/************************************************************************** Copyright (c) 2001-2005, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ***************************************************************************/ /* $OpenBSD: if_ixgb.h,v 1.3 2006/02/26 01:27:16 brad Exp $ */ #ifndef _IXGB_H_DEFINED_ #define _IXGB_H_DEFINED_ #include "bpfilter.h" #include "vlan.h" #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #include #include #endif #if NVLAN > 0 #include #include #endif #if NBPFILTER > 0 #include #endif #include #include #include #include #include #include #include /* Tunables */ /* * TxDescriptors Valid Range: 64-4096 Default Value: 256 This value is the * number of transmit descriptors allocated by the driver. Increasing this * value allows the driver to queue more transmits. Each descriptor is 16 * bytes. */ #define IXGB_MAX_TXD 1024 /* * RxDescriptors Valid Range: 64-512 Default Value: 512 This value is the * number of receive descriptors allocated by the driver. Increasing this * value allows the driver to buffer more incoming packets. Each descriptor * is 16 bytes. A receive buffer is also allocated for each descriptor. The * maximum MTU size is 16110. * Note: Maximum number of receive descriptors is limited to 512 to avoid a * hardware descriptor cache issue under heavy receive traffic. */ #define IXGB_MAX_RXD 512 /* * TxIntDelay Valid Range: 0-65535 (0=off) Default Value: 32 This value * delays the generation of transmit interrupts in units of 1.024 * microseconds. Transmit interrupt reduction can improve CPU efficiency if * properly tuned for specific network traffic. If the system is reporting * dropped transmits, this value may be set too high causing the driver to * run out of available transmit descriptors. */ #define TIDV 32 /* * RxIntDelay Valid Range: 0-65535 (0=off) Default Value: 72 This value * delays the generation of receive interrupts in units of 1.024 * microseconds. Receive interrupt reduction can improve CPU efficiency if * properly tuned for specific network traffic. Increasing this value adds * extra latency to frame reception and can end up decreasing the throughput * of TCP traffic. If the system is reporting dropped receives, this value * may be set too high, causing the driver to run out of available receive * descriptors. * */ #define RDTR 72 /* * This parameter controls the duration of transmit watchdog timer. */ #define IXGB_TX_TIMEOUT 5 /* set to 5 seconds */ /* * This parameter controls when the driver calls the routine to reclaim * transmit descriptors. */ #define IXGB_TX_CLEANUP_THRESHOLD IXGB_MAX_TXD / 8 /* * Flow Control Types. * 1. ixgb_fc_none - Flow Control Disabled * 2. ixgb_fc_rx_pause - Flow Control Receive Only * 3. ixgb_fc_tx_pause - Flow Control Transmit Only * 4. ixgb_fc_full - Flow Control Enabled */ #define FLOW_CONTROL_NONE ixgb_fc_none #define FLOW_CONTROL_RX_PAUSE ixgb_fc_rx_pause #define FLOW_CONTROL_TX_PAUSE ixgb_fc_tx_pause #define FLOW_CONTROL_FULL ixgb_fc_full /* * Set the flow control type. Assign one of the above flow control types to be enabled. * Default Value: FLOW_CONTROL_FULL */ #define FLOW_CONTROL FLOW_CONTROL_FULL /* * Receive Flow control low threshold (when we send a resume frame) (FCRTL) * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity) must be * less than high threshold by at least 8 bytes Default Value: 163,840 * (0x28000) */ #define FCRTL 0x28000 /* * Receive Flow control high threshold (when we send a pause frame) (FCRTH) * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity) Default * Value: 196,608 (0x30000) */ #define FCRTH 0x30000 /* * Flow control request timeout (how long to pause the link partner's tx) * (PAP 15:0) Valid Range: 1 - 65535 Default Value: 256 (0x100) */ #define FCPAUSE 0x100 /* Tunables -- End */ #define IXGB_VENDOR_ID 0x8086 #define IXGB_MMBA 0x0010 /* Mem base address */ #define IXGB_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1)) #define IOCTL_CMD_TYPE u_long #define MAX_NUM_MULTICAST_ADDRESSES 128 #define PCI_ANY_ID (~0U) /* Defines for printing debug information */ #define DEBUG_INIT 0 #define DEBUG_IOCTL 0 #define DEBUG_HW 0 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) /* Supported RX Buffer Sizes */ #define IXGB_RXBUFFER_2048 2048 #define IXGB_RXBUFFER_4096 4096 #define IXGB_RXBUFFER_8192 8192 #define IXGB_RXBUFFER_16384 16384 #define IXGB_MAX_SCATTER 100 struct ixgb_buffer { struct mbuf *m_head; bus_dmamap_t map; /* bus_dma map for packet */ }; struct ixgb_q { bus_dmamap_t map; /* bus_dma map for packet */ }; /* * Bus dma allocation structure used by ixgb_dma_malloc and ixgb_dma_free. */ struct ixgb_dma_alloc { bus_addr_t dma_paddr; caddr_t dma_vaddr; bus_dma_tag_t dma_tag; bus_dmamap_t dma_map; bus_dma_segment_t dma_seg; bus_size_t dma_size; int dma_nseg; }; typedef enum _XSUM_CONTEXT_T { OFFLOAD_NONE, OFFLOAD_TCP_IP, OFFLOAD_UDP_IP } XSUM_CONTEXT_T; /* Our adapter structure */ struct ixgb_softc { struct device sc_dv; struct arpcom interface_data; struct ixgb_hw hw; /* OpenBSD operating-system-specific structures */ struct ixgb_osdep osdep; struct ifmedia media; int io_rid; void *sc_intrhand; struct timeout ixgb_intr_enable; struct timeout timer_handle; void *sc_powerhook; void *sc_shutdownhook; /* Info about the board itself */ u_int32_t part_num; u_int8_t link_active; u_int16_t link_speed; u_int16_t link_duplex; u_int32_t tx_int_delay; u_int32_t tx_abs_int_delay; u_int32_t rx_int_delay; u_int32_t rx_abs_int_delay; int raidc; XSUM_CONTEXT_T active_checksum_context; /* * Transmit definitions * * We have an array of num_tx_desc descriptors (handled by the * controller) paired with an array of tx_buffers (at * tx_buffer_area). The index of the next available descriptor is * next_avail_tx_desc. The number of remaining tx_desc is * num_tx_desc_avail. */ struct ixgb_dma_alloc txdma; /* bus_dma glue for tx desc */ struct ixgb_tx_desc *tx_desc_base; u_int32_t next_avail_tx_desc; u_int32_t oldest_used_tx_desc; volatile u_int16_t num_tx_desc_avail; u_int16_t num_tx_desc; u_int32_t txd_cmd; struct ixgb_buffer *tx_buffer_area; bus_dma_tag_t txtag; /* dma tag for tx */ /* * Receive definitions * * we have an array of num_rx_desc rx_desc (handled by the controller), * and paired with an array of rx_buffers (at rx_buffer_area). The * next pair to check on receive is at offset next_rx_desc_to_check */ struct ixgb_dma_alloc rxdma; /* bus_dma glue for rx desc */ struct ixgb_rx_desc *rx_desc_base; u_int32_t next_rx_desc_to_check; u_int16_t num_rx_desc; u_int32_t rx_buffer_len; struct ixgb_buffer *rx_buffer_area; bus_dma_tag_t rxtag; /* dma tag for Rx */ u_int32_t next_rx_desc_to_use; /* Jumbo frame */ struct mbuf *fmp; struct mbuf *lmp; /* Misc stats maintained by the driver */ unsigned long dropped_pkts; unsigned long mbuf_alloc_failed; unsigned long mbuf_cluster_failed; unsigned long no_tx_desc_avail1; unsigned long no_tx_desc_avail2; unsigned long no_tx_map_avail; unsigned long no_tx_dma_setup; unsigned long watchdog_events; struct ixgb_hw_stats stats; }; #endif /* _IXGB_H_DEFINED_ */