Otherwise, use rate_n_flags from the TX command * @IWX_TX_CMD_FLG_BA: this frame is a block ack * @IWX_TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected * Must set IWX_TX_CMD_FLG_ACK with this flag. * @IWX_TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection * @IWX_TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence * @IWX_TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence * @IWX_TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC) * @IWX_TX_CMD_FLG_BT_DIS: disable BT priority for this frame * @IWX_TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control. * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command * @IWX_TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU * @IWX_TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame * @IWX_TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame * Should be set for beacons and probe responses * @IWX_TX_CMD_FLG_CALIB: activate PA TX power calibrations * @IWX_TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count * @IWX_TX_CMD_FLG_AGG_START: allow this frame to start aggregation * @IWX_TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header. * Should be set for 26/30 length MAC headers * @IWX_TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW * @IWX_TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration * @IWX_TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation * @IWX_TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id * @IWX_TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped * @IWX_TX_CMD_FLG_EXEC_PAPD: execute PAPD * @IWX_TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power * @IWX_TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk */ #define IWX_TX_CMD_FLG_PROT_REQUIRE (1 << 0) #define IWX_TX_CMD_FLG_ACK (1 << 3) #define IWX_TX_CMD_FLG_STA_RATE (1 << 4) #define IWX_TX_CMD_FLG_BA (1 << 5) #define IWX_TX_CMD_FLG_BAR (1 << 6) #define IWX_TX_CMD_FLG_TXOP_PROT (1 << 7) #define IWX_TX_CMD_FLG_VHT_NDPA (1 << 8) #define IWX_TX_CMD_FLG_HT_NDPA (1 << 9) #define IWX_TX_CMD_FLG_CSI_FDBK2HOST (1 << 10) #define IWX_TX_CMD_FLG_BT_DIS (1 << 12) #define IWX_TX_CMD_FLG_SEQ_CTL (1 << 13) #define IWX_TX_CMD_FLG_MORE_FRAG (1 << 14) #define IWX_TX_CMD_FLG_NEXT_FRAME (1 << 15) #define IWX_TX_CMD_FLG_TSF (1 << 16) #define IWX_TX_CMD_FLG_CALIB (1 << 17) #define IWX_TX_CMD_FLG_KEEP_SEQ_CTL (1 << 18) #define IWX_TX_CMD_FLG_AGG_START (1 << 19) #define IWX_TX_CMD_FLG_MH_PAD (1 << 20) #define IWX_TX_CMD_FLG_RESP_TO_DRV (1 << 21) #define IWX_TX_CMD_FLG_CCMP_AGG (1 << 22) #define IWX_TX_CMD_FLG_TKIP_MIC_DONE (1 << 23) #define IWX_TX_CMD_FLG_DUR (1 << 25) #define IWX_TX_CMD_FLG_FW_DROP (1 << 26) #define IWX_TX_CMD_FLG_EXEC_PAPD (1 << 27) #define IWX_TX_CMD_FLG_PAPD_TYPE (1 << 28) #define IWX_TX_CMD_FLG_HCCA_CHUNK (1U << 31) /* IWX_TX_FLAGS_BITS_API_S_VER_1 */ /* * TX command security control */ #define IWX_TX_CMD_SEC_WEP 0x01 #define IWX_TX_CMD_SEC_CCM 0x02 #define IWX_TX_CMD_SEC_TKIP 0x03 #define IWX_TX_CMD_SEC_EXT 0x04 #define IWX_TX_CMD_SEC_MSK 0x07 #define IWX_TX_CMD_SEC_WEP_KEY_IDX_POS 6 #define IWX_TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0 #define IWX_TX_CMD_SEC_KEY128 0x08 /* TODO: how does these values are OK with only 16 bit variable??? */ /* * TX command next frame info * * bits 0:2 - security control (IWX_TX_CMD_SEC_*) * bit 3 - immediate ACK required * bit 4 - rate is taken from STA table * bit 5 - frame belongs to BA stream * bit 6 - immediate BA response expected * bit 7 - unused * bits 8:15 - Station ID * bits 16:31 - rate */ #define IWX_TX_CMD_NEXT_FRAME_ACK_MSK (0x8) #define IWX_TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10) #define IWX_TX_CMD_NEXT_FRAME_BA_MSK (0x20) #define IWX_TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40) #define IWX_TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8) #define IWX_TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00) #define IWX_TX_CMD_NEXT_FRAME_STA_ID_POS (8) #define IWX_TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000) #define IWX_TX_CMD_NEXT_FRAME_RATE_POS (16) /* * TX command Frame life time in us - to be written in pm_frame_timeout */ #define IWX_TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF #define IWX_TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/ #define IWX_TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */ #define IWX_TX_CMD_LIFE_TIME_EXPIRED_FRAME 0 /* * TID for non QoS frames - to be written in tid_tspec */ #define IWX_TID_NON_QOS 0 /* * Limits on the retransmissions - to be written in {data,rts}_retry_limit */ #define IWX_DEFAULT_TX_RETRY 15 #define IWX_MGMT_DFAULT_RETRY_LIMIT 3 #define IWX_RTS_DFAULT_RETRY_LIMIT 3 #define IWX_BAR_DFAULT_RETRY_LIMIT 60 #define IWX_LOW_RETRY_LIMIT 7 /* * The FH will write back to the first TB only, so we need to copy some data * into the buffer regardless of whether it should be mapped or not. * This indicates how big the first TB must be to include the scratch buffer * and the assigned PN. * Since PN location is 8 bytes at offset 12, it's 20 now. * If we make it bigger then allocations will be bigger and copy slower, so * that's probably not useful. */ #define IWX_FIRST_TB_SIZE 20 #define IWX_FIRST_TB_SIZE_ALIGN ((IWX_FIRST_TB_SIZE + (64 - 1)) & ~(64 - 1)) /** * %iwl_tx_cmd offload_assist values * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words) * from mac header end. For normal case it is 4 words for SNAP. * note: tx_cmd, mac header and pad are not counted in the offset. * This is used to help the offload in case there is tunneling such as * IPv6 in IPv4, in such case the ip header offset should point to the * inner ip header and IPv4 checksum of the external header should be * calculated by driver. * @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum * @TX_CMD_OFFLD_L3_EN: enable IP header checksum * @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV * field. Doesn't include the pad. * @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for * alignment * @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU */ #define IWX_TX_CMD_OFFLD_IP_HDR(x) ((x) << 0) #define IWX_TX_CMD_OFFLD_L4_EN (1 << 6) #define IWX_TX_CMD_OFFLD_L3_EN (1 << 7) #define IWX_TX_CMD_OFFLD_MH_SIZE(x) ((x) << 8) #define IWX_TX_CMD_OFFLD_PAD (1 << 13) #define IWX_TX_CMD_OFFLD_AMSDU (1 << 14) #define IWX_TX_CMD_OFFLD_MH_MASK 0x1f #define IWX_TX_CMD_OFFLD_IP_HDR_MASK 0x3f struct iwx_dram_sec_info { uint32_t pn_low; uint16_t pn_high; uint16_t aux_info; } __packed; /* DRAM_SEC_INFO_API_S_VER_1 */ /** * bitmasks for tx_flags in TX command for 22000 * @IWX_TX_FLAGS_CMD_RATE: use rate from the TX command * @IWX_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs * to a secured STA * @IWX_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate * selection, retry limits and BT kill */ #define IWX_TX_FLAGS_CMD_RATE (1 << 0) #define IWX_TX_FLAGS_ENCRYPT_DIS (1 << 1) #define IWX_TX_FLAGS_HIGH_PRI (1 << 2) /* TX_FLAGS_BITS_API_S_VER_3 */ /** * struct iwx_tx_cmd_gen2 - TX command struct to FW for 22000 devices * ( TX_CMD = 0x1c ) * @len: in bytes of the payload, see below for details * @offload_assist: TX offload configuration * @flags: combination of TX_CMD_FLG_* * @dram_info: FW internal DRAM storage * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is * cleared. Combination of RATE_MCS_* * @hdr: 802.11 header */ struct iwx_tx_cmd_gen2 { uint16_t len; uint16_t offload_assist; uint32_t flags; struct iwx_dram_sec_info dram_info; uint32_t rate_n_flags; struct ieee80211_frame hdr[0]; } __packed; /* TX_CMD_API_S_VER_7 */ /* * TX response related data */ /* * status that is returned by the fw after attempts to Tx * @IWX_TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and * STA table * Valid only if frame_count =1 */ #define IWX_TX_STATUS_MSK 0x000000ff #define IWX_TX_STATUS_SUCCESS 0x01 #define IWX_TX_STATUS_DIRECT_DONE 0x02 /* postpone TX */ #define IWX_TX_STATUS_POSTPONE_DELAY 0x40 #define IWX_TX_STATUS_POSTPONE_FEW_BYTES 0x41 #define IWX_TX_STATUS_POSTPONE_BT_PRIO 0x42 #define IWX_TX_STATUS_POSTPONE_QUIET_PERIOD 0x43 #define IWX_TX_STATUS_POSTPONE_CALC_TTAK 0x44 /* abort TX */ #define IWX_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY 0x81 #define IWX_TX_STATUS_FAIL_SHORT_LIMIT 0x82 #define IWX_TX_STATUS_FAIL_LONG_LIMIT 0x83 #define IWX_TX_STATUS_FAIL_UNDERRUN 0x84 #define IWX_TX_STATUS_FAIL_DRAIN_FLOW 0x85 #define IWX_TX_STATUS_FAIL_RFKILL_FLUSH 0x86 #define IWX_TX_STATUS_FAIL_LIFE_EXPIRE 0x87 #define IWX_TX_STATUS_FAIL_DEST_PS 0x88 #define IWX_TX_STATUS_FAIL_HOST_ABORTED 0x89 #define IWX_TX_STATUS_FAIL_BT_RETRY 0x8a #define IWX_TX_STATUS_FAIL_STA_INVALID 0x8b #define IWX_TX_STATUS_FAIL_FRAG_DROPPED 0x8c #define IWX_TX_STATUS_FAIL_TID_DISABLE 0x8d #define IWX_TX_STATUS_FAIL_FIFO_FLUSHED 0x8e #define IWX_TX_STATUS_FAIL_SMALL_CF_POLL 0x8f #define IWX_TX_STATUS_FAIL_FW_DROP 0x90 #define IWX_TX_STATUS_FAIL_STA_COLOR_MISMATCH 0x91 #define IWX_TX_STATUS_INTERNAL_ABORT 0x92 #define IWX_TX_MODE_MSK 0x00000f00 #define IWX_TX_MODE_NO_BURST 0x00000000 #define IWX_TX_MODE_IN_BURST_SEQ 0x00000100 #define IWX_TX_MODE_FIRST_IN_BURST 0x00000200 #define IWX_TX_QUEUE_NUM_MSK 0x0001f000 #define IWX_TX_NARROW_BW_MSK 0x00060000 #define IWX_TX_NARROW_BW_1DIV2 0x00020000 #define IWX_TX_NARROW_BW_1DIV4 