/* $OpenBSD: if_sfreg.h,v 1.9 2005/12/17 07:31:27 miod Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/pci/if_sfreg.h,v 1.6 1999/12/05 20:02:45 wpaul Exp $ */ /* * Registers for the Adaptec AIC-6915 Starfire. The Starfire has a 512K * register space. These registers can be accessed in the following way: * - PCI config registers are always accessible through PCI config space * - Full 512K space mapped into memory using PCI memory mapped access * - 256-byte I/O space mapped through PCI I/O access * - Full 512K space mapped through indirect I/O using PCI I/O access * It's possible to use either memory mapped mode or I/O mode to access * the registers, but memory mapped is usually the easiest. All registers * are 32 bits wide and must be accessed using 32-bit operations. */ /* * Adaptec PCI vendor ID. */ #define AD_VENDORID 0x9004 /* * AIC-6915 PCI device ID. */ #define AD_DEVICEID_STARFIRE 0x6915 /* * AIC-6915 subsystem IDs. Adaptec uses the subsystem ID to identify * the exact kind of NIC on which the ASIC is mounted. Currently there * are six different variations. Note: the Adaptec manual lists code 0x28 * for two different NICs: the 62044 and the 69011/TX. This is a typo: * the code for the 62044 is really 0x18. */ #define AD_SUBSYSID_62011_REV0 0x0008 /* single port 10/100baseTX 64-bit */ #define AD_SUBSYSID_62011_REV1 0x0009 /* single port 10/100baseTX 64-bit */ #define AD_SUBSYSID_62022 0x0010 /* dual port 10/100baseTX 64-bit */ #define AD_SUBSYSID_62044 0x0018 /* quad port 10/100baseTX 64-bit */ #define AD_SUBSYSID_62020 0x0020 /* single port 10/100baseFX 64-bit */ #define AD_SUBSYSID_69011 0x0028 /* single port 10/100baseTX 32-bit */ /* * Starfire internal register space map. The entire register space * is available using PCI memory mapped mode. The SF_RMAP_INTREG * space is available using PCI I/O mode. The entire space can be * accessed using indirect I/O using the indirect I/O addr and * indirect I/O data registers located within the SF_RMAP_INTREG space. */ #define SF_RMAP_ROMADDR_BASE 0x00000 /* Expansion ROM space */ #define SF_RMAP_ROMADDR_MAX 0x3FFFF #define SF_RMAP_EXGPIO_BASE 0x40000 /* External general purpose regs */ #define SF_RMAP_EXGPIO_MAX 0x3FFFF #define SF_RMAP_INTREG_BASE 0x50000 /* Internal functional registers */ #define SF_RMAP_INTREG_MAX 0x500FF #define SF_RMAP_GENREG_BASE 0x50100 /* General purpose registers */ #define SF_RMAP_GENREG_MAX 0x5FFFF #define SF_RMAP_FIFO_BASE 0x60000 #define SF_RMAP_FIFO_MAX 0x6FFFF #define SF_RMAP_STS_BASE 0x70000 #define SF_RMAP_STS_MAX 0x70083 #define SF_RMAP_RSVD_BASE 0x70084 #define SF_RMAP_RSVD_MAX 0x7FFFF /* * PCI config header registers, 0x0000 to 0x003F */ #define SF_PCI_VENDOR_ID 0x0000 #define SF_PCI_DEVICE_ID 0x0002 #define SF_PCI_COMMAND 0x0004 #define SF_PCI_STATUS 0x0006 #define SF_PCI_REVID 0x0008 #define SF_PCI_CLASSCODE 0x0009 #define SF_PCI_CACHELEN 0x000C #define SF_PCI_LATENCY_TIMER 0x000D #define SF_PCI_HEADER_TYPE 0x000E #define SF_PCI_LOMEM 0x0010 #define SF_PCI_LOIO 0x0014 #define SF_PCI_SUBVEN_ID 0x002C #define SF_PCI_SYBSYS_ID 0x002E #define SF_PCI_BIOSROM 0x0030 #define SF_PCI_INTLINE 0x003C #define SF_PCI_INTPIN 0x003D #define SF_PCI_MINGNT 0x003E #define SF_PCI_MINLAT 0x003F /* * PCI registers, 0x0040 to 0x006F */ #define SF_PCI_DEVCFG 0x0040 #define SF_BACCTL 0x0044 #define SF_PCI_MON1 0x0048 #define SF_PCI_MON2 0x004C #define SF_PCI_CAPID 0x0050 /* 8 bits */ #define SF_PCI_NEXTPTR 0x0051 /* 8 bits */ #define SF_PCI_PWRMGMTCAP 0x0052 /* 16 bits */ #define SF_PCI_PWRMGMTCTRL 0x0054 /* 16 bits */ #define SF_PCI_PME_EVENT 0x0058 #define SF_PCI_EECTL 0x0060 #define SF_PCI_COMPLIANCE 0x0064 #define SF_INDIRECTIO_ADDR 0x0068 #define SF_INDIRECTIO_DATA 0x006C #define SF_PCIDEVCFG_RESET 0x00000001 #define