/* $OpenBSD: if_ix.h,v 1.11 2010/08/27 08:24:53 deraadt Exp $ */ /****************************************************************************** Copyright (c) 2001-2008, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************/ /*$FreeBSD: src/sys/dev/ixgbe/ixgbe.h,v 1.4 2008/05/16 18:46:30 jfv Exp $*/ #ifndef _IX_H_ #define _IX_H_ #include #if 0 #include "tcp_lro.h" #endif /* Tunables */ /* * TxDescriptors Valid Range: 64-4096 Default Value: 256 This value is the * number of transmit descriptors allocated by the driver. Increasing this * value allows the driver to queue more transmits. Each descriptor is 16 * bytes. Performance tests have show the 2K value to be optimal for top * performance. */ #define DEFAULT_TXD 256 #define PERFORM_TXD 2048 #define MAX_TXD 4096 #define MIN_TXD 64 /* * RxDescriptors Valid Range: 64-4096 Default Value: 256 This value is the * number of receive descriptors allocated for each RX queue. Increasing this * value allows the driver to buffer more incoming packets. Each descriptor * is 16 bytes. A receive buffer is also allocated for each descriptor. * * Note: with 8 rings and a dual port card, it is possible to bump up * against the system mbuf pool limit, you can tune nmbclusters * to adjust for this. */ #define DEFAULT_RXD 256 #define PERFORM_RXD 2048 #define MAX_RXD 4096 #define MIN_RXD 64 /* Alignment for rings */ #define DBA_ALIGN 128 /* * This parameter controls the maximum no of times the driver will loop in * the isr. Minimum Value = 1 */ #define MAX_INTR 10 /* * This parameter controls the duration of transmit watchdog timer. */ #define IXGBE_TX_TIMEOUT 5 /* set to 5 seconds */ /* * This parameters control when the driver calls the routine to reclaim * transmit descriptors. */ #define IXGBE_TX_CLEANUP_THRESHOLD (sc->num_tx_desc / 8) #define IXGBE_TX_OP_THRESHOLD (sc->num_tx_desc / 32) #define IXGBE_MAX_FRAME_SIZE 0x3F00 /* Flow control constants */ #define IXGBE_FC_PAUSE 0x680 #define IXGBE_FC_HI 0x20000 #define IXGBE_FC_LO 0x10000 /* Defines for printing debug information */ #define DEBUG_INIT 0 #define DEBUG_IOCTL 0 #define DEBUG_HW 0 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) #define MAX_NUM_MULTICAST_ADDRESSES 128 #define IXGBE_82598_SCATTER 100 #define IXGBE_82599_SCATTER 32 #define IXGBE_MSIX_BAR 3 #if 0 #define IXGBE_TSO_SIZE 65535 #else #define IXGBE_TSO_SIZE IXGBE_MAX_FRAME_SIZE #endif #define IXGBE_TX_BUFFER_SIZE ((uint32_t) 1514) #define IXGBE_RX_HDR_SIZE ((uint32_t) 256) #define CSUM_OFFLOAD 7 /* Bits in csum flags */ /* The number of MSIX messages the 82598 supports */ #define IXGBE_MSGS 18 /* For 6.X code compatibility */ #if __FreeBSD_version < 700000 #define ETHER_BPF_MTAP BPF_MTAP #define CSUM_TSO 0 #define IFCAP_TSO4 0 #define FILTER_STRAY #define FILTER_HANDLED #endif /* * Interrupt Moderation parameters * for now we hardcode, later * it would be nice to do dynamic */ #define MAX_IRQ_SEC 8000 #define DEFAULT_ITR 1000000000/(MAX_IRQ_SEC * 256) #define LINK_ITR 1000000000/(1950 * 256) /* Used for auto RX queue configuration */ extern int mp_ncpus; struct ixgbe_tx_buf { struct mbuf *m_head; bus_dmamap_t map; }; struct ixgbe_rx_buf { struct mbuf *m_head; bus_dmamap_t map; }; /* * Bus dma allocation structure used by ixgbe_dma_malloc and ixgbe_dma_free. */ struct ixgbe_dma_alloc { caddr_t dma_vaddr; bus_dma_tag_t dma_tag; bus_dmamap_t dma_map; bus_dma_segment_t dma_seg; bus_size_t dma_size; int dma_nseg; }; /* * The transmit ring, one per tx queue */ struct tx_ring { struct ix_softc *sc; struct mutex tx_mtx; uint32_t me; uint32_t msix; uint32_t eims; uint32_t watchdog_timer; union ixgbe_adv_tx_desc *tx_base; uint32_t *tx_hwb; struct ixgbe_dma_alloc txdma; struct ixgbe_dma_alloc txwbdma; uint32_t next_avail_tx_desc; uint32_t next_tx_to_clean; struct ixgbe_tx_buf *tx_buffers; volatile uint16_t tx_avail; uint32_t txd_cmd; bus_dma_tag_t txtag; /* Soft Stats */ uint32_t no_tx_desc_avail; uint32_t no_tx_desc_late; uint64_t tx_irq; uint64_t tx_packets; }; /* * The Receive ring, one per rx queue */ struct rx_ring { struct ix_softc *sc; struct mutex rx_mtx; uint32_t me; uint32_t msix; uint32_t eims; uint32_t payload; union ixgbe_adv_rx_desc *rx_base; struct ixgbe_dma_alloc rxdma; #if 0 struct lro_ctrl lro; #endif unsigned int last_rx_desc_filled; unsigned int next_to_check; int rx_ndescs; struct ixgbe_rx_buf *rx_buffers; bus_dma_tag_t rxtag; struct mbuf *fmp; struct mbuf *lmp; /* Soft stats */ uint64_t rx_irq; uint64_t packet_count; uint64_t byte_count; }; /* Our adapter structure */ struct ix_softc { struct device dev; struct arpcom arpcom; struct ixgbe_hw hw; struct ixgbe_osdep osdep; struct resource *pci_mem; struct resource *msix_mem; /* * Interrupt resources: * Oplin has 20 MSIX messages * so allocate that for now. */ void *tag[IXGBE_MSGS]; struct resource *res[IXGBE_MSGS]; int rid[IXGBE_MSGS]; uint32_t eims_mask; struct ifmedia media; struct timeout timer; int msix; int if_flags; struct mutex core_mtx; /* Legacy Fast Intr handling */ int sfp_probe; workq_fn link_task; /* Info about the board itself */ uint32_t part_num; int link_active; uint16_t max_frame_size; uint32_t link_speed; uint32_t tx_int_delay; uint32_t tx_abs_int_delay; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; /* Indicates the cluster size to use */ int bigbufs; /* * Transmit rings: * Allocated at run time, an array of rings. */ struct tx_ring *tx_rings; int num_tx_desc; int num_tx_queues; /* * Receive rings: * Allocated at run time, an array of rings. */ struct rx_ring *rx_rings; int num_rx_desc; int num_rx_queues; uint32_t rx_process_limit; uint optics; /* Misc stats maintained by the driver */ unsigned long dropped_pkts; unsigned long mbuf_alloc_failed; unsigned long mbuf_cluster_failed; unsigned long no_tx_map_avail; unsigned long no_tx_dma_setup; unsigned long watchdog_events; unsigned long tso_tx; unsigned long linkvec; unsigned long link_irq; struct ixgbe_hw_stats stats; }; #endif /* _IX_H_ */