0x00040000 #define IWX_TX_NARROW_BW_1DIV8 0x00060000 /* * TX aggregation status * @IWX_AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries * occur if tx failed for this frame when it was a member of a previous * aggregation block). If rate scaling is used, retry count indicates the * rate table entry used for all frames in the new agg. * @IWX_AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for * this frame */ #define IWX_AGG_TX_STATE_STATUS_MSK 0x0fff #define IWX_AGG_TX_STATE_TRANSMITTED 0x0000 #define IWX_AGG_TX_STATE_UNDERRUN 0x0001 #define IWX_AGG_TX_STATE_BT_PRIO 0x0002 #define IWX_AGG_TX_STATE_FEW_BYTES 0x0004 #define IWX_AGG_TX_STATE_ABORT 0x0008 #define IWX_AGG_TX_STATE_LAST_SENT_TTL 0x0010 #define IWX_AGG_TX_STATE_LAST_SENT_TRY_CNT 0x0020 #define IWX_AGG_TX_STATE_LAST_SENT_BT_KILL 0x0040 #define IWX_AGG_TX_STATE_SCD_QUERY 0x0080 #define IWX_AGG_TX_STATE_TEST_BAD_CRC32 0x0100 #define IWX_AGG_TX_STATE_RESPONSE 0x01ff #define IWX_AGG_TX_STATE_DUMP_TX 0x0200 #define IWX_AGG_TX_STATE_DELAY_TX 0x0400 #define IWX_AGG_TX_STATE_TRY_CNT_POS 12 #define IWX_AGG_TX_STATE_TRY_CNT_MSK (0xf << IWX_AGG_TX_STATE_TRY_CNT_POS) #define IWX_AGG_TX_STATE_LAST_SENT_MSK (IWX_AGG_TX_STATE_LAST_SENT_TTL| \ IWX_AGG_TX_STATE_LAST_SENT_TRY_CNT| \ IWX_AGG_TX_STATE_LAST_SENT_BT_KILL) /* * The mask below describes a status where we are absolutely sure that the MPDU * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've * written the bytes to the TXE, but we know nothing about what the DSP did. */ #define IWX_AGG_TX_STAT_FRAME_NOT_SENT (IWX_AGG_TX_STATE_FEW_BYTES | \ IWX_AGG_TX_STATE_ABORT | \ IWX_AGG_TX_STATE_SCD_QUERY) /* * IWX_REPLY_TX = 0x1c (response) * * This response may be in one of two slightly different formats, indicated * by the frame_count field: * * 1) No aggregation (frame_count == 1). This reports Tx results for a single * frame. Multiple attempts, at various bit rates, may have been made for * this frame. * * 2) Aggregation (frame_count > 1). This reports Tx results for two or more * frames that used block-acknowledge. All frames were transmitted at * same rate. Rate scaling may have been used if first frame in this new * agg block failed in previous agg block(s). * * Note that, for aggregation, ACK (block-ack) status is not delivered * here; block-ack has not been received by the time the device records * this status. * This status relates to reasons the tx might have been blocked or aborted * within the device, rather than whether it was received successfully by * the destination station. */ /** * struct iwx_agg_tx_status - per packet TX aggregation status * @status: enum iwx_tx_agg_status * @sequence: Sequence # for this frame's Tx cmd (not SSN!) */ struct iwx_agg_tx_status { uint16_t status; uint16_t sequence; } __packed; /* * definitions for initial rate index field * bits [3:0] initial rate index * bits [6:4] rate table color, used for the initial rate * bit-7 invalid rate indication */ #define IWX_TX_RES_INIT_RATE_INDEX_MSK 0x0f #define IWX_TX_RES_RATE_TABLE_COLOR_MSK 0x70 #define IWX_TX_RES_INV_RATE_INDEX_MSK 0x80 #define IWX_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) #define IWX_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) /** * struct iwx_tx_resp_v3 - notifies that fw is TXing a packet * ( IWX_REPLY_TX = 0x1c ) * @frame_count: 1 no aggregation, >1 aggregation * @bt_kill_count: num of times blocked by bluetooth (unused for agg) * @failure_rts: num of failures due to unsuccessful RTS * @failure_frame: num failures due to no ACK (unused for agg) * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the * Tx of all the batch. IWX_RATE_MCS_* * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. * for agg: RTS + CTS + aggregation tx time + block-ack time. * in usec. * @pa_status: tx power info * @pa_integ_res_a: tx power info * @pa_integ_res_b: tx power info * @pa_integ_res_c: tx power info * @measurement_req_id: tx power info * @tfd_info: TFD information set by the FH * @seq_ctl: sequence control from the Tx cmd * @byte_cnt: byte count from the Tx cmd * @tlc_info: TLC rate info * @ra_tid: bits [3:0] = ra, bits [7:4] = tid * @frame_ctrl: frame control * @status: for non-agg: frame status IWX_TX_STATUS_* * for agg: status of 1st frame, IWX_AGG_TX_STATE_*; other frame status fields * follow this one, up to frame_count. * * After the array of statuses comes the SSN of the SCD. Look at * %iwx_get_scd_ssn for more details. */ struct iwx_tx_resp_v3 { uint8_t frame_count; uint8_t bt_kill_count; uint8_t failure_rts; uint8_t failure_frame; uint32_t initial_rate; uint16_t wireless_media_time; uint8_t pa_status; uint8_t pa_integ_res_a[3]; uint8_t pa_integ_res_b[3]; uint8_t pa_integ_res_c[3]; uint16_t measurement_req_id; uint16_t reserved; uint32_t tfd_info; uint16_t seq_ctl; uint16_t byte_cnt; uint8_t tlc_info; uint8_t ra_tid; uint16_t frame_ctrl; struct iwx_agg_tx_status status; } __packed; /* IWX_TX_RSP_API_S_VER_3 */ /** * struct iwx_tx_resp - notifies that fw is TXing a packet * ( REPLY_TX = 0x1c ) * @frame_count: 1 no aggregation, >1 aggregation * @bt_kill_count: num of times blocked by bluetooth (unused for agg) * @failure_rts: num of failures due to unsuccessful RTS * @failure_frame: num failures due to no ACK (unused for agg) * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the * Tx of all the batch. RATE_MCS_* * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. * for agg: RTS + CTS + aggregation tx time + block-ack time. * in usec. * @pa_status: tx power info * @pa_integ_res_a: tx power info * @pa_integ_res_b: tx power info * @pa_integ_res_c: tx power info * @measurement_req_id: tx power info * @reduced_tpc: transmit power reduction used * @reserved: reserved * @tfd_info: TFD information set by the FH * @seq_ctl: sequence control from the Tx cmd * @byte_cnt: byte count from the Tx cmd * @tlc_info: TLC rate info * @ra_tid: bits [3:0] = ra, bits [7:4] = tid * @frame_ctrl: frame control * @tx_queue: TX queue for this response * @reserved2: reserved for padding/alignment * @status: for non-agg: frame status TX_STATUS_* * For version 6 TX response isn't received for aggregation at all. * * After the array of statuses comes the SSN of the SCD. Look at * %iwl_mvm_get_scd_ssn for more details. */ struct iwx_tx_resp { uint8_t frame_count; uint8_t bt_kill_count; uint8_t failure_rts; uint8_t failure_frame; uint32_t initial_rate; uint16_t wireless_media_time; uint8_t pa_status; uint8_t pa_integ_res_a[3]; uint8_t pa_integ_res_b[3]; uint8_t pa_integ_res_c[3]; uint16_t measurement_req_id; uint8_t reduced_tpc; uint8_t reserved; uint32_t tfd_info; uint16_t seq_ctl; uint16_t byte_cnt; uint8_t tlc_info; uint8_t ra_tid; uint16_t frame_ctrl; uint16_t tx_queue; uint16_t reserved2; struct iwx_agg_tx_status status; } __packed; /* TX_RSP_API_S_VER_6 */ /** * struct iwx_compressed_ba_tfd - progress of a TFD queue * @q_num: TFD queue number * @tfd_index: Index of first un-acked frame in the TFD queue * @scd_queue: For debug only - the physical queue the TFD queue is bound to * @tid: TID of the queue (0-7) * @reserved: reserved for alignment */ struct iwx_compressed_ba_tfd { uint16_t q_num; uint16_t tfd_index; uint8_t scd_queue; uint8_t tid; uint8_t reserved[2]; } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */ /** * struct iwx_compressed_ba_ratid - progress of a RA TID queue * @q_num: RA TID queue number * @tid: TID of the queue * @ssn: BA window current SSN */ struct iwx_compressed_ba_ratid { uint8_t q_num; uint8_t tid; uint16_t ssn; } __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */ /* * enum iwx_ba_resp_flags - TX aggregation status * @IWX_MVM_BA_RESP_TX_AGG: generated due to BA * @IWX_MVM_BA_RESP_TX_BAR: generated due to BA after BAR * @IWX_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA * @IWX_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun * @IWX_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill * @IWX_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the * expected time */ enum iwx_ba_resp_flags { IWX_MVM_BA_RESP_TX_AGG, IWX_MVM_BA_RESP_TX_BAR, IWX_MVM_BA_RESP_TX_AGG_FAIL, IWX_MVM_BA_RESP_TX_UNDERRUN, IWX_MVM_BA_RESP_TX_BT_KILL, IWX_MVM_BA_RESP_TX_DSP_TIMEOUT }; /** * struct iwx_compressed_ba_notif - notifies about reception of BA * ( BA_NOTIF = 0xc5 ) * @flags: status flag, see the &iwx_ba_resp_flags * @sta_id: Index of recipient (BA-sending) station in fw's station table * @reduced_txp: power reduced according to TPC. This is the actual value and * not a copy from the LQ command. Thus, if not the first rate was used * for Tx-ing then this value will be set to 0 by FW. * @tlc_rate_info: TLC rate info, initial rate index, TLC table color * @retry_cnt: retry count * @query_byte_cnt: SCD query byte count * @query_frame_cnt: SCD query frame count * @txed: number of frames sent in the aggregation (all-TIDs) * @done: number of frames that were Acked by the BA (all-TIDs) * @reserved: reserved (for alignment) * @wireless_time: Wireless-media time * @tx_rate: the rate the aggregation was sent at * @tfd_cnt: number of TFD-Q elements * @ra_tid_cnt: number of RATID-Q elements * @tfd: array of TFD queue status updates. See &iwx_compressed_ba_tfd * for details. Length in @tfd_cnt. * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See * &iwx_compressed_ba_ratid for more details. Length in @ra_tid_cnt. */ struct iwx_compressed_ba_notif { uint32_t flags; uint8_t sta_id; uint8_t reduced_txp; uint8_t tlc_rate_info; uint8_t retry_cnt; uint32_t query_byte_cnt; uint16_t query_frame_cnt; uint16_t txed; uint16_t done; uint16_t reserved; uint32_t wireless_time; uint32_t tx_rate; uint16_t tfd_cnt; uint16_t ra_tid_cnt; struct iwx_compressed_ba_ratid ra_tid[0]; struct iwx_compressed_ba_tfd tfd[]; } __packed; /* COMPRESSED_BA_RES_API_S_VER_4 */ struct iwx_beacon_notif { struct iwx_tx_resp_v3 beacon_notify_hdr; uint64_t tsf; uint32_t ibss_mgr_status; } __packed; /** * dump (flush) control flags * @IWX_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty * and the TFD queues are empty. */ #define IWX_DUMP_TX_FIFO_FLUSH (1 << 1) /** * struct iwx_tx_path_flush_cmd -- queue/FIFO flush command * @queues_ctl: bitmap of queues to flush * @flush_ctl: control flags * @reserved: reserved */ struct iwx_tx_path_flush_cmd_v1 { uint32_t queues_ctl; uint16_t flush_ctl; uint16_t reserved; } __packed; /* IWX_TX_PATH_FLUSH_CMD_API_S_VER_1 */ /** * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command * @sta_id: station ID to flush * @tid_mask: TID mask to flush * @reserved: reserved */ struct iwx_tx_path_flush_cmd { uint32_t sta_id; uint16_t tid_mask; uint16_t reserved; } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */ #define IWX_TX_FLUSH_QUEUE_RSP 16 /** * struct iwx_flush_queue_info - virtual flush queue info * @queue_num: virtual queue id * @read_before_flush: read pointer before flush * @read_after_flush: read pointer after flush */ struct iwx_flush_queue_info { uint16_t tid; uint16_t queue_num; uint16_t read_before_flush; uint16_t read_after_flush; } __packed; /* TFDQ_FLUSH_INFO_API_S_VER_1 */ /** * struct iwx_tx_path_flush_cmd_rsp -- queue/FIFO flush command response * @num_flushed_queues: number of queues in queues array * @queues: all flushed queues */ struct iwx_tx_path_flush_cmd_rsp { uint16_t sta_id; uint16_t num_flushed_queues; struct iwx_flush_queue_info queues[IWX_TX_FLUSH_QUEUE_RSP]; } __packed; /* TX_PATH_FLUSH_CMD_RSP_API_S_VER_1 */ /** * iwx_get_scd_ssn - returns the SSN of the SCD * @tx_resp: the Tx response from the fw (agg or non-agg) * * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since * it can't know that everything will go well until the end of the AMPDU, it * can't know in advance the number of MPDUs that will be sent in the current * batch. This is why it writes the agg Tx response while it fetches the MPDUs. * Hence, it can't know in advance what the SSN of the SCD will be at the end * of the batch. This is why the SSN of the SCD is written at the end of the * whole struct at a variable offset. This function knows how to cope with the * variable offset and returns the SSN of the SCD. */ static inline uint32_t iwx_get_scd_ssn(struct iwx_tx_resp *tx_resp) { return le32_to_cpup((uint32_t *)&tx_resp->status + tx_resp->frame_count) & 0xfff; } /** * struct iwx_scd_txq_cfg_cmd - New txq hw scheduler config command * @token: * @sta_id: station id * @tid: * @scd_queue: scheduler queue to config * @enable: 1 queue enable, 0 queue disable * @aggregate: 1 aggregated queue, 0 otherwise * @tx_fifo: %enum iwx_tx_fifo * @window: BA window size * @ssn: SSN for the BA agreement */ struct iwx_scd_txq_cfg_cmd { uint8_t token; uint8_t sta_id; uint8_t tid; uint8_t scd_queue; uint8_t enable; uint8_t aggregate; uint8_t tx_fifo; uint8_t window; uint16_t ssn; uint16_t reserved; } __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */ /** * struct iwx_scd_txq_cfg_rsp * @token: taken from the command * @sta_id: station id from the command * @tid: tid from the command * @scd_queue: scd_queue from the command */ struct iwx_scd_txq_cfg_rsp { uint8_t token; uint8_t sta_id; uint8_t tid; uint8_t scd_queue; } __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */ /* Scan Commands, Responses, Notifications */ /* Max number of IEs for direct SSID scans in a command */ #define IWX_PROBE_OPTION_MAX 20 /** * struct iwx_ssid_ie - directed scan network information element * * Up to 20 of these may appear in IWX_REPLY_SCAN_CMD, * selected by "type" bit field in struct iwx_scan_channel; * each channel may select different ssids from among the 20 entries. * SSID IEs get transmitted in reverse order of entry. */ struct iwx_ssid_ie { uint8_t id; uint8_t len; uint8_t ssid[IEEE80211_NWID_LEN]; } __packed; /* IWX_SCAN_DIRECT_SSID_IE_API_S_VER_1 */ /* scan offload */ #define IWX_SCAN_MAX_BLACKLIST_LEN 64 #define IWX_SCAN_SHORT_BLACKLIST_LEN 16 #define IWX_SCAN_MAX_PROFILES 11 #define IWX_SCAN_OFFLOAD_PROBE_REQ_SIZE 512 /* Default watchdog (in MS) for scheduled scan iteration */ #define IWX_SCHED_SCAN_WATCHDOG cpu_to_le16(15000) #define IWX_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) #define IWX_CAN_ABORT_STATUS 1 #define IWX_FULL_SCAN_MULTIPLIER 5 #define IWX_FAST_SCHED_SCAN_ITERATIONS 3 #define IWX_MAX_SCHED_SCAN_PLANS 2 /** * iwx_scan_schedule_lmac - schedule of scan offload * @delay: delay between iterations, in seconds. * @iterations: num of scan iterations * @full_scan_mul: number of partial scans before each full scan */ struct iwx_scan_schedule_lmac { uint16_t delay; uint8_t iterations; uint8_t full_scan_mul; } __packed; /* SCAN_SCHEDULE_API_S */ /** * iwx_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S * @tx_flags: combination of TX_CMD_FLG_* * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is * cleared. Combination of RATE_MCS_* * @sta_id: index of destination station in FW station table * @reserved: for alignment and future use */ struct iwx_scan_req_tx_cmd { uint32_t tx_flags; uint32_t rate_n_flags; uint8_t sta_id; uint8_t reserved[3]; } __packed; #define IWX_UNIFIED_SCAN_CHANNEL_FULL (1 << 27) #define IWX_UNIFIED_SCAN_CHANNEL_PARTIAL (1 << 28) /** * iwx_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2 * @flags: bits 1-20: directed scan to i'th ssid * other bits &enum iwx_scan_channel_flags_lmac * @channel_number: channel number 1-13 etc * @iter_count: scan iteration on this channel * @iter_interval: interval in seconds between iterations on one channel */ struct iwx_scan_channel_cfg_lmac { uint32_t flags; uint16_t channel_num; uint16_t iter_count; uint32_t iter_interval; } __packed; /* * iwx_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1 * @offset: offset in the data block * @len: length of the segment */ struct iwx_scan_probe_segment { uint16_t offset; uint16_t len; } __packed; /* iwx_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_2 * @mac_header: first (and common) part of the probe * @band_data: band specific data * @common_data: last (and common) part of the probe * @buf: raw data block */ struct iwx_scan_probe_req_v1 { struct iwx_scan_probe_segment mac_header; struct iwx_scan_probe_segment band_data[2]; struct iwx_scan_probe_segment common_data; uint8_t buf[IWX_SCAN_OFFLOAD_PROBE_REQ_SIZE]; } __packed; /* iwl_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_v2 * @mac_header: first (and common) part of the probe * @band_data: band specific data * @common_data: last (and common) part of the probe * @buf: raw data block */ struct iwx_scan_probe_req { struct iwx_scan_probe_segment mac_header; struct iwx_scan_probe_segment band_data[3]; struct iwx_scan_probe_segment common_data; uint8_t buf[IWX_SCAN_OFFLOAD_PROBE_REQ_SIZE]; } __packed; #define IWX_SCAN_CHANNEL_FLAG_EBS (1 << 0) #define IWX_SCAN_CHANNEL_FLAG_EBS_ACCURATE (1 << 1) #define IWX_SCAN_CHANNEL_FLAG_CACHE_ADD (1 << 2) #define IWX_SCAN_CHANNEL_FLAG_EBS_FRAG (1 << 3) #define IWX_SCAN_CHANNEL_FLAG_FORCE_EBS (1 << 4) #define IWX_SCAN_CHANNEL_FLAG_ENABLE_CHAN_ORDER (1 << 5) #define IWX_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER (1 << 6) /* iwx_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S * @flags: enum iwx_scan_channel_flags * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is * involved. * 1 - EBS is disabled. * 2 - every second scan will be full scan(and so on). */ struct iwx_scan_channel_opt { uint16_t flags; uint16_t non_ebs_ratio; } __packed; #define IWX_SCAN_PRIORITY_LOW 0 #define IWX_SCAN_PRIORITY_MEDIUM 1 #define IWX_SCAN_PRIORITY_HIGH 2 enum iwx_scan_priority_ext { IWX_SCAN_PRIORITY_EXT_0_LOWEST, IWX_SCAN_PRIORITY_EXT_1, IWX_SCAN_PRIORITY_EXT_2, IWX_SCAN_PRIORITY_EXT_3, IWX_SCAN_PRIORITY_EXT_4, IWX_SCAN_PRIORITY_EXT_5, IWX_SCAN_PRIORITY_EXT_6, IWX_SCAN_PRIORITY_EXT_7_HIGHEST, }; /** * iwx_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2 * @last_schedule_line: last schedule line executed (fast or regular) * @last_schedule_iteration: last scan iteration executed before scan abort * @status: enum iwx_scan_offload_complete_status * @ebs_status: EBS success status &enum iwx_scan_ebs_status * @time_after_last_iter; time in seconds elapsed after last iteration */ struct iwx_periodic_scan_complete { uint8_t last_schedule_line; uint8_t last_schedule_iteration; uint8_t status; uint8_t ebs_status; uint32_t time_after_last_iter; uint32_t reserved; } __packed; /** * struct iwx_scan_results_notif - scan results for one channel - * SCAN_RESULT_NTF_API_S_VER_3 * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz * @probe_status: IWX_SCAN_PROBE_STATUS_*, indicates success of