/* $OpenBSD: if_pcn.c,v 1.4 2005/12/16 03:19:07 brad Exp $ */ /* $NetBSD: if_pcn.c,v 1.26 2005/05/07 09:15:44 is Exp $ */ /* * Copyright (c) 2001 Wasabi Systems, Inc. * All rights reserved. * * Written by Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for the AMD PCnet-PCI series of Ethernet * chips: * * * Am79c970 PCnet-PCI Single-Chip Ethernet Controller for PCI * Local Bus * * * Am79c970A PCnet-PCI II Single-Chip Full-Duplex Ethernet Controller * for PCI Local Bus * * * Am79c971 PCnet-FAST Single-Chip Full-Duplex 10/100Mbps * Ethernet Controller for PCI Local Bus * * * Am79c972 PCnet-FAST+ Enhanced 10/100Mbps PCI Ethernet Controller * with OnNow Support * * * Am79c973/Am79c975 PCnet-FAST III Single-Chip 10/100Mbps PCI * Ethernet Controller with Integrated PHY * * This also supports the virtual PCnet-PCI Ethernet interface found * in VMware. * * TODO: * * * Split this into bus-specific and bus-independent portions. * The core could also be used for the ILACC (Am79900) 32-bit * Ethernet chip (XXX only if we use an ILACC-compatible SWSTYLE). */ #if 0 #include __KERNEL_RCSID(0, "$NetBSD: if_pcn.c,v 1.26 2005/05/07 09:15:44 is Exp $"); #endif #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #include #if NBPFILTER > 0 #include #endif #include #include #include #include #include #include #include #include #include #include #include /* * Transmit descriptor list size. This is arbitrary, but allocate * enough descriptors for 128 pending transmissions, and 4 segments * per packet. This MUST work out to a power of 2. * * NOTE: We can't have any more than 512 Tx descriptors, SO BE CAREFUL! * * So we play a little trick here. We give each packet up to 16 * DMA segments, but only allocate the max of 512 descriptors. The * transmit logic can deal with this, we just are hoping to sneak by. */ #define PCN_NTXSEGS 16 #define PCN_TXQUEUELEN 128 #define PCN_TXQUEUELEN_MASK (PCN_TXQUEUELEN - 1) #define PCN_NTXDESC 512 #define PCN_NTXDESC_MASK (PCN_NTXDESC - 1) #define PCN_NEXTTX(x) (((x) + 1) & PCN_NTXDESC_MASK) #define PCN_NEXTTXS(x) (((x) + 1) & PCN_TXQUEUELEN_MASK) /* Tx interrupt every N + 1 packets. */ #define PCN_TXINTR_MASK 7 /* * Receive descriptor list size. We have one Rx buffer per incoming * packet, so this logic is a little simpler. */ #define PCN_NRXDESC 128 #define PCN_NRXDESC_MASK (PCN_NRXDESC - 1) #define PCN_NEXTRX(x) (((x) + 1) & PCN_NRXDESC_MASK) /* * Control structures are DMA'd to the PCnet chip. We allocate them in * a single clump that maps to a single DMA segment to make several things * easier. */ struct pcn_control_data { /* The transmit descriptors. */ struct letmd pcd_txdescs[PCN_NTXDESC]; /* The receive descriptors. */ struct lermd pcd_rxdescs[PCN_NRXDESC]; /* The init block. */ struct leinit pcd_initblock; }; #define PCN_CDOFF(x) offsetof(struct pcn_control_data, x) #define PCN_CDTXOFF(x) PCN_CDOFF(pcd_txdescs[(x)]) #define PCN_CDRXOFF(x) PCN_CDOFF(pcd_rxdescs[(x)]) #define PCN_CDINITOFF PCN_CDOFF(pcd_initblock) /* * Software state for transmit jobs. */ struct pcn_txsoft { struct mbuf *txs_mbuf; /* head of our mbuf chain */ bus_dmamap_t txs_dmamap; /* our DMA map */ int txs_firstdesc; /* first descriptor in packet */ int txs_lastdesc; /* last descriptor in packet */ }; /* * Software state for receive jobs. */ struct pcn_rxsoft { struct mbuf *rxs_mbuf; /* head of our mbuf chain */ bus_dmamap_t rxs_dmamap; /* our DMA map */ }; /* * Description of Rx FIFO watermarks for various revisions. */ static const char * const pcn_79c970_rcvfw[] = { "16 bytes", "64 bytes", "128 bytes", NULL, }; static const char * const pcn_79c971_rcvfw[] = { "16 bytes", "64 bytes", "112 bytes", NULL, }; /* * Description of Tx start points for various revisions. */ static const char * const pcn_79c970_xmtsp[] = { "8 bytes", "64 bytes", "128 bytes", "248 bytes", }; static const char * const pcn_79c971_xmtsp[] = { "20 bytes", "64 bytes", "128 bytes", "248 bytes", }; static const char * const pcn_79c971_xmtsp_sram[] = { "44 bytes", "64 bytes", "128 bytes", "store-and-forward", }; /* * Description of Tx FIFO watermarks for various revisions. */ static const char * const pcn_79c970_xmtfw[] = { "16 bytes", "64 bytes", "128 bytes", NULL, }; static const char * const pcn_79c971_xmtfw[] = { "16 bytes", "64 bytes", "108 bytes", NULL, }; /* * Software state per device. */ struct pcn_softc { struct device sc_dev; /* generic device information */ bus_space_tag_t sc_st; /* bus space tag */ bus_space_handle_t sc_sh; /* bus space handle */ bus_dma_tag_t sc_dmat; /* bus DMA tag */ struct arpcom sc_arpcom; /* Ethernet common data */ void *sc_sdhook; /* shutdown hook */ /* Points to our media routines, etc. */ const struct pcn_variant *sc_variant; void *sc_ih; /* interrupt cookie */ struct mii_data sc_mii; /* MII/media information */ struct timeout sc_tick_timeout; /* tick timeout */ bus_dmamap_t sc_cddmamap; /* control data DMA map */ #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr /* Software state for transmit and receive descriptors. */ struct pcn_txsoft sc_txsoft[PCN_TXQUEUELEN]; struct pcn_rxsoft sc_rxsoft[PCN_NRXDESC]; /* Control data structures */ struct pcn_control_data *sc_control_data; #define sc_txdescs sc_control_data->pcd_txdescs #define sc_rxdescs sc_control_data->pcd_rxdescs #define sc_initblock sc_control_data->pcd_initblock const char * const *sc_rcvfw_desc; /* Rx FIFO watermark info */ int sc_rcvfw; const char * const *sc_xmtsp_desc; /* Tx start point info */ int sc_xmtsp; const char * const *sc_xmtfw_desc; /* Tx FIFO watermark info */ int sc_xmtfw; int sc_flags; /* misc. flags; see below */ int sc_swstyle; /* the software style in use */ int sc_txfree; /* number of free Tx descriptors */ int sc_txnext; /* next ready Tx descriptor */ int sc_txsfree; /* number