/* $OpenBSD: if_jmevar.h,v 1.3 2008/10/29 01:55:53 brad Exp $ */ /*- * Copyright (c) 2008, Pyun YongHyeon * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/jme/if_jmevar.h,v 1.1 2008/05/27 01:42:01 yongari Exp $ * $DragonFly: src/sys/dev/netif/jme/if_jmevar.h,v 1.4 2008/09/13 04:04:39 sephe Exp $ */ #ifndef _IF_JMEVAR_H #define _IF_JMEVAR_H /* * JMC250 supports upto 1024 descriptors and the number of * descriptors should be multiple of 16. */ #define JME_TX_RING_CNT 384 #define JME_RX_RING_CNT 256 /* * Tx/Rx descriptor queue base should be 16bytes aligned and * should not cross 4G bytes boundary on the 64bits address * mode. */ #define JME_TX_RING_ALIGN 16 #define JME_RX_RING_ALIGN 16 #define JME_TSO_MAXSEGSIZE 4096 #define JME_TSO_MAXSIZE (65535 + sizeof(struct ether_vlan_header)) #define JME_MAXTXSEGS 32 #define JME_RX_BUF_ALIGN sizeof(uint64_t) #define JME_SSB_ALIGN 16 #define JME_ADDR_LO(x) ((uint64_t) (x) & 0xFFFFFFFF) #define JME_ADDR_HI(x) ((uint64_t) (x) >> 32) #define JME_MSI_MESSAGES 8 #define JME_MSIX_MESSAGES 8 /* Water mark to kick reclaiming Tx buffers. */ #define JME_TX_DESC_HIWAT (JME_TX_RING_CNT - (((JME_TX_RING_CNT) * 3) / 10)) /* * JMC250 can send 9K jumbo frame on Tx path and can receive * 65535 bytes. */ #define JME_JUMBO_FRAMELEN 9216 #define JME_JUMBO_MTU \ (JME_JUMBO_FRAMELEN - sizeof(struct ether_vlan_header) - \ ETHER_HDR_LEN - ETHER_CRC_LEN) #define JME_MAX_MTU \ (ETHER_MAX_LEN + sizeof(struct ether_vlan_header) - \ ETHER_HDR_LEN - ETHER_CRC_LEN) /* * JMC250 can't handle Tx checksum offload/TSO if frame length * is larger than its FIFO size(2K). It's also good idea to not * use jumbo frame if hardware is running at half-duplex media. * Because the jumbo frame may not fit into the Tx FIFO, * collisions make hardware fetch frame from host memory with * DMA again which in turn slows down Tx performance * significantly. */ #define JME_TX_FIFO_SIZE 2000 /* * JMC250 has just 4K Rx FIFO. To support jumbo frame that is * larger than 4K bytes in length, Rx FIFO threshold should be * adjusted to minimize Rx FIFO overrun. */ #define JME_RX_FIFO_SIZE 4000 #define JME_DESC_INC(x, y) ((x) = ((x) + 1) % (y)) #define JME_PROC_MIN 10 #define JME_PROC_DEFAULT (JME_RX_RING_CNT / 2) #define JME_PROC_MAX (JME_RX_RING_CNT - 1) struct jme_txdesc { struct mbuf *tx_m; bus_dmamap_t tx_dmamap; int tx_ndesc; struct jme_desc *tx_desc; }; struct jme_rxdesc { struct mbuf *rx_m; bus_dmamap_t rx_dmamap; struct jme_desc *rx_desc; }; struct jme_chain_data{ bus_dma_tag_t jme_ring_tag; bus_dma_tag_t jme_buffer_tag; bus_dma_tag_t jme_ssb_tag; bus_dmamap_t jme_ssb_map; bus_dma_tag_t jme_tx_tag; struct jme_txdesc jme_txdesc[JME_TX_RING_CNT]; bus_dma_tag_t jme_rx_tag; struct jme_rxdesc jme_rxdesc[JME_RX_RING_CNT]; bus_dmamap_t