/* $NetBSD: if_lmc_common.c,v 1.1 1999/03/25 03:32:43 explorer Exp $ */ /*- * Copyright (c) 1997-1999 LAN Media Corporation (LMC) * All rights reserved. www.lanmedia.com * * This code is written by Michael Graff for LMC. * The code is derived from permitted modifications to software created * by Matt Thomas (matt@3am-software.com). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following disclaimer * in the documentation and/or other materials provided with the * distribution. * 3. All marketing or advertising materials mentioning features or * use of this software must display the following acknowledgement: * This product includes software developed by LAN Media Corporation * and its contributors. * 4. Neither the name of LAN Media Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY LAN MEDIA CORPORATION AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1994-1997 Matt Thomas (matt@3am-software.com) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software withough specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include /* only for declaration of wakeup() used by vm.h */ #if defined(__FreeBSD__) #include #elif defined(__bsdi__) || defined(__NetBSD__) || defined(__OpenBSD__) #include #endif #if defined(__NetBSD__) #include #include "rnd.h" #if NRND > 0 #include #endif #endif #if defined(__OpenBSD__) #include #endif #include #include #include #include #include "bpfilter.h" #if NBPFILTER > 0 #include #include #endif #include #include #include #if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) #include #endif #if defined(__bsdi__) #if INET #include #include #include #endif #include #include #include #include #include #include #endif #if defined(__FreeBSD__) #include #include #if NPCI > 0 #include #include #define INCLUDE_PATH_PREFIX "pci/" #endif #endif /* __FreeBSD__ */ #if defined(__bsdi__) #include #include #include #include #include #include #define INCLUDE_PATH_PREFIX "i386/pci/" #endif /* __bsdi__ */ #if defined(__NetBSD__) || defined(__OpenBSD__) #include #if defined(__alpha__) && defined(__NetBSD__) #include #endif #include #include #include #define INCLUDE_PATH_PREFIX "dev/pci/" #endif /* __NetBSD__ */ #if defined(__OpenBSD__) #define d_length1 u.bd_length1 #define d_length2 u.bd_length2 #define d_flag u.bd_flag #endif /* * Sigh. Every OS puts these in different places. NetBSD and FreeBSD use * a C preprocessor that allows this hack, but BSDI does not. */ #if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__OpenBSD__) #include INCLUDE_PATH_PREFIX "if_lmc_types.h" #include INCLUDE_PATH_PREFIX "if_lmcioctl.h" #include INCLUDE_PATH_PREFIX "if_lmcvar.h" #else /* BSDI */ #include "i386/pci/if_lmc_types.h" #include "i386/pci/if_lmcioctl.h" #include "i386/pci/if_lmcvar.h" #endif void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) { sc->lmc_gpio_io &= ~bits; LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io)); } void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) { sc->lmc_gpio_io |= bits; LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io)); } void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) { sc->lmc_miireg16 &= ~led; lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); } void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) { sc->lmc_miireg16 |= led; lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); } void lmc_reset(lmc_softc_t * const sc) { sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET; lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET; lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); /* * make some of the GPIO pins be outputs */ lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET); /* * drive DP and RESET low to force configuration. This also forces * the transmitter clock to be internal, but we expect to reset * that later anyway. */ sc->lmc_gpio &= ~(LMC_GEP_DP | LMC_GEP_RESET); LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); /* * hold for more than 10 microseconds */ DELAY(50); /* * stop driving Xilinx-related signals */ lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET); /* * busy wait for the chip to reset */ while ((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0) ; /* * Call media specific init routine */ sc->lmc_media->init(sc); } void lmc_dec_reset(lmc_softc_t * const sc) { #ifndef __linux__ lmc_ringinfo_t *ri; tulip_desc_t *di; #endif u_int32_t val; /* * disable all interrupts */ sc->lmc_intrmask = 0; LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask); /* * we are, obviously, down. */ #ifndef __linux__ sc->lmc_flags &= ~(LMC_IFUP | LMC_MODEMOK); DP(("lmc_dec_reset\n")); #endif /* * Reset the chip with a software reset command. * Wait 10 microseconds (actually 50 PCI cycles but at * 33MHz that comes to two microseconds but wait a * bit longer anyways) */ LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET); DELAY(10); sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command); /* * We want: * no ethernet address in frames we write * disable padding (txdesc, padding disable) * ignore runt frames (rdes0 bit 15) * no receiver watchdog or transmitter jabber timer * (csr15 bit 0,14 == 1) * if using 16-bit CRC, turn off CRC (trans desc, crc disable) */ #ifndef TULIP_CMD_RECEIVEALL #define TULIP_CMD_RECEIVEALL 0x40000000L #endif sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS | TULIP_CMD_FULLDUPLEX | TULIP_CMD_PASSBADPKT | TULIP_CMD_NOHEARTBEAT | TULIP_CMD_PORTSELECT | TULIP_CMD_RECEIVEALL | TULIP_CMD_MUSTBEONE ); sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE | TULIP_CMD_THRESHOLDCTL | TULIP_CMD_STOREFWD | TULIP_CMD_TXTHRSHLDCTL ); LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode); /* * disable receiver watchdog and transmit jabber */ val = LMC_CSR_READ(sc, csr_sia_general); val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE); LMC_CSR_WRITE(sc, csr_sia_general, val); /* * turn off those LEDs... */ sc->lmc_miireg16 |= LMC_MII16_LED_ALL; lmc_led_on(sc, LMC_MII16_LED0); #ifndef __linux__ /* * reprogram the tx desc, rx desc, and PCI bus options */ LMC_CSR_WRITE(sc, csr_txlist, LMC_KVATOPHYS(sc, &sc->lmc_txinfo.ri_first[0])); LMC_CSR_WRITE(sc, csr_rxlist, LMC_KVATOPHYS(sc, &sc->lmc_rxinfo.ri_first[0])); LMC_CSR_WRITE(sc, csr_busmode, (1 << (LMC_BURSTSIZE(sc->lmc_unit) + 8)) |TULIP_BUSMODE_CACHE_ALIGN8 |TULIP_BUSMODE_READMULTIPLE |(BYTE_ORDER != LITTLE_ENDIAN ? TULIP_BUSMODE_BIGENDIAN : 0)); sc->lmc_txq.ifq_maxlen = LMC_TXDESCS; /* * Free all the mbufs that were on the transmit ring. */ for (;;) { struct mbuf *m; IF_DEQUEUE(&sc->lmc_txq, m); if (m == NULL) break; m_freem(m); } /* * reset descriptor state and reclaim all descriptors. */ ri = &sc->lmc_txinfo; ri->ri_nextin = ri->ri_nextout = ri->ri_first; ri->ri_free = ri->ri_max; for (di = ri->ri_first; di < ri->ri_last; di++) di->d_status = 0; /* * We need to collect all the mbufs were on the * receive ring before we reinit it either to put * them back on or to know if we have to allocate * more. */ ri = &sc->lmc_rxinfo; ri->ri_nextin = ri->ri_nextout = ri->ri_first; ri->ri_free = ri->ri_max; for (di = ri->ri_first; di < ri->ri_last; di++) { di->d_status = 0; di->d_length1 = 0; di->d_addr1 = 0; di->d_length2 = 0; di->d_addr2 = 0; } for (;;) { struct mbuf *m; IF_DEQUEUE(&sc->lmc_rxq, m); if (m == NULL) break; m_freem(m); } #endif } void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size) { sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size; sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size; sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size; sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size; sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size; sc->lmc_csrs.csr_status = csr_base + 5 * csr_size; sc->lmc_csrs.csr_command = csr_base + 6 * csr_size; sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size; sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size; sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size; sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size; sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size; sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size; sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size; sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size; sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size; }