of free Tx jobs */ int sc_txsnext; /* next free Tx job */ int sc_txsdirty; /* dirty Tx jobs */ int sc_rxptr; /* next ready Rx descriptor/job */ uint32_t sc_csr5; /* prototype CSR5 register */ uint32_t sc_mode; /* prototype MODE register */ }; /* sc_flags */ #define PCN_F_HAS_MII 0x0001 /* has MII */ #define PCN_CDTXADDR(sc, x) ((sc)->sc_cddma + PCN_CDTXOFF((x))) #define PCN_CDRXADDR(sc, x) ((sc)->sc_cddma + PCN_CDRXOFF((x))) #define PCN_CDINITADDR(sc) ((sc)->sc_cddma + PCN_CDINITOFF) #define PCN_CDTXSYNC(sc, x, n, ops) \ do { \ int __x, __n; \ \ __x = (x); \ __n = (n); \ \ /* If it will wrap around, sync to the end of the ring. */ \ if ((__x + __n) > PCN_NTXDESC) { \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ PCN_CDTXOFF(__x), sizeof(struct letmd) * \ (PCN_NTXDESC - __x), (ops)); \ __n -= (PCN_NTXDESC - __x); \ __x = 0; \ } \ \ /* Now sync whatever is left. */ \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ PCN_CDTXOFF(__x), sizeof(struct letmd) * __n, (ops)); \ } while (/*CONSTCOND*/0) #define PCN_CDRXSYNC(sc, x, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ PCN_CDRXOFF((x)), sizeof(struct lermd), (ops)) #define PCN_CDINITSYNC(sc, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ PCN_CDINITOFF, sizeof(struct leinit), (ops)) #define PCN_INIT_RXDESC(sc, x) \ do { \ struct pcn_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \ struct lermd *__rmd = &(sc)->sc_rxdescs[(x)]; \ struct mbuf *__m = __rxs->rxs_mbuf; \ \ /* \ * Note: We scoot the packet forward 2 bytes in the buffer \ * so that the payload after the Ethernet header is aligned \ * to a 4-byte boundary. \ */ \ __m->m_data = __m->m_ext.ext_buf + 2; \ \ if ((sc)->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3) { \ __rmd->rmd2 = \ htole32(__rxs->rxs_dmamap->dm_segs[0].ds_addr + 2); \ __rmd->rmd0 = 0; \ } else { \ __rmd->rmd2 = 0; \ __rmd->rmd0 = \ htole32(__rxs->rxs_dmamap->dm_segs[0].ds_addr + 2); \ } \ __rmd->rmd1 = htole32(LE_R1_OWN|LE_R1_ONES| \ (LE_BCNT(MCLBYTES - 2) & LE_R1_BCNT_MASK)); \ PCN_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);\ } while(/*CONSTCOND*/0) void pcn_start(struct ifnet *); void pcn_watchdog(struct ifnet *); int pcn_ioctl(struct ifnet *, u_long, caddr_t); int pcn_init(struct ifnet *); void pcn_stop(struct ifnet *, int); void pcn_shutdown(void *); void pcn_reset(struct pcn_softc *); void pcn_rxdrain(struct pcn_softc *); int pcn_add_rxbuf(struct pcn_softc *, int); void pcn_tick(void *); void pcn_spnd(struct pcn_softc *); void pcn_set_filter(struct pcn_softc *); int pcn_intr(void *); void pcn_txintr(struct pcn_softc *); int pcn_rxintr(struct pcn_softc *); int pcn_mii_readreg(struct device *, int, int); void pcn_mii_writereg(struct device *, int, int, int); void pcn_mii_statchg(struct device *); void pcn_79c970_mediainit(struct pcn_softc *); int pcn_79c970_mediachange(struct ifnet *); void pcn_79c970_mediastatus(struct ifnet *, struct ifmediareq *); void pcn_79c971_mediainit(struct pcn_softc *); int pcn_79c971_mediachange(struct ifnet *); void pcn_79c971_mediastatus(struct ifnet *, struct ifmediareq *); /* * Description of a PCnet-PCI variant. Used to select media access * method, mostly, and to print a nice description of the chip. */ static const struct pcn_variant { const char *pcv_desc; void (*pcv_mediainit)(struct pcn_softc *); uint16_t pcv_chipid; } pcn_variants[] = { { "Am79c970", pcn_79c970_mediainit, PARTID_Am79c970 }, { "Am79c970A", pcn_79c970_mediainit, PARTID_Am79c970A }, { "Am79c971", pcn_79c971_mediainit, PARTID_Am79c971 }, { "Am79c972", pcn_79c971_mediainit, PARTID_Am79c972 }, { "Am79c973", pcn_79c971_mediainit, PARTID_Am79c973 }, { "Am79c975", pcn_79c971_mediainit, PARTID_Am79c975 }, { "Unknown", pcn_79c971_mediainit, 0 }, }; int pcn_copy_small = 0; int pcn_match(struct device *, void *, void *); void pcn_attach(struct device *, struct device *, void *); struct cfattach pcn_ca = { sizeof(struct pcn_softc), pcn_match, pcn_attach, }; struct cfdriver pcn_cd = { 0, "pcn", DV_IFNET }; /* * Routines to read and write the PCnet-PCI CSR/BCR space. */ static __inline uint32_t pcn_csr_read(struct pcn_softc *sc, int reg) { bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg); return (bus_space_read_4(sc->sc_st, sc->sc_sh, PCN32_RDP)); } static __inline void pcn_csr_write(struct pcn_softc *sc, int reg, uint32_t val) { bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg); bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RDP, val); } static __inline uint32_t pcn_bcr_read(struct pcn_softc *sc, int reg) { bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg); return (bus_space_read_4(sc->sc_st, sc->sc_sh, PCN32_BDP)); } static __inline void pcn_bcr_write(struct pcn_softc *sc, int reg, uint32_t val) { bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RAP, reg); bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_BDP, val); } static const struct pcn_variant * pcn_lookup_variant(uint16_t chipid) { const struct pcn_variant *pcv; for (pcv = pcn_variants; pcv->pcv_chipid != 0; pcv++) { if (chipid == pcv->pcv_chipid) return (pcv); } /* * This covers unknown chips, which we simply treat like * a generic PCnet-FAST. */ return (pcv); } int pcn_match(struct device *parent, void *match, void *aux) { struct pci_attach_args *pa = aux; if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_AMD) return (0); switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_AMD_PCNET_PCI: /* Beat if_le_pci.c */ return (10); } return (0); } void pcn_attach(struct device *parent, struct device *self, void *aux) { struct pcn_softc *sc = (struct pcn_softc *) self; struct pci_attach_args *pa = aux; struct ifnet *ifp = &sc->sc_arpcom.ac_if; pci_chipset_tag_t pc = pa->pa_pc; pci_intr_handle_t ih; const char *intrstr = NULL; bus_space_tag_t