jme_tx_ring_map; bus_dma_segment_t jme_tx_ring_seg; bus_dmamap_t jme_rx_ring_map; bus_dma_segment_t jme_rx_ring_seg; bus_dmamap_t jme_rx_sparemap; int jme_tx_prod; int jme_tx_cons; int jme_tx_cnt; int jme_rx_cons; int jme_rxlen; struct mbuf *jme_rxhead; struct mbuf *jme_rxtail; }; struct jme_ring_data { struct jme_desc *jme_tx_ring; bus_dma_segment_t jme_tx_ring_seg; bus_addr_t jme_tx_ring_paddr; struct jme_desc *jme_rx_ring; bus_dma_segment_t jme_rx_ring_seg; bus_addr_t jme_rx_ring_paddr; struct jme_ssb *jme_ssb_block; bus_dma_segment_t jme_ssb_block_seg; bus_addr_t jme_ssb_block_paddr; }; #define JME_TX_RING_ADDR(sc, i) \ ((sc)->jme_rdata.jme_tx_ring_paddr + sizeof(struct jme_desc) * (i)) #define JME_RX_RING_ADDR(sc, i) \ ((sc)->jme_rdata.jme_rx_ring_paddr + sizeof(struct jme_desc) * (i)) #define JME_TX_RING_SIZE \ (sizeof(struct jme_desc) * JME_TX_RING_CNT) #define JME_RX_RING_SIZE \ (sizeof(struct jme_desc) * JME_RX_RING_CNT) #define JME_SSB_SIZE sizeof(struct jme_ssb) struct jme_dmamap_ctx { int nsegs; bus_dma_segment_t *segs; }; /* * Software state per device. */ struct jme_softc { struct device sc_dev; struct arpcom sc_arpcom; int jme_mem_rid; struct resource *jme_mem_res; bus_space_tag_t jme_mem_bt; bus_space_handle_t jme_mem_bh; bus_size_t jme_mem_size; bus_dma_tag_t sc_dmat; pci_chipset_tag_t jme_pct; pcitag_t jme_pcitag; int jme_irq_rid; struct resource *jme_irq_res; void *sc_irq_handle; struct mii_data sc_miibus; int jme_phyaddr; uint32_t jme_tx_dma_size; uint32_t jme_rx_dma_size; uint32_t jme_caps; #define JME_CAP_FPGA 0x0001 #define JME_CAP_PCIE 0x0002 #define JME_CAP_PMCAP 0x0004 #define JME_CAP_FASTETH 0x0008 #define JME_CAP_JUMBO 0x0010 uint32_t jme_workaround; #define JME_WA_CRCERRORS 0x0001 #define JME_WA_PACKETLOSS 0x0002 uint32_t jme_flags; #define JME_FLAG_MSI 0x0001 #define JME_FLAG_MSIX 0x0002 #define JME_FLAG_DETACH 0x0004 #define JME_FLAG_LINK 0x0008 struct timeout jme_tick_ch; struct jme_chain_data jme_cdata; struct jme_ring_data jme_rdata; uint32_t jme_txcsr; uint32_t jme_rxcsr; int jme_txd_spare; /* * Sysctl variables */ int jme_process_limit; int jme_tx_coal_to; int jme_tx_coal_pkt; int jme_rx_coal_to; int jme_rx_coal_pkt; }; /* Register access macros. */ #define CSR_WRITE_4(_sc, reg, val) \ bus_space_write_4((_sc)->jme_mem_bt, (_sc)->jme_mem_bh, (reg), (val)) #define CSR_READ_4(_sc, reg) \ bus_space_read_4((_sc)->jme_mem_bt, (_sc)->jme_mem_bh, (reg)) #define JME_MAXERR 5 #define JME_RXCHAIN_RESET(_sc) \ do { \ (_sc)->jme_cdata.jme_rxhead = NULL; \ (_sc)->jme_cdata.jme_rxtail = NULL; \ (_sc)->jme_cdata.jme_rxlen = 0; \ } while (0) #define JME_TX_TIMEOUT 5 #define JME_TIMEOUT 1000 #define JME_PHY_TIMEOUT 1000 #define JME_EEPROM_TIMEOUT 1000 #define JME_TXD_RSVD 1 #endif