SF_PCIDEVCFG_FORCE64 0x00000002 #define SF_PCIDEVCFG_SYSTEM64 0x00000004 #define SF_PCIDEVCFG_RSVD0 0x00000008 #define SF_PCIDEVCFG_INCR_INB 0x00000010 #define SF_PCIDEVCFG_ABTONPERR 0x00000020 #define SF_PCIDEVCFG_STPONPERR 0x00000040 #define SF_PCIDEVCFG_MR_ENB 0x00000080 #define SF_PCIDEVCFG_FIFOTHR 0x00000F00 #define SF_PCIDEVCFG_STPONCA 0x00001000 #define SF_PCIDEVCFG_PCIMEN 0x00002000 /* enable PCI bus master */ #define SF_PCIDEVCFG_LATSTP 0x00004000 #define SF_PCIDEVCFG_BYTE_ENB 0x00008000 #define SF_PCIDEVCFG_EECSWIDTH 0x00070000 #define SF_PCIDEVCFG_STPMWCA 0x00080000 #define SF_PCIDEVCFG_REGCSWIDTH 0x00700000 #define SF_PCIDEVCFG_INTR_ENB 0x00800000 #define SF_PCIDEVCFG_DPR_ENB 0x01000000 #define SF_PCIDEVCFG_RSVD1 0x02000000 #define SF_PCIDEVCFG_RSVD2 0x04000000 #define SF_PCIDEVCFG_STA_ENB 0x08000000 #define SF_PCIDEVCFG_RTA_ENB 0x10000000 #define SF_PCIDEVCFG_RMA_ENB 0x20000000 #define SF_PCIDEVCFG_SSE_ENB 0x40000000 #define SF_PCIDEVCFG_DPE_ENB 0x80000000 #define SF_BACCTL_BACDMA_ENB 0x00000001 #define SF_BACCTL_PREFER_RXDMA 0x00000002 #define SF_BACCTL_PREFER_TXDMA 0x00000004 #define SF_BACCTL_SINGLE_DMA 0x00000008 #define SF_BACCTL_SWAPMODE_DATA 0x00000030 #define SF_BACCTL_SWAPMODE_DESC 0x000000C0 #define SF_SWAPMODE_LE 0x00000000 #define SF_SWAPMODE_BE 0x00000010 #define SF_PSTATE_MASK 0x0003 #define SF_PSTATE_D0 0x0000 #define SF_PSTATE_D1 0x0001 #define SF_PSTATE_D2 0x0002 #define SF_PSTATE_D3 0x0003 #define SF_PME_EN 0x0010 #define SF_PME_STATUS 0x8000 /* * Ethernet registers 0x0070 to 0x00FF */ #define SF_GEN_ETH_CTL 0x0070 #define SF_TIMER_CTL 0x0074 #define SF_CURTIME 0x0078 #define SF_ISR 0x0080 #define SF_ISR_SHADOW 0x0084 #define SF_IMR 0x0088 #define SF_GPIO 0x008C #define SF_TXDQ_CTL 0x0090 #define SF_TXDQ_ADDR_HIPRIO 0x0094 #define SF_TXDQ_ADDR_LOPRIO 0x0098 #define SF_TXDQ_ADDR_HIADDR 0x009C #define SF_TXDQ_PRODIDX 0x00A0 #define SF_TXDQ_CONSIDX 0x00A4 #define SF_TXDMA_STS1 0x00A8 #define SF_TXDMA_STS2 0x00AC #define SF_TX_FRAMCTL 0x00B0 #define SF_TXCQ_ADDR_HI 0x00B4 #define SF_TXCQ_CTL 0x00B8 #define SF_RXCQ_CTL_1 0x00BC #define SF_RXCQ_CTL_2 0x00C0 #define SF_CQ_CONSIDX 0x00C4 #define SF_CQ_PRODIDX 0x00C8 #define SF_CQ_RXQ2 0x00CC #define SF_RXDMA_CTL 0x00D0 #define SF_RXDQ_CTL_1 0x00D4 #define SF_RXDQ_CTL_2 0x00D8 #define SF_RXDQ_ADDR_HIADDR 0x00DC #define SF_RXDQ_ADDR_Q1 0x00E0 #define SF_RXDQ_ADDR_Q2 0x00E4 #define SF_RXDQ_PTR_Q1 0x00E8 #define SF_RXDQ_PTR_Q2 0x00EC #define SF_RXDMA_STS 0x00F0 #define SF_RXFILT 0x00F4 #define SF_RX_FRAMETEST_OUT 0x00F8 /* Ethernet control register */ #define SF_ETHCTL_RX_ENB 0x00000001 #define SF_ETHCTL_TX_ENB 0x00000002 #define SF_ETHCTL_RXDMA_ENB 0x00000004 #define SF_ETHCTL_TXDMA_ENB 0x00000008 #define SF_ETHCTL_RXGFP_ENB 0x00000010 #define SF_ETHCTL_TXGFP_ENB 0x00000020 #define SF_ETHCTL_SOFTINTR 0x00000800 /* Timer control register */ #define SF_TIMER_IMASK_INTERVAL 0x0000001F #define SF_TIMER_IMASK_MODE 0x00000060 #define SF_TIMER_SMALLFRAME_BYP 0x00000100 #define SF_TIMER_SMALLRX_FRAME 0x00000600 #define SF_TIMER_TIMES_TEN 0x00000800 #define SF_TIMER_RXHIPRIO_BYP 0x00001000 #define SF_TIMER_TX_DMADONE_DLY 0x00002000 #define SF_TIMER_TX_QDONE_DLY 0x00004000 #define SF_TIMER_TX_FRDONE_DLY 0x00008000 #define SF_TIMER_GENTIMER 0x00FF0000 #define SF_TIMER_ONESHOT 0x01000000 #define SF_TIMER_GENTIMER_RES 0x02000000 #define SF_TIMER_TIMEST_RES 0x04000000 #define SF_TIMER_RXQ2DONE_DLY 0x10000000 #define SF_TIMER_EARLYRX2_DLY 0x20000000 #define SF_TIMER_RXQ1DONE_DLY 0x40000000 #define SF_TIMER_EARLYRX1_DLY 0x80000000 /* Interrupt status register */ #define SF_ISR_PCIINT_ASSERTED 0x00000001 #define SF_ISR_GFP_TX 0x00000002 #define SF_ISR_GFP_RX 0x00000004 #define SF_ISR_TX_BADID_HIPRIO 0x00000008 #define SF_ISR_TX_BADID_LOPRIO 0x00000010 #define SF_ISR_NO_TX_CSUM 0x00000020 #define SF_ISR_RXDQ2_NOBUFS 0x00000040 #define SF_ISR_RXGFP_NORESP 0x00000080 #define SF_ISR_RXDQ1_DMADONE 0x00000100 #define SF_ISR_RXDQ2_DMADONE 0x00000200 #define SF_ISR_RXDQ1_EARLY 0x00000400 #define SF_ISR_RXDQ2_EARLY 0x00000800 #define SF_ISR_TX_QUEUEDONE 0x00001000 #define SF_ISR_TX_DMADONE 0x00002000 #define SF_ISR_TX_TXDONE 0x00004000 #define SF_ISR_NORMALINTR 0x00008000 #define SF_ISR_RXDQ1_NOBUFS 0x00010000 #define SF_ISR_RXCQ2_NOBUFS 0x00020000 #define SF_ISR_TX_LOFIFO 0x00040000 #define SF_ISR_DMAERR 0x00080000 #define SF_ISR_PCIINT 0x00100000 #define SF_ISR_TXCQ_NOBUFS 0x00200000 #define SF_ISR_RXCQ1_NOBUFS 0x00400000 #define SF_ISR_SOFTINTR 0x00800000 #define SF_ISR_GENTIMER 0x01000000 #define SF_ISR_ABNORMALINTR 0x02000000 #define SF_ISR_RSVD0 0x04000000 #define SF_ISR_STATSOFLOW 0x08000000 #define SF_ISR_GPIO 0xF0000000 /* * Shadow interrupt status register. Unlike the normal IRQ register, * reading bits here does not automatically cause them to reset. */ #define SF_SISR_PCIINT_ASSERTED 0x00000001 #define SF_SISR_GFP_TX 0x00000002 #define SF_SISR_GFP_RX 0x00000004 #define SF_SISR_TX_BADID_HIPRIO 0x00000008 #define SF_SISR_TX_BADID_LOPRIO 0x00000010 #define SF_SISR_NO_TX_CSUM 0x00000020 #define SF_SISR_RXDQ2_NOBUFS 0x00000040 #define SF_SISR_RXGFP_NORESP 0x00000080 #define SF_SISR_RXDQ1_DMADONE 0x00000100 #define SF_SISR_RXDQ2_DMADONE 0x00000200 #define SF_SISR_RXDQ1_EARLY 0x00000400 #define SF_SISR_RXDQ2_EARLY 0x00000800 #define SF_SISR_TX_QUEUEDONE 0x00001000 #define SF_SISR_TX_DMADONE 0x00002000 #define SF_SISR_TX_TXDONE 0x00004000 #define SF_SISR_NORMALINTR 0x00008000 #define SF_SISR_RXDQ1_NOBUFS 0x00010000 #define SF_SISR_RXCQ2_NOBUFS 0x00020000 #define SF_SISR_TX_LOFIFO 0x00040000 #define SF_SISR_DMAERR 0x00080000 #define SF_SISR_PCIINT 0x00100000 #define SF_SISR_TXCQ_NOBUFS 0x00200000 #define SF_SISR_RXCQ1_NOBUFS 0x00400000 #define SF_SISR_SOFTINTR 0x00800000 #define SF_SISR_GENTIMER 0x01000000 #define SF_SISR_ABNORMALINTR 0x02000000 #define SF_SISR_RSVD0 0x04000000 #define SF_SISR_STATSOFLOW 0x08000000 #define SF_SISR_GPIO 0xF0000000 /* Interrupt mask register */ #define SF_IMR_PCIINT_ASSERTED 0x00000001 #define SF_IMR_GFP_TX 0x00000002 #define SF_IMR_GFP_RX 0x00000004 #define SF_IMR_TX_BADID_HIPRIO 0x00000008 #define SF_IMR_TX_BADID_LOPRIO 0x00000010 #define SF_IMR_NO_TX_CSUM 0x00000020 #define SF_IMR_RXDQ2_NOBUFS 0x00000040 #define SF_IMR_RXGFP_NORESP 0x00000080 #define SF_IMR_RXDQ1_DMADONE 0x00000100 #define SF_IMR_RXDQ2_DMADONE 0x00000200 #define SF_IMR_RXDQ1_EARLY 0x00000400 #define SF_IMR_RXDQ2_EARLY 0x00000800 #define SF_IMR_TX_QUEUEDONE 0x00001000 #define SF_IMR_TX_DMADONE 0x00002000 #define SF_IMR_TX_TXDONE 0x00004000 #define SF_IMR_NORMALINTR 0x00008000 #define SF_IMR_RXDQ1_NOBUFS 0x00010000 #define SF_IMR_RXCQ2_NOBUFS 0x00020000 #define SF_IMR_TX_LOFIFO 0x00040000 #define SF_IMR_DMAERR 0x00080000 #define SF_IMR_PCIINT 0x00100000 #define SF_IMR_TXCQ_NOBUFS 0x00200000 #define SF_IMR_RXCQ1_NOBUFS 0x00400000 #define SF_IMR_SOFTINTR 0x00800000 #define SF_IMR_GENTIMER 0x01000000 #define SF_IMR_ABNORMALINTR 0x02000000 #define SF_IMR_RSVD0 0x04000000 #define SF_IMR_STATSOFLOW 0x08000000 #define SF_IMR_GPIO 0xF0000000 #define SF_INTRS \ (SF_IMR_RXDQ2_NOBUFS|SF_IMR_RXDQ1_DMADONE|SF_IMR_RXDQ2_DMADONE| \ SF_IMR_TX_TXDONE|SF_IMR_RXDQ1_NOBUFS|SF_IMR_RXDQ2_DMADONE| \ SF_IMR_NORMALINTR|SF_IMR_ABNORMALINTR|SF_IMR_TXCQ_NOBUFS| \ SF_IMR_RXCQ1_NOBUFS|SF_IMR_RXCQ2_NOBUFS|SF_IMR_STATSOFLOW| \ SF_IMR_TX_LOFIFO) /* TX descriptor queue control registers */ #define SF_TXDQCTL_DESCTYPE 0x00000007 #define SF_TXDQCTL_NODMACMP 0x00000008 #define SF_TXDQCTL_MINSPACE 0x00000070 #define SF_TXDQCTL_64BITADDR 0x00000080 #define SF_TXDQCTL_BURSTLEN 0x00003F00 #define SF_TXDQCTL_SKIPLEN 0x001F0000 #define SF_TXDQCTL_HIPRIOTHRESH 0xFF000000 #define SF_TXBUFDESC_TYPE0 0x00000000 #define SF_TXBUFDESC_TYPE1 0x00000001 #define SF_TXBUFDESC_TYPE2 0x00000002 #define SF_TXBUFDESC_TYPE3 0x00000003 #define SF_TXBUFDESC_TYPE4 0x00000004 #define SF_TXMINSPACE_UNLIMIT 0x00000000 #define SF_TXMINSPACE_32BYTES 0x00000010 #define SF_TXMINSPACE_64BYTES 0x00000020 #define SF_TXMINSPACE_128BYTES 0x00000030 #define SF_TXMINSPACE_256BYTES 0x00000040 #define SF_TXSKIPLEN_0BYTES 0x00000000 #define SF_TXSKIPLEN_8BYTES 0x00010000 #define SF_TXSKIPLEN_16BYTES 0x00020000 #define SF_TXSKIPLEN_24BYTES 0x00030000 #define SF_TXSKIPLEN_32BYTES 0x00040000 /* TX frame control register */ #define SF_TXFRMCTL_TXTHRESH 0x000000FF #define SF_TXFRMCTL_CPLAFTERTX 0x00000100 #define SF_TXFRMCRL_DEBUG 0x0000FE00 #define SF_TXFRMCTL_STATUS 0x01FF0000 #define SF_TXFRMCTL_MAC_TXIF 0xFE000000 /* TX completion queue control register */ #define SF_TXCQ_THRESH 0x0000000F #define SF_TXCQ_COMMON 0x00000010 #define SF_TXCQ_SIZE 0x00000020 #define SF_TXCQ_WRITEENB 0x00000040 #define SF_TXCQ_USE_64BIT 0x00000080 #define SF_TXCQ_ADDR 0xFFFFFF00 /* RX completion queue control register */ #define SF_RXCQ_THRESH 0x0000000F #define SF_RXCQ_TYPE 0x00000030 #define SF_RXCQ_WRITEENB 0x00000040 #define SF_RXCQ_USE_64BIT 0x00000080 #define SF_RXCQ_ADDR 0xFFFFFF00 #define SF_RXCQTYPE_0 0x00000000 #define SF_RXCQTYPE_1 0x00000010 #define SF_RXCQTYPE_2 0x00000020 #define SF_RXCQTYPE_3 0x00000030 /* TX descriptor queue producer index register */ #define SF_TXDQ_PRODIDX_LOPRIO 0x000007FF #define SF_TXDQ_PRODIDX_HIPRIO 0x07FF0000 /* TX descriptor queue consumer index register */ #define SF_TXDQ_CONSIDX_LOPRIO 0x000007FF #define SF_TXDQ_CONSIDX_HIPRIO 0x07FF0000 /* Completion queue consumer index register */ #define SF_CQ_CONSIDX_RXQ1 0x000003FF #define SF_CQ_CONSIDX_RXTHRMODE 0x00008000 #define SF_CQ_CONSIDX_TXQ 0x03FF0000 #define SF_CQ_CONSIDX_TXTHRMODE 0x80000000 /* Completion queue producer index register */ #define SF_CQ_PRODIDX_RXQ1 0x000003FF #define SF_CQ_PRODIDX_TXQ 0x03FF0000 /* RX completion queue 2 consumer/producer index register */ #define SF_CQ_RXQ2_CONSIDX 0x000003FF #define SF_CQ_RXQ2_RXTHRMODE 0x00008000 #define SF_CQ_RXQ2_PRODIDX 0x03FF0000 #define SF_CQ_RXTHRMODE_INT_ON 0x00008000 #define SF_CQ_RXTHRMODE_INT_OFF 0x00000000 #define SF_CQ_TXTHRMODE_INT_ON 0x80000000 #define SF_CQ_TXTHRMODE_INT_OFF 0x00000000 #define SF_IDX_LO(x) ((x) & 0x000007FF) #define SF_IDX_HI(x) (((x) >> 16) & 0x000007FF) /* RX DMA control register */ #define SF_RXDMA_BURSTSIZE 0x0000007F #define SF_RXDMA_FPTESTMODE 0x00000080 #define SF_RXDMA_HIPRIOTHRESH 0x00000F00 #define SF_RXDMA_RXEARLYTHRESH 0x0001F000 #define SF_RXDMA_DMACRC 0x00040000 #define SF_RXDMA_USEBKUPQUEUE 0x00080000 #define SF_RXDMA_QUEUEMODE 0x00700000 #define SF_RXDMA_RXCQ2_ON 0x00800000 #define SF_RXDMA_CSUMMODE 0x03000000 #define SF_RXDMA_DMAPAUSEPKTS 0x04000000 #define SF_RXDMA_DMACTLPKTS 0x08000000 #define SF_RXDMA_DMACRXERRPKTS 0x10000000 #define SF_RXDMA_DMABADPKTS 0x20000000 #define SF_RXDMA_DMARUNTS 0x40000000 #define SF_RXDMA_REPORTBADPKTS 0x80000000 #define SF_RXDQMODE_Q1ONLY 0x00100000 #define SF_RXDQMODE_Q2_ON_FP 0x00200000 #define SF_RXDQMODE_Q2_ON_SHORT 0x00300000 #define SF_RXDQMODE_Q2_ON_PRIO 0x00400000 #define SF_RXDQMODE_SPLITHDR 0x00500000 #define SF_RXCSUMMODE_IGNORE 0x00000000 #define SF_RXCSUMMODE_REJECT_BAD_TCP 0x01000000 #define SF_RXCSUMMODE_REJECT_BAD_TCPUDP 0x02000000 #define SF_RXCSUMMODE_RSVD 0x03000000 /* RX descriptor queue control registers */ #define SF_RXDQCTL_MINDESCTHR 0x0000007F #define SF_RXDQCTL_Q1_WE 0x00000080 #define SF_RXDQCTL_DESCSPACE 0x00000700 #define SF_RXDQCTL_64BITDADDR 0x00000800 #define SF_RXDQCTL_64BITBADDR 0x00001000 #define SF_RXDQCTL_VARIABLE 0x00002000 #define SF_RXDQCTL_ENTRIES 0x00004000 #define SF_RXDQCTL_PREFETCH 0x00008000 #define SF_RXDQCTL_BUFLEN 0xFFFF0000 #define SF_DESCSPACE_4BYTES 0x00000000 #define SF_DESCSPACE_8BYTES 0x00000100 #define SF_DESCSPACE_16BYTES 0x00000200 #define SF_DESCSPACE_32BYTES 0x00000300 #define SF_DESCSPACE_64BYTES 0x00000400 #define SF_DESCSPACE_128_BYTES 0x00000500 /* RX buffer consumer/producer index registers */ #define SF_RXDQ_PRODIDX 0x000007FF #define SF_RXDQ_CONSIDX 0x07FF0000 /* RX filter control register */ #define SF_RXFILT_PROMISC 0x00000001 #define SF_RXFILT_ALLMULTI 0x00000002 #define SF_RXFILT_BROAD 0x00000004 #define SF_RXFILT_HASHPRIO 0x00000008 #define SF_RXFILT_HASHMODE 0x00000030 #define SF_RXFILT_PERFMODE 0x000000C0 #define SF_RXFILT_VLANMODE 0x00000300 #define SF_RXFILT_WAKEMODE 0x00000C00 #define SF_RXFILT_MULTI_NOBROAD 0x00001000 #define SF_RXFILT_MIN_VLANPRIO 0x0000E000 #define SF_RXFILT_PEFECTPRIO 0xFFFF0000 /* Hash filtering mode */ #define SF_HASHMODE_OFF 0x00000000 #define SF_HASHMODE_WITHVLAN 0x00000010 #define SF_HASHMODE_ANYVLAN 0x00000020 #define SF_HASHMODE_ANY 0x00000030 /* Perfect filtering mode */ #define SF_PERFMODE_OFF 0x00000000 #define SF_PERFMODE_NORMAL 0x00000040 #define SF_PERFMODE_INVERSE 0x00000080 #define SF_PERFMODE_VLAN 0x000000C0 /* VLAN mode */ #define SF_VLANMODE_OFF 0x00000000 #define SF_VLANMODE_NOSTRIP 0x00000100 #define SF_VLANMODE_STRIP 0x00000200 #define SF_VLANMODE_RSVD 0x00000300 /* Wakeup mode */ #define SF_WAKEMODE_OFF 0x00000000 #define SF_WAKEMODE_FILTER 0x00000400 #define SF_WAKEMODE_FP 0x00000800 #define SF_WAKEMODE_HIPRIO 0x00000C00 /* * Extra PCI registers 0x0100 to 0x0FFF */ #define SF_PCI_TARGSTAT 0x0100 #define SF_PCI_MASTSTAT1 0x0104 #define SF_PCI_MASTSTAT2 0x0108 #define SF_PCI_DMAHOSTADDR_LO 0x010C #define SF_BAC_DMADIAG0 0x0110 #define SF_BAC_DMADIAG1 0x0114 #define SF_BAC_DMADIAG2 0x0118 #define SF_BAC_DMADIAG3 0x011C #define SF_PAR0 0x0120 #define SF_PAR1 0x0124 #define SF_PCICB_FUNCEVENT 0x0130 #define SF_PCICB_FUNCEVENT_MASK 0x0134 #define SF_PCICB_FUNCSTATE 0x0138 #define SF_PCICB_FUNCFORCE 0x013C /* * Serial EEPROM registers 0x1000 to 0x1FFF * Presumeably the EEPROM is mapped into this 8K window. */ #define SF_EEADDR_BASE 0x1000 #define SF_EEADDR_MAX 0x1FFF #define SF_EE_NODEADDR 14 /* * MII registers registers 0x2000 to 0x3FFF * There are 32 sets of 32 registers, one set for each possible * PHY address. Each 32 bit register is split into a 16-bit data * port and a couple of status bits. */ #define SF_MIIADDR_BASE 0x2000 #define SF_MIIADDR_MAX 0x3FFF #define SF_MII_BLOCKS 32 #define SF_MII_DATAVALID 0x80000000 #define SF_MII_BUSY 0x40000000 #define SF_MII_DATAPORT 0x0000FFFF #define SF_PHY_REG(phy, reg) \ (SF_MIIADDR_BASE + (phy * SF_MII_BLOCKS * sizeof(u_int32_t)) + \ (reg * sizeof(u_int32_t))) /* * Ethernet extra registers 0x4000 to 0x4FFF */ #define SF_TESTMODE 0x4000 #define SF_RX_FRAMEPROC_CTL 0x4004 #define SF_TX_FRAMEPROC_CTL 0x4008 /* * MAC registers 0x5000 to 0x5FFF */ #define SF_MACCFG_1 0x5000 #define SF_MACCFG_2 0x5004 #define SF_BKTOBKIPG 0x5008 #define SF_NONBKTOBKIPG 0x500C #define SF_COLRETRY 0x5010 #define SF_MAXLEN 0x5014 #define SF_TXNIBBLECNT 0x5018 #define SF_TXBYTECNT 0x501C #define SF_RETXCNT 0x5020 #define SF_RANDNUM 0x5024 #define SF_RANDNUM_MASK 0x5028 #define SF_TOTALTXCNT 0x5034 #define SF_RXBYTECNT 0x5040 #define SF_TXPAUSETIMER 0x5060 #define SF_VLANTYPE 0x5064 #define SF_MIISTATUS 0x5070 #define SF_MACCFG1_HUGEFRAMES 0x00000001 #define SF_MACCFG1_FULLDUPLEX 0x00000002 #define SF_MACCFG1_AUTOPAD 0x00000004 #define SF_MACCFG1_HDJAM 0x00000008 #define SF_MACCFG1_DELAYCRC 0x00000010 #define SF_MACCFG1_NOBACKOFF 0x00000020 #define SF_MACCFG1_LENGTHCHECK 0x00000040 #define SF_MACCFG1_PUREPREAMBLE 0x00000080 #define SF_MACCFG1_PASSALLRX 0x00000100 #define SF_MACCFG1_PREAM_DETCNT 0x00000200 #define SF_MACCFG1_RX_FLOWENB 0x00000400 #define SF_MACCFG1_TX_FLOWENB 0x00000800 #define SF_MACCFG1_TESTMODE 0x00003000 #define SF_MACCFG1_MIILOOPBK 0x00004000 #define SF_MACCFG1_SOFTRESET 0x00008000 /* * These are the recommended IPG nibble counter settings * specified in the Adaptec manual for full duplex and * half duplex operation. */ #define SF_IPGT_FDX 0x15 #define SF_IPGT_HDX 0x11 /* * RX filter registers 0x6000 to 0x6FFF */ #define SF_RXFILT_PERFECT_BASE 0x6000 #define SF_RXFILT_PERFECT_MAX 0x60FF #define SF_RXFILT_PERFECT_SKIP 0x0010 #define SF_RXFILT_PERFECT_CNT 0x0010 #define SF_RXFILT_HASH_BASE 0x6100 #define SF_RXFILT_HASH_MAX 0x62FF #define SF_RXFILT_HASH_SKIP 0x0010 #define SF_RXFILT_HASH_CNT 0x001F #define SF_RXFILT_HASH_ADDROFF 0x0000 #define SF_RXFILT_HASH_PRIOOFF 0x0004 #define SF_RXFILT_HASH_VLANOFF 0x0008 /* * Statistics registers 0x7000 to 0x7FFF */ #define SF_STATS_BASE 0x7000 #define SF_STATS_END 0x7FFF /* * TX frame processor instruction space 0x8000 to 0x9FFF */ /* * RX frame processor instruction space 0xA000 to 0xBFFF */ /* * Ethernet FIFO access space 0xC000 to 0xDFFF */ /* * Reserved 0xE000 to 0xFFFF */ /* * Descriptor data structures. */ /* Receive descriptor formats. */ #define SF_RX_MINSPACING 8 #define SF_RX_DLIST_CNT 256 #define SF_RX_CLIST_CNT 1024 #define SF_RX_HOSTADDR(x) (((x) >> 2) & 0x3FFFFFFF) /* * RX buffer descriptor type 0, 32-bit addressing. Note that we * program the RX buffer queue control register(s) to allow a * descriptor spacing of 16 bytes, which leaves room after each * descriptor to store a pointer to the mbuf for each buffer. */ struct sf_rx_bufdesc_type0 { u_int32_t sf_valid:1, sf_end:1, sf_addrlo:30; u_int32_t sf_pad0; #ifdef __i386__ u_int32_t sf_pad1; #endif struct mbuf *sf_mbuf; }; /* * RX buffer descriptor type 0, 64-bit addressing. */ struct sf_rx_bufdesc_type1 { u_int32_t sf_valid:1, sf_end:1, sf_addrlo:30; u_int32_t sf_addrhi; #ifdef __i386__ u_int32_t sf_pad; #endif struct mbuf *sf_mbuf; }; /* * RX completion descriptor, type 0 (short). */ struct sf_rx_cmpdesc_type0 { u_int32_t sf_len:16, sf_endidx:11, sf_status1:3, sf_id:2; }; /* * RX completion descriptor, type 1 (basic). Includes vlan ID * if this is a vlan-addressed packet, plus extended status. */ struct sf_rx_cmpdesc_type1 { u_int32_t sf_len:16, sf_endidx:11, sf_status1:3, sf_id:2; u_int16_t sf_status2; u_int16_t sf_vlanid; }; /* * RX completion descriptor, type 2 (checksum). Includes partial TCP/IP * checksum instead of vlan tag, plus extended status. */ struct sf_rx_cmpdesc_type2 { u_int32_t sf_len:16, sf_endidx:11, sf_status1:3, sf_id:2; u_int16_t sf_status2; u_int16_t sf_cksum; }; /* * RX completion descriptor type 3 (full). Includes timestamp, partial * TCP/IP checksum, vlan tag plus priority, two extended status fields. */ struct sf_rx_cmpdesc_type3 { u_int32_t sf_len:16, sf_endidx:11, sf_status1:3, sf_id:2; u_int32_t sf_startidx:10, sf_status3:6, sf_status2:16; u_int16_t sf_cksum; u_int16_t sf_vlanid_prio; u_int32_t sf_timestamp; }; #define SF_RXSTAT1_QUEUE 0x1 #define SF_RXSTAT1_FIFOFULL 0x2 #define SF_RXSTAT1_OK 0x4 /* 0=unknown,5=unsupported */ #define SF_RXSTAT2_FRAMETYPE 0x0007 /* 1=IPv4,2=IPv2,3=IPX,4=ICMP */ #define SF_RXSTAT2_UDP 0x0008 #define SF_RXSTAT2_TCP 0x0010 #define SF_RXSTAT2_FRAG 0x0020 #define SF_RXSTAT2_PCSUM_OK 0x0040 /* partial checksum ok */ #define SF_RXSTAT2_CSUM_BAD 0x0080 /* TCP/IP checksum bad */ #define SF_RXSTAT2_CSUM_OK 0x0100 /* TCP/IP checksum ok */ #define SF_RXSTAT2_VLAN 0x0200 #define SF_RXSTAT2_BADRXCODE 0x0400 #define SF_RXSTAT2_DRIBBLE 0x0800 #define SF_RXSTAT2_ISL_CRCERR 0x1000 #define SF_RXSTAT2_CRCERR 0x2000 #define SF_RXSTAT2_HASH 0x4000 #define SF_RXSTAT2_PERFECT 0x8000 #define SF_RXSTAT3_TRAILER 0x01 #define SF_RXSTAT3_HEADER 0x02 #define SF_RXSTAT3_CONTROL 0x04 #define SF_RXSTAT3_PAUSE 0x08 #define SF_RXSTAT3_ISL 0x10 /* * Transmit descriptor formats. * Each transmit descriptor type allows for a skip field at the * start of each structure. The size of the skip field can vary, * however we always set it for 8 bytes, which is enough to hold * a pointer (32 bits on x86, 64-bits on alpha) that we can use * to hold the address of the head of the mbuf chain for the * frame or fragment associated with the descriptor. This saves * us from having to create a separate pointer array to hold * the mbuf addresses. */ #define SF_TX_BUFDESC_ID 0xB #define SF_MAXFRAGS 14 #define SF_TX_MINSPACING 128 #define SF_TX_DLIST_CNT 128 #define SF_TX_DLIST_SIZE 16384 #define SF_TX_SKIPLEN 1 #define SF_TX_CLIST_CNT 1024 struct sf_frag { u_int32_t sf_addr; u_int16_t sf_fraglen; u_int16_t sf_pktlen; }; struct sf_frag_msdos { u_int16_t sf_pktlen; u_int16_t sf_fraglen; u_int32_t sf_addr; }; /* * TX frame descriptor type 0, 32-bit addressing. One descriptor can * be used to map multiple packet fragments. We use this format since * BSD networking fragments packet data across mbuf chains. Note that * the number of fragments can be variable depending on how the descriptor * spacing is specified in the TX descriptor queue control register. * We always use a spacing of 128 bytes, and a skipfield length of 8 * bytes: this means 16 bytes for the descriptor, including the skipfield, * with 121 bytes left for fragment maps. Each fragment requires 8 bytes, * which allows for 14 fragments per descriptor. The total size of the * transmit buffer queue is limited to 16384 bytes, so with a spacing of * 128 bytes per descriptor, we have room for 128 descriptors in the queue. */ struct sf_tx_bufdesc_type0 { #ifdef __i386__ u_int32_t sf_pad; #endif struct mbuf *sf_mbuf; u_int32_t sf_rsvd0:24, sf_crcen:1, sf_caltcp:1, sf_end:1, sf_intr:1, sf_id:4; u_int8_t sf_fragcnt; u_int8_t sf_rsvd2; u_int16_t sf_rsvd1; struct sf_frag sf_frags[14]; }; /* * TX buffer descriptor type 1, 32-bit addressing. Each descriptor * maps a single fragment. */ struct sf_tx_bufdesc_type1 { #ifdef __i386__ u_int32_t sf_pad; #endif struct mbuf *sf_mbuf; u_int32_t sf_fraglen:16, sf_fragcnt:8, sf_crcen:1, sf_caltcp:1, sf_end:1, sf_intr:1, sf_id:4; u_int32_t sf_addr; }; /* * TX buffer descriptor type 2, 64-bit addressing. Each descriptor * maps a single fragment. */ struct sf_tx_bufdesc_type2 { #ifdef __i386__ u_int32_t sf_pad; #endif struct mbuf *sf_mbuf; u_int32_t sf_fraglen:16, sf_fragcnt:8, sf_crcen:1, sf_caltcp:1, sf_end:1, sf_intr:1, sf_id:4; u_int32_t sf_addrlo; u_int32_t sf_addrhi; }; /* TX buffer descriptor type 3 is not defined. */ /* * TX frame descriptor type 4, 32-bit addressing. This is a special * case of the type 0 descriptor, identical except that the fragment * address and length fields are ordered differently. This is done * to optimize copies in MS-DOS and OS/2 drivers. */ struct sf_tx_bufdesc_type4 { #ifdef __i386__ u_int32_t sf_pad; #endif struct mbuf *sf_mbuf; u_int32_t sf_rsvd0:24, sf_crcen:1, sf_caltcp:1, sf_end:1, sf_intr:1, sf_id:4; u_int8_t sf_fragcnt; u_int8_t sf_rsvd2; u_int16_t sf_rsvd1; struct sf_frag_msdos sf_frags[14]; }; /* * Transmit completion queue descriptor formats. */ /* * Transmit DMA completion descriptor, type 0. */ #define SF_TXCMPTYPE_DMA 0x4 struct sf_tx_cmpdesc_type0 { u_int32_t sf_index:15, sf_priority:1, sf_timestamp:13, sf_type:3; }; /* * Transmit completion descriptor, type 1. */ #define SF_TXCMPTYPE_TX 0x5 struct sf_tx_cmpdesc_type1 { u_int32_t sf_index:15, sf_priority:1, sf_txstat:13, sf_type:3; }; #define SF_TXSTAT_CRCERR 0x0001 #define SF_TXSTAT_LENCHECKERR 0x0002 #define SF_TXSTAT_LENRANGEERR 0x0004 #define SF_TXSTAT_TX_OK 0x0008 #define SF_TXSTAT_TX_DEFERED 0x0010 #define SF_TXSTAT_EXCESS_DEFER 0x0020 #define SF_TXSTAT_EXCESS_COLL 0x0040 #define SF_TXSTAT_LATE_COLL 0x0080 #define SF_TXSTAT_TOOBIG 0x0100 #define SF_TXSTAT_TX_UNDERRUN 0x0200 #define SF_TXSTAT_CTLFRAME_OK 0x0400 #define SF_TXSTAT_PAUSEFRAME_OK 0x0800 #define SF_TXSTAT_PAUSED 0x1000 /* Statistics counters. */ struct sf_stats { u_int32_t sf_tx_frames; u_int32_t sf_tx_single_colls; u_int32_t sf_tx_multi_colls; u_int32_t sf_tx_crcerrs; u_int32_t sf_tx_bytes; u_int32_t sf_tx_defered; u_int32_t sf_tx_late_colls; u_int32_t sf_tx_pause_frames; u_int32_t sf_tx_control_frames; u_int32_t sf_tx_excess_colls; u_int32_t sf_tx_excess_defer; u_int32_t sf_tx_mcast_frames; u_int32_t sf_tx_bcast_frames; u_int32_t sf_tx_frames_lost; u_int32_t sf_rx_rx_frames; u_int32_t sf_rx_crcerrs; u_int32_t sf_rx_alignerrs; u_int32_t sf_rx_bytes; u_int32_t sf_rx_control_frames; u_int32_t sf_rx_unsup_control_frames; u_int32_t sf_rx_giants; u_int32_t sf_rx_runts; u_int32_t sf_rx_jabbererrs; u_int32_t sf_rx_pkts_64; u_int32_t sf_rx_pkts_65_127; u_int32_t sf_rx_pkts_128_255; u_int32_t sf_rx_pkts_256_511; u_int32_t sf_rx_pkts_512_1023; u_int32_t sf_rx_pkts_1024_1518; u_int32_t sf_rx_frames_lost; u_int16_t sf_tx_underruns; u_int16_t sf_pad; }; /* * register space access macros */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4(sc->sf_btag, sc->sf_bhandle, reg, val) #define CSR_READ_4(sc, reg) \ bus_space_read_4(sc->sf_btag, sc->sf_bhandle, reg) #define CSR_READ_1(sc, reg) \ bus_space_read_1(sc->sf_btag, sc->sf_bhandle, reg) struct sf_type { u_int16_t sf_vid; u_int16_t sf_did; char *sf_name; }; #define SF_INC(x, y) (x) = (x + 1) % y /* * Note: alignment is important here: each list must be aligned to * a 256-byte boundary. It turns out that each ring is some multiple * of 4K in length, so we can stack them all on top of each other * and just worry about aligning the whole mess. There's one transmit * buffer ring and two receive buffer rings: one RX ring is for small * packets and the other is for large packets. Each buffer ring also * has a companion completion queue. */ struct sf_list_data { struct sf_tx_bufdesc_type0 sf_tx_dlist[SF_TX_DLIST_CNT]; struct sf_tx_cmpdesc_type1 sf_tx_clist[SF_TX_CLIST_CNT]; struct sf_rx_bufdesc_type0 sf_rx_dlist_big[SF_RX_DLIST_CNT]; #ifdef notdef /* * Unfortunately, because the Starfire doesn't allow arbitrary * byte alignment, we have to copy packets in the RX handler in * order to align the payload correctly. This means that we * don't gain anything by having separate large and small descriptor * lists, so for now we don't bother with the small one. */ struct sf_rx_bufdesc_type0 sf_rx_dlist_small[SF_RX_DLIST_CNT]; #endif struct sf_rx_cmpdesc_type3 sf_rx_clist[SF_RX_CLIST_CNT]; }; struct sf_softc { struct device sc_dev; /* generic device structure */ void *sc_ih; /* interrupt handler cookie */ struct arpcom arpcom; /* interface info */ struct ifmedia ifmedia; /* media info */ struct timeout sc_stats_tmo; mii_data_t sc_mii; /* mii bus */ bus_space_handle_t sf_bhandle; /* bus space handle */ bus_space_tag_t sf_btag; /* bus space tag */ void *sf_intrhand; /* interrupt handler cookie */ struct sf_type *sf_info; /* Starfire adapter info */ struct sf_type *sf_pinfo; u_int8_t sf_type; u_int8_t sf_phy_addr; u_int8_t sf_want_auto; u_int8_t sf_autoneg; u_int8_t sf_tx_pend; struct sf_list_data *sf_ldata; caddr_t sf_ldata_ptr; int sf_tx_cnt; u_int8_t sf_link; int sf_if_flags; }; #define SF_TIMEOUT 1000 #ifdef __alpha__ #undef vtophys #define vtophys(va) alpha_XXX_dmamap((vaddr_t)va) #endif