iot, memt; bus_space_handle_t ioh, memh; bus_dma_segment_t seg; int ioh_valid, memh_valid; int i, rseg, error; pcireg_t pmode; uint32_t chipid, reg; uint8_t enaddr[ETHER_ADDR_LEN]; int pmreg; timeout_set(&sc->sc_tick_timeout, pcn_tick, sc); /* * Map the device. */ ioh_valid = (pci_mapreg_map(pa, PCN_PCI_CBIO, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL, 0) == 0); memh_valid = (pci_mapreg_map(pa, PCN_PCI_CBMEM, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &memt, &memh, NULL, NULL, 0) == 0); if (memh_valid) { sc->sc_st = memt; sc->sc_sh = memh; } else if (ioh_valid) { sc->sc_st = iot; sc->sc_sh = ioh; } else { printf(": unable to map device registers\n"); return; } sc->sc_dmat = pa->pa_dmat; /* Get it out of power save mode, if needed. */ if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pmreg, 0)) { pmode = pci_conf_read(pc, pa->pa_tag, pmreg + PCI_PMCSR) & PCI_PMCSR_STATE_MASK; if (pmode == PCI_PMCSR_STATE_D3) { /* * The card has lost all configuration data in * this state, so punt. */ printf(": unable to wake from power state D3\n"); return; } if (pmode != PCI_PMCSR_STATE_D0) { printf(": waking up from power date D%d", pmode); pci_conf_write(pc, pa->pa_tag, pmreg + PCI_PMCSR, PCI_PMCSR_STATE_D0); } } /* * Reset the chip to a known state. This also puts the * chip into 32-bit mode. */ pcn_reset(sc); #if !defined(PCN_NO_PROM) /* * Read the Ethernet address from the EEPROM. */ for (i = 0; i < ETHER_ADDR_LEN; i++) enaddr[i] = bus_space_read_1(sc->sc_st, sc->sc_sh, PCN32_APROM + i); #else /* * The PROM is not used; instead we assume that the MAC address * has been programmed into the device's physical address * registers by the boot firmware */ for (i=0; i < 3; i++) { uint32_t val; val = pcn_csr_read(sc, LE_CSR12 + i); enaddr[2*i] = val & 0x0ff; enaddr[2*i+1] = (val >> 8) & 0x0ff; } #endif /* * Now that the device is mapped, attempt to figure out what * kind of chip we have. Note that IDL has all 32 bits of * the chip ID when we're in 32-bit mode. */ chipid = pcn_csr_read(sc, LE_CSR88); sc->sc_variant = pcn_lookup_variant(CHIPID_PARTID(chipid)); /* * Map and establish our interrupt. */ if (pci_intr_map(pa, &ih)) { printf(": unable to map interrupt\n", sc->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, pcn_intr, sc, self->dv_xname); if (sc->sc_ih == NULL) { printf("%s: unable to establish interrupt", sc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } /* * Allocate the control data structures, and create and load the * DMA map for it. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct pcn_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 0)) != 0) { printf(": unable to allocate control data, error = %d\n", error); return; } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(struct pcn_control_data), (caddr_t *)&sc->sc_control_data, BUS_DMA_COHERENT)) != 0) { printf(": unable to map control data, error = %d\n", error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(struct pcn_control_data), 1, sizeof(struct pcn_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { printf(": unable to create control data DMA map, " "error = %d\n", error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, sc->sc_control_data, sizeof(struct pcn_control_data), NULL, 0)) != 0) { printf(": unable to load control data DMA map, error = %d\n", error); goto fail_3; } /* Create the transmit buffer DMA maps. */ for (i = 0; i < PCN_TXQUEUELEN; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, PCN_NTXSEGS, MCLBYTES, 0, 0, &sc->sc_txsoft[i].txs_dmamap)) != 0) { printf(": unable to create tx DMA map %d, " "error = %d\n", i, error); goto fail_4; } } /* Create the receive buffer DMA maps. */ for (i = 0; i < PCN_NRXDESC; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { printf(": unable to create rx DMA map %d, " "error = %d\n", i, error); goto fail_5; } sc->sc_rxsoft[i].rxs_mbuf = NULL; } printf(", %s, rev %d: %s, address %s\n", sc->sc_variant->pcv_desc, CHIPID_VER(chipid), intrstr, ether_sprintf(enaddr)); /* Initialize our media structures. */ (*sc->sc_variant->pcv_mediainit)(sc); /* * Initialize FIFO watermark info. */ switch (sc->sc_variant->pcv_chipid) { case PARTID_Am79c970: case PARTID_Am79c970A: sc->sc_rcvfw_desc = pcn_79c970_rcvfw; sc->sc_xmtsp_desc = pcn_79c970_xmtsp; sc->sc_xmtfw_desc = pcn_79c970_xmtfw; break; default: sc->sc_rcvfw_desc = pcn_79c971_rcvfw; /* * Read BCR25 to determine how much SRAM is * on the board. If > 0, then we the chip * uses different Start Point thresholds. * * Note BCR25 and BCR26 are loaded from the * EEPROM on RST, and unaffected by S_RESET, * so we don't really have to worry about * them except for this. */ reg = pcn_bcr_read(sc, LE_BCR25) & 0x00ff; if (reg != 0) sc->sc_xmtsp_desc = pcn_79c971_xmtsp_sram; else sc->sc_xmtsp_desc = pcn_79c971_xmtsp; sc->sc_xmtfw_desc = pcn_79c971_xmtfw; break; } /* * Set up defaults -- see the tables above for what these * values mean. * * XXX How should we tune RCVFW and XMTFW? */ sc->sc_rcvfw = 1; /* minimum for full-duplex */ sc->sc_xmtsp = 1; sc->sc_xmtfw = 0; ifp = &sc->sc_arpcom.ac_if; bcopy(enaddr, sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN); bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = pcn_ioctl; ifp->if_start = pcn_start; ifp->if_watchdog = pcn_watchdog; IFQ_SET_MAXLEN(&ifp->if_snd, PCN_NTXDESC -1); IFQ_SET_READY(&ifp->if_snd); /* Attach the interface. */ if_attach(ifp); ether_ifattach(ifp); /* Make sure the interface is shutdown during reboot. */ sc->sc_sdhook = shutdownhook_establish(pcn_shutdown, sc); if (sc->sc_sdhook == NULL) printf("%s: WARNING: unable to establish shutdown hook\n", sc->sc_dev.dv_xname); return; /* * Free any resources we've allocated during the failed attach * attempt. Do this in reverse order and fall through. */ fail_5: for (i = 0; i < PCN_NRXDESC; i++) { if (sc->sc_rxsoft[i].rxs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxsoft[i].rxs_dmamap); } fail_4: for (i = 0; i < PCN_TXQUEUELEN; i++) { if (sc->sc_txsoft[i].txs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_txsoft[i].txs_dmamap); } bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); fail_2: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, sizeof(struct pcn_control_data)); fail_1: bus_dmamem_free(sc->sc_dmat, &seg, rseg); } /* * pcn_shutdown: * * Make sure the interface is stopped at reboot time. */ void pcn_shutdown(void *arg) { struct pcn_softc *sc = arg; pcn_stop(&sc->sc_arpcom.ac_if, 1); } /* * pcn_start: [ifnet interface function] * * Start packet transmission on the interface. */ void pcn_start(struct ifnet *ifp) { struct pcn_softc *sc = ifp->if_softc; struct mbuf *m0, *m; struct pcn_txsoft *txs; bus_dmamap_t dmamap; int error, nexttx, lasttx = -1, ofree, seg; if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) return; /* * Remember the previous number of free descriptors and * the first descriptor we'll use. */ ofree = sc->sc_txfree; /* * Loop through the send queue, setting up transmit descriptors * until we drain the queue, or use up all available transmit * descriptors. */ for (;;) { /* Grab a packet off the queue. */ IFQ_POLL(&ifp->if_snd, m0); if (m0 == NULL) break; m = NULL; /* Get a work queue entry. */ if (sc->sc_txsfree == 0) break; txs = &sc->sc_txsoft[sc->sc_txsnext]; dmamap = txs->txs_dmamap; /* * Load the DMA map. If this fails, the packet either * didn't fit in the alloted number of segments, or we * were short on resources. In this case, we'll copy * and try again. */ if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) break; if (m0->m_pkthdr.len > MHLEN) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); break; } } m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t)); m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); if (error) break; } /* * Ensure we have enough descriptors free to describe * the packet. Note, we always reserve one descriptor * at the end of the ring as a termination point, to * prevent wrap-around. */ if (dmamap->dm_nsegs > (sc->sc_txfree - 1)) { /* * Not enough free descriptors to transmit this * packet. We haven't committed anything yet, * so just unload the DMA map, put the packet * back on the queue, and punt. Notify the upper * layer that there are not more slots left. * * XXX We could allocate an mbuf and copy, but * XXX is it worth it? */ ifp->if_flags |= IFF_OACTIVE; bus_dmamap_unload(sc->sc_dmat, dmamap); if (m != NULL) m_freem(m); break; } IFQ_DEQUEUE(&ifp->if_snd, m0); if (m != NULL) { m_freem(m0); m0 = m; } /* * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. */ /* Sync the DMA map. */ bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); /* * Initialize the transmit descriptors. */ if (sc->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3) { for (nexttx = sc->sc_txnext, seg = 0; seg < dmamap->dm_nsegs; seg++, nexttx = PCN_NEXTTX(nexttx)) { /* * If this is the first descriptor we're * enqueueing, don't set the OWN bit just * yet. That could cause a race condition. * We'll do it below. */ sc->sc_txdescs[nexttx].tmd0 = 0; sc->sc_txdescs[nexttx].tmd2 = htole32(dmamap->dm_segs[seg].ds_addr); sc->sc_txdescs[nexttx].tmd1 = htole32(LE_T1_ONES | (nexttx == sc->sc_txnext ? 0 : LE_T1_OWN) | (LE_BCNT(dmamap->dm_segs[seg].ds_len) & LE_T1_BCNT_MASK)); lasttx = nexttx; } } else { for (nexttx = sc->sc_txnext, seg = 0; seg < dmamap->dm_nsegs; seg++, nexttx = PCN_NEXTTX(nexttx)) { /* * If this is the first descriptor we're * enqueueing, don't set the OWN bit just * yet. That could cause a race condition. * We'll do it below. */ sc->sc_txdescs[nexttx].tmd0 = htole32(dmamap->dm_segs[seg].ds_addr); sc->sc_txdescs[nexttx].tmd2 = 0; sc->sc_txdescs[nexttx].tmd1 = htole32(LE_T1_ONES | (nexttx == sc->sc_txnext ? 0 : LE_T1_OWN) | (LE_BCNT(dmamap->dm_segs[seg].ds_len) & LE_T1_BCNT_MASK)); lasttx = nexttx; } } KASSERT(lasttx != -1); /* Interrupt on the packet, if appropriate. */ if ((sc->sc_txsnext & PCN_TXINTR_MASK) == 0) sc->sc_txdescs[lasttx].tmd1 |= htole32(LE_T1_LTINT); /* Set `start of packet' and `end of packet' appropriately. */ sc->sc_txdescs[lasttx].tmd1 |= htole32(LE_T1_ENP); sc->sc_txdescs[sc->sc_txnext].tmd1 |= htole32(LE_T1_OWN|LE_T1_STP); /* Sync the descriptors we're using. */ PCN_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* Kick the transmitter. */ pcn_csr_write(sc, LE_CSR0, LE_C0_INEA|LE_C0_TDMD); /* * Store a pointer to the packet so we can free it later, * and remember what txdirty will be once the packet is * done. */ txs->txs_mbuf = m0; txs->txs_firstdesc = sc->sc_txnext; txs->txs_lastdesc = lasttx; /* Advance the tx pointer. */ sc->sc_txfree -= dmamap->dm_nsegs; sc->sc_txnext = nexttx; sc->sc_txsfree--; sc->sc_txsnext = PCN_NEXTTXS(sc->sc_txsnext); #if NBPFILTER > 0 /* Pass the packet to any BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m0); #endif /* NBPFILTER > 0 */ } if (sc->sc_txsfree == 0 || sc->sc_txfree == 0) { /* No more slots left; notify upper layer. */ ifp->if_flags |= IFF_OACTIVE; } if (sc->sc_txfree != ofree) { /* Set a watchdog timer in case the chip flakes out. */ ifp->if_timer = 5; } } /* * pcn_watchdog: [ifnet interface function] * * Watchdog timer handler. */ void pcn_watchdog(struct ifnet *ifp) { struct pcn_softc *sc = ifp->if_softc; /* * Since we're not interrupting every packet, sweep * up before we report an error. */ pcn_txintr(sc); if (sc->sc_txfree != PCN_NTXDESC) { printf("%s: device timeout (txfree %d txsfree %d)\n", sc->sc_dev.dv_xname, sc->sc_txfree, sc->sc_txsfree); ifp->if_oerrors++; /* Reset the interface. */ (void) pcn_init(ifp); } /* Try to get more packets going. */ pcn_start(ifp); } /* * pcn_ioctl: [ifnet interface function] * * Handle control requests from the operator. */ int pcn_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct pcn_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; struct ifaddr *ifa = (struct ifaddr *)data; int s, error = 0; s = splnet(); if ((error = ether_ioctl(ifp, &sc->sc_arpcom, cmd, data)) > 0) { /* Try to get more packets going. */ pcn_start(ifp); splx(s); return (error); } switch (cmd) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: pcn_init(ifp); arp_ifinit(&sc->sc_arpcom, ifa); break; #endif default: pcn_init(ifp); break; } break; case SIOCSIFMTU: if (ifr->ifr_mtu > ETHERMTU || ifr->ifr_mtu < ETHERMIN) error = EINVAL; else if (ifp->if_mtu != ifr->ifr_mtu) ifp->if_mtu = ifr->ifr_mtu; break; case SIOCSIFFLAGS: /* * If interface is marked up and not running, then start it. * If it is marked down and running, stop it. * XXX If it's up then re-initialize it. This is so flags * such as IFF_PROMISC are handled. */ if (ifp->if_flags & IFF_UP) pcn_init(ifp); else if (ifp->if_flags & IFF_RUNNING) pcn_stop(ifp, 1); break; case SIOCADDMULTI: case SIOCDELMULTI: error = (cmd == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->sc_arpcom) : ether_delmulti(ifr, &sc->sc_arpcom); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware * filter accordingly. */ if (ifp->if_flags & IFF_RUNNING) error = pcn_init(ifp); else error = 0; } break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); break; default: error = EINVAL; } /* Try to get more packets going. */ pcn_start(ifp); splx(s); return (error); } /* * pcn_intr: * * Interrupt service routine. */ int pcn_intr(void *arg) { struct pcn_softc *sc = arg; struct ifnet *ifp = &sc->sc_arpcom.ac_if; uint32_t csr0; int wantinit, handled = 0; for (wantinit = 0; wantinit == 0;) { csr0 = pcn_csr_read(sc, LE_CSR0); if ((csr0 & LE_C0_INTR) == 0) break; /* ACK the bits and re-enable interrupts. */ pcn_csr_write(sc, LE_CSR0, csr0 & (LE_C0_INEA|LE_C0_BABL|LE_C0_MISS|LE_C0_MERR|LE_C0_RINT| LE_C0_TINT|LE_C0_IDON)); handled = 1; if (csr0 & LE_C0_RINT) wantinit = pcn_rxintr(sc); if (csr0 & LE_C0_TINT) pcn_txintr(sc); if (csr0 & LE_C0_ERR) { if (csr0 & LE_C0_BABL) ifp->if_oerrors++; if (csr0 & LE_C0_MISS) ifp->if_ierrors++; if (csr0 & LE_C0_MERR) { printf("%s: memory error\n", sc->sc_dev.dv_xname); wantinit = 1; break; } } if ((csr0 & LE_C0_RXON) == 0) { printf("%s: receiver disabled\n", sc->sc_dev.dv_xname); ifp->if_ierrors++; wantinit = 1; } if ((csr0 & LE_C0_TXON) == 0) { printf("%s: transmitter disabled\n", sc->sc_dev.dv_xname); ifp->if_oerrors++; wantinit = 1; } } if (handled) { if (wantinit) pcn_init(ifp); /* Try to get more packets going. */ pcn_start(ifp); } return (handled); } /* * pcn_spnd: * * Suspend the chip. */ void pcn_spnd(struct pcn_softc *sc) { int i; pcn_csr_write(sc, LE_CSR5, sc->sc_csr5 | LE_C5_SPND); for (i = 0; i < 10000; i++) { if (pcn_csr_read(sc, LE_CSR5) & LE_C5_SPND) return; delay(5); } printf("%s: WARNING: chip failed to enter suspended state\n", sc->sc_dev.dv_xname); } /* * pcn_txintr: * * Helper; handle transmit interrupts. */ void pcn_txintr(struct pcn_softc *sc) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; struct pcn_txsoft *txs; uint32_t tmd1, tmd2, tmd; int i, j; ifp->if_flags &= ~IFF_OACTIVE; /* * Go through our Tx list and free mbufs for those * frames which have been transmitted. */ for (i = sc->sc_txsdirty; sc->sc_txsfree != PCN_TXQUEUELEN; i = PCN_NEXTTXS(i), sc->sc_txsfree++) { txs = &sc->sc_txsoft[i]; PCN_CDTXSYNC(sc, txs->txs_firstdesc, txs->txs_dmamap->dm_nsegs, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); tmd1 = letoh32(sc->sc_txdescs[txs->txs_lastdesc].tmd1); if (tmd1 & LE_T1_OWN) break; /* * Slightly annoying -- we have to loop through the * descriptors we've used looking for ERR, since it * can appear on any descriptor in the chain. */ for (j = txs->txs_firstdesc;; j = PCN_NEXTTX(j)) { tmd = letoh32(sc->sc_txdescs[j].tmd1); if (tmd & LE_T1_ERR) { ifp->if_oerrors++; if (sc->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3) tmd2 = letoh32(sc->sc_txdescs[j].tmd0); else tmd2 = letoh32(sc->sc_txdescs[j].tmd2); if (tmd2 & LE_T2_UFLO) { if (sc->sc_xmtsp < LE_C80_XMTSP_MAX) { sc->sc_xmtsp++; printf("%s: transmit " "underrun; new threshold: " "%s\n", sc->sc_dev.dv_xname, sc->sc_xmtsp_desc[ sc->sc_xmtsp]); pcn_spnd(sc); pcn_csr_write(sc, LE_CSR80, LE_C80_RCVFW(sc->sc_rcvfw) | LE_C80_XMTSP(sc->sc_xmtsp) | LE_C80_XMTFW(sc->sc_xmtfw)); pcn_csr_write(sc, LE_CSR5, sc->sc_csr5); } else { printf("%s: transmit " "underrun\n", sc->sc_dev.dv_xname); } } else if (tmd2 & LE_T2_BUFF) { printf("%s: transmit buffer error\n", sc->sc_dev.dv_xname); } if (tmd2 & LE_T2_LCOL) ifp->if_collisions++; if (tmd2 & LE_T2_RTRY) ifp->if_collisions += 16; goto next_packet; } if (j == txs->txs_lastdesc) break; } if (tmd1 & LE_T1_ONE) ifp->if_collisions++; else if (tmd & LE_T1_MORE) { /* Real number is unknown. */ ifp->if_collisions += 2; } ifp->if_opackets++; next_packet: sc->sc_txfree += txs->txs_dmamap->dm_nsegs; bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); m_freem(txs->txs_mbuf); txs->txs_mbuf = NULL; } /* Update the dirty transmit buffer pointer. */ sc->sc_txsdirty = i; /* * If there are no more pending transmissions, cancel the watchdog * timer. */ if (sc->sc_txsfree == PCN_TXQUEUELEN) ifp->if_timer = 0; } /* * pcn_rxintr: * * Helper; handle receive interrupts. */ int pcn_rxintr(struct pcn_softc *sc) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; struct pcn_rxsoft *rxs; struct mbuf *m; uint32_t rmd1; int i, len; for (i = sc->sc_rxptr;; i = PCN_NEXTRX(i)) { rxs = &sc->sc_rxsoft[i]; PCN_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); rmd1 = letoh32(sc->sc_rxdescs[i].rmd1); if (rmd1 & LE_R1_OWN) break; /* * Check for errors and make sure the packet fit into * a single buffer. We have structured this block of * code the way it is in order to compress it into * one test in the common case (no error). */ if (__predict_false((rmd1 & (LE_R1_STP|LE_R1_ENP|LE_R1_ERR)) != (LE_R1_STP|LE_R1_ENP))) { /* Make sure the packet is in a single buffer. */ if ((rmd1 & (LE_R1_STP|LE_R1_ENP)) != (LE_R1_STP|LE_R1_ENP)) { printf("%s: packet spilled into next buffer\n", sc->sc_dev.dv_xname); return (1); /* pcn_intr() will re-init */ } /* * If the packet had an error, simple recycle the * buffer. */ if (rmd1 & LE_R1_ERR) { ifp->if_ierrors++; /* * If we got an overflow error, chances * are there will be a CRC error. In * this case, just print the overflow * error, and skip the others. */ if (rmd1 & LE_R1_OFLO) printf("%s: overflow error\n", sc->sc_dev.dv_xname); else { #define PRINTIT(x, str) \ if (rmd1 & (x)) \ printf("%s: %s\n", \ sc->sc_dev.dv_xname, str); PRINTIT(LE_R1_FRAM, "framing error"); PRINTIT(LE_R1_CRC, "CRC error"); PRINTIT(LE_R1_BUFF, "buffer error"); } #undef PRINTIT PCN_INIT_RXDESC(sc, i); continue; } } bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); /* * No errors; receive the packet. */ if (sc->sc_swstyle == LE_B20_SSTYLE_PCNETPCI3) len = letoh32(sc->sc_rxdescs[i].rmd0) & LE_R1_BCNT_MASK; else len = letoh32(sc->sc_rxdescs[i].rmd2) & LE_R1_BCNT_MASK; /* * The LANCE family includes the CRC with every packet; * trim it off here. */ len -= ETHER_CRC_LEN; /* * If the packet is small enough to fit in a * single header mbuf, allocate one and copy * the data into it. This greatly reduces * memory consumption when we receive lots * of small packets. * * Otherwise, we add a new buffer to the receive * chain. If this fails, we drop the packet and * recycle the old buffer. */ if (pcn_copy_small != 0 && len <= (MHLEN - 2)) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) goto dropit; m->m_data += 2; memcpy(mtod(m, caddr_t), mtod(rxs->rxs_mbuf, caddr_t), len); PCN_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); } else { m = rxs->rxs_mbuf; if (pcn_add_rxbuf(sc, i) != 0) { dropit: ifp->if_ierrors++; PCN_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); continue; } } m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; #if NBPFILTER > 0 /* Pass this up to any BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* NBPFILTER > 0 */ /* Pass it on. */ ether_input_mbuf(ifp, m); ifp->if_ipackets++; } /* Update the receive pointer. */ sc->sc_rxptr = i; return (0); } /* * pcn_tick: * * One second timer, used to tick the MII. */ void pcn_tick(void *arg) { struct pcn_softc *sc = arg; int s; s = splnet(); mii_tick(&sc->sc_mii); splx(s); timeout_add(&sc->sc_tick_timeout, hz); } /* * pcn_reset: * * Perform a soft reset on the PCnet-PCI. */ void pcn_reset(struct pcn_softc *sc) { /* * The PCnet-PCI chip is reset by reading from the * RESET register. Note that while the NE2100 LANCE * boards require a write after the read, the PCnet-PCI * chips do not require this. * * Since we don't know if we're in 16-bit or 32-bit * mode right now, issue both (it's safe) in the * hopes that one will succeed. */ (void) bus_space_read_2(sc->sc_st, sc->sc_sh, PCN16_RESET); (void) bus_space_read_4(sc->sc_st, sc->sc_sh, PCN32_RESET); /* Wait 1ms for it to finish. */ delay(1000); /* * Select 32-bit I/O mode by issuing a 32-bit write to the * RDP. Since the RAP is 0 after a reset, writing a 0 * to RDP is safe (since it simply clears CSR0). */ bus_space_write_4(sc->sc_st, sc->sc_sh, PCN32_RDP, 0); } /* * pcn_init: [ifnet interface function] * * Initialize the interface. Must be called at splnet(). */ int pcn_init(struct ifnet *ifp) { struct pcn_softc *sc = ifp->if_softc; struct pcn_rxsoft *rxs; uint8_t *enaddr = LLADDR(ifp->if_sadl); int i, error = 0; uint32_t reg; /* Cancel any pending I/O. */ pcn_stop(ifp, 0); /* Reset the chip to a known state. */ pcn_reset(sc); /* * On the Am79c970, select SSTYLE 2, and SSTYLE 3 on everything * else. * * XXX It'd be really nice to use SSTYLE 2 on all the chips, * because the structure layout is compatible with ILACC, * but the burst mode is only available in SSTYLE 3, and * burst mode should provide some performance enhancement. */ if (sc->sc_variant->pcv_chipid == PARTID_Am79c970) sc->sc_swstyle = LE_B20_SSTYLE_PCNETPCI2; else sc->sc_swstyle = LE_B20_SSTYLE_PCNETPCI3; pcn_bcr_write(sc, LE_BCR20, sc->sc_swstyle); /* Initialize the transmit descriptor ring. */ memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); PCN_CDTXSYNC(sc, 0, PCN_NTXDESC, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); sc->sc_txfree = PCN_NTXDESC; sc->sc_txnext = 0; /* Initialize the transmit job descriptors. */ for (i = 0; i < PCN_TXQUEUELEN; i++) sc->sc_txsoft[i].txs_mbuf = NULL; sc->sc_txsfree = PCN_TXQUEUELEN; sc->sc_txsnext = 0; sc->sc_txsdirty = 0; /* * Initialize the receive descriptor and receive job * descriptor rings. */ for (i = 0; i < PCN_NRXDESC; i++) { rxs = &sc->sc_rxsoft[i]; if (rxs->rxs_mbuf == NULL) { if ((error = pcn_add_rxbuf(sc, i)) != 0) { printf("%s: unable to allocate or map rx " "buffer %d, error = %d\n", sc->sc_dev.dv_xname, i, error); /* * XXX Should attempt to run with fewer receive * XXX buffers instead of just failing. */ pcn_rxdrain(sc); goto out; } } else PCN_INIT_RXDESC(sc, i); } sc->sc_rxptr = 0; /* Initialize MODE for the initialization block. */ sc->sc_mode = 0; if (ifp->if_flags & IFF_PROMISC) sc->sc_mode |= LE_C15_PROM; if ((ifp->if_flags & IFF_BROADCAST) == 0) sc->sc_mode |= LE_C15_DRCVBC; /* * If we have MII, simply select MII in the MODE register, * and clear ASEL. Otherwise, let ASEL stand (for now), * and leave PORTSEL alone (it is ignored with ASEL is set). */ if (sc->sc_flags & PCN_F_HAS_MII) { pcn_bcr_write(sc, LE_BCR2, pcn_bcr_read(sc, LE_BCR2) & ~LE_B2_ASEL); sc->sc_mode |= LE_C15_PORTSEL(PORTSEL_MII); /* * Disable MII auto-negotiation. We handle that in * our own MII layer. */ pcn_bcr_write(sc, LE_BCR32, pcn_bcr_read(sc, LE_BCR32) | LE_B32_DANAS); } /* * Set the Tx and Rx descriptor ring addresses in the init * block, the TLEN and RLEN other fields of the init block * MODE register. */ sc->sc_initblock.init_rdra = htole32(PCN_CDRXADDR(sc, 0)); sc->sc_initblock.init_tdra = htole32(PCN_CDTXADDR(sc, 0)); sc->sc_initblock.init_mode = htole32(sc->sc_mode | ((ffs(PCN_NTXDESC) - 1) << 28) | ((ffs(PCN_NRXDESC) - 1) << 20)); /* Set the station address in the init block. */ sc->sc_initblock.init_padr[0] = htole32(enaddr[0] | (enaddr[1] << 8) | (enaddr[2] << 16) | (enaddr[3] << 24)); sc->sc_initblock.init_padr[1] = htole32(enaddr[4] | (enaddr[5] << 8)); /* Set the multicast filter in the init block. */ pcn_set_filter(sc); /* Initialize CSR3. */ pcn_csr_write(sc, LE_CSR3, LE_C3_MISSM|LE_C3_IDONM|LE_C3_DXSUFLO); /* Initialize CSR4. */ pcn_csr_write(sc, LE_CSR4, LE_C4_DMAPLUS|LE_C4_APAD_XMT| LE_C4_MFCOM|LE_C4_RCVCCOM|LE_C4_TXSTRTM); /* Initialize CSR5. */ sc->sc_csr5 = LE_C5_LTINTEN|LE_C5_SINTE; pcn_csr_write(sc, LE_CSR5, sc->sc_csr5); /* * If we have an Am79c971 or greater, initialize CSR7. * * XXX Might be nice to use the MII auto-poll interrupt someday. */ switch (sc->sc_variant->pcv_chipid) { case PARTID_Am79c970: case PARTID_Am79c970A: /* Not available on these chips. */ break; default: pcn_csr_write(sc, LE_CSR7, LE_C7_FASTSPNDE); break; } /* * On the Am79c970A and greater, initialize BCR18 to * enable burst mode. * * Also enable the "no underflow" option on the Am79c971 and * higher, which prevents the chip from generating transmit * underflows, yet sill provides decent performance. Note if * chip is not connected to external SRAM, then we still have * to handle underflow errors (the NOUFLO bit is ignored in * that case). */ reg = pcn_bcr_read(sc, LE_BCR18); switch (sc->sc_variant->pcv_chipid) { case PARTID_Am79c970: break; case PARTID_Am79c970A: reg |= LE_B18_BREADE|LE_B18_BWRITE; break; default: reg |= LE_B18_BREADE|LE_B18_BWRITE|LE_B18_NOUFLO; break; } pcn_bcr_write(sc, LE_BCR18, reg); /* * Initialize CSR80 (FIFO thresholds for Tx and Rx). */ pcn_csr_write(sc, LE_CSR80, LE_C80_RCVFW(sc->sc_rcvfw) | LE_C80_XMTSP(sc->sc_xmtsp) | LE_C80_XMTFW(sc->sc_xmtfw)); /* * Send the init block to the chip, and wait for it * to be processed. */ PCN_CDINITSYNC(sc, BUS_DMASYNC_PREWRITE); pcn_csr_write(sc, LE_CSR1, PCN_CDINITADDR(sc) & 0xffff); pcn_csr_write(sc, LE_CSR2, (PCN_CDINITADDR(sc) >> 16) & 0xffff); pcn_csr_write(sc, LE_CSR0, LE_C0_INIT); delay(100); for (i = 0; i < 10000; i++) { if (pcn_csr_read(sc, LE_CSR0) & LE_C0_IDON) break; delay(10); } PCN_CDINITSYNC(sc, BUS_DMASYNC_POSTWRITE); if (i == 10000) { printf("%s: timeout processing init block\n", sc->sc_dev.dv_xname); error = EIO; goto out; } /* Set the media. */ (void) (*sc->sc_mii.mii_media.ifm_change)(ifp); /* Enable interrupts and external activity (and ACK IDON). */ pcn_csr_write(sc, LE_CSR0, LE_C0_INEA|LE_C0_STRT|LE_C0_IDON); if (sc->sc_flags & PCN_F_HAS_MII) { /* Start the one second MII clock. */ timeout_add(&sc->sc_tick_timeout, hz); } /* ...all done! */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; out: if (error) printf("%s: interface not running\n", sc->sc_dev.dv_xname); return (error); } /* * pcn_rxdrain: * * Drain the receive queue. */ void pcn_rxdrain(struct pcn_softc *sc) { struct pcn_rxsoft *rxs; int i; for (i = 0; i < PCN_NRXDESC; i++) { rxs = &sc->sc_rxsoft[i]; if (rxs->rxs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); m_freem(rxs->rxs_mbuf); rxs->rxs_mbuf = NULL; } } } /* * pcn_stop: [ifnet interface function] * * Stop transmission on the interface. */ void pcn_stop(struct ifnet *ifp, int disable) { struct pcn_softc *sc = ifp->if_softc; struct pcn_txsoft *txs; int i; if (sc->sc_flags & PCN_F_HAS_MII) { /* Stop the one second clock. */ timeout_del(&sc->sc_tick_timeout); /* Down the MII. */ mii_down(&sc->sc_mii); } /* Mark the interface as down and cancel the watchdog timer. */ ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; /* Stop the chip. */ pcn_csr_write(sc, LE_CSR0, LE_C0_STOP); /* Release any queued transmit buffers. */ for (i = 0; i < PCN_TXQUEUELEN; i++) { txs = &sc->sc_txsoft[i]; if (txs->txs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); m_freem(txs->txs_mbuf); txs->txs_mbuf = NULL; } } if (disable) pcn_rxdrain(sc); } /* * pcn_add_rxbuf: * * Add a receive buffer to the indicated descriptor. */ int pcn_add_rxbuf(struct pcn_softc *sc, int idx) { struct pcn_rxsoft *rxs = &sc->sc_rxsoft[idx]; struct mbuf *m; int error; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (ENOBUFS); MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); return (ENOBUFS); } if (rxs->rxs_mbuf != NULL) bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); rxs->rxs_mbuf = m; error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap, m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_READ|BUS_DMA_NOWAIT); if (error) { printf("%s: can't load rx DMA map %d, error = %d\n", sc->sc_dev.dv_xname, idx, error); panic("pcn_add_rxbuf"); } bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); PCN_INIT_RXDESC(sc, idx); return (0); } /* * pcn_set_filter: * * Set up the receive filter. */ void pcn_set_filter(struct pcn_softc *sc) { struct arpcom *ac = &sc->sc_arpcom; struct ifnet *ifp = &sc->sc_arpcom.ac_if; struct ether_multi *enm; struct ether_multistep step; uint32_t crc; /* * Set up the multicast address filter by passing all multicast * addresses through a CRC generator, and then using the high * order 6 bits as an index into the 64-bit logical address * filter. The high order bits select the word, while the rest * of the bits select the bit within the word. */ if (ifp->if_flags & IFF_PROMISC) goto allmulti; sc->sc_initblock.init_ladrf[0] = sc->sc_initblock.init_ladrf[1] = sc->sc_initblock.init_ladrf[2] = sc->sc_initblock.init_ladrf[3] = 0; ETHER_FIRST_MULTI(step, ac, enm); while (enm != NULL) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } crc = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN); /* Just want the 6 most significant bits. */ crc >>= 26; /* Set the corresponding bit in the filter. */ sc->sc_initblock.init_ladrf[crc >> 4] |= htole16(1 << (crc & 0xf)); ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; return; allmulti: ifp->if_flags |= IFF_ALLMULTI; sc->sc_initblock.init_ladrf[0] = sc->sc_initblock.init_ladrf[1] = sc->sc_initblock.init_ladrf[2] = sc->sc_initblock.init_ladrf[3] = 0xffff; } /* * pcn_79c970_mediainit: * * Initialize media for the Am79c970. */ void pcn_79c970_mediainit(struct pcn_softc *sc) { ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, pcn_79c970_mediachange, pcn_79c970_mediastatus); ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_5, PORTSEL_AUI, NULL); if (sc->sc_variant->pcv_chipid == PARTID_Am79c970A) ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_5|IFM_FDX, PORTSEL_AUI, NULL); ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T, PORTSEL_10T, NULL); if (sc->sc_variant->pcv_chipid == PARTID_Am79c970A) ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T|IFM_FDX, PORTSEL_10T, NULL); ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO, 0, NULL); if (sc->sc_variant->pcv_chipid == PARTID_Am79c970A) ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO|IFM_FDX, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } /* * pcn_79c970_mediastatus: [ifmedia interface function] * * Get the current interface media status (Am79c970 version). */ void pcn_79c970_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct pcn_softc *sc = ifp->if_softc; /* * The currently selected media is always the active media. * Note: We have no way to determine what media the AUTO * process picked. */ ifmr->ifm_active = sc->sc_mii.mii_media.ifm_media; } /* * pcn_79c970_mediachange: [ifmedia interface function] * * Set hardware to newly-selected media (Am79c970 version). */ int pcn_79c970_mediachange(struct ifnet *ifp) { struct pcn_softc *sc = ifp->if_softc; uint32_t reg; if (IFM_SUBTYPE(sc->sc_mii.mii_media.ifm_media) == IFM_AUTO) { /* * CSR15:PORTSEL doesn't matter. Just set BCR2:ASEL. */ reg = pcn_bcr_read(sc, LE_BCR2); reg |= LE_B2_ASEL; pcn_bcr_write(sc, LE_BCR2, reg); } else { /* * Clear BCR2:ASEL and set the new CSR15:PORTSEL value. */ reg = pcn_bcr_read(sc, LE_BCR2); reg &= ~LE_B2_ASEL; pcn_bcr_write(sc, LE_BCR2, reg); reg = pcn_csr_read(sc, LE_CSR15); reg = (reg & ~LE_C15_PORTSEL(PORTSEL_MASK)) | LE_C15_PORTSEL(sc->sc_mii.mii_media.ifm_cur->ifm_data); pcn_csr_write(sc, LE_CSR15, reg); } if ((sc->sc_mii.mii_media.ifm_media & IFM_FDX) != 0) { reg = LE_B9_FDEN; if (IFM_SUBTYPE(sc->sc_mii.mii_media.ifm_media) == IFM_10_5) reg |= LE_B9_AUIFD; pcn_bcr_write(sc, LE_BCR9, reg); } else pcn_bcr_write(sc, LE_BCR9, 0); return (0); } /* * pcn_79c971_mediainit: * * Initialize media for the Am79c971. */ void pcn_79c971_mediainit(struct pcn_softc *sc) { struct ifnet *ifp = &sc->sc_arpcom.ac_if; /* We have MII. */ sc->sc_flags |= PCN_F_HAS_MII; /* * The built-in 10BASE-T interface is mapped to the MII * on the PCNet-FAST. Unfortunately, there's no EEPROM * word that tells us which PHY to use. * This driver used to ignore all but the first PHY to * answer, but this code was removed to support multiple * external PHYs. As the default instance will be the first * one to answer, no harm is done by letting the possibly * non-connected internal PHY show up. */ /* Initialize our media structures and probe the MII. */ sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = pcn_mii_readreg; sc->sc_mii.mii_writereg = pcn_mii_writereg; sc->sc_mii.mii_statchg = pcn_mii_statchg; ifmedia_init(&sc->sc_mii.mii_media, 0, pcn_79c971_mediachange, pcn_79c971_mediastatus); mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); } else ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } /* * pcn_79c971_mediastatus: [ifmedia interface function] * * Get the current interface media status (Am79c971 version). */ void pcn_79c971_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct pcn_softc *sc = ifp->if_softc; mii_pollstat(&sc->sc_mii); ifmr->ifm_status = sc->sc_mii.mii_media_status; ifmr->ifm_active = sc->sc_mii.mii_media_active; } /* * pcn_79c971_mediachange: [ifmedia interface function] * * Set hardware to newly-selected media (Am79c971 version). */ int pcn_79c971_mediachange(struct ifnet *ifp) { struct pcn_softc *sc = ifp->if_softc; if (ifp->if_flags & IFF_UP) mii_mediachg(&sc->sc_mii); return (0); } /* * pcn_mii_readreg: [mii interface function] * * Read a PHY register on the MII. */ int pcn_mii_readreg(struct device *self, int phy, int reg) { struct pcn_softc *sc = (void *) self; uint32_t rv; pcn_bcr_write(sc, LE_BCR33, reg | (phy << PHYAD_SHIFT)); rv = pcn_bcr_read(sc, LE_BCR34) & LE_B34_MIIMD; if (rv == 0xffff) return (0); return (rv); } /* * pcn_mii_writereg: [mii interface function] * * Write a PHY register on the MII. */ void pcn_mii_writereg(struct device *self, int phy, int reg, int val) { struct pcn_softc *sc = (void *) self; pcn_bcr_write(sc, LE_BCR33, reg | (phy << PHYAD_SHIFT)); pcn_bcr_write(sc, LE_BCR34, val); } /* * pcn_mii_statchg: [mii interface function] * * Callback from MII layer when media changes. */ void pcn_mii_statchg(struct device *self) { struct pcn_softc *sc = (void *) self; if ((sc->sc_mii.mii_media_active & IFM_FDX) != 0) pcn_bcr_write(sc, LE_BCR9, LE_B9_FDEN); else pcn_bcr_write(sc, LE_BCR9, 0); }