probe request * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs */ struct iwx_scan_results_notif { uint8_t channel; uint8_t band; uint8_t probe_status; uint8_t num_probe_not_sent; uint32_t duration; } __packed; #define IWX_SCAN_CLIENT_SCHED_SCAN (1 << 0) #define IWX_SCAN_CLIENT_NETDETECT (1 << 1) #define IWX_SCAN_CLIENT_ASSET_TRACKING (1 << 2) /** * iwx_scan_offload_blacklist - IWX_SCAN_OFFLOAD_BLACKLIST_S * @ssid: MAC address to filter out * @reported_rssi: AP rssi reported to the host * @client_bitmap: clients ignore this entry - enum scan_framework_client */ struct iwx_scan_offload_blacklist { uint8_t ssid[ETHER_ADDR_LEN]; uint8_t reported_rssi; uint8_t client_bitmap; } __packed; #define IWX_NETWORK_TYPE_BSS 1 #define IWX_NETWORK_TYPE_IBSS 2 #define IWX_NETWORK_TYPE_ANY 3 #define IWX_SCAN_OFFLOAD_SELECT_2_4 0x4 #define IWX_SCAN_OFFLOAD_SELECT_5_2 0x8 #define IWX_SCAN_OFFLOAD_SELECT_ANY 0xc /** * iwx_scan_offload_profile - IWX_SCAN_OFFLOAD_PROFILE_S * @ssid_index: index to ssid list in fixed part * @unicast_cipher: encryption algorithm to match - bitmap * @aut_alg: authentication algorithm to match - bitmap * @network_type: enum iwx_scan_offload_network_type * @band_selection: enum iwx_scan_offload_band_selection * @client_bitmap: clients waiting for match - enum scan_framework_client */ struct iwx_scan_offload_profile { uint8_t ssid_index; uint8_t unicast_cipher; uint8_t auth_alg; uint8_t network_type; uint8_t band_selection; uint8_t client_bitmap; uint8_t reserved[2]; } __packed; /** * iwx_scan_offload_profile_cfg - IWX_SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 * @blacklist: AP list to filter off from scan results * @profiles: profiles to search for match * @blacklist_len: length of blacklist * @num_profiles: num of profiles in the list * @match_notify: clients waiting for match found notification * @pass_match: clients waiting for the results * @active_clients: active clients bitmap - enum scan_framework_client * @any_beacon_notify: clients waiting for match notification without match */ struct iwx_scan_offload_profile_cfg { struct iwx_scan_offload_profile profiles[IWX_SCAN_MAX_PROFILES]; uint8_t blacklist_len; uint8_t num_profiles; uint8_t match_notify; uint8_t pass_match; uint8_t active_clients; uint8_t any_beacon_notify; uint8_t reserved[2]; } __packed; #define IWX_SCAN_OFFLOAD_COMPLETED 1 #define IWX_SCAN_OFFLOAD_ABORTED 2 /* UMAC Scan API */ #define IWX_SCAN_CONFIG_FLAG_ACTIVATE (1 << 0) #define IWX_SCAN_CONFIG_FLAG_DEACTIVATE (1 << 1) #define IWX_SCAN_CONFIG_FLAG_FORBID_CHUB_REQS (1 << 2) #define IWX_SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS (1 << 3) #define IWX_SCAN_CONFIG_FLAG_SET_TX_CHAINS (1 << 8) #define IWX_SCAN_CONFIG_FLAG_SET_RX_CHAINS (1 << 9) #define IWX_SCAN_CONFIG_FLAG_SET_AUX_STA_ID (1 << 10) #define IWX_SCAN_CONFIG_FLAG_SET_ALL_TIMES (1 << 11) #define IWX_SCAN_CONFIG_FLAG_SET_EFFECTIVE_TIMES (1 << 12) #define IWX_SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS (1 << 13) #define IWX_SCAN_CONFIG_FLAG_SET_LEGACY_RATES (1 << 14) #define IWX_SCAN_CONFIG_FLAG_SET_MAC_ADDR (1 << 15) #define IWX_SCAN_CONFIG_FLAG_SET_FRAGMENTED (1 << 16) #define IWX_SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED (1 << 17) #define IWX_SCAN_CONFIG_FLAG_SET_CAM_MODE (1 << 18) #define IWX_SCAN_CONFIG_FLAG_CLEAR_CAM_MODE (1 << 19) #define IWX_SCAN_CONFIG_FLAG_SET_PROMISC_MODE (1 << 20) #define IWX_SCAN_CONFIG_FLAG_CLEAR_PROMISC_MODE (1 << 21) /* Bits 26-31 are for num of channels in channel_array */ #define IWX_SCAN_CONFIG_N_CHANNELS(n) ((n) << 26) /* OFDM basic rates */ #define IWX_SCAN_CONFIG_RATE_6M (1 << 0) #define IWX_SCAN_CONFIG_RATE_9M (1 << 1) #define IWX_SCAN_CONFIG_RATE_12M (1 << 2) #define IWX_SCAN_CONFIG_RATE_18M (1 << 3) #define IWX_SCAN_CONFIG_RATE_24M (1 << 4) #define IWX_SCAN_CONFIG_RATE_36M (1 << 5) #define IWX_SCAN_CONFIG_RATE_48M (1 << 6) #define IWX_SCAN_CONFIG_RATE_54M (1 << 7) /* CCK basic rates */ #define IWX_SCAN_CONFIG_RATE_1M (1 << 8) #define IWX_SCAN_CONFIG_RATE_2M (1 << 9) #define IWX_SCAN_CONFIG_RATE_5M (1 << 10) #define IWX_SCAN_CONFIG_RATE_11M (1 << 11) /* Bits 16-27 are for supported rates */ #define IWX_SCAN_CONFIG_SUPPORTED_RATE(rate) ((rate) << 16) #define IWX_CHANNEL_FLAG_EBS (1 << 0) #define IWX_CHANNEL_FLAG_ACCURATE_EBS (1 << 1) #define IWX_CHANNEL_FLAG_EBS_ADD (1 << 2) #define IWX_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE (1 << 3) /** * struct iwx_scan_dwell * @active: default dwell time for active scan * @passive: default dwell time for passive scan * @fragmented: default dwell time for fragmented scan * @extended: default dwell time for channels 1, 6 and 11 */ struct iwx_scan_dwell { uint8_t active; uint8_t passive; uint8_t fragmented; uint8_t extended; } __packed; #define IWX_SCAN_TWO_LMACS 2 #define IWX_SCAN_LB_LMAC_IDX 0 /* low-band */ #define IWX_SCAN_HB_LMAC_IDX 1 /* high-band */ /** * struct iwl_scan_config * @enable_cam_mode: whether to enable CAM mode. * @enable_promiscuous_mode: whether to enable promiscuous mode * @bcast_sta_id: the index of the station in the fw. Deprecated starting with * API version 5. * @reserved: reserved * @tx_chains: valid_tx antenna - ANT_* definitions * @rx_chains: valid_rx antenna - ANT_* definitions */ struct iwx_scan_config { uint8_t enable_cam_mode; uint8_t enable_promiscuous_mode; uint8_t bcast_sta_id; uint8_t reserved; uint32_t tx_chains; uint32_t rx_chains; } __packed; /* SCAN_CONFIG_DB_CMD_API_S_5 */ /** * struct iwx_scan_config_v2 * @flags: enum scan_config_flags * @tx_chains: valid_tx antenna - ANT_* definitions * @rx_chains: valid_rx antenna - ANT_* definitions * @legacy_rates: default legacy rates - enum scan_config_rates * @out_of_channel_time: default max out of serving channel time * @suspend_time: default max suspend time * @dwell_active: default dwell time for active scan * @dwell_passive: default dwell time for passive scan * @dwell_fragmented: default dwell time for fragmented scan * @dwell_extended: default dwell time for channels 1, 6 and 11 * @mac_addr: default mac address to be used in probes * @bcast_sta_id: the index of the station in the fw * @channel_flags: default channel flags - enum iwx_channel_flags * scan_config_channel_flag * @channel_array: default supported channels */ struct iwx_scan_config_v2 { uint32_t flags; uint32_t tx_chains; uint32_t rx_chains; uint32_t legacy_rates; uint32_t out_of_channel_time[IWX_SCAN_TWO_LMACS]; uint32_t suspend_time[IWX_SCAN_TWO_LMACS]; struct iwx_scan_dwell dwell; uint8_t mac_addr[ETHER_ADDR_LEN]; uint8_t bcast_sta_id; uint8_t channel_flags; uint8_t channel_array[]; } __packed; /* SCAN_CONFIG_DB_CMD_API_S_2 */ /** * iwx_umac_scan_flags *@IWX_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request * can be preempted by other scan requests with higher priority. * The low priority scan will be resumed when the higher priority scan is * completed. *@IWX_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver * when scan starts. */ #define IWX_UMAC_SCAN_FLAG_PREEMPTIVE (1 << 0) #define IWX_UMAC_SCAN_FLAG_START_NOTIF (1 << 1) #define IWX_UMAC_SCAN_UID_TYPE_OFFSET 0 #define IWX_UMAC_SCAN_UID_SEQ_OFFSET 8 #define IWX_UMAC_SCAN_GEN_FLAGS_PERIODIC (1 << 0) #define IWX_UMAC_SCAN_GEN_FLAGS_OVER_BT (1 << 1) #define IWX_UMAC_SCAN_GEN_FLAGS_PASS_ALL (1 << 2) #define IWX_UMAC_SCAN_GEN_FLAGS_PASSIVE (1 << 3) #define IWX_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT (1 << 4) #define IWX_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE (1 << 5) #define IWX_UMAC_SCAN_GEN_FLAGS_MULTIPLE_SSID (1 << 6) #define IWX_UMAC_SCAN_GEN_FLAGS_FRAGMENTED (1 << 7) #define IWX_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED (1 << 8) #define IWX_UMAC_SCAN_GEN_FLAGS_MATCH (1 << 9) #define IWX_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL (1 << 10) /* Extended dwell is obsolete when adaptive dwell is used, making this * bit reusable. Hence, probe request defer is used only when adaptive * dwell is supported. */ #define IWX_UMAC_SCAN_GEN_FLAGS_PROB_REQ_DEFER_SUPP (1 << 10) #define IWX_UMAC_SCAN_GEN_FLAGS_LMAC2_FRAGMENTED (1 << 11) #define IWX_UMAC_SCAN_GEN_FLAGS_ADAPTIVE_DWELL (1 << 13) #define IWX_UMAC_SCAN_GEN_FLAGS_MAX_CHNL_TIME (1 << 14) #define IWX_UMAC_SCAN_GEN_FLAGS_PROB_REQ_HIGH_TX_RATE (1 << 15) /** * UMAC scan general flags #2 * @IWX_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL: Whether to send a complete * notification per channel or not. * @IWX_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER: Whether to allow channel * reorder optimization or not. */ #define IWX_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL (1 << 0) #define IWX_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER (1 << 1) /** * UMAC scan general flags version 2 * * The FW flags were reordered and hence the driver introduce version 2 * * @IWX_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC: periodic or scheduled * @IWX_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL: pass all probe responses and beacons * during scan iterations * @IWX_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE: send complete notification * on every iteration instead of only once after the last iteration * @IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1: fragmented scan LMAC1 * @IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2: fragmented scan LMAC2 * @IWX_UMAC_SCAN_GEN_FLAGS_V2_MATCH: does this scan check for profile matching * @IWX_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS: use all valid chains for RX * @IWX_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL: works with adaptive dwell * for active channel * @IWX_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE: can be preempted by other requests * @IWX_UMAC_SCAN_GEN_FLAGS_V2_NTF_START: send notification of scan start * @IWX_UMAC_SCAN_GEN_FLAGS_V2_MULTI_SSID: matching on multiple SSIDs * @IWX_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE: all the channels scanned * as passive * @IWX_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN: at the end of 2.4GHz and * 5.2Ghz bands scan, trigger scan on 6GHz band to discover * the reported collocated APs */ #define IWX_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC (1 << 0) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL (1 << 1) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE (1 << 2) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1 (1 << 3) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2 (1 << 4) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_MATCH (1 << 5) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS (1 << 6) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL (1 << 7) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE (1 << 8) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_NTF_START (1 << 9) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_MULTI_SSID (1 << 10) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE (1 << 11) #define IWX_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN (1 << 12) /** * struct iwx_scan_channel_cfg_umac * @flags: bitmap - 0-19: directed scan to i'th ssid. * @channel_num: channel number 1-13 etc. * @iter_count: repetition count for the channel. * @iter_interval: interval between two scan iterations on one channel. */ struct iwx_scan_channel_cfg_umac { uint32_t flags; union { struct { uint8_t channel_num; uint8_t iter_count; uint16_t iter_interval; } v1; /* SCAN_CHANNEL_CFG_S_VER1 */ struct { uint8_t channel_num; uint8_t band; uint8_t iter_count; uint8_t iter_interval; } v2; /* SCAN_CHANNEL_CFG_S_VER{2,3,4} */ }; } __packed; /** * struct iwx_scan_umac_schedule * @interval: interval in seconds between scan iterations * @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop * @reserved: for alignment and future use */ struct iwx_scan_umac_schedule { uint16_t interval; uint8_t iter_count; uint8_t reserved; } __packed; /* SCAN_SCHED_PARAM_API_S_VER_1 */ /** * struct iwx_scan_req_umac_tail - the rest of the UMAC scan request command * parameters following channels configuration array. * @schedule: two scheduling plans. * @delay: delay in TUs before starting the first scan iteration * @reserved: for future use and alignment * @preq: probe request with IEs blocks * @direct_scan: list of SSIDs for directed active scan */ struct iwx_scan_req_umac_tail_v1 { /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */ struct iwx_scan_umac_schedule schedule[IWX_MAX_SCHED_SCAN_PLANS]; uint16_t delay; uint16_t reserved; /* SCAN_PROBE_PARAMS_API_S_VER_1 */ struct iwx_scan_probe_req_v1 preq; struct iwx_ssid_ie direct_scan[IWX_PROBE_OPTION_MAX]; } __packed; /** * struct iwx_scan_req_umac_tail - the rest of the UMAC scan request command * parameters following channels configuration array. * @schedule: two scheduling plans. * @delay: delay in TUs before starting the first scan iteration * @reserved: for future use and alignment * @preq: probe request with IEs blocks * @direct_scan: list of SSIDs for directed active scan */ struct iwx_scan_req_umac_tail_v2 { /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */ struct iwx_scan_umac_schedule schedule[IWX_MAX_SCHED_SCAN_PLANS]; uint16_t delay; uint16_t reserved; /* SCAN_PROBE_PARAMS_API_S_VER_2 */ struct iwx_scan_probe_req preq; struct iwx_ssid_ie direct_scan[IWX_PROBE_OPTION_MAX]; } __packed; /** * struct iwx_scan_umac_chan_param * @flags: channel flags &enum iwl_scan_channel_flags * @count: num of channels in scan request * @reserved: for future use and alignment */ struct iwx_scan_umac_chan_param { uint8_t flags; uint8_t count; uint16_t reserved; } __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_1 */ #define IWX_SCAN_LB_LMAC_IDX 0 #define IWX_SCAN_HB_LMAC_IDX 1 /** * struct iwx_scan_req_umac * @flags: &enum iwl_umac_scan_flags * @uid: scan id, &enum iwl_umac_scan_uid_offsets * @ooc_priority: out of channel priority - &enum iwl_scan_priority * @general_flags: &enum iwl_umac_scan_general_flags * @scan_start_mac_id: report the scan start TSF time according to this mac TSF * @extended_dwell: dwell time for channels 1, 6 and 11 * @active_dwell: dwell time for active scan per LMAC * @passive_dwell: dwell time for passive scan per LMAC * @fragmented_dwell: dwell time for fragmented passive scan * @adwell_default_n_aps: for adaptive dwell the default number of APs * per channel * @adwell_default_n_aps_social: for adaptive dwell the default * number of APs per social (1,6,11) channel * @general_flags2: &enum iwl_umac_scan_general_flags2 * @adwell_max_budget: for adaptive dwell the maximal budget of TU to be added * to total scan time * @max_out_time: max out of serving channel time, per LMAC - for CDB there * are 2 LMACs (high band and low band) * @suspend_time: max suspend time, per LMAC - for CDB there are 2 LMACs * @scan_priority: scan internal prioritization &enum iwl_scan_priority * @num_of_fragments: Number of fragments needed for full coverage per band. * Relevant only for fragmented scan. * @channel: &struct iwx_scan_umac_chan_param * @reserved: for future use and alignment * @reserved3: for future use and alignment * @data: &struct iwx_scan_channel_cfg_umac and * &struct iwx_scan_req_umac_tail */ struct iwx_scan_req_umac { uint32_t flags; uint32_t uid; uint32_t ooc_priority; /* SCAN_GENERAL_PARAMS_API_S_VER_1 */ uint16_t general_flags; uint8_t reserved; uint8_t scan_start_mac_id; union { struct { uint8_t extended_dwell; uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint32_t max_out_time; uint32_t suspend_time; uint32_t scan_priority; struct iwx_scan_umac_chan_param channel; uint8_t data[]; } v1; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_1 */ struct { uint8_t extended_dwell; uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; struct iwx_scan_umac_chan_param channel; uint8_t data[]; } v6; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_6 */ struct { uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint8_t adwell_default_n_aps; uint8_t adwell_default_n_aps_social; uint8_t reserved3; uint16_t adwell_max_budget; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; struct iwx_scan_umac_chan_param channel; uint8_t data[]; } v7; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_7 */ struct { uint8_t active_dwell[2]; uint8_t reserved2; uint8_t adwell_default_n_aps; uint8_t adwell_default_n_aps_social; uint8_t general_flags2; uint16_t adwell_max_budget; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; uint8_t passive_dwell[2]; uint8_t num_of_fragments[2]; struct iwx_scan_umac_chan_param channel; uint8_t data[]; } v8; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_8 */ struct { uint8_t active_dwell[2]; uint8_t adwell_default_hb_n_aps; uint8_t adwell_default_lb_n_aps; uint8_t adwell_default_n_aps_social; uint8_t general_flags2; uint16_t adwell_max_budget; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; uint8_t passive_dwell[2]; uint8_t num_of_fragments[2]; struct iwx_scan_umac_chan_param channel; uint8_t data[]; } v9; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_9 */ }; } __packed; #define IWX_SCAN_REQ_UMAC_SIZE_V8 sizeof(struct iwx_scan_req_umac) #define IWX_SCAN_REQ_UMAC_SIZE_V7 48 #define IWX_SCAN_REQ_UMAC_SIZE_V6 44 #define IWX_SCAN_REQ_UMAC_SIZE_V1 36 /** * struct iwx_scan_general_params_v10 * @flags: &enum iwx_umac_scan_flags * @reserved: reserved for future * @scan_start_mac_id: report the scan start TSF time according to this mac TSF * @active_dwell: dwell time for active scan per LMAC * @adwell_default_2g: adaptive dwell default number of APs * for 2.4GHz channel * @adwell_default_5g: adaptive dwell default number of APs * for 5GHz channels * @adwell_default_social_chn: adaptive dwell default number of * APs per social channel * @reserved1: reserved for future * @adwell_max_budget: the maximal number of TUs that adaptive dwell * can add to the total scan time * @max_out_of_time: max out of serving channel time, per LMAC * @suspend_time: max suspend time, per LMAC * @scan_priority: priority of the request * @passive_dwell: continues dwell time for passive channel * (without adaptive dwell) * @num_of_fragments: number of fragments needed for full fragmented * scan coverage. */ struct iwx_scan_general_params_v10 { uint16_t flags; uint8_t reserved; uint8_t scan_start_mac_id; uint8_t active_dwell[IWX_SCAN_TWO_LMACS]; uint8_t adwell_default_2g; uint8_t adwell_default_5g; uint8_t adwell_default_social_chn; uint8_t reserved1; uint16_t adwell_max_budget; uint32_t max_out_of_time[IWX_SCAN_TWO_LMACS]; uint32_t suspend_time[IWX_SCAN_TWO_LMACS]; uint32_t scan_priority; uint8_t passive_dwell[IWX_SCAN_TWO_LMACS]; uint8_t num_of_fragments[IWX_SCAN_TWO_LMACS]; } __packed; /* SCAN_GENERAL_PARAMS_API_S_VER_10 */ /** * struct iwx_scan_channel_params_v6 * @flags: channel flags &enum iwl_scan_channel_flags * @count: num of channels in scan request * @n_aps_override: override the number of APs the FW uses to calculate dwell * time when adaptive dwell is used. * Channel k will use n_aps_override[i] when BIT(20 + i) is set in * channel_config[k].flags * @channel_config: array of explicit channel configurations * for 2.4Ghz and 5.2Ghz bands */ struct iwx_scan_channel_params_v6 { uint8_t flags; uint8_t count; uint8_t n_aps_override[2]; struct iwx_scan_channel_cfg_umac channel_config[67]; } __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_6 */ /** * struct iwx_scan_periodic_parms_v1 * @schedule: can scheduling parameter * @delay: initial delay of the periodic scan in seconds * @reserved: reserved for future */ struct iwx_scan_periodic_parms_v1 { struct iwx_scan_umac_schedule schedule[IWX_MAX_SCHED_SCAN_PLANS]; uint16_t delay; uint16_t reserved; } __packed; /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */ #define IWX_SCAN_SHORT_SSID_MAX_SIZE 8 #define IWX_SCAN_BSSID_MAX_SIZE 16 /** * struct iwx_scan_probe_params_v4 * @preq: scan probe request params * @short_ssid_num: number of valid short SSIDs in short ssid array * @bssid_num: number of valid bssid in bssids array * @reserved: reserved * @direct_scan: list of ssids * @short_ssid: array of short ssids * @bssid_array: array of bssids */ struct iwx_scan_probe_params_v4 { struct iwx_scan_probe_req preq; uint8_t short_ssid_num; uint8_t bssid_num; uint16_t reserved; struct iwx_ssid_ie direct_scan[IWX_PROBE_OPTION_MAX]; uint32_t short_ssid[IWX_SCAN_SHORT_SSID_MAX_SIZE]; uint8_t bssid_array[IWX_SCAN_BSSID_MAX_SIZE][ETHER_ADDR_LEN]; } __packed; /* SCAN_PROBE_PARAMS_API_S_VER_4 */ /** * struct iwx_scan_req_params_v14 * @general_params: &struct iwx_scan_general_params_v10 * @channel_params: &struct iwx_scan_channel_params_v6 * @periodic_params: &struct iwx_scan_periodic_parms_v1 * @probe_params: &struct iwx_scan_probe_params_v4 */ struct iwx_scan_req_params_v14 { struct iwx_scan_general_params_v10 general_params; struct iwx_scan_channel_params_v6 channel_params; struct iwx_scan_periodic_parms_v1 periodic_params; struct iwx_scan_probe_params_v4 probe_params; } __packed; /* SCAN_REQUEST_PARAMS_API_S_VER_14 */ /** * struct iwx_scan_req_umac_v14 * @uid: scan id, &enum iwl_umac_scan_uid_offsets * @ooc_priority: out of channel priority - &enum iwx_scan_priority * @scan_params: scan parameters */ struct iwx_scan_req_umac_v14 { uint32_t uid; uint32_t ooc_priority; struct iwx_scan_req_params_v14 scan_params; } __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_14 */ /** * struct iwx_umac_scan_abort * @uid: scan id, &enum iwx_umac_scan_uid_offsets * @flags: reserved */ struct iwx_umac_scan_abort { uint32_t uid; uint32_t flags; } __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */ /** * struct iwx_umac_scan_complete * @uid: scan id, &enum iwx_umac_scan_uid_offsets * @last_schedule: last scheduling line * @last_iter: last scan iteration number * @scan status: &enum iwx_scan_offload_complete_status * @ebs_status: &enum iwx_scan_ebs_status * @time_from_last_iter: time elapsed from last iteration * @reserved: for future use */ struct iwx_umac_scan_complete { uint32_t uid; uint8_t last_schedule; uint8_t last_iter; uint8_t status; uint8_t ebs_status; uint32_t time_from_last_iter; uint32_t reserved; } __packed; /* SCAN_COMPLETE_NTF_UMAC_API_S_VER_1 */ #define IWX_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN 5 /** * struct iwx_scan_offload_profile_match - match information * @bssid: matched bssid * @channel: channel where the match occurred * @energy: * @matching_feature: * @matching_channels: bitmap of channels that matched, referencing * the channels passed in tue scan offload request */ struct iwx_scan_offload_profile_match { uint8_t bssid[ETHER_ADDR_LEN]; uint16_t reserved; uint8_t channel; uint8_t energy; uint8_t matching_feature; uint8_t matching_channels[IWX_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN]; } __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_1 */ /** * struct iwx_scan_offload_profiles_query - match results query response * @matched_profiles: bitmap of matched profiles, referencing the * matches passed in the scan offload request * @last_scan_age: age of the last offloaded scan * @n_scans_done: number of offloaded scans done * @gp2_d0u: GP2 when D0U occurred * @gp2_invoked: GP2 when scan offload was invoked * @resume_while_scanning: not used * @self_recovery: obsolete * @reserved: reserved * @matches: array of match information, one for each match */ struct iwx_scan_offload_profiles_query { uint32_t matched_profiles; uint32_t last_scan_age; uint32_t n_scans_done; uint32_t gp2_d0u; uint32_t gp2_invoked; uint8_t resume_while_scanning; uint8_t self_recovery; uint16_t reserved; struct iwx_scan_offload_profile_match matches[IWX_SCAN_MAX_PROFILES]; } __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_2 */ /** * struct iwx_umac_scan_iter_complete_notif - notifies end of scanning iteration * @uid: scan id, &enum iwx_umac_scan_uid_offsets * @scanned_channels: number of channels scanned and number of valid elements in * results array * @status: one of SCAN_COMP_STATUS_* * @bt_status: BT on/off status * @last_channel: last channel that was scanned * @tsf_low: TSF timer (lower half) in usecs * @tsf_high: TSF timer (higher half) in usecs * @results: array of scan results, only "scanned_channels" of them are valid */ struct iwx_umac_scan_iter_complete_notif { uint32_t uid; uint8_t scanned_channels; uint8_t status; uint8_t bt_status; uint8_t last_channel; uint32_t tsf_low; uint32_t tsf_high; struct iwx_scan_results_notif results[]; } __packed; /* SCAN_ITER_COMPLETE_NTF_UMAC_API_S_VER_1 */ #define IWX_GSCAN_START_CMD 0x0 #define IWX_GSCAN_STOP_CMD 0x1 #define IWX_GSCAN_SET_HOTLIST_CMD 0x2 #define IWX_GSCAN_RESET_HOTLIST_CMD 0x3 #define IWX_GSCAN_SET_SIGNIFICANT_CHANGE_CMD 0x4 #define IWX_GSCAN_RESET_SIGNIFICANT_CHANGE_CMD 0x5 #define IWX_GSCAN_SIGNIFICANT_CHANGE_EVENT 0xFD #define IWX_GSCAN_HOTLIST_CHANGE_EVENT 0xFE #define IWX_GSCAN_RESULTS_AVAILABLE_EVENT 0xFF /* STA API */ /** * flags for the ADD_STA host command * @IWX_STA_FLG_REDUCED_TX_PWR_CTRL: * @IWX_STA_FLG_REDUCED_TX_PWR_DATA: * @IWX_STA_FLG_DISABLE_TX: set if TX should be disabled * @IWX_STA_FLG_PS: set if STA is in Power Save * @IWX_STA_FLG_INVALID: set if STA is invalid * @IWX_STA_FLG_DLP_EN: Direct Link Protocol is enabled * @IWX_STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs * @IWX_STA_FLG_DRAIN_FLOW: drain flow * @IWX_STA_FLG_PAN: STA is for PAN interface * @IWX_STA_FLG_CLASS_AUTH: * @IWX_STA_FLG_CLASS_ASSOC: * @IWX_STA_FLG_CLASS_MIMO_PROT: * @IWX_STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU * @IWX_STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation * @IWX_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is * initialised by driver and can be updated by fw upon reception of * action frames that can change the channel width. When cleared the fw * will send all the frames in 20MHz even when FAT channel is requested. * @IWX_STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the * driver and can be updated by fw upon reception of action frames. * @IWX_STA_FLG_MFP_EN: Management Frame Protection */ #define IWX_STA_FLG_REDUCED_TX_PWR_CTRL (1 << 3) #define IWX_STA_FLG_REDUCED_TX_PWR_DATA (1 << 6) #define IWX_STA_FLG_DISABLE_TX (1 << 4) #define IWX_STA_FLG_PS (1 << 8) #define IWX_STA_FLG_DRAIN_FLOW (1 << 12) #define IWX_STA_FLG_PAN (1 << 13) #define IWX_STA_FLG_CLASS_AUTH (1 << 14) #define IWX_STA_FLG_CLASS_ASSOC (1 << 15) #define IWX_STA_FLG_RTS_MIMO_PROT (1 << 17) #define IWX_STA_FLG_MAX_AGG_SIZE_SHIFT 19 #define IWX_STA_FLG_MAX_AGG_SIZE_8K (0 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_16K (1 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_32K (2 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_64K (3 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_128K (4 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_256K (5 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_512K (6 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_1024K (7 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_MAX_AGG_SIZE_MSK (7 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWX_STA_FLG_AGG_MPDU_DENS_SHIFT 23 #define IWX_STA_FLG_AGG_MPDU_DENS_2US (4 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWX_STA_FLG_AGG_MPDU_DENS_4US (5 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWX_STA_FLG_AGG_MPDU_DENS_8US (6 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWX_STA_FLG_AGG_MPDU_DENS_16US (7 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWX_STA_FLG_AGG_MPDU_DENS_MSK (7 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWX_STA_FLG_FAT_EN_20MHZ (0 << 26) #define IWX_STA_FLG_FAT_EN_40MHZ (1 << 26) #define IWX_STA_FLG_FAT_EN_80MHZ (2 << 26) #define IWX_STA_FLG_FAT_EN_160MHZ (3 << 26) #define IWX_STA_FLG_FAT_EN_MSK (3 << 26) #define IWX_STA_FLG_MIMO_EN_SISO (0 << 28) #define IWX_STA_FLG_MIMO_EN_MIMO2 (1 << 28) #define IWX_STA_FLG_MIMO_EN_MIMO3 (2 << 28) #define IWX_STA_FLG_MIMO_EN_MSK (3 << 28) /** * key flags for the ADD_STA host command * @IWX_STA_KEY_FLG_NO_ENC: no encryption * @IWX_STA_KEY_FLG_WEP: WEP encryption algorithm * @IWX_STA_KEY_FLG_CCM: CCMP encryption algorithm * @IWX_STA_KEY_FLG_TKIP: TKIP encryption algorithm * @IWX_STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support) * @IWX_STA_KEY_FLG_CMAC: CMAC encryption algorithm * @IWX_STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm * @IWX_STA_KEY_FLG_EN_MSK: mask for encryption algorithm value * @IWX_STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from * station info array (1 - n 1X mode) * @IWX_STA_KEY_FLG_KEYID_MSK: the index of the key * @IWX_STA_KEY_NOT_VALID: key is invalid * @IWX_STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key * @IWX_STA_KEY_MULTICAST: set for multicast key * @IWX_STA_KEY_MFP: key is used for Management Frame Protection */ #define IWX_STA_KEY_FLG_NO_ENC (0 << 0) #define IWX_STA_KEY_FLG_WEP (1 << 0) #define IWX_STA_KEY_FLG_CCM (2 << 0) #define IWX_STA_KEY_FLG_TKIP (3 << 0) #define IWX_STA_KEY_FLG_EXT (4 << 0) #define IWX_STA_KEY_FLG_CMAC (6 << 0) #define IWX_STA_KEY_FLG_ENC_UNKNOWN (7 << 0) #define IWX_STA_KEY_FLG_EN_MSK (7 << 0) #define IWX_STA_KEY_FLG_WEP_KEY_MAP (1 << 3) #define IWX_STA_KEY_FLG_KEYID_POS 8 #define IWX_STA_KEY_FLG_KEYID_MSK (3 << IWX_STA_KEY_FLG_KEYID_POS) #define IWX_STA_KEY_NOT_VALID (1 << 11) #define IWX_STA_KEY_FLG_WEP_13BYTES (1 << 12) #define IWX_STA_KEY_MULTICAST (1 << 14) #define IWX_STA_KEY_MFP (1 << 15) /** * indicate to the fw what flag are being changed * @IWX_STA_MODIFY_QUEUE_REMOVAL: this command removes a queue * @IWX_STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx * @IWX_STA_MODIFY_TX_RATE: unused * @IWX_STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid * @IWX_STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid * @IWX_STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count * @IWX_STA_MODIFY_PROT_TH: * @IWX_STA_MODIFY_QUEUES: modify the queues used by this station */ #define IWX_STA_MODIFY_QUEUE_REMOVAL (1 << 0) #define IWX_STA_MODIFY_TID_DISABLE_TX (1 << 1) #define IWX_STA_MODIFY_TX_RATE (1 << 2) #define IWX_STA_MODIFY_ADD_BA_TID (1 << 3) #define IWX_STA_MODIFY_REMOVE_BA_TID (1 << 4) #define IWX_STA_MODIFY_SLEEPING_STA_TX_COUNT (1 << 5) #define IWX_STA_MODIFY_PROT_TH (1 << 6) #define IWX_STA_MODIFY_QUEUES (1 << 7) #define IWX_STA_MODE_MODIFY 1 /** * type of sleep of the station * @IWX_STA_SLEEP_STATE_AWAKE: * @IWX_STA_SLEEP_STATE_PS_POLL: * @IWX_STA_SLEEP_STATE_UAPSD: * @IWX_STA_SLEEP_STATE_MOREDATA: set more-data bit on * (last) released frame */ #define IWX_STA_SLEEP_STATE_AWAKE 0 #define IWX_STA_SLEEP_STATE_PS_POLL (1 << 0) #define IWX_STA_SLEEP_STATE_UAPSD (1 << 1) #define IWX_STA_SLEEP_STATE_MOREDATA (1 << 2) /* STA ID and color bits definitions */ #define IWX_STA_ID_SEED (0x0f) #define IWX_STA_ID_POS (0) #define IWX_STA_ID_MSK (IWX_STA_ID_SEED << IWX_STA_ID_POS) #define IWX_STA_COLOR_SEED (0x7) #define IWX_STA_COLOR_POS (4) #define IWX_STA_COLOR_MSK (IWX_STA_COLOR_SEED << IWX_STA_COLOR_POS) #define IWX_STA_ID_N_COLOR_GET_COLOR(id_n_color) \ (((id_n_color) & IWX_STA_COLOR_MSK) >> IWX_STA_COLOR_POS) #define IWX_STA_ID_N_COLOR_GET_ID(id_n_color) \ (((id_n_color) & IWX_STA_ID_MSK) >> IWX_STA_ID_POS) #define IWX_STA_KEY_MAX_NUM (16) #define IWX_STA_KEY_IDX_INVALID (0xff) #define IWX_STA_KEY_MAX_DATA_KEY_NUM (4) #define IWX_MAX_GLOBAL_KEYS (4) #define IWX_STA_KEY_LEN_WEP40 (5) #define IWX_STA_KEY_LEN_WEP104 (13) /** * struct iwx_keyinfo - key information * @key_flags: type %iwx_sta_key_flag * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx * @key_offset: key offset in the fw's key table * @key: 16-byte unicast decryption key * @tx_secur_seq_cnt: initial RSC / PN needed for replay check * @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only * @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only */ struct iwx_keyinfo { uint16_t key_flags; uint8_t tkip_rx_tsc_byte2; uint8_t reserved1; uint16_t tkip_rx_ttak[5]; uint8_t key_offset; uint8_t reserved2; uint8_t key[16]; uint64_t tx_secur_seq_cnt; uint64_t hw_tkip_mic_rx_key; uint64_t hw_tkip_mic_tx_key; } __packed; #define IWX_ADD_STA_STATUS_MASK 0xFF #define IWX_ADD_STA_BAID_VALID_MASK 0x8000 #define IWX_ADD_STA_BAID_MASK 0x7F00 #define IWX_ADD_STA_BAID_SHIFT 8 /** * struct iwx_add_sta_cmd - Add/modify a station in the fw's sta table. * ( REPLY_ADD_STA = 0x18 ) * @add_modify: see &enum iwl_sta_mode * @awake_acs: ACs to transmit data on while station is sleeping (for U-APSD) * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable * AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field. * @mac_id_n_color: the Mac context this station belongs to, * see &enum iwl_ctxt_id_and_color * @addr: station's MAC address * @reserved2: reserved * @sta_id: index of station in uCode's station table * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave * alone. 1 - modify, 0 - don't change. * @reserved3: reserved * @station_flags: look at &enum iwl_sta_flags * @station_flags_msk: what of %station_flags have changed, * also &enum iwl_sta_flags * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) * Set %STA_MODIFY_ADD_BA_TID to use this field, and also set * add_immediate_ba_ssn. * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx) * Set %STA_MODIFY_REMOVE_BA_TID to use this field * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with * add_immediate_ba_tid. * @sleep_tx_count: number of packets to transmit to station even though it is * asleep. Used to synchronise PS-poll and u-APSD responses while ucode * keeps track of STA sleep state. * @station_type: type of this station. See &enum iwl_sta_type. * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag. * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP * mac-addr. * @beamform_flags: beam forming controls * @tfd_queue_msk: tfd queues used by this station. * Obsolete for new TX API (9 and above). * @rx_ba_window: aggregation window size * @sp_length: the size of the SP in actual number of frames * @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver * enabled ACs. * * The device contains an internal table of per-station information, with info * on security keys, aggregation parameters, and Tx rates for initial Tx * attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD). * * ADD_STA sets up the table entry for one station, either creating a new * entry, or modifying a pre-existing one. */ struct iwx_add_sta_cmd { uint8_t add_modify; uint8_t awake_acs; uint16_t tid_disable_tx; uint32_t mac_id_n_color; uint8_t addr[ETHER_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */ uint16_t reserved2; uint8_t sta_id; uint8_t modify_mask; uint16_t reserved3; uint32_t station_flags; uint32_t station_flags_msk; uint8_t add_immediate_ba_tid; uint8_t remove_immediate_ba_tid; uint16_t add_immediate_ba_ssn; uint16_t sleep_tx_count; uint8_t sleep_state_flags; uint8_t station_type; uint16_t assoc_id; uint16_t beamform_flags; uint32_t tfd_queue_msk; uint16_t rx_ba_window; uint8_t sp_length; uint8_t uapsd_acs; } __packed; /* ADD_STA_CMD_API_S_VER_10 */ /** * FW station types * ( REPLY_ADD_STA = 0x18 ) * @IWX_STA_LINK: Link station - normal RX and TX traffic. * @IWX_STA_GENERAL_PURPOSE: General purpose. In AP mode used for beacons * and probe responses. * @IWX_STA_MULTICAST: multicast traffic, * @IWX_STA_TDLS_LINK: TDLS link station * @IWX_STA_AUX_ACTIVITY: auxiliary station (scan, ROC and so on). */ #define IWX_STA_LINK 0 #define IWX_STA_GENERAL_PURPOSE 1 #define IWX_STA_MULTICAST 2 #define IWX_STA_TDLS_LINK 3 #define IWX_STA_AUX_ACTIVITY 4 /** * struct iwx_add_sta_key_common - add/modify sta key common part * ( REPLY_ADD_STA_KEY = 0x17 ) * @sta_id: index of station in uCode's station table * @key_offset: key offset in key storage * @key_flags: IWX_STA_KEY_FLG_* * @key: key material data * @rx_secur_seq_cnt: RX security sequence counter for the key */ struct iwx_add_sta_key_common { uint8_t sta_id; uint8_t key_offset; uint16_t key_flags; uint8_t key[32]; uint8_t rx_secur_seq_cnt[16]; } __packed; /** * struct iwx_add_sta_key_cmd_v1 - add/modify sta key * @common: see &struct iwx_add_sta_key_common * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @reserved: reserved * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx */ struct iwx_add_sta_key_cmd_v1 { struct iwx_add_sta_key_common common; uint8_t tkip_rx_tsc_byte2; uint8_t reserved; uint16_t tkip_rx_ttak[5]; } __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_1 */ /** * struct iwx_add_sta_key_cmd - add/modify sta key * @common: see &struct iwx_add_sta_key_common * @rx_mic_key: TKIP RX unicast or multicast key * @tx_mic_key: TKIP TX key * @transmit_seq_cnt: TSC, transmit packet number */ struct iwx_add_sta_key_cmd { struct iwx_add_sta_key_common common; uint64_t rx_mic_key; uint64_t tx_mic_key; uint64_t transmit_seq_cnt; } __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_2 */ /** * status in the response to ADD_STA command * @IWX_ADD_STA_SUCCESS: operation was executed successfully * @IWX_ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table * @IWX_ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session * @IWX_ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station * that doesn't exist. */ #define IWX_ADD_STA_SUCCESS 0x1 #define IWX_ADD_STA_STATIONS_OVERLOAD 0x2 #define IWX_ADD_STA_IMMEDIATE_BA_FAILURE 0x4 #define IWX_ADD_STA_MODIFY_NON_EXISTING_STA 0x8 /** * struct iwx_rm_sta_cmd - Add / modify a station in the fw's station table * ( IWX_REMOVE_STA = 0x19 ) * @sta_id: the station id of the station to be removed */ struct iwx_rm_sta_cmd { uint8_t sta_id; uint8_t reserved[3]; } __packed; /* IWX_REMOVE_STA_CMD_API_S_VER_2 */ /** * struct iwx_mgmt_mcast_key_cmd * ( IWX_MGMT_MCAST_KEY = 0x1f ) * @ctrl_flags: %iwx_sta_key_flag * @IGTK: * @K1: IGTK master key * @K2: IGTK sub key * @sta_id: station ID that support IGTK * @key_id: * @receive_seq_cnt: initial RSC/PN needed for replay check */ struct iwx_mgmt_mcast_key_cmd { uint32_t ctrl_flags; uint8_t IGTK[16]; uint8_t K1[16]; uint8_t K2[16]; uint32_t key_id; uint32_t sta_id; uint64_t receive_seq_cnt; } __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */ struct iwx_wep_key { uint8_t key_index; uint8_t key_offset; uint16_t reserved1; uint8_t key_size; uint8_t reserved2[3]; uint8_t key[16]; } __packed; struct iwx_wep_key_cmd { uint32_t mac_id_n_color; uint8_t num_keys; uint8_t decryption_type; uint8_t flags; uint8_t reserved; struct iwx_wep_key wep_key[0]; } __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */ /* * BT coex */ #define IWX_BT_COEX_DISABLE 0x0 #define IWX_BT_COEX_NW 0x1 #define IWX_BT_COEX_BT 0x2 #define IWX_BT_COEX_WIFI 0x3 /* BT_COEX_MODES_E */ #define IWX_BT_COEX_MPLUT_ENABLED (1 << 0) #define IWX_BT_COEX_MPLUT_BOOST_ENABLED (1 << 1) #define IWX_BT_COEX_SYNC2SCO_ENABLED (1 << 2) #define IWX_BT_COEX_CORUN_ENABLED (1 << 3) #define IWX_BT_COEX_HIGH_BAND_RET (1 << 4) /* BT_COEX_MODULES_ENABLE_E_VER_1 */ /** * struct iwx_bt_coex_cmd - bt coex configuration command * @mode: enum %iwx_bt_coex_mode * @enabled_modules: enum %iwx_bt_coex_enabled_modules * * The structure is used for the BT_COEX command. */ struct iwx_bt_coex_cmd { uint32_t mode; uint32_t enabled_modules; } __packed; /* BT_COEX_CMD_API_S_VER_6 */ /* * Location Aware Regulatory (LAR) API - MCC updates */ /** * struct iwx_mcc_update_cmd - Request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: the source from where we got the MCC, see IWX_MCC_SOURCE_* * @reserved: reserved for alignment * @key: integrity key for MCC API OEM testing * @reserved2: reserved */ struct iwx_mcc_update_cmd { uint16_t mcc; uint8_t source_id; uint8_t reserved; uint32_t key; uint32_t reserved2[5]; } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ /** * iwx_mcc_update_resp_v3 - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwx_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @source_id: the MCC source, see IWX_MCC_SOURCE_* * @time: time elapsed from the MCC test start (in 30 seconds TU) * @reserved: reserved. * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 * channels, depending on platform) * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwx_mcc_update_resp_v3 { uint32_t status; uint16_t mcc; uint8_t cap; uint8_t source_id; uint16_t time; uint16_t geo_info; uint32_t n_channels; uint32_t channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */ /** * geographic information. * @GEO_NO_INFO: no special info for this geo profile. * @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params * for the 5 GHz band. */ #define IWX_GEO_NO_INFO 0 #define IWX_GEO_WMM_ETSI_5GHZ_INFO (1 << 0) /** * struct iwx_mcc_update_resp - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwl_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @time: time elapsed from the MCC test start (in units of 30 seconds) * @geo_info: geographic specific profile information * see IWX_GEO_* * @source_id: the MCC source, see IWX_MCC_SOURCE_* * @reserved: for four bytes alignment. * @n_channels: number of channels in @channels_data. * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwx_mcc_update_resp { uint32_t status; uint16_t mcc; uint16_t cap; uint16_t time; uint16_t geo_info; uint8_t source_id; uint8_t reserved[3]; uint32_t n_channels; uint32_t channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */ /** * struct iwx_mcc_chub_notif - chub notifies of mcc change * (MCC_CHUB_UPDATE_CMD = 0xc9) * The Chub (Communication Hub, CommsHUB) is a HW component that connects to * the cellular and connectivity cores that gets updates of the mcc, and * notifies the ucode directly of any mcc change. * The ucode requests the driver to request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: identity of the change originator, see IWX_MCC_SOURCE_* * @reserved1: reserved for alignment */ struct iwx_mcc_chub_notif { uint16_t mcc; uint8_t source_id; uint8_t reserved1; } __packed; /* LAR_MCC_NOTIFY_S */ enum iwx_mcc_update_status { IWX_MCC_RESP_NEW_CHAN_PROFILE, IWX_MCC_RESP_SAME_CHAN_PROFILE, IWX_MCC_RESP_INVALID, IWX_MCC_RESP_NVM_DISABLED, IWX_MCC_RESP_ILLEGAL, IWX_MCC_RESP_LOW_PRIORITY, IWX_MCC_RESP_TEST_MODE_ACTIVE, IWX_MCC_RESP_TEST_MODE_NOT_ACTIVE, IWX_MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE, }; #define IWX_MCC_SOURCE_OLD_FW 0 #define IWX_MCC_SOURCE_ME 1 #define IWX_MCC_SOURCE_BIOS 2 #define IWX_MCC_SOURCE_3G_LTE_HOST 3 #define IWX_MCC_SOURCE_3G_LTE_DEVICE 4 #define IWX_MCC_SOURCE_WIFI 5 #define IWX_MCC_SOURCE_RESERVED 6 #define IWX_MCC_SOURCE_DEFAULT 7 #define IWX_MCC_SOURCE_UNINITIALIZED 8 #define IWX_MCC_SOURCE_MCC_API 9 #define IWX_MCC_SOURCE_GET_CURRENT 0x10 #define IWX_MCC_SOURCE_GETTING_MCC_TEST_MODE 0x11 /* * From Linux commit ab02165ccec4c78162501acedeef1a768acdb811: * As the firmware is slowly running out of command IDs and grouping of * commands is desirable anyway, the firmware is extending the command * header from 4 bytes to 8 bytes to introduce a group (in place of the * former flags field, since that's always 0 on commands and thus can * be easily used to distinguish between the two). * * These functions retrieve specific information from the id field in * the iwx_host_cmd struct which contains the command id, the group id, * and the version of the command. */ static inline uint8_t iwx_cmd_opcode(uint32_t cmdid) { return cmdid & 0xff; } static inline uint8_t iwx_cmd_groupid(uint32_t cmdid) { return ((cmdid & 0Xff00) >> 8); } static inline uint8_t iwx_cmd_version(uint32_t cmdid) { return ((cmdid & 0xff0000) >> 16); } static inline uint32_t iwx_cmd_id(uint8_t opcode, uint8_t groupid, uint8_t version) { return opcode + (groupid << 8) + (version << 16); } /* make uint16_t wide id out of uint8_t group and opcode */ #define IWX_WIDE_ID(grp, opcode) ((grp << 8) | opcode) struct iwx_cmd_header { uint8_t code; uint8_t flags; uint8_t idx; uint8_t qid; } __packed; struct iwx_cmd_header_wide { uint8_t opcode; uint8_t group_id; uint8_t idx; uint8_t qid; uint16_t length; uint8_t reserved; uint8_t version; } __packed; #define IWX_POWER_SCHEME_CAM 1 #define IWX_POWER_SCHEME_BPS 2 #define IWX_POWER_SCHEME_LP 3 #define IWX_DEF_CMD_PAYLOAD_SIZE 320 #define IWX_MAX_CMD_PAYLOAD_SIZE (4096 - sizeof(struct iwx_cmd_header_wide)) #define IWX_CMD_FAILED_MSK 0x40 /** * struct iwx_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for commands that * aren't fully copied and use other TFD space. */ struct iwx_device_cmd { union { struct { struct iwx_cmd_header hdr; uint8_t data[IWX_DEF_CMD_PAYLOAD_SIZE]; }; struct { struct iwx_cmd_header_wide hdr_wide; uint8_t data_wide[IWX_DEF_CMD_PAYLOAD_SIZE - sizeof(struct iwx_cmd_header_wide) + sizeof(struct iwx_cmd_header)]; }; }; } __packed; struct iwx_rx_packet { /* * The first 4 bytes of the RX frame header contain both the RX frame * size and some flags. * Bit fields: * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request * 28-26: Reserved * 25: Offload enabled * 24: RPF enabled * 23: RSS enabled * 22: Checksum enabled * 21-16: RX queue * 15-14: Reserved * 13-00: RX frame size */ uint32_t len_n_flags; struct iwx_cmd_header hdr; uint8_t data[]; } __packed; #define IWX_FH_RSCSR_FRAME_SIZE_MSK 0x00003fff #define IWX_FH_RSCSR_FRAME_INVALID 0x55550000 #define IWX_FH_RSCSR_FRAME_ALIGN 0x40 #define IWX_FH_RSCSR_RPA_EN (1 << 25) #define IWX_FH_RSCSR_RADA_EN (1 << 26) #define IWX_FH_RSCSR_RXQ_POS 16 #define IWX_FH_RSCSR_RXQ_MASK 0x3F0000 static uint32_t iwx_rx_packet_len(const struct iwx_rx_packet *pkt) { return le32toh(pkt->len_n_flags) & IWX_FH_RSCSR_FRAME_SIZE_MSK; } static uint32_t iwx_rx_packet_payload_len(const struct iwx_rx_packet *pkt) { return iwx_rx_packet_len(pkt) - sizeof(pkt->hdr); } #define IWX_MIN_DBM -100 #define IWX_MAX_DBM -33 /* realistic guess */ #define IWX_READ(sc, reg) \ bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg)) #define IWX_WRITE(sc, reg, val) \ bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define IWX_WRITE_1(sc, reg, val) \ bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define IWX_SETBITS(sc, reg, mask) \ IWX_WRITE(sc, reg, IWX_READ(sc, reg) | (mask)) #define IWX_CLRBITS(sc, reg, mask) \ IWX_WRITE(sc, reg, IWX_READ(sc, reg) & ~(mask)) #define IWX_BARRIER_WRITE(sc) \ bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \ BUS_SPACE_BARRIER_WRITE) #define IWX_BARRIER_READ_WRITE(sc) \ bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